%define rcver %{nil}
%define snapshot %{nil}
%global _hardened_build 1
Summary: WPA/WPA2/IEEE 802.1X Supplicant
Name: wpa_supplicant
Epoch: 1
Version: 2.6
Release: 12%{?dist}
License: BSD
Group: System Environment/Base
Source0: http://w1.fi/releases/%{name}-%{version}%{rcver}%{snapshot}.tar.gz
Source1: build-config
Source2: %{name}.conf
Source3: %{name}.service
Source4: %{name}.sysconfig
Source6: %{name}.logrotate
Source7: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/include/uapi/linux/if_macsec.h?h=v4.10#/if_macsec.h
Source8: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/include/uapi/linux/if_link.h?h=v4.10#/if_link.h
%define build_gui 1
%if 0%{?rhel} >= 1
%define build_gui 0
%endif
# RHEL-7 doesn't define _rundir macro yet
# Fedora 15 onwards uses /run as _rundir
%if 0%{!?_rundir:1}
%define _rundir /run
%endif
# distro specific customization and not suitable for upstream,
# works around busted drivers
Patch0: wpa_supplicant-assoc-timeout.patch
# ensures that debug output gets flushed immediately to help diagnose driver
# bugs, not suitable for upstream
Patch1: wpa_supplicant-flush-debug-output.patch
# disto specific customization for log paths, not suitable for upstream
Patch2: wpa_supplicant-dbus-service-file-args.patch
# quiet an annoying and frequent syslog message
Patch3: wpa_supplicant-quiet-scan-results-message.patch
# distro specific customization for Qt4 build tools, not suitable for upstream
Patch6: wpa_supplicant-gui-qt4.patch
# Less aggressive roaming; signal strength is wildly variable
Patch8: rh837402-less-aggressive-roaming.patch
# backport of macsec series
Patch9: macsec-0001-mka-Move-structs-transmit-receive-_-sa-sc-to-a-commo.patch
Patch10: macsec-0002-mka-Pass-full-structures-down-to-macsec-drivers-pack.patch
Patch11: macsec-0003-mka-Pass-full-structures-down-to-macsec-drivers-tran.patch
Patch12: macsec-0004-mka-Pass-full-structures-down-to-macsec-drivers-rece.patch
Patch13: macsec-0005-mka-Pass-full-structures-down-to-macsec-drivers-tran.patch
Patch14: macsec-0006-mka-Pass-full-structures-down-to-macsec-drivers-rece.patch
Patch15: macsec-0007-mka-Add-driver-op-to-get-macsec-capabilities.patch
Patch16: macsec-0008-mka-Remove-channel-hacks-from-the-stack-and-the-macs.patch
Patch17: macsec-0009-mka-Sync-structs-definitions-with-IEEE-Std-802.1X-20.patch
Patch18: macsec-0010-mka-Add-support-for-removing-SAs.patch
Patch19: macsec-0011-mka-Implement-reference-counting-on-data_key.patch
Patch20: macsec-0012-mka-Fix-getting-capabilities-from-the-driver.patch
Patch21: macsec-0013-wpa_supplicant-Allow-pre-shared-CAK-CKN-pair-for-MKA.patch
Patch22: macsec-0014-mka-Disable-peer-detection-timeout-for-PSK-mode.patch
Patch23: macsec-0015-wpa_supplicant-Add-macsec_integ_only-setting-for-MKA.patch
Patch24: macsec-0016-mka-Add-enable_encrypt-op-and-call-it-from-CP-state-.patch
Patch25: macsec-0017-wpa_supplicant-Allow-configuring-the-MACsec-port-for.patch
Patch26: macsec-0018-drivers-Move-common-definitions-for-wired-drivers-ou.patch
Patch27: macsec-0019-drivers-Move-wired_multicast_membership-to-a-common-.patch
Patch28: macsec-0020-drivers-Move-driver_wired_multi-to-a-common-file.patch
Patch29: macsec-0021-drivers-Move-driver_wired_get_ifflags-to-a-common-fi.patch
Patch30: macsec-0022-drivers-Move-driver_wired_set_ifflags-to-a-common-fi.patch
Patch31: macsec-0023-drivers-Move-driver_wired_get_ifstatus-to-a-common-f.patch
Patch32: macsec-0024-drivers-Move-driver_wired_init_common-to-a-common-fi.patch
Patch33: macsec-0025-drivers-Move-driver_wired_deinit_common-to-a-common-.patch
Patch34: macsec-0026-drivers-Move-driver_wired_get_capa-to-a-common-file.patch
Patch35: macsec-0027-drivers-Move-driver_wired_get_bssid-to-a-common-file.patch
Patch36: macsec-0028-drivers-Move-driver_wired_get_ssid-to-a-common-file.patch
Patch37: macsec-0029-macsec_linux-Add-a-driver-for-macsec-on-Linux-kernel.patch
Patch38: macsec-0030-mka-Remove-references-to-macsec_qca-from-wpa_supplic.patch
Patch39: macsec-0031-PAE-Make-KaY-specific-details-available-via-control-.patch
Patch40: macsec-0032-mka-Make-MKA-actor-priority-configurable.patch
Patch41: macsec-0033-mka-Fix-an-incorrect-update-of-participant-to_use_sa.patch
Patch42: macsec-0034-mka-Some-bug-fixes-for-MACsec-in-PSK-mode.patch
Patch43: macsec-0035-mka-Send-MKPDUs-forever-if-mode-is-PSK.patch
# upstream patch not in 2.6
Patch44: rh1447073-nl80211-Fix-race-condition-in-detecting-MAC-change.patch
Patch45: rh1440646-macsec_linux-Fix-NULL-pointer-dereference-on-error-c.patch
Patch46: rh1489919-mka-Add-error-handling-for-secy_init_macsec-calls.patch
Patch47: rh1495527-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
Patch48: rh1495527-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
Patch49: rh1495527-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
Patch50: rh1495527-0004-Prevent-installation-of-an-all-zero-TK.patch
Patch51: rh1495527-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
Patch52: rh1495527-0006-TDLS-Reject-TPK-TK-reconfiguration.patch
Patch53: rh1495527-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
Patch54: rh1495527-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
Patch55: rh1531254-common-Avoid-conflict-with-__bitwise-macro-from-linu.patch
Patch56: rh1434434-wpa_supplicant-Don-t-reply-to-EAPOL-if-pkt_type-is-P.patch
Patch57: rh1490885-fix-auth-failure-when-the-mac-is-updated-externally.patch
Patch58: rh1500442-wpa_supplicant-Fix-memory-leaks-in-ieee802_1x_create.patch
Patch59: rh1619553-0001-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch
URL: http://w1.fi/wpa_supplicant/
%if %{build_gui}
BuildRequires: qt-devel >= 4.0
%endif
BuildRequires: openssl-devel
BuildRequires: readline-devel
BuildRequires: dbus-devel
BuildRequires: libnl3-devel
BuildRequires: systemd-units
BuildRequires: docbook-utils
Requires(post): systemd-sysv
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
%description
wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support
for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
component that is used in the client stations. It implements key negotiation
with a WPA Authenticator and it controls the roaming and IEEE 802.11
authentication/association of the wlan driver.
%if %{build_gui}
%package gui
Summary: Graphical User Interface for %{name}
Group: Applications/System
%description gui
Graphical User Interface for wpa_supplicant written using QT
%endif
%prep
%setup -q -n %{name}-%{version}%{rcver}
mkdir -p src/linux
cp %{SOURCE7} src/linux/if_macsec.h
cp %{SOURCE8} src/linux/if_link.h
%patch0 -p1 -b .assoc-timeout
%patch1 -p1 -b .flush-debug-output
%patch2 -p1 -b .dbus-service-file
%patch3 -p1 -b .quiet-scan-results-msg
%patch6 -p1 -b .qt4
%patch8 -p1 -b .rh837402-less-aggressive-roaming
%patch9 -p1 -b .macsec-0001
%patch10 -p1 -b .macsec-0002
%patch11 -p1 -b .macsec-0003
%patch12 -p1 -b .macsec-0004
%patch13 -p1 -b .macsec-0005
%patch14 -p1 -b .macsec-0006
%patch15 -p1 -b .macsec-0007
%patch16 -p1 -b .macsec-0008
%patch17 -p1 -b .macsec-0009
%patch18 -p1 -b .macsec-0010
%patch19 -p1 -b .macsec-0011
%patch20 -p1 -b .macsec-0012
%patch21 -p1 -b .macsec-0013
%patch22 -p1 -b .macsec-0014
%patch23 -p1 -b .macsec-0015
%patch24 -p1 -b .macsec-0016
%patch25 -p1 -b .macsec-0017
%patch26 -p1 -b .macsec-0018
%patch27 -p1 -b .macsec-0019
%patch28 -p1 -b .macsec-0020
%patch29 -p1 -b .macsec-0021
%patch30 -p1 -b .macsec-0022
%patch31 -p1 -b .macsec-0023
%patch32 -p1 -b .macsec-0024
%patch33 -p1 -b .macsec-0025
%patch34 -p1 -b .macsec-0026
%patch35 -p1 -b .macsec-0027
%patch36 -p1 -b .macsec-0028
%patch37 -p1 -b .macsec-0029
%patch38 -p1 -b .macsec-0030
%patch39 -p1 -b .macsec-0031
%patch40 -p1 -b .macsec-0032
%patch41 -p1 -b .macsec-0033
%patch42 -p1 -b .macsec-0034
%patch43 -p1 -b .macsec-0035
%patch44 -p1 -b .rh1447073-detect-mac-change
%patch45 -p1 -b .rh1440646-macsec-segfault
%patch46 -p1 -b .rh1489919-macsec-eapol-segfault
%patch47 -p1 -b .rh1495527-0001
%patch48 -p1 -b .rh1495527-0002
%patch49 -p1 -b .rh1495527-0003
%patch50 -p1 -b .rh1495527-0004
%patch51 -p1 -b .rh1495527-0005
%patch52 -p1 -b .rh1495527-0006
%patch53 -p1 -b .rh1495527-0007
%patch54 -p1 -b .rh1495527-0008
%patch55 -p1 -b .rh1531254-fix-bitwise-redefined
%patch56 -p1 -b .rh1434434-fix-pkt_otherhost
%patch57 -p1 -b .rh1490885-mac-changed-event
%patch58 -p1 -b .rh1500442-macsec-memleak
%patch59 -p1 -b .rh1619553-ignore-unauth-eapol
%build
pushd wpa_supplicant
cp %{SOURCE1} .config
CFLAGS="${CFLAGS:-%optflags} -fPIE -DPIE" ; export CFLAGS ;
CXXFLAGS="${CXXFLAGS:-%optflags} -fPIE -DPIE" ; export CXXFLAGS ;
LDFLAGS="${LDFLAGS:-%optflags} -pie -Wl,-z,now,-z,relro" ; export LDFLAGS ;
# yes, BINDIR=_sbindir
BINDIR="%{_sbindir}" ; export BINDIR ;
LIBDIR="%{_libdir}" ; export LIBDIR ;
make %{_smp_mflags} V=1
%if %{build_gui}
QTDIR=%{_libdir}/qt4 make wpa_gui-qt4 %{_smp_mflags}
%endif
make eapol_test V=1
popd
pushd wpa_supplicant/doc/docbook
make man V=1
popd
%install
# init scripts
install -D -m 0644 %{SOURCE3} %{buildroot}/%{_unitdir}/%{name}.service
install -D -m 0644 %{SOURCE4} %{buildroot}/%{_sysconfdir}/sysconfig/%{name}
install -D -m 0644 %{SOURCE6} %{buildroot}/%{_sysconfdir}/logrotate.d/%{name}
# config
install -D -m 0600 %{SOURCE2} %{buildroot}/%{_sysconfdir}/%{name}/%{name}.conf
# binary
install -d %{buildroot}/%{_sbindir}
install -m 0755 %{name}/wpa_passphrase %{buildroot}/%{_sbindir}
install -m 0755 %{name}/wpa_cli %{buildroot}/%{_sbindir}
install -m 0755 %{name}/wpa_supplicant %{buildroot}/%{_sbindir}
install -m 0755 %{name}/eapol_test %{buildroot}/%{_sbindir}
install -D -m 0644 %{name}/dbus/dbus-wpa_supplicant.conf %{buildroot}/%{_sysconfdir}/dbus-1/system.d/wpa_supplicant.conf
install -D -m 0644 %{name}/dbus/fi.w1.wpa_supplicant1.service %{buildroot}/%{_datadir}/dbus-1/system-services/fi.w1.wpa_supplicant1.service
install -D -m 0644 %{name}/dbus/fi.epitest.hostap.WPASupplicant.service %{buildroot}/%{_datadir}/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service
%if %{build_gui}
# gui
install -d %{buildroot}/%{_bindir}
install -m 0755 %{name}/wpa_gui-qt4/wpa_gui %{buildroot}/%{_bindir}
%endif
install -d -m 0755 %{buildroot}%{_rundir}/%{name}
# man pages
install -d %{buildroot}%{_mandir}/man{5,8}
install -m 0644 %{name}/doc/docbook/*.8 %{buildroot}%{_mandir}/man8
install -m 0644 %{name}/doc/docbook/*.5 %{buildroot}%{_mandir}/man5
# some cleanup in docs and examples
rm -f %{name}/doc/.cvsignore
rm -rf %{name}/doc/docbook
chmod -R 0644 %{name}/examples/*.py
%post
if [ $1 -eq 1 ] ; then
# Initial installation
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
fi
%preun
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
/bin/systemctl --no-reload disable wpa_supplicant.service > /dev/null 2>&1 || :
/bin/systemctl stop wpa_supplicant.service > /dev/null 2>&1 || :
fi
%triggerun -- wpa_supplicant < 0.7.3-10
# Save the current service runlevel info
# User must manually run systemd-sysv-convert --apply wpa_supplicant
# to migrate them to systemd targets
/usr/bin/systemd-sysv-convert --save wpa_supplicant >/dev/null 2>&1 ||:
# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del wpa_supplicant >/dev/null 2>&1 || :
/bin/systemctl try-restart wpa_supplicant.service >/dev/null 2>&1 || :
%files
%license COPYING
%doc %{name}/ChangeLog README %{name}/eap_testing.txt %{name}/todo.txt %{name}/wpa_supplicant.conf %{name}/examples
%config(noreplace) %{_sysconfdir}/%{name}/%{name}.conf
%config(noreplace) %{_sysconfdir}/sysconfig/%{name}
%config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
%{_unitdir}/%{name}.service
%{_sysconfdir}/dbus-1/system.d/%{name}.conf
%{_datadir}/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service
%{_datadir}/dbus-1/system-services/fi.w1.wpa_supplicant1.service
%{_sbindir}/wpa_passphrase
%{_sbindir}/wpa_supplicant
%{_sbindir}/wpa_cli
%{_sbindir}/eapol_test
%ghost %attr(755,root,root) %verify(not owner group) %{_rundir}/%{name}
%dir %{_sysconfdir}/%{name}
%{_mandir}/man8/*
%{_mandir}/man5/*
%if %{build_gui}
%files gui
%{_bindir}/wpa_gui
%endif
%changelog
* Tue Aug 28 2018 Davide Caratti <dcaratti@redhat.com> - 1:2.6-12
- Ignore unauthenticated encrypted EAPOL-Key data (CVE-2018-14526)
* Fri Jun 1 2018 Davide Caratti <dcaratti@redhat.com> - 1:2.6-11
- Better handling of /run/wpa_supplicant (rh #1507919)
* Fri May 18 2018 Davide Caratti <dcaratti@redhat.com> - 1:2.6-10
- Fix memory leak when macsec MKA/PSK is used (rh #1500442)
- Fix authentication failure when the MAC is updated externally (rh #1490885)
- Let the kernel discard EAPOL if packet type is PACKET_OTHERHOST (rh #1434434)
- Don't restart wpa_supplicant.service on package upgrade (rh #1505404)
- Don't own a directory in /run/ (rh #1507919)
* Mon Jan 8 2018 Davide Caratti <dcaratti@redhat.com> - 1:2.6-9
- Fix RPMDiff failures on ppc (rh #1532320)
* Fri Jan 5 2018 Davide Caratti <dcaratti@redhat.com> - 1:2.6-8
- Fix build issue on kernel-alt (rh #1531254)
* Wed Oct 18 2017 Davide Caratti <dcaratti@redhat.com> - 1:2.6-7
- avoid key reinstallation (CVE-2017-13077, CVE-2017-13078, CVE-2017-13079,
CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13086,
CVE-2017-13087, CVE-2017-13088)
* Thu Oct 05 2017 Davide Caratti <dcaratti@redhat.com> - 1:2.6-6
- Fix segmentation fault on EAPOL RX if macsec.ko is not loaded (rh #1489919)
* Wed May 17 2017 Davide Caratti <dcaratti@redhat.com> - 1:2.6-5
- macsec: Fix segmentation fault in case macsec.ko is not loaded (rh #1440646)
- nl80211: Fix race condition in detecting MAC change (rh #1447073)
* Mon Apr 3 2017 Lubomir Rintel <lrintel@redhat.com> - 1:2.6-4
- Include MACsec headers (rh #1438007)
* Fri Mar 10 2017 Davide Caratti <dcaratti@redhat.com> - 1:2.6-3
- Fix coverity failures (rh #1430407)
* Tue Mar 7 2017 Davide Caratti <dcaratti@redhat.com> - 1:2.6-2
- Backport support for IEEE 802.1AE MACsec (rh #1338005)
* Fri Feb 10 2017 Davide Caratti <dcaratti@redhat.com> - 1:2.6-1
- Update to 2.6 (rh #1404793)
* Fri Dec 16 2016 Davide Caratti <dcaratti@redhat.com> - 1:2.0-22
- bump revision for RHEL7.4 rebuild
* Tue Aug 9 2016 Davide Caratti <dcaratti@redhat.com> - 1:2.0-21
- fix wpa_supplicant.sysconfig to avoid duplicate -u and -f arguments (rh #1351388)
* Mon Mar 21 2016 Lubomir Rintel <lrintel@redhat.com> - 1:2.0-20
- D-Bus: Don't do <deny send_interface="..." /> in dbus service file (rh #1319796)
* Mon Jan 11 2016 Lubomir Rintel <lrintel@redhat.com> - 1:2.0-19
- nl80211: resubscribe to netlink events when cfg80211 gets re-added (rh #1085473)
* Tue Dec 1 2015 Jiří Klimeš <jklimes@redhat.com> - 1:2.0-18
- spec: do not install wpa_supplicant.service as executable (rh #1286965)
* Wed May 20 2015 Jiří Klimeš <jklimes@redhat.com> - 1:2.0-17
- AP WMM: Fix integer underflow in WMM Action frame parser (rh #1221178) (rh #1222016)
* Tue Apr 28 2015 Dan Winship <danw@redhat.com> - 1:2.0-16
- P2P: Validate SSID element length before copying it (CVE-2015-1863)
* Wed Jan 14 2015 <danw@redhat.com> - 1:2.0-15
- Add domain_match config option from upstream (rh #1178263)
- Include peer certificate in EAP events for use by clients
* Wed Oct 22 2014 Dan Williams <dcbw@redhat.com> - 1:2.0-14
- Use os_exec() for action script execution (CVE-2014-3686)
* Mon Jul 14 2014 Thomas Haller <thaller@redhat.com - 1:2.0-13
- cleanup spec file and remove obsolete libeap parts (rh #1085240)
* Fri Jan 24 2014 Daniel Mach <dmach@redhat.com> - 1:2.0-12
- Mass rebuild 2014-01-24
* Mon Jan 20 2014 Dan Williams <dcbw@redhat.com> - 1:2.0-11
- Add eapol_test manpage (rh #948453)
* Fri Dec 27 2013 Daniel Mach <dmach@redhat.com> - 1:2.0-10
- Mass rebuild 2013-12-27
* Mon Dec 16 2013 Dan Williams <dcbw@redhat.com> - 1:2.0-9
- Don't disconnect when PMKSA cache gets too large (rh #1032758) (rh #1016707)
* Mon Dec 16 2013 Dan Winship <danw@redhat.com> - 1:2.0-8
- Fill in some gaps in the man pages (rh #948453)
* Wed Jul 10 2013 Dan Williams <dcbw@redhat.com> - 1:2.0-6
- Enable full RELRO/PIE/PIC for wpa_supplicant and libeap
- Fix changelog dates
* Wed Jul 10 2013 Dan Williams <dcbw@redhat.com> - 1:2.0-5
- Build and package eapol_test (rh #638218)
* Wed Jul 10 2013 Dan Williams <dcbw@redhat.com> - 1:2.0-4
- Disable WiMAX libeap hack for RHEL
* Wed May 15 2013 Dan Williams <dcbw@redhat.com> - 1:2.0-3
- Enable HT (802.11n) for AP mode
* Tue May 7 2013 Dan Williams <dcbw@redhat.com> - 1:2.0-2
- Use hardened build macros and ensure they apply to libeap too
* Mon May 6 2013 Dan Williams <dcbw@redhat.com> - 1:2.0-1
- Update to 2.0
- Be less aggressive when roaming due to signal strength changes (rh #837402)
* Mon Apr 1 2013 Dan Williams <dcbw@redhat.com> - 1:1.1-1
- Update to 1.1
- Be less aggressive when roaming due to signal strength changes
* Fri Feb 15 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:1.0-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
* Sun Jan 20 2013 Dan Horák <dan@danny.cz> - 1:1.0-3
- rebuilt again for fixed soname in libnl3
* Sun Jan 20 2013 Kalev Lember <kalevlember@gmail.com> - 1:1.0-2
- Rebuilt for libnl3
* Wed Aug 29 2012 Dan Williams <dcbw@redhat.com> - 1:1.0-1
- Enable lightweight AP mode support
- Enable P2P (WiFi Direct) support
- Enable RSN IBSS/AdHoc support
* Sun Jul 22 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:1.0-0.5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Tue May 1 2012 Dan Williams <dcbw@redhat.com> - 1:1.0-0.4
- Update to wpa_supplicant 1.0-rc3
- Fix systemd target dependencies (rh #815091)
* Fri Mar 2 2012 Dan Williams <dcbw@redhat.com> - 1:1.0-0.3
- Update to latest 1.0 git snapshot
- Rebuild against libnl3
* Thu Feb 2 2012 Dan Williams <dcbw@redhat.com> - 1:1.0-0.2
- Fix driver fallback for non nl80211-based drivers (rh #783712)
* Tue Jan 10 2012 Dan Williams <dcbw@redhat.com> - 1:1.0-0.1
- Update to 1.0-rc1 + git
* Fri Sep 9 2011 Tom Callaway <spot@fedoraproject.org> - 1:0.7.3-11
- add missing systemd scriptlets
* Thu Sep 8 2011 Tom Callaway <spot@fedoraproject.org> - 1:0.7.3-10
- convert to systemd
* Wed Jul 27 2011 Dan Williams <dcbw@redhat.com> - 1:0.7.3-9
- Fix various crashes with D-Bus interface (rh #678625) (rh #725517)
* Tue May 3 2011 Dan Williams <dcbw@redhat.com> - 1:0.7.3-8
- Don't crash when trying to access invalid properties via D-Bus (rh #678625)
* Mon May 2 2011 Dan Williams <dcbw@redhat.com> - 1:0.7.3-7
- Make examples read-only to avoid erroneous python dependency (rh #687952)
* Tue Apr 19 2011 Bill Nottingham <notting@redhat.com> - 1:0.7.3-6
- Fix EAP patch to only apply when building libeap
* Fri Mar 25 2011 Bill Nottingham <notting@redhat.com> - 1:0.7.3-5
- Add libeap/libeap-devel subpackge for WiMAX usage
* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:0.7.3-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
* Tue Jan 11 2011 Dan Williams <dcbw@redhat.com> - 1:0.7.3-3
- Enable EAP-TNC (rh #659038)
* Wed Dec 15 2010 Dan Williams <dcbw@redhat.com> - 1:0.7.3-2
- Enable the bgscan_simple plugin
* Wed Dec 8 2010 Dan Williams <dcbw@redhat.com> - 1:0.7.3-1
- Update to 0.7.3
- Drop upstreamed and backported patches
- Drop support for Qt3
* Thu Oct 7 2010 Peter Lemenkov <lemenkov@gmail.com> - 1:0.6.8-11
- Added comments to some patches (see rhbz #226544#c17)
- Shortened %%install section a bit
* Thu May 13 2010 Dan Williams <dcbw@redhat.com> - 1:0.6.8-10
- Remove prereq on chkconfig
- Build GUI with qt4 for rawhide (rh #537105)
* Thu May 6 2010 Dan Williams <dcbw@redhat.com> - 1:0.6.8-9
- Fix crash when interfaces are removed (like suspend/resume) (rh #589507)
* Wed Jan 6 2010 Dan Williams <dcbw@redhat.com> - 1:0.6.8-8
- Fix handling of newer PKCS#12 files (rh #541924)
* Sun Nov 29 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.8-7
- Fix supplicant initscript return value (rh #521807)
- Fix race when connecting to WPA-Enterprise/802.1x-enabled access points (rh #508509)
- Don't double-scan when attempting to associate
* Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 1:0.6.8-6
- rebuilt with new openssl
* Mon Jul 27 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:0.6.8-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
* Wed May 13 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.8-4
- Let D-Bus clients know when the supplicant is scanning
* Tue May 12 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.8-3
- Ensure the supplicant starts and ends with clean driver state
- Handle driver disconnect spammage by forcibly clearing SSID
- Don't switch access points unless the current association is dire (rh #493745)
* Tue May 12 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.8-2
- Avoid creating bogus Ad-Hoc networks when forcing the driver to disconnect (rh #497771)
* Mon Mar 9 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.8-1
- Update to latest upstream release
* Wed Feb 25 2009 Colin Walters <walters@verbum.org> - 1:0.6.7-4
- Add patch from upstream to suppress unrequested replies, this
quiets a dbus warning.
* Fri Feb 6 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.7-3
- Fix scan result retrieval in very dense wifi environments
* Fri Feb 6 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.7-2
- Ensure that drivers don't retry association when they aren't supposed to
* Fri Jan 30 2009 Dan Williams <dcbw@redhat.com> - 1:0.6.7-1
- Fix PEAP connections to Windows Server 2008 authenticators (rh #465022)
- Stop supplicant on uninstall (rh #447843)
- Suppress scan results message in logs (rh #466601)
* Sun Jan 18 2009 Tomas Mraz <tmraz@redhat.com> - 1:0.6.4-3
- rebuild with new openssl
* Wed Oct 15 2008 Dan Williams <dcbw@redhat.com> - 1:0.6.4-2
- Handle encryption keys correctly when switching 802.11 modes (rh #459399)
- Better scanning behavior on resume from suspend/hibernate
- Better interaction with newer kernels and drivers
* Wed Aug 27 2008 Dan Williams <dcbw@redhat.com> - 1:0.6.4-1
- Update to 0.6.4
- Remove 'hostap', 'madwifi', and 'prism54' drivers; use standard 'wext' instead
- Drop upstreamed patches
* Tue Jun 10 2008 Dan Williams <dcbw@redhat.com> - 1:0.6.3-6
- Fix 802.11a frequency bug
- Always schedule specific SSID scans to help find hidden APs
- Properly switch between modes on mac80211 drivers
- Give adhoc connections more time to assocate
* Mon Mar 10 2008 Christopher Aillon <caillon@redhat.com> - 1:0.6.3-5
- BuildRequires qt3-devel
* Sat Mar 8 2008 Dan Williams <dcbw@redhat.com> - 1:0.6.3-4
- Fix log file path in service config file
* Thu Mar 6 2008 Dan Williams <dcbw@redhat.com> - 1:0.6.3-3
- Don't start the supplicant by default when installed (rh #436380)
* Tue Mar 4 2008 Dan Williams <dcbw@redhat.com> - 1:0.6.3-2
- Fix a potential use-after-free in the D-Bus byte array demarshalling code
* Mon Mar 3 2008 Dan Williams <dcbw@redhat.com> - 1:0.6.3-1
- Update to latest development release; remove upstreamed patches
* Fri Feb 22 2008 Dan Williams <dcbw@redhat.com> 1:0.5.7-23
- Fix gcc 4.3 rebuild issues
* Mon Feb 18 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1:0.5.7-22
- Autorebuild for GCC 4.3
* Tue Dec 25 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-21
- Backport 'frequency' option for Ad-Hoc network configs
* Mon Dec 24 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-20
- Fix LSB initscript header to ensure 'messagebus' is started first (rh #244029)
* Thu Dec 6 2007 Dan Williams <dcbw@redhat.com> - 1:0.5.7-19
- Fix two leaks when signalling state and scan results (rh #408141)
- Add logrotate config file (rh #404181)
- Add new LSB initscript header to initscript with correct deps (rh #244029)
- Move other runtime arguments to /etc/sysconfig/wpa_supplicant
- Start after messagebus service (rh #385191)
- Fix initscript 'condrestart' command (rh #217281)
* Tue Dec 4 2007 Matthias Clasen <mclasen@redhat.com> - 1:0.5.7-18
- Rebuild against new openssl
* Tue Dec 4 2007 Ville Skyttä <ville.skytta at iki.fi> - 1:0.5.7-17
- Group: Application/System -> Applications/System in -gui.
* Tue Nov 13 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-16
- Add IW_ENCODE_TEMP patch for airo driver and Dynamic WEP
- Fix error in wpa_supplicant-0.5.7-ignore-dup-ca-cert-addition.patch that
caused the last error to not be printed
- Fix wpa_supplicant-0.5.7-ignore-dup-ca-cert-addition.patch to ignore
duplicate cert additions for all certs and keys
- Change license to BSD due to linkage against OpenSSL since there is no
OpenSSL exception in the GPLv2 license text that upstream ships
* Sun Oct 28 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-15
- Fix Dynamic WEP associations with mac80211-based drivers
* Sun Oct 28 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-14
- Don't error an association on duplicate CA cert additions
* Wed Oct 24 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-13
- Correctly set the length of blobs added via the D-Bus interface
* Wed Oct 24 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-12
- Fix conversion of byte arrays to strings by ensuring the buffer is NULL
terminated after conversion
* Sat Oct 20 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-11
- Add BLOB support to the D-Bus interface
- Fix D-Bus interface permissions so that only root can use the wpa_supplicant
D-Bus interface
* Tue Oct 9 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-10
- Don't segfault with dbus control interface enabled and invalid network
interface (rh #310531)
* Tue Sep 25 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-9
- Always allow explicit wireless scans triggered from a control interface
* Thu Sep 20 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-8
- Change system bus activation file name to work around D-Bus bug that fails
to launch services unless their .service file is named the same as the
service itself
* Fri Aug 24 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-7
- Make SIGUSR1 change debug level on-the-fly; useful in combination with
the -f switch to log output to /var/log/wpa_supplicant.log
- Stop stripping binaries on install so we get debuginfo packages
- Remove service start requirement for interfaces & devices from sysconfig file,
since wpa_supplicant's D-Bus interface is now turned on
* Fri Aug 17 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-6
- Fix compilation with RPM_OPT_FLAGS (rh #249951)
- Make debug output to logfile a runtime option
* Fri Aug 17 2007 Christopher Aillon <caillon@redhat.com> - 0.5.7-5
- Update the license tag
* Tue Jun 19 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-4
- Fix initscripts to use -Dwext by default, be more verbose on startup
(rh #244511)
* Mon Jun 4 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-3
- Fix buffer overflow by removing syslog patch (#rh242455)
* Mon Apr 9 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-2
- Add patch to send output to syslog
* Thu Mar 15 2007 Dan Williams <dcbw@redhat.com> - 0.5.7-1
- Update to 0.5.7 stable release
* Fri Oct 27 2006 Dan Williams <dcbw@redhat.com> - 0.4.9-1
- Update to 0.4.9 for WE-21 fixes, remove upstreamed patches
- Don't package doc/ because they aren't actually wpa_supplicant user documentation,
and becuase it pulls in perl
* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.4.8-10.1
- rebuild
* Thu Apr 27 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-10
- Add fix for madwifi and WEP (wpa_supplicant/hostap bud #140) (#rh190075#)
- Fix up madwifi-ng private ioctl()s for r1331 and later
- Update madwifi headers to r1475
* Tue Apr 25 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-9
- Enable Wired driver, PKCS12, and Smartcard options (#rh189805#)
* Tue Apr 11 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-8
- Fix control interface key obfuscation a bit
* Sun Apr 2 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-7
- Work around older & incorrect drivers that return null-terminated SSIDs
* Mon Mar 27 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-6
- Add patch to make orinoco happy with WEP keys
- Enable Prism54-specific driver
- Disable ipw-specific driver; ipw2x00 should be using WEXT instead
* Fri Mar 3 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-5
- Increase association timeout, mainly for drivers that don't
fully support WPA ioctls yet
* Fri Mar 3 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-4
- Add additional BuildRequires #rh181914#
- Add prereq on chkconfig #rh182905# #rh182906#
- Own /var/run/wpa_supplicant and /etc/wpa_supplicant #rh183696#
* Wed Mar 1 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-3
- Install wpa_passphrase too #rh183480#
* Mon Feb 27 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-2
- Don't expose private data on the control interface unless requested
* Fri Feb 24 2006 Dan Williams <dcbw@redhat.com> - 0.4.8-1
- Downgrade to 0.4.8 stable release rather than a dev release
* Sun Feb 12 2006 Dan Williams <dcbw@redhat.com> - 0.5.1-3
- Documentation cleanup (Terje Rosten <terje.rosten@ntnu.no>)
* Sun Feb 12 2006 Dan Williams <dcbw@redhat.com> - 0.5.1-2
- Move initscript to /etc/rc.d/init.d
* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 0.5.1-1.2
- bump again for double-long bug on ppc(64)
* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 0.5.1-1.1
- rebuilt for new gcc4.1 snapshot and glibc changes
* Sun Feb 5 2006 Dan Williams <dcbw@redhat.com> 0.5.1-1
- Update to 0.5.1
- Add WE auth fallback to actually work with older drivers
* Thu Jan 26 2006 Dan Williams <dcbw@redhat.com> 0.4.7-2
- Bring package into Fedora Core
- Add ap_scan control interface patch
- Enable madwifi-ng driver
* Sun Jan 15 2006 Douglas E. Warner <silfreed@silfreed.net> 0.4.7-1
- upgrade to 0.4.7
- added package w/ wpa_gui in it
* Mon Nov 14 2005 Douglas E. Warner <silfreed@silfreed.net> 0.4.6-1
- upgrade to 0.4.6
- adding ctrl interface changes recommended
by Hugo Paredes <hugo.paredes@e-know.org>
* Sun Oct 9 2005 Douglas E. Warner <silfreed@silfreed.net> 0.4.5-1
- upgrade to 0.4.5
- updated config file wpa_supplicant is built with
especially, the ipw2100 driver changed to just ipw
and enabled a bunch more EAP
- disabled dist tag
* Thu Jun 30 2005 Douglas E. Warner <silfreed@silfreed.net> 0.4.2-3
- fix typo in init script
* Thu Jun 30 2005 Douglas E. Warner <silfreed@silfreed.net> 0.4.2-2
- fixing init script using fedora-extras' template
- removing chkconfig default startup
* Tue Jun 21 2005 Douglas E. Warner <silfreed@silfreed.net> 0.4.2-1
- upgrade to 0.4.2
- new sample conf file that will use any unrestricted AP
- make sysconfig config entry
- new BuildRoot for Fedora Extras
- adding dist tag to Release
* Fri May 06 2005 Douglas E. Warner <silfreed@silfreed.net> 0.3.8-1
- upgrade to 0.3.8
* Thu Feb 10 2005 Douglas E. Warner <silfreed@silfreed.net> 0.3.6-2
- compile ipw driver in
* Wed Feb 09 2005 Douglas E. Warner <silfreed@silfreed.net> 0.3.6-1
- upgrade to 0.3.6
* Thu Dec 23 2004 Douglas E. Warner <silfreed@silfreed.net> 0.2.5-4
- fixing init script
* Mon Dec 20 2004 Douglas E. Warner <silfreed@silfreed.net> 0.2.5-3
- fixing init script
- adding post/preun items to add/remove via chkconfig
* Mon Dec 20 2004 Douglas E. Warner <silfreed@silfreed.net> 0.2.5-2
- adding sysV scripts
* Mon Dec 20 2004 Douglas E. Warner <silfreed@silfreed.net> 0.2.5-1
- Initial RPM release.