--- mt-st-0.8/stinit.def.examples.configfiles 2002-09-23 19:02:21.000000000 +0200
+++ mt-st-0.8/stinit.def.examples 2005-04-07 08:21:01.732633520 +0200
@@ -56,3 +56,169 @@
mode3 blocksize=0 density=1 # 800 bpi
}
+# DLT2000 / 2000XT
+manufacturer="QUANTUM" model = "DLT2000" {
+scsi2logical=1
+can-bsr
+auto-lock=0
+two-fms=0
+drive-buffering=1
+buffer-writes
+read-ahead=1
+async-writes=1
+can-partitions=0
+fast-mteom=1
+#
+# If your stinit supports the timeouts:
+timeout=3600 # 1 hour
+long-timeout=14400 # 4 hours
+#
+mode1 blocksize=0 density=0x81 # 10GB + compression on DLTtape III, 15+ with DLTtape IIIXT in 2000XT
+mode2 blocksize=0 density=0x80 # 10GB, no compression on DLTtape III, 15 with DLTtape IIIXT in 2000XT
+mode3 blocksize=0 density=0x18 # 6GB, compression not available, on DLTtape III
+mode4 blocksize=0 density=0x17 #2.6GB, compression not available, on DLTtape III
+}
+
+# DLT4000
+manufacturer="QUANTUM" model = "DLT4000" {
+scsi2logical=1
+can-bsr
+auto-lock=0
+two-fms=0
+drive-buffering=1
+buffer-writes
+read-ahead=1
+async-writes=1
+can-partitions=0
+fast-mteom=1
+#
+# If your stinit supports the timeouts:
+timeout=3600 # 1 hour
+long-timeout=14400 # 4 hours
+#
+# Drive is backwards compatible, use older modes (e.g. from above) as required
+mode1 blocksize=0 density=0x83 # 20GB + compression
+mode2 blocksize=0 density=0x82 # 20GB, no compression
+mode3 blocksize=0 density=0x81 # 10GB + compression (DLT2000 mode) with DLTtape III, 15+ with DLTtape IIIXT in 2000XT
+mode4 blocksize=0 density=0x80 # 10GB, no compression (DLT2000 mode) with DLTtape III, 15 with DLTtape IIIXT in 2000XT
+}
+
+# DLT7000
+manufacturer="QUANTUM" model = "DLT7000" {
+scsi2logical=1
+can-bsr
+auto-lock=0
+two-fms=0
+drive-buffering=1
+buffer-writes
+read-ahead=1
+async-writes=1
+can-partitions=0
+fast-mteom=1
+#
+# If your stinit supports the timeouts:
+timeout=3600 # 1 hour
+long-timeout=14400 # 4 hours
+#
+# Drive is backwards compatible, use older modes (e.g. from above) as required.
+mode1 blocksize=0 density=0x85 # 35GB + compression
+mode2 blocksize=0 density=0x84 # 35GB, no compression
+mode3 blocksize=0 density=0x83 # 20GB + compression (DLT4000 mode)
+mode4 blocksize=0 density=0x82 # 20GB, no compression (DLT4000 mode)
+}
+
+# DLT8000
+manufacturer="QUANTUM" model = "DLT8000" {
+scsi2logical=1
+can-bsr=1
+auto-lock=0
+two-fms=0
+drive-buffering=1
+buffer-writes
+read-ahead=1
+async-writes=1
+can-partitions=0
+fast-mteom=1
+#
+# If your stinit supports the timeouts:
+timeout=3600 # 1 hour
+long-timeout=14400 # 4 hours
+#
+# Drive is backwards compatible to DLT7000, use older modes (e.g. from above) as required. Modes <10GB (<0x19) not supported!
+mode1 blocksize=0 density=0x89 # 40GB + compression
+mode2 blocksize=0 density=0x88 # 40GB, no compression
+mode3 blocksize=0 density=0x85 # 35GB + compression (DLT7000 mode)
+mode4 blocksize=0 density=0x84 # 35GB, no compression (DLT7000 mode)
+}
+
+
+# SDLT220
+manufacturer="QUANTUM" model = "SuperDLT1" {
+scsi2logical=1
+can-bsr=1
+auto-lock=0
+two-fms=0
+drive-buffering=1
+buffer-writes
+read-ahead=1
+async-writes=1
+can-partitions=0
+fast-mteom=1
+#
+# If your stinit supports the timeouts:
+timeout=3600 # 1 hour
+long-timeout=14400 # 4 hours
+#
+# Drive is backwards read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so no need to define any other modes here.
+mode1 blocksize=0 density=0x48 compression=1 # 110 GB + compression
+mode2 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression
+}
+
+# SDLT320
+manufacturer="QUANTUM" model = "SDLT320" {
+scsi2logical=1
+can-bsr=1
+auto-lock=0
+two-fms=0
+drive-buffering=1
+buffer-writes
+read-ahead=1
+async-writes=1
+can-partitions=0
+fast-mteom=1
+#
+# If your stinit supports the timeouts:
+timeout=3600 # 1 hour
+long-timeout=14400 # 4 hours
+#
+# Drive is backwards write compatible to SDLT220 and read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so we need only the SDL220/320 modes here
+mode1 blocksize=0 density=0x49 compression=1 # 160 GB + compression
+mode2 blocksize=0 density=0x49 compression=0 # 160 GB, no ompression
+mode3 blocksize=0 density=0x48 compression=1 # 110 GB + compression
+mode4 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression
+}
+
+# SDLT600
+manufacturer="QUANTUM" model = "SDLT600" {
+scsi2logical=1
+can-bsr=1
+auto-lock=0
+two-fms=0
+drive-buffering=1
+buffer-writes
+read-ahead=1
+async-writes=1
+can-partitions=0
+fast-mteom=1
+#
+# If your stinit supports the timeouts:
+timeout=3600 # 1 hour
+long-timeout=14400 # 4 hours
+#
+# Drive is backwards read compatible to SDLT220/320 and VS160. Mode settings are only required for writing, so we need only the native SDLT600 mode here.
+mode1 blocksize=0 density=0x4a compression=1 # 300 GB + compression
+mode2 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression
+mode3 blocksize=0 density=0x4a compression=1 # 300 GB + compression
+mode4 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression
+}
+