Blob Blame History Raw
From b4bd8040f471c245455a66c32c8979d3262faa2f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Nikola=20Forr=C3=B3?= <nforro@redhat.com>
Date: Wed, 22 Aug 2018 11:11:05 +0200
Subject: [PATCH 3/3] perf_event_open.2: sync with upstream

---
 man-pages/man2/perf_event_open.2 | 2448 +++++++++++++++++++++++-------
 1 file changed, 1861 insertions(+), 587 deletions(-)

diff --git a/man-pages/man2/perf_event_open.2 b/man-pages/man2/perf_event_open.2
index 2ab3eb9..0f29d96 100644
--- a/man-pages/man2/perf_event_open.2
+++ b/man-pages/man2/perf_event_open.2
@@ -24,19 +24,19 @@
 .\" This document is based on the perf_event.h header file, the
 .\" tools/perf/design.txt file, and a lot of bitter experience.
 .\"
-.TH PERF_EVENT_OPEN 2 2013-07-16 "Linux" "Linux Programmer's Manual"
+.TH PERF_EVENT_OPEN 2 2018-02-02 "Linux" "Linux Programmer's Manual"
 .SH NAME
 perf_event_open \- set up performance monitoring
 .SH SYNOPSIS
 .nf
 .B #include <linux/perf_event.h>
 .B #include <linux/hw_breakpoint.h>
-.sp
+.PP
 .BI "int perf_event_open(struct perf_event_attr *" attr ,
 .BI "                    pid_t " pid ", int " cpu ", int " group_fd ,
 .BI "                    unsigned long " flags  );
 .fi
-
+.PP
 .IR Note :
 There is no glibc wrapper for this system call; see NOTES.
 .SH DESCRIPTION
@@ -56,7 +56,7 @@ to measure multiple events simultaneously.
 Events can be enabled and disabled in two ways: via
 .BR ioctl (2)
 and via
-.BR prctl (2) .
+.BR prctl (2).
 When an event is disabled it does not count or generate overflows but does
 continue to exist and maintain its count value.
 .PP
@@ -72,58 +72,48 @@ A
 .I sampling
 event periodically writes measurements to a buffer that can then
 be accessed via
-.BR  mmap (2) .
+.BR mmap (2).
 .SS Arguments
-.P
-The argument
-.I pid
-allows events to be attached to processes in various ways.
-If
-.I pid
-is 0, measurements happen on the current thread, if
-.I pid
-is greater than 0, the process indicated by
-.I pid
-is measured, and if
-.I pid
-is \-1, all processes are counted.
-
+.PP
 The
-.I cpu
-argument allows measurements to be specific to a CPU.
-If
-.I cpu
-is greater than or equal to 0,
-measurements are restricted to the specified CPU;
-if
-.I cpu
-is \-1, the events are measured on all CPUs.
-.P
-Note that the combination of
-.IR pid " == \-1"
-and
-.IR cpu " == \-1"
-is not valid.
-.P
-A
-.IR pid " > 0"
-and
-.IR cpu " == \-1"
-setting measures per-process and follows that process to whatever CPU the
-process gets scheduled to.
-Per-process events can be created by any user.
-.P
-A
-.IR pid " == \-1"
+.I pid
 and
-.IR cpu " >= 0"
-setting is per-CPU and measures all processes on the specified CPU.
-Per-CPU events need the
+.I cpu
+arguments allow specifying which process and CPU to monitor:
+.TP
+.BR "pid == 0" " and " "cpu == \-1"
+This measures the calling process/thread on any CPU.
+.TP
+.BR "pid == 0" " and " "cpu >= 0"
+This measures the calling process/thread only
+when running on the specified CPU.
+.TP
+.BR "pid > 0" " and " "cpu == \-1"
+This measures the specified process/thread on any CPU.
+.TP
+.BR "pid > 0" " and " "cpu >= 0"
+This measures the specified process/thread only
+when running on the specified CPU.
+.TP
+.BR "pid == \-1" " and " "cpu >= 0"
+This measures all processes/threads on the specified CPU.
+This requires
 .B CAP_SYS_ADMIN
 capability or a
 .I /proc/sys/kernel/perf_event_paranoid
 value of less than 1.
-.P
+.TP
+.BR "pid == \-1" " and " "cpu == \-1"
+This setting is invalid and will return an error.
+.PP
+When
+.I pid
+is greater than zero, permission to perform this system call
+is governed by a ptrace access mode
+.B PTRACE_MODE_READ_REALCREDS
+check; see
+.BR ptrace (2).
+.PP
 The
 .I group_fd
 argument allows event groups to be created.
@@ -134,7 +124,7 @@ The rest of the group members are created with subsequent
 .BR perf_event_open ()
 calls with
 .IR group_fd
-being set to the fd of the group leader.
+being set to the file descriptor of the group leader.
 (A single event on its own is created with
 .IR group_fd " = \-1"
 and is considered to be a group with only 1 member.)
@@ -142,29 +132,51 @@ An event group is scheduled onto the CPU as a unit: it will
 be put onto the CPU only if all of the events in the group can be put onto
 the CPU.
 This means that the values of the member events can be
-meaningfully compared, added, divided (to get ratios), etc., with each
+meaningfully compared\(emadded, divided (to get ratios), and so on\(emwith each
 other, since they have counted events for the same set of executed
 instructions.
-.P
+.PP
 The
 .I flags
 argument is formed by ORing together zero or more of the following values:
 .TP
+.BR PERF_FLAG_FD_CLOEXEC " (since Linux 3.14)"
+.\" commit a21b0b354d4ac39be691f51c53562e2c24443d9e
+This flag enables the close-on-exec flag for the created
+event file descriptor,
+so that the file descriptor is automatically closed on
+.BR execve (2).
+Setting the close-on-exec flags at creation time, rather than later with
+.BR fcntl (2),
+avoids potential race conditions where the calling thread invokes
+.BR perf_event_open ()
+and
+.BR fcntl (2)
+at the same time as another thread calls
+.BR fork (2)
+then
+.BR execve (2).
+.TP
 .BR PERF_FLAG_FD_NO_GROUP
-.\" FIXME The following sentence is unclear
-This flag allows creating an event as part of an event group but
-having no group leader.
-It is unclear why this is useful.
-.\" FIXME So, why is it useful?
+This flag tells the event to ignore the
+.IR group_fd
+parameter except for the purpose of setting up output redirection
+using the
+.B PERF_FLAG_FD_OUTPUT
+flag.
 .TP
-.BR PERF_FLAG_FD_OUTPUT
-This flag re-routes the output from an event to the group leader.
+.BR PERF_FLAG_FD_OUTPUT " (broken since Linux 2.6.35)"
+.\" commit ac9721f3f54b27a16c7e1afb2481e7ee95a70318
+This flag re-routes the event's sampled output to instead
+be included in the mmap buffer of the event specified by
+.IR group_fd .
 .TP
-.BR PERF_FLAG_PID_CGROUP " (Since Linux 2.6.39)."
+.BR PERF_FLAG_PID_CGROUP " (since Linux 2.6.39)"
+.\" commit e5d1367f17ba6a6fed5fd8b74e4d5720923e0c25
 This flag activates per-container system-wide monitoring.
 A container
-is an abstraction that isolates a set of resources for finer grain
-control (CPUs, memory, etc...).
+is an abstraction that isolates a set of resources for finer-grained
+control (CPUs, memory, etc.).
 In this mode, the event is measured
 only if the thread running on the monitored CPU belongs to the designated
 container (cgroup).
@@ -182,52 +194,58 @@ must be passed as the
 parameter.
 cgroup monitoring is available only
 for system-wide events and may therefore require extra permissions.
-.P
+.PP
 The
 .I perf_event_attr
 structure provides detailed configuration information
 for the event being created.
-
+.PP
 .in +4n
-.nf
+.EX
 struct perf_event_attr {
-    __u32     type;         /* Type of event */
-    __u32     size;         /* Size of attribute structure */
-    __u64     config;       /* Type-specific configuration */
+    __u32 type;                 /* Type of event */
+    __u32 size;                 /* Size of attribute structure */
+    __u64 config;               /* Type-specific configuration */
 
     union {
         __u64 sample_period;    /* Period of sampling */
         __u64 sample_freq;      /* Frequency of sampling */
     };
 
-    __u64     sample_type;  /* Specifies values included in sample */
-    __u64     read_format;  /* Specifies values returned in read */
-
-    __u64     disabled       : 1,   /* off by default */
-              inherit        : 1,   /* children inherit it */
-              pinned         : 1,   /* must always be on PMU */
-              exclusive      : 1,   /* only group on PMU */
-              exclude_user   : 1,   /* don't count user */
-              exclude_kernel : 1,   /* don't count kernel */
-              exclude_hv     : 1,   /* don't count hypervisor */
-              exclude_idle   : 1,   /* don't count when idle */
-              mmap           : 1,   /* include mmap data */
-              comm           : 1,   /* include comm data */
-              freq           : 1,   /* use freq, not period */
-              inherit_stat   : 1,   /* per task counts */
-              enable_on_exec : 1,   /* next exec enables */
-              task           : 1,   /* trace fork/exit */
-              watermark      : 1,   /* wakeup_watermark */
-              precise_ip     : 2,   /* skid constraint */
-              mmap_data      : 1,   /* non-exec mmap data */
-              sample_id_all  : 1,   /* sample_type all events */
-              exclude_host   : 1,   /* don't count in host */
-              exclude_guest  : 1,   /* don't count in guest */
-              exclude_callchain_kernel : 1,
-                                    /* exclude kernel callchains */
-              exclude_callchain_user   : 1,
-	                            /* exclude user callchains */
-              __reserved_1   : 41;
+    __u64 sample_type;  /* Specifies values included in sample */
+    __u64 read_format;  /* Specifies values returned in read */
+
+    __u64 disabled       : 1,   /* off by default */
+          inherit        : 1,   /* children inherit it */
+          pinned         : 1,   /* must always be on PMU */
+          exclusive      : 1,   /* only group on PMU */
+          exclude_user   : 1,   /* don't count user */
+          exclude_kernel : 1,   /* don't count kernel */
+          exclude_hv     : 1,   /* don't count hypervisor */
+          exclude_idle   : 1,   /* don't count when idle */
+          mmap           : 1,   /* include mmap data */
+          comm           : 1,   /* include comm data */
+          freq           : 1,   /* use freq, not period */
+          inherit_stat   : 1,   /* per task counts */
+          enable_on_exec : 1,   /* next exec enables */
+          task           : 1,   /* trace fork/exit */
+          watermark      : 1,   /* wakeup_watermark */
+          precise_ip     : 2,   /* skid constraint */
+          mmap_data      : 1,   /* non-exec mmap data */
+          sample_id_all  : 1,   /* sample_type all events */
+          exclude_host   : 1,   /* don't count in host */
+          exclude_guest  : 1,   /* don't count in guest */
+          exclude_callchain_kernel : 1,
+                                /* exclude kernel callchains */
+          exclude_callchain_user   : 1,
+                                /* exclude user callchains */
+          mmap2          :  1,  /* include mmap with inode data */
+          comm_exec      :  1,  /* flag comm events that are
+                                   due to exec */
+          use_clockid    :  1,  /* use clockid for time fields */
+          context_switch :  1,  /* context switch data */
+
+          __reserved_1   : 37;
 
     union {
         __u32 wakeup_events;    /* wakeup every n events */
@@ -238,23 +256,31 @@ struct perf_event_attr {
 
     union {
         __u64 bp_addr;          /* breakpoint address */
+        __u64 kprobe_func;      /* for perf_kprobe */
+        __u64 uprobe_path;      /* for perf_uprobe */
         __u64 config1;          /* extension of config */
     };
 
     union {
         __u64 bp_len;           /* breakpoint length */
+        __u64 kprobe_addr;      /* with kprobe_func == NULL */
+        __u64 probe_offset;     /* for perf_[k,u]probe */
         __u64 config2;          /* extension of config1 */
     };
-    __u64   branch_sample_type; /* enum perf_branch_sample_type */
-    __u64   sample_regs_user;   /* user regs to dump on samples */
-    __u32   sample_stack_user;  /* size of stack to dump on
+    __u64 branch_sample_type;   /* enum perf_branch_sample_type */
+    __u64 sample_regs_user;     /* user regs to dump on samples */
+    __u32 sample_stack_user;    /* size of stack to dump on
                                    samples */
-    __u32   __reserved_2;       /* Align to u64 */
+    __s32 clockid;              /* clock to use for time fields */
+    __u64 sample_regs_intr;     /* regs to dump on samples */
+    __u32 aux_watermark;        /* aux bytes before wakeup */
+    __u16 sample_max_stack;     /* max frames in callchain */
+    __u16 __reserved_2;         /* align to u64 */
 
 };
-.fi
+.EE
 .in
-
+.PP
 The fields of the
 .I perf_event_attr
 structure are described in more detail below:
@@ -289,13 +315,15 @@ field definition.
 This indicates a "raw" implementation-specific event in the
 .IR config " field."
 .TP
-.BR PERF_TYPE_BREAKPOINT " (Since Linux 2.6.33)"
+.BR PERF_TYPE_BREAKPOINT " (since Linux 2.6.33)"
+.\" commit 24f1e32c60c45c89a997c73395b69c8af6f0a84e
 This indicates a hardware breakpoint as provided by the CPU.
 Breakpoints can be read/write accesses to an address as well as
 execution of an instruction address.
 .TP
 .RB "dynamic PMU"
-Since Linux 2.6.39,
+Since Linux 2.6.38,
+.\" commit 2e80a82a49c4c7eca4e35734380f28298ba5db19
 .BR perf_event_open ()
 can support multiple PMUs.
 To enable this, a value exported by the kernel can be used in the
@@ -304,7 +332,7 @@ field to indicate which PMU to use.
 The value to use can be found in the sysfs filesystem:
 there is a subdirectory per PMU instance under
 .IR /sys/bus/event_source/devices .
-In each sub-directory there is a
+In each subdirectory there is a
 .I type
 file whose content is an integer that can be used in the
 .I type
@@ -312,6 +340,17 @@ field.
 For instance,
 .I /sys/bus/event_source/devices/cpu/type
 contains the value for the core CPU PMU, which is usually 4.
+.TP
+.BR kprobe " and " uprobe " (since Linux 4.17)"
+.\" commit 65074d43fc77bcae32776724b7fa2696923c78e4
+.\" commit e12f03d7031a977356e3d7b75a68c2185ff8d155
+.\" commit 33ea4b24277b06dbc55d7f5772a46f029600255e
+These two dynamic PMUs create a kprobe/uprobe and attach it to the
+file descriptor generated by perf_event_open.
+The kprobe/uprobe will be destroyed on the destruction of the file descriptor.
+See fields
+.IR kprobe_func ", " uprobe_path ", " kprobe_addr ", and " probe_offset
+for more details.
 .RE
 .TP
 .I "size"
@@ -322,21 +361,36 @@ Set this using
 .I sizeof(struct perf_event_attr)
 to allow the kernel to see
 the struct size at the time of compilation.
-
+.IP
 The related define
 .B PERF_ATTR_SIZE_VER0
 is set to 64; this was the size of the first published struct.
 .B PERF_ATTR_SIZE_VER1
 is 72, corresponding to the addition of breakpoints in Linux 2.6.33.
+.\" commit cb5d76999029ae7a517cb07dfa732c1b5a934fc2
+.\" this was added much later when PERF_ATTR_SIZE_VER2 happened
+.\" but the actual attr_size had increased in 2.6.33
 .B PERF_ATTR_SIZE_VER2
 is 80 corresponding to the addition of branch sampling in Linux 3.4.
-.B PERF_ATR_SIZE_VER3
+.\" commit cb5d76999029ae7a517cb07dfa732c1b5a934fc2
+.B PERF_ATTR_SIZE_VER3
 is 96 corresponding to the addition
 of
 .I sample_regs_user
 and
 .I sample_stack_user
 in Linux 3.7.
+.\" commit 1659d129ed014b715b0b2120e6fd929bdd33ed03
+.B PERF_ATTR_SIZE_VER4
+is 104 corresponding to the addition of
+.I sample_regs_intr
+in Linux 3.19.
+.\" commit 60e2364e60e86e81bc6377f49779779e6120977f
+.B PERF_ATTR_SIZE_VER5
+is 112 corresponding to the addition of
+.I aux_watermark
+in Linux 4.1.
+.\" commit 1a5941312414c71dece6717da9a0fa1303127afa
 .TP
 .I "config"
 This specifies which event you want, in conjunction with
@@ -348,13 +402,7 @@ The
 fields are also taken into account in cases where 64 bits is not
 enough to fully specify the event.
 The encoding of these fields are event dependent.
-
-The most significant bit (bit 63) of
-.I config
-signifies CPU-specific (raw) counter configuration data;
-if the most significant bit is unset, the next 7 bits are an event
-type and the rest of the bits are the event identifier.
-
+.IP
 There are various ways to set the
 .I config
 field that are dependent on the value of the previously
@@ -365,7 +413,7 @@ What follows are various possible settings for
 .I config
 separated out by
 .IR type .
-
+.IP
 If
 .I type
 is
@@ -379,12 +427,12 @@ to one of the following:
 .TP
 .B PERF_COUNT_HW_CPU_CYCLES
 Total cycles.
-Be wary of what happens during CPU frequency scaling
+Be wary of what happens during CPU frequency scaling.
 .TP
 .B PERF_COUNT_HW_INSTRUCTIONS
 Retired instructions.
 Be careful, these can be affected by various
-issues, most notably hardware interrupt counts
+issues, most notably hardware interrupt counts.
 .TP
 .B PERF_COUNT_HW_CACHE_REFERENCES
 Cache accesses.
@@ -402,8 +450,9 @@ event to calculate cache miss rates.
 .TP
 .B PERF_COUNT_HW_BRANCH_INSTRUCTIONS
 Retired branch instructions.
-Prior to Linux 2.6.34, this used
+Prior to Linux 2.6.35, this used
 the wrong event on AMD processors.
+.\" commit f287d332ce835f77a4f5077d2c0ef1e3f9ea42d2
 .TP
 .B PERF_COUNT_HW_BRANCH_MISSES
 Mispredicted branch instructions.
@@ -411,13 +460,16 @@ Mispredicted branch instructions.
 .B PERF_COUNT_HW_BUS_CYCLES
 Bus cycles, which can be different from total cycles.
 .TP
-.BR PERF_COUNT_HW_STALLED_CYCLES_FRONTEND " (Since Linux 3.0)"
+.BR PERF_COUNT_HW_STALLED_CYCLES_FRONTEND " (since Linux 3.0)"
+.\" commit 8f62242246351b5a4bc0c1f00c0c7003edea128a
 Stalled cycles during issue.
 .TP
-.BR PERF_COUNT_HW_STALLED_CYCLES_BACKEND  " (Since Linux 3.0)"
+.BR PERF_COUNT_HW_STALLED_CYCLES_BACKEND  " (since Linux 3.0)"
+.\" commit 8f62242246351b5a4bc0c1f00c0c7003edea128a
 Stalled cycles during retirement.
 .TP
-.BR PERF_COUNT_HW_REF_CPU_CYCLES  " (Since Linux 3.3)"
+.BR PERF_COUNT_HW_REF_CPU_CYCLES  " (since Linux 3.3)"
+.\" commit c37e17497e01fc0f5d2d6feb5723b210b3ab8890
 Total cycles; not affected by CPU frequency scaling.
 .RE
 .IP
@@ -444,6 +496,7 @@ This reports the number of page faults.
 This counts context switches.
 Until Linux 2.6.34, these were all reported as user-space
 events, after that they are reported as happening in the kernel.
+.\" commit e49a5bd38159dfb1928fd25b173bc9de4bbadb21
 .TP
 .B PERF_COUNT_SW_CPU_MIGRATIONS
 This reports the number of times the process
@@ -457,19 +510,29 @@ These did not require disk I/O to handle.
 This counts the number of major page faults.
 These required disk I/O to handle.
 .TP
-.BR PERF_COUNT_SW_ALIGNMENT_FAULTS " (Since Linux 2.6.33)"
+.BR PERF_COUNT_SW_ALIGNMENT_FAULTS " (since Linux 2.6.33)"
+.\" commit f7d7986060b2890fc26db6ab5203efbd33aa2497
 This counts the number of alignment faults.
 These happen when unaligned memory accesses happen; the kernel
 can handle these but it reduces performance.
 This happens only on some architectures (never on x86).
 .TP
-.BR PERF_COUNT_SW_EMULATION_FAULTS " (Since Linux 2.6.33)"
+.BR PERF_COUNT_SW_EMULATION_FAULTS " (since Linux 2.6.33)"
+.\" commit f7d7986060b2890fc26db6ab5203efbd33aa2497
 This counts the number of emulation faults.
 The kernel sometimes traps on unimplemented instructions
 and emulates them for user space.
 This can negatively impact performance.
+.TP
+.BR PERF_COUNT_SW_DUMMY " (since Linux 3.12)"
+.\" commit fa0097ee690693006ab1aea6c01ad3c851b65c77
+This is a placeholder event that counts nothing.
+Informational sample record types such as mmap or comm
+must be associated with an active event.
+This dummy event allows gathering such records without requiring
+a counting event.
 .RE
-
+.PP
 .RS
 If
 .I type
@@ -482,7 +545,7 @@ can be obtained from under debugfs
 .I tracing/events/*/*/id
 if ftrace is enabled in the kernel.
 .RE
-
+.PP
 .RS
 If
 .I type
@@ -492,13 +555,13 @@ then we are measuring a hardware CPU cache event.
 To calculate the appropriate
 .I config
 value use the following equation:
+.PP
 .RS 4
 .nf
-
     (perf_hw_cache_id) | (perf_hw_cache_op_id << 8) |
     (perf_hw_cache_op_result_id << 16)
 .fi
-.P
+.PP
 where
 .I perf_hw_cache_id
 is one of:
@@ -522,13 +585,14 @@ for measuring the Instruction TLB
 .B PERF_COUNT_HW_CACHE_BPU
 for measuring the branch prediction unit
 .TP
-.BR PERF_COUNT_HW_CACHE_NODE " (Since Linux 3.0)"
+.BR PERF_COUNT_HW_CACHE_NODE " (since Linux 3.1)"
+.\" commit 89d6c0b5bdbb1927775584dcf532d98b3efe1477
 for measuring local memory accesses
 .RE
-.P
+.PP
 and
 .I perf_hw_cache_op_id
-is one of
+is one of:
 .RS 4
 .TP
 .B PERF_COUNT_HW_CACHE_OP_READ
@@ -540,10 +604,10 @@ for write accesses
 .B PERF_COUNT_HW_CACHE_OP_PREFETCH
 for prefetch accesses
 .RE
-.P
+.PP
 and
 .I perf_hw_cache_op_result_id
-is one of
+is one of:
 .RS 4
 .TP
 .B PERF_COUNT_HW_CACHE_RESULT_ACCESS
@@ -553,7 +617,7 @@ to measure accesses
 to measure misses
 .RE
 .RE
-
+.PP
 If
 .I type
 is
@@ -569,7 +633,7 @@ The libpfm4 library can be used to translate from the name in the
 architectural manuals to the raw hex value
 .BR perf_event_open ()
 expects in this field.
-
+.PP
 If
 .I type
 is
@@ -578,23 +642,63 @@ then leave
 .I config
 set to zero.
 Its parameters are set in other places.
+.PP
+If
+.I type
+is
+.BR kprobe
+or
+.BR uprobe ,
+set
+.IR retprobe
+(bit 0 of
+.IR config ,
+see
+.IR /sys/bus/event_source/devices/[k,u]probe/format/retprobe )
+for kretprobe/uretprobe.
+See fields
+.IR kprobe_func ", " uprobe_path ", " kprobe_addr ", and " probe_offset
+for more details.
 .RE
 .TP
+.IR kprobe_func ", " uprobe_path ", " kprobe_addr ", and " probe_offset
+These fields describe the kprobe/uprobe for dynamic PMUs
+.BR kprobe
+and
+.BR uprobe .
+For
+.BR kprobe :
+use
+.I kprobe_func
+and
+.IR probe_offset ,
+or use
+.I kprobe_addr
+and leave
+.I kprobe_func
+as NULL.
+For
+.BR uprobe :
+use
+.I uprobe_path
+and
+.IR probe_offset .
+.TP
 .IR sample_period ", " sample_freq
-A "sampling" counter is one that generates an interrupt
+A "sampling" event is one that generates an overflow notification
 every N events, where N is given by
 .IR sample_period .
-A sampling counter has
+A sampling event has
 .IR sample_period " > 0."
-When an overflow interrupt occurs, requested data is recorded
+When an overflow occurs, requested data is recorded
 in the mmap buffer.
 The
 .I sample_type
-field controls what data is recorded on each interrupt.
-
+field controls what data is recorded on each overflow.
+.IP
 .I sample_freq
 can be used if you wish to use frequency rather than period.
-In this case you set the
+In this case, you set the
 .I freq
 flag.
 The kernel will adjust the sampling period
@@ -647,39 +751,106 @@ Records a unique ID for the opened event.
 Unlike
 .B PERF_SAMPLE_ID
 the actual ID is returned, not the group leader.
-This ID is the same as the one returned by PERF_FORMAT_ID.
+This ID is the same as the one returned by
+.BR PERF_FORMAT_ID .
 .TP
 .B PERF_SAMPLE_RAW
 Records additional data, if applicable.
 Usually returned by tracepoint events.
 .TP
-.BR PERF_SAMPLE_BRANCH_STACK " (Since Linux 3.4)"
+.BR PERF_SAMPLE_BRANCH_STACK " (since Linux 3.4)"
+.\" commit bce38cd53e5ddba9cb6d708c4ef3d04a4016ec7e
 This provides a record of recent branches, as provided
 by CPU branch sampling hardware (such as Intel Last Branch Record).
 Not all hardware supports this feature.
-
+.IP
 See the
 .I branch_sample_type
 field for how to filter which branches are reported.
 .TP
-.BR PERF_SAMPLE_REGS_USER " (Since Linux 3.7)"
+.BR PERF_SAMPLE_REGS_USER " (since Linux 3.7)"
+.\" commit 4018994f3d8785275ef0e7391b75c3462c029e56
 Records the current user-level CPU register state
 (the values in the process before the kernel was called).
 .TP
-.BR PERF_SAMPLE_STACK_USER " (Since Linux 3.7)"
+.BR PERF_SAMPLE_STACK_USER " (since Linux 3.7)"
+.\" commit c5ebcedb566ef17bda7b02686e0d658a7bb42ee7
 Records the user level stack, allowing stack unwinding.
 .TP
-.BR PERF_SAMPLE_WEIGHT " (Since Linux 3.10)"
+.BR PERF_SAMPLE_WEIGHT " (since Linux 3.10)"
+.\" commit c3feedf2aaf9ac8bad6f19f5d21e4ee0b4b87e9c
 Records a hardware provided weight value that expresses how
 costly the sampled event was.
 This allows the hardware to highlight expensive events in
 a profile.
 .TP
-.BR PERF_SAMPLE_DATA_SRC " (Since Linux 3.10)"
+.BR PERF_SAMPLE_DATA_SRC " (since Linux 3.10)"
+.\" commit d6be9ad6c960f43800a6f118932bc8a5a4eadcd1
 Records the data source: where in the memory hierarchy
 the data associated with the sampled instruction came from.
-This is only available if the underlying hardware
+This is available only if the underlying hardware
 supports this feature.
+.TP
+.BR PERF_SAMPLE_IDENTIFIER " (since Linux 3.12)"
+.\" commit ff3d527cebc1fa3707c617bfe9e74f53fcfb0955
+Places the
+.B SAMPLE_ID
+value in a fixed position in the record,
+either at the beginning (for sample events) or at the end
+(if a non-sample event).
+.IP
+This was necessary because a sample stream may have
+records from various different event sources with different
+.I sample_type
+settings.
+Parsing the event stream properly was not possible because the
+format of the record was needed to find
+.BR SAMPLE_ID ,
+but
+the format could not be found without knowing what
+event the sample belonged to (causing a circular
+dependency).
+.IP
+The
+.B PERF_SAMPLE_IDENTIFIER
+setting makes the event stream always parsable
+by putting
+.B SAMPLE_ID
+in a fixed location, even though
+it means having duplicate
+.B SAMPLE_ID
+values in records.
+.TP
+.BR PERF_SAMPLE_TRANSACTION " (since Linux 3.13)"
+.\" commit fdfbbd07e91f8fe387140776f3fd94605f0c89e5
+Records reasons for transactional memory abort events
+(for example, from Intel TSX transactional memory support).
+.IP
+The
+.I precise_ip
+setting must be greater than 0 and a transactional memory abort
+event must be measured or no values will be recorded.
+Also note that some perf_event measurements, such as sampled
+cycle counting, may cause extraneous aborts (by causing an
+interrupt during a transaction).
+.TP
+.BR PERF_SAMPLE_REGS_INTR " (since Linux 3.19)"
+.\" commit 60e2364e60e86e81bc6377f49779779e6120977f
+Records a subset of the current CPU register state
+as specified by
+.IR sample_regs_intr .
+Unlike
+.B PERF_SAMPLE_REGS_USER
+the register values will return kernel register
+state if the overflow happened while kernel
+code is running.
+If the CPU supports hardware sampling of
+register state (i.e., PEBS on Intel x86) and
+.I precise_ip
+is set higher than zero then the register
+values returned are those captured by
+hardware at the time of the sampled
+instruction's retirement.
 .RE
 .TP
 .IR "read_format"
@@ -702,7 +873,7 @@ Adds the 64-bit
 .I time_running
 field.
 This can be used to calculate estimated totals if
-the PMU is overcommitted and  multiplexing is happening.
+the PMU is overcommitted and multiplexing is happening.
 .TP
 .B PERF_FORMAT_ID
 Adds a 64-bit unique value that corresponds to the event group.
@@ -720,6 +891,17 @@ If disabled, the event can later be enabled by
 .BR prctl (2),
 or
 .IR enable_on_exec .
+.IP
+When creating an event group, typically the group leader is initialized
+with
+.I disabled
+set to 1 and any child events are initialized with
+.I disabled
+set to 0.
+Despite
+.I disabled
+being 0, the child events will not start until the group leader
+is enabled.
 .TP
 .IR "inherit"
 The
@@ -729,10 +911,10 @@ tasks as well as the task specified.
 This applies only to new children, not to any existing children at
 the time the counter is created (nor to any new children of
 existing children).
-
+.IP
 Inherit does not work for some combinations of
-.IR read_format s,
-such as
+.IR read_format
+values, such as
 .BR PERF_FORMAT_GROUP .
 .TP
 .IR "pinned"
@@ -756,12 +938,19 @@ it should be the only group using the CPU's counters.
 In the future this may allow monitoring programs to
 support PMU features that need to run alone so that they do not
 disrupt other hardware counters.
+.IP
+Note that many unexpected situations may prevent events with the
+.I exclusive
+bit set from ever running.
+This includes any users running a system-wide
+measurement as well as any kernel use of the performance counters
+(including the commonly enabled NMI Watchdog Timer interface).
 .TP
 .IR "exclude_user"
 If this bit is set, the count excludes events that happen in user space.
 .TP
 .IR "exclude_kernel"
-If this bit is set, the count excludes events that happen in kernel-space.
+If this bit is set, the count excludes events that happen in kernel space.
 .TP
 .IR "exclude_hv"
 If this bit is set, the count excludes events that happen in the
@@ -772,23 +961,42 @@ Extra support is needed for handling hypervisor measurements on most
 machines.
 .TP
 .IR "exclude_idle"
-If set, don't count when the CPU is idle.
+If set, don't count when the CPU is running the idle task.
+While you can currently enable this for any event type, it is ignored
+for all but software events.
 .TP
 .IR "mmap"
 The
 .I mmap
-bit enables recording of exec mmap events.
+bit enables generation of
+.B PERF_RECORD_MMAP
+samples for every
+.BR mmap (2)
+call that has
+.B PROT_EXEC
+set.
+This allows tools to notice new executable code being mapped into
+a program (dynamic shared libraries for example)
+so that addresses can be mapped back to the original code.
 .TP
 .IR "comm"
 The
 .I comm
 bit enables tracking of process command name as modified by the
-.IR exec (2)
+.BR exec (2)
 and
-.IR prctl (PR_SET_NAME)
-system calls.
-Unfortunately for tools,
-there is no way to distinguish one system call versus the other.
+.BR prctl (PR_SET_NAME)
+system calls as well as writing to
+.IR /proc/self/comm .
+If the
+.I comm_exec
+flag is also successfully set (possible since Linux 3.16),
+.\" commit 82b897782d10fcc4930c9d4a15b175348fdd2871
+then the misc flag
+.B PERF_RECORD_MISC_COMM_EXEC
+can be used to differentiate the
+.BR exec (2)
+case from the others.
 .TP
 .IR "freq"
 If this bit is set, then
@@ -814,14 +1022,15 @@ If this bit is set, then
 fork/exit notifications are included in the ring buffer.
 .TP
 .IR "watermark"
-If set, have a sampling interrupt happen when we cross the
+If set, have an overflow notification happen when we cross the
 .I wakeup_watermark
 boundary.
-Otherwise interrupts happen after
+Otherwise, overflow notifications happen after
 .I wakeup_events
 samples.
 .TP
-.IR "precise_ip" " (Since Linux 2.6.35)"
+.IR "precise_ip" " (since Linux 2.6.35)"
+.\" commit ab608344bcbde4f55ec4cd911b686b0ce3eae076
 This controls the amount of skid.
 Skid is how many instructions
 execute between an event of interest happening and the kernel
@@ -830,95 +1039,200 @@ Smaller skid is
 better and allows more accurate reporting of which events
 correspond to which instructions, but hardware is often limited
 with how small this can be.
-
-The values of this are the following:
+.IP
+The possible values of this field are the following:
 .RS
-.TP
-0 -
+.IP 0 3
 .B SAMPLE_IP
-can have arbitrary skid
-.TP
-1 -
+can have arbitrary skid.
+.IP 1
 .B SAMPLE_IP
-must have constant skid
-.TP
-2 -
+must have constant skid.
+.IP 2
 .B SAMPLE_IP
-requested to have 0 skid
-.TP
-3 -
+requested to have 0 skid.
+.IP 3
 .B SAMPLE_IP
 must have 0 skid.
-See also
+See also the description of
 .BR PERF_RECORD_MISC_EXACT_IP .
 .RE
 .TP
-.IR "mmap_data" " (Since Linux 2.6.36)"
-The counterpart of the
+.IR "mmap_data" " (since Linux 2.6.36)"
+.\" commit 3af9e859281bda7eb7c20b51879cf43aa788ac2e
+This is the counterpart of the
 .I mmap
-field, but enables including data mmap events
-in the ring-buffer.
+field.
+This enables generation of
+.B PERF_RECORD_MMAP
+samples for
+.BR mmap (2)
+calls that do not have
+.B PROT_EXEC
+set (for example data and SysV shared memory).
 .TP
-.IR "sample_id_all" " (Since Linux 2.6.38)"
-If set, then TID, TIME, ID, CPU, and STREAM_ID can
+.IR "sample_id_all" " (since Linux 2.6.38)"
+.\" commit c980d1091810df13f21aabbce545fd98f545bbf7
+If set, then TID, TIME, ID, STREAM_ID, and CPU can
 additionally be included in
 .RB non- PERF_RECORD_SAMPLE s
 if the corresponding
 .I sample_type
 is selected.
+.IP
+If
+.B PERF_SAMPLE_IDENTIFIER
+is specified, then an additional ID value is included
+as the last value to ease parsing the record stream.
+This may lead to the
+.I id
+value appearing twice.
+.IP
+The layout is described by this pseudo-structure:
+.IP
+.in +4n
+.EX
+struct sample_id {
+    { u32 pid, tid; }   /* if PERF_SAMPLE_TID set */
+    { u64 time;     }   /* if PERF_SAMPLE_TIME set */
+    { u64 id;       }   /* if PERF_SAMPLE_ID set */
+    { u64 stream_id;}   /* if PERF_SAMPLE_STREAM_ID set  */
+    { u32 cpu, res; }   /* if PERF_SAMPLE_CPU set */
+    { u64 id;       }   /* if PERF_SAMPLE_IDENTIFIER set */
+};
+.EE
+.in
 .TP
-.IR "exclude_host" " (Since Linux 3.2)"
-Do not measure time spent in VM host
-.TP
-.IR "exclude_guest" " (Since Linux 3.2)"
-Do not measure time spent in VM guest
-.TP
-.IR "exclude_callchain_kernel" " (Since Linux 3.7)"
+.IR "exclude_host" " (since Linux 3.2)"
+.\" commit a240f76165e6255384d4bdb8139895fac7988799
+When conducting measurements that include processes running
+VM instances (i.e., have executed a
+.B KVM_RUN
+.BR ioctl (2)),
+only measure events happening inside a guest instance.
+This is only meaningful outside the guests; this setting does
+not change counts gathered inside of a guest.
+Currently, this functionality is x86 only.
+.TP
+.IR "exclude_guest" " (since Linux 3.2)"
+.\" commit a240f76165e6255384d4bdb8139895fac7988799
+When conducting measurements that include processes running
+VM instances (i.e., have executed a
+.B KVM_RUN
+.BR ioctl (2)),
+do not measure events happening inside guest instances.
+This is only meaningful outside the guests; this setting does
+not change counts gathered inside of a guest.
+Currently, this functionality is x86 only.
+.TP
+.IR "exclude_callchain_kernel" " (since Linux 3.7)"
+.\" commit d077526485d5c9b12fe85d0b2b3b7041e6bc5f91
 Do not include kernel callchains.
 .TP
-.IR "exclude_callchain_user" " (Since Linux 3.7)"
+.IR "exclude_callchain_user" " (since Linux 3.7)"
+.\" commit d077526485d5c9b12fe85d0b2b3b7041e6bc5f91
 Do not include user callchains.
 .TP
+.IR "mmap2" " (since Linux 3.16)"
+.\" commit 13d7a2410fa637f450a29ecb515ac318ee40c741
+.\" This is tricky; was committed during 3.12 development
+.\" but right before release was disabled.
+.\" So while you could select mmap2 starting with 3.12
+.\" it did not work until 3.16
+.\" commit a5a5ba72843dd05f991184d6cb9a4471acce1005
+Generate an extended executable mmap record that contains enough
+additional information to uniquely identify shared mappings.
+The
+.I mmap
+flag must also be set for this to work.
+.TP
+.IR "comm_exec" " (since Linux 3.16)"
+.\" commit 82b897782d10fcc4930c9d4a15b175348fdd2871
+This is purely a feature-detection flag, it does not change
+kernel behavior.
+If this flag can successfully be set, then, when
+.I comm
+is enabled, the
+.B PERF_RECORD_MISC_COMM_EXEC
+flag will be set in the
+.I misc
+field of a comm record header if the rename event being
+reported was caused by a call to
+.BR exec (2).
+This allows tools to distinguish between the various
+types of process renaming.
+.TP
+.IR "use_clockid" " (since Linux 4.1)"
+.\" commit 34f439278cef7b1177f8ce24f9fc81dfc6221d3b
+This allows selecting which internal Linux clock to use
+when generating timestamps via the
+.I clockid
+field.
+This can make it easier to correlate perf sample times with
+timestamps generated by other tools.
+.TP
+.IR "context_switch" " (since Linux 4.3)"
+.\" commit 45ac1403f564f411c6a383a2448688ba8dd705a4
+This enables the generation of
+.B PERF_RECORD_SWITCH
+records when a context switch occurs.
+It also enables the generation of
+.B PERF_RECORD_SWITCH_CPU_WIDE
+records when sampling in CPU-wide mode.
+This functionality is in addition to existing tracepoint and
+software events for measuring context switches.
+The advantage of this method is that it will give full
+information even with strict
+.I perf_event_paranoid
+settings.
+.TP
 .IR "wakeup_events" ", " "wakeup_watermark"
 This union sets how many samples
 .RI ( wakeup_events )
 or bytes
 .RI ( wakeup_watermark )
-happen before an overflow signal happens.
+happen before an overflow notification happens.
 Which one is used is selected by the
 .I watermark
-bitflag.
-
+bit flag.
+.IP
 .I wakeup_events
-only counts
+counts only
 .B PERF_RECORD_SAMPLE
 record types.
-To  receive a signal for every incoming
+To receive overflow notification for all
 .B PERF_RECORD
-type set
+types choose watermark and set
 .I wakeup_watermark
 to 1.
+.IP
+Prior to Linux 3.0, setting
+.\" commit f506b3dc0ec454a16d40cab9ee5d75435b39dc50
+.I wakeup_events
+to 0 resulted in no overflow notifications;
+more recent kernels treat 0 the same as 1.
 .TP
-.IR "bp_type" " (Since Linux 2.6.33)"
+.IR "bp_type" " (since Linux 2.6.33)"
+.\" commit 24f1e32c60c45c89a997c73395b69c8af6f0a84e
 This chooses the breakpoint type.
 It is one of:
 .RS
 .TP
 .BR HW_BREAKPOINT_EMPTY
-no breakpoint
+No breakpoint.
 .TP
 .BR HW_BREAKPOINT_R
-count when we read the memory location
+Count when we read the memory location.
 .TP
 .BR HW_BREAKPOINT_W
-count when we write the memory location
+Count when we write the memory location.
 .TP
 .BR HW_BREAKPOINT_RW
-count when we read or write the memory location
+Count when we read or write the memory location.
 .TP
 .BR HW_BREAKPOINT_X
-count when we execute code at the memory location
-.LP
+Count when we execute code at the memory location.
+.PP
 The values can be combined via a bitwise or, but the
 combination of
 .B HW_BREAKPOINT_R
@@ -929,21 +1243,23 @@ with
 is not allowed.
 .RE
 .TP
-.IR "bp_addr" " (Since Linux 2.6.33)"
-.I bp_addr
-address of the breakpoint.
-For execution breakpoints this is the memory address of the instruction
-of interest; for read and write breakpoints it is the memory address
+.IR "bp_addr" " (since Linux 2.6.33)"
+.\" commit 24f1e32c60c45c89a997c73395b69c8af6f0a84e
+This is the address of the breakpoint.
+For execution breakpoints, this is the memory address of the instruction
+of interest; for read and write breakpoints, it is the memory address
 of the memory location of interest.
 .TP
-.IR "config1" " (Since Linux 2.6.39)"
+.IR "config1" " (since Linux 2.6.39)"
+.\" commit a7e3ed1e470116c9d12c2f778431a481a6be8ab6
 .I config1
 is used for setting events that need an extra register or otherwise
 do not fit in the regular config field.
 Raw OFFCORE_EVENTS on Nehalem/Westmere/SandyBridge use this field
-on 3.3 and later kernels.
+on Linux 3.3 and later kernels.
 .TP
-.IR "bp_len" " (Since Linux 2.6.33)"
+.IR "bp_len" " (since Linux 2.6.33)"
+.\" commit 24f1e32c60c45c89a997c73395b69c8af6f0a84e
 .I bp_len
 is the length of the breakpoint being measured if
 .I type
@@ -953,100 +1269,167 @@ Options are
 .BR HW_BREAKPOINT_LEN_1 ,
 .BR HW_BREAKPOINT_LEN_2 ,
 .BR HW_BREAKPOINT_LEN_4 ,
+and
 .BR HW_BREAKPOINT_LEN_8 .
 For an execution breakpoint, set this to
 .IR sizeof(long) .
 .TP
-.IR "config2" " (Since Linux 2.6.39)"
-
+.IR "config2" " (since Linux 2.6.39)"
+.\" commit a7e3ed1e470116c9d12c2f778431a481a6be8ab6
 .I config2
 is a further extension of the
 .I config1
 field.
 .TP
-.IR "branch_sample_type" " (Since Linux 3.4)"
+.IR "branch_sample_type" " (since Linux 3.4)"
+.\" commit bce38cd53e5ddba9cb6d708c4ef3d04a4016ec7e
 If
 .B PERF_SAMPLE_BRANCH_STACK
 is enabled, then this specifies what branches to include
 in the branch record.
+.IP
+The first part of the value is the privilege level, which
+is a combination of one of the values listed below.
 If the user does not set privilege level explicitly, the kernel
 will use the event's privilege level.
 Event and branch privilege levels do not have to match.
-The value is formed by ORing together zero or more of the following values,
-although
-.B PERF_SAMPLE_BRANCH_ANY
-covers all branch types.
 .RS
 .TP
 .B PERF_SAMPLE_BRANCH_USER
-Branch target is in user space
+Branch target is in user space.
 .TP
 .B PERF_SAMPLE_BRANCH_KERNEL
-Branch target is in kernel space
+Branch target is in kernel space.
 .TP
 .B PERF_SAMPLE_BRANCH_HV
-Branch target is in hypervisor
+Branch target is in hypervisor.
+.TP
+.B PERF_SAMPLE_BRANCH_PLM_ALL
+A convenience value that is the three preceding values ORed together.
+.PP
+In addition to the privilege value, at least one or more of the
+following bits must be set.
 .TP
 .B PERF_SAMPLE_BRANCH_ANY
 Any branch type.
 .TP
 .B PERF_SAMPLE_BRANCH_ANY_CALL
-Any call branch
+Any call branch (includes direct calls, indirect calls, and far jumps).
 .TP
-.B PERF_SAMPLE_BRANCH_ANY_RETURN
-Any return branch
+.B PERF_SAMPLE_BRANCH_IND_CALL
+Indirect calls.
 .TP
-.BR PERF_SAMPLE_BRANCH_IND_CALL
-Indirect calls
+.BR PERF_SAMPLE_BRANCH_CALL " (since Linux 4.4)"
+.\" commit c229bf9dc179d2023e185c0f705bdf68484c1e73
+Direct calls.
 .TP
-.BR PERF_SAMPLE_BRANCH_PLM_ALL
-User, kernel, and hv
+.B PERF_SAMPLE_BRANCH_ANY_RETURN
+Any return branch.
+.TP
+.BR PERF_SAMPLE_BRANCH_IND_JUMP " (since Linux 4.2)"
+.\" commit c9fdfa14c3792c0160849c484e83aa57afd80ccc
+Indirect jumps.
+.TP
+.BR PERF_SAMPLE_BRANCH_COND " (since Linux 3.16)"
+.\" commit bac52139f0b7ab31330e98fd87fc5a2664951050
+Conditional branches.
+.TP
+.BR PERF_SAMPLE_BRANCH_ABORT_TX " (since Linux 3.11)"
+.\" commit 135c5612c460f89657c4698fe2ea753f6f667963
+Transactional memory aborts.
+.TP
+.BR PERF_SAMPLE_BRANCH_IN_TX " (since Linux 3.11)"
+.\" commit 135c5612c460f89657c4698fe2ea753f6f667963
+Branch in transactional memory transaction.
+.TP
+.BR PERF_SAMPLE_BRANCH_NO_TX " (since Linux 3.11)"
+.\" commit 135c5612c460f89657c4698fe2ea753f6f667963
+Branch not in transactional memory transaction.
+.BR PERF_SAMPLE_BRANCH_CALL_STACK " (since Linux 4.1)"
+.\" commit 2c44b1936bb3b135a3fac8b3493394d42e51cf70
+Branch is part of a hardware-generated call stack.
+This requires hardware support, currently only found
+on Intel x86 Haswell or newer.
 .RE
 .TP
-.IR "sample_regs_user" " (Since Linux 3.7)"
-This bitmask defines the set of user CPU registers to dump on samples.
-The layout of the register mask is architecture specific and
-described in the kernel header
+.IR "sample_regs_user" " (since Linux 3.7)"
+.\" commit 4018994f3d8785275ef0e7391b75c3462c029e56
+This bit mask defines the set of user CPU registers to dump on samples.
+The layout of the register mask is architecture-specific and
+is described in the kernel header file
 .IR arch/ARCH/include/uapi/asm/perf_regs.h .
 .TP
-.IR "sample_stack_user" " (Since Linux 3.7)"
+.IR "sample_stack_user" " (since Linux 3.7)"
+.\" commit c5ebcedb566ef17bda7b02686e0d658a7bb42ee7
 This defines the size of the user stack to dump if
 .B PERF_SAMPLE_STACK_USER
 is specified.
+.TP
+.IR "clockid" " (since Linux 4.1)"
+.\" commit 34f439278cef7b1177f8ce24f9fc81dfc6221d3b
+If
+.I use_clockid
+is set, then this field selects which internal Linux timer to
+use for timestamps.
+The available timers are defined in
+.IR linux/time.h ,
+with
+.BR CLOCK_MONOTONIC ,
+.BR CLOCK_MONOTONIC_RAW ,
+.BR CLOCK_REALTIME ,
+.BR CLOCK_BOOTTIME ,
+and
+.B CLOCK_TAI
+currently supported.
+.TP
+.IR "aux_watermark" " (since Linux 4.1)"
+.\" commit 1a5941312414c71dece6717da9a0fa1303127afa
+This specifies how much data is required to trigger a
+.B PERF_RECORD_AUX
+sample.
+.TP
+.IR "sample_max_stack" " (since Linux 4.8)"
+.\" commit 97c79a38cd454602645f0470ffb444b3b75ce574
+When
+.I sample_type
+includes
+.BR PERF_SAMPLE_CALLCHAIN ,
+this field specifies how many stack frames to report when
+generating the callchain.
 .SS Reading results
 Once a
 .BR perf_event_open ()
-file descriptor  has been opened, the values
+file descriptor has been opened, the values
 of the events can be read from the file descriptor.
 The values that are there are specified by the
 .I read_format
 field in the
 .I attr
 structure at open time.
-
+.PP
 If you attempt to read into a buffer that is not big enough to hold the
-data
+data, the error
 .B ENOSPC
-is returned
-
+results.
+.PP
 Here is the layout of the data returned by a read:
 .IP * 2
 If
 .B PERF_FORMAT_GROUP
 was specified to allow reading all events in a group at once:
-
+.IP
 .in +4n
-.nf
+.EX
 struct read_format {
     u64 nr;            /* The number of events */
     u64 time_enabled;  /* if PERF_FORMAT_TOTAL_TIME_ENABLED */
     u64 time_running;  /* if PERF_FORMAT_TOTAL_TIME_RUNNING */
-    struct
+    struct {
         u64 value;     /* The value of the event */
         u64 id;        /* if PERF_FORMAT_ID */
     } values[nr];
 };
-.fi
+.EE
 .in
 .IP *
 If
@@ -1054,33 +1437,33 @@ If
 was
 .I not
 specified:
-
+.IP
 .in +4n
-.nf
+.EX
 struct read_format {
     u64 value;         /* The value of the event */
     u64 time_enabled;  /* if PERF_FORMAT_TOTAL_TIME_ENABLED */
     u64 time_running;  /* if PERF_FORMAT_TOTAL_TIME_RUNNING */
     u64 id;            /* if PERF_FORMAT_ID */
 };
-.fi
+.EE
 .in
 .PP
 The values read are as follows:
 .TP
 .I nr
 The number of events in this file descriptor.
-Only available if
+Available only if
 .B PERF_FORMAT_GROUP
 was specified.
 .TP
 .IR time_enabled ", " time_running
 Total time the event was enabled and running.
-Normally these are the same.
-If more events are started
-than available counter slots on the PMU, then multiplexing
+Normally these values are the same.
+If more events are started,
+then available counter slots on the PMU, then multiplexing
 happens and events run only part of the time.
-In that case the
+In that case, the
 .I time_enabled
 and
 .I time running
@@ -1090,7 +1473,7 @@ values can be used to scale an estimated value for the count.
 An unsigned 64-bit value containing the counter result.
 .TP
 .I id
-A globally unique value for this particular event, only there if
+A globally unique value for this particular event; only present if
 .B PERF_FORMAT_ID
 was specified in
 .IR read_format .
@@ -1104,45 +1487,57 @@ mmap tracking)
 are logged into a ring-buffer.
 This ring-buffer is created and accessed through
 .BR mmap (2).
-
+.PP
 The mmap size should be 1+2^n pages, where the first page is a
 metadata page
 .RI ( "struct perf_event_mmap_page" )
 that contains various
 bits of information such as where the ring-buffer head is.
-
-Before kernel 2.6.39, there is a bug that means you must allocate a mmap
+.PP
+Before kernel 2.6.39, there is a bug that means you must allocate an mmap
 ring buffer when sampling even if you do not plan to access it.
-
+.PP
 The structure of the first metadata mmap page is as follows:
-
+.PP
 .in +4n
-.nf
+.EX
 struct perf_event_mmap_page {
-    __u32 version;          /* version number of this structure */
-    __u32 compat_version;   /* lowest version this is compat with */
-    __u32 lock;             /* seqlock for synchronization */
-    __u32 index;            /* hardware counter identifier */
-    __s64 offset;           /* add to hardware counter value */
-    __u64 time_enabled;     /* time event active */
-    __u64 time_running;     /* time event on CPU */
+    __u32 version;        /* version number of this structure */
+    __u32 compat_version; /* lowest version this is compat with */
+    __u32 lock;           /* seqlock for synchronization */
+    __u32 index;          /* hardware counter identifier */
+    __s64 offset;         /* add to hardware counter value */
+    __u64 time_enabled;   /* time event active */
+    __u64 time_running;   /* time event on CPU */
     union {
         __u64   capabilities;
-        __u64   cap_usr_time  : 1,
-                cap_usr_rdpmc : 1,
+        struct {
+            __u64 cap_usr_time / cap_usr_rdpmc / cap_bit0 : 1,
+                  cap_bit0_is_deprecated : 1,
+                  cap_user_rdpmc         : 1,
+                  cap_user_time          : 1,
+                  cap_user_time_zero     : 1,
+        };
     };
-    __u16   pmc_width;
-    __u16   time_shift;
-    __u32   time_mult;
-    __u64   time_offset;
-    __u64   __reserved[120];   /* Pad to 1k */
-    __u64   data_head;         /* head in the data section */
-    __u64   data_tail;         /* user-space written tail */
+    __u16 pmc_width;
+    __u16 time_shift;
+    __u32 time_mult;
+    __u64 time_offset;
+    __u64 __reserved[120];   /* Pad to 1 k */
+    __u64 data_head;         /* head in the data section */
+    __u64 data_tail;         /* user-space written tail */
+    __u64 data_offset;       /* where the buffer starts */
+    __u64 data_size;         /* data buffer size */
+    __u64 aux_head;
+    __u64 aux_tail;
+    __u64 aux_offset;
+    __u64 aux_size;
+
 }
-.fi
+.EE
 .in
-
-The following looks at the fields in the
+.PP
+The following list describes the fields in the
 .I perf_event_mmap_page
 structure in more detail:
 .TP
@@ -1159,8 +1554,9 @@ A seqlock for synchronization.
 A unique hardware counter identifier.
 .TP
 .I offset
-.\" FIXME clarify
-Add this to hardware counter value??
+When using rdpmc for reads this offset value
+must be added to the one returned by rdpmc to get
+the current total event count.
 .TP
 .I time_enabled
 Time the event was active.
@@ -1168,20 +1564,56 @@ Time the event was active.
 .I time_running
 Time the event was running.
 .TP
+.IR cap_usr_time " / " cap_usr_rdpmc " / " cap_bit0 " (since Linux 3.4)"
+.\" commit c7206205d00ab375839bd6c7ddb247d600693c09
+There was a bug in the definition of
 .I cap_usr_time
-User time capability
-.TP
+and
+.I cap_usr_rdpmc
+from Linux 3.4 until Linux 3.11.
+Both bits were defined to point to the same location, so it was
+impossible to know if
+.I cap_usr_time
+or
+.I cap_usr_rdpmc
+were actually set.
+.IP
+Starting with Linux 3.12, these are renamed to
+.\" commit fa7315871046b9a4c48627905691dbde57e51033
+.I cap_bit0
+and you should use the
+.I cap_user_time
+and
+.I cap_user_rdpmc
+fields instead.
+.TP
+.IR cap_bit0_is_deprecated " (since Linux 3.12)"
+.\" commit fa7315871046b9a4c48627905691dbde57e51033
+If set, this bit indicates that the kernel supports
+the properly separated
+.I cap_user_time
+and
+.I cap_user_rdpmc
+bits.
+.IP
+If not-set, it indicates an older kernel where
+.I cap_usr_time
+and
 .I cap_usr_rdpmc
+map to the same bit and thus both features should
+be used with caution.
+.TP
+.IR cap_user_rdpmc " (since Linux 3.12)"
+.\" commit fa7315871046b9a4c48627905691dbde57e51033
 If the hardware supports user-space read of performance counters
 without syscall (this is the "rdpmc" instruction on x86), then
 the following code can be used to do a read:
-
+.IP
 .in +4n
-.nf
+.EX
 u32 seq, time_mult, time_shift, idx, width;
 u64 count, enabled, running;
 u64 cyc, time_offset;
-s64 pmc = 0;
 
 do {
     seq = pc\->lock;
@@ -1201,45 +1633,59 @@ do {
 
     if (pc\->cap_usr_rdpmc && idx) {
         width = pc\->pmc_width;
-        pmc = rdpmc(idx \- 1);
+        count += rdpmc(idx \- 1);
     }
 
     barrier();
 } while (pc\->lock != seq);
-.fi
+.EE
 .in
 .TP
+.IR cap_user_time " (since Linux 3.12)"
+.\" commit fa7315871046b9a4c48627905691dbde57e51033
+This bit indicates the hardware has a constant, nonstop
+timestamp counter (TSC on x86).
+.TP
+.IR cap_user_time_zero " (since Linux 3.12)"
+.\" commit fa7315871046b9a4c48627905691dbde57e51033
+Indicates the presence of
+.I time_zero
+which allows mapping timestamp values to
+the hardware clock.
+.TP
 .I pmc_width
 If
 .IR cap_usr_rdpmc ,
 this field provides the bit-width of the value
 read using the rdpmc or equivalent instruction.
 This can be used to sign extend the result like:
-
+.IP
 .in +4n
-.nf
+.EX
 pmc <<= 64 \- pmc_width;
 pmc >>= 64 \- pmc_width; // signed shift right
 count += pmc;
-.fi
+.EE
 .in
 .TP
 .IR time_shift ", " time_mult ", " time_offset
-
+.IP
 If
 .IR cap_usr_time ,
 these fields can be used to compute the time
-delta since time_enabled (in nanoseconds) using rdtsc or similar.
+delta since
+.I time_enabled
+(in nanoseconds) using rdtsc or similar.
+.IP
 .nf
-
     u64 quot, rem;
     u64 delta;
     quot = (cyc >> time_shift);
-    rem = cyc & ((1 << time_shift) \- 1);
+    rem = cyc & (((u64)1 << time_shift) \- 1);
     delta = time_offset + quot * time_mult +
             ((rem * time_mult) >> time_shift);
 .fi
-
+.IP
 Where
 .IR time_offset ,
 .IR time_mult ,
@@ -1250,8 +1696,8 @@ are read in the
 seqcount loop described above.
 This delta can then be added to
 enabled and possible running (if idx), improving the scaling:
+.IP
 .nf
-
     enabled += delta;
     if (idx)
         running += delta;
@@ -1260,25 +1706,102 @@ enabled and possible running (if idx), improving the scaling:
     count = quot * enabled + (rem * enabled) / running;
 .fi
 .TP
+.IR time_zero " (since Linux 3.12)"
+.\" commit fa7315871046b9a4c48627905691dbde57e51033
+.IP
+If
+.I cap_usr_time_zero
+is set, then the hardware clock (the TSC timestamp counter on x86)
+can be calculated from the
+.IR time_zero ", " time_mult ", and " time_shift " values:"
+.IP
+.nf
+    time = timestamp - time_zero;
+    quot = time / time_mult;
+    rem  = time % time_mult;
+    cyc = (quot << time_shift) + (rem << time_shift) / time_mult;
+.fi
+.IP
+And vice versa:
+.IP
+.nf
+    quot = cyc >> time_shift;
+    rem  = cyc & (((u64)1 << time_shift) - 1);
+    timestamp = time_zero + quot * time_mult +
+        ((rem * time_mult) >> time_shift);
+.fi
+.TP
 .I data_head
 This points to the head of the data section.
 The value continuously increases, it does not wrap.
 The value needs to be manually wrapped by the size of the mmap buffer
 before accessing the samples.
-
-On SMP-capable platforms, after reading the data_head value,
+.IP
+On SMP-capable platforms, after reading the
+.I data_head
+value,
 user space should issue an rmb().
 .TP
-.I data_tail;
+.I data_tail
 When the mapping is
 .BR PROT_WRITE ,
 the
 .I data_tail
 value should be written by user space to reflect the last read data.
-In this case the kernel will not over-write unread data.
+In this case, the kernel will not overwrite unread data.
+.TP
+.IR data_offset " (since Linux 4.1)"
+.\" commit e8c6deac69629c0cb97c3d3272f8631ef17f8f0f
+Contains the offset of the location in the mmap buffer
+where perf sample data begins.
+.TP
+.IR data_size " (since Linux 4.1)"
+.\" commit e8c6deac69629c0cb97c3d3272f8631ef17f8f0f
+Contains the size of the perf sample region within
+the mmap buffer.
+.TP
+.IR aux_head ", " aux_tail ", " aux_offset ", " aux_size " (since Linux 4.1)
+.\" commit 45bfb2e50471abbbfd83d40d28c986078b0d24ff
+The AUX region allows mmaping a separate sample buffer for
+high-bandwidth data streams (separate from the main perf sample buffer).
+An example of a high-bandwidth stream is instruction tracing support,
+as is found in newer Intel processors.
+.IP
+To set up an AUX area, first
+.I aux_offset
+needs to be set with an offset greater than
+.IR data_offset + data_size
+and
+.I aux_size
+needs to be set to the desired buffer size.
+The desired offset and size must be page aligned, and the size
+must be a power of two.
+These values are then passed to mmap in order to map the AUX buffer.
+Pages in the AUX buffer are included as part of the
+.BR RLIMIT_MEMLOCK
+resource limit (see
+.BR setrlimit (2)),
+and also as part of the
+.I perf_event_mlock_kb
+allowance.
+.IP
+By default, the AUX buffer will be truncated if it will not fit
+in the available space in the ring buffer.
+If the AUX buffer is mapped as a read only buffer, then it will
+operate in ring buffer mode where old data will be overwritten
+by new.
+In overwrite mode, it might not be possible to infer where the
+new data began, and it is the consumer's job to disable
+measurement while reading to avoid possible data races.
+.IP
+The
+.IR aux_head " and " aux_tail
+ring buffer pointers have the same behavior and ordering
+rules as the previous described
+.IR data_head " and " data_tail .
 .PP
 The following 2^n ring-buffer pages have the layout described below.
-
+.PP
 If
 .I perf_event_attr.sample_id_all
 is set, then all event types will
@@ -1288,46 +1811,136 @@ an event took place (TID, TIME, ID, CPU, STREAM_ID) described in
 below, it will be stashed just after the
 .I perf_event_header
 and the fields already present for the existing
-fields, i.e., at the end of the payload.
-That way a newer perf.data
-file will be supported by older perf tools, with these new optional
+fields, that is, at the end of the payload.
+This allows a newer perf.data
+file to be supported by older perf tools, with the new optional
 fields being ignored.
-
+.PP
 The mmap values start with a header:
-
+.PP
 .in +4n
-.nf
+.EX
 struct perf_event_header {
     __u32   type;
     __u16   misc;
     __u16   size;
 };
-.fi
+.EE
 .in
-
+.PP
 Below, we describe the
 .I perf_event_header
 fields in more detail.
+For ease of reading,
+the fields with shorter descriptions are presented first.
 .TP
-.I type
+.I size
+This indicates the size of the record.
+.TP
+.I misc
 The
-.I type
-value is one of the below.
-The values in the corresponding record (that follows the header)
-depend on the
-.I type
-selected as shown.
-.RS
-.TP 4
+.I misc
+field contains additional information about the sample.
+.IP
+The CPU mode can be determined from this value by masking with
+.B PERF_RECORD_MISC_CPUMODE_MASK
+and looking for one of the following (note these are not
+bit masks, only one can be set at a time):
+.RS
+.TP
+.B PERF_RECORD_MISC_CPUMODE_UNKNOWN
+Unknown CPU mode.
+.TP
+.B PERF_RECORD_MISC_KERNEL
+Sample happened in the kernel.
+.TP
+.B PERF_RECORD_MISC_USER
+Sample happened in user code.
+.TP
+.B PERF_RECORD_MISC_HYPERVISOR
+Sample happened in the hypervisor.
+.TP
+.BR PERF_RECORD_MISC_GUEST_KERNEL " (since Linux 2.6.35)"
+.\" commit 39447b386c846bbf1c56f6403c5282837486200f
+Sample happened in the guest kernel.
+.TP
+.B PERF_RECORD_MISC_GUEST_USER " (since Linux 2.6.35)"
+.\" commit 39447b386c846bbf1c56f6403c5282837486200f
+Sample happened in guest user code.
+.RE
+.PP
+.RS
+Since the following three statuses are generated by
+different record types, they alias to the same bit:
+.TP
+.BR PERF_RECORD_MISC_MMAP_DATA " (since Linux 3.10)"
+.\" commit 2fe85427e3bf65d791700d065132772fc26e4d75
+This is set when the mapping is not executable;
+otherwise the mapping is executable.
+.TP
+.BR PERF_RECORD_MISC_COMM_EXEC " (since Linux 3.16)"
+.\" commit 82b897782d10fcc4930c9d4a15b175348fdd2871
+This is set for a
+.B PERF_RECORD_COMM
+record on kernels more recent than Linux 3.16
+if a process name change was caused by an
+.BR exec (2)
+system call.
+.TP
+.BR PERF_RECORD_MISC_SWITCH_OUT " (since Linux 4.3)"
+.\" commit 45ac1403f564f411c6a383a2448688ba8dd705a4
+When a
+.BR PERF_RECORD_SWITCH
+or
+.BR PERF_RECORD_SWITCH_CPU_WIDE
+record is generated, this bit indicates that the
+context switch is away from the current process
+(instead of into the current process).
+.RE
+.PP
+.RS
+In addition, the following bits can be set:
+.TP
+.B PERF_RECORD_MISC_EXACT_IP
+This indicates that the content of
+.B PERF_SAMPLE_IP
+points
+to the actual instruction that triggered the event.
+See also
+.IR perf_event_attr.precise_ip .
+.TP
+.BR PERF_RECORD_MISC_EXT_RESERVED " (since Linux 2.6.35)"
+.\" commit 1676b8a077c352085d52578fb4f29350b58b6e74
+This indicates there is extended data available (currently not used).
+.TP
+.B PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT
+.\" commit 930e6fcd2bcce9bcd9d4aa7e755678d33f3fe6f4
+This bit is not set by the kernel.
+It is reserved for the user-space perf utility to indicate that
+.I /proc/i[pid]/maps
+parsing was taking too long and was stopped, and thus the mmap
+records may be truncated.
+.RE
+.TP
+.I type
+The
+.I type
+value is one of the below.
+The values in the corresponding record (that follows the header)
+depend on the
+.I type
+selected as shown.
+.RS
+.TP 4
 .B PERF_RECORD_MMAP
 The MMAP events record the
 .B PROT_EXEC
 mappings so that we can correlate
 user-space IPs to code.
 They have the following structure:
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
     u32    pid, tid;
@@ -1336,20 +1949,38 @@ struct {
     u64    pgoff;
     char   filename[];
 };
-.fi
+.EE
 .in
+.RS
+.TP
+.I pid
+is the process ID.
+.TP
+.I tid
+is the thread ID.
+.TP
+.I addr
+is the address of the allocated memory.
+.I len
+is the length of the allocated memory.
+.I pgoff
+is the page offset of the allocated memory.
+.I filename
+is a string describing the backing of the allocated memory.
+.RE
 .TP
 .B PERF_RECORD_LOST
 This record indicates when events are lost.
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
-    u64 id;
-    u64 lost;
+    u64    id;
+    u64    lost;
+    struct sample_id sample_id;
 };
-.fi
+.EE
 .in
 .RS
 .TP
@@ -1362,106 +1993,140 @@ is the number of events that were lost.
 .TP
 .B PERF_RECORD_COMM
 This record indicates a change in the process name.
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
-    u32 pid, tid;
-    char comm[];
+    u32    pid;
+    u32    tid;
+    char   comm[];
+    struct sample_id sample_id;
 };
-.fi
+.EE
 .in
+.RS
+.TP
+.I pid
+is the process ID.
+.TP
+.I tid
+is the thread ID.
+.TP
+.I comm
+is a string containing the new name of the process.
+.RE
 .TP
 .B PERF_RECORD_EXIT
 This record indicates a process exit event.
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
-    u32 pid, ppid;
-    u32 tid, ptid;
-    u64 time;
+    u32    pid, ppid;
+    u32    tid, ptid;
+    u64    time;
+    struct sample_id sample_id;
 };
-.fi
+.EE
 .in
 .TP
 .BR PERF_RECORD_THROTTLE ", " PERF_RECORD_UNTHROTTLE
 This record indicates a throttle/unthrottle event.
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
-    u64 time;
-    u64 id;
-    u64 stream_id;
+    u64    time;
+    u64    id;
+    u64    stream_id;
+    struct sample_id sample_id;
 };
-.fi
+.EE
 .in
 .TP
 .B PERF_RECORD_FORK
 This record indicates a fork event.
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
-    u32 pid, ppid;
-    u32 tid, ptid;
-    u64 time;
+    u32    pid, ppid;
+    u32    tid, ptid;
+    u64    time;
+    struct sample_id sample_id;
 };
-.fi
+.EE
 .in
 .TP
 .B PERF_RECORD_READ
 This record indicates a read event.
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
-    u32 pid, tid;
+    u32    pid, tid;
     struct read_format values;
+    struct sample_id sample_id;
 };
-.fi
+.EE
 .in
 .TP
 .B PERF_RECORD_SAMPLE
 This record indicates a sample.
-
+.IP
 .in +4n
-.nf
+.EX
 struct {
     struct perf_event_header header;
-    u64   ip;         /* if PERF_SAMPLE_IP */
-    u32   pid, tid;   /* if PERF_SAMPLE_TID */
-    u64   time;       /* if PERF_SAMPLE_TIME */
-    u64   addr;       /* if PERF_SAMPLE_ADDR */
-    u64   id;         /* if PERF_SAMPLE_ID */
-    u64   stream_id;  /* if PERF_SAMPLE_STREAM_ID */
-    u32   cpu, res;   /* if PERF_SAMPLE_CPU */
-    u64   period;     /* if PERF_SAMPLE_PERIOD */
-    struct read_format v; /* if PERF_SAMPLE_READ */
-    u64   nr;         /* if PERF_SAMPLE_CALLCHAIN */
-    u64   ips[nr];    /* if PERF_SAMPLE_CALLCHAIN */
-    u32   size;       /* if PERF_SAMPLE_RAW */
-    char  data[size]; /* if PERF_SAMPLE_RAW */
-    u64   bnr;        /* if PERF_SAMPLE_BRANCH_STACK */
+    u64    sample_id;   /* if PERF_SAMPLE_IDENTIFIER */
+    u64    ip;          /* if PERF_SAMPLE_IP */
+    u32    pid, tid;    /* if PERF_SAMPLE_TID */
+    u64    time;        /* if PERF_SAMPLE_TIME */
+    u64    addr;        /* if PERF_SAMPLE_ADDR */
+    u64    id;          /* if PERF_SAMPLE_ID */
+    u64    stream_id;   /* if PERF_SAMPLE_STREAM_ID */
+    u32    cpu, res;    /* if PERF_SAMPLE_CPU */
+    u64    period;      /* if PERF_SAMPLE_PERIOD */
+    struct read_format v;
+                        /* if PERF_SAMPLE_READ */
+    u64    nr;          /* if PERF_SAMPLE_CALLCHAIN */
+    u64    ips[nr];     /* if PERF_SAMPLE_CALLCHAIN */
+    u32    size;        /* if PERF_SAMPLE_RAW */
+    char  data[size];   /* if PERF_SAMPLE_RAW */
+    u64    bnr;         /* if PERF_SAMPLE_BRANCH_STACK */
     struct perf_branch_entry lbr[bnr];
-                      /* if PERF_SAMPLE_BRANCH_STACK */
-    u64   abi;        /* if PERF_SAMPLE_REGS_USER */
-    u64   regs[weight(mask)];
-                      /* if PERF_SAMPLE_REGS_USER */
-    u64   size;       /* if PERF_SAMPLE_STACK_USER */
-    char  data[size]; /* if PERF_SAMPLE_STACK_USER */
-    u64   dyn_size;   /* if PERF_SAMPLE_STACK_USER */
-    u64   weight;     /* if PERF_SAMPLE_WEIGHT */
-    u64   data_src;   /* if PERF_SAMPLE_DATA_SRC */
+                        /* if PERF_SAMPLE_BRANCH_STACK */
+    u64    abi;         /* if PERF_SAMPLE_REGS_USER */
+    u64    regs[weight(mask)];
+                        /* if PERF_SAMPLE_REGS_USER */
+    u64    size;        /* if PERF_SAMPLE_STACK_USER */
+    char   data[size];  /* if PERF_SAMPLE_STACK_USER */
+    u64    dyn_size;    /* if PERF_SAMPLE_STACK_USER &&
+                           size != 0 */
+    u64    weight;      /* if PERF_SAMPLE_WEIGHT */
+    u64    data_src;    /* if PERF_SAMPLE_DATA_SRC */
+    u64    transaction; /* if PERF_SAMPLE_TRANSACTION */
+    u64    abi;         /* if PERF_SAMPLE_REGS_INTR */
+    u64    regs[weight(mask)];
+                        /* if PERF_SAMPLE_REGS_INTR */
 };
-.fi
-.RS
+.EE
+.RS 4
+.TP 4
+.I sample_id
+If
+.B PERF_SAMPLE_IDENTIFIER
+is enabled, a 64-bit unique ID is included.
+This is a duplication of the
+.B PERF_SAMPLE_ID
+.I id
+value, but included at the beginning of the sample
+so parsers can easily obtain the value.
 .TP
 .I ip
 If
@@ -1546,7 +2211,7 @@ If
 is enabled, then a 32-bit value indicating size
 is included followed by an array of 8-bit values of length size.
 The values are padded with 0 to have 64-bit alignment.
-
+.IP
 This RAW record data is opaque with respect to the ABI.
 The ABI doesn't make any promises with respect to the stability
 of its content, it may vary depending
@@ -1563,39 +2228,57 @@ structures which each include the fields:
 .RS
 .TP
 .I from
-indicating the source instruction (may not be a branch)
+This indicates the source instruction (may not be a branch).
 .TP
 .I to
-the branch target
+The branch target.
 .TP
 .I mispred
-the branch target was mispredicted
+The branch target was mispredicted.
 .TP
 .I predicted
-the branch target was predicted.
-.RE
+The branch target was predicted.
+.TP
+.IR in_tx " (since Linux 3.11)"
+.\" commit 135c5612c460f89657c4698fe2ea753f6f667963
+The branch was in a transactional memory transaction.
+.TP
+.IR abort " (since Linux 3.11)"
+.\" commit 135c5612c460f89657c4698fe2ea753f6f667963
+The branch was in an aborted transactional memory transaction.
+.TP
+.IR cycles " (since Linux 4.3)"
+.\" commit 71ef3c6b9d4665ee7afbbe4c208a98917dcfc32f
+This reports the number of cycles elapsed since the
+previous branch stack update.
+.PP
 The entries are from most to least recent, so the first entry
 has the most recent branch.
-
+.PP
 Support for
-.I mispred
+.IR mispred ,
+.IR predicted ,
 and
-.I predicted
-is optional; if not supported, both
+.IR cycles
+is optional; if not supported, those
 values will be 0.
-
+.PP
+The type of branches recorded is specified by the
+.I branch_sample_type
+field.
+.RE
 .TP
 .IR abi ", " regs[weight(mask)]
 If
 .B PERF_SAMPLE_REGS_USER
 is enabled, then the user CPU registers are recorded.
-
+.IP
 The
 .I abi
 field is one of
 .BR PERF_SAMPLE_REGS_ABI_NONE ", " PERF_SAMPLE_REGS_ABI_32 " or "
 .BR PERF_SAMPLE_REGS_ABI_64 .
-
+.IP
 The
 .I regs
 field is an array of the CPU registers that were specified by
@@ -1604,26 +2287,33 @@ the
 attr field.
 The number of values is the number of bits set in the
 .I sample_regs_user
-bitmask.
+bit mask.
 .TP
 .IR size ", " data[size] ", " dyn_size
 If
 .B PERF_SAMPLE_STACK_USER
-is enabled, then record the user stack to enable backtracing.
+is enabled, then the user stack is recorded.
+This can be used to generate stack backtraces.
 .I size
 is the size requested by the user in
-.I stack_user_size
+.I sample_stack_user
 or else the maximum record size.
 .I data
-is the stack data.
+is the stack data (a raw dump of the memory pointed to by the
+stack pointer at the time of sampling).
 .I dyn_size
 is the amount of data actually dumped (can be less than
 .IR size ).
+Note that
+.I dyn_size
+is omitted if
+.I size
+is 0.
 .TP
 .I weight
 If
 .B PERF_SAMPLE_WEIGHT
-is enabled, then a 64 bit value provided by the hardware
+is enabled, then a 64-bit value provided by the hardware
 is recorded that indicates how costly the event was.
 This allows expensive events to stand out more clearly
 in profiles.
@@ -1631,211 +2321,508 @@ in profiles.
 .I data_src
 If
 .B PERF_SAMPLE_DATA_SRC
-is enabled, then a 64 bit value is recorded that is made up of
+is enabled, then a 64-bit value is recorded that is made up of
 the following fields:
 .RS
-.TP
+.TP 4
 .I mem_op
-type of opcode, a bitwise combination of
+Type of opcode, a bitwise combination of:
+.IP
+.PD 0
+.RS
+.TP 24
 .B PERF_MEM_OP_NA
-(not available),
+Not available
+.TP
 .B PERF_MEM_OP_LOAD
-(load instruction),
+Load instruction
+.TP
 .B PERF_MEM_OP_STORE
-(store instruction),
+Store instruction
+.TP
 .B PERF_MEM_OP_PFETCH
-(prefetch), and
+Prefetch
+.TP
 .B PERF_MEM_OP_EXEC
-(executable code).
+Executable code
+.RE
+.PD
 .TP
 .I mem_lvl
-memory hierarchy level hit or miss, a bitwise combination of
+Memory hierarchy level hit or miss, a bitwise combination of
+the following, shifted left by
+.BR PERF_MEM_LVL_SHIFT :
+.IP
+.PD 0
+.RS
+.TP 24
 .B PERF_MEM_LVL_NA
-(not available),
+Not available
+.TP
 .B PERF_MEM_LVL_HIT
-(hit),
+Hit
+.TP
 .B PERF_MEM_LVL_MISS
-(miss),
+Miss
+.TP
 .B PERF_MEM_LVL_L1
-(level 1 cache),
+Level 1 cache
+.TP
 .B PERF_MEM_LVL_LFB
-(line fill buffer),
+Line fill buffer
+.TP
 .B PERF_MEM_LVL_L2
-(level 2 cache),
+Level 2 cache
+.TP
 .B PERF_MEM_LVL_L3
-(level 3 cache),
+Level 3 cache
+.TP
 .B PERF_MEM_LVL_LOC_RAM
-(local DRAM),
+Local DRAM
+.TP
 .B PERF_MEM_LVL_REM_RAM1
-(remote DRAM 1 hop),
+Remote DRAM 1 hop
+.TP
 .B PERF_MEM_LVL_REM_RAM2
-(remote DRAM 2 hops),
+Remote DRAM 2 hops
+.TP
 .B PERF_MEM_LVL_REM_CCE1
-(remote cache 1 hop),
+Remote cache 1 hop
+.TP
 .B PERF_MEM_LVL_REM_CCE2
-(remote cache 2 hops),
+Remote cache 2 hops
+.TP
 .B PERF_MEM_LVL_IO
-(I/O memory), and
+I/O memory
+.TP
 .B PERF_MEM_LVL_UNC
-(uncached memory).
+Uncached memory
+.RE
+.PD
 .TP
 .I mem_snoop
-snoop mode, a bitwise combination of
+Snoop mode, a bitwise combination of the following, shifted left by
+.BR PERF_MEM_SNOOP_SHIFT :
+.IP
+.PD 0
+.RS
+.TP 24
 .B PERF_MEM_SNOOP_NA
-(not available),
+Not available
+.TP
 .B PERF_MEM_SNOOP_NONE
-(no snoop),
+No snoop
+.TP
 .B PERF_MEM_SNOOP_HIT
-(snoop hit),
+Snoop hit
+.TP
 .B PERF_MEM_SNOOP_MISS
-(snoop miss), and
+Snoop miss
+.TP
 .B PERF_MEM_SNOOP_HITM
-(snoop hit modified).
+Snoop hit modified
+.RE
+.PD
 .TP
 .I mem_lock
-lock instruction, a bitwise combination of
+Lock instruction, a bitwise combination of the following, shifted left by
+.BR PERF_MEM_LOCK_SHIFT :
+.IP
+.PD 0
+.RS
+.TP 24
 .B PERF_MEM_LOCK_NA
-(not available) and
+Not available
+.TP
 .B PERF_MEM_LOCK_LOCKED
-(locked transaction).
+Locked transaction
+.RE
+.PD
 .TP
 .I mem_dtlb
-tlb access hit or miss, a bitwise combination of
+TLB access hit or miss, a bitwise combination of the following, shifted
+left by
+.BR PERF_MEM_TLB_SHIFT :
+.IP
+.PD 0
+.RS
+.TP 24
 .B PERF_MEM_TLB_NA
-(not available),
+Not available
+.TP
 .B PERF_MEM_TLB_HIT
-(hit),
+Hit
+.TP
 .B PERF_MEM_TLB_MISS
-(miss),
+Miss
+.TP
 .B PERF_MEM_TLB_L1
-(level 1 TLB),
+Level 1 TLB
+.TP
 .B PERF_MEM_TLB_L2
-(level 2 TLB),
+Level 2 TLB
+.TP
 .B PERF_MEM_TLB_WK
-(hardware walker), and
+Hardware walker
+.TP
 .B PERF_MEM_TLB_OS
-(OS fault handler).
+OS fault handler
 .RE
+.PD
 .RE
+.TP
+.I transaction
+If the
+.B PERF_SAMPLE_TRANSACTION
+flag is set, then a 64-bit field is recorded describing
+the sources of any transactional memory aborts.
+.IP
+The field is a bitwise combination of the following values:
+.RS
+.TP
+.B PERF_TXN_ELISION
+Abort from an elision type transaction (Intel-CPU-specific).
+.TP
+.B PERF_TXN_TRANSACTION
+Abort from a generic transaction.
+.TP
+.B PERF_TXN_SYNC
+Synchronous abort (related to the reported instruction).
+.TP
+.B PERF_TXN_ASYNC
+Asynchronous abort (not related to the reported instruction).
+.TP
+.B PERF_TXN_RETRY
+Retryable abort (retrying the transaction may have succeeded).
+.TP
+.B PERF_TXN_CONFLICT
+Abort due to memory conflicts with other threads.
+.TP
+.B PERF_TXN_CAPACITY_WRITE
+Abort due to write capacity overflow.
+.TP
+.B PERF_TXN_CAPACITY_READ
+Abort due to read capacity overflow.
 .RE
+.IP
+In addition, a user-specified abort code can be obtained from
+the high 32 bits of the field by shifting right by
+.B PERF_TXN_ABORT_SHIFT
+and masking with the value
+.BR PERF_TXN_ABORT_MASK .
 .TP
-.I misc
+.IR abi ", " regs[weight(mask)]
+If
+.B PERF_SAMPLE_REGS_INTR
+is enabled, then the user CPU registers are recorded.
+.IP
 The
-.I misc
-field contains additional information about the sample.
-
-The CPU mode can be determined from this value by masking with
-.B PERF_RECORD_MISC_CPUMODE_MASK
-and looking for one of the following (note these are not
-bit masks, only one can be set at a time):
+.I abi
+field is one of
+.BR PERF_SAMPLE_REGS_ABI_NONE ,
+.BR PERF_SAMPLE_REGS_ABI_32 ,
+or
+.BR PERF_SAMPLE_REGS_ABI_64 .
+.IP
+The
+.I regs
+field is an array of the CPU registers that were specified by
+the
+.I sample_regs_intr
+attr field.
+The number of values is the number of bits set in the
+.I sample_regs_intr
+bit mask.
+.RE
+.TP
+.B PERF_RECORD_MMAP2
+This record includes extended information on
+.BR mmap (2)
+calls returning executable mappings.
+The format is similar to that of the
+.B PERF_RECORD_MMAP
+record, but includes extra values that allow uniquely identifying
+shared mappings.
+.IP
+.in +4n
+.EX
+struct {
+    struct perf_event_header header;
+    u32    pid;
+    u32    tid;
+    u64    addr;
+    u64    len;
+    u64    pgoff;
+    u32    maj;
+    u32    min;
+    u64    ino;
+    u64    ino_generation;
+    u32    prot;
+    u32    flags;
+    char   filename[];
+    struct sample_id sample_id;
+};
+.EE
 .RS
 .TP
-.B PERF_RECORD_MISC_CPUMODE_UNKNOWN
-Unknown CPU mode.
+.I pid
+is the process ID.
 .TP
-.B PERF_RECORD_MISC_KERNEL
-Sample happened in the kernel.
+.I tid
+is the thread ID.
 .TP
-.B PERF_RECORD_MISC_USER
-Sample happened in user code.
+.I addr
+is the address of the allocated memory.
 .TP
-.B PERF_RECORD_MISC_HYPERVISOR
-Sample happened in the hypervisor.
+.I len
+is the length of the allocated memory.
 .TP
-.B PERF_RECORD_MISC_GUEST_KERNEL
-Sample happened in the guest kernel.
+.I pgoff
+is the page offset of the allocated memory.
 .TP
-.B PERF_RECORD_MISC_GUEST_USER
-Sample happened in guest user code.
+.I maj
+is the major ID of the underlying device.
+.TP
+.I min
+is the minor ID of the underlying device.
+.TP
+.I ino
+is the inode number.
+.TP
+.I ino_generation
+is the inode generation.
+.TP
+.I prot
+is the protection information.
+.TP
+.I flags
+is the flags information.
+.TP
+.I filename
+is a string describing the backing of the allocated memory.
 .RE
-
+.TP
+.BR PERF_RECORD_AUX " (since Linux 4.1)"
+\" commit 68db7e98c3a6ebe7284b6cf14906ed7c55f3f7f0
+This record reports that new data is available in the separate
+AUX buffer region.
+.IP
+.in +4n
+.EX
+struct {
+    struct perf_event_header header;
+    u64    aux_offset;
+    u64    aux_size;
+    u64    flags;
+    struct sample_id sample_id;
+};
+.EE
 .RS
-In addition, one of the following bits can be set:
 .TP
-.B PERF_RECORD_MISC_MMAP_DATA
-This is set when the mapping is not executable;
-otherwise the mapping is executable.
+.I aux_offset
+offset in the AUX mmap region where the new data begins.
 .TP
-.B PERF_RECORD_MISC_EXACT_IP
-This indicates that the content of
-.B PERF_SAMPLE_IP
-points
-to the actual instruction that triggered the event.
-See also
-.IR perf_event_attr.precise_ip .
+.I aux_size
+size of the data made available.
 .TP
-.B PERF_RECORD_MISC_EXT_RESERVED
-This indicates there is extended data available (currently not used).
+.I flags
+describes the AUX update.
+.RS
+.TP
+.B PERF_AUX_FLAG_TRUNCATED
+if set, then the data returned was truncated to fit the available
+buffer size.
+.TP
+.B PERF_AUX_FLAG_OVERWRITE
+.\" commit 2023a0d2829e521fe6ad6b9907f3f90bfbf57142
+if set, then the data returned has overwritten previous data.
+.RE
 .RE
 .TP
-.I size
-This indicates the size of the record.
+.BR PERF_RECORD_ITRACE_START " (since Linux 4.1)"
+\" ec0d7729bbaed4b9d2d3fada693278e13a3d1368
+This record indicates which process has initiated an instruction
+trace event, allowing tools to properly correlate the instruction
+addresses in the AUX buffer with the proper executable.
+.IP
+.in +4n
+.EX
+struct {
+    struct perf_event_header header;
+    u32    pid;
+    u32    tid;
+};
+.EE
+.RS
+.TP
+.I pid
+process ID of the thread starting an instruction trace.
+.TP
+.I tid
+thread ID of the thread starting an instruction trace.
+.RE
+.TP
+.BR PERF_RECORD_LOST_SAMPLES " (since Linux 4.2)"
+\" f38b0dbb491a6987e198aa6b428db8692a6480f8
+When using hardware sampling (such as Intel PEBS) this record
+indicates some number of samples that may have been lost.
+.IP
+.in +4n
+.EX
+struct {
+    struct perf_event_header header;
+    u64    lost;
+    struct sample_id sample_id;
+};
+.EE
+.RS
+.TP
+.I lost
+the number of potentially lost samples.
 .RE
-.SS Signal overflow
-Events can be set to deliver a signal when a threshold is crossed.
-The signal handler is set up using the
+.TP
+.BR PERF_RECORD_SWITCH " (since Linux 4.3)"
+\" commit 45ac1403f564f411c6a383a2448688ba8dd705a4
+This record indicates a context switch has happened.
+The
+.B PERF_RECORD_MISC_SWITCH_OUT
+bit in the
+.I misc
+field indicates whether it was a context switch into
+or away from the current process.
+.IP
+.in +4n
+.EX
+struct {
+    struct perf_event_header header;
+    struct sample_id sample_id;
+};
+.EE
+.TP
+.BR PERF_RECORD_SWITCH_CPU_WIDE " (since Linux 4.3)"
+\" commit 45ac1403f564f411c6a383a2448688ba8dd705a4
+As with
+.B PERF_RECORD_SWITCH
+this record indicates a context switch has happened,
+but it only occurs when sampling in CPU-wide mode
+and provides additional information on the process
+being switched to/from.
+The
+.B PERF_RECORD_MISC_SWITCH_OUT
+bit in the
+.I misc
+field indicates whether it was a context switch into
+or away from the current process.
+.IP
+.in +4n
+.EX
+struct {
+    struct perf_event_header header;
+    u32 next_prev_pid;
+    u32 next_prev_tid;
+    struct sample_id sample_id;
+};
+.EE
+.RS
+.TP
+.I next_prev_pid
+The process ID of the previous (if switching in)
+or next (if switching out) process on the CPU.
+.TP
+.I next_prev_tid
+The thread ID of the previous (if switching in)
+or next (if switching out) thread on the CPU.
+.RE
+.RE
+.SS Overflow handling
+Events can be set to notify when a threshold is crossed,
+indicating an overflow.
+Overflow conditions can be captured by monitoring the
+event file descriptor with
 .BR poll (2),
 .BR select (2),
-.BR epoll (2)
+or
+.BR epoll (7).
+Alternatively, the overflow events can be captured via sa signal handler,
+by enabling I/O signaling on the file descriptor; see the discussion of the
+.BR F_SETOWN
 and
-.BR fcntl (2),
-system calls.
-
-To generate signals, sampling must be enabled
+.BR F_SETSIG
+operations in
+.BR fcntl (2).
+.PP
+Overflows are generated only by sampling events
 .RI ( sample_period
-must have a non-zero value).
-
-There are two ways to generate signals.
-
+must have a nonzero value).
+.PP
+There are two ways to generate overflow notifications.
+.PP
 The first is to set a
 .I wakeup_events
 or
 .I wakeup_watermark
-value that will generate a signal if a certain number of samples
+value that will trigger if a certain number of samples
 or bytes have been written to the mmap ring buffer.
-In this case a signal of type
+In this case,
 .B POLL_IN
-is sent.
-
+is indicated.
+.PP
 The other way is by use of the
 .B PERF_EVENT_IOC_REFRESH
 ioctl.
 This ioctl adds to a counter that decrements each time the event overflows.
-When non-zero, a
+When nonzero,
 .B POLL_IN
-signal is sent on overflow, but
-once the value reaches 0, a signal is sent of type
+is indicated, but
+once the counter reaches 0
 .B POLL_HUP
-and
+is indicated and
 the underlying event is disabled.
-
-Note: on newer kernels (definitely noticed with 3.2)
-.\" FIXME(Vince) : Find out when this was introduced
-a signal is provided for every overflow, even if
-.I wakeup_events
-is not set.
+.PP
+Refreshing an event group leader refreshes all siblings and
+refreshing with a parameter of 0 currently enables infinite
+refreshes;
+these behaviors are unsupported and should not be relied on.
+.\" See https://lkml.org/lkml/2011/5/24/337
+.PP
+Starting with Linux 3.18,
+.\" commit 179033b3e064d2cd3f5f9945e76b0a0f0fbf4883
+.B POLL_HUP
+is indicated if the event being monitored is attached to a different
+process and that process exits.
 .SS rdpmc instruction
 Starting with Linux 3.4 on x86, you can use the
+.\" commit c7206205d00ab375839bd6c7ddb247d600693c09
 .I rdpmc
 instruction to get low-latency reads without having to enter the kernel.
 Note that using
 .I rdpmc
 is not necessarily faster than other methods for reading event values.
-
+.PP
 Support for this can be detected with the
 .I cap_usr_rdpmc
 field in the mmap page; documentation on how
 to calculate event values can be found in that section.
+.PP
+Originally, when rdpmc support was enabled, any process (not just ones
+with an active perf event) could use the rdpmc instruction to access
+the counters.
+Starting with Linux 4.0,
+.\" 7911d3f7af14a614617e38245fedf98a724e46a9
+rdpmc support is only allowed if an event is currently enabled
+in a process's context.
+To restore the old behavior, write the value 2 to
+.IR /sys/devices/cpu/rdpmc .
 .SS perf_event ioctl calls
 .PP
 Various ioctls act on
 .BR perf_event_open ()
-file descriptors
+file descriptors:
 .TP
 .B PERF_EVENT_IOC_ENABLE
-Enables the individual event or event group specified by the
+This enables the individual event or event group specified by the
 file descriptor argument.
-
+.IP
 If the
 .B PERF_IOC_FLAG_GROUP
 bit is set in the ioctl argument, then all events in a group are
@@ -1843,16 +2830,16 @@ enabled, even if the event specified is not the group leader
 (but see BUGS).
 .TP
 .B PERF_EVENT_IOC_DISABLE
-Disables the individual counter or event group specified by the
+This disables the individual counter or event group specified by the
 file descriptor argument.
-
+.IP
 Enabling or disabling the leader of a group enables or disables the
 entire group; that is, while the group leader is disabled, none of the
 counters in the group will count.
 Enabling or disabling a member of a group other than the leader
 affects only that counter; disabling a non-leader
 stops that counter from counting but doesn't affect any other counter.
-
+.IP
 If the
 .B PERF_IOC_FLAG_GROUP
 bit is set in the ioctl argument, then all events in a group are
@@ -1865,11 +2852,11 @@ to enable a counter for a number of overflows specified by the argument,
 after which it is disabled.
 Subsequent calls of this ioctl add the argument value to the current
 count.
-A signal with
+An overflow notification with
 .B POLL_IN
 set will happen on each overflow until the
-count reaches 0; when that happens a signal with
-POLL_HUP
+count reaches 0; when that happens a notification with
+.B POLL_HUP
 set is sent and the event is disabled.
 Using an argument of 0 is considered undefined behavior.
 .TP
@@ -1882,7 +2869,7 @@ multiplexing
 or
 .I time_running
 values.
-
+.IP
 If the
 .B PERF_IOC_FLAG_GROUP
 bit is set in the ioctl argument, then all events in a group are
@@ -1890,63 +2877,168 @@ reset, even if the event specified is not the group leader
 (but see BUGS).
 .TP
 .B PERF_EVENT_IOC_PERIOD
-IOC_PERIOD is the command to update the period; it
-does not update the current period but instead defers until next.
-
+This updates the overflow period for the event.
+.IP
+Since Linux 3.7 (on ARM)
+.\" commit 3581fe0ef37ce12ac7a4f74831168352ae848edc
+and Linux 3.14 (all other architectures),
+.\" commit bad7192b842c83e580747ca57104dd51fe08c223
+the new period takes effect immediately.
+On older kernels, the new period did not take effect until
+after the next overflow.
+.IP
 The argument is a pointer to a 64-bit value containing the
 desired new period.
+.IP
+Prior to Linux 2.6.36,
+.\" commit ad0cf3478de8677f720ee06393b3147819568d6a
+this ioctl always failed due to a bug
+in the kernel.
 .TP
 .B PERF_EVENT_IOC_SET_OUTPUT
 This tells the kernel to report event notifications to the specified
 file descriptor rather than the default one.
 The file descriptors must all be on the same CPU.
-
+.IP
 The argument specifies the desired file descriptor, or \-1 if
 output should be ignored.
 .TP
-.BR PERF_EVENT_IOC_SET_FILTER " (Since Linux 2.6.33)"
+.BR PERF_EVENT_IOC_SET_FILTER " (since Linux 2.6.33)"
+.\" commit 6fb2915df7f0747d9044da9dbff5b46dc2e20830
 This adds an ftrace filter to this event.
-
+.IP
 The argument is a pointer to the desired ftrace filter.
-.SS Using prctl
-A process can enable or disable all the event groups that are
-attached to it using the
+.TP
+.BR PERF_EVENT_IOC_ID " (since Linux 3.12)"
+.\" commit cf4957f17f2a89984915ea808876d9c82225b862
+This returns the event ID value for the given event file descriptor.
+.IP
+The argument is a pointer to a 64-bit unsigned integer
+to hold the result.
+.TP
+.BR PERF_EVENT_IOC_SET_BPF " (since Linux 4.1)"
+.\" commit 2541517c32be2531e0da59dfd7efc1ce844644f5
+This allows attaching a Berkeley Packet Filter (BPF)
+program to an existing kprobe tracepoint event.
+You need
+.B CAP_SYS_ADMIN
+privileges to use this ioctl.
+.IP
+The argument is a BPF program file descriptor that was created by
+a previous
+.BR bpf (2)
+system call.
+.TP
+.BR PERF_EVENT_IOC_PAUSE_OUTPUT " (since Linux 4.7)"
+.\" commit 86e7972f690c1017fd086cdfe53d8524e68c661c
+This allows pausing and resuming the event's ring-buffer.
+A paused ring-buffer does not prevent generation of samples,
+but simply discards them.
+The discarded samples are considered lost, and cause a
+.BR PERF_RECORD_LOST
+sample to be generated when possible.
+An overflow signal may still be triggered by the discarded sample
+even though the ring-buffer remains empty.
+.IP
+The argument is an unsigned 32-bit integer.
+A nonzero value pauses the ring-buffer, while a
+zero value resumes the ring-buffer.
+.TP
+.BR PERF_EVENT_MODIFY_ATTRIBUTES " (since Linux 4.17)"
+.\" commit 32ff77e8cc9e66cc4fb38098f64fd54cc8f54573
+This allows modifying an existing event without the overhead
+of closing and reopening a new event.
+Currently this is supported only for breakpoint events.
+.IP
+The argument is a pointer to a
+.I perf_event_attr
+structure containing the updated event settings.
+.TP
+.BR PERF_EVENT_IOC_QUERY_BPF " (since Linux 4.16)"
+.\" commit f371b304f12e31fe30207c41ca7754564e0ea4dc
+This allows querying which Berkeley Packet Filter (BPF)
+programs are attached to an existing kprobe tracepoint.
+You can only attach one BPF program per event, but you can
+have multiple events attached to a tracepoint.
+Querying this value on one tracepoint event returns the id
+of all BPF programs in all events attached to the tracepoint.
+You need
+.B CAP_SYS_ADMIN
+privileges to use this ioctl.
+.IP
+The argument is a pointer to a structure
+.in +4n
+.EX
+struct perf_event_query_bpf {
+    __u32    ids_len;
+    __u32    prog_cnt;
+    __u32    ids[0];
+};
+.EE
+.IP
+The
+.I ids_len
+field indicates the number of ids that can fit in the provided
+.I ids
+array.
+The
+.I prog_cnt
+value is filled in by the kernel with the number of attached
+BPF programs.
+The
+.I ids
+array is filled with the id of each attached BPF program.
+If there are more programs than will fit in the array, then the
+kernel will return
+.B ENOSPC
+and
+.I ids_len
+will indicate the number of program IDs that were successfully copied.
+.\"
+.SS Using prctl(2)
+A process can enable or disable all currently open event groups
+using the
 .BR prctl (2)
 .B PR_TASK_PERF_EVENTS_ENABLE
 and
 .B PR_TASK_PERF_EVENTS_DISABLE
 operations.
-This applies to all counters on the current process, whether created by
-this process or by another, and does not affect any counters that this
-process has created on other processes.
-It enables or disables only
-the group leaders, not any other members in the groups.
+This applies only to events created locally by the calling process.
+This does not apply to events created by other processes attached
+to the calling process or inherited events from a parent process.
+Only group leaders are enabled and disabled,
+not any other members of the groups.
 .SS perf_event related configuration files
+.PP
 Files in
 .I /proc/sys/kernel/
 .RS 4
 .TP
 .I /proc/sys/kernel/perf_event_paranoid
-
 The
 .I perf_event_paranoid
 file can be set to restrict access to the performance counters.
-
-2 - only allow user-space measurements
-
-1 - (default) allow both kernel and user measurements
-
-0 - allow access to CPU-specific data but not raw tracepoint samples
-
-\-1 - no restrictions
-
+.IP
+.PD 0
+.RS
+.IP 2 4
+allow only user-space measurements (default since Linux 4.6).
+.\" default changed in commit 0161028b7c8aebef64194d3d73e43bc3b53b5c66
+.IP 1
+allow both kernel and user measurements (default before Linux 4.6).
+.IP 0
+allow access to CPU-specific data but not raw tracepoint samples.
+.IP \-1
+no restrictions.
+.RE
+.PD
+.IP
 The existence of the
 .I perf_event_paranoid
 file is the official method for determining if a kernel supports
 .BR perf_event_open ().
 .TP
 .I /proc/sys/kernel/perf_event_max_sample_rate
-
 This sets the maximum sample rate.
 Setting this too high can allow
 users to sample at a rate that impacts overall machine performance
@@ -1954,71 +3046,96 @@ and potentially lock up the machine.
 The default value is
 100000 (samples per second).
 .TP
+.I /proc/sys/kernel/perf_event_max_stack
+.\" Introduced in c5dfd78eb79851e278b7973031b9ca363da87a7e
+This file sets the maximum depth of stack frame entries reported
+when generating a call trace.
+.TP
 .I /proc/sys/kernel/perf_event_mlock_kb
-
-Maximum number of pages an unprivileged user can mlock (2) .
+Maximum number of pages an unprivileged user can
+.BR mlock (2).
 The default is 516 (kB).
-
 .RE
+.PP
 Files in
 .I /sys/bus/event_source/devices/
+.PP
 .RS 4
-Since Linux 2.6.34 the kernel supports having multiple PMUs
+Since Linux 2.6.34, the kernel supports having multiple PMUs
 available for monitoring.
 Information on how to program these PMUs can be found under
 .IR /sys/bus/event_source/devices/ .
 Each subdirectory corresponds to a different PMU.
 .TP
-.IR /sys/bus/event_source/devices/*/type " (Since Linux 2.6.38)"
+.IR /sys/bus/event_source/devices/*/type " (since Linux 2.6.38)"
+.\" commit abe43400579d5de0078c2d3a760e6598e183f871
 This contains an integer that can be used in the
 .I type
-field of perf_event_attr to indicate you wish to use this PMU.
+field of
+.I perf_event_attr
+to indicate that you wish to use this PMU.
 .TP
-.IR /sys/bus/event_source/devices/*/rdpmc " (Since Linux 3.4)"
+.IR /sys/bus/event_source/devices/cpu/rdpmc " (since Linux 3.4)"
+.\" commit 0c9d42ed4cee2aa1dfc3a260b741baae8615744f
 If this file is 1, then direct user-space access to the
 performance counter registers is allowed via the rdpmc instruction.
 This can be disabled by echoing 0 to the file.
-.TP
-.IR /sys/bus/event_source/devices/*/format/ " (Since Linux 3.4)"
-This sub-directory contains information on the architecture-specific
-sub-fields available for programming the various
+.IP
+As of Linux 4.0
+.\" a66734297f78707ce39d756b656bfae861d53f62
+.\" 7911d3f7af14a614617e38245fedf98a724e46a9
+the behavior has changed, so that 1 now means only allow access
+to processes with active perf events, with 2 indicating the old
+allow-anyone-access behavior.
+.TP
+.IR /sys/bus/event_source/devices/*/format/ " (since Linux 3.4)"
+.\" commit 641cc938815dfd09f8fa1ec72deb814f0938ac33
+This subdirectory contains information on the architecture-specific
+subfields available for programming the various
 .I config
-fields in the perf_event_attr struct.
-
+fields in the
+.I perf_event_attr
+struct.
+.IP
 The content of each file is the name of the config field, followed
 by a colon, followed by a series of integer bit ranges separated by
 commas.
 For example, the file
 .I event
 may contain the value
-.I config1:1,6-10,44
-which indicates that event is an attribute that occupies bits 1,6-10, and 44
-of perf_event_attr::config1.
+.I config1:1,6\-10,44
+which indicates that event is an attribute that occupies bits 1,6\(en10, and 44
+of
+.IR perf_event_attr::config1 .
 .TP
-.IR /sys/bus/event_source/devices/*/events/ " (Since Linux 3.4)"
-This sub-directory contains files with pre-defined events.
+.IR /sys/bus/event_source/devices/*/events/ " (since Linux 3.4)"
+.\" commit 641cc938815dfd09f8fa1ec72deb814f0938ac33
+This subdirectory contains files with predefined events.
 The contents are strings describing the event settings
 expressed in terms of the fields found in the previously mentioned
 .I ./format/
 directory.
 These are not necessarily complete lists of all events supported by
 a PMU, but usually a subset of events deemed useful or interesting.
-
+.IP
 The content of each file is a list of attribute names
 separated by commas.
 Each entry has an optional value (either hex or decimal).
-If no value is specified than it is assumed to be a single-bit
+If no value is specified, then it is assumed to be a single-bit
 field with a value of 1.
 An example entry may look like this:
-.I event=0x2,inv,ldlat=3
+.IR event=0x2,inv,ldlat=3 .
 .TP
 .I /sys/bus/event_source/devices/*/uevent
 This file is the standard kernel device interface
 for injecting hotplug events.
 .TP
-.IR /sys/bus/event_source/devices/*/cpumask " (Since Linux 3.7)"
-The cpumask file contains a comma-separated list of integers that
-indicate a representative cpu number for each socket (package)
+.IR /sys/bus/event_source/devices/*/cpumask " (since Linux 3.7)"
+.\" commit 314d9f63f385096580e9e2a06eaa0745d92fe4ac
+The
+.I cpumask
+file contains a comma-separated list of integers that
+indicate a representative CPU number for each socket (package)
 on the motherboard.
 This is needed when setting up uncore or northbridge events, as
 those PMUs present socket-wide events.
@@ -2030,34 +3147,172 @@ returns the new file descriptor, or \-1 if an error occurred
 .I errno
 is set appropriately).
 .SH ERRORS
+The errors returned by
+.BR perf_event_open ()
+can be inconsistent, and may
+vary across processor architectures and performance monitoring units.
+.TP
+.B E2BIG
+Returned if the
+.I perf_event_attr
+.I size
+value is too small
+(smaller than
+.BR PERF_ATTR_SIZE_VER0 ),
+too big (larger than the page size),
+or larger than the kernel supports and the extra bytes are not zero.
+When
+.B E2BIG
+is returned, the
+.I perf_event_attr
+.I size
+field is overwritten by the kernel to be the size of the structure
+it was expecting.
+.TP
+.B EACCES
+Returned when the requested event requires
+.B CAP_SYS_ADMIN
+permissions (or a more permissive perf_event paranoid setting).
+Some common cases where an unprivileged process
+may encounter this error:
+attaching to a process owned by a different user;
+monitoring all processes on a given CPU (i.e., specifying the
+.I pid
+argument as \-1);
+and not setting
+.I exclude_kernel
+when the paranoid setting requires it.
+.TP
+.B EBADF
+Returned if the
+.I group_fd
+file descriptor is not valid, or, if
+.B PERF_FLAG_PID_CGROUP
+is set,
+the cgroup file descriptor in
+.I pid
+is not valid.
+.TP
+.BR EBUSY " (since Linux 4.1)"
+.\" bed5b25ad9c8a2f5d735ef0bc746ec870c01c1b0
+Returned if another event already has exclusive
+access to the PMU.
+.TP
+.B EFAULT
+Returned if the
+.I attr
+pointer points at an invalid memory address.
 .TP
 .B EINVAL
-Returned if the specified event is not available.
+Returned if the specified event is invalid.
+There are many possible reasons for this.
+A not-exhaustive list:
+.I sample_freq
+is higher than the maximum setting;
+the
+.I cpu
+to monitor does not exist;
+.I read_format
+is out of range;
+.I sample_type
+is out of range;
+the
+.I flags
+value is out of range;
+.I exclusive
+or
+.I pinned
+set and the event is not a group leader;
+the event
+.I config
+values are out of range or set reserved bits;
+the generic event selected is not supported; or
+there is not enough room to add the selected event.
+.TP
+.B EMFILE
+Each opened event uses one file descriptor.
+If a large number of events are opened,
+the per-process limit on the number of open file descriptors will be reached,
+and no more events can be created.
+.TP
+.B ENODEV
+Returned when the event involves a feature not supported
+by the current CPU.
+.TP
+.B ENOENT
+Returned if the
+.I type
+setting is not valid.
+This error is also returned for
+some unsupported generic events.
 .TP
 .B ENOSPC
 Prior to Linux 3.3, if there was not enough room for the event,
+.\" commit aa2bc1ade59003a379ffc485d6da2d92ea3370a6
 .B ENOSPC
 was returned.
-Linus did not like this, and this was changed to
+In Linux 3.3, this was changed to
 .BR EINVAL .
 .B ENOSPC
-is still returned if you try to read results into
-too small of a buffer.
+is still returned if you try to add more breakpoint events
+than supported by the hardware.
+.TP
+.B ENOSYS
+Returned if
+.B PERF_SAMPLE_STACK_USER
+is set in
+.I sample_type
+and it is not supported by hardware.
+.TP
+.B EOPNOTSUPP
+Returned if an event requiring a specific hardware feature is
+requested but there is no hardware support.
+This includes requesting low-skid events if not supported,
+branch tracing if it is not available, sampling if no PMU
+interrupt is available, and branch stacks for software events.
+.TP
+.BR EOVERFLOW " (since Linux 4.8)"
+.\" 97c79a38cd454602645f0470ffb444b3b75ce574
+Returned if
+.B PERF_SAMPLE_CALLCHAIN
+is requested and
+.I sample_max_stack
+is larger than the maximum specified in
+.IR /proc/sys/kernel/perf_event_max_stack .
+.TP
+.B EPERM
+Returned on many (but not all) architectures when an unsupported
+.IR exclude_hv ", " exclude_idle ", " exclude_user ", or " exclude_kernel
+setting is specified.
+.IP
+It can also happen, as with
+.BR EACCES ,
+when the requested event requires
+.B CAP_SYS_ADMIN
+permissions (or a more permissive perf_event paranoid setting).
+This includes setting a breakpoint on a kernel address,
+and (since Linux 3.13) setting a kernel function-trace tracepoint.
+.\" commit a4e95fc2cbb31d70a65beffeaf8773f881328c34
+.TP
+.B ESRCH
+Returned if attempting to attach to a process that does not exist.
 .SH VERSION
 .BR perf_event_open ()
 was introduced in Linux 2.6.31 but was called
-.BR perf_counter_open () .
+.\" commit 0793a61d4df8daeac6492dbf8d2f3e5713caae5e
+.BR perf_counter_open ().
 It was renamed in Linux 2.6.32.
+.\" commit cdd6c482c9ff9c55475ee7392ec8f672eddb7be6
 .SH CONFORMING TO
 This
 .BR perf_event_open ()
-system call Linux- specific
+system call Linux-specific
 and should not be used in programs intended to be portable.
 .SH NOTES
 Glibc does not provide a wrapper for this system call; call it using
 .BR syscall (2).
 See the example below.
-
+.PP
 The official way of knowing if
 .BR perf_event_open ()
 support is enabled is checking
@@ -2070,56 +3325,74 @@ option to
 .BR fcntl (2)
 is needed to properly get overflow signals in threads.
 This was introduced in Linux 2.6.32.
-
-Prior to Linux 2.6.33 (at least for x86) the kernel did not check
+.\" commit ba0a6c9f6fceed11c6a99e8326f0477fe383e6b5
+.PP
+Prior to Linux 2.6.33 (at least for x86),
+.\" commit b690081d4d3f6a23541493f1682835c3cd5c54a1
+the kernel did not check
 if events could be scheduled together until read time.
 The same happens on all known kernels if the NMI watchdog is enabled.
 This means to see if a given set of events works you have to
 .BR perf_event_open (),
 start, then read before you know for sure you
 can get valid measurements.
-
-Prior to Linux 2.6.34 event constraints were not enforced by the kernel.
+.PP
+Prior to Linux 2.6.34,
+.\" FIXME . cannot find a kernel commit for this one
+event constraints were not enforced by the kernel.
 In that case, some events would silently return "0" if the kernel
 scheduled them in an improper counter slot.
-
-Prior to Linux 2.6.34 there was a bug when multiplexing where the
+.PP
+Prior to Linux 2.6.34, there was a bug when multiplexing where the
 wrong results could be returned.
-
+.\" commit 45e16a6834b6af098702e5ea6c9a40de42ff77d8
+.PP
 Kernels from Linux 2.6.35 to Linux 2.6.39 can quickly crash the kernel if
 "inherit" is enabled and many threads are started.
-
+.\" commit 38b435b16c36b0d863efcf3f07b34a6fac9873fd
+.PP
 Prior to Linux 2.6.35,
+.\" commit 050735b08ca8a016bbace4445fa025b88fee770b
 .B PERF_FORMAT_GROUP
 did not work with attached processes.
-
-In older Linux 2.6 versions,
-refreshing an event group leader refreshed all siblings,
-and refreshing with a parameter of 0 enabled infinite refresh.
-This behavior is unsupported and should not be relied on.
-
+.PP
 There is a bug in the kernel code between
 Linux 2.6.36 and Linux 3.0 that ignores the
 "watermark" field and acts as if a wakeup_event
 was chosen if the union has a
-non-zero value in it.
-
+nonzero value in it.
+.\" commit 4ec8363dfc1451f8c8f86825731fe712798ada02
+.PP
 From Linux 2.6.31 to Linux 3.4, the
 .B PERF_IOC_FLAG_GROUP
 ioctl argument was broken and would repeatedly operate
 on the event specified rather than iterating across
 all sibling events in a group.
-
+.\" commit 724b6daa13e100067c30cfc4d1ad06629609dc4e
+.PP
+From Linux 3.4 to Linux 3.11, the mmap
+.\" commit fa7315871046b9a4c48627905691dbde57e51033
+.I cap_usr_rdpmc
+and
+.I cap_usr_time
+bits mapped to the same location.
+Code should migrate to the new
+.I cap_user_rdpmc
+and
+.I cap_user_time
+fields instead.
+.PP
 Always double-check your results!
 Various generalized events have had wrong values.
 For example, retired branches measured
 the wrong thing on AMD machines until Linux 2.6.35.
+.\" commit f287d332ce835f77a4f5077d2c0ef1e3f9ea42d2
 .SH EXAMPLE
 The following is a short example that measures the total
 instruction count of a call to
 .BR printf (3).
-.nf
-
+.PP
+.EX
 #include <stdlib.h>
 #include <stdio.h>
 #include <unistd.h>
@@ -2128,7 +3401,7 @@ instruction count of a call to
 #include <linux/perf_event.h>
 #include <asm/unistd.h>
 
-long
+static long
 perf_event_open(struct perf_event_attr *hw_event, pid_t pid,
                 int cpu, int group_fd, unsigned long flags)
 {
@@ -2172,8 +3445,9 @@ main(int argc, char **argv)
 
     close(fd);
 }
-.fi
+.EE
 .SH SEE ALSO
+.BR perf (1),
 .BR fcntl (2),
 .BR mmap (2),
 .BR open (2),
-- 
2.17.1