Blob Blame History Raw
# ======================================================
# Conditionals and other variables controlling the build
# ======================================================

# Note that the bcond macros are named for the CLI option they create.
# "%%bcond_without" means "ENABLE by default and create a --without option"

# Ability to reuse RPM-installed pip using rewheel
%bcond_with rewheel

# Extra build for debugging the interpreter or C-API extensions
# (the -debug subpackages)
%bcond_with debug_build

# Remove extra packages
%bcond_with tk_and_tools

%global unicode ucs4

%global python python2

%global pybasever 2.7
%global pylibdir %{_libdir}/python%{pybasever}
%global tools_dir %{pylibdir}/Tools
%global demo_dir %{pylibdir}/Demo
%global doc_tools_dir %{pylibdir}/Doc/tools
%global dynload_dir %{pylibdir}/lib-dynload
%global site_packages %{pylibdir}/site-packages

# Python's configure script defines SOVERSION, and this is used in the Makefile
# to determine INSTSONAME, the name of the libpython DSO:
#   LDLIBRARY='libpython$(VERSION).so'
#   INSTSONAME="$LDLIBRARY".$SOVERSION
# We mirror this here in order to make it easier to add the -gdb.py hooks.
# (if these get out of sync, the payload of the libs subpackage will fail
# and halt the build)
%global py_SOVERSION 1.0
%global py_INSTSONAME_optimized libpython%{pybasever}.so.%{py_SOVERSION}
%global py_INSTSONAME_debug     libpython%{pybasever}_d.so.%{py_SOVERSION}

# Disabled for now:
%global with_huntrleaks 0

%global with_gdb_hooks 1

%global with_systemtap 1

# some arches don't have valgrind so we need to disable its support on them
%ifarch %{valgrind_arches}
%global with_valgrind 1
%else
%global with_valgrind 0
%endif

%global with_gdbm 1

%if 0%{?_module_build}
%global with_valgrind 0
%global with_systemtap 0

# (Don't) Run the test suite in %%check
%bcond_with tests
%else
# Run the test suite in %%check
%bcond_without tests
%endif

# Disable automatic bytecompilation. The python2.7 binary is not yet
# available in /usr/bin when Python is built. Also, the bytecompilation fails
# on files that test invalid syntax.
%undefine __brp_python_bytecompile
# The above is broken now
# https://bugzilla.redhat.com/show_bug.cgi?id=1597664
# This is an older non-standard way to disable the brp script, as a workaround
%undefine py_auto_byte_compile

# We need to get a newer configure generated out of configure.in for the following
# patches:
#   patch 4 (CFLAGS)
#   patch 52 (valgrind)
#   patch 55 (systemtap)
#   patch 145 (linux2)
#
# For patch 55 (systemtap), we need to get a new header for configure to use
#
# configure.in requires autoconf-2.65, but the version in Fedora is currently
# autoconf-2.66
#
# For now, we'll generate a patch to the generated configure script and
# pyconfig.h.in on a machine that has a local copy of autoconf 2.65
#
# Instructions on obtaining such a copy can be seen at
#   http://bugs.python.org/issue7997
#
# To make it easy to regenerate the patch, this specfile can be run in two
# ways:
# (i) regenerate_autotooling_patch  0 : the normal approach: prep the
# source tree using a pre-generated patch to the "configure" script, and do a
# full build
# (ii) regenerate_autotooling_patch 1 : intended to be run on a developer's
# workstation: prep the source tree without patching configure, then rerun a
# local copy of autoconf-2.65, regenerate the patch, then exit, without doing
# the rest of the build
%global regenerate_autotooling_patch 0


# ==================
# Top-level metadata
# ==================
Summary: An interpreted, interactive, object-oriented programming language
Name: %{python}
# Remember to also rebase python2-docs when changing this:
Version: 2.7.17
Release: 1%{?dist}
License: Python
Group: Development/Languages
Requires: %{python}-libs%{?_isa} = %{version}-%{release}
Requires: %{python}-for-tests%{?_isa} = %{version}-%{release}
Provides: python(abi) = %{pybasever}


# =======================
# Build-time requirements
# =======================

# (keep this list alphabetized)

BuildRequires: autoconf
%if ! 0%{?_module_build}
BuildRequires: bluez-libs-devel
%endif
BuildRequires: bzip2
BuildRequires: bzip2-devel
BuildRequires: glibc-devel
BuildRequires: gmp-devel
BuildRequires: libdb-devel
BuildRequires: libffi-devel
BuildRequires: ncurses-devel
BuildRequires: openssl-devel
BuildRequires: pkgconfig
BuildRequires: readline-devel
BuildRequires: sqlite-devel
%if %{with tk_and_tools}
BuildRequires: tcl-devel
%endif

# For the nis module
BuildRequires: libnsl2-devel
BuildRequires: libtirpc-devel

# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME.  We use
# it (in pyexpat) in order to enable the fix in Python-2.7.3 for CVE-2012-0876:
BuildRequires: expat-devel >= 2.1.0

BuildRequires: findutils
BuildRequires: gcc-c++
%if %{with_gdbm}
# ABI change without soname bump, reverted
BuildRequires: gdbm-devel >= 1:1.13
%endif
%if %{with tk_and_tools}
BuildRequires: libGL-devel
BuildRequires: libX11-devel
%endif #{with tk_and_tools}

%if 0%{?with_systemtap}
BuildRequires: systemtap-sdt-devel
# (this introduces a circular dependency, in that systemtap-sdt-devel's
# /usr/bin/dtrace is a python script)
%global tapsetdir      /usr/share/systemtap/tapset
%endif # with_systemtap

BuildRequires: tar
%if %{with tk_and_tools}
BuildRequires: tix-devel
BuildRequires: tk-devel
%endif #{with tk_and_tools}

%if 0%{?with_valgrind}
BuildRequires: valgrind-devel
%endif

BuildRequires: zlib-devel

%if %{with rewheel}
BuildRequires: python2-setuptools
Requires: python2-setuptools

%if ! 0%{?_module_build}
BuildRequires: python2-pip
Requires: python2-pip
%endif # !module_build
%endif # rewheel



# =======================
# Source code and patches
# =======================

# The upstream tarball includes questionable executable files for Windows,
# which we should not ship even in the SRPM.
# Run the "get-source.sh" with the version as argument to download the upstream
# tarball and generate a version with the .exe files removed. For example:
# $ ./get-source.sh 2.7.15

Source: Python-%{version}-noexe.tar.xz

# A script to remove .exe files from the source distribution
Source1: get-source.sh

# Work around bug 562906 until it's fixed in rpm-build by providing a fixed
# version of pythondeps.sh:
Source2: pythondeps.sh
%global __python_requires %{SOURCE2}

# Systemtap tapset to make it easier to use the systemtap static probes
# (actually a template; LIBRARY_PATH will get fixed up during install)
# Written by dmalcolm; not yet sent upstream
Source3: libpython.stp


# Example systemtap script using the tapset
# Written by wcohen, mjw, dmalcolm; not yet sent upstream
Source4: systemtap-example.stp

# Another example systemtap script that uses the tapset
# Written by dmalcolm; not yet sent upstream
Source5: pyfuntop.stp

Source7: pynche

# Modules/Setup.dist is ultimately used by the "makesetup" script to construct
# the Makefile and config.c
#
# Upstream leaves many things disabled by default, to try to make it easy as
# possible to build the code on as many platforms as possible.
#
# TODO: many modules can also now be built by setup.py after the python binary
# has been built; need to assess if we should instead build things there
#
# We patch it downstream as follows:
#   - various modules are built by default by upstream as static libraries;
#   we built them as shared libraries
#   - build the "readline" module (appears to also be handled by setup.py now)
#   - build the nis module (which needs the tirpc library since glibc 2.26)
#   - enable the build of the following modules:
#     - array arraymodule.c	# array objects
#     - cmath cmathmodule.c # -lm # complex math library functions
#     - math mathmodule.c # -lm # math library functions, e.g. sin()
#     - _struct _struct.c	# binary structure packing/unpacking
#     - time timemodule.c # -lm # time operations and variables
#     - operator operator.c	# operator.add() and similar goodies
#     - _weakref _weakref.c	# basic weak reference support
#     - _testcapi _testcapimodule.c    # Python C API test module
#     - _random _randommodule.c	# Random number generator
#     - _collections _collectionsmodule.c # Container types
#     - itertools itertoolsmodule.c
#     - strop stropmodule.c
#     - _functools _functoolsmodule.c
#     - _bisect _bisectmodule.c	# Bisection algorithms
#     - unicodedata unicodedata.c    # static Unicode character database
#     - _locale _localemodule.c
#     - fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
#     - spwd spwdmodule.c		# spwd(3)
#     - grp grpmodule.c		# grp(3)
#     - select selectmodule.c	# select(2); not on ancient System V
#     - mmap mmapmodule.c  # Memory-mapped files
#     - _csv _csv.c  # CSV file helper
#     - _socket socketmodule.c  # Socket module helper for socket(2)
#     - _ssl _ssl.c
#     - crypt cryptmodule.c -lcrypt	# crypt(3)
#     - termios termios.c	# Steen Lumholt's termios module
#     - resource resource.c	# Jeremy Hylton's rlimit interface
#     - audioop audioop.c	# Operations on audio samples
#     - imageop imageop.c	# Operations on images
#     - _md5 md5module.c md5.c
#     - _sha shamodule.c
#     - _sha256 sha256module.c
#     - _sha512 sha512module.c
#     - linuxaudiodev linuxaudiodev.c
#     - timing timingmodule.c
#     - _tkinter _tkinter.c tkappinit.c
#     - dl dlmodule.c
#     - gdbm gdbmmodule.c
#     - _bsddb _bsddb.c
#     - binascii binascii.c
#     - parser parsermodule.c
#     - cStringIO cStringIO.c
#     - cPickle cPickle.c
#     - zlib zlibmodule.c
#     - _multibytecodec cjkcodecs/multibytecodec.c
#     - _codecs_cn cjkcodecs/_codecs_cn.c
#     - _codecs_hk cjkcodecs/_codecs_hk.c
#     - _codecs_iso2022 cjkcodecs/_codecs_iso2022.c
#     - _codecs_jp cjkcodecs/_codecs_jp.c
#     - _codecs_kr cjkcodecs/_codecs_kr.c
#     - _codecs_tw cjkcodecs/_codecs_tw.c
Patch0: python-2.7.1-config.patch

# Removes the "-g" option from "pydoc", for some reason; I believe
# (dmalcolm 2010-01-29) that this was introduced in this change:
# - fix pydoc (#68082)
# in 2.2.1-12 as a response to the -g option needing TkInter installed
# (Red Hat Linux 8)
# Not upstream
Patch1: 00001-pydocnogui.patch

# Add $(CFLAGS) to the linker arguments when linking the "python" binary
# since some architectures (sparc64) need this (rhbz:199373).
# Not yet filed upstream
Patch4: python-2.5-cflags.patch

# Work around a bug in Python' gettext module relating to the "Plural-Forms"
# header (rhbz:252136)
# Related to upstream issues:
#   http://bugs.python.org/issue1448060 and http://bugs.python.org/issue1475523
# though the proposed upstream patches are, alas, different
Patch6: python-2.5.1-plural-fix.patch

# This patch was listed in the changelog as:
#  * Fri Sep 14 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-11
#  - fix encoding of sqlite .py files to work around weird encoding problem
#  in Turkish (#283331)
# A traceback attached to rhbz 244016 shows the problem most clearly: a
# traceback on attempting to import the sqlite module, with:
#   "SyntaxError: encoding problem: with BOM (__init__.py, line 1)"
# This seems to come from Parser/tokenizer.c:check_coding_spec
# Our patch changes two source files within sqlite3, removing the
# "coding: ISO-8859-1" specs and character E4 = U+00E4 =
# LATIN SMALL LETTER A WITH DIAERESIS from in ghaering's surname.
#
# It may be that the conversion of "ISO-8859-1" to "iso-8859-1" is thwarted
# by the implementation of "tolower" in the Turkish locale; see:
#   https://bugzilla.redhat.com/show_bug.cgi?id=191096#c9
#
# TODO: Not yet sent upstream, and appears to me (dmalcolm 2010-01-29) that
# it may be papering over a symptom
Patch7: python-2.5.1-sqlite-encoding.patch

# FIXME: Lib/ctypes/util.py posix implementation defines a function
# _get_soname(f).  Upstreams's implementation of this uses objdump to read the
# SONAME from a library; we avoid this, apparently to minimize space
# requirements on the live CD:
# (rhbz:307221)
Patch10: 00010-2.7.13-binutils-no-dep.patch

# Upstream as of Python 2.7.3:
#  Patch11: python-2.7rc1-codec-ascii-tolower.patch

# Add various constants to the socketmodule (rhbz#436560):
# TODO: these patches were added in 2.5.1-22 and 2.5.1-24 but appear not to
# have been sent upstream yet:
Patch13: python-2.7rc1-socketmodule-constants.patch
Patch14: python-2.7rc1-socketmodule-constants2.patch

# Remove an "-rpath $(LIBDIR)" argument from the linkage args in configure.in:
# FIXME: is this for OSF, not Linux?
Patch16: python-2.6-rpath.patch

# Fixup distutils/unixccompiler.py to remove standard library path from rpath:
# Adapted from Patch0 in ivazquez' python3000 specfile, removing usage of
# super() as it's an old-style class
Patch17: python-2.6.4-distutils-rpath.patch

# 00055 #
# Systemtap support: add statically-defined probe points
# Patch based on upstream bug: http://bugs.python.org/issue4111
# fixed up by mjw and wcohen for 2.6.2, then fixed up by dmalcolm for 2.6.4
# then rewritten by mjw (attachment 390110 of rhbz 545179), then reformatted
# for 2.7rc1 by dmalcolm:
Patch55: 00055-systemtap.patch

# Only used when "%%{_lib}" == "lib64"
# Fixup various paths throughout the build and in distutils from "lib" to "lib64",
# and add the /usr/lib64/pythonMAJOR.MINOR/site-packages to sitedirs, in front of
# /usr/lib/pythonMAJOR.MINOR/site-packages
# Not upstream
Patch102: 00102-2.7.13-lib64.patch

# Python 2.7 split out much of the path-handling from distutils/sysconfig.py to
# a new sysconfig.py (in r77704).
# We need to make equivalent changes to that new file to ensure that the stdlib
# and platform-specific code go to /usr/lib64 not /usr/lib, on 64-bit archs:
Patch103: python-2.7-lib64-sysconfig.patch

# 00104 #
# Only used when "%%{_lib}" == "lib64"
# Another lib64 fix, for distutils/tests/test_install.py; not upstream:
Patch104: 00104-lib64-fix-for-test_install.patch

# 00111 #
# Patch the Makefile.pre.in so that the generated Makefile doesn't try to build
# a libpythonMAJOR.MINOR.a (bug 550692):
# Downstream only: not appropriate for upstream
Patch111: 00111-no-static-lib.patch

# 00112 #
# Patch to support building both optimized vs debug stacks DSO ABIs, sharing
# the same .py and .pyc files, using "_d.so" to signify a debug build of an
# extension module.
#
# Based on Debian's patch for the same,
#  http://patch-tracker.debian.org/patch/series/view/python2.6/2.6.5-2/debug-build.dpatch
#
# (which was itself based on the upstream Windows build), but with some
# changes:
#
#   * Debian's patch to dynload_shlib.c looks for module_d.so, then module.so,
# but this can potentially find a module built against the wrong DSO ABI.  We
# instead search for just module_d.so in a debug build
#
#   * We remove this change from configure.in's build of the Makefile:
#   SO=$DEBUG_EXT.so
# so that sysconfig.py:customize_compiler stays with shared_lib_extension='.so'
# on debug builds, so that UnixCCompiler.find_library_file can find system
# libraries (otherwise "make sharedlibs" fails to find system libraries,
# erroneously looking e.g. for "libffi_d.so" rather than "libffi.so")
#
#   * We change Lib/distutils/command/build_ext.py:build_ext.get_ext_filename
# to add the _d there, when building an extension.  This way, "make sharedlibs"
# can build ctypes, by finding the sysmtem libffi.so (rather than failing to
# find "libffi_d.so"), and builds the module as _ctypes_d.so
#
#   * Similarly, update build_ext:get_libraries handling of Py_ENABLE_SHARED by
# appending "_d" to the python library's name for the debug configuration
#
#   * We modify Modules/makesetup to add the "_d" to the generated Makefile
# rules for the various Modules/*.so targets
#
# This may introduce issues when building an extension that links directly
# against another extension (e.g. users of NumPy?), but seems more robust when
# searching for external libraries
#
#   * We don't change Lib/distutils/command/build.py: build.build_purelib to
# embed plat_specifier, leaving it as is, as pure python builds should be
# unaffected by these differences (we'll be sharing the .py and .pyc files)
#
#   * We introduce DEBUG_SUFFIX as well as DEBUG_EXT:
#     - DEBUG_EXT is used by ELF files (names and SONAMEs); it will be "_d" for
# a debug build
#     - DEBUG_SUFFIX is used by filesystem paths; it will be "-debug" for a
# debug build
#
#   Both will be empty in an optimized build.  "_d" contains characters that
# are valid ELF metadata, but this leads to various ugly filesystem paths (such
# as the include path), and DEBUG_SUFFIX allows these paths to have more natural
# names.  Changing this requires changes elsewhere in the distutils code.
#
#   * We add DEBUG_SUFFIX to PYTHON in the Makefile, so that the two
# configurations build parallel-installable binaries with different names
# ("python-debug" vs "python").
#
#   * Similarly, we add DEBUG_SUFFIX within python-config and
#  python$(VERSION)-config, so that the two configuration get different paths
#  for these.
#
#  See also patch 130 below
#
Patch112: 00112-2.7.13-debug-build.patch


# 00113 #
# Add configure-time support for the COUNT_ALLOCS and CALL_PROFILE options
# described at http://svn.python.org/projects/python/trunk/Misc/SpecialBuilds.txt
# so that if they are enabled, they will be in that build's pyconfig.h, so that
# extension modules will reliably use them
# Not yet sent upstream
Patch113: 00113-more-configuration-flags.patch

# 00114 #
# Add flags for statvfs.f_flag to the constant list in posixmodule (i.e. "os")
# (rhbz:553020); partially upstream as http://bugs.python.org/issue7647
# Not yet sent upstream
Patch114: 00114-statvfs-f_flag-constants.patch

# Upstream r79310 removed the "Modules" directory from sys.path when Python is
# running from the build directory on POSIX to fix a unit test (issue #8205).
# This seems to have broken the compileall.py done in "make install": it cannot
# find shared library extension modules at this point in the build (sys.path
# does not contain DESTDIR/usr/lib(64)/python-2.7/lib-dynload for some reason),
# leading to the build failing with:
# Traceback (most recent call last):
#   File "/home/david/rpmbuild/BUILDROOT/python-2.7-0.1.rc2.fc14.x86_64/usr/lib64/python2.7/compileall.py", line 17, in <module>
#     import struct
#   File "/home/david/rpmbuild/BUILDROOT/python-2.7-0.1.rc2.fc14.x86_64/usr/lib64/python2.7/struct.py", line 1, in <module>
#    from _struct import *
# ImportError: No module named _struct
# This patch adds the build Modules directory to build path.
Patch121: 00121-add-Modules-to-build-path.patch

# 2.7.1 (in r84230) added a test to test_abc which fails if python is
# configured with COUNT_ALLOCS, which is the case for our debug build
# (the COUNT_ALLOCS instrumentation keeps "C" alive).
# Not yet sent upstream
Patch128: python-2.7.1-fix_test_abc_with_COUNT_ALLOCS.patch

# 00130 #
# Add "--extension-suffix" option to python-config and python-debug-config
# (rhbz#732808)
#
# This is adapted from 3.2's PEP-3149 support.
#
# Fedora's debug build has some non-standard features (see also patch 112
# above), though largely shared with Debian/Ubuntu and Windows
#
# In particular, SO in the Makefile is currently always just ".so" for our
# python 2 optimized builds, but for python 2 debug it should be '_d.so', to
# distinguish the debug vs optimized ABI, following the pattern in the above
# patch.
#
# Not yet sent upstream
Patch130: python-2.7.2-add-extension-suffix-to-python-config.patch

# 00131 #
# The four tests in test_io built on top of check_interrupted_write_retry
# fail when built in Koji, for ppc and ppc64; for some reason, the SIGALRM
# handlers are never called, and the call to write runs to completion
# (rhbz#732998)
Patch131: 00131-disable-tests-in-test_io.patch

# 00132 #
# Add non-standard hooks to unittest for use in the "check" phase below, when
# running selftests within the build:
#   @unittest._skipInRpmBuild(reason)
# for tests that hang or fail intermittently within the build environment, and:
#   @unittest._expectedFailureInRpmBuild
# for tests that always fail within the build environment
#
# The hooks only take effect if WITHIN_PYTHON_RPM_BUILD is set in the
# environment, which we set manually in the appropriate portion of the "check"
# phase below (and which potentially other python-* rpms could set, to reuse
# these unittest hooks in their own "check" phases)
Patch132: 00132-add-rpmbuild-hooks-to-unittest.patch

# 00133 #
# "dl" is deprecated, and test_dl doesn't work on 64-bit builds:
Patch133: 00133-skip-test_dl.patch

# 00136 #
# Some tests try to seek on sys.stdin, but don't work as expected when run
# within Koji/mock; skip them within the rpm build:
Patch136: 00136-skip-tests-of-seeking-stdin-in-rpmbuild.patch

# 00137 #
# Some tests within distutils fail when run in an rpmbuild:
Patch137: 00137-skip-distutils-tests-that-fail-in-rpmbuild.patch

# 00138 #
# Fixup some tests within distutils to work with how debug builds are set up:
Patch138: 00138-fix-distutils-tests-in-debug-build.patch

# 00139 #
# ARM-specific: skip known failure in test_float:
#  http://bugs.python.org/issue8265 (rhbz#706253)
Patch139: 00139-skip-test_float-known-failure-on-arm.patch

# 00140 #
# Sparc-specific: skip known failure in test_ctypes:
#  http://bugs.python.org/issue8314 (rhbz#711584)
# which appears to be a libffi bug
Patch140: 00140-skip-test_ctypes-known-failure-on-sparc.patch

# 00142 #
# Some pty tests fail when run in mock (rhbz#714627):
Patch142: 00142-skip-failing-pty-tests-in-rpmbuild.patch

# 00143 #
# Fix the --with-tsc option on ppc64, and rework it on 32-bit ppc to avoid
# aliasing violations (rhbz#698726)
# Sent upstream as http://bugs.python.org/issue12872
Patch143: 00143-tsc-on-ppc.patch

# 00144 #
# (Optionally) disable the gdbm module:
Patch144: 00144-no-gdbm.patch

# 00146 #
# Support OpenSSL FIPS mode (e.g. when OPENSSL_FORCE_FIPS_MODE=1 is set)
# - handle failures from OpenSSL (e.g. on attempts to use MD5 in a
#   FIPS-enforcing environment)
# - add a new "usedforsecurity" keyword argument to the various digest
#   algorithms in hashlib so that you can whitelist a callsite with
#   "usedforsecurity=False"
# (sent upstream for python 3 as http://bugs.python.org/issue9216; this is a
# backport to python 2.7; see RHEL6 patch 119)
# - enforce usage of the _hashlib implementation: don't fall back to the _md5
#   and _sha* modules (leading to clearer error messages if fips selftests
#   fail)
# - don't build the _md5 and _sha* modules; rely on the _hashlib implementation
#   of hashlib (for example, md5.py will use _hashlib's implementation of MD5,
#   if permitted by the FIPS setting)
# (rhbz#563986)
Patch146: 00146-hashlib-fips.patch

# 00147 #
# Add a sys._debugmallocstats() function
# Based on patch 202 from RHEL 5's python.spec, with updates from rhbz#737198
# Sent upstream as http://bugs.python.org/issue14785
Patch147: 00147-add-debug-malloc-stats.patch

# 00155 #
# Avoid allocating thunks in ctypes unless absolutely necessary, to avoid
# generating SELinux denials on "import ctypes" and "import uuid" when
# embedding Python within httpd (rhbz#814391)
Patch155: 00155-avoid-ctypes-thunks.patch

# 00156 #
# Recent builds of gdb will only auto-load scripts from certain safe
# locations.  Turn off this protection when running test_gdb in the selftest
# suite to ensure that it can load our -gdb.py script (rhbz#817072):
# Not yet sent upstream
Patch156: 00156-gdb-autoload-safepath.patch

# 00165 #
# Backport to Python 2 from Python 3.3 of improvements to the "crypt" module
# adding precanned ways of salting a password (rhbz#835021)
# Based on r88500 patch to py3k from Python 3.3
# plus 6482dd1c11ed, 0586c699d467, 62994662676a, 74a1110a3b50, plus edits
# to docstrings to note that this additional functionality is not standard
# within 2.7
Patch165: 00165-crypt-module-salt-backport.patch

# 00167 #
# Don't run any of the stack navigation tests in test_gdb when Python is
# optimized, since there appear to be many different ways in which gdb can
# fail to read the PyFrameObject* for arbitrary places in the callstack,
# presumably due to compiler optimization (rhbz#912025)
#
# Not yet sent upstream
Patch167: 00167-disable-stack-navigation-tests-when-optimized-in-test_gdb.patch

# 00169 #
# Use SHA-256 rather than implicitly using MD5 within the challenge handling
# in multiprocessing.connection
#
# Sent upstream as http://bugs.python.org/issue17258
# (rhbz#879695)
Patch169: 00169-avoid-implicit-usage-of-md5-in-multiprocessing.patch

# 00170 #
# In debug builds, try to print repr() when a C-level assert fails in the
# garbage collector (typically indicating a reference-counting error
# somewhere else e.g in an extension module)
# Backported to 2.7 from a patch I sent upstream for py3k
#   http://bugs.python.org/issue9263  (rhbz#614680)
# hiding the proposed new macros/functions within gcmodule.c to avoid exposing
# them within the extension API.
# (rhbz#850013)
Patch170: 00170-gc-assertions.patch

# 00174 #
# Workaround for failure to set up prefix/exec_prefix when running
# an embededed libpython that sets Py_SetProgramName() to a name not
# on $PATH when run from the root directory due to
#   https://fedoraproject.org/wiki/Features/UsrMove
# e.g. cmpi-bindings under systemd (rhbz#817554):
Patch174: 00174-fix-for-usr-move.patch

# 00180 #
# Enable building on ppc64p7
# Not appropriate for upstream, Fedora-specific naming
Patch180: 00180-python-add-support-for-ppc64p7.patch

# 00181 #
# Allow arbitrary timeout for Condition.wait, as reported in
# https://bugzilla.redhat.com/show_bug.cgi?id=917709
# Upstream doesn't want this: http://bugs.python.org/issue17748
# But we have no better solution downstream yet, and since there is
# no API breakage, we apply this patch.
# Doesn't apply to Python 3, where this is fixed otherwise and works.
Patch181: 00181-allow-arbitrary-timeout-in-condition-wait.patch

# 00185 #
# Makes urllib2 honor "no_proxy" enviroment variable for "ftp:" URLs
# when ftp_proxy is set
Patch185: 00185-urllib2-honors-noproxy-for-ftp.patch

# 00187 #
# Add an explicit RPATH to pyexpat.so pointing at the directory
# containing the system expat (which has the extra XML_SetHashSalt
# symbol), to avoid an ImportError with a link error if there's an
# LD_LIBRARY_PATH containing a "vanilla" build of expat (without the
# symbol)
Patch187: 00187-add-RPATH-to-pyexpat.patch

# 00191 #
# Disabling NOOP test as it fails without internet connection
Patch191: 00191-disable-NOOP.patch

# 00193 #
# Enable loading sqlite extensions. This patch isn't needed for
# python3.spec, since Python 3 has a configuration option for this.
# rhbz#1066708
# Patch provided by John C. Peterson
Patch193: 00193-enable-loading-sqlite-extensions.patch

# 00198 #
Patch198: 00198-add-rewheel-module.patch

# 00257 #
# Python's threading library doesn't use the monotonic clock when handling wait timeouts,
# so when the system clock is set backwards, the wait doesn't return after the timeout,
# causing deadlocks.
# This patch works around the issue.
# Resolves: rhbz#1565560
# DOWNSTREAM ONLY PATCH
Patch257: 00257-threading-wait-clamp-remaining-time.patch

# 00288 #
# Adds a warning when /usr/bin/python is invoked during rpmbuild
# See https://fedoraproject.org/wiki/Changes/Avoid_usr_bin_python_in_RPM_Build
Patch288: 00288-disable-python2.patch

# 00289 #
# Disable automatic detection for the nis module
# (we handle it it in Setup.dist, see Patch0)
Patch289: 00289-disable-nis-detection.patch

# (New patches go here ^^^)
#
# When adding new patches to "python2" and "python3" in Fedora, EL, etc.,
# please try to keep the patch numbers in-sync between all specfiles.
#
# More information, and a patch number catalog, is at:
#
#     https://fedoraproject.org/wiki/SIGs/Python/PythonPatches

# This is the generated patch to "configure"; see the description of
#   %%{regenerate_autotooling_patch}
# above:

# Disable tk for modularity builds to break up build dependencies
Patch04000: 04000-modularity-disable-tk.patch

Patch5000: 05000-autotool-intermediates.patch

# ======================================================
# Additional metadata, and subpackages
# ======================================================

# Providing python27 as now multiple interpreters exist in Fedora
# alongside the system one e.g. python26, python33 etc
Provides:   python27 = %{version}-%{release}


URL: https://www.python.org/

%description
Python 2 is an old version of the language that is incompatible with the 3.x
line of releases. The language is mostly the same, but many details, especially
how built-in objects like dictionaries and strings work, have changed
considerably, and a lot of deprecated features have finally been removed in the
3.x line.

Note that documentation for Python 2 is provided in the python2-docs
package.

This package provides the "python2" executable; most of the actual
implementation is within the "python2-libs" package.

%package for-tests
Summary: The python2-for-tests-command
Requires: %{python}-libs%{?_isa} = %{version}-%{release}

%description for-tests
This package provides the "python2-for-tests" executable, a working
Python 2 interpreter intended for use only in test harnesses that
were not ported to Python 3 yet.

Install this package, but not "python2", to approximate a system that
lacks Python 2 entirely.


%package libs
Summary: Runtime libraries for Python 2
Group: Applications/System

# Needed for ctypes, to load libraries, worked around for Live CDs size
# Requires: binutils

# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME.  We use
# this symbol (in pyexpat), so we must explicitly state this dependency to
# prevent "import pyexpat" from failing with a linker error if someone hasn't
# yet upgraded expat:
Requires: expat >= 2.1.0

# Python built with glibc >= 2.24.90-26 needs to require it (rhbz#1410644).
Requires: glibc%{?_isa} >= 2.24.90-26

%if %{with_gdbm}
# ABI change without soname bump, reverted
Requires: gdbm%{?_isa} >= 1:1.13
%endif

Provides: python-libs = %{version}-%{release}
Provides: python-libs%{?_isa} = %{version}-%{release}

%description libs
This package contains files used to embed Python 2 into applications.

%package devel
Summary: Libraries and header files needed for Python 2 development
Group: Development/Libraries
Requires: %{python}%{?_isa} = %{version}-%{release}
Requires: python-rpm-macros
Requires: python2-rpm-macros
Requires: python3-rpm-generators
Requires: pkgconfig

# https://bugzilla.redhat.com/show_bug.cgi?id=1217376
# https://bugzilla.redhat.com/show_bug.cgi?id=1496757
# https://bugzilla.redhat.com/show_bug.cgi?id=1218294
# TODO change to a specific subpackage once available (#1218294)
Requires: redhat-rpm-config

# Needed here because of the migration of Makefile from -devel to the main
# package
Conflicts: %{python} < %{version}-%{release}

Provides: python-devel = %{version}-%{release}
Provides: python-devel%{?_isa} = %{version}-%{release}

%description devel
This package contains libraries and header files used to build applications
with and native libraries for Python 2

%if %{with tk_and_tools}
%package tools
Summary: A collection of development tools included with Python 2
Group: Development/Tools
Requires: %{name} = %{version}-%{release}
Requires: %{python}-tkinter = %{version}-%{release}

Provides: python-tools = %{version}-%{release}
Provides: python-tools%{?_isa} = %{version}-%{release}

%description tools
This package includes several tools to help with the development of Python 2
programs, including IDLE (an IDE with editing and debugging facilities), a
color editor (pynche), and a python gettext program (pygettext.py).

%package tkinter
Summary: A graphical user interface for the Python 2 scripting language
Group: Development/Languages
Requires: %{name} = %{version}-%{release}

Provides: tkinter = %{version}-%{release}
Provides: tkinter%{?_isa} = %{version}-%{release}
Provides: tkinter2 = %{version}-%{release}
Provides: tkinter2%{?_isa} = %{version}-%{release}
Provides: python-tkinter = %{version}-%{release}
Provides: python-tkinter%{?_isa} = %{version}-%{release}

%description tkinter

The Tkinter (Tk interface) program is an graphical user interface for
the Python 2 scripting language.

You should install the python2tkinter package if you'd like to use a graphical
user interface for Python 2 programming.
%endif %{with tk_and_tools}

%package test
Summary: The test modules from the main python2 package
Group: Development/Languages
Requires: %{name} = %{version}-%{release}

Provides: python-test = %{version}-%{release}
Provides: python-test%{?_isa} = %{version}-%{release}

%description test

The test modules from the main python2 package: %{name}
These have been removed to save space, as they are never or almost
never used in production.

You might want to install the python2-test package if you're developing python 2
code that uses more than just unittest and/or test.support.

%if %{with debug_build}
%package debug
Summary: Debug version of the Python 2 runtime
Group: Applications/System

# The debug build is an all-in-one package version of the regular build, and
# shares the same .py/.pyc files and directories as the regular build.  Hence
# we depend on all of the subpackages of the regular build:
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: %{name}-libs%{?_isa} = %{version}-%{release}
Requires: %{name}-devel%{?_isa} = %{version}-%{release}
Requires: %{name}-test%{?_isa} = %{version}-%{release}
%if %{with tk_and_tools}
Requires: %{python}-tkinter%{?_isa} = %{version}-%{release}
Requires: %{name}-tools%{?_isa} = %{version}-%{release}
%endif #{with tk_and_tools}

Provides: python-debug = %{version}-%{release}
Provides: python-debug%{?_isa} = %{version}-%{release}

%description debug
python2-debug provides a version of the Python 2 runtime with numerous debugging
features enabled, aimed at advanced Python users, such as developers of Python
extension modules.

This version uses more memory and will be slower than the regular Python 2 build,
but is useful for tracking down reference-counting issues, and other bugs.

The bytecodes are unchanged, so that .pyc files are compatible between the two
version of Python 2, but the debugging features mean that C/C++ extension modules
are ABI-incompatible with those built for the standard runtime.

It shares installation directories with the standard Python 2 runtime, so that
.py and .pyc files can be shared.  All compiled extension modules gain a "_d"
suffix ("foo_d.so" rather than "foo.so") so that each Python 2 implementation can
load its own extensions.
%endif # with debug_build


# ======================================================
# The prep phase of the build:
# ======================================================

%prep
%setup -q -n Python-%{version}

%if 0%{?with_systemtap}
# Provide an example of usage of the tapset:
cp -a %{SOURCE4} .
cp -a %{SOURCE5} .
%endif # with_systemtap

# Ensure that we're using the system copy of various libraries, rather than
# copies shipped by upstream in the tarball:
#   Remove embedded copy of expat:
rm -r Modules/expat || exit 1

#   Remove embedded copy of libffi:
for SUBDIR in darwin libffi libffi_arm_wince libffi_msvc libffi_osx ; do
  rm -r Modules/_ctypes/$SUBDIR || exit 1 ;
done

#   Remove embedded copy of zlib:
rm -r Modules/zlib || exit 1

## Disabling hashlib patch for now as it needs to be reimplemented
## for OpenSSL 1.1.0.
# Don't build upstream Python's implementation of these crypto algorithms;
# instead rely on _hashlib and OpenSSL.
#
# For example, in our builds md5.py uses always uses hashlib.md5 (rather than
# falling back to _md5 when hashlib.md5 is not available); hashlib.md5 is
# implemented within _hashlib via OpenSSL (and thus respects FIPS mode)
#for f in md5module.c md5.c shamodule.c sha256module.c sha512module.c; do
#    rm Modules/$f
#done

#
# Apply patches:
#
%patch0 -p1 -b .rhconfig
%patch1 -p1 -b .no_gui
%patch4 -p1 -b .cflags
%patch6 -p1 -b .plural
%patch7 -p1

%if "%{_lib}" == "lib64"
%patch102 -p1 -b .lib64
%patch103 -p1 -b .lib64-sysconfig
%patch104 -p1
%endif

%patch10 -p1 -b .binutils-no-dep
%patch13 -p1 -b .socketmodule
%patch14 -p1 -b .socketmodule2
%patch16 -p1 -b .rpath
%patch17 -p1 -b .distutils-rpath

%if 0%{?with_systemtap}
%patch55 -p1 -b .systemtap
%endif

%patch111 -p1 -b .no-static-lib

%patch112 -p1 -b .debug-build

%patch113 -p1 -b .more-configuration-flags

%patch114 -p1 -b .statvfs-f-flag-constants


%patch121 -p1
%patch128 -p1

%patch130 -p1

%ifarch ppc %{power64}
%patch131 -p1
%endif

%patch132 -p1
%patch133 -p1
%patch136 -p1 -b .stdin-test
%patch137 -p1
%patch138 -p1
%ifarch %{arm}
%patch139 -p1
%endif
%ifarch %{sparc}
%patch140 -p1
%endif
%patch142 -p1 -b .tty-fail
%patch143 -p1 -b .tsc-on-ppc
%if !%{with_gdbm}
%patch144 -p1
%endif
#patch146 -p1
%patch147 -p1
%patch155 -p1
%patch156 -p1
%patch165 -p1
mv Modules/cryptmodule.c Modules/_cryptmodule.c
%patch167 -p1
%patch169 -p1
%patch170 -p1
%patch174 -p1 -b .fix-for-usr-move
%patch180 -p1
%patch181 -p1
%patch185 -p1
%patch187 -p1
%patch191 -p1
%patch193 -p1
%if %{with rewheel}
%patch198 -p1
%endif
%patch257 -p1
%patch288 -p1
%patch289 -p1

%if ! %{with tk_and_tools}
%patch4000 -p1
%endif

# This shouldn't be necesarry, but is right now (2.2a3)
find -name "*~" |xargs rm -f

%if ! 0%{regenerate_autotooling_patch}
# Normally we apply the patch to "configure"
# We don't apply the patch if we're working towards regenerating it
%patch5000 -p0 -b .autotool-intermediates
%endif


# ======================================================
# Configuring and building the code:
# ======================================================

%build
export RHEL_ALLOW_PYTHON2_FOR_BUILD=1
topdir=$(pwd)
export CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
export CXXFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
export CPPFLAGS="$(pkg-config --cflags-only-I libffi)"
export OPT="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
export LINKCC="gcc"
export LDFLAGS="$RPM_LD_FLAGS"
if pkg-config openssl ; then
  export CFLAGS="$CFLAGS $(pkg-config --cflags openssl)"
  export LDFLAGS="$LDFLAGS $(pkg-config --libs-only-L openssl)"
fi
# Force CC
export CC=gcc

%if 0%{regenerate_autotooling_patch}
# If enabled, this code regenerates the patch to "configure", using a
# local copy of autoconf-2.65, then exits the build
#
# The following assumes that the copy is installed to ~/autoconf-2.65/bin
# as per these instructions:
#   http://bugs.python.org/issue7997

for f in pyconfig.h.in configure ; do
    cp $f $f.autotool-intermediates ;
done

# Rerun the autotools:
PATH=~/autoconf-2.65/bin:$PATH autoconf
autoheader

# Regenerate the patch:
gendiff . .autotool-intermediates > %{PATCH5000}


# Exit the build
exit 1
%endif

# Define a function, for how to perform a "build" of python for a given
# configuration:
BuildPython() {
  ConfName=$1
  BinaryName=$2
  SymlinkName=$3
  ExtraConfigArgs=$4
  PathFixWithThisBinary=$5

  ConfDir=build/$ConfName

  echo STARTING: BUILD OF PYTHON FOR CONFIGURATION: $ConfName - %{_bindir}/$BinaryName
  mkdir -p $ConfDir

  pushd $ConfDir

  # Use the freshly created "configure" script, but in the directory two above:
  %global _configure $topdir/configure

%configure \
  --enable-ipv6 \
  --enable-shared \
  --enable-unicode=%{unicode} \
  --with-dbmliborder=gdbm:ndbm:bdb \
  --with-system-expat \
  --with-system-ffi \
%if 0%{?with_systemtap}
  --with-dtrace \
  --with-tapset-install-dir=%{tapsetdir} \
%endif
%if 0%{?with_valgrind}
  --with-valgrind \
%endif
  $ExtraConfigArgs \
  %{nil}

make EXTRA_CFLAGS="$CFLAGS" %{?_smp_mflags}

# We need to fix shebang lines across the full source tree.
#
# We do this using the pathfix.py script, which requires one of the
# freshly-built Python binaries.
#
# We use the optimized python binary, and make the shebangs point at that same
# optimized python binary:
if $PathFixWithThisBinary
then
  # pathfix.py currently only works with files matching ^[a-zA-Z0-9_]+\.py$
  # when crawling through directories, so we handle the special cases manually
  LD_LIBRARY_PATH="$topdir/$ConfDir" ./$BinaryName \
    $topdir/Tools/scripts/pathfix.py \
      -i "%{_bindir}/python%{pybasever}" \
      $topdir \
      $topdir/Tools/pynche/pynche \
      $topdir/Demo/pdist/{rcvs,rcsbump,rrcs} \
      $topdir/Demo/scripts/find-uname.py \
      $topdir/Tools/scripts/reindent-rst.py
fi

# Rebuild with new python
# We need a link to a versioned python in the build directory
ln -s $BinaryName $SymlinkName
LD_LIBRARY_PATH="$topdir/$ConfDir" PATH=$PATH:$topdir/$ConfDir make -s EXTRA_CFLAGS="$CFLAGS" %{?_smp_mflags}

  popd
  echo FINISHED: BUILD OF PYTHON FOR CONFIGURATION: $ConfDir
}

# Use "BuildPython" to support building with different configurations:

%if %{with debug_build}
BuildPython debug \
  python-debug \
  python%{pybasever}-debug \
%ifarch %{ix86} x86_64 ppc %{power64}
  "--with-pydebug --with-tsc --with-count-allocs --with-call-profile" \
%else
  "--with-pydebug --with-count-allocs --with-call-profile" \
%endif
  false
%endif # with debug_build

BuildPython optimized \
  python \
  python%{pybasever} \
%ifarch %{ix86} x86_64
  "" \
%else
  "" \
%endif
  true


# ======================================================
# Installing the built code:
# ======================================================

%install
export RHEL_ALLOW_PYTHON2_FOR_BUILD=1
topdir=$(pwd)
rm -rf %{buildroot}
mkdir -p %{buildroot}%{_prefix} %{buildroot}%{_mandir}

# Clean up patched .py files that are saved as .lib64
for f in distutils/command/install distutils/sysconfig; do
    rm -f Lib/$f.py.lib64
done

InstallPython() {

  ConfName=$1
  BinaryName=$2
  PyInstSoName=$3

  ConfDir=build/$ConfName

  echo STARTING: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName - %{_bindir}/$BinaryName
  mkdir -p $ConfDir

  pushd $ConfDir

make install DESTDIR=%{buildroot}

# We install a collection of hooks for gdb that make it easier to debug
# executables linked against libpython (such as /usr/lib/python itself)
#
# These hooks are implemented in Python itself
#
# gdb-archer looks for them in the same path as the ELF file, with a -gdb.py suffix.
# We put them in the debuginfo package by installing them to e.g.:
#  /usr/lib/debug/usr/lib/libpython2.6.so.1.0.debug-gdb.py
# (note that the debug path is /usr/lib/debug for both 32/64 bit)
#
# See https://fedoraproject.org/wiki/Features/EasierPythonDebugging for more
# information
#
# Initially I tried:
#  /usr/lib/libpython2.6.so.1.0-gdb.py
# but doing so generated noise when ldconfig was rerun (rhbz:562980)
#
%if 0%{?with_gdb_hooks}
DirHoldingGdbPy=%{_prefix}/lib/debug/%{_libdir}
PathOfGdbPy=$DirHoldingGdbPy/$PyInstSoName.debug-gdb.py

mkdir -p %{buildroot}$DirHoldingGdbPy
cp $topdir/Tools/gdb/libpython.py %{buildroot}$PathOfGdbPy

# Manually byte-compile the file, in case find-debuginfo.sh is run before
# brp-python-bytecompile, so that the .pyc/.pyo files are properly listed in
# the debuginfo manifest:
LD_LIBRARY_PATH="$topdir/$ConfDir" $topdir/$ConfDir/$BinaryName \
  -c "import compileall; import sys; compileall.compile_dir('%{buildroot}$DirHoldingGdbPy', ddir='$DirHoldingGdbPy')"

LD_LIBRARY_PATH="$topdir/$ConfDir" $topdir/$ConfDir/$BinaryName -O \
  -c "import compileall; import sys; compileall.compile_dir('%{buildroot}$DirHoldingGdbPy', ddir='$DirHoldingGdbPy')"
%endif # with_gdb_hooks

  popd

  echo FINISHED: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName
}

# Use "InstallPython" to support building with different configurations:

# Install the "debug" build first, so that we can move some files aside
%if %{with debug_build}
InstallPython debug \
  python%{pybasever}-debug \
  %{py_INSTSONAME_debug}
%endif # with debug_build

# Now the optimized build:
InstallPython optimized \
  python%{pybasever} \
  %{py_INSTSONAME_optimized}


# Fix the interpreter path in binaries installed by distutils
# (which changes them by itself)
# Make sure we preserve the file permissions
for fixed in %{buildroot}%{_bindir}/pydoc; do
    sed 's,#!.*/python$,#!/usr/bin/env python%{pybasever},' $fixed > $fixed- \
        && cat $fixed- > $fixed && rm -f $fixed-
done

# Junk, no point in putting in -test sub-pkg
rm -f %{buildroot}/%{pylibdir}/idlelib/testcode.py*

# don't include tests that are run at build time in the package
# This is documented, and used: rhbz#387401
if /bin/false; then
 # Move this to -test subpackage.
mkdir save_bits_of_test
for i in test_support.py __init__.py; do
  cp -a %{buildroot}/%{pylibdir}/test/$i save_bits_of_test
done
rm -rf %{buildroot}/%{pylibdir}/test
mkdir %{buildroot}/%{pylibdir}/test
cp -a save_bits_of_test/* %{buildroot}/%{pylibdir}/test
fi

# tools

mkdir -p ${RPM_BUILD_ROOT}%{site_packages}

#pynche
install -p -m755 %{SOURCE7} ${RPM_BUILD_ROOT}%{_bindir}/pynche
chmod 755 ${RPM_BUILD_ROOT}%{_bindir}/pynche
rm -f Tools/pynche/*.pyw
cp -rp Tools/pynche \
  ${RPM_BUILD_ROOT}%{site_packages}/

mv Tools/pynche/README Tools/pynche/README.pynche

#gettext
install -m755  Tools/i18n/pygettext.py %{buildroot}%{_bindir}/
install -m755  Tools/i18n/msgfmt.py %{buildroot}%{_bindir}/

# Useful development tools
install -m755 -d %{buildroot}%{tools_dir}/scripts
install Tools/README %{buildroot}%{tools_dir}/
install Tools/scripts/*py %{buildroot}%{tools_dir}/scripts/

# Documentation tools
install -m755 -d %{buildroot}%{doc_tools_dir}
#install -m755 Doc/tools/mkhowto %{buildroot}%{doc_tools_dir}

# Useful demo scripts
install -m755 -d %{buildroot}%{demo_dir}
cp -ar Demo/* %{buildroot}%{demo_dir}

# Get rid of crap
find %{buildroot}/ -name "*~"|xargs rm -f
find %{buildroot}/ -name ".cvsignore"|xargs rm -f
find %{buildroot}/ -name "*.bat"|xargs rm -f
find . -name "*~"|xargs rm -f
find . -name ".cvsignore"|xargs rm -f
#zero length
rm -f %{buildroot}%{pylibdir}/LICENSE.txt


# Provide binaries in the form of bin2 and bin2.7, thus implementing
# (and expanding) the recommendations of PEP 394.
mv %{buildroot}%{_bindir}/idle %{buildroot}%{_bindir}/idle%{pybasever}
ln -s ./idle%{pybasever} %{buildroot}%{_bindir}/idle2
ln -s ./idle2 %{buildroot}%{_bindir}/idle

mv %{buildroot}%{_bindir}/pynche %{buildroot}%{_bindir}/pynche%{pybasever}
ln -s ./pynche%{pybasever} %{buildroot}%{_bindir}/pynche2
ln -s ./pynche2 %{buildroot}%{_bindir}/pynche

mv %{buildroot}%{_bindir}/pydoc %{buildroot}%{_bindir}/pydoc%{pybasever}
ln -s ./pydoc%{pybasever} %{buildroot}%{_bindir}/pydoc2
ln -s ./pydoc2 %{buildroot}%{_bindir}/pydoc

mv %{buildroot}%{_bindir}/pygettext.py %{buildroot}%{_bindir}/pygettext%{pybasever}.py
ln -s ./pygettext%{pybasever}.py %{buildroot}%{_bindir}/pygettext2.py
ln -s ./pygettext2.py %{buildroot}%{_bindir}/pygettext.py

mv %{buildroot}%{_bindir}/msgfmt.py %{buildroot}%{_bindir}/msgfmt%{pybasever}.py
ln -s ./msgfmt%{pybasever}.py %{buildroot}%{_bindir}/msgfmt2.py
ln -s ./msgfmt2.py %{buildroot}%{_bindir}/msgfmt.py

mv %{buildroot}%{_bindir}/smtpd.py %{buildroot}%{_bindir}/smtpd%{pybasever}.py
ln -s ./smtpd%{pybasever}.py %{buildroot}%{_bindir}/smtpd2.py
ln -s ./smtpd2.py %{buildroot}%{_bindir}/smtpd.py

# Fix bug #143667: python should own /usr/lib/python2.x on 64-bit machines
%if "%{_lib}" == "lib64"
install -d %{buildroot}/%{_prefix}/lib/python%{pybasever}/site-packages
%endif

# Make python-devel multilib-ready (bug #192747, #139911)
%global _pyconfig32_h pyconfig-32.h
%global _pyconfig64_h pyconfig-64.h

%ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64 %{mips64} riscv64
%global _pyconfig_h %{_pyconfig64_h}
%else
%global _pyconfig_h %{_pyconfig32_h}
%endif

%if %{with debug_build}
%global PyIncludeDirs python%{pybasever} python%{pybasever}-debug
%else
%global PyIncludeDirs python%{pybasever}
%endif

for PyIncludeDir in %{PyIncludeDirs} ; do
  mv %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h \
     %{buildroot}%{_includedir}/$PyIncludeDir/%{_pyconfig_h}
  cat > %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h << EOF
#include <bits/wordsize.h>

#if __WORDSIZE == 32
#include "%{_pyconfig32_h}"
#elif __WORDSIZE == 64
#include "%{_pyconfig64_h}"
#else
#error "Unknown word size"
#endif
EOF
done
ln -s ../../libpython%{pybasever}.so %{buildroot}%{pylibdir}/config/libpython%{pybasever}.so

# Fix for bug 201434: make sure distutils looks at the right pyconfig.h file
# Similar for sysconfig: sysconfig.get_config_h_filename tries to locate
# pyconfig.h so it can be parsed, and needs to do this at runtime in site.py
# when python starts up.
#
# Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h
# variants:
sed -i -e "s/'pyconfig.h'/'%{_pyconfig_h}'/" \
  %{buildroot}%{pylibdir}/distutils/sysconfig.py \
  %{buildroot}%{pylibdir}/sysconfig.py

# Ensure that the curses module was linked against libncursesw.so, rather than
# libncurses.so (bug 539917)
ldd %{buildroot}/%{dynload_dir}/_curses*.so \
    | grep curses \
    | grep libncurses.so && (echo "_curses.so linked against libncurses.so" ; exit 1)

# Ensure that the debug modules are linked against the debug libpython, and
# likewise for the optimized modules and libpython:
for Module in %{buildroot}/%{dynload_dir}/*.so ; do
    case $Module in
    *_d.so)
        ldd $Module | grep %{py_INSTSONAME_optimized} &&
            (echo Debug module $Module linked against optimized %{py_INSTSONAME_optimized} ; exit 1)

        ;;
    *)
        ldd $Module | grep %{py_INSTSONAME_debug} &&
            (echo Optimized module $Module linked against debug %{py_INSTSONAME_optimized} ; exit 1)
        ;;
    esac
done

#
# Systemtap hooks:
#
%if 0%{?with_systemtap}
# Install a tapset for this libpython into tapsetdir, fixing up the path to the
# library:
mkdir -p %{buildroot}%{tapsetdir}
%ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64 %{mips64}
%global libpython_stp_optimized libpython%{pybasever}-64.stp
%global libpython_stp_debug     libpython%{pybasever}-debug-64.stp
%else
%global libpython_stp_optimized libpython%{pybasever}-32.stp
%global libpython_stp_debug     libpython%{pybasever}-debug-32.stp
%endif

sed \
   -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_optimized}|" \
   %{SOURCE3} \
   > %{buildroot}%{tapsetdir}/%{libpython_stp_optimized}

%if %{with debug_build}
sed \
   -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_debug}|" \
   %{SOURCE3} \
   > %{buildroot}%{tapsetdir}/%{libpython_stp_debug}
%endif # with debug_build
%endif # with_systemtap

# Do bytecompilation with the newly installed interpreter.
# compile *.pyo
find %{buildroot} -type f -a -name "*.py" -print0 | \
    LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
    PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \
    xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2]) for f in sys.argv[1:]]' || :
# compile *.pyc
find %{buildroot} -type f -a -name "*.py" -print0 | \
    LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
    PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \
    xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2]) for f in sys.argv[1:]]' || :


# Make library-files user writable
/usr/bin/chmod 755 %{buildroot}%{dynload_dir}/*.so
/usr/bin/chmod 755 %{buildroot}%{_libdir}/libpython%{pybasever}.so.1.0
%if %{with debug_build}
/usr/bin/chmod 755 %{buildroot}%{_libdir}/libpython%{pybasever}_d.so.1.0
%endif # with debug_build

# Add an executable for tests
cp %{buildroot}%{_bindir}/python%{pybasever} %{buildroot}%{_bindir}/python2-for-tests
# Remove unversioned executables
rm %{buildroot}%{_bindir}/python
rm %{buildroot}%{_bindir}/idle
rm %{buildroot}%{_bindir}/pydoc
rm %{buildroot}%{_bindir}/pynche
rm %{buildroot}%{_bindir}/smtpd.py
rm %{buildroot}%{_bindir}/python-config
# Remove unversioned manpage
rm %{buildroot}%{_mandir}/man1/python.*


# ======================================================
# Running the upstream test suite
# ======================================================

%check
export RHEL_ALLOW_PYTHON2_FOR_BUILD=1
topdir=$(pwd)
CheckPython() {
  ConfName=$1
  BinaryName=$2
  ConfDir=$(pwd)/build/$ConfName

  export OPENSSL_CONF=/non-existing-file

  echo STARTING: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName

  # Note that we're running the tests using the version of the code in the
  # builddir, not in the buildroot.

  pushd $ConfDir

  EXTRATESTOPTS="--verbose"

%ifarch s390 s390x %{power64} %{arm} aarch64 %{mips}
    EXTRATESTOPTS="$EXTRATESTOPTS -x test_gdb"
%endif
%ifarch %{mips64}
    EXTRATESTOPTS="$EXTRATESTOPTS -x test_ctypes"
%endif

%if 0%{?with_huntrleaks}
  # Try to detect reference leaks on debug builds.  By default this means
  # running every test 10 times (6 to stabilize, then 4 to watch):
  if [ "$ConfName" = "debug"  ] ; then
    EXTRATESTOPTS="$EXTRATESTOPTS --huntrleaks : "
  fi
%endif

  # Run the upstream test suite, setting "WITHIN_PYTHON_RPM_BUILD" so that the
  # our non-standard decorators take effect on the relevant tests:
  #   @unittest._skipInRpmBuild(reason)
  #   @unittest._expectedFailureInRpmBuild
  WITHIN_PYTHON_RPM_BUILD= EXTRATESTOPTS="$EXTRATESTOPTS -x test_distutils" make test

  popd

  echo FINISHED: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName

}

%if %{with tests}

# no locale coercion in python2
# test_ssl:test_load_dh_params shutil.copies into unicode filename
export LC_ALL=C.utf-8

# Check each of the configurations:
%if %{with debug_build}
CheckPython \
  debug \
  python%{pybasever}-debug
%endif # with debug_build
CheckPython \
  optimized \
  python%{pybasever}

%endif # with tests


# ======================================================
# Cleaning up
# ======================================================


%files
%defattr(-, root, root, -)
%{!?_licensedir:%global license %%doc}
%license LICENSE
%doc README
%{_bindir}/pydoc*
%{_bindir}/%{python}
%{_bindir}/python%{pybasever}
%{_mandir}/*/*

%files for-tests
%license LICENSE
%{_bindir}/python2-for-tests

%files libs
%defattr(-,root,root,-)
%{!?_licensedir:%global license %%doc}
%license LICENSE
%doc README
%dir %{pylibdir}
%dir %{dynload_dir}

%{dynload_dir}/_md5module.so
%{dynload_dir}/_sha256module.so
%{dynload_dir}/_sha512module.so
%{dynload_dir}/_shamodule.so

%{dynload_dir}/Python-%{version}-py%{pybasever}.egg-info
%{dynload_dir}/_bisectmodule.so
%{dynload_dir}/_bsddb.so
%{dynload_dir}/_codecs_cn.so
%{dynload_dir}/_codecs_hk.so
%{dynload_dir}/_codecs_iso2022.so
%{dynload_dir}/_codecs_jp.so
%{dynload_dir}/_codecs_kr.so
%{dynload_dir}/_codecs_tw.so
%{dynload_dir}/_collectionsmodule.so
%{dynload_dir}/_csv.so
%{dynload_dir}/_ctypes.so
%{dynload_dir}/_curses.so
%{dynload_dir}/_curses_panel.so
%{dynload_dir}/_elementtree.so
%{dynload_dir}/_functoolsmodule.so
%{dynload_dir}/_hashlib.so
%{dynload_dir}/_heapq.so
%{dynload_dir}/_hotshot.so
%{dynload_dir}/_io.so
%{dynload_dir}/_json.so
%{dynload_dir}/_localemodule.so
%{dynload_dir}/_lsprof.so
%{dynload_dir}/_multibytecodecmodule.so
%{dynload_dir}/_multiprocessing.so
%{dynload_dir}/_randommodule.so
%{dynload_dir}/_socketmodule.so
%{dynload_dir}/_sqlite3.so
%{dynload_dir}/_ssl.so
%{dynload_dir}/_struct.so
%{dynload_dir}/arraymodule.so
%{dynload_dir}/audioop.so
%{dynload_dir}/binascii.so
%{dynload_dir}/bz2.so
%{dynload_dir}/cPickle.so
%{dynload_dir}/cStringIO.so
%{dynload_dir}/cmathmodule.so
%{dynload_dir}/_cryptmodule.so
%{dynload_dir}/datetime.so
%{dynload_dir}/dbm.so
%{dynload_dir}/dlmodule.so
%{dynload_dir}/fcntlmodule.so
%{dynload_dir}/future_builtins.so
%if %{with_gdbm}
%{dynload_dir}/gdbmmodule.so
%endif
%{dynload_dir}/grpmodule.so
%{dynload_dir}/imageop.so
%{dynload_dir}/itertoolsmodule.so
%{dynload_dir}/linuxaudiodev.so
%{dynload_dir}/math.so
%{dynload_dir}/mmapmodule.so
%{dynload_dir}/nismodule.so
%{dynload_dir}/operator.so
%{dynload_dir}/ossaudiodev.so
%{dynload_dir}/parsermodule.so
%{dynload_dir}/pyexpat.so
%{dynload_dir}/readline.so
%{dynload_dir}/resource.so
%{dynload_dir}/selectmodule.so
%{dynload_dir}/spwdmodule.so
%{dynload_dir}/stropmodule.so
%{dynload_dir}/syslog.so
%{dynload_dir}/termios.so
%{dynload_dir}/timemodule.so
%{dynload_dir}/timingmodule.so
%{dynload_dir}/unicodedata.so
%{dynload_dir}/xxsubtype.so
%{dynload_dir}/zlibmodule.so

%dir %{site_packages}
%{site_packages}/README
%{pylibdir}/*.py*
%{pylibdir}/*.doc
%{pylibdir}/wsgiref.egg-info
%dir %{pylibdir}/bsddb
%{pylibdir}/bsddb/*.py*
%{pylibdir}/compiler
%dir %{pylibdir}/ctypes
%{pylibdir}/ctypes/*.py*
%{pylibdir}/ctypes/macholib
%{pylibdir}/curses
%dir %{pylibdir}/distutils
%{pylibdir}/distutils/*.py*
%{pylibdir}/distutils/README
%{pylibdir}/distutils/command
%exclude %{pylibdir}/distutils/command/wininst-*.exe
%dir %{pylibdir}/email
%{pylibdir}/email/*.py*
%{pylibdir}/email/mime
%{pylibdir}/encodings
%{pylibdir}/hotshot
%{pylibdir}/idlelib
%{pylibdir}/importlib
%dir %{pylibdir}/json
%{pylibdir}/json/*.py*
%{pylibdir}/lib2to3
%exclude %{pylibdir}/lib2to3/tests
%{pylibdir}/logging
%{pylibdir}/multiprocessing
%{pylibdir}/plat-linux2
%{pylibdir}/pydoc_data
%dir %{pylibdir}/sqlite3
%{pylibdir}/sqlite3/*.py*

# Some bits of test are used for actual testing of stuff, not just python itself:
# See also https://bugzilla.redhat.com/show_bug.cgi?id=1528899
%dir %{pylibdir}/test
%{pylibdir}/test/__init__.py*
%{pylibdir}/test/support/
%{pylibdir}/test/script_helper.py*
%{pylibdir}/test/test_support.py*

%{pylibdir}/unittest
%{pylibdir}/wsgiref
%{pylibdir}/xml
%if "%{_lib}" == "lib64"
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages
%endif

# "Makefile" and the config-32/64.h file are needed by
# distutils/sysconfig.py:_init_posix(), so we include them in the libs
# package, along with their parent directories (bug 531901):
%dir %{pylibdir}/config
%{pylibdir}/config/Makefile
%dir %{_includedir}/python%{pybasever}
%{_includedir}/python%{pybasever}/%{_pyconfig_h}

%{_libdir}/%{py_INSTSONAME_optimized}
%if 0%{?with_systemtap}
%dir %(dirname %{tapsetdir})
%dir %{tapsetdir}
%{tapsetdir}/%{libpython_stp_optimized}
%doc systemtap-example.stp pyfuntop.stp
%endif

%dir %{pylibdir}/ensurepip/
%{pylibdir}/ensurepip/*.py*
%exclude %{pylibdir}/ensurepip/_bundled

%if %{with rewheel}
%dir %{pylibdir}/ensurepip/rewheel/
%{pylibdir}/ensurepip/rewheel/*.py*
%endif


%files devel
%defattr(-,root,root,-)
%{_libdir}/pkgconfig/python-%{pybasever}.pc
%{_libdir}/pkgconfig/python.pc
%{_libdir}/pkgconfig/python2.pc
%{pylibdir}/config/*
%exclude %{pylibdir}/config/Makefile
%exclude %{pylibdir}/distutils/command/wininst-*.exe
%{_includedir}/python%{pybasever}/*.h
%exclude %{_includedir}/python%{pybasever}/%{_pyconfig_h}
%doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit
%{_bindir}/python2-config
%{_bindir}/python%{pybasever}-config
%{_libdir}/libpython%{pybasever}.so

%if %{with tk_and_tools}
%files tools
%defattr(-,root,root,755)
%doc Tools/pynche/README.pynche
%{site_packages}/pynche
%{_bindir}/smtpd*.py*

# https://bugzilla.redhat.com/show_bug.cgi?id=1111275
%exclude %{_bindir}/2to3*

%{_bindir}/idle*
%{_bindir}/pynche*
%{_bindir}/pygettext*.py*
%{_bindir}/msgfmt*.py*
%{tools_dir}
%{demo_dir}
%{pylibdir}/Doc

%files tkinter
%defattr(-,root,root,755)
%{pylibdir}/lib-tk
%{dynload_dir}/_tkinter.so

%else #{with tk_and_tools}

%exclude %{site_packages}/pynche
%exclude %{_bindir}/smtpd*.py*

# https://bugzilla.redhat.com/show_bug.cgi?id=1111275
%exclude %{_bindir}/2to3*

%exclude %{_bindir}/idle*
%exclude %{_bindir}/pynche*
%exclude %{_bindir}/pygettext*.py*
%exclude %{_bindir}/msgfmt*.py*
%exclude %{tools_dir}
%exclude %{demo_dir}
%exclude %{pylibdir}/Doc

%exclude %{pylibdir}/lib-tk
%exclude %{dynload_dir}/_tkinter.so

%endif

%files test
%defattr(-, root, root, -)
%{pylibdir}/bsddb/test
%{pylibdir}/ctypes/test
%{pylibdir}/distutils/tests
%{pylibdir}/email/test
%{pylibdir}/json/tests
%{pylibdir}/lib2to3/tests
%{pylibdir}/sqlite3/test
%{pylibdir}/test/*

# Some bits of test are used for actual testing of stuff, not just python itself:
# See also https://bugzilla.redhat.com/show_bug.cgi?id=1528899
%exclude %{pylibdir}/test/__init__.py*
%exclude %{pylibdir}/test/support/
%exclude %{pylibdir}/test/script_helper.py*
%exclude %{pylibdir}/test/test_support.py*

%{dynload_dir}/_ctypes_test.so
%{dynload_dir}/_testcapimodule.so


# We don't bother splitting the debug build out into further subpackages:
# if you need it, you're probably a developer.

# Hence the manifest is the combination of analogous files in the manifests of
# all of the other subpackages

%if %{with debug_build}
%files debug
%defattr(-,root,root,-)

# Analog of the core subpackage's files:
%{_bindir}/python-debug
%{_bindir}/%{python}-debug
%{_bindir}/python%{pybasever}-debug

# Analog of the -libs subpackage's files, with debug builds of the built-in
# "extension" modules:

%{dynload_dir}/_md5module_d.so
%{dynload_dir}/_sha256module_d.so
%{dynload_dir}/_sha512module_d.so
%{dynload_dir}/_shamodule_d.so

%{dynload_dir}/_bisectmodule_d.so
%{dynload_dir}/_bsddb_d.so
%{dynload_dir}/_codecs_cn_d.so
%{dynload_dir}/_codecs_hk_d.so
%{dynload_dir}/_codecs_iso2022_d.so
%{dynload_dir}/_codecs_jp_d.so
%{dynload_dir}/_codecs_kr_d.so
%{dynload_dir}/_codecs_tw_d.so
%{dynload_dir}/_collectionsmodule_d.so
%{dynload_dir}/_csv_d.so
%{dynload_dir}/_ctypes_d.so
%{dynload_dir}/_curses_d.so
%{dynload_dir}/_curses_panel_d.so
%{dynload_dir}/_elementtree_d.so
%{dynload_dir}/_functoolsmodule_d.so
%{dynload_dir}/_hashlib_d.so
%{dynload_dir}/_heapq_d.so
%{dynload_dir}/_hotshot_d.so
%{dynload_dir}/_io_d.so
%{dynload_dir}/_json_d.so
%{dynload_dir}/_localemodule_d.so
%{dynload_dir}/_lsprof_d.so
%{dynload_dir}/_multibytecodecmodule_d.so
%{dynload_dir}/_multiprocessing_d.so
%{dynload_dir}/_randommodule_d.so
%{dynload_dir}/_socketmodule_d.so
%{dynload_dir}/_sqlite3_d.so
%{dynload_dir}/_ssl_d.so
%{dynload_dir}/_struct_d.so
%{dynload_dir}/arraymodule_d.so
%{dynload_dir}/audioop_d.so
%{dynload_dir}/binascii_d.so
%{dynload_dir}/bz2_d.so
%{dynload_dir}/cPickle_d.so
%{dynload_dir}/cStringIO_d.so
%{dynload_dir}/cmathmodule_d.so
%{dynload_dir}/_cryptmodule_d.so
%{dynload_dir}/datetime_d.so
%{dynload_dir}/dbm_d.so
%{dynload_dir}/dlmodule_d.so
%{dynload_dir}/fcntlmodule_d.so
%{dynload_dir}/future_builtins_d.so
%if %{with_gdbm}
%{dynload_dir}/gdbmmodule_d.so
%endif
%{dynload_dir}/grpmodule_d.so
%{dynload_dir}/imageop_d.so
%{dynload_dir}/itertoolsmodule_d.so
%{dynload_dir}/linuxaudiodev_d.so
%{dynload_dir}/math_d.so
%{dynload_dir}/mmapmodule_d.so
%{dynload_dir}/nismodule_d.so
%{dynload_dir}/operator_d.so
%{dynload_dir}/ossaudiodev_d.so
%{dynload_dir}/parsermodule_d.so
%{dynload_dir}/pyexpat_d.so
%{dynload_dir}/readline_d.so
%{dynload_dir}/resource_d.so
%{dynload_dir}/selectmodule_d.so
%{dynload_dir}/spwdmodule_d.so
%{dynload_dir}/stropmodule_d.so
%{dynload_dir}/syslog_d.so
%{dynload_dir}/termios_d.so
%{dynload_dir}/timemodule_d.so
%{dynload_dir}/timingmodule_d.so
%{dynload_dir}/unicodedata_d.so
%{dynload_dir}/xxsubtype_d.so
%{dynload_dir}/zlibmodule_d.so

# No need to split things out the "Makefile" and the config-32/64.h file as we
# do for the regular build above (bug 531901), since they're all in one package
# now; they're listed below, under "-devel":

%{_libdir}/%{py_INSTSONAME_debug}
%if 0%{?with_systemtap}
%dir %(dirname %{tapsetdir})
%dir %{tapsetdir}
%{tapsetdir}/%{libpython_stp_debug}
%endif

# Analog of the -devel subpackage's files:
%dir %{pylibdir}/config-debug
%{_libdir}/pkgconfig/python-%{pybasever}-debug.pc
%{_libdir}/pkgconfig/python-debug.pc
%{_libdir}/pkgconfig/python2-debug.pc
%{pylibdir}/config-debug/*
%{_includedir}/python%{pybasever}-debug/*.h
%{_bindir}/python-debug-config
%{_bindir}/python2-debug-config
%{_bindir}/python%{pybasever}-debug-config
%{_libdir}/libpython%{pybasever}_d.so

# Analog of the -tools subpackage's files:
#  None for now; we could build precanned versions that have the appropriate
# shebang if needed

%if ! 0%{?_module_build}
# Analog  of the tkinter subpackage's files:
%{dynload_dir}/_tkinter_d.so
%endif

# Analog  of the -test subpackage's files:
%{dynload_dir}/_ctypes_test_d.so
%{dynload_dir}/_testcapimodule_d.so

%endif # with debug_build

# We put the debug-gdb.py file inside /usr/lib/debug to avoid noise from
# ldconfig (rhbz:562980).
#
# The /usr/lib/rpm/redhat/macros defines the __debug_package macro to use
# debugfiles.list, and it appears that everything below /usr/lib/debug and
# (/usr/src/debug) gets added to this file (via LISTFILES) in
# /usr/lib/rpm/find-debuginfo.sh
#
# Hence by installing it below /usr/lib/debug we ensure it is added to the
# -debuginfo subpackage
# (if it doesn't, then the rpmbuild ought to fail since the debug-gdb.py
# payload file would be unpackaged)

# Workaround for rhbz#1476593
%undefine _debuginfo_subpackages

# ======================================================
# Finally, the changelog:
# ======================================================

%changelog
* Wed Oct 23 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.17-1
- Update to 2.7.17
Resolves: rhbz#1759946

* Tue Jun 11 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-8
- Fix urlparse.urlsplit() error message for Unicode URL
Resolves: rhbz#1689328

* Fri Jun 07 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-7
- Security fix for CVE-2019-10160
Resolves: rhbz#1689328

* Thu May 30 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-6
- Security fix for CVE-2019-9948
Resolves: rhbz#1704177

* Thu May 30 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-5
- Disallow control chars in http URLs
- Fixes CVE-2019-9740 and CVE-2019-9947
Resolves: rhbz#1704369 and rhbz#1703537

* Fri May 03 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-4
- Updated fix for CVE-2019-9636
Resolves: rhbz#1689328

* Fri Apr 12 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-3
- Fix coverity scan static analysis issues
Resolves: rhbz#1602667

* Wed Apr 3 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-2
- Security fix for CVE-2019-9636 (rhbz#1689328)

* Mon Apr 1 2019 Charalampos Stratakis <cstratak@redhat.com> - 2.7.16-1
- Update to 2.7.16
Resolves: rhbz#1680964

* Thu Nov 29 2018 Tomas Orsava <torsava@redhat.com> - 2.7.15-16
- Bump NVR to redo CI gating tests, because the "update test" was
  malfunctioning and had to be fixed
Resolves: rhbz#1565560

* Wed Nov 28 2018 Charalampos Stratakis <cstratak@redhat.com> - 2.7.15-15
- Workaround Python's threading library issue with non returning wait, for signals with timeout
Resolves: rhbz#1565560

* Tue Nov 13 2018 Charalampos Stratakis <cstratak@redhat.com> - 2.7.15-14
- Add choices for sort option of cProfile for better output
Resolves: rhbz#1565101

* Wed Nov 07 2018 Lumír Balhar <lbalhar@redhat.com> - 2.7.15-13
- Bring audiotest.au back to package. It's not copyrighted anymore.
- Resolves: rhbz#1643970

* Fri Oct 12 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.15-12
- Remove Windows binaries from the source archive
- Resolves: rhbz#1633220

* Fri Oct 12 2018 Charalampos Stratakis <cstratak@redhat.com> - 2.7.15-11
- Fix test_dbm_gnu for gdbm 1.15 which fails on ppc64le
Resolves: rhbz#1638710

* Mon Sep 24 2018 Miro Hrončok <mhroncok@redhat.com> - 2.7.15-10
- Security fix for CVE-2018-14647
Resolves: rhbz#1632095

* Sat Aug 04 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.15-9
- Disable Python 2 at the C level

* Fri Aug  3 2018 Florian Weimer <fweimer@redhat.com> - 2.7.15-8
- Honor %%{valgrind_arches}

* Thu Aug 02 2018 Charalampos Stratakis <cstratak@redhat.com> - 2.7.15-7
- Disable optimizations
- Disable ssl related tests for now

* Wed Jul 25 2018 Petr Kubat <pkubat@redhat.com> - 2.7.15-6
- Rebuilt for gdbm

* Mon Jul 09 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.15-5
- Don't build the tkinter and tools subpackages

* Thu Jun 28 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.15-4
- Disable Python 2
- Exclude the unversioned commands in /usr/bin
- Exclude the unversioned man page
- No longer Provide unversioned "python"

* Tue Jun 26 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.15-3
- Bump release

* Fri Jun 22 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.15-2
- Provide the python2-for-tests package
- Disable rewheel & ensurepip
- Disable the debug build

* Tue May 01 2018 Miro Hrončok <mhroncok@redhat.com> - 2.7.15-1
- Update to version 2.7.15

* Wed Apr 25 2018 Tomas Orsava <torsava@redhat.com> - 2.7.14-17
- Change shebangs to the proper versioned binary
- Bytecompile files manually, disbale brp-python-bytecompile
Resolves: rhbz#1572171

* Fri Apr 13 2018 Miro Hrončok <mhroncok@redhat.com> - 2.7.14-16
- Remove Obsoletes tag from when python was renamed to python2 (Fedora 25 was last)

* Wed Mar 14 2018 Miro Hrončok <mhroncok@redhat.com> - 2.7.14-15
- Fix broken SSL module
Resolves: rhbz#1555081

* Tue Mar 13 2018 Charalampos Stratakis <cstratak@redhat.com> - 2.7.14-14
- Do not send IP addresses in SNI TLS extension

* Mon Feb 26 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.14-13
- Fix -Wint-in-bool-context warnings
Resolves: rhbz#1473425

* Sat Feb 24 2018 Florian Weimer <fweimer@redhat.com> - 2.7.14-12
- Rebuild with new LDFLAGS from redhat-rpm-config

* Thu Feb 15 2018 Miro Hrončok <mhroncok@redhat.com> - 2.7.14-11
- Move test.support and test.script_helper to python2-libs
Resolves: rhbz#1528899

* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.14-10
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild

* Tue Jan 30 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.14-9
- Add patch 288: warn/fail if Python 2 is called as /usr/bin/python and
  PYTHON_DISALLOW_AMBIGUOUS_VERSION is set
- Add patch 289: Fix for over-aligned GC info

* Sat Jan 20 2018 Björn Esser <besser82@fedoraproject.org> - 2.7.14-8
- Rebuilt for switch to libxcrypt

* Wed Jan 17 2018 Petr Viktorin <pviktori@redhat.com> - 2.7.14-7
- Build the nis module with tirpc

* Tue Jan 16 2018 Miro Hrončok <mhroncok@redhat.com> - 2.7.14-6
- Rebuild for reverted gdbm 1.13 on Fedora 27

* Thu Jan 11 2018 Charalampos Stratakis <cstratak@redhat.com> - 2.7.14-5
- Rebuild for gdbm 1.14

* Mon Dec 11 2017 Charalampos Stratakis <cstratak@redhat.com> - 2.7.14-4
- Fix hanging of all threads when trying to access an inaccessible NFS server.

* Thu Nov 09 2017 Miro Hrončok <mhroncok@redhat.com> - 2.7.14-3
- Make the -devel package require redhat-rpm-config
Resolves: rhbz#1496757

* Thu Nov 02 2017 Charalampos Stratakis <cstratak@redhat.com> - 2.7.14-2
- Add a new PYTHONSHOWREFCOUNT environment variable for printing the reference
  count in debug builds.
- Fix nondeterministic read in test_pty.

* Mon Oct 09 2017 Iryna Shcherbina <ishcherb@redhat.com> - 2.7.14-1
- Update to version 2.7.14

* Thu Aug 31 2017 Tomas Orsava <torsava@redhat.com> - 2.7.13-18
- Switch some macros into bconds to facilitate modularity

* Wed Aug 16 2017 Miro Hrončok <mhroncok@redhat.com> - 2.7.13-17
- Exclude /usr/bin/2to3 (rhbz#1111275)

* Mon Aug 14 2017 David "Sanqui" Labský <dlabsky@redhat.com> - 2.7.13-16
- Do not generate debuginfo subpackages (#1476593)

* Wed Aug 09 2017 Michal Cyprian <mcyprian@redhat.com> - 2.7.13-15
- Revert "Add --executable option to install.py command"
  This enhancement is currently not needed and it can possibly
  collide with `pip --editable`option

* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.13-14
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild

* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.13-13
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild

* Mon Jun 26 2017 Charalampos Stratakis <cstratak@redhat.com> - 2.7.13-11
- Fix test_alpn_protocols from test_ssl

* Wed May 31 2017 Miro Hrončok <mhroncok@redhat.com> - 2.7.13-11
- Change fixed Obsoletes version with a dynamic one (rhbz#1457336)

* Thu May 18 2017 Karsten Hopp <karsten@redhat.com> - 2.7.13-10
- revert logic for modularity patch and enable gdbm for modularity 

* Tue May 16 2017 Tomas Orsava <torsava@redhat.com> - 2.7.13-9
- Added a dependency to the devel subpackage on python3-rpm-generators which
  have been excised out of rpm-build
- There is no Python 2 package containing Python RPM generators, therefore
  Python 3 is needed when Python 2 package is to be built, but this was
  decided not to be a problem due to nearing EOL of Python 2
- Involves: rhbz#1410631, rhbz#1444925

* Wed May 10 2017 Charalampos Stratakis <cstratak@redhat.com> - 2.7.13-8
- Enable profile guided optimizations for x86_64 and i686 architectures
- Update description to reflect that Python 2 is not the default Python

* Tue Apr 25 2017 Karsten Hopp <karsten@redhat.com> - 2.7.13-7
- apply modularity patch only during module builds

* Sun Apr 23 2017 Karsten Hopp <karsten@redhat.com> - 2.7.13-6
- add missing patch

* Fri Apr 21 2017 Karsten Hopp <karsten@redhat.com> - 2.7.13-5
- drop a couple of dependencies for Modularity builds

* Tue Feb 21 2017 Michal Cyprian <mcyprian@redhat.com> - 2.7.13-5
- Add --executable option to install.py command

* Fri Feb 17 2017 Charalampos Stratakis <cstratak@redhat.com> - 2.7.13-4
- Fix the upgrade path to F26 due to renaming the package to python2 (rhbz#1420332)

* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.13-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild

* Thu Jan 12 2017 Igor Gnatenko <ignatenko@redhat.com> - 2.7.13-2
- Rebuild for readline 7.x

* Wed Jan 11 2017 Charalampos Stratakis <cstratak@redhat.com> - 2.7.13-1
- Update to 2.7.13
- Don't blow up on EL7 kernel (random generator) (rhbz#1410175, rhbz#1410187)
- Require glibc >= 2.24.90-26 (rhbz#1410644)

* Thu Oct 27 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.12-9
- Rename package to python2 and also rename the subpackages accordingly
- Provide and obsolete python and the respective subpackages to ensure a clean
upgrade path
- Remove old provides for packages that got into stdlib
- Implement PEP 394

* Wed Oct 12 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.12-8
- Port ssl and hashlib modules to OpenSSL 1.1.0
- Drop hashlib patch for now
- Add riscv64 arch to 64bit and no-valgrind arches

* Thu Sep 29 2016 Miro Hrončok <mhroncok@redhat.com> - 2.7.12-7
- Provide python27

* Fri Sep 02 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.12-6
- Remove unversioned Obsoletes

* Thu Sep 01 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.12-5
- Rebase rewheel patch so it applies properly (rhbz#1372183)

* Tue Aug 09 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.12-4
- SPEC file cleanup
- Removal of unapplied patches

* Tue Aug 09 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.12-3
- Fix for CVE-2016-1000110 HTTPoxy attack
- SPEC file cleanup

* Mon Aug 01 2016 Michal Toman <mtoman@fedoraproject.org> - 2.7.12-2
- Build properly on MIPS

* Fri Jul 15 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.12-1
- Update to 2.7.12
- Refactored patches: 10, 102, 112, 134, 153
- Dropped patches: 166, 209, 210

* Fri Jul 08 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.11-8
- Refactor patch for properly fixing CVE-2016-5636

* Fri Jul 08 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.11-7
- Fix test_pyexpat failure with Expat version of 2.2.0

* Thu Jun 16 2016 Tomas Orsava <torsava@redhat.com> - 2.7.11-6
- Fix for: CVE-2016-0772 python: smtplib StartTLS stripping attack
- Raise an error when STARTTLS fails
- rhbz#1303647: https://bugzilla.redhat.com/show_bug.cgi?id=1303647
- rhbz#1346344: https://bugzilla.redhat.com/show_bug.cgi?id=1346344
- Fixed upstream: https://hg.python.org/cpython/rev/b3ce713fb9be

* Mon Jun 13 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.7.11-5
- Added patch for fixing possible integer overflow and heap corruption in zipimporter.get_data()

* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.11-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild

* Wed Jan 13 2016 Orion Poplawski <orion@cora.nwra.com> - 2.7.11-3
- Drop macros, require python/python2-rpm-macros

* Wed Dec 30 2015 Orion Poplawski <orion@cora.nwra.com> - 2.7.11-2
- Get ready for separate python-macros package

* Tue Dec 15 2015 Robert Kuska <rkuska@redhat.com> - 2.7.11-1
- Update to 2.7.11

* Thu Oct 15 2015 Thomas Spura <tomspur@fedoraproject.org> - 2.7.10-11
- provide/obsolete _isa packages in python_provide (#1271776)

* Wed Sep 23 2015 Robert Kuska <rkuska@redhat.com> - 2.7.10-10
- Revert the moving modules to python-tools because distutils uses lib2to3

* Tue Sep 22 2015 Robert Kuska <rkuska@redhat.com> - 2.7.10-9
- Move idlelib and lib2to3 modules to pythont-tools

* Thu Sep 3 2015 Orion Poplawski <orion@cora.nwra.com> - 2.7.10-8
- Fix quoting in %%python_provide macro

* Thu Sep 3 2015 Orion Poplawski <orion@cora.nwra.com> - 2.7.10-7
- Add obsoletes to %%python_provide macro to fix upgrade path
- Fix python2- provides for python- packages in %%python_provide

* Thu Jul 23 2015 Thomas Spura <tomspur@fedoraproject.org> - 2.7.10-6
- python-macros: remove R on python (#1246036)

* Wed Jul 22 2015 Thomas Spura <tomspur@fedoraproject.org> - 2.7.10-5
- Include epoch in the python_provide macro fpc#534 (Slavek Kabrda)

* Mon Jun 29 2015 Thomas Spura <tomspur@fedoraproject.org> - 2.7.10-4
- correct python_provide macro to include version only when emiting provides

* Thu Jun 25 2015 Thomas Spura <tomspur@fedoraproject.org> - 2.7.10-3
- Add unversioned python-macros from fpc#281 and fpc#534
  and require it from python-devel
- Make python-macros noarch

* Wed Jun 17 2015 Matej Stuchlik <mstuchli@redhat.com> - 2.7.10-2
- Make relocating Python by changing _prefix actually work
Resolves: rhbz#1231801

* Mon May 25 2015 Matej Stuchlik <mstuchli@redhat.com> - 2.7.10-1
- Update to 2.7.10

* Tue May  5 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2.7.9-11
- Disable test_gdb on aarch64 (rhbz#1196181), it joins all other non x86 arches

* Wed Apr 15 2015 Robert Kuska <rkuska@redhat.com> - 2.7.9-10
- Remove provides/obsolates for unittest2
- Skip test_gdb on arm until rhbz#1196181 is resolved

* Thu Mar 05 2015 Matej Stuchlik <mstuchli@redhat.com> - 2.7.9-9
- Add proper rewheel Requires

* Sat Feb 21 2015 Till Maas <opensource@till.name> - 2.7.9-8
- Rebuilt for Fedora 23 Change
  https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code

* Sat Feb 21 2015 Till Maas <opensource@till.name> - 2.7.9-7
- Rebuilt for Fedora 23 Change
  https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code

* Tue Feb 17 2015 Ville Skyttä <ville.skytta@iki.fi> - 2.7.9-6
- Own systemtap dirs (#710733)

* Fri Feb 06 2015 Karsten Hopp <karsten@redhat.com> 2.7.9-5
- disable test_gdb on ppc64* until rhbz#1132488 is really resolved

* Tue Jan 20 2015 Slavek Kabrda <bkabrda@redhat.com> - 2.7.9-4
- We need to provide both arch specific and noarch Provide for python2-devel
in order not to break noarch builds.

* Tue Jan 20 2015 Slavek Kabrda <bkabrda@redhat.com> - 2.7.9-3
- Make python2-devel provide arch specific.
Resolves: rhbz#1183530

* Mon Jan 12 2015 Dan Horák <dan[at]danny.cz> - 2.7.9-2
- build with valgrind on ppc64le
- disable test_gdb on s390(x) until rhbz#1181034 is resolved

* Thu Dec 11 2014 Matej Stuchlik <mstuchli@redhat.com> - 2.7.9-1
- Update to 2.7.9
- Refreshed patches: #55, #137, #146, #153, #156, #198
- Dropped patches: #196, #197
- New patch: #199
- Added the rewheel module

* Mon Nov 24 2014 Matej Stuchlik <mstuchli@redhat.com> - 2.7.8-10
- Improve python2_version macros

* Thu Nov 13 2014 Matej Stuchlik <mstuchli@redhat.com> - 2.7.8-9
- Add python2_version_nodots macro

* Mon Nov 10 2014 Slavek Kabrda <bkabrda@redhat.com> - 2.7.8-8
- Revert previous change, see rhbz#1161166#c6.

* Fri Nov 07 2014 Slavek Kabrda <bkabrda@redhat.com> - 2.7.8-7
- Provide importable unittest2
Resolves: rhbz#1161166

* Thu Aug 21 2014 Robert Kuska <rkuska@redhat.com> - 2.7.8-6
- Update patch 196 (ssl backport)

* Tue Aug 19 2014 Robert Kuska <rkuska@redhat.com> - 2.7.8-5
- Backport ssl module from python3

* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.7.8-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild

* Thu Jul 31 2014 Tom Callaway <spot@fedoraproject.org> - 2.7.8-3
- fix license handling

* Fri Jul 18 2014 Robert Kuska <rkuska@redhat.com> - 2.7.8-2
- Enable SSLv2 and SSLv3 when SSLv23_method is used in ssl

* Mon Jul 14 2014 Robert Kuska <rkuska@redhat.com> - 2.7.8-1
- Update to 2.7.8

* Fri Jul 11 2014 Dan Horák <dan[at]danny.cz> - 2.7.7-3
- rebuilt for updated libffi ABI on ppc64le

* Sat Jun  7 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2.7.7-2
- aarch64 has valgrind, just list those that don't support it

* Wed Jun 04 2014 Matej Stuchlik <mstuchli@redhat.com> - 2.7.7-1
- Update to 2.7.7
- Refreshed patches: #16, #112, #138, #147, #157, #166, #173, #5000
- Dropped patches: #190, #192, #194

* Tue Jun 03 2014 Dan Horák <dan[at]danny.cz> - 2.7.6-9
- update the arch list where valgrind exists - %%power64 includes also
    ppc64le which is not supported yet

* Wed May 21 2014 Jaroslav Škarvada <jskarvad@redhat.com> - 2.7.6-8
- Rebuilt for https://fedoraproject.org/wiki/Changes/f21tcl86

* Fri May 09 2014 Tomas Radej <tradej@redhat.com> - 2.7.6-7
- Fixed obsoletes on ordereddict (bz #1095434)

* Mon Apr 14 2014 Tomas Radej <tradej@redhat.com> - 2.7.6-6
- Obsoletes python-ordereddict (bz #1085593, not precisely 1:1 replacement)

* Mon Apr 07 2014 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.6-5
- Fix test failure with SQLite > 3.8.4.
- Obsolete/Provide python-unittest2
Related: rhbz#1060426

* Wed Feb 19 2014 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.6-4
- Enable loading sqlite extensions.
Resolves: rhbz#1066708

* Mon Feb 10 2014 Tomas Radej <tradej@redhat.com> - 2.7.6-3
- Fixed buffer overflow (upstream patch)
Resolves: rhbz#1062375

* Tue Feb 04 2014 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.6-2
- Install macros in _rpmconfigdir.

* Wed Jan 29 2014 Tomas Radej <tradej@redhat.com> - 2.7.6-1
- Updated to v2.7.6
- Freshened patches 102, 111, 112, 136, and 142
- Dropped patches 186, 188 (both fixed upstream)

* Wed Jan 15 2014 Matej Stuchlik <mstuchli@redhat.com> - 2.7.5-11
- Make library-files user writable to get rid of
  Permission Denied in buildlog from debuginfo-packaging

* Tue Jan 14 2014 Dennis Gilmore <dennis@ausil.us> - 2.7.5-10
- enable valgrind support on 32 bit arm

* Tue Nov 12 2013 Tomas Radej <tradej@redhat.com> - 2.7.5-9
- Import get_python_version in bdist_rpm
Resolves: rhbz#1029082

* Tue Oct 08 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.5-8
- Fix processing gdb py-bt command in eval calls.
Resolves: rhbz#1008154

* Tue Sep 03 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.5-7
- Removed ancient Obsolete: python-sqlite2.

* Mon Aug 26 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.5-6
- Sync back/renumber patches to stay consistent with rhel.

* Mon Aug 19 2013 Matej Stuchlik <mstuchli@redhat.com> - 2.7.5-5
- Added fix for CVE-2013-4238 (rhbz#998430)

* Sun Aug 04 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.7.5-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild

* Mon Jul 08 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.5-3
- Fix build with libffi containing multilib wrapper for ffi.h (rhbz#979696).

* Mon Jul 08 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.5-2
- Obsolete PyXML as requested in rhbz#981137.

* Thu May 16 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.5-1
- Updated to Python 2.7.5.
- Refreshed patches: 0 (config), 102 (lib64), 121 (add Modules to build path),
153 (gdb test noise)
- Dropped patches: 126, 127 (big endian issues, both fixed upstream),
175 (configure -Wformat, fixed upstream)
- Synced patch numbers with python3.spec.

* Tue May 14 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.4-5
- fix multilib issue in python-tools due to /usr/bin/pynche (source 7;
rhbz#831437)

* Thu May 02 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.4-4
- Add patch that enables building on ppc64p7.

* Mon Apr 22 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.4-3
- Allow arbitrary timeout in Condition.wait (rhbz#917709).

* Thu Apr 11 2013 Kalev Lember <kalevlember@gmail.com> - 2.7.4-2
- Build with libdb 5.3 instead of libdb4
- Refreshed patches: 0 (config), 102 (lib64)
- Dropped patches: 54 (db4 version), 159 (db4 include path adjustment)

* Mon Apr 08 2013 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.4-1
- Updated to Python 2.7.4.
- Refreshed patches: 0 (config), 7 (sqlite encoding), 16 (rpath in config),
55 (systemtap), 111 (no static lib), 112 (debug build), 113 (more
configuration flags), 130 (add extension to python config), 134 (fix
COUNT_ALLOCS in test_sys), 146 (haslib FIPS), 147 (add debug malloc stats),
153 (fix gdb test noise), 157 (uid, gid overflow - fixed upstream, just
keeping few more downstream tests), 165 (crypt module salt backport),
175 (fix configure Wformat), 5000 (regenerated autotooling patch)
- Dropped patches: 101 (lib64 regex; merged upstream), 171 (exception on
missing /dev/urandom; merged upstream), 172 (poll for multiprocessing socket
connection; merged upstream)

* Mon Mar 25 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-35
- fix gcc 4.8 incompatibility (rhbz#927358); regenerate autotool intermediates

* Wed Mar  6 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-34
- restrict scope of workaround for cmpi-bindings issue to avoid breaking
in-tree running of test_sys and test_subprocess (rhbz#817554)

* Wed Mar  6 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-33
- add workaround for cmpi-bindings issue (rhbz#817554)

* Mon Mar  4 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-32
- add workaround for ENOPROTOOPT seen running selftests in Koji
(rhbz#913732)

* Mon Mar  4 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-31
- remove config flag from /etc/rpm/macros.python2

* Fri Feb 22 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-30
- remove __debug_package macro from comment

* Fri Feb 22 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-29
- drop -b from application of patch 157 (uid/gid overflows)

* Fri Feb 22 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-28
- fix bogus dates in changelog

* Thu Feb 21 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-27
- port _multiprocessing.Connection.poll() to use the "poll" syscall, rather
than "select", allowing large numbers of subprocesses (patch 172;
rhbz#849992)

* Thu Feb 21 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-26
- raise correct exception in os.urandom() when /dev/urandom is missing
(patch 171; rhbz#907383)

* Wed Feb 20 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-25
- in debug builds, try to print repr() when a C-level assert fails in the
garbage collector (typically indicating a reference-counting error somewhere
else e.g in an extension module) (patch 170; rhbz#850013)

* Wed Feb 20 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-24
- move lib2to3/tests from python-libs to python-test (rhbz#850056)

* Wed Feb 20 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-23
- use SHA-256 rather than implicitly using MD5 within the challenge handling
in multiprocessing.connection (patch 169; rhbz#879695)

* Wed Feb 20 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-22
- fix a problem with distutils.sysconfig when CFLAGS is defined in the
environment (patch 168; rhbz#849994)

* Wed Feb 20 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-21
- don't run any stack navigation tests in test_gdb for optimized builds
(patch 167; rhbz#912025)

* Wed Feb 20 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-20
- s/cryptmodule/_cryptmodule/ in package payload (rhbz#835021)

* Tue Feb 19 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-19
- bulletproof the gdb debugging hooks against a failure seen in ARM builds
(patch 166; rhbz#912025)
- re-enable make check on ARM (rhbz#912025)

* Tue Feb 19 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-18
- backport pre-canned ways of salting a password to the "crypt" module from 3.3
(rhbz#835021)

* Tue Feb 19 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-17
- remove "_default_patch_fuzz" directive to avoid patches being silently
misapplied (refresh patch 1, patch 101, patch 102, patch 111, patch 121,
patch 158; rename patch 1, patch 101, patch 121; apply patch 54 before the
lib64 patches to avoid fuzz problems caused by the conditional application
of the lib64 patches)

* Mon Feb 18 2013 Peter Robinson <pbrobinson@fedoraproject.org> 2.7.3-16
- disable make check on ARM for the moment until 912025 is fixed

* Mon Feb 11 2013 David Malcolm <dmalcolm@redhat.com> - 2.7.3-15
- add aarch64 (rhbz#909783)

* Thu Nov 29 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-14
- add BR on bluez-libs-devel (rhbz#879720)

* Thu Aug  9 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-13
- remove f18 conditional from patch 159

* Fri Jul 27 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.7.3-12
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild

* Tue Jul 17 2012 Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.3-11
- fix memory leak in module _hashlib (patch 158, rhbz#836285)
- fix db4 include path for libdb4 package (f18 and above) (patch 159)

* Tue Jun 26 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-10
- fix missing include in uid/gid handling patch (patch 157; rhbz#830405)

* Fri Jun 22 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-9
- use rpm macro for power64 (rhbz#834653)

* Tue May 15 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-8
- update uid/gid handling to avoid int overflows seen with uid/gid
values >= 2^31 on 32-bit architectures (patch 157; rhbz#697470)

* Fri May  4 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-7
- renumber autotools patch from 300 to 5000
- specfile cleanups

* Mon Apr 30 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-6
- try again to fix test_gdb.py (patch 156; rhbz#817072)

* Mon Apr 30 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-5
- fix test_gdb.py (patch 156; rhbz#817072)

* Fri Apr 20 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-4
- avoid allocating thunks in ctypes unless absolutely necessary, to avoid
generating SELinux denials on "import ctypes" and "import uuid" when embedding
Python within httpd (patch 155; rhbz#814391)

* Thu Apr 19 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-3
- add explicit version requirements on expat to avoid linkage problems with
XML_SetHashSalt

* Wed Apr 18 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-2
- fix -config symlinks (patch 112; rhbz#813836)

* Wed Apr 11 2012 David Malcolm <dmalcolm@redhat.com> - 2.7.3-1
- 2.7.3: refresh patch 102 (lib64); drop upstream patches 11 (ascii-to-lower),
115 (pydoc robustness), 145 (linux2), 148 (gdbm magic values), 151 (deadlock
in fork); refresh patch 112 (debug build); revise patch 127
(test_structmember); fix test_gdb (patch 153); refresh patch 137 (distutils
tests); add python2.pc to python-devel; regenerate the autotool intermediates
patch (patch 300)

* Sat Feb 25 2012 Thomas Spura <tomspur@fedoraproject.org> - 2.7.2-20
- fix deadlock issue (#787712)

* Fri Feb 17 2012 Toshio Kuratomi <toshio@fedoraproject.org> - 2.7.2-19
- Obsolete python-sqlite2

* Thu Nov 24 2011 Ville Skyttä <ville.skytta@iki.fi> - 2.7.2-18
- Build with $RPM_LD_FLAGS (#756862).
- Use xz-compressed source tarball.

* Wed Oct 26 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.7.2-17
- Rebuilt for glibc bug#747377

* Fri Sep 30 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-16
- re-enable gdbm (patch 148; rhbz#742242)

* Fri Sep 16 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-15
- add a sys._debugmallocstats() function (patch 147)

* Wed Sep 14 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-14
- support OpenSSL FIPS mode in _hashlib and hashlib; don't build the _md5 and
_sha* modules, relying on _hashlib in hashlib, and thus within md5 etc
(rhbz#563986; patch 146)

* Wed Sep 14 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-13
- force sys.platform to be "linux2" (patch 145)

* Tue Sep 13 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-12
- disable gdbm module to prepare for gdbm soname bump

* Mon Sep 12 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-11
- rename and renumber patches for consistency with python3.spec (55, 111, 113,
114, 125, 131, 129 to 143)

* Sat Sep 10 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-10
- rewrite of "check", introducing downstream-only hooks for skipping specific
cases in an rpmbuild (patch 132), and fixing/skipping failing tests in a more
fine-grained manner than before (patches 104, 133-142)

* Thu Sep  1 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-9
- run selftests with "--verbose"
- disable parts of test_io on ppc (rhbz#732998)

* Tue Aug 23 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-8
- add --extension-suffix option to python-config (patch 130; rhbz#732808)

* Tue Aug 23 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-7
- re-enable and fix the --with-tsc option on ppc64, and rework it on 32-bit
ppc to avoid aliasing violations (patch 129; rhbz#698726)

* Tue Aug 23 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-6
- don't use --with-tsc on ppc64 debug builds (rhbz#698726)

* Thu Aug 18 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-5
- add rpm macros file (rhbz#731800)

* Fri Jul  8 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-4
- cleanup of BuildRequires; add comment headings to specfile sections

* Wed Jun 22 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-3
- reorganize test exclusions (test_openpty and test_pty seem to be failing on
every arch, not just the explicitly-listed ones)

* Mon Jun 13 2011 Dan Horák <dan[at]danny.cz> - 2.7.2-2
- add s390(x) excluded tests

* Mon Jun 13 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.2-1
- 2.7.2; drop upstreamed patches: patch 122 (parallel make fix), patch 124
(test_commands and SELinux), patch 130 (ppc preprocessor macro in debug
build); patch 131 (decimal in Turkish locale); regenerate the autotool
intermediates patch (patch 300)

* Tue Jun 07 2011 Dennis Gilmore <dennis@ausil.us> - 2.7.1-9
- fix sparc building by excluding failing tests RHBZ#711584

* Mon May 23 2011 Peter Robinson <pbrobinson@gmail.com> - 2.7.1-8
- fix compile on ARM by excluding failing tests on arm - RHBZ #706253

* Tue Apr 12 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.1-7
- fix "import decimal" in the Turkish locale (patch 131; rhbz#694928)

* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.7.1-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild

* Fri Jan  21 2011 Toshio Kuratomi <toshio@fedoraproject.org> - 2.7.1-5
- Switch from setting OPT to setting EXTRA_CFLAGS so we don't overwrite the
  DNDEBUG flag

* Fri Jan  7 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.1-4
- for now, drop "obsoletes" of python-argparse, since it interracts badly with
multilib (rhbz#667984)

* Fri Jan  7 2011 Thomas Spura <tomspur@fedoraproject.org> - 2.7.1-3
- obsolete/provide python-argparse (new in 2.7)

* Thu Jan  6 2011 David Malcolm <dmalcolm@redhat.com> - 2.7.1-2
- fix the ppc build of the debug configuration (patch 130; rhbz#661510)

* Thu Dec 23 2010 David Malcolm <dmalcolm@redhat.com> - 2.7.1-1
- 2.7.1, reworking patch 0 (config), patch 102 (lib64); drop upstream
patch 56 (cfgparse), patch 110 (ctypes/SELinux/noexecmem), patch 119 (expat
compat), patch 123 (2to3 on "from itertools import *")
- fix test_abc's test_cache_leak in the debug build (patch 128)
- drop _weakref.so from manifest (_weakref became a core module in r84230)

* Wed Sep 29 2010 jkeating - 2.7-13
- Rebuilt for gcc bug 634757

* Mon Sep 27 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-12
- fix test_structmember on 64bit-bigendian (patch 127)

* Fri Sep 24 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-11
- fix dbm_contains on 64bit-bigendian (patch 126; rhbz#626756)

* Thu Sep 16 2010 Toshio Kuratomi <toshio@fedoraproject.org> - 2.7-10
- backport a patch to fix a change in behaviour in configparse.

* Thu Sep  9 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-9
- move most of the payload of the core package to the libs subpackage, given
that the libs aren't meaningfully usable without the standard libraries

* Wed Aug 18 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-8
- add %%check section
- update lib64 patch (patch 102) to fix expected output in test_site.py on
64-bit systems
- patch test_commands.py to work with SELinux (patch 124)
- patch the debug build's usage of COUNT_ALLOCS to be less verbose (patch 125)

* Mon Jul 26 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-7
- fixup missing -lcrypt to "crypt" module in config patch (patch 0)

* Mon Jul 26 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-6
- re-enable systemtap
- cherrypick upstream patch to 2to3 for "from itertools import *"
traceback (patch 123)

* Thu Jul 22 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-5
- disable systemtap for now (dtrace is failing on startup due to the bug
mentioned in 2.7-4)
- provide relative path to python binary when running pathfix.py
- fix parallel make (patch 122)

* Thu Jul 22 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-4
- fix reference to pyconfig.h in sysconfig that led to failure on startup if
python-devel was not installed

* Thu Jul  8 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-3
- add patch to fixup the new sysconfig.py for our multilib support on
64-bit (patch 103)

* Thu Jul  8 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-2
- add machinery for regenerating the "configure" script in the face of
mismatching autoconf versions (patch 300)

* Tue Jul  6 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-1
- 2.7 final; drop alphatag
- drop patch 117 (upstream), patch 120 (upstreamed)
- fix the commented-out __python_ver from 26 to 27

* Tue Jun 22 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-0.1.rc2
- 2.7rc2
- revert r79310 (patch 121)
- remove modulator: upstream removed it in r78338
- rename mathmodule(_d).so to math(_d).so in manifests (appears to be changed
by r76861)
- _bytesio(_d).so and _filesio(_d).so were consolidated into _io(_d).so in
r73394 (upstream issue 6215)
- use the gdb hooks from the upstream tarball, rather than keeping our own
copy. The upstream version has some whitespace changes, a new write_repr for
unicode objects, and various bulletproofings for being run on older gdbs

* Tue Jun 22 2010 David Malcolm <dmalcolm@redhat.com> - 2.7-0.1.rc1
- 2.7rc1:
  - rework patches to apply against 2.7 (which among other changes has had a
whitespace cleanup of the .c code): .rhconfig (patch0), .binutils-no-dep
(patch10), .ascii-tolower (patch11), .socketmodule (patch13), .socketmodule2
(patch14), .systemtap (patch55), .lib64 (patch102), .selinux (patch110),
.no-static-lib (patch111), .debug-build (patch112), .statvfs-f-flag-constants
(patch114), ..CVE-2010-2089 (patch117)
  - drop upstream patches: .expat (patch3), .brprpm (patch51), .valgrind
(patch52), .db48 (patch53), .CVE-2010-1634 (patch 116), .CVE-2008-5983 (patch
118)

* Tue Jun 22 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-17
- Stop python bailing out with an assertion failure when UnicodeDecodeErrors
occur on very large buffers (patch 120, upstream issue 9058)

* Mon Jun 21 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-16
- Fix an incompatibility between pyexpat and the system expat-2.0.1 that led to
a segfault running test_pyexpat.py (patch 119; upstream issue 9054)

* Tue Jun  8 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-15
- add a flag to make it easy to turn off the debug build when troubleshooting
the rpm build

* Sat Jun  5 2010 Dan Horák <dan[at]danny.cz> - 2.6.5-14
- reading the timestamp counter is available only on some arches (see Python/ceval.c)
- disable --with-valgrind on s390(x) arches

* Fri Jun  4 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-13
- ensure that the compiler is invoked with "-fwrapv" (rhbz#594819)
- CVE-2010-1634: fix various integer overflow checks in the audioop
module (patch 116)
- CVE-2010-2089: further checks within the audioop module (patch 117)
- CVE-2008-5983: the new PySys_SetArgvEx entry point from r81399 (patch 118)

* Thu May 27 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-12
- make "pydoc -k" more robust in the face of broken modules (rhbz:461419, patch115)

* Wed May 26 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-11
- add flags for statvfs.f_flag to the constant list in posixmodule (i.e. "os")
(patch 114)

* Tue May 25 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-10
- add configure-time support for COUNT_ALLOCS and CALL_PROFILE debug options
(patch 113); enable them and the WITH_TSC option within the debug build

* Tue May 18 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-9
- build and install two different configurations of Python: debug and standard,
packaging the debug build in a new "python-debug" subpackage (patch 112)

* Tue May  4 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-8
- don't delete wsgiref.egg-info (rhbz:588426)

* Mon Apr 26 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-7
- disable --with-valgrind on sparc arches

* Mon Apr 12 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-6
- move the "bdist_wininst" command's template .exe files from the core package
to the devel subpackage, to save space (rhbz:525469)
- fix stray doublelisting of config directory wildcard in devel subpackage

* Wed Mar 31 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-5
- update python-gdb.py from v4 to v5 (improving performance and stability,
adding commands)

* Thu Mar 25 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-4
- update python-gdb.py from v3 to v4 (fixing infinite recursion on reference
cycles and tracebacks on bytes 0x80-0xff in strings, adding handlers for sets
and exceptions)

* Wed Mar 24 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-3
- refresh gdb hooks to v3 (reworking how they are packaged)

* Mon Mar 22 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-2
- remove unnecessary arch-conditionality for patch 101

* Fri Mar 19 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.5-1
- update to 2.6.5: http://www.python.org/download/releases/2.6.5/
- replace our patch to compile against db4.8 with a patch from
upstream (patch 53, from r78974); update patch 54 since part of it is now in
that upstream patch
- update patch 110 so that it still applies in the face of upstream r78380

* Tue Mar 16 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-23
- fixup distutils/unixccompiler.py to remove standard library path from
rpath (patch 17)
- delete DOS batch files

* Fri Mar 12 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-22
- add pyfuntop.stp; allow systemtap support to be disabled
- remove trailing period from tkinter summary
- don't own /usr/bin/python-config if you're not the main python

* Thu Mar 11 2010 Marcela Mašláňová <mmaslano@redhat.com> - 2.6.4-21
- rebuild with new gdbm

* Thu Feb 11 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-20
- avoid having the "test" subdirectory and the files within it that are in the
core subpackage also be owned by the test subpackage (rhbz:467588)

* Wed Feb 10 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-19
- revise the systemtap patch (patch 55:python-2.6.4-dtrace.patch) to the
new version by mjw in attachment 390110 of rhbz:545179, as this should
eliminate the performance penalty for the case where the probes aren't in
use, and eliminate all architecture-specific code (rhbz:563541; except on
sparc)

* Tue Feb  9 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-18
- add a systemtap tapset defining "python.function.entry" and
"python.function.return" to make it easy to use the static probepoint within
Python; add an example of using the tapset to the docs

* Tue Feb  9 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-17
- add systemtap static probes (wcohen; patch 55; rh bug #545179)
- update some comments in specfile relating to gdb work
- manually byte-compile the gdb.py file with the freshly-built python to ensure
that .pyx and .pyo files make it into the debuginfo manifest if they are later
byte-compiled after find-debuginfo.sh is run

* Mon Feb  8 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-16
- move the -gdb.py file from %%{_libdir}/INSTSONAME-gdb.py to
%%{_prefix}/lib/debug/%%{_libdir}/INSTSONAME.debug-gdb.py to avoid noise from
ldconfig (bug 562980), and which should also ensure it becomes part of the
debuginfo subpackage, rather than the libs subpackage
- introduce %%{py_SOVERSION} and %%{py_INSTSONAME} to reflect the upstream
configure script, and to avoid fragile scripts that try to figure this out
dynamically (e.g. for the -gdb.py change)

* Mon Feb  8 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-15
- work around bug 562906 by supplying a fixed version of pythondeps.sh
- set %%{_python_bytecompile_errors_terminate_build} to 0 to prevent the broken
test files from killing the build on buildroots where python is installed

* Fri Feb  5 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-14
- add gdb hooks for easier debugging

* Fri Jan 29 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-13
- document all patches, and remove the commented-out ones

* Tue Jan 26 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-12
- Address some of the issues identified in package review (bug 226342):
  - update libs requirement on base package to use %%{name} for consistency's
sake
  - convert from backticks to $() syntax throughout
  - wrap value of LD_LIBRARY_PATH in quotes
  - convert "/usr/bin/find" requirement to "findutils"
  - remove trailing periods from summaries of -devel and -tools subpackages
  - fix spelling mistake in description of -test subpackage
  - convert usage of $$RPM_BUILD_ROOT to %%{buildroot} throughout, for
stylistic consistency
  - supply dirmode arguments to defattr directives

* Mon Jan 25 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-11
- update python-2.6.2-config.patch to remove downstream customization of build
of pyexpat and elementtree modules
- add patch adapted from upstream (patch 3) to add support for building against
system expat; add --with-system-expat to "configure" invocation
- remove embedded copy of expat from source tree during "prep"

* Mon Jan 25 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-10
- introduce macros for 3 directories, replacing expanded references throughout:
%%{pylibdir}, %%{dynload_dir}, %%{site_packages}
- explicitly list all lib-dynload files, rather than dynamically gathering the
payload into a temporary text file, so that we can be sure what we are
shipping; remove now-redundant testing for presence of certain .so files
- remove embedded copy of zlib from source tree before building

* Mon Jan 25 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-9
- change python-2.6.2-config.patch to remove our downstream change to curses
configuration in Modules/Setup.dist, so that the curses modules are built using
setup.py with the downstream default (linking against libncursesw.so, rather
than libncurses.so), rather than within the Makefile; add a test to %%install
to verify the dso files that the curses module is linked against the correct
DSO (bug 539917; changes _cursesmodule.so -> _curses.so)

* Fri Jan 22 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-8
- rebuild (bug 556975)

* Wed Jan 20 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-7
- move lib2to3 from -tools subpackage to main package (bug 556667)

* Mon Jan 18 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-6
- patch Makefile.pre.in to avoid building static library (patch111, bug 556092)
- split up the "configure" invocation flags onto individual lines

* Fri Jan 15 2010 David Malcolm <dmalcolm@redhat.com> - 2.6.4-5
- replace usage of %%define with %%global
- use the %%{_isa} macro to ensure that the python-devel dependency on python
is for the correct multilib arch (#555943)
- delete bundled copy of libffi to make sure we use the system one
- replace references to /usr with %%{_prefix}; replace references to
/usr/include with %%{_includedir}

* Wed Dec 16 2009 David Malcolm <dmalcolm@redhat.com> - 2.6.4-4
- automatically disable arena allocator when run under valgrind (upstream
issue 2422; patch 52)
- add patch from Josh Boyer containing diff against upstream PyBSDDB to make
the bsddb module compile against db-4.8 (patch 53, #544275); bump the necessary
version of db4-devel to 4.8
- patch setup.py so that it searches for db-4.8, and enable debug output for
said search; make Setup.dist use db-4.8 (patch 54)

* Thu Nov 12 2009 David Malcolm <dmalcolm@redhat.com> - 2.6.4-3
- fixup the build when __python_ver is set (Zach Sadecki; bug 533989); use
pybasever in the files section

* Thu Oct 29 2009 David Malcolm <dmalcolm@redhat.com> - 2.6.4-2
- "Makefile" and the config-32/64.h file are needed by distutils/sysconfig.py
_init_posix(), so we include them in the core package, along with their parent
directories (bug 531901)

* Mon Oct 26 2009 David Malcolm <dmalcolm@redhat.com> - 2.6.4-1
- Update to 2.6.4

* Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.6.2-2
- rebuilt with new openssl

* Mon Jul 27 2009 James Antill <james.antill@redhat.com> - 2.6.2-1
- Update to 2.6.2

* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6-11
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

* Sat Jul 4 2009 Jonathan Steffan <jsteffan@fedoraproject.org> - 2.6-10
- Move python-config to devel subpackage (#506153)
- Update BuildRoot for new standard

* Sun Jun 28 2009 Jonathan Steffan <jsteffan@fedoraproject.org> - 2.6-9
- Update python-tools description (#448940)

* Wed Apr 15 2009 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> 2.6-8
- Replace python-hashlib and python-uuid (#484715)

* Tue Mar 17 2009 James Antill <james@fedoraproject.org> - 2.6-7
- Use system libffi
- Resolves: bug#490573
- Fix SELinux execmem problems
- Resolves: bug#488396

* Thu Feb 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.6-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild

* Fri Jan 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.6-4
- rebuild with new openssl

* Tue Jan  6 2009 James Antill <james.antill@redhat.com> - 2.6-3
- Fix distutils generated rpms.
- Resolves: bug#236535

* Wed Dec 10 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.6-2
- Enable -lcrypt for cryptmodule

* Fri Nov 28 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.6-1
- Update to 2.6

* Tue Sep 30 2008 James Antill <james.antill@redhat.com> - 2.5.2-1
- Move to 2.5.2
- Fix CVE-2008-2316 hashlib overflow.

* Thu Jul 17 2008 Jeremy Katz <katzj@redhat.com> - 2.5.1-30
- Fix up the build for new rpm
- And actually build against db4-4.7 (#455170)

* Thu Jul 10 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.5.1-27
- fix license tag
- enable support for db4-4.7

* Sun Jun 15 2008 James Antill <jantill@redhat.com> - 2.5.1-26
- Fix sporadic listdir problem
- Resolves: bug#451494

* Mon Apr  7 2008 James Antill <jantill@redhat.com> - 2.5.1-25
- Rebuild to re-gen autoconf file due to glibc change.
- Resolves: bug#441003

* Tue Mar 25 2008 James Antill <jantill@redhat.com> - 2.5.1-24
- Add more constants to socketmodule

* Sat Mar  8 2008 James Antill <jantill@redhat.com> - 2.5.1-22
- Add constants to socketmodule
- Resolves: bug#436560

* Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 2.5.1-22
- Autorebuild for GCC 4.3

* Sun Jan 13 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.5.1-21
- rebuild for new tk in rawhide

* Mon Jan  7 2008 James Antill <jantill@redhat.com> - 2.5.1-20
- Add valgrind support files, as doc, to python-devel
- Relates: rhbz#418621
- Add new API from 2.6, set_wakeup_fd ... use at own risk, presumably won't
- change but I have no control to guarantee that.
- Resolves: rhbz#427794
- Add gdbinit support file, as doc, to python-devel

* Fri Jan  4 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.5.1-19
- rebuild for new tcl/tk in rawhide

* Fri Dec  7 2007 James Antill <jantill@redhat.com> - 2.5.1-18
- Create a python-test sub-module, over 3MB of stuff noone wants.
- Don't remove egginfo files, try this see what happens ... may revert.
- Resolves: rhbz#414711

* Mon Dec  3 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-17
- rebuild for new libssl

* Fri Nov 30 2007 James Antill <jantill@redhat.com> - 2.5.1-16
- Fix pyconfig.h comment typo.
- Add back test_support.py and the __init__.py file.
- Resolves: rhbz#387401

* Tue Oct 30 2007 James Antill <jantill@redhat.com> - 2.5.1-15
- Do codec lowercase in C Locale.
- Resolves: 207134 191096
- Fix stupid namespacing in pysqlite, minimal upgrade to 2.3.3 pysqlite
- Resolves: 263221

* Wed Oct 24 2007 James Antill <jantill@redhat.com> - 2.5.1-14
- Remove bintuils dep. for live CD ... add work around for ctypes

* Mon Oct 22 2007 James Antill <jantill@redhat.com> - 2.5.1-13
- Add tix buildprereq
- Add tkinter patch
- Resolves: #281751
- Fix ctypes loading of libraries, add requires on binutils
- Resolves: #307221
- Possible fix for CVE-2007-4965 possible exploitable integer overflow
- Resolves: #295971

* Tue Oct 16 2007 Mike Bonnet <mikeb@redhat.com> - 2.5.1-12
- fix marshalling of objects in xmlrpclib (python bug #1739842)

* Fri Sep 14 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-11
- fix encoding of sqlite .py files to work around weird encoding problem
  in Turkish (#283331)

* Mon Sep 10 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-10
- work around problems with multi-line plural specification (#252136)

* Tue Aug 28 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-9
- rebuild against new expat

* Tue Aug 14 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-8
- build against db4.6

* Tue Aug 14 2007 Dennis Gilmore <dennis@ausil.us> - 2.5.1-7
- add sparc64 to the list of archs for _pyconfig64_h

* Fri Aug 10 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-6
- fix ctypes again on some arches (Hans de Goede, #251637)

* Fri Jul  6 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-5
- link curses modules with ncursesw (#246385)

* Wed Jun 27 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-4
- fix _elementtree.so build (#245703)
- ensure that extension modules we expect are actually built rather than
  having them silently fall out of the package

* Tue Jun 26 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-3
- link with system expat (#245703)

* Thu Jun 21 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-2
- rebuild to take advantage of hardlinking between identical pyc/pyo files

* Thu May 31 2007 Jeremy Katz <katzj@redhat.com> - 2.5.1-1
- update to python 2.5.1

* Mon Mar 19 2007 Jeremy Katz <katzj@redhat.com> - 2.5.3-12
- fix alpha build (#231961)

* Tue Feb 13 2007 Jeremy Katz <katzj@redhat.com> - 2.5.3-11
- tcl/tk was reverted; rebuild again

* Thu Feb  1 2007 Jeremy Katz <katzj@redhat.com> - 2.5.3-10
- rebuild for new tcl/tk

* Tue Jan 16 2007 Miroslav Lichvar <mlichvar@redhat.com> - 2.5.3-9
- link with ncurses

* Sat Jan  6 2007 Jeremy Katz <katzj@redhat.com> - 2.5.3-8
- fix extensions to use shared libpython (#219564)
- all 64bit platforms need the regex fix (#122304)

* Wed Jan  3 2007 Jeremy Katz <katzj@redhat.com> - 2.5.3-7
- fix ctypes to not require execstack (#220669)

* Fri Dec 15 2006 Jeremy Katz <katzj@redhat.com> - 2.5.3-6
- don't link against compat-db (Robert Scheck)

* Wed Dec 13 2006 Jarod Wilson <jwilson@redhat.com> - 2.5.3-5
- fix invalid assert in debug mode (upstream changeset 52622)

* Tue Dec 12 2006 Jeremy Katz <katzj@redhat.com> - 2.5.3-4
- obsolete/provide python-ctypes (#219256)

* Mon Dec 11 2006 Jeremy Katz <katzj@redhat.com> - 2.5.3-3
- fix atexit traceback with failed syslog logger (#218214)
- split libpython into python-libs subpackage for multilib apps
  embedding python interpreters

* Wed Dec  6 2006 Jeremy Katz <katzj@redhat.com> - 2.5.3-2
- disable installation of .egg-info files for now

* Tue Dec  5 2006 Jeremy Katz <katzj@redhat.com>
- support db 4.5
- obsolete python-elementtree; since it requires some code tweaks, don't
  provide it
- obsolete old python-sqlite; provide the version that's actually included

* Mon Oct 30 2006 Jeremy Katz <katzj@redhat.com>
- fix _md5 and _sha modules (Robert Sheck)
- no longer provide optik compat; it's been a couple of years now
- no longer provide the old shm module; if this is still needed, let's
  build it separately
- no longer provide japanese codecs; should be a separate package

* Mon Oct 23 2006 Jeremy Katz <katzj@redhat.com> - 2.5-0
- update to 2.5.0 final

* Fri Aug 18 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.99.c1
- Updated to 2.5c1. Merged fixes from FC6 too:
- Fixed bug #199373 (on some platforms CFLAGS is needed when linking)
- Fixed bug #198971 (case conversion not locale safe in logging library)
- Verified bug #201434 (distutils.sysconfig is confused by the change to make
  python-devel multilib friendly) is fixed upstream

* Sun Jul 16 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.99.b2
- Updated to 2.5b2 (which for comparison reasons is re-labeled 2.4.99.b2)

* Fri Jun 23 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.99.b1
- Updated to 2.5b1 (which for comparison reasons is re-labeled 2.4.99.b1)

* Tue Jun 13 2006 Jeremy Katz <katzj@redhat.com> - 2.4.3-11.FC6
- and fix it for real

* Tue Jun 13 2006 Jeremy Katz <katzj@redhat.com> - 2.4.3-10.FC6
- fix python-devel on ia64

* Tue Jun 13 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-9
- Fixed python-devel to be multilib friendly (bug #192747, #139911)

* Tue Jun 13 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-8
- Only copying mkhowto from the Docs - we don't need perl dependencies from
  python-tools.

* Mon Jun 12 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-7
- Fixed bug #121198 (webbrowser.py should use the user's preferences first)

* Mon Jun 12 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-6
- Fixed bug #192592 (too aggressive assertion fails) - SF#1257960
- Fixed bug #167468 (Doc/tools not included) - added in the python-tools package

* Thu Jun  8 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-5
- Fixed bug #193484 (added pydoc in the main package)

* Mon Jun  5 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-4
- Added dist in the release

* Mon May 15 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-3
- rebuilt to fix broken libX11 dependency

* Wed Apr 12 2006 Jeremy Katz <katzj@redhat.com> - 2.4.3-2
- rebuild with new gcc to fix #188649

* Thu Apr  6 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-1
- Updated to 2.4.3

* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 2.4.2-3.2.1
- bump again for double-long bug on ppc(64)

* Fri Feb 10 2006 Mihai Ibanescu <misa@redhat.com> - 2.4.3-3.2
- rebuilt for newer tix

* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 2.4.2-3.1
- rebuilt for new gcc4.1 snapshot and glibc changes

* Fri Jan 20 2006 Mihai Ibanescu <misa@redhat.com> 2.4.2-3
- fixed #136654 for another instance of audiotest.au

* Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
- rebuilt

* Sat Nov 19 2005 Bill Nottingham <notting@redhat.com> 2.4.2-2
- fix build for modular X, remove X11R6 path references

* Tue Nov 15 2005 Mihai Ibanescu <misa@redhat.com> 2.4.2-1
- Upgraded to 2.4.2
- BuildRequires autoconf

* Wed Nov  9 2005 Mihai Ibanescu <misa@redhat.com> 2.4.1-16
- Rebuilding against newer openssl.
- XFree86-devel no longer exists

* Mon Sep 26 2005 Peter Jones <pjones@redhat.com> 2.4.1-14
- Once more -- this time, to fix -EPERM when you run it in a directory
  you can't read from.

* Mon Sep 26 2005 Peter Jones <pjones@redhat.com> 2.4.1-13
- So, 5 or 6 people have said it works for them with this patch...

* Sun Sep 25 2005 Peter Jones <pjones@redhat.com> 2.4.1-12
- Fixed bug #169159 (check for argc>0 and argv[0] == NULL, not just
    argv[0][0]='\0')
  Reworked the patch from -8 a bit more.

* Fri Sep 23 2005 Mihai Ibanescu <misa@redhat.com> 2.4.1-10
- Fixed bug #169159 (don't let python core dump if no arguments are passed in)
  Reworked the patch from -8 a bit more.

* Thu Sep 22 2005 Peter Jones <pjones@redhat.com> 2.4.1-8
- Fix bug #169046 more correctly.

* Thu Sep 22 2005 Mihai Ibanescu <misa@redhat.com> 2.4.1-7
- Fixed bug #169046 (realpath is unsafe); thanks to
  Peter Jones <pjones@redhat.com> and Arjan van de Ven <arjanv@redhat.com> for
  diagnosing and the patch.

* Tue Sep 20 2005 Mihai Ibanescu <misa@redhat.com> 2.4.1-4
- Fixed bug #168655 (fixes for building as python24)

* Tue Jul 26 2005 Mihai Ibanescu <misa@redhat.com> 2.4.1-3
- Fixed bug #163435 (pynche doesn't start))

* Wed Apr 20 2005 Mihai Ibanescu <misa@redhat.com> 2.4.1-2
- Fixed bug #143667 (python should own /usr/lib/python* on 64-bit systems, for
  noarch packages)
- Fixed bug #143419 (BuildRequires db4 is not versioned)

* Wed Apr  6 2005 Mihai Ibanescu <misa@redhat.com> 2.4.1-1
- updated to 2.4.1

* Mon Mar 14 2005 Mihai Ibanescu <misa@redhat.com> 2.4-6
- building the docs from a different source rpm, to decouple bootstrapping
  python from having tetex installed

* Fri Mar 11 2005 Dan Williams <dcbw@redhat.com> 2.4-5
- Rebuild to pick up new libssl.so.5

* Wed Feb  2 2005 Mihai Ibanescu <misa@redhat.com> 2.4-4
- Fixed security issue in SimpleXMLRPCServer.py (#146647)

* Wed Jan 12 2005 Tim Waugh <twaugh@redhat.com> 2.4-3
- Rebuilt for new readline.

* Mon Dec  6 2004 Jeff Johnson <jbj@jbj.org> 2.4-2
- db-4.3.21 returns DB_BUFFER_SMALL rather than ENOMEM (#141994).
- add Provide: python(abi) = 2.4
- include msgfmt/pygettext *.pyc and *.pyo from brp-python-bytecompile.

* Fri Dec  3 2004 Mihai Ibanescu <misa@redhat.com> 2.4-1
- Python-2.4.tar.bz2 (final)

* Fri Nov 19 2004 Mihai Ibanescu <misa@redhat.com> 2.4-0.c1.1
- Python-2.4c1.tar.bz2 (release candidate 1)

* Thu Nov 11 2004 Jeff Johnson <jbj@jbj.org> 2.4-0.b2.4
- rebuild against db-4.3.21.

* Mon Nov  8 2004 Jeremy Katz <katzj@redhat.com> - 2.4-0.b2.3
- fix the lib64 patch so that 64bit arches still look in /usr/lib/python...

* Mon Nov  8 2004 Jeremy Katz <katzj@redhat.com> - 2.4-0.b2.2
- cryptmodule still needs -lcrypt (again)

* Thu Nov  4 2004 Mihai Ibanescu <misa@redhat.com> 2.4-0.b2.1
- Updated to python 2.4b2 (and labeled it 2.4-0.b2.1 to avoid breaking rpm's
  version comparison)

* Thu Nov  4 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-13
- Fixed bug #138112 (python overflows stack buffer) - SF bug 105470

* Tue Nov  2 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-12
- Fixed bugs #131439 #136023 #137863 (.pyc/.pyo files had the buildroot added)

* Tue Oct 26 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-11
- Fixed bug #136654 (python has sketchy audio clip)

* Tue Aug 31 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-10
- Fixed bug #77418 (Demo dir not packaged)
- More tweaking on #19347 (Moved Tools/ under /usr/lib/python2.3/Tools)

* Fri Aug 13 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-8
- Fixed bug #129769: Makefile in new python conflicts with older version found
  in old python-devel
- Reorganized the spec file to get rid of the aspython2 define; __python_ver
  is more powerful.

* Tue Aug  3 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-7
- Including html documentation for non-i386 arches
- Fixed #125362 (python-doc html files have japanese character encoding)
- Fixed #128923 (missing dependency between python and python-devel)

* Fri Jul 30 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-6
- Fixed #128030 (help() not printing anything)
- Fixed #125472 (distutils.sysconfig.get_python_lib() not returning the right
  path on 64-bit systems)
- Fixed #127357 (building python as a shared library)
- Fixed  #19347 (including the contents of Tools/scripts/ in python-tools)

* Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
- rebuilt

* Tue Jun  8 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-3
- Added an optik.py that provides the same interface from optparse for
  backward compatibility; obsoleting python-optik

* Mon Jun  7 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-2
- Patched bdist_rpm to allow for builds of multiple binary rpms (bug #123598)

* Fri Jun  4 2004 Mihai Ibanescu <misa@redhat.com> 2.3.4-1
- Updated to 2.3.4-1 with Robert Scheck's help (bug #124764)
- Added BuildRequires: tix-devel (bug #124918)

* Fri May  7 2004 Mihai Ibanescu <misa@redhat.com> 2.3.3-6
- Correct fix for #122304 from upstream:
  http://sourceforge.net/tracker/?func=detail&atid=105470&aid=931848&group_id=5470

* Thu May  6 2004 Mihai Ibanescu <misa@redhat.com> 2.3.3-4
- Fix for bug #122304 : splitting the domain name fails on 64-bit arches
- Fix for bug #120879 : including Makefile into the main package

- Requires XFree86-devel instead of -libs (see bug #118442)

* Tue Mar 16 2004 Mihai Ibanescu <misa@redhat.com> 2.3.3-3
- Requires XFree86-devel instead of -libs (see bug #118442)

* Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com>
- rebuilt

* Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
- rebuilt

* Fri Dec 19 2003 Jeff Johnson <jbj@jbj.org> 2.3.3-1
- upgrade to 2.3.3.

* Sat Dec 13 2003 Jeff Johnson <jbj@jbj.org> 2.3.2-9
- rebuild against db-4.2.52.

* Fri Dec 12 2003 Jeremy Katz <katzj@redhat.com> 2.3.2-8
- more rebuilding for new tcl/tk

* Wed Dec  3 2003 Jeff Johnson <jbj@jbj.org> 2.3.2-7.1
- rebuild against db-4.2.42.

* Fri Nov 28 2003 Mihai Ibanescu <misa@redhat.com> 2.3.2-7
- rebuilt against newer tcl/tk

* Mon Nov 24 2003 Mihai Ibanescu <misa@redhat.com> 2.3.2-6
- added a Provides: python-abi

* Wed Nov 12 2003 Mihai Ibanescu <misa@redhat.com> 2.3.2-5
- force CC (#109268)

* Sun Nov  9 2003 Jeremy Katz <katzj@redhat.com> 2.3.2-4
- cryptmodule still needs -lcrypt

* Wed Nov  5 2003 Mihai Ibanescu <misa@redhat.com> 2.3.2-2
- Added patch for missing mkhowto

* Thu Oct 16 2003 Mihai Ibanescu <misa@redhat.com> 2.3.2-1
- Updated to 2.3.2

* Thu Sep 25 2003 Mihai Ibanescu <misa@redhat.com> 2.3.1-1
- 2.3.1 final

* Tue Sep 23 2003 Mihai Ibanescu <misa@redhat.com> 2.3.1-0.8.RC1
- Building the python 2.3.1 release candidate
- Updated the lib64 patch

* Wed Jul 30 2003 Mihai Ibanescu <misa@redhat.com> 2.3-0.2
- Building python 2.3
- Added more BuildRequires
- Updated the startup files for modulator and pynche; idle installs its own
  now.

* Thu Jul  3 2003 Mihai Ibanescu <misa@redhat.com> 2.2.3-4
- Rebuilt against newer db4 packages (bug #98539)

* Mon Jun 9 2003 Elliot Lee <sopwith@redhat.com> 2.2.3-3
- rebuilt

* Sat Jun  7 2003 Mihai Ibanescu <misa@redhat.com> 2.2.3-2
- Rebuilt

* Fri Jun  6 2003 Mihai Ibanescu <misa@redhat.com> 2.2.3-1
- Upgraded to 2.2.3

* Wed Apr  2 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-28
- Rebuilt

* Wed Apr  2 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-27
- Modified the ftpuri patch conforming to http://ietf.org/rfc/rfc1738.txt

* Mon Feb 24 2003 Elliot Lee <sopwith@redhat.com>
- rebuilt

* Mon Feb 24 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-25
- Fixed bug #84886: pydoc dies when run w/o arguments
- Fixed bug #84205: add python shm module back (used to be shipped with 1.5.2)
- Fixed bug #84966: path in byte-compiled code still wrong

* Thu Feb 20 2003 Jeremy Katz <katzj@redhat.com> 2.2.2-23
- ftp uri's should be able to specify being rooted at the root instead of
  where you login via ftp (#84692)

* Mon Feb 10 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-22
- Using newer Japanese codecs (1.4.9). Thanks to
  Peter Bowen <pzb@datastacks.com> for pointing this out.

* Thu Feb  6 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-21
- Rebuild

* Wed Feb  5 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-20
- Release number bumped really high: turning on UCS4 (ABI compatibility
  breakage)

* Fri Jan 31 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-13
- Attempt to look both in /usr/lib64 and /usr/lib/python2.2/site-packages/:
  some work on python-2.2.2-lib64.patch

* Thu Jan 30 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-12
- Rebuild to incorporate the removal of .lib64 and - files.

* Thu Jan 30 2003 Mihai Ibanescu <misa@redhat.com> 2.2.2-11.7.3
- Fixed bug #82544: Errata removes most tools
- Fixed bug #82435: Python 2.2.2 errata breaks redhat-config-users
- Removed .lib64 and - files that get installed after we fix the multilib
  .py files.

* Wed Jan 22 2003 Tim Powers <timp@redhat.com>
- rebuilt

* Wed Jan 15 2003 Jens Petersen <petersen@redhat.com> 2.2.2-10
- rebuild to update tkinter's tcltk deps
- convert changelog to utf-8

* Tue Jan  7 2003 Nalin Dahyabhai <nalin@redhat.com> 2.2.2-9
- rebuild

* Fri Jan  3 2003 Nalin Dahyabhai <nalin@redhat.com>
- pick up OpenSSL cflags and ldflags from pkgconfig if available

* Thu Jan  2 2003 Jeremy Katz <katzj@redhat.com> 2.2.2-8
- urllib2 didn't support non-anonymous ftp.  add support based on how
  urllib did it (#80676, #78168)

* Mon Dec 16 2002 Mihai Ibanescu <misa@redhat.com> 2.2.2-7
- Fix bug #79647 (Rebuild of SRPM fails if python isn't installed)
- Added a bunch of missing BuildRequires found while fixing the
  above-mentioned bug

* Tue Dec 10 2002 Tim Powers <timp@redhat.com> 2.2.2-6
- rebuild to fix broken tcltk deps for tkinter

* Fri Nov 22 2002 Mihai Ibanescu <misa@redhat.com>
2.2.2-3.7.3
- Recompiled for 7.3 (to fix the -lcrypt bug)
- Fix for the spurious error message at the end of the build (build-requires
  gets confused by executable files starting with """"): make the tests
  non-executable.

* Wed Nov 20 2002 Mihai Ibanescu <misa@redhat.com>
2.2.2-5
- Fixed configuration patch to add -lcrypt when compiling cryptmodule.c

2.2.2-4
- Spec file change from Matt Wilson <msw@redhat.com> to disable linking
  with the C++ compiler.

* Mon Nov 11 2002 Mihai Ibanescu <misa@redhat.com>
2.2.2-3.*
- Merged patch from Karsten Hopp <karsten@redhat.de> from 2.2.1-17hammer to
  use %%{_libdir}
- Added XFree86-libs as BuildRequires (because of tkinter)
- Fixed duplicate listing of plat-linux2
- Fixed exclusion of lib-dynload/japanese
- Added lib64 patch for the japanese codecs
- Use setup magic instead of using tar directly on JapaneseCodecs

* Tue Nov  5 2002 Mihai Ibanescu <misa@redhat.com>
2.2.2-2
- Fix #76912 (python-tools contains idle, which uses tkinter, but there is no
  requirement of tkinter from python-tools).
- Fix #74013 (rpm is missing the /usr/lib/python2.2/test directory)

* Mon Nov  4 2002 Mihai Ibanescu <misa@redhat.com>
- builds as python2 require a different libdb
- changed the buildroot name of python to match python2 builds

* Fri Nov  1 2002 Mihai Ibanescu <misa@redhat.com>
- updated python to 2.2.2 and adjusted the patches accordingly

* Mon Oct 21 2002 Mihai Ibanescu <misa@redhat.com>
- Fix #53930 (Python-2.2.1-buildroot-bytecode.patch)
- Added BuildPrereq dependency on gcc-c++

* Fri Aug 30 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-17
- security fix for _execvpe

* Tue Aug 13 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-16
- Fix  #71011,#71134, #58157

* Wed Aug  7 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-15
- Resurrect tkinter
- Fix for distutils (#67671)
- Fix #69962

* Thu Jul 25 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-14
- Obsolete tkinter/tkinter2 (#69838)

* Tue Jul 23 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-13
- Doc fixes (#53951) - not on alpha at the momemt

* Mon Jul  8 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-12
- fix pydoc (#68082)

* Mon Jul  8 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-11
- Add db4-devel as a BuildPrereq

* Fri Jun 21 2002 Tim Powers <timp@redhat.com> 2.2.1-10
- automated rebuild

* Mon Jun 17 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-9
- Add Japanese codecs (#66352)

* Tue Jun 11 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-8
- No more tkinter...

* Wed May 29 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-7
- Rebuild

* Tue May 21 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-6
- Add the email subcomponent (#65301)

* Fri May 10 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-5
- Rebuild

* Thu May 02 2002 Than Ngo <than@redhat.com> 2.2.1-4
- rebuild i new enviroment

* Tue Apr 23 2002 Trond Eivind Glomsrød <teg@redhat.com>
- Use ucs2, not ucs4, to avoid breaking tkinter (#63965)

* Mon Apr 22 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-2
- Make it use db4

* Fri Apr 12 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2.1-1
- 2.2.1 - a bugfix-only release

* Fri Apr 12 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-16
- the same, but in builddirs - this will remove them from the
  docs package, which doesn't look in the buildroot for files.

* Fri Apr 12 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-15
- Get rid of temporary files and .cvsignores included
  in the tarball and make install

* Fri Apr  5 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-14
- Don't own lib-tk in main package, only in tkinter (#62753)

* Mon Mar 25 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-13
- rebuild

* Mon Mar 25 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-12
- rebuild

* Fri Mar  1 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-11
- Add a not to the Distutils obsoletes test (doh!)

* Fri Mar  1 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-10
- Rebuild

* Mon Feb 25 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-9
- Only obsolete Distutils when built as python

* Thu Feb 21 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-8
- Make files in /usr/bin install side by side with python 1.5 when
- Drop explicit requirement of db4
  built as python2

* Thu Jan 31 2002 Elliot Lee <sopwith@redhat.com> 2.2-7
- Use version and pybasever macros to make updating easy
- Use _smp_mflags macro

* Tue Jan 29 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-6
- Add db4-devel to BuildPrereq

* Fri Jan 25 2002 Nalin Dahyabhai <nalin@redhat.com> 2.2-5
- disable ndbm support, which is db2 in disguise (really interesting things
  can happen when you mix db2 and db4 in a single application)

* Thu Jan 24 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-4
- Obsolete subpackages if necesarry
- provide versioned python2
- build with db4

* Wed Jan 16 2002 Trond Eivind Glomsrød <teg@redhat.com> 2.2-3
- Alpha toolchain broken. Disable build on alpha.
- New openssl

* Wed Dec 26 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-1
- 2.2 final

* Fri Dec 14 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.11c1
- 2.2 RC 1
- Don't include the _tkinter module in the main package - it's
  already in the tkiter packace
- Turn off the mpzmodule, something broke in the buildroot

* Wed Nov 28 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.10b2
- Use -fPIC for OPT as well, in lack of a proper libpython.so

* Mon Nov 26 2001 Matt Wilson <msw@redhat.com> 2.2-0.9b2
- changed DESTDIR to point to / so that distutils will install dynload
  modules properly in the installroot

* Fri Nov 16 2001 Matt Wilson <msw@redhat.com> 2.2-0.8b2
- 2.2b2

* Fri Oct 26 2001 Matt Wilson <msw@redhat.com> 2.2-0.7b1
- python2ify

* Fri Oct 19 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.5b1
- 2.2b1

* Sun Sep 30 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.4a4
- 2.2a4
- Enable UCS4 support
- Enable IPv6
- Provide distutils
- Include msgfmt.py and pygettext.py

* Fri Sep 14 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.3a3
- Obsolete Distutils, which is now part of the main package
- Obsolete python2

* Thu Sep 13 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.2a3
- Add docs, tools and tkinter subpackages, to match the 1.5 layout

* Wed Sep 12 2001 Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.1a3
- 2.2a3
- don't build tix and blt extensions

* Mon Aug 13 2001 Trond Eivind Glomsrød <teg@redhat.com>
- Add tk and tix to build dependencies

* Sat Jul 21 2001 Trond Eivind Glomsrød <teg@redhat.com>
- 2.1.1 bugfix release - with a GPL compatible license

* Fri Jul 20 2001 Trond Eivind Glomsrød <teg@redhat.com>
- Add new build dependencies (#49753)

* Tue Jun 26 2001 Nalin Dahyabhai <nalin@redhat.com>
- build with -fPIC

* Fri Jun  1 2001 Trond Eivind Glomsrød <teg@redhat.com>
- 2.1
- reorganization of file includes

* Wed Dec 20 2000 Trond Eivind Glomsrød <teg@redhat.com>
- fix the "requires" clause, it lacked a space causing problems
- use %%{_tmppath}
- don't define name, version etc
- add the available patches from the Python home page

* Fri Dec 15 2000 Matt Wilson <msw@redhat.com>
- added devel subpackage

* Fri Dec 15 2000 Matt Wilson <msw@redhat.com>
- modify all files to use "python2.0" as the intrepter
- don't build the Expat bindings
- build against db1

* Mon Oct 16 2000 Jeremy Hylton <jeremy@beopen.com>
- updated for 2.0 final

* Mon Oct  9 2000 Jeremy Hylton <jeremy@beopen.com>
- updated for 2.0c1
- build audioop, imageop, and rgbimg extension modules
- include xml.parsers subpackage
- add test.xml.out to files list

* Thu Oct  5 2000 Jeremy Hylton <jeremy@beopen.com>
- added bin/python2.0 to files list (suggested by Martin v. L?)

* Tue Sep 26 2000 Jeremy Hylton <jeremy@beopen.com>
- updated for release 1 of 2.0b2
- use .bz2 version of Python source

* Tue Sep 12 2000 Jeremy Hylton <jeremy@beopen.com>
- Version 2 of 2.0b1
- Make the package relocatable.  Thanks to Suchandra Thapa.
- Exclude Tkinter from main RPM.  If it is in a separate RPM, it is
  easier to track Tk releases.