diff -up openssh-8.0p1/ssh_config.5.crypto-policies openssh-8.0p1/ssh_config.5
--- openssh-8.0p1/ssh_config.5.crypto-policies 2020-03-24 17:32:54.821789205 +0100
+++ openssh-8.0p1/ssh_config.5 2020-03-24 17:59:58.174122920 +0100
@@ -357,17 +357,17 @@ or
.Qq *.c.example.com
domains.
.It Cm CASignatureAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies which algorithms are allowed for signing of certificates
by certificate authorities (CAs).
-The default is:
-.Bd -literal -offset indent
-ecdsa-sha2-nistp256.ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
-.Pp
.Xr ssh 1
will not accept host certificates signed using algorithms other than those
specified.
+.Pp
.It Cm CertificateFile
Specifies a file from which the user's certificate is read.
A corresponding private key must be provided separately in order
@@ -420,16 +420,21 @@ If the option is set to
.Cm no ,
the check will not be executed.
.It Cm Ciphers
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the ciphers allowed and their order of preference.
Multiple ciphers must be comma-separated.
If the specified value begins with a
.Sq +
-character, then the specified ciphers will be appended to the default set
+character, then the specified ciphers will be appended to the built-in default set
instead of replacing them.
If the specified value begins with a
.Sq -
character, then the specified ciphers (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in default set instead of replacing them.
.Pp
The supported ciphers are:
.Bd -literal -offset indent
@@ -445,13 +450,6 @@ aes256-gcm@openssh.com
chacha20-poly1305@openssh.com
.Ed
.Pp
-The default is:
-.Bd -literal -offset indent
-chacha20-poly1305@openssh.com,
-aes128-ctr,aes192-ctr,aes256-ctr,
-aes128-gcm@openssh.com,aes256-gcm@openssh.com
-.Ed
-.Pp
The list of available ciphers may also be obtained using
.Qq ssh -Q cipher .
.It Cm ClearAllForwardings
@@ -800,6 +798,11 @@ command line will be passed untouched to
The default is
.Dq no .
.It Cm GSSAPIKexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
The list of key exchange algorithms that are offered for GSSAPI
key exchange. Possible values are
.Bd -literal -offset 3n
@@ -812,9 +815,8 @@ gss-nistp256-sha256-,
gss-curve25519-sha256-
.Ed
.Pp
-The default is
-.Dq gss-group14-sha256-,gss-group16-sha512-,gss-nistp256-sha256-,gss-curve25519-sha256-,gss-group14-sha1-,gss-gex-sha1- .
This option only applies to connections using GSSAPI.
+.Pp
.It Cm HashKnownHosts
Indicates that
.Xr ssh 1
@@ -1114,26 +1115,21 @@ it may be zero or more of:
and
.Cm pam .
.It Cm KexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the available KEX (Key Exchange) algorithms.
Multiple algorithms must be comma-separated.
Alternately if the specified value begins with a
.Sq +
-character, then the specified methods will be appended to the default set
+character, then the specified methods will be appended to the built-in default set
instead of replacing them.
If the specified value begins with a
.Sq -
character, then the specified methods (including wildcards) will be removed
-from the default set instead of replacing them.
-The default is:
-.Bd -literal -offset indent
-curve25519-sha256,curve25519-sha256@libssh.org,
-ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
-diffie-hellman-group-exchange-sha256,
-diffie-hellman-group16-sha512,
-diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256,
-diffie-hellman-group14-sha1
-.Ed
+from the built-in default set instead of replacing them.
.Pp
The list of available key exchange algorithms may also be obtained using
.Qq ssh -Q kex .
@@ -1193,33 +1189,29 @@ The default is INFO.
DEBUG and DEBUG1 are equivalent.
DEBUG2 and DEBUG3 each specify higher levels of verbose output.
.It Cm MACs
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the MAC (message authentication code) algorithms
in order of preference.
The MAC algorithm is used for data integrity protection.
Multiple algorithms must be comma-separated.
If the specified value begins with a
.Sq +
-character, then the specified algorithms will be appended to the default set
+character, then the specified algorithms will be appended to the built-in default set
instead of replacing them.
If the specified value begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in default set instead of replacing them.
.Pp
The algorithms that contain
.Qq -etm
calculate the MAC after encryption (encrypt-then-mac).
These are considered safer and their use recommended.
.Pp
-The default is:
-.Bd -literal -offset indent
-umac-64-etm@openssh.com,umac-128-etm@openssh.com,
-hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
-hmac-sha1-etm@openssh.com,
-umac-64@openssh.com,umac-128@openssh.com,
-hmac-sha2-256,hmac-sha2-512,hmac-sha1
-.Ed
-.Pp
The list of available MAC algorithms may also be obtained using
.Qq ssh -Q mac .
.It Cm NoHostAuthenticationForLocalhost
@@ -1352,27 +1344,21 @@ instead of continuing to execute and pas
The default is
.Cm no .
.It Cm PubkeyAcceptedKeyTypes
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the key types that will be used for public key authentication
as a comma-separated list of patterns.
Alternately if the specified value begins with a
.Sq +
-character, then the key types after it will be appended to the default
+character, then the key types after it will be appended to the built-in default
instead of replacing it.
If the specified value begins with a
.Sq -
character, then the specified key types (including wildcards) will be removed
-from the default set instead of replacing them.
-The default for this option is:
-.Bd -literal -offset 3n
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-ssh-ed25519-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,
-ssh-rsa-cert-v01@openssh.com,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
+from the built-in default set instead of replacing them.
.Pp
The list of available key types may also be obtained using
.Qq ssh -Q key .
diff -up openssh-8.0p1/sshd_config.5.crypto-policies openssh-8.0p1/sshd_config.5
--- openssh-8.0p1/sshd_config.5.crypto-policies 2020-03-24 17:32:54.802788908 +0100
+++ openssh-8.0p1/sshd_config.5 2020-03-24 17:54:13.347740176 +0100
@@ -383,16 +383,16 @@ If the argument is
then no banner is displayed.
By default, no banner is displayed.
.It Cm CASignatureAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies which algorithms are allowed for signing of certificates
by certificate authorities (CAs).
-The default is:
-.Bd -literal -offset indent
-ecdsa-sha2-nistp256.ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
-.Pp
Certificates signed using other algorithms will not be accepted for
public key or host-based authentication.
+.Pp
.It Cm ChallengeResponseAuthentication
Specifies whether challenge-response authentication is allowed (e.g. via
PAM or through authentication styles supported in
@@ -454,16 +454,21 @@ The default is
indicating not to
.Xr chroot 2 .
.It Cm Ciphers
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the ciphers allowed.
Multiple ciphers must be comma-separated.
If the specified value begins with a
.Sq +
-character, then the specified ciphers will be appended to the default set
+character, then the specified ciphers will be appended to the built-in default set
instead of replacing them.
If the specified value begins with a
.Sq -
character, then the specified ciphers (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in default set instead of replacing them.
.Pp
The supported ciphers are:
.Pp
@@ -490,13 +495,6 @@ aes256-gcm@openssh.com
chacha20-poly1305@openssh.com
.El
.Pp
-The default is:
-.Bd -literal -offset indent
-chacha20-poly1305@openssh.com,
-aes128-ctr,aes192-ctr,aes256-ctr,
-aes128-gcm@openssh.com,aes256-gcm@openssh.com
-.Ed
-.Pp
The list of available ciphers may also be obtained using
.Qq ssh -Q cipher .
.It Cm ClientAliveCountMax
@@ -688,6 +686,11 @@ For this to work
.Cm GSSAPIKeyExchange
needs to be enabled in the server and also used by the client.
.It Cm GSSAPIKexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
The list of key exchange algorithms that are accepted by GSSAPI
key exchange. Possible values are
.Bd -literal -offset 3n
@@ -700,8 +703,6 @@ gss-nistp256-sha256-,
gss-curve25519-sha256-
.Ed
.Pp
-The default is
-.Dq gss-group14-sha256-,gss-group16-sha512-,gss-nistp256-sha256-,gss-curve25519-sha256-,gss-group14-sha1-,gss-gex-sha1- .
This option only applies to connections using GSSAPI.
.It Cm HostbasedAcceptedKeyTypes
Specifies the key types that will be accepted for hostbased authentication
@@ -791,19 +791,13 @@ is specified, the location of the socket
.Ev SSH_AUTH_SOCK
environment variable.
.It Cm HostKeyAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the host key algorithms
that the server offers.
-The default for this option is:
-.Bd -literal -offset 3n
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-ssh-ed25519-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,
-ssh-rsa-cert-v01@openssh.com,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
.Pp
The list of available key types may also be obtained using
.Qq ssh -Q key .
@@ -922,16 +916,21 @@ Specifies whether to look at .k5login fi
The default is
.Cm yes .
.It Cm KexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the available KEX (Key Exchange) algorithms.
Multiple algorithms must be comma-separated.
Alternately if the specified value begins with a
.Sq +
-character, then the specified methods will be appended to the default set
+character, then the specified methods will be appended to the built-in default set
instead of replacing them.
If the specified value begins with a
.Sq -
character, then the specified methods (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in default set instead of replacing them.
The supported algorithms are:
.Pp
.Bl -item -compact -offset indent
@@ -961,15 +960,6 @@ ecdh-sha2-nistp384
ecdh-sha2-nistp521
.El
.Pp
-The default is:
-.Bd -literal -offset indent
-curve25519-sha256,curve25519-sha256@libssh.org,
-ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
-diffie-hellman-group-exchange-sha256,
-diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256,diffie-hellman-group14-sha1
-.Ed
-.Pp
The list of available key exchange algorithms may also be obtained using
.Qq ssh -Q kex .
.It Cm ListenAddress
@@ -1038,17 +1028,22 @@ DEBUG and DEBUG1 are equivalent.
DEBUG2 and DEBUG3 each specify higher levels of debugging output.
Logging with a DEBUG level violates the privacy of users and is not recommended.
.It Cm MACs
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the available MAC (message authentication code) algorithms.
The MAC algorithm is used for data integrity protection.
Multiple algorithms must be comma-separated.
If the specified value begins with a
.Sq +
-character, then the specified algorithms will be appended to the default set
+character, then the specified algorithms will be appended to the built-in default set
instead of replacing them.
If the specified value begins with a
.Sq -
character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in default set instead of replacing them.
.Pp
The algorithms that contain
.Qq -etm
@@ -1091,15 +1086,6 @@ umac-64-etm@openssh.com
umac-128-etm@openssh.com
.El
.Pp
-The default is:
-.Bd -literal -offset indent
-umac-64-etm@openssh.com,umac-128-etm@openssh.com,
-hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
-hmac-sha1-etm@openssh.com,
-umac-64@openssh.com,umac-128@openssh.com,
-hmac-sha2-256,hmac-sha2-512,hmac-sha1
-.Ed
-.Pp
The list of available MAC algorithms may also be obtained using
.Qq ssh -Q mac .
.It Cm Match
@@ -1446,27 +1432,21 @@ or equivalent.)
The default is
.Cm yes .
.It Cm PubkeyAcceptedKeyTypes
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the current defaults and how to modify them, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
Specifies the key types that will be accepted for public key authentication
as a list of comma-separated patterns.
Alternately if the specified value begins with a
.Sq +
-character, then the specified key types will be appended to the default set
+character, then the specified key types will be appended to the built-in default set
instead of replacing them.
If the specified value begins with a
.Sq -
character, then the specified key types (including wildcards) will be removed
-from the default set instead of replacing them.
-The default for this option is:
-.Bd -literal -offset 3n
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-ssh-ed25519-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,
-ssh-rsa-cert-v01@openssh.com,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
+from the built-in default set instead of replacing them.
.Pp
The list of available key types may also be obtained using
.Qq ssh -Q key .