Name: powertop
Version: 2.3
Release: 11%{?dist}
Summary: Power consumption monitor
Group: Applications/System
License: GPLv2
URL: http://01.org/powertop/
Source0: http://01.org/powertop/sites/default/files/downloads/%{name}-%{version}.tar.gz
Source1: powertop.service
# Sent upstream
Patch0: powertop-2.3-always-create-params.patch
# Sent upstream (http://github.com/fenrus75/powertop/pull/11)
Patch1: powertop-2.3-man-fix.patch
# Sent upstream (http://github.com/fenrus75/powertop/pull/12)
Patch2: powertop-2.3-ondemand-check.patch
# Accepted upstream
Patch3: powertop-2.3-unlimit-fds.patch
# Accepted upstream
Patch4: powertop-2.3-fd-limit-err.patch
# Sent upstream
Patch5: powertop-2.3-reg-net-params.patch
Patch6: powertop-2.3-tunable-overflow-fix.patch
# Reported upstream, but upstream powertop needs different patch
Patch7: powertop-2.3-msr-check.patch
# Backported from upstream
Patch8: powertop-2.3-auto-tune.patch
# Sent upstream
Patch9: powertop-2.3-improve-reporting.patch
# Sent upstream (https://github.com/fenrus75/powertop/pull/22)
# RHEL patch has slightly different default behavior not to break
# backward compatibility, i.e. it writes by default to powertop.html/csv file.
# It can write to STDOUT if "-" is used as filename., but the -d, --dump writes
# by default to STDOUT if no filename is given
Patch10: powertop-2.3-dump-option.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: gettext, ncurses-devel, pciutils-devel, zlib-devel, libnl3-devel
BuildRequires: systemd
Requires(post): systemd, coreutils
Requires(preun): systemd
Requires(postun): systemd
%description
PowerTOP is a tool that finds the software component(s) that make your
computer use more power than necessary while it is idle.
%prep
%setup -q
%patch0 -p1 -b .always-create-params
%patch1 -p1 -b .man-fix
%patch2 -p1 -b .ondemand-check
%patch3 -p1 -b .unlimit-fds
%patch4 -p1 -b .fd-limit-err
%patch5 -p1 -b .reg-net-params
%patch6 -p1 -b .tunable-overflow-fix.patch
%patch7 -p1 -b .msr-check
%patch8 -p1 -b .auto-tune
%patch9 -p1 -b .improve-reporting
%patch10 -p1 -b .dump-option
# remove left over object files
find . -name "*.o" -exec rm {} \;
%build
%configure
make %{?_smp_mflags} CFLAGS="%{optflags}"
%install
rm -rf %{buildroot}
make install DESTDIR=%{buildroot}
install -Dd %{buildroot}%{_localstatedir}/cache/powertop
touch %{buildroot}%{_localstatedir}/cache/powertop/{saved_parameters.powertop,saved_results.powertop}
%find_lang %{name}
# Systemd
install -Dpm 644 %{SOURCE1} %{buildroot}%{_unitdir}/powertop.service
%preun
%systemd_preun powertop.service
%postun
%systemd_postun_with_restart powertop.service
%post
%systemd_post powertop.service
# Hack for powertop not to show warnings on first start
touch %{_localstatedir}/cache/powertop/{saved_parameters.powertop,saved_results.powertop}
%clean
rm -rf %{buildroot}
%files -f %{name}.lang
%defattr(-,root,root,-)
%doc COPYING README TODO
%dir %{_localstatedir}/cache/powertop
%ghost %{_localstatedir}/cache/powertop/saved_parameters.powertop
%ghost %{_localstatedir}/cache/powertop/saved_results.powertop
%{_sbindir}/powertop
%{_mandir}/man8/powertop.8*
%{_unitdir}/powertop.service
%changelog
* Mon Jul 4 2016 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-11
- Added missing short options to manual page
Related: rhbz#1333495
* Wed May 11 2016 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-10
- Reintroduced -d, --dump option and added plain report mode,
fixed parameters and manual page
Resolves: rhbz#1333495
* Mon May 11 2015 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-9
- MSR read errors are no more fatal (by msr-check patch)
Resolves: rhbz#1102088
- Backported --auto-tune feature and added one-shot systemd service
(by auto-tune patch)
Resolves: rhbz#1143014
- Improved handling of reporting filenames (by improve-reporting patch)
Resolves: rhbz#1039822
* Tue Mar 25 2014 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-8
- Fixed buffer overflow in cpufreq tunables on systems with many CPUs
(by tunable-overflow-fix patch)
Resolves: rhbz#1080191
* Fri Jan 24 2014 Daniel Mach <dmach@redhat.com> - 2.3-7
- Mass rebuild 2014-01-24
* Fri Dec 27 2013 Daniel Mach <dmach@redhat.com> - 2.3-6
- Mass rebuild 2013-12-27
* Tue Oct 29 2013 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-5
- Fixed some possible unregistered parameters errors
(by reg-net-param patch)
Resolves: rhbz#1014662
- Unlimit FDs (by unlimit-fds patch)
Printed friendly error message if the system is running out
of FDs (by fd-limit-err patch)
Resolves: rhbz#1017668
* Fri Jun 28 2013 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-4
- Added check if ondemand governor is applicable (by ondemand-check patch)
Resolves: rhbz#697273
* Tue Jun 25 2013 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-3
- Added workload option to the man page
* Wed Apr 10 2013 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-2
- Added post requirements for coreutils
* Wed Mar 20 2013 Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-1
- New version
Resolves: rhbz#923729
- Dropped fix-crash-on-readonly-fs, reduce-syscalls,
gpu-wiggle-fix patches (upstreamed)
- Dropped version-fix patch (not needed)
* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.2-7
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
* Sun Jan 20 2013 Dan Horák <dan@danny.cz> - 2.2-6
- rebuilt again for fixed soname in libnl3
* Sun Jan 20 2013 Kalev Lember <kalevlember@gmail.com> - 2.2-5
- Rebuilt for libnl3
* Mon Jan 14 2013 Jaroslav Škarvada <jskarvad@redhat.com> - 2.2-4
- Reduced number of useless syscalls (reduce-syscalls patch) and
fixed gpu wiggle (gpu-wiggle-fix patch)
Resolves: rhbz#886185
* Sun Dec 2 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.2-3
- Updated version to show 2.2 (by version-fix patch)
* Wed Nov 28 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.2-2
- Fixed crash when writing report on readonly filesystem
(fix-crash-on-readonly-fs patch)
* Fri Nov 23 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.2-1
- New version
Resolves: rhbz#877373
- Dropped html-escape patch (not needed)
* Thu Aug 16 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.1-2
- Removed left over object files
* Thu Aug 16 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.1-1
- New version
- Removed patches (all upstreamed): show-watts-only-if-discharging,
valid-html-output, factor-out-powertop-init, catch-fstream-errors
* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Wed Jul 4 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.0-3
- Catch fstream exceptions
Resolves: rhbz#832497
* Mon May 21 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.0-2
- Fixed segfault during calibration
Resolves: rhbz#823502
- Used macro optflags instead of variable RPM_OPT_FLAGS
* Wed May 16 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 2.0-1
- New version
Resolves: rhbz#821144
- Dropped patches: unknown-readings-fix (upstreamed), compile-fix (upstreamed),
power-supply-add-power-now-support (upstreamed),
html-print-commands (upstreamed), add-power-supply-class-support (obsoleted),
power-supply-units-fix (obsoleted)
- Updated patches: show-watts-only-if-discharging patch (sent upstream),
html-escape patch
- Added patch: valid-html-output (sent upstream)
* Tue Apr 17 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 1.98-9
- Show power consumption only if discharging
Resolves: rhbz#811949
* Tue Apr 03 2012 Jan Kaluza <jkaluza@redhat.com> - 1.98-8
- Escape scripts in HTML output
* Mon Mar 26 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 1.98-7
- Print commands which reproduce the tunings into html log (html-print-commands patch)
* Wed Mar 7 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 1.98-6
- Fixed power_supply units
Resolves: rhbz#800814
* Tue Feb 28 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.98-5
- Rebuilt for c++ ABI breakage
* Fri Feb 24 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 1.98-4
- Backported support for power_supply class
(add-power-supply-class-support patch)
- Added support for POWER_NOW readings
(power-supply-add-power-now-support patch)
Resolves: rhbz#796068
* Tue Jan 10 2012 Jaroslav Škarvada <jskarvad@redhat.com> - 1.98-3
- Fixed 'unknown' readings from ACPI meters
Resolves: rhbz#770289
- Fixed compilation on f17
* Fri Dec 2 2011 Jaroslav Škarvada <jskarvad@redhat.com> - 1.98-2
- Always create params file
Resolves: rhbz#698020
- Added cache files
* Wed May 25 2011 Jaroslav Škarvada <jskarvad@redhat.com> - 1.98-1
- New version
* Wed Mar 23 2011 Dan Horák <dan[at]danny.cz> - 1.97-2
- csstoh should return 0
* Tue Feb 15 2011 Jaroslav Škarvada <jskarvad@redhat.com> - 1.97-1
- New version
* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.13-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
* Wed Nov 24 2010 Jaroslav Škarvada <jskarvad@redhat.com> - 1.13-2
- Fixed sigwinch handling (#644800)
- Readded strncpy patch as strncpy is safer than strcpy
- Print all P-states in dump mode
- Added explicit requires for pcituils (#653560)
- Output error in interactive mode if there is no tty (#657212)
- Do not suggest ondemand when p4-clockmod scaling driver is used (#497167)
- Fixed rpmlint warning about mixed tabs and spaces
* Wed Aug 25 2010 Adam Jackson <ajax@redhat.com> 1.13-1
- powertop 1.13
* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.11-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
* Thu Feb 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.11-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
* Tue Jan 06 2009 Adam Jackson <ajax@redhat.com> 1.11-1
- powertop 1.11
* Thu Nov 20 2008 Adam Jackson <ajax@redhat.com>
- Spec only change, fix URL.
* Thu Nov 6 2008 Josh Boyer <jwboyer@gmail.com> - 1.10-1
- Update to latest release
- Drop upstreamed patch
* Wed May 21 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 1.9-4
- fix license tag
* Mon Feb 18 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.9-3
- Autorebuild for GCC 4.3
* Tue Jan 22 2008 Adam Jackson <ajax@redhat.com> 1.9-2
- Use full path when invoking hciconfig. (Ville Skyttä, #426721)
* Mon Dec 10 2007 Josh Boyer <jwboyer@gmail.com> 1.9-1
- Update to latest release
* Mon Aug 20 2007 Josh Boyer <jwboyer@jdub.homelinux.org> 1.8-1
- Update to latest release
* Mon Jul 23 2007 Bill Nottingham <notting@redhat.com> 1.7-4
- add patch to allow dumping output to stdout
* Mon Jul 09 2007 Adam Jackson <ajax@redhat.com> 1.7-3
- powertop-1.7-strncpy.patch: Use strncpy() to avoid stack smash. Patch from
Till Maas. (#246796)
* Thu Jul 05 2007 Adam Jackson <ajax@redhat.com> 1.7-2
- Don't suggest disabling g-p-m. Any additional power consumption is more
than offset by the ability to suspend.
* Mon Jun 18 2007 Adam Jackson <ajax@redhat.com> 1.7-1
- powertop 1.7.
* Mon Jun 11 2007 Adam Jackson <ajax@redhat.com> 1.6-1
- powertop 1.6.
* Tue May 29 2007 Adam Jackson <ajax@redhat.com> 1.5-1
- powertop 1.5.
* Mon May 21 2007 Adam Jackson <ajax@redhat.com> 1.3-1
- powertop 1.3.
* Tue May 15 2007 Adam Jackson <ajax@redhat.com> 1.2-1
- powertop 1.2. Fixes power reports on machines that report power in Amperes
instead of Watts.
* Sun May 13 2007 Adam Jackson <ajax@redhat.com> 1.1-1
- powertop 1.1.
* Fri May 11 2007 Adam Jackson <ajax@redhat.com> 1.0-1
- Initial revision.