From d9ed450713eda62af1bec5009694b2d206c9f435 Mon Sep 17 00:00:00 2001
Message-Id: <d9ed450713eda62af1bec5009694b2d206c9f435.1590585469.git.lorenzo.bianconi@redhat.com>
From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Date: Mon, 25 May 2020 23:55:06 +0200
Subject: [PATCH ovn 1/3] Revert "Manage ARP process locally in a DVR scenario"
This reverts commit c0bf32d72f8b893bbe3cb64912b0fd259d71555f.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Han Zhou <hzhou@ovn.org>
---
northd/ovn-northd.8.xml | 37 ++--------------------------
northd/ovn-northd.c | 53 +----------------------------------------
tests/ovn.at | 14 -----------
3 files changed, 3 insertions(+), 101 deletions(-)
--- a/northd/ovn-northd.8.xml
+++ b/northd/ovn-northd.8.xml
@@ -2486,44 +2486,11 @@ output;
<li>
<p>
- For distributed logical routers where one of the logical router ports
- specifies a <code>redirect-chassis</code>, a priority-400 logical
- flow for each <code>dnat_and_snat</code> NAT rules configured.
- These flows will allow to properly forward traffic to the external
- connections if available and avoid sending it through the tunnel.
- Assuming the following NAT rule has been configured:
- </p>
-
- <pre>
-external_ip = <var>A</var>;
-external_mac = <var>B</var>;
-logical_ip = <var>C</var>;
- </pre>
-
- <p>
- the following action will be applied:
- </p>
-
- <pre>
-ip.ttl--;
-reg0 = <var>ip.dst</var>;
-reg1 = <var>A</var>;
-eth.src = <var>B</var>;
-outport = <var>router-port</var>;
-next;
- </pre>
-
- </li>
-
- <li>
- <p>
IPv4 routing table. For each route to IPv4 network <var>N</var> with
netmask <var>M</var>, on router port <var>P</var> with IP address
<var>A</var> and Ethernet
address <var>E</var>, a logical flow with match <code>ip4.dst ==
- <var>N</var>/<var>M</var></code>, whose priority is <code>400</code>
- + the number of 1-bits in <var>M</var> if the router port is not a
- distributed gateway port, else the priority is the number of
+ <var>N</var>/<var>M</var></code>, whose priority is the number of
1-bits in <var>M</var>, has the following actions:
</p>
@@ -2910,7 +2877,7 @@ icmp4 {
<ul>
<li>
For each NAT rule in the OVN Northbound database that can
- be handled in a distributed manner, a priority-200 logical
+ be handled in a distributed manner, a priority-100 logical
flow with match <code>ip4.src == <var>B</var> &&
outport == <var>GW</var></code>, where <var>GW</var> is
the logical router distributed gateway port, with actions
--- a/northd/ovn-northd.c
+++ b/northd/ovn-northd.c
@@ -7102,8 +7102,6 @@ build_routing_policy_flow(struct hmap *l
ds_destroy(&actions);
}
-/* default logical flow prioriry for distributed routes */
-#define DROUTE_PRIO 400
struct parsed_route {
struct ovs_list list_node;
struct v46_ip prefix;
@@ -7492,40 +7490,6 @@ build_ecmp_route_flow(struct hmap *lflow
}
static void
-add_distributed_routes(struct hmap *lflows, struct ovn_datapath *od)
-{
- struct ds actions = DS_EMPTY_INITIALIZER;
- struct ds match = DS_EMPTY_INITIALIZER;
-
- for (size_t i = 0; i < od->nbr->n_nat; i++) {
- const struct nbrec_nat *nat = od->nbr->nat[i];
-
- if (strcmp(nat->type, "dnat_and_snat") ||
- !nat->external_mac) {
- continue;
- }
-
- bool is_ipv4 = strchr(nat->logical_ip, '.') ? true : false;
- ds_put_format(&match, "ip%s.src == %s && is_chassis_resident(\"%s\")",
- is_ipv4 ? "4" : "6", nat->logical_ip,
- nat->logical_port);
- char *prefix = is_ipv4 ? "" : "xx";
- ds_put_format(&actions, "outport = %s; eth.src = %s; "
- "%sreg0 = ip%s.dst; %sreg1 = %s; next;",
- od->l3dgw_port->json_key, nat->external_mac,
- prefix, is_ipv4 ? "4" : "6",
- prefix, nat->external_ip);
- ovn_lflow_add(lflows, od, S_ROUTER_IN_IP_ROUTING, DROUTE_PRIO,
- ds_cstr(&match), ds_cstr(&actions));
- ds_clear(&match);
- ds_clear(&actions);
- }
-
- ds_destroy(&actions);
- ds_destroy(&match);
-}
-
-static void
add_route(struct hmap *lflows, const struct ovn_port *op,
const char *lrp_addr_s, const char *network_s, int plen,
const char *gateway, bool is_src_route,
@@ -7546,12 +7510,6 @@ add_route(struct hmap *lflows, const str
}
build_route_match(op_inport, network_s, plen, is_src_route, is_ipv4,
&match, &priority);
- /* traffic for internal IPs of logical switch ports must be sent to
- * the gw controller through the overlay tunnels
- */
- if (op->nbrp && !op->nbrp->n_gateway_chassis) {
- priority += DROUTE_PRIO;
- }
struct ds actions = DS_EMPTY_INITIALIZER;
ds_put_format(&actions, "ip.ttl--; "REG_ECMP_GROUP_ID" = 0; %sreg0 = ",
@@ -9187,7 +9145,7 @@ build_lrouter_flows(struct hmap *datapat
nat->logical_ip,
od->l3dgw_port->json_key);
ovn_lflow_add_with_hint(lflows, od, S_ROUTER_IN_GW_REDIRECT,
- 200, ds_cstr(&match), "next;",
+ 100, ds_cstr(&match), "next;",
&nat->header_);
}
@@ -9493,15 +9451,6 @@ build_lrouter_flows(struct hmap *datapat
ovn_lflow_add(lflows, od, S_ROUTER_IN_ND_RA_RESPONSE, 0, "1", "next;");
}
- /* Logical router ingress table IP_ROUTING - IP routing for distributed
- * logical router
- */
- HMAP_FOR_EACH (od, key_node, datapaths) {
- if (od->nbr && od->l3dgw_port) {
- add_distributed_routes(lflows, od);
- }
- }
-
/* Logical router ingress table IP_ROUTING & IP_ROUTING_ECMP: IP Routing.
*
* A packet that arrives at this table is an IP packet that should be
--- a/tests/ovn.at
+++ b/tests/ovn.at
@@ -9605,20 +9605,6 @@ AT_CHECK([as hv3 ovs-vsctl set Open_vSwi
OVS_WAIT_UNTIL([test 1 = `as hv3 ovs-vsctl show | \
grep "Port patch-br-int-to-ln_port" | wc -l`])
-AT_CHECK([test 1 = `ovn-sbctl dump-flows lr0 | grep lr_in_ip_routing | \
-grep "ip4.src == 10.0.0.3 && is_chassis_resident(\"foo1\")" -c`])
-AT_CHECK([test 1 = `ovn-sbctl dump-flows lr0 | grep lr_in_ip_routing | \
-grep "ip4.src == 10.0.0.4 && is_chassis_resident(\"foo2\")" -c`])
-
-key=`ovn-sbctl --bare --columns tunnel_key list datapath_Binding lr0`
-# Check that the OVS flows appear for the dnat_and_snat entries in
-# lr_in_ip_routing table.
-OVS_WAIT_UNTIL([test 1 = `as hv3 ovs-ofctl dump-flows br-int table=17 | \
-grep "priority=400,ip,metadata=0x$key,nw_src=10.0.0.3" -c`])
-
-OVS_WAIT_UNTIL([test 1 = `as hv3 ovs-ofctl dump-flows br-int table=17 | \
-grep "priority=400,ip,metadata=0x$key,nw_src=10.0.0.4" -c`])
-
# Re-add nat-addresses option
ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="router"