%global srcname paramiko
Name: python-%{srcname}
Version: 3.4.0
Release: 2%{?dist}
Summary: SSH2 protocol library for python
# No version specified
License: LGPL-2.1-or-later
URL: https://github.com/paramiko/paramiko
Source0: %{url}/archive/%{version}/%{srcname}-%{version}.tar.gz
# Remove pytest-relaxed, which depends on pytest4
# Can be removed when https://github.com/paramiko/paramiko/pull/1665/ is released
Patch3: 0003-remove-pytest-relaxed-dep.patch
# icecream not packaged in Fedora, nor needed for regular builds
Patch4: 0004-remove-icecream-dep.patch
# Avoid use of lexicon via invoke since we're avoiding invoke as a dependency;
# instead, use lexicon directly
Patch5: 0005-remove-invoke-dep.patch
BuildArch: noarch
%global paramiko_desc \
Paramiko (a combination of the Esperanto words for "paranoid" and "friend") is\
a module for python 2.3 or greater that implements the SSH2 protocol for secure\
(encrypted and authenticated) connections to remote machines. Unlike SSL (aka\
TLS), the SSH2 protocol does not require hierarchical certificates signed by a\
powerful central authority. You may know SSH2 as the protocol that replaced\
telnet and rsh for secure access to remote shells, but the protocol also\
includes the ability to open arbitrary channels to remote services across an\
encrypted tunnel (this is how sftp works, for example).
%description
%{paramiko_desc}
%package -n python%{python3_pkgversion}-%{srcname}
Summary: SSH2 protocol library for python
BuildRequires: python%{python3_pkgversion}-devel >= 3.6
BuildRequires: %{py3_dist bcrypt} >= 3.2
BuildRequires: %{py3_dist cryptography} >= 3.3
BuildRequires: %{py3_dist lexicon} >= 2.0.1
BuildRequires: %{py3_dist pyasn1} >= 0.1.7
BuildRequires: %{py3_dist pynacl} >= 1.5
BuildRequires: %{py3_dist pytest}
BuildRequires: %{py3_dist setuptools}
Recommends: %{py3_dist pyasn1} >= 0.1.7
%description -n python%{python3_pkgversion}-%{srcname}
%{paramiko_desc}
Python 3 version.
%package doc
Summary: Docs and demo for SSH2 protocol library for python
BuildRequires: /usr/bin/sphinx-build
Requires: %{name} = %{version}-%{release}
%description doc
%{paramiko_desc}
This is the documentation and demos.
%prep
%autosetup -p1 -n %{srcname}-%{version}
chmod -c a-x demos/*
sed -i -e '/^#!/,1d' demos/*
%build
%py3_build
%install
%py3_install
sphinx-build -b html sites/docs/ html/
rm html/.buildinfo
%check
PYTHONPATH=%{buildroot}%{python3_sitelib} pytest-%{python3_version}
%files -n python%{python3_pkgversion}-%{srcname}
%license LICENSE
%doc README.rst
%{python3_sitelib}/%{srcname}-*.egg-info/
%{python3_sitelib}/%{srcname}/
%files doc
%doc html/ demos/
%changelog
* Mon Jan 22 2024 Fedora Release Engineering <releng@fedoraproject.org> - 3.4.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Tue Dec 19 2023 Gwyn Ciesla <gwync@protonmail.com> - 3.4.0-1
- 3.4.0
- 'Transport' grew a new 'packetizer_class' kwarg for overriding the
packet-handler class used internally (mostly for testing, but advanced
users may find this useful when doing deep hacks)
- Address CVE 2023-48795 (https://terrapin-attack.com/) a.k.a. the "Terrapin
Attack", a vulnerability found in the SSH protocol re: treatment of packet
sequence numbers) as follows:
- The vulnerability only impacts encrypt-then-MAC digest algorithms in
tandem with CBC ciphers, and ChaCha20-poly1305; of these, Paramiko
currently only implements 'hmac-sha2-(256|512)-etm' in tandem with
'AES-CBC'; if you are unable to upgrade to Paramiko versions containing
the below fixes right away, you may instead use the 'disabled_algorithms'
connection option to disable the ETM MACs and/or the CBC ciphers (this
option is present in Paramiko ≥ 2.6)
- As the fix for the vulnerability requires both ends of the connection to
cooperate, the below changes will only take effect when the remote end is
OpenSSH ≥ 9.6 (or equivalent, such as Paramiko in server mode, as of this
patch version) and configured to use the new "strict kex" mode (Paramiko
will always attempt to use "strict kex" mode if offered by the server,
unless you override this by specifying 'strict_kex=False' in
'Transport.__init__')
- Paramiko will now raise an 'SSHException' subclass ('MessageOrderError')
when protocol messages are received in unexpected order; this includes
situations like receiving 'MSG_DEBUG' or 'MSG_IGNORE' during initial key
exchange, which are no longer allowed during strict mode
- Key (re)negotiation -- i.e. 'MSG_NEWKEYS', whenever it is encountered --
now resets packet sequence numbers (this should be invisible to users
during normal operation, only causing exceptions if the exploit is
encountered, which will usually result in, again, 'MessageOrderError')
- Sequence number rollover will now raise 'SSHException' if it occurs
during initial key exchange (regardless of strict mode status)
- Tweak 'ext-info-(c|s)' detection during KEXINIT protocol phase; the
original implementation made assumptions based on an OpenSSH implementation
detail
* Sun Jul 30 2023 Paul Howarth <paul@city-fan.org> - 3.3.1-1
- Update to 3.3.1 (rhbz#2227478)
- Cleaned up some very old root level files, mostly just to exercise some of
our doc build and release machinery
* Fri Jul 28 2023 Gwyn Ciesla <gwync@protonmail.com> - 3.3.0-1
- 3.3.0
- Add support and tests for 'Match final ..' (frequently used in ProxyJump
configurations to exclude the jump host) to our SSH config parser (GH#1907,
GH#1992)
- Add an explicit 'max_concurrent_prefetch_requests' argument to
'paramiko.client.SSHClient.get' and 'paramiko.client.SSHClient.getfo',
allowing users to limit the number of concurrent requests used during
prefetch (GH#1587, GH#2058)
* Fri Jul 21 2023 Fedora Release Engineering <releng@fedoraproject.org> - 3.2.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
* Thu Jun 15 2023 Python Maint <python-maint@redhat.com> - 3.2.0-2
- Rebuilt for Python 3.12
* Sat May 27 2023 Paul Howarth <paul@city-fan.org> - 3.2.0-1
- Update to 3.2.0 (rhbz#2210398)
- Fixed a very sneaky bug found at the apparently rarely-traveled
intersection of RSA-SHA2 keys, certificates, SSH agents, and
stricter-than-OpenSSH server targets, which manifested as yet another
"well, if we turn off SHA2 at one end or another, everything works again"
problem, for example with version 12 of the Teleport server endpoint
- The 'server-sig-algs' and 'RSA-SHA2' features added around Paramiko 2.9 or
so, had the annoying side effect of not working with servers that don't
support *either* of those feature sets, requiring use of
'disabled_algorithms' to forcibly disable the SHA2 algorithms on Paramiko's
end (GH#1961, GH#2012 and countless others)
- The *experimental* '~paramiko.transport.ServiceRequestingTransport' (noted
in its own entry in this changelog) includes a fix for this issue,
specifically by falling back to the same algorithm as the in-use pubkey if
it's in the algorithm list (leaving the "first algorithm in said list" as
an absolute final fallback)
- Implement '_fields()' on '~paramiko.agent.AgentKey' so that it may be
compared (via '==') with other '~paramiko.pkey.PKey' instances
- Since its inception, Paramiko has (for reasons lost to time) implemented
authentication as a side effect of handling affirmative replies to
'MSG_SERVICE_REQUEST' protocol messages; what this means is Paramiko makes
one such request before every 'MSG_USERAUTH_REQUEST', i.e. every auth
attempt (GH#23)
- OpenSSH doesn't care if clients send multiple service requests, but other
server implementations are often stricter in what they accept after an
initial service request (due to the RFCs not being clear), which can
result in odd behavior when a user doesn't authenticate successfully on
the very first try (for example, when the right key for a target host is
the third in one's ssh-agent)
- This version of Paramiko now contains an opt-in
'~paramiko.transport.Transport' subclass,
'~paramiko.transport.ServiceRequestingTransport', which more-correctly
implements service request handling in the Transport, and uses an
auth-handler subclass internally that has been similarly adapted; users
wanting to try this new experimental code path may hand this class to
'SSHClient.connect` as its 'transport_factory' kwarg
- This feature is *EXPERIMENTAL* and its code may be subject to change
- Minor backwards incompatible changes exist in the new code paths, most
notably the removal of the (inconsistently applied and rarely used)
'event' arguments to the 'auth_xxx' methods
- GSSAPI support has only been partially implemented, and is untested
- Some minor backwards-*compatible* changes were made to the *existing*
Transport and AuthHandler classes to facilitate the new code; for
example, 'Transport._handler_table' and
'AuthHandler._client_handler_table' are now properties instead of raw
attributes
- Users of '~paramiko.client.SSHClient' can now configure the authentication
logic Paramiko uses when connecting to servers; this functionality is
intended for advanced users and higher-level libraries such as 'Fabric'
(https://fabfile.org/); see '~paramiko.auth_strategy' for details (GH#387)
- Fabric's co-temporal release includes a proof-of-concept use of this
feature, implementing an auth flow much closer to that of the OpenSSH
client (versus Paramiko's legacy behavior); it is *strongly recommended*
that if this interests you, investigate replacing any direct use of
'SSHClient' with Fabric's 'Connection'
- This feature is **EXPERIMENTAL**; please see its docs for details
- Enhanced '~paramiko.agent.AgentKey' with new attributes, such as:
- Added a 'comment' attribute (and constructor argument);
'Agent.get_keys()' now uses this kwarg to store any comment field sent
over by the agent; the original version of the agent feature inexplicably
did not store the comment anywhere
- Agent-derived keys now attempt to instantiate a copy of the appropriate
key class for access to other algorithm-specific members (e.g. key size);
this is available as the '.inner_key' attribute
- This functionality is now in use in Fabric's new '--list-agent-keys'
feature, as well as in Paramiko's debug logging
- '~paramiko.pkey.PKey' now offers convenience "meta-constructors", static
methods that simplify the process of instantiating the correct subclass for
a given key input
- For example, 'PKey.from_path' can load a file path without knowing
*a priori* what type of key it is (thanks to some handy methods within
our cryptography dependency); going forwards, we expect this to be the
primary method of loading keys by user code that runs on "human time"
(i.e. where some minor efficiencies are worth the convenience)
- In addition, 'PKey.from_type_string' now exists, and is being used in
some internals to load ssh-agent keys
- As part of these changes, '~paramiko.pkey.PKey' and friends grew a
'~paramiko.pkey.PKey.identifiers' classmethod; this is inspired by the
'~paramiko.ecdsakey.ECDSAKey.supported_key_format_identifiers' classmethod
(which now refers to the new method); this also includes adding a '.name'
attribute to most key classes (which will eventually replace
'.get_name()')
- '~paramiko.pkey.PKey' grew a new '.algorithm_name' property that displays
the key algorithm; this is typically derived from the value of
'~paramiko.pkey.PKey.get_name'; for example, ED25519 keys have a 'get_name'
of 'ssh-ed25519' (the SSH protocol key type field value), and now have a
'algorithm_name' of 'ED25519'
- '~paramiko.pkey.PKey' grew a new '.fingerprint' property that emits a
fingerprint string matching the SHA256+Base64 values printed by various
OpenSSH tooling (e.g. 'ssh-add -l', 'ssh -v'); this is intended to help
troubleshoot Paramiko-vs-OpenSSH behavior and will eventually replace the
venerable 'get_fingerprint' method
- '~paramiko.agent.AgentKey' had a dangling Python 3 incompatible '__str__'
method returning bytes; this method has been removed, allowing the
superclass' ('~paramiko.pkey.PKey') method to run instead
* Sun Mar 12 2023 Paul Howarth <paul@city-fan.org> - 3.1.0-1
- Update to 3.1.0 (rhbz#2177436)
- Add an explicit 'channel_timeout' keyword argument to
'paramiko.client.SSHClient.connect', allowing users to configure the
previously-hardcoded default value of 3600 seconds (GH#2009, GH#2013, and
others)
- Accept single tabs as field separators (in addition to single spaces) in
'paramiko.hostkeys.HostKeyEntry.from_line' for parity with OpenSSH's
KnownHosts parser (GH#2173)
- Apply 'codespell' to the codebase, which found a lot of very old minor
spelling mistakes in docstrings; also, modernize many instances of '*largs'
vs. '*args' and '**kwarg' vs. '**kwargs' (GH#2178)
* Sun Jan 22 2023 Paul Howarth <paul@city-fan.org> - 3.0.0-1
- Update to 3.0.0 (rhbz#2162914)
- Remove some unnecessary '__repr__' calls when handling bytes-vs-str
conversions; this was apparently doing a lot of unintentional data
processing, which adds up in some use cases, such as SFTP transfers,
which may now be significantly faster (GH#2110)
- Streamline some redundant (and costly) byte conversion calls in the
packetizer and the core SFTP module; this should lead to some SFTP
speedups at the very least (GH#2165)
- 'paramiko.util.retry_on_signal' (and any internal uses of same, and also
any internal retries of 'EINTR' on e.g. socket operations) has been
removed; as of Python 3.5, per PEP 475 (https://peps.python.org/pep-0475/),
this functionality (and retrying 'EINTR' generally) is now part of the
standard library
Note: This change is backwards incompatible if you were explicitly
importing/using this particular function; the observable behavior otherwise
should not be changing
- '~paramiko.config.SSHConfig' used to straight-up delete the 'proxycommand'
key from config lookup results when the source config said
'ProxyCommand none'; this has been altered to preserve the key and give it
the Python value 'None', thus making the Python representation more in line
with the source config file
Note: This change is backwards incompatible if you were relying on the old
(1.x, 2.x) behavior for some reason (e.g. assuming all 'proxycommand'
values were valid subcommand strings)
- The behavior of private key classes' (i.e. anything inheriting from
'~paramiko.pkey.PKey') private key writing methods used to perform a
manual, extra 'chmod' call after writing; this hasn't been strictly
necessary since the mid 2.x release line (when key writing started giving
the 'mode' argument to 'os.open'), and has now been removed entirely; this
should only be observable if you were mocking Paramiko's system calls
during your own testing, or similar
- 'PKey.__cmp__' has been removed - ordering-oriented comparison of key files
is unlikely to have ever made sense (the old implementation attempted to
order by the hashes of the key material) and so we have not bothered
setting up '__lt__' and friends at this time; the class continues to have
its original '__eq__' untouched
Note: This change is backwards incompatible if you were actually trying to
sort public key objects (directly or indirectly); please file bug reports
detailing your use case if you have some intractable need for this
behavior, and we'll consider adding back the necessary Python 3 magic
methods so that it works as before
- A handful of lower-level classes (notably 'paramiko.message.Message' and
'paramiko.pkey.PKey') previously returned 'bytes' objects from their
implementation of '__str__', even under Python 3; and there was never any
'__bytes__' method; these issues have been fixed by renaming '__str__' to
'__bytes__' and relying on Python's default "stringification returns the
output of '__repr__'" behavior re: any real attempts to 'str()' such objects
- 'paramiko.common.asbytes' has been moved to 'paramiko.util.asbytes'
Note: This change is backwards incompatible if you were directly using this
function (which is unlikely)
- Remove the now irrelevant 'paramiko.py3compat' module
Note: This change is backwards incompatible - such references should be
search-and-replaced with their modern Python 3.6+ equivalents; in some
cases, still-useful methods or values have been moved to 'paramiko.util'
(most) or 'paramiko.common' ('byte_*')
- Drop support for Python versions less than 3.6, including Python 2; so long
and thanks for all the fish! Our packaging metadata has been updated to
include 'python_requires', so this should not cause breakage unless you're
on an old installation method that can't read this metadata
Note: As part of this change, our dependencies have been updated; e.g. we
now require Cryptography>=3.3, up from 2.5
* Fri Jan 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.12.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
* Sun Nov 6 2022 Paul Howarth <paul@city-fan.org> - 2.12.0-1
- Update to 2.12.0 (rhbz#2140281)
- Add a 'transport_factory' kwarg to 'SSHClient.connect' for advanced users
to gain more control over early Transport setup and manipulation (GH#2054,
GH#2125)
- Update '~paramiko.client.SSHClient' so it explicitly closes its wrapped
socket object upon encountering socket errors at connection time; this
should help somewhat with certain classes of memory leaks, resource
warnings, and/or errors (though we hasten to remind everyone that Client
and Transport have their own '.close()' methods for use in non-error
situations!) (GH#1822)
- Raise '~paramiko.ssh_exception.SSHException' explicitly when blank private
key data is loaded, instead of the natural result of 'IndexError'; this
should help more bits of Paramiko or Paramiko-adjacent codebases to
correctly handle this class of error (GH#1599, GH#1637)
- Use SPDX-format license tag
* Fri Jul 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.11.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
* Tue Jun 14 2022 Python Maint <python-maint@redhat.com> - 2.11.0-2
- Rebuilt for Python 3.11
* Tue May 17 2022 Paul Howarth <paul@city-fan.org> - 2.11.0-1
- Update to 2.11.0
- Align signature verification algorithm with OpenSSH re: zero-padding
signatures that don't match their nominal size/length; this shouldn't
affect most users, but will help Paramiko-implemented SSH servers handle
poorly behaved clients such as PuTTY (GH#1933)
- OpenSSH 7.7 and older has a bug preventing it from understanding how to
perform SHA2 signature verification for RSA certificates (specifically
certs - not keys), so when we added SHA2 support it broke all clients using
RSA certificates with these servers; this has been fixed in a manner similar
to what OpenSSH's own client does - a version check is performed and the
algorithm used is downgraded if needed (GH#2017)
- Recent versions of Cryptography have deprecated Blowfish algorithm support;
in lieu of an easy method for users to remove it from the list of
algorithms Paramiko tries to import and use, we've decided to remove it
from our "preferred algorithms" list, which will both discourage use of a
weak algorithm, and avoid warnings (GH#2038, GH#2039)
- Windows-native SSH agent support as merged in 2.10 could encounter
'Errno 22' 'OSError' exceptions in some scenarios (e.g. server not cleanly
closing a relevant named pipe); this has been worked around and should be
less problematic (GH#2008, GH#2010)
- Add SSH config token expansion (eg '%%h', '%%p') when parsing 'ProxyJump'
directives (GH#1951)
- Apply unittest 'skipIf' to tests currently using SHA1 in their critical
path, to avoid failures on systems starting to disable SHA1 outright in
their crypto backends (e.g. RHEL 9) (GH#2004, GH#2011)
* Tue Apr 26 2022 Paul Howarth <paul@city-fan.org> - 2.10.4-1
- Update to 2.10.4
- Update 'camelCase' method calls against the 'threading' module to be
'snake_case'; this and related tweaks should fix some deprecation warnings
under Python 3.10 (GH#1838, GH#1870, GH#2028)
- '~paramiko.pkey.PKey' instances' '__eq__' did not have the usual safety
guard in place to ensure they were being compared to another 'PKey' object,
causing occasional spurious 'BadHostKeyException', among other things
(GH#1964, GH#2023, GH#2024)
- Servers offering certificate variants of hostkey algorithms (e.g.
'ssh-rsa-cert-v01@openssh.com') could not have their host keys verified by
Paramiko clients, as it only ever considered non-cert key types for that
part of connection handshaking (GH#2035)
* Mon Mar 21 2022 Paul Howarth <paul@city-fan.org> - 2.10.3-2
- Skip tests that would fail without SHA-1 signing support in backend, such as
on EL-9 (GH#2011)
* Sat Mar 19 2022 Paul Howarth <paul@city-fan.org> - 2.10.3-1
- Update to 2.10.3
- Certificate-based pubkey auth was inadvertently broken when adding SHA2
support in version 2.9.0 (GH#1963, GH#1977)
- Switch from module-global to thread-local storage when recording thread IDs
for a logging helper; this should avoid one flavor of memory leak for
long-running processes (GH#2002, GH#2003)
* Tue Mar 15 2022 Paul Howarth <paul@city-fan.org> - 2.10.2-1
- Update to 2.10.2
- Fix Python 2 compatibility breakage introduced in 2.10.1 (GH#2001)
- Re-enable sftp tests, no longer failing under mock
* Sun Mar 13 2022 Paul Howarth <paul@city-fan.org> - 2.10.1-1
- Update to 2.10.1
- CVE-2022-24302: Creation of new private key files using
'~paramiko.pkey.PKey' subclasses was subject to a race condition between
file creation and mode modification, which could be exploited by an
attacker with knowledge of where the Paramiko-using code would write out
such files; this has been patched by using 'os.open' and 'os.fdopen' to
ensure new files are opened with the correct mode immediately (we've left
the subsequent explicit 'chmod' in place to minimize any possible
disruption, though it may get removed in future backwards-incompatible
updates)
- Add support for the '%%C' token when parsing SSH config files (GH#1976)
- Add support for OpenSSH's Windows agent as a fallback when Putty/WinPageant
isn't available or functional (GH#1509, GH#1837, GH#1868)
- Significantly speed up low-level read/write actions on
'~paramiko.sftp_file.SFTPFile' objects by using 'bytearray'/'memoryview'
(GH#892); this is unlikely to change anything for users of the higher level
methods like 'SFTPClient.get' or 'SFTPClient.getfo', but users of
'SFTPClient.open' will likely see orders of magnitude improvements for
files larger than a few megabytes in size
- Add 'six' explicitly to install-requires; it snuck into active use at some
point but has only been indicated by transitive dependency on 'bcrypt'
until they somewhat-recently dropped it (GH#1985); this will be short-lived
until we drop Python 2 support
* Fri Jan 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.9.2-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
* Fri Jan 14 2022 Paul Howarth <paul@city-fan.org> - 2.9.2-2
- Avoid use of deprecated python-mock by using unittest.mock instead
https://github.com/paramiko/paramiko/pull/1666
* Sat Jan 8 2022 Paul Howarth <paul@city-fan.org> - 2.9.2-1
- Update to 2.9.2
- Connecting to servers that support 'server-sig-algs' but which have no
overlap between that list and what a Paramiko client supports, now raise
an exception instead of defaulting to 'rsa-sha2-512' (since the use of
'server-sig-algs' allows us to know what the server supports)
- Enhanced log output when connecting to servers that do not support
'server-sig-algs' extensions, making the new-as-of-2.9 defaulting to SHA2
pubkey algorithms more obvious when it kicks in
* Sat Dec 25 2021 Paul Howarth <paul@city-fan.org> - 2.9.1-1
- Update to 2.9.1
- Server-side support for 'rsa-sha2-256' and 'ssh-rsa' wasn't fully operable
after 2.9.0's release (signatures for RSA pubkeys were always run through
'rsa-sha2-512' instead) (GH#1935)
* Fri Dec 24 2021 Paul Howarth <paul@city-fan.org> - 2.9.0-1
- Update to 2.9.0
- Add support for SHA-2 variants of RSA key verification algorithms (as
described in RFC 8332) as well as limited SSH extension negotiation (RFC
8308) (GH#1326, GH#1643, GH#1644, GH#1925)
How SSH servers/clients decide when and how to use this functionality can be
complicated; Paramiko's support is as follows:
- Client verification of server host key during key exchange will now prefer
rsa-sha2-512, rsa-sha2-256, and legacy ssh-rsa algorithms, in that order,
instead of just ssh-rsa
- Note that the preference order of other algorithm families such as
ed25519 and ecdsa has not changed; for example, those two groups are still
preferred over RSA
- Server mode will now offer all 3 RSA algorithms for host key verification
during key exchange, similar to client mode, if it has been configured
with an RSA host key
- Client mode key exchange now sends the ext-info-c flag signaling support
for MSG_EXT_INFO, and support for parsing the latter (specifically, its
server-sig-algs flag) has been added
- Client mode, when performing public key authentication with an RSA key or
cert, will act as follows:
- In all cases, the list of algorithms to consider is based on the new
preferred_pubkeys list and disabled_algorithms; this list, like with
host keys, prefers SHA2-512, SHA2-256 and SHA1, in that order
- When the server does not send server-sig-algs, Paramiko will attempt
the first algorithm in the above list; clients connecting to legacy
servers should thus use disabled_algorithms to turn off SHA2
- When the server does send server-sig-algs, the first algorithm
supported by both ends is used, or if there is none, it falls back to
the previous behavior
- SSH agent support grew the ability to specify algorithm flags when
requesting private key signatures; this is now used to forward SHA2
algorithms when appropriate
- Server mode is now capable of pubkey auth involving SHA-2 signatures from
clients, provided one's server implementation actually provides for doing
so; this includes basic support for sending MSG_EXT_INFO (containing
server-sig-algs only) to clients advertising ext-info-c in their key
exchange list
In order to implement the above, the following API additions were made:
- 'PKey.sign_ssh_data <paramiko.pkey.PKey>': Grew an extra, optional
'algorithm' keyword argument (defaulting to 'None' for most subclasses,
and to "ssh-rsa" for '~paramiko.rsakey.RSAKey')
- A new '~paramiko.ssh_exception.SSHException' subclass was added,
'~paramiko.ssh_exception.IncompatiblePeer', and is raised in all spots
where key exchange aborts due to algorithmic incompatibility; like all
other exceptions in that module, it inherits from 'SSHException', and as
nothing else was changed about the raising (i.e. the attributes and
message text are the same) this change is backwards compatible
- '~paramiko.transport.Transport' grew a '_preferred_pubkeys' attribute and
matching 'preferred_pubkeys' property to match the other, kex-focused,
such members; this allows client pubkey authentication to honor the
'disabled_algorithms' feature
* Mon Nov 29 2021 Paul Howarth <paul@city-fan.org> - 2.8.1-1
- Update to 2.8.1
- Fix listdir failure when server uses a locale (GH#985, GH#992); now on
Python 2.7 SFTPAttributes will decode abbreviated month names correctly
rather than raise 'UnicodeDecodeError'
- Deleting items from '~paramiko.hostkeys.HostKeys' would incorrectly raise
'KeyError' even for valid keys, due to a logic bug (GH#1024)
- Update RSA and ECDSA key decoding subroutines to correctly catch exception
types thrown by modern versions of Cryptography (specifically 'TypeError'
and its internal 'UnsupportedAlgorithm') (GH#1257, GH#1266); these
exception classes will now become '~paramiko.ssh_exception.SSHException'
instances instead of bubbling up
- Update '~paramiko.pkey.PKey' and subclasses to compare ('__eq__') via
direct field/attribute comparison instead of hashing (while retaining the
existing behavior of '__hash__' via a slight refactor) (GH#908)
Warning:
This fixes a security flaw! If you are running Paramiko on 32-bit systems
with low entropy (such as any 32-bit Python 2, or a 32-bit Python 3 that is
running with 'PYTHONHASHSEED=0') it is possible for an attacker to craft a
new keypair from an exfiltrated public key, which Paramiko would consider
equal to the original key.
This could enable attacks such as, but not limited to, the following:
- Paramiko server processes would incorrectly authenticate the attacker
(using their generated private key) as if they were the victim. We see
this as the most plausible attack using this flaw.
- Paramiko client processes would incorrectly validate a connected server
(when host key verification is enabled) while subjected to a
man-in-the-middle attack. This impacts more users than the server-side
version, but also carries higher requirements for the attacker, namely
successful DNS poisoning or other MITM techniques.
* Mon Oct 11 2021 Paul Howarth <paul@city-fan.org> - 2.8.0-1
- Update to 2.8.0
- Administrivia overhaul, including but not limited to:
- Migrate CI to CircleCI
- Primary dev branch is now 'main' (renamed)
- Many README edits for clarity, modernization etc.; including a bunch more
(and consistent) status badges and unification with main project site
index
- PyPI page much more fleshed out (long_description is now filled in with
the README; sidebar links expanded; etc.)
- flake8, pytest configs split out of setup.cfg into their own files
- Invoke/invocations (used by maintainers/contributors) upgraded to modern
versions
- Newer server-side key exchange algorithms not intended to use SHA1
(diffie-hellman-group14-sha256, diffie-hellman-group16-sha512) were
incorrectly using SHA1 after all, due to a bug causing them to ignore the
'hash_algo' class attribute; this has been corrected (GH#1452, GH#1882)
- Add a 'prefetch' keyword argument to 'SFTPClient.get'/'SFTPClient.getfo' so
that users who need to skip SFTP prefetching are able to conditionally turn
it off (GH#1846)
* Fri Jul 23 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.2-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
* Fri Jun 04 2021 Python Maint <python-maint@redhat.com> - 2.7.2-5
- Rebuilt for Python 3.10
* Wed Mar 3 2021 Paul Howarth <paul@city-fan.org> - 2.7.2-4
- Drop invoke dependencies as it requires ancient pytest and we can't expect
it to remain around
* Tue Mar 02 2021 Dan Radez <dradez@redhat.com> - 2.7.2-3
- Removing the python-relax dep using upstream patch
https://github.com/paramiko/paramiko/pull/1665/
* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.2-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Mon Aug 31 2020 Paul Howarth <paul@city-fan.org> - 2.7.2-1
- Update to 2.7.2
- Update our CI to catch issues with sdist generation, installation and
testing
- Add missing test suite fixtures directory to MANIFEST.in, reinstating the
ability to run Paramiko's tests from an sdist tarball (GH#1727)
- Remove leading whitespace from OpenSSH RSA test suite static key fixture,
to conform better to spec. (GH#1722)
- Fix incorrect string formatting causing unhelpful error message annotation
when using Kerberos/GSSAPI
- Fix incorrectly swapped order of 'p' and 'q' numbers when loading
OpenSSH-format RSA private keys; at minimum this should address a slowdown
when using such keys, and it also means Paramiko works with Cryptography
3.1 and above, which complains strenuously when this problem appears
(GH#1723)
* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.1-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Sat May 30 2020 Paul Howarth <paul@city-fan.org> - 2.7.1-4
- Avoid FTBFS with pytest 5 (pytest-relaxed pulls in pytest 4)
- Drop explicit dependencies for things that the python dependency generator
finds by itself
* Sun May 24 2020 Miro Hrončok <mhroncok@redhat.com> - 2.7.1-3
- Rebuilt for Python 3.9
* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
* Wed Dec 11 2019 Paul Howarth <paul@city-fan.org> - 2.7.1-1
- Update to 2.7.1
- The new-style private key format (added in 2.7.0) suffered from an
unpadding bug that had been fixed earlier for Ed25519 (as that key type has
always used the newer format); that fix has been refactored and applied to
the base key class (GH#1567)
- Fix a bug in support for ECDSA keys under the newly-supported OpenSSH key
format (GH#1565, GH#1566)
* Wed Dec 4 2019 Paul Howarth <paul@city-fan.org> - 2.7.0-1
- Update to 2.7.0
- Implement support for OpenSSH 6.5-style private key files (typically
denoted as having 'BEGIN OPENSSH PRIVATE KEY' headers instead of PEM
format's 'BEGIN RSA PRIVATE KEY' or similar); if you were getting any sort
of weird auth error from "modern" keys generated on newer operating system
releases (such as macOS Mojave), this is the first update to try (GH#602,
GH#618, GH#1313, GH#1343)
- Token expansion in 'ssh_config' used a different method of determining the
local username ('$USER' environment variable), compared to what the (much
older) client connection code does ('getpass.getuser', which includes
'$USER' but may check other variables first, and is generally much more
comprehensive); both modules now use 'getpass.getuser'
- A couple of outright '~paramiko.config.SSHConfig' parse errors were
previously represented as vanilla 'Exception' instances; as part of recent
feature work a more specific exception class,
'~paramiko.ssh_exception.ConfigParseError', has been created; it is now
also used in those older spots, which is naturally backwards compatible
- Implement support for the 'Match' keyword in 'ssh_config' files;
previously, this keyword was simply ignored and keywords inside such blocks
were treated as if they were part of the previous block (GH#717)
- Note: this feature adds a new optional install dependency 'Invoke'
(https://www.pyinvoke.org), for managing 'Match exec' subprocesses
- Additional installation 'extras_require' "flavors" ('ed25519', 'invoke',
and 'all') have been added to our packaging metadata
- Paramiko's use of 'subprocess' for 'ProxyCommand' support is conditionally
imported to prevent issues on limited interpreter platforms like Google
Compute Engine; however, any resulting 'ImportError' was lost instead of
preserved for raising (in the rare cases where a user tried leveraging
'ProxyCommand' in such an environment); this has been fixed
- Perform deduplication of 'IdentityFile' contents during 'ssh_config'
parsing; previously, if your config would result in the same value being
encountered more than once, 'IdentityFile' would contain that many copies
of the same string
- Implement most 'canonical hostname' 'ssh_config' functionality
('CanonicalizeHostname', 'CanonicalDomains', 'CanonicalizeFallbackLocal',
and 'CanonicalizeMaxDots'; 'CanonicalizePermittedCNAMEs' has *not* yet
been implemented) - all were previously silently ignored (GH#897)
- Explicitly document which ssh_config features we currently support;
previously users just had to guess, which is simply no good
- Add new convenience classmethod constructors to
'~paramiko.config.SSHConfig': '~paramiko.config.SSHConfig.from_text',
'~paramiko.config.SSHConfig.from_file', and
'~paramiko.config.SSHConfig.from_path'; no more annoying two-step process!
- Add Recommends: of python3-invoke and python3-pyasn1 for optional
functionality
* Sun Oct 06 2019 Othman Madjoudj <athmane@fedoraproject.org> - 2.6.0-5
- Drop python2 subpackage since it's eol-ed
* Thu Oct 03 2019 Miro Hrončok <mhroncok@redhat.com> - 2.6.0-4
- Rebuilt for Python 3.8.0rc1 (#1748018)
* Mon Aug 19 2019 Miro Hrončok <mhroncok@redhat.com> - 2.6.0-3
- Rebuilt for Python 3.8
* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.6.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Thu Jun 27 2019 Paul Howarth <paul@city-fan.org> - 2.6.0-1
- Update to 2.6.0
- Add a new keyword argument to 'SSHClient.connect' and
'~paramiko.transport.Transport', 'disabled_algorithms', which allows
selectively disabling one or more kex/key/cipher/etc algorithms; this can
be useful when disabling algorithms your target server (or client) does not
support cleanly, or to work around unpatched bugs in Paramiko's own
implementation thereof (GH#1463)
- Tweak many exception classes so their string representations are more
human-friendly; this also includes incidental changes to some 'super()'
calls (GH#1440, GH#1460)
- Add backwards-compatible support for the 'gssapi' GSSAPI library, as the
previous backend ('python-gssapi') has become defunct (GH#584, GH#1166,
GH#1311)
- 'SSHClient.exec_command' now returns a new subclass,
'~paramiko.channel.ChannelStdinFile', rather than a naïve
'~paramiko.channel.ChannelFile' object for its 'stdin' value, which fixes
issues such as hangs when running remote commands that read from stdin
(GH#322)
- Drop gssapi patch as it's no longer needed
- Drop pytest-relaxed patch as it's no longer needed
* Thu Jun 27 2019 Paul Howarth <paul@city-fan.org> - 2.5.1-1
- Update to 2.5.1
- Fix Ed25519 key handling so certain key comment lengths don't cause
'SSHException("Invalid key")' (GH#1306, GH#1400)
* Mon Jun 10 2019 Paul Howarth <paul@city-fan.org> - 2.5.0-1
- Update to 2.5.0
- Add support for encrypt-then-MAC (ETM) schemes and two newer Diffie-Hellman
group key exchange algorithms ('group14', using SHA256; and 'group16',
using SHA512)
- Add support for Curve25519 key exchange
- Raise Cryptography dependency requirement to version 2.5 (from 1.5) and
update some deprecated uses of its API
- Add support for the modern (as of Python 3.3) import location of
'MutableMapping' (used in host key management) to avoid the old location
becoming deprecated in Python 3.8
- Drop hard dependency on pyasn1 as it's only needed for optional GSSAPI
functionality
* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.4.2-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Tue Oct 9 2018 Paul Howarth <paul@city-fan.org> - 2.4.2-1
- Update to 2.4.2
- Fix exploit (GH#1283, CVE-2018-1000805) in Paramiko’s server mode (not
client mode) where hostile clients could trick the server into thinking
they were authenticated without actually submitting valid authentication
- Modify protocol message handling such that Transport does not respond to
MSG_UNIMPLEMENTED with its own MSG_UNIMPLEMENTED; this behavior probably
didn’t cause any outright errors, but it doesn’t seem to conform to the
RFCs and could cause (non-infinite) feedback loops in some scenarios
(usually those involving Paramiko on both ends)
- Add *.pub files to the MANIFEST so distributed source packages contain
some necessary test assets (GH#1262)
- Test suite now requires mock ≥ 2.0.0
* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.4.1-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jun 20 2018 Miro Hrončok <mhroncok@redhat.com> - 2.4.1-4
- Rebuilt for Python 3.7
- Remove dependency on on pytest-relaxed
* Fri Mar 16 2018 Paul Howarth <paul@city-fan.org> - 2.4.1-1
- Update to 2.4.1
- Fix a security flaw (GH#1175, CVE-2018-7750) in Paramiko's server mode
(this does not impact client use) where authentication status was not
checked before processing channel-open and other requests typically only
sent after authenticating
- Ed25519 auth key decryption raised an unexpected exception when given a
unicode password string (typical in python 3) (GH#1039)
* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.4.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
* Sat Nov 18 2017 Athmane Madjoudj <athmane@fedoraproject.org> - 2.4.0-2
- Add gssapi patch back since 2.4.0 still not compatible
- Add missing BR (lost during merge)
* Fri Nov 17 2017 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 2.4.0-1
- Update to 2.4.0
* Wed Nov 15 2017 Athmane Madjoudj <athmane@fedoraproject.org> - 2.4.0-1
- Update to 2.4.0 (rhbz #1513208)
- Revamp check section
* Sun Oct 29 2017 Athmane Madjoudj <athmane@fedoraproject.org> - 2.3.1-3
- Add a patch to disable gssapi on unsupported version (rhbz #1507174)
* Tue Sep 26 2017 Athmane Madjoudj <athmane@fedoraproject.org> - 2.3.1-2
- Remove weak deps, paramiko does not support recent gssapi (rhbz #1496148)
* Sat Sep 23 2017 Athmane Madjoudj <athmane@fedoraproject.org> - 2.3.1-1
- Update to 2.3.1 (rhbz #1494764)
* Wed Sep 20 2017 Paul Howarth <paul@city-fan.org> - 2.3.0-1
- 2.3.0.
* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.2.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
* Wed Jun 14 2017 Paul Howarth <paul@city-fan.org> - 2.2.1-1
- 2.2.1.
* Sun Jun 11 2017 Paul Howarth <paul@city-fan.org> - 2.2.0-1
- 2.2.0.
* Wed Feb 22 2017 Paul Howarth <paul@city-fan.org> - 2.1.2-1
- 2.1.2.
* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.1.1-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
* Mon Dec 19 2016 Miro Hrončok <mhroncok@redhat.com> - 2.1.1-2
- Rebuild for Python 3.6
* Fri Dec 16 2016 Jon Ciesla <limburgher@gmail.com> - 2.1.1-1
- 2.1.1.
* Fri Dec 09 2016 Jon Ciesla <limburgher@gmail.com> - 2.1.0-1
- 2.1.0.
* Fri Dec 09 2016 Jon Ciesla <limburgher@gmail.com> - 2.0.2-1
- 2.0.2.
* Tue Jul 19 2016 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-2
- https://fedoraproject.org/wiki/Changes/Automatic_Provides_for_Python_RPM_Packages
* Fri Apr 29 2016 Igor Gnatenko <ignatenko@redhat.com> - 2.0.0-1
- Update to 2.0.0 (RHBZ #1331737)
* Sun Mar 27 2016 Igor Gnatenko <i.gnatenko.brain@gmail.com> - 1.16.0-1
- Update to 1.16.0
- Adopt to new packaging guidelines
* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1.15.2-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
* Tue Nov 10 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.15.2-4
- Rebuilt for https://fedoraproject.org/wiki/Changes/python3.5
* Thu Jun 18 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.15.2-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
* Sun Mar 22 2015 Peter Robinson <pbrobinson@fedoraproject.org> 1.15.2-2
- Use %%license
- Move duplicated docs to single doc sub package
- Remove old F-15 conditionals
* Tue Dec 23 2014 Athmane Madjoudj <athmane@fedoraproject.org> 1.15.2-1
- Update to 1.15.2
* Mon Nov 24 2014 Athmane Madjoudj <athmane@fedoraproject.org> 1.15.1-5
- Add conditional to exclude EL since does not have py3
* Sat Nov 15 2014 Athmane Madjoudj <athmane@fedoraproject.org> 1.15.1-4
- py3dir creation should be in prep section
* Fri Nov 14 2014 Athmane Madjoudj <athmane@fedoraproject.org> 1.15.1-3
- Build each pkg in a clean dir
* Fri Nov 14 2014 Athmane Madjoudj <athmane@fedoraproject.org> 1.15.1-2
- Add support for python3
- Add BR -devel for python macros.
* Fri Oct 17 2014 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.15.1-1
- Update to 1.15.1
* Fri Jun 13 2014 Orion Poplawski <orion@cora.nwra.com> - 1.12.4-1
- Update to 1.12.4
* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.12.2-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
* Tue Feb 25 2014 Orion Poplawski <orion@cora.nwra.com> - 1.12.2-1
- Update to 1.12.2
* Wed Jan 22 2014 Orion Poplawski <orion@cora.nwra.com> - 1.11.3-1
- Update to 1.11.3
* Mon Oct 21 2013 Orion Poplawski <orion@cora.nwra.com> - 1.11.0-1
- Update to 1.11.0
* Sun Aug 04 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.10.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
* Thu May 9 2013 Jeffrey Ollie <jeff@ocjtech.us> - 1.10.1-1
- Update to 1.10.1
* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.9.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
* Wed Jan 2 2013 Jeffrey Ollie <jeff@ocjtech.us> - 1.9.0-1
- Update to 1.9.0
* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.7.7.1-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.7.7.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
* Wed Jul 6 2011 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.7.1-1
- v1.7.7.1 (George) 21may11
- -------------------------
- * Make the verification phase of SFTP.put optional (Larry Wright)
- * Patches to fix AIX support (anonymous)
- * Patch from Michele Bertoldi to allow compression to be turned on in the
- client constructor.
- * Patch from Shad Sharma to raise an exception if the transport isn't active
- when you try to open a new channel.
- * Stop leaking file descriptors in the SSH agent (John Adams)
- * More fixes for Windows address family support (Andrew Bennetts)
- * Use Crypto.Random rather than Crypto.Util.RandomPool
- (Gary van der Merwe, #271791)
- * Support for openssl keys (tehfink)
- * Fix multi-process support by calling Random.atfork (sugarc0de)
* Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.7.6-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
* Tue Jan 4 2011 Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.6-3
- Patch to address deprecation warning from pycrypto
- Simplify build as shown in new python guidelines
- Enable test suite
* Thu Jul 22 2010 David Malcolm <dmalcolm@redhat.com> - 1.7.6-2
- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
* Mon Nov 2 2009 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.6-1
- v1.7.6 (Fanny) 1nov09
- ---------------------
- * fixed bugs 411099 (sftp chdir isn't unicode-safe), 363163 & 411910 (more
- IPv6 problems on windows), 413850 (race when server closes the channel),
- 426925 (support port numbers in host keys)
* Tue Oct 13 2009 Jeremy Katz <katzj@fedoraproject.org> - 1.7.5-2
- Fix race condition (#526341)
* Thu Jul 23 2009 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.5-1
- v1.7.5 (Ernest) 19jul09
- -----------------------
- * added support for ARC4 cipher and CTR block chaining (Denis Bernard)
- * made transport threads daemonize, to fix python 2.6 atexit behavior
- * support unicode hostnames, and IP6 addresses (Maxime Ripard, Shikhar
- Bhushan)
- * various small bug fixes
* Thu Feb 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.7.4-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
* Mon Feb 16 2009 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.4-4
- Add demos as documentation. BZ#485742
* Sat Nov 29 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 1.7.4-3
- Rebuild for Python 2.6
* Wed Sep 3 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 1.7.4-2
- fix license tag
* Sun Jul 6 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.4-1
- Update to 1.7.4
* Mon Mar 24 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.3-1
- Update to 1.7.3.
* Tue Jan 22 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.2-1
- Update to 1.7.2.
- Remove upstreamed patch.
* Mon Jan 14 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.1-3
- Update to latest Python packaging guidelines.
- Apply patch that fixes insecure use of RandomPool.
* Thu Jul 19 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.1-2
- Bump rev
* Thu Jul 19 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.1-1
- Update to 1.7.1
* Sat Dec 09 2006 Toshio Kuratomi <toshio@tiki-lounge.com> - 1.6.4-1
- Update to 1.6.4
- Upstream is now shipping tarballs
- Bump for python 2.5 in devel
* Mon Oct 9 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.6.2-1
- Update to 1.6.2
* Sat Sep 16 2006 Shahms E. King <shahms@shahms.com> 1.6.1-3
- Rebuild for FC6
* Fri Aug 11 2006 Shahms E. King <shahms@shahms.com> 1.6.1-2
- Include, don't ghost .pyo files per new guidelines
* Tue Aug 08 2006 Shahms E. King <shahms@shahms.com> 1.6.1-1
- Update to new upstream version
* Fri Jun 02 2006 Shahms E. King <shahms@shahms.com> 1.6-1
- Update to new upstream version
- ghost the .pyo files
* Fri May 05 2006 Shahms E. King <shahms@shahms.com> 1.5.4-2
- Fix source line and rebuild
* Fri May 05 2006 Shahms E. King <shahms@shahms.com> 1.5.4-1
- Update to new upstream version
* Wed Apr 12 2006 Shahms E. King <shahms@shahms.com> 1.5.3-1
- Initial package