Blob Blame History Raw
diff --git a/Mailman/Bouncers/SimpleMatch.py b/Mailman/Bouncers/SimpleMatch.py
index a6a952a..0901b50 100644
--- a/Mailman/Bouncers/SimpleMatch.py
+++ b/Mailman/Bouncers/SimpleMatch.py
@@ -42,7 +42,7 @@ PATTERNS = [
     # sz-sb.de, corridor.com, nfg.nl
     (_c('the following addresses had'),
      _c('transcript of session follows'),
-     _c(r'<(?P<fulladdr>[^>]*)>|\(expanded from: <?(?P<addr>[^>)]*)>?\)')),
+     _c(r'^ *(\(expanded from: )?<?(?P<addr>[^\s@]+@[^\s@>]+?)>?\)?\s*$')),
     # robanal.demon.co.uk
     (_c('this message was created automatically by mail delivery software'),
      _c('original message follows'),
diff --git a/Mailman/Bouncers/Yahoo.py b/Mailman/Bouncers/Yahoo.py
index b3edf4f..08ede54 100644
--- a/Mailman/Bouncers/Yahoo.py
+++ b/Mailman/Bouncers/Yahoo.py
@@ -20,9 +20,15 @@ import re
 import email
 from email.Utils import parseaddr
 
-tcre = re.compile(r'message\s+from\s+yahoo\.\S+', re.IGNORECASE)
+tcre = (re.compile(r'message\s+from\s+yahoo\.\S+', re.IGNORECASE),
+        re.compile(r'Sorry, we were unable to deliver your message to '
+                   r'the following address(\(es\))?\.',
+                   re.IGNORECASE),
+        )
 acre = re.compile(r'<(?P<addr>[^>]*)>:')
-ecre = re.compile(r'--- Original message follows')
+ecre = (re.compile(r'--- Original message follows'),
+        re.compile(r'--- Below this line is a copy of the message'),
+        )
 
 
 
@@ -36,18 +42,26 @@ def process(msg):
     # simple state machine
     #     0 == nothing seen
     #     1 == tag line seen
+    #     2 == end line seen
     state = 0
     for line in email.Iterators.body_line_iterator(msg):
         line = line.strip()
-        if state == 0 and tcre.match(line):
-            state = 1
+        if state == 0:
+            for cre in tcre:
+                if cre.match(line):
+                    state = 1
+                    break
         elif state == 1:
             mo = acre.match(line)
             if mo:
                 addrs.append(mo.group('addr'))
                 continue
-            mo = ecre.match(line)
-            if mo:
-                # we're at the end of the error response
-                break
+            for cre in ecre:
+                mo = cre.match(line)
+                if mo:
+                    # we're at the end of the error response
+                    state = 2
+                    break
+        elif state == 2:
+            break
     return addrs
diff --git a/Mailman/Defaults.py.in b/Mailman/Defaults.py.in
old mode 100644
new mode 100755
index 4fe63db..8e42f54
--- a/Mailman/Defaults.py.in
+++ b/Mailman/Defaults.py.in
@@ -505,6 +505,7 @@ GLOBAL_PIPELINE = [
     # (outgoing) path, finally leaving the message in the outgoing queue.
     'AfterDelivery',
     'Acknowledge',
+    'WrapMessage',
     'ToOutgoing',
     ]
 
@@ -914,6 +915,29 @@ DEFAULT_DEFAULT_MEMBER_MODERATION = No
 # moderators?
 DEFAULT_FORWARD_AUTO_DISCARDS = Yes
 
+# Shall dmarc_moderation_action be applied to messages From: domains with
+# a DMARC policy of quarantine as well as reject?  This sets the default for
+# the list setting that controls it.
+DEFAULT_DMARC_QUARANTINE_MODERATION_ACTION = Yes
+
+# Default action for posts whose From: address domain has a DMARC policy of
+# reject or quarantine.  See DEFAULT_FROM_IS_LIST below.  Whatever is set as
+# the default here precludes the list owner from setting a lower value.
+# 0 = Accept
+# 1 = Munge From
+# 2 = Wrap Message
+# 3 = Reject
+# 4 = Discard
+DEFAULT_DMARC_MODERATION_ACTION = 0
+
+# Parameters for DMARC DNS lookups. If you are seeing 'DNSException:
+# Unable to query DMARC policy ...' entries in your error log, you may need
+# to adjust these.
+# The time to wait for a response from a name server before timeout.
+DMARC_RESOLVER_TIMEOUT = seconds(3)
+# The total time to spend trying to get an answer to the question.
+DMARC_RESOLVER_LIFETIME = seconds(5)
+
 # What shold happen to non-member posts which are do not match explicit
 # non-member actions?
 # 0 = Accept
@@ -950,6 +974,25 @@ DEFAULT_SEND_WELCOME_MSG = Yes
 # Send goodbye messages to unsubscribed members?
 DEFAULT_SEND_GOODBYE_MSG = Yes
 
+# Some list posts and mail to the -owner address may contain DomainKey or
+# DomainKeys Identified Mail (DKIM) signature headers <http://www.dkim.org/>.
+# Various list transformations to the message such as adding a list header or
+# footer or scrubbing attachments or even reply-to munging can break these
+# signatures.  It is generally felt that these signatures have value, even if
+# broken and even if the outgoing message is resigned.  However, some sites
+# may wish to remove these headers by setting this to Yes.
+REMOVE_DKIM_HEADERS = No
+
+# The following is a three way setting.  It sets the default for the list's
+# from_is_list policy which is applied to all posts except those for which a
+# dmarc_moderation_action other than accept applies.
+# 0 -> Do not rewrite the From: or wrap the message.
+# 1 -> Rewrite the From: header of posts replacing the posters address with
+#      that of the list.  Also see REMOVE_DKIM_HEADERS above.
+# 2 -> Do not modify the From: of the message, but wrap the message in an outer
+#      message From the list address.
+DEFAULT_FROM_IS_LIST = 0
+
 # Wipe sender information, and make it look like the list-admin
 # address sends all messages
 DEFAULT_ANONYMOUS_LIST = No
diff --git a/Mailman/Gui/General.py b/Mailman/Gui/General.py
index 8271a30..05dc9ba 100644
--- a/Mailman/Gui/General.py
+++ b/Mailman/Gui/General.py
@@ -153,6 +153,72 @@ class General(GUIBase):
                             (listname %%05d) -> (listname 00123)
              """)),
 
+            ('from_is_list', mm_cfg.Radio,
+             (_('No'), _('Munge From'), _('Wrap Message')), 0,
+             _("""Replace the From: header address with the list's posting
+             address to mitigate issues stemming from the original From:
+             domain's DMARC or similar policies."""),
+             _("""Several protocols now in wide use attempt to ensure that use
+             of the domain in the author's address (ie, in the From: header
+             field) is authorized by that domain.  These protocols may be
+             incompatible with common list features such as footers, causing
+             participating email services to bounce list traffic merely
+             because of the address in the From: field.  <b>This has resulted
+             in members being unsubscribed despite being perfectly able to
+             receive mail.</b>
+             <p>
+             The following actions are applied to all list messages when
+             selected here.  To apply these actions only to messages where the
+             domain in the From: header is determined to use such a protocol,
+             see the <a
+             href="?VARHELP=privacy/sender/dmarc_moderation_action">
+             dmarc_moderation_action</a> settings under Privacy options...
+             -&gt; Sender filters.
+             <p>Settings:<p>
+             <dl>
+             <dt>No</dt>
+             <dd>Do nothing special.  This is appropriate for anonymous lists.
+             It is appropriate for dedicated announcement lists, unless the
+             From: address of authorized posters might be in a domain with a
+             DMARC or similar policy. It is also appropriate if you choose to
+             use dmarc_moderation_action other than Accept for this list.</dd>
+             <dt>Munge From</dt>
+             <dd>This action replaces the poster's address in the From: header
+             with the list's posting address and adds the poster's address to
+             the addresses in the original Reply-To: header.</dd>
+             <dt>Wrap Message</dt>
+             <dd>Just wrap the message in an outer message with the From:
+             header containing the list's posting address and with the original
+             From: address added to the addresses in the original Reply-To:
+             header and with Content-Type: message/rfc822.  This is effectively
+             a one message MIME format digest.</dd>
+             </dl>
+             <p>The transformations for anonymous_list are applied before
+             any of these actions. It is not useful to apply actions other
+             than No to an anonymous list, and if you do so, the result may
+             be surprising.
+             <p>The Reply-To: header munging actions below interact with these
+             actions as follows:
+             <p> first_strip_reply_to = Yes will remove all the incoming
+             Reply-To: addresses but will still add the poster's address to
+             Reply-To: for all three settings of reply_goes_to_list which
+             respectively will result in just the poster's address, the
+             poster's address and the list posting address or the poster's
+             address and the explicit reply_to_address in the outgoing
+             Reply-To: header. If first_strip_reply_to = No the poster's
+             address in the original From: header, if not already included in
+             the Reply-To:, will be added to any existing Reply-To:
+             address(es).
+             <p>These actions, whether selected here or via <a
+             href="?VARHELP=privacy/sender/dmarc_moderation_action">
+             dmarc_moderation_action</a>, do not apply to messages in digests
+             or archives or sent to usenet via the Mail&lt;-&gt;News gateways.
+             <p>If <a
+             href="?VARHELP=privacy/sender/dmarc_moderation_action">
+             dmarc_moderation_action</a> applies to this message with an
+             action other than Accept, that action rather than this is
+             applied""")),
+
             ('anonymous_list', mm_cfg.Radio, (_('No'), _('Yes')), 0,
              _("""Hide the sender of a message, replacing it with the list
              address (Removes From, Sender and Reply-To fields)""")),
diff --git a/Mailman/Gui/NonDigest.py b/Mailman/Gui/NonDigest.py
old mode 100644
new mode 100755
diff --git a/Mailman/Gui/Privacy.py b/Mailman/Gui/Privacy.py
index 75eff2b..5d717bb 100644
--- a/Mailman/Gui/Privacy.py
+++ b/Mailman/Gui/Privacy.py
@@ -158,6 +158,11 @@ class Privacy(GUIBase):
             ]
 
         adminurl = mlist.GetScriptURL('admin', absolute=1)
+    
+        if mlist.dmarc_quarantine_moderation_action:
+            quarantine = _('/Quarantine')
+        else:
+            quarantine = ''
         sender_rtn = [
             _("""When a message is posted to the list, a series of
             moderation steps are taken to decide whether a moderator must
@@ -235,6 +240,59 @@ class Privacy(GUIBase):
              >rejection notice</a> to
              be sent to moderated members who post to this list.""")),
 
+            ('dmarc_moderation_action', mm_cfg.Radio,
+             (_('Accept'), _('Munge From'), _('Wrap Message'), _('Reject'),
+                 _('Discard')), 0,
+             _("""Action to take when anyone posts to the
+             list from a domain with a DMARC Reject%(quarantine)s Policy."""),
+
+             _("""<ul><li><b>Munge From</b> -- applies the <a
+             href="?VARHELP=general/from_is_list">from_is_list Munge From</a>
+             transformation to these messages.
+
+             <p><li><b>Wrap Message</b> -- applies the <a
+             href="?VARHELP=general/from_is_list">from_is_list Wrap
+             Message</a> transformation to these messages.
+
+             <p><li><b>Reject</b> -- this automatically rejects the message by
+             sending a bounce notice to the post's author.  The text of the
+             bounce notice can be <a
+             href="?VARHELP=privacy/sender/dmarc_moderation_notice"
+             >configured by you</a>.
+
+             <p><li><b>Discard</b> -- this simply discards the message, with
+             no notice sent to the post's author.
+             </ul>
+
+             <p>This setting takes precedence over the <a
+             href="?VARHELP=general/from_is_list"> from_is_list</a> setting
+             if the message is From: an affected domain and the setting is
+             other than Accept.""")),
+
+            ('dmarc_quarantine_moderation_action', mm_cfg.Radio,
+             (_('No'), _('Yes')), 0,
+             _("""Shall the above dmarc_moderation_action apply to messages
+               From: domains with DMARC p=quarantine as well as p=reject"""),
+
+             _("""<ul><li><b>No</b> -- this applies dmarc_moderation_action to
+               only those posts From: a domain with DMARC p=reject.  This is
+               appropriate if you are concerned about bounced messages, but
+               want to apply dmarc_moderation_action to as few messages as
+               possible.
+               <p><li><b>Yes</b> -- this applies dmarc_moderation_action to
+               posts From: a domain with DMARC p=reject or p=quarantine.
+               </ul><p>If a message is From: a domain with DMARC p=quarantine
+               and dmarc_moderation_action is not applied (this set to No)
+               the message will likely not bounce, but will be delivered to
+               recipients' spam folders or other hard to find places.""")),
+
+            ('dmarc_moderation_notice', mm_cfg.Text, (10, WIDTH), 1,
+             _("""Text to include in any
+             <a href="?VARHELP=privacy/sender/dmarc_moderation_action"
+             >rejection notice</a> to
+             be sent to anyone who posts to this list from a domain
+             with a DMARC Reject%(quarantine)s Policy.""")),
+
             _('Non-member filters'),
 
             ('accept_these_nonmembers', mm_cfg.EmailListEx, (10, WIDTH), 1,
@@ -399,7 +457,7 @@ class Privacy(GUIBase):
              case, each rule is matched in turn, with processing stopped after
              the first match.
 
-             Note that headers are collected from all the attachments 
+             Note that headers are collected from all the attachments
              (except for the mailman administrivia message) and
              matched against the regular expressions. With this feature,
              you can effectively sort out messages with dangerous file
@@ -442,6 +500,11 @@ class Privacy(GUIBase):
         # an option.
         if property == 'subscribe_policy' and not mm_cfg.ALLOW_OPEN_SUBSCRIBE:
             val += 1
+        if (property == 'dmarc_moderation_action' and
+                val < mm_cfg.DEFAULT_DMARC_MODERATION_ACTION):
+            doc.addError(_("""dmarc_moderation_action must be >= the configured
+                           default value."""))
+            val = mm_cfg.DEFAULT_DMARC_MODERATION_ACTION
         setattr(mlist, property, val)
 
     # We need to handle the header_filter_rules widgets specially, but
diff --git a/Mailman/Handlers/AvoidDuplicates.py b/Mailman/Handlers/AvoidDuplicates.py
index 038034c..549d8e7 100644
--- a/Mailman/Handlers/AvoidDuplicates.py
+++ b/Mailman/Handlers/AvoidDuplicates.py
@@ -24,6 +24,7 @@ warning header, or pass it through, depending on the user's preferences.
 
 from email.Utils import getaddresses, formataddr
 from Mailman import mm_cfg
+from Mailman.Handlers.CookHeaders import change_header
 
 COMMASPACE = ', '
 
@@ -95,6 +96,10 @@ def process(mlist, msg, msgdata):
     # Set the new list of recipients
     msgdata['recips'] = newrecips
     # RFC 2822 specifies zero or one CC header
-    del msg['cc']
     if ccaddrs:
-        msg['Cc'] = COMMASPACE.join([formataddr(i) for i in ccaddrs.values()])
+        change_header('Cc',
+        COMMASPACE.join([formataddr(i) for i in ccaddrs.values()]),
+        mlist, msg, msgdata)
+    else:
+        del msg['cc']
+
diff --git a/Mailman/Handlers/CookHeaders.py b/Mailman/Handlers/CookHeaders.py
old mode 100644
new mode 100755
index 8e7e668..c556967
--- a/Mailman/Handlers/CookHeaders.py
+++ b/Mailman/Handlers/CookHeaders.py
@@ -64,13 +64,23 @@ def uheader(mlist, s, header_name=None, continuation_ws='\t', maxlinelen=None):
         charset = 'us-ascii'
     return Header(s, charset, maxlinelen, header_name, continuation_ws)
 
+def change_header(name, value, mlist, msg, msgdata, delete=True, repl=True):
+    if ((msgdata.get('from_is_list') == 2 or
+        (msgdata.get('from_is_list') == 0 and mlist.from_is_list == 2)) and 
+        not msgdata.get('_fasttrack')
+       ) or name.lower() in ('from', 'reply-to'):
+        msgdata.setdefault('add_header', {})[name] = value
+    elif repl or not msg.has_key(name):
+        if delete:
+            del msg[name]
+        msg[name] = value
+
 
 
 def process(mlist, msg, msgdata):
     # Set the "X-Ack: no" header if noack flag is set.
     if msgdata.get('noack'):
-        del msg['x-ack']
-        msg['X-Ack'] = 'no'
+        change_header('X-Ack', 'no', mlist, msg, msgdata)
     # Because we're going to modify various important headers in the email
     # message, we want to save some of the information in the msgdata
     # dictionary for later.  Specifically, the sender header will get waxed,
@@ -87,7 +97,8 @@ def process(mlist, msg, msgdata):
             pass
     # Mark message so we know we've been here, but leave any existing
     # X-BeenThere's intact.
-    msg['X-BeenThere'] = mlist.GetListEmail()
+    change_header('X-BeenThere', mlist.GetListEmail(),
+                  mlist, msg, msgdata, delete=False)
     # Add Precedence: and other useful headers.  None of these are standard
     # and finding information on some of them are fairly difficult.  Some are
     # just common practice, and we'll add more here as they become necessary.
@@ -101,12 +112,31 @@ def process(mlist, msg, msgdata):
     # known exploits in a particular version of Mailman and we know a site is
     # using such an old version, they may be vulnerable.  It's too easy to
     # edit the code to add a configuration variable to handle this.
-    if not msg.has_key('x-mailman-version'):
-        msg['X-Mailman-Version'] = mm_cfg.VERSION
+    change_header('X-Mailman-Version', mm_cfg.VERSION,
+                  mlist, msg, msgdata, repl=False)
     # We set "Precedence: list" because this is the recommendation from the
     # sendmail docs, the most authoritative source of this header's semantics.
-    if not msg.has_key('precedence'):
-        msg['Precedence'] = 'list'
+    change_header('Precedence', 'list',
+                  mlist, msg, msgdata, repl=False)
+    # Do we change the from so the list takes ownership of the email
+    if (msgdata.get('from_is_list') or mlist.from_is_list) and not fasttrack:
+        realname, email = parseaddr(msg['from'])
+        if not realname:
+            if mlist.isMember(email):
+                realname = mlist.getMemberName(email) or email
+            else:
+                realname = email
+        # Remove domain from realname if it looks like an email address
+        realname = re.sub(r'@([^ .]+\.)+[^ .]+$', '---', realname)
+        # Remember the original From: here for adding to Reply-To: below.
+        o_from = parseaddr(msg['from'])
+        change_header('From',
+                      formataddr(('%s via %s' % (realname, mlist.real_name),
+                                 mlist.GetListEmail())),
+                      mlist, msg, msgdata)
+    else:
+        # Use this as a flag
+        o_from = None
     # Reply-To: munging.  Do not do this if the message is "fast tracked",
     # meaning it is internally crafted and delivered to a specific user.  BAW:
     # Yuck, I really hate this feature but I've caved under the sheer pressure
@@ -136,18 +166,23 @@ def process(mlist, msg, msgdata):
             orig = msg.get_all('reply-to', [])
             for pair in getaddresses(orig):
                 add(pair)
+        # We also need to put the old From: in Reply-To: in all cases.
+        if o_from:
+            add(o_from)
         # Set Reply-To: header to point back to this list.  Add this last
         # because some folks think that some MUAs make it easier to delete
         # addresses from the right than from the left.
         if mlist.reply_goes_to_list == 1:
             i18ndesc = uheader(mlist, mlist.description, 'Reply-To')
             add((str(i18ndesc), mlist.GetListEmail()))
-        del msg['reply-to']
         # Don't put Reply-To: back if there's nothing to add!
         if new:
             # Preserve order
-            msg['Reply-To'] = COMMASPACE.join(
-                [formataddr(pair) for pair in new])
+            change_header('Reply-To', 
+                          COMMASPACE.join([formataddr(pair) for pair in new]),
+                          mlist, msg, msgdata)
+        else:
+            del msg['reply-to']
         # The To field normally contains the list posting address.  However
         # when messages are fully personalized, that header will get
         # overwritten with the address of the recipient.  We need to get the
@@ -158,18 +193,31 @@ def process(mlist, msg, msgdata):
         # above code?
         # Also skip Cc if this is an anonymous list as list posting address
         # is already in From and Reply-To in this case.
-        if mlist.personalize == 2 and mlist.reply_goes_to_list <> 1 \
-           and not mlist.anonymous_list:
+        # We do add the Cc in cases where From: header munging is being done
+        # because even though the list address is in From:, the Reply-To:
+        # poster will override it. Brain dead MUAs may then address the list
+        # twice on a 'reply all', but reasonable MUAs should do the right
+        # thing.
+        if (mlist.personalize == 2 and mlist.reply_goes_to_list <> 1 and
+            not mlist.anonymous_list):
             # Watch out for existing Cc headers, merge, and remove dups.  Note
             # that RFC 2822 says only zero or one Cc header is allowed.
             new = []
             d = {}
-            for pair in getaddresses(msg.get_all('cc', [])):
-                add(pair)
+            # AvoidDuplicates may have set a new Cc: in msgdata.add_header,
+            # so check that.
+            if (msgdata.has_key('add_header') and
+                    msgdata['add_header'].has_key('Cc')):
+                for pair in getaddresses([msgdata['add_header']['Cc']]):
+                    add(pair)
+            else:
+                for pair in getaddresses(msg.get_all('cc', [])):
+                    add(pair)
             i18ndesc = uheader(mlist, mlist.description, 'Cc')
             add((str(i18ndesc), mlist.GetListEmail()))
-            del msg['Cc']
-            msg['Cc'] = COMMASPACE.join([formataddr(pair) for pair in new])
+            change_header('Cc',
+                          COMMASPACE.join([formataddr(pair) for pair in new]),
+                          mlist, msg, msgdata)
     # Add list-specific headers as defined in RFC 2369 and RFC 2919, but only
     # if the message is being crafted for a specific list (e.g. not for the
     # password reminders).
@@ -191,8 +239,7 @@ def process(mlist, msg, msgdata):
         # without desc we need to ensure the MUST brackets
         listid_h = '<%s>' % listid
     # We always add a List-ID: header.
-    del msg['list-id']
-    msg['List-Id'] = listid_h
+    change_header('List-Id', listid_h, mlist, msg, msgdata)
     # For internally crafted messages, we also add a (nonstandard),
     # "X-List-Administrivia: yes" header.  For all others (i.e. those coming
     # from list posts), we add a bunch of other RFC 2369 headers.
@@ -219,13 +266,12 @@ def process(mlist, msg, msgdata):
     # First we delete any pre-existing headers because the RFC permits only
     # one copy of each, and we want to be sure it's ours.
     for h, v in headers.items():
-        del msg[h]
         # Wrap these lines if they are too long.  78 character width probably
         # shouldn't be hardcoded, but is at least text-MUA friendly.  The
         # adding of 2 is for the colon-space separator.
         if len(h) + 2 + len(v) > 78:
             v = CONTINUATION.join(v.split(', '))
-        msg[h] = v
+        change_header(h, v, mlist, msg, msgdata)
 
 
 
@@ -302,8 +348,7 @@ def prefix_subject(mlist, msg, msgdata):
                     h = u' '.join([prefix, subject])
             h = h.encode('us-ascii')
             h = uheader(mlist, h, 'Subject', continuation_ws=ws)
-            del msg['subject']
-            msg['Subject'] = h
+            change_header('Subject', h, mlist, msg, msgdata)
             ss = u' '.join([recolon, subject])
             ss = ss.encode('us-ascii')
             ss = uheader(mlist, ss, 'Subject', continuation_ws=ws)
@@ -321,8 +366,7 @@ def prefix_subject(mlist, msg, msgdata):
     # TK: Subject is concatenated and unicode string.
     subject = subject.encode(cset, 'replace')
     h.append(subject, cset)
-    del msg['subject']
-    msg['Subject'] = h
+    change_header('Subject', h, mlist, msg, msgdata)
     ss = uheader(mlist, recolon, 'Subject', continuation_ws=ws)
     ss.append(subject, cset)
     msgdata['stripped_subject'] = ss
diff --git a/Mailman/Handlers/Moderate.py b/Mailman/Handlers/Moderate.py
index a362d96..2f1f38f 100644
--- a/Mailman/Handlers/Moderate.py
+++ b/Mailman/Handlers/Moderate.py
@@ -21,6 +21,7 @@
 import re
 from email.MIMEMessage import MIMEMessage
 from email.MIMEText import MIMEText
+from email.Utils import parseaddr
 
 from Mailman import mm_cfg
 from Mailman import Utils
@@ -47,9 +48,34 @@ class ModeratedMemberPost(Hold.ModeratedPost):
 
 
 def process(mlist, msg, msgdata):
-    if msgdata.get('approved') or msgdata.get('fromusenet'):
+    if msgdata.get('approved'):
         return
-    # First of all, is the poster a member or not?
+    # Before anything else, check DMARC if necessary.
+    msgdata['from_is_list'] = 0
+    dn, addr = parseaddr(msg.get('from'))
+    if addr and mlist.dmarc_moderation_action > 0:
+        if Utils.IsDMARCProhibited(mlist, addr):
+            # Note that for dmarc_moderation_action, 0 = Accept, 
+            #    1 = Munge, 2 = Wrap, 3 = Reject, 4 = Discard
+            if mlist.dmarc_moderation_action == 1:
+                msgdata['from_is_list'] = 1
+            elif mlist.dmarc_moderation_action == 2:
+                msgdata['from_is_list'] = 2
+            elif mlist.dmarc_moderation_action == 3:
+                # Reject
+                text = mlist.dmarc_moderation_notice
+                if text:
+                    text = Utils.wrap(text)
+                else:
+                    text = Utils.wrap(_(
+"""You are not allowed to post to this mailing list From: a domain which
+publishes a DMARC policy of reject or quarantine, and your message has been
+automatically rejected.  If you think that your messages are being rejected in
+error, contact the mailing list owner at %(listowner)s."""))
+                raise Errors.RejectMessage, text
+            elif mlist.dmarc_moderation_action == 4:
+                raise Errors.DiscardMessage
+    # Then, is the poster a member or not?
     for sender in msg.get_senders():
         if mlist.isMember(sender):
             break
@@ -105,7 +131,7 @@ def process(mlist, msg, msgdata):
     # moderation configuration variables.  Handle by way of generic non-member
     # action.
     assert 0 <= mlist.generic_nonmember_action <= 4
-    if mlist.generic_nonmember_action == 0:
+    if mlist.generic_nonmember_action == 0 or msgdata.get('fromusenet'):
         # Accept
         return
     elif mlist.generic_nonmember_action == 1:
diff --git a/Mailman/Handlers/Tagger.py b/Mailman/Handlers/Tagger.py
index 0d3ce49..2117290 100644
--- a/Mailman/Handlers/Tagger.py
+++ b/Mailman/Handlers/Tagger.py
@@ -24,6 +24,7 @@ import email.Iterators
 
 from Mailman import Utils
 from Mailman.Logging.Syslog import syslog
+from Mailman.Handlers.CookHeaders import change_header
 
 CRNL = '\r\n'
 EMPTYSTRING = ''
@@ -60,8 +61,9 @@ def process(mlist, msg, msgdata):
                 break
     if hits:
         msgdata['topichits'] = hits.keys()
-        msg['X-Topics'] = NLTAB.join(hits.keys())
-    
+        change_header('X-Topics', NLTAB.join(hits.keys()),
+                      mlist, msg, msgdata, delete=False)
+
 
 
 def scanbody(msg, numlines=None):
diff --git a/Mailman/Handlers/WrapMessage.py b/Mailman/Handlers/WrapMessage.py
new file mode 100644
index 0000000..9678f6f
--- /dev/null
+++ b/Mailman/Handlers/WrapMessage.py
@@ -0,0 +1,72 @@
+# Copyright (C) 2013-2014 by the Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+# USA.
+
+"""Wrap the message in an outer message/rfc822 part and transfer/add
+some headers from the original.
+
+Also, in the case of Munge From, replace the From: and Reply-To: in the
+original message.
+"""
+
+import copy
+
+from Mailman import mm_cfg
+from Mailman.Utils import unique_message_id
+from Mailman.Message import Message
+
+# Headers from the original that we want to keep in the wrapper.
+KEEPERS = ('to',
+           'in-reply-to',
+           'references',
+           'x-mailman-approved-at',
+          )
+
+
+
+def process(mlist, msg, msgdata):
+    # This is the negation of we're wrapping because dmarc_moderation_action
+    # is wrap this message or from_is_list applies and is wrap.
+    if not (msgdata.get('from_is_list') == 2 or
+            (mlist.from_is_list == 2 and msgdata.get('from_is_list') == 0)):
+        # Now see if we need to add a From: and/or Reply-To: without wrapping.
+        a_h = msgdata.get('add_header')
+        if a_h:
+            if a_h.get('From'):
+                del msg['from']
+                msg['From'] = a_h.get('From')
+            if a_h.get('Reply-To'):
+                del msg['reply-to']
+                msg['Reply-To'] = a_h.get('Reply-To')
+        return
+
+    # There are various headers in msg that we don't want, so we basically
+    # make a copy of the msg, then delete almost everything and set/copy
+    # what we want.
+    omsg = copy.deepcopy(msg)
+    for key in msg.keys():
+        if key.lower() not in KEEPERS:
+            del msg[key]
+    msg['MIME-Version'] = '1.0'
+    msg['Content-Type'] = 'message/rfc822'
+    msg['Content-Disposition'] = 'inline'
+    msg['Message-ID'] = unique_message_id(mlist)
+    # Add the headers from CookHeaders.
+    for k, v in msgdata['add_header'].items():
+        msg[k] = v
+    # And set the payload.
+    msg.set_payload(omsg.as_string())
+
diff --git a/Mailman/MailList.py b/Mailman/MailList.py
old mode 100644
new mode 100755
index 6083fb1..f948b69
--- a/Mailman/MailList.py
+++ b/Mailman/MailList.py
@@ -346,6 +346,7 @@ class MailList(HTMLFormatter, Deliverer, ListAdmin,
         self.bounce_matching_headers = \
                 mm_cfg.DEFAULT_BOUNCE_MATCHING_HEADERS
         self.header_filter_rules = []
+        self.from_is_list = mm_cfg.DEFAULT_FROM_IS_LIST
         self.anonymous_list = mm_cfg.DEFAULT_ANONYMOUS_LIST
         internalname = self.internal_name()
         self.real_name = internalname[0].upper() + internalname[1:]
@@ -386,6 +387,10 @@ class MailList(HTMLFormatter, Deliverer, ListAdmin,
         # 2==Discard
         self.member_moderation_action = 0
         self.member_moderation_notice = ''
+        self.dmarc_moderation_action = mm_cfg.DEFAULT_DMARC_MODERATION_ACTION
+        self.dmarc_quarantine_moderation_action = (
+            mm_cfg.DEFAULT_DMARC_QUARANTINE_MODERATION_ACTION)
+        self.dmarc_moderation_notice = ''
         self.accept_these_nonmembers = []
         self.hold_these_nonmembers = []
         self.reject_these_nonmembers = []
@@ -712,7 +717,14 @@ class MailList(HTMLFormatter, Deliverer, ListAdmin,
     def CheckVersion(self, stored_state):
         """Auto-update schema if necessary."""
         if self.data_version >= mm_cfg.DATA_FILE_VERSION:
-            return
+            # Some lists could have been created by newer Mailman version than
+            # this one. We are adding just few variables, so check for these
+            # variables explicitely.
+            if (hasattr(self, "from_is_list")
+                and hasattr(self, "dmarc_moderation_action")
+                and hasattr(self, "dmarc_moderation_notice")
+                and hasattr(self, "dmarc_quarantine_moderation_action")):
+                return
         # Initialize any new variables
         self.InitVars()
         # Then reload the database (but don't recurse).  Force a reload even
@@ -1025,7 +1030,8 @@ class MailList(HTMLFormatter, Deliverer, ListAdmin,
         # And send an acknowledgement to the user...
         if userack:
             self.SendUnsubscribeAck(emailaddr, userlang)
-        # ...and to the administrator
+        # ...and to the administrator in the correct language.  (LP: #1308655)
+        i18n.set_language(self.preferred_language)
         if admin_notif:
             realname = self.real_name
             subject = _('%(realname)s unsubscribe notification')
diff --git a/Mailman/Message.py b/Mailman/Message.py
index 84e4aa2..13e7ff2 100644
--- a/Mailman/Message.py
+++ b/Mailman/Message.py
@@ -61,6 +61,43 @@ class Generator(email.Generator.Generator):
 
 
 
+class Generator(email.Generator.Generator):
+    """Generates output from a Message object tree, keeping signatures.
+
+       Headers will by default _not_ be folded in attachments.
+    """
+    def __init__(self, outfp, mangle_from_=True,
+                 maxheaderlen=78, children_maxheaderlen=0):
+        email.Generator.Generator.__init__(self, outfp,
+                mangle_from_=mangle_from_, maxheaderlen=maxheaderlen)
+        self.__children_maxheaderlen = children_maxheaderlen
+
+    def clone(self, fp):
+        """Clone this generator with maxheaderlen set for children"""
+        return self.__class__(fp, self._mangle_from_,
+                self.__children_maxheaderlen, self.__children_maxheaderlen)
+
+    # This is the _handle_message method with the fix for bug 7970.
+    def _handle_message(self, msg):
+        s = StringIO()
+        g = self.clone(s)
+        # The payload of a message/rfc822 part should be a multipart sequence
+        # of length 1.  The zeroth element of the list should be the Message
+        # object for the subpart.  Extract that object, stringify it, and
+        # write it out.
+        # Except, it turns out, when it's a string instead, which happens when
+        # and only when HeaderParser is used on a message of mime type
+        # message/rfc822.  Such messages are generated by, for example,
+        # Groupwise when forwarding unadorned messages.  (Issue 7970.)  So
+        # in that case we just emit the string body.
+        payload = msg.get_payload()
+        if isinstance(payload, list):
+            g.flatten(msg.get_payload(0), unixfrom=False)
+            payload = s.getvalue()
+        self._fp.write(payload)
+
+
+
 class Message(email.Message.Message):
     def __init__(self):
         # We need a version number so that we can optimize __setstate__()
@@ -243,6 +280,20 @@ class Message(email.Message.Message):
         return fp.getvalue()
 
 
+    def as_string(self, unixfrom=False, mangle_from_=True):
+        """Return entire formatted message as a string using
+        Mailman.Message.Generator.
+
+        Operates like email.Message.Message.as_string, only
+	using Mailman's Message.Generator class. Only the top headers will
+        get folded.
+        """
+        fp = StringIO()
+        g = Generator(fp, mangle_from_=mangle_from_)
+        g.flatten(self, unixfrom=unixfrom)
+        return fp.getvalue()
+
+
 
 class UserNotification(Message):
     """Class for internally crafted messages."""
diff --git a/Mailman/Utils.py b/Mailman/Utils.py
index c8275df..8021942 100644
--- a/Mailman/Utils.py
+++ b/Mailman/Utils.py
@@ -71,6 +71,14 @@ except NameError:
     True = 1
     False = 0
 
+try:
+    import dns.resolver
+    import dns.rdatatype
+    from dns.exception import DNSException
+    dns_resolver = True
+except ImportError:
+    dns_resolver = False
+
 EMPTYSTRING = ''
 UEMPTYSTRING = u''
 NL = '\n'
@@ -1047,3 +1055,91 @@ def suspiciousHTML(html):
     else:
         return False
 
+
+
+
+# This takes an email address, and returns True if DMARC policy is p=reject
+# or possibly quarantine.
+def IsDMARCProhibited(mlist, email):
+    if not dns_resolver:
+         return False
+
+    email = email.lower()
+    at_sign = email.find('@')
+    if at_sign < 1:
+        return False
+    dmarc_domain = '_dmarc.' + email[at_sign+1:]
+
+    try:
+        resolver = dns.resolver.Resolver()
+        resolver.timeout = float(mm_cfg.DMARC_RESOLVER_TIMEOUT)
+        resolver.lifetime = float(mm_cfg.DMARC_RESOLVER_LIFETIME)
+        txt_recs = resolver.query(dmarc_domain, dns.rdatatype.TXT)
+    except (dns.resolver.NXDOMAIN, dns.resolver.NoAnswer):
+        return False
+    except DNSException, e:
+        syslog('error',
+               'DNSException: Unable to query DMARC policy for %s (%s). %s',
+              email, dmarc_domain, e.__class__)
+        return False
+    else:
+# people are already being dumb, don't trust them to provide honest DNS
+# where the answer section only contains what was asked for, nor to include
+# CNAMEs before the values they point to.
+        full_record = ""
+        results_by_name = {}
+        cnames = {}
+        want_names = set([dmarc_domain + '.'])
+        for txt_rec in txt_recs.response.answer:
+            if txt_rec.rdtype == dns.rdatatype.CNAME:
+                cnames[txt_rec.name.to_text()] = (
+                    txt_rec.items[0].target.to_text())
+            if txt_rec.rdtype != dns.rdatatype.TXT:
+                continue
+            results_by_name.setdefault(txt_rec.name.to_text(), []).append(
+                "".join(txt_rec.items[0].strings))
+        expands = list(want_names)
+        seen = set(expands)
+        while expands:
+            item = expands.pop(0)
+            if item in cnames:
+                if cnames[item] in seen:
+                    continue # cname loop
+                expands.append(cnames[item])
+                seen.add(cnames[item])
+                want_names.add(cnames[item])
+                want_names.discard(item)
+
+        if len(want_names) != 1:
+            syslog('error',
+                   """multiple DMARC entries in results for %s,
+                   processing each to be strict""",
+                   dmarc_domain)
+        for name in want_names:
+            if name not in results_by_name:
+                continue
+            dmarcs = filter(lambda n: n.startswith('v=DMARC1;'),
+                            results_by_name[name])
+            if len(dmarcs) == 0:
+                return False
+            if len(dmarcs) > 1:
+                syslog('error',
+                       """RRset of TXT records for %s has %d v=DMARC1 entries;
+                       testing them all""",
+                        dmarc_domain, len(dmarc))
+            for entry in dmarcs:
+                if re.search(r'\bp=reject\b', entry, re.IGNORECASE):
+                    syslog('vette',
+                        'DMARC lookup for %s (%s) found p=reject in %s = %s',
+                        email, dmarc_domain, name, entry)
+                    return True
+
+                if (mlist.dmarc_quarantine_moderation_action and
+                    re.search(r'\bp=quarantine\b', entry, re.IGNORECASE)):
+                    syslog('vette',
+                      'DMARC lookup for %s (%s) found p=quarantine in %s = %s',
+                            email, dmarc_domain, name, entry)
+                    return True
+
+    return False
+
diff --git a/Mailman/Version.py b/Mailman/Version.py
index 05e6500..af4a2df 100644
--- a/Mailman/Version.py
+++ b/Mailman/Version.py
@@ -37,7 +37,7 @@ HEX_VERSION = ((MAJOR_REV << 24) | (MINOR_REV << 16) | (MICRO_REV << 8) |
                (REL_LEVEL << 4)  | (REL_SERIAL << 0))
 
 # config.pck schema version number
-DATA_FILE_VERSION = 100
+DATA_FILE_VERSION = 101
 
 # qfile/*.db schema version number
 QFILE_SCHEMA_VERSION = 3
diff --git a/Mailman/versions.py b/Mailman/versions.py
old mode 100644
new mode 100755
index 81fafd5..138e770
--- a/Mailman/versions.py
+++ b/Mailman/versions.py
@@ -313,6 +313,9 @@ def UpdateOldVars(l, stored_state):
             pass
         else:
             l.digest_members[k] = 0
+    # from_is_list was called author_is_list in 2.1.16rc2 (only).
+    PreferStored('author_is_list', 'from_is_list',
+                 mm_cfg.DEFAULT_FROM_IS_LIST)
 
 
 
@@ -383,6 +386,11 @@ def NewVars(l):
     # the current GUI description model.  So, 0==Hold, 1==Reject, 2==Discard
     add_only_if_missing('member_moderation_action', 0)
     add_only_if_missing('member_moderation_notice', '')
+    add_only_if_missing('dmarc_moderation_action', 
+                       mm_cfg.DEFAULT_DMARC_MODERATION_ACTION)
+    add_only_if_missing('dmarc_quarantine_moderation_action',
+                       mm_cfg.DEFAULT_DMARC_QUARANTINE_MODERATION_ACTION)
+    add_only_if_missing('dmarc_moderation_notice', '')
     add_only_if_missing('new_member_options',
                         mm_cfg.DEFAULT_NEW_MEMBER_OPTIONS)
     # Emergency moderation flag
diff --git a/contrib/majordomo2mailman.pl b/contrib/majordomo2mailman.pl
index c874862..770dc57 100644
--- a/contrib/majordomo2mailman.pl
+++ b/contrib/majordomo2mailman.pl
@@ -480,6 +480,7 @@ sub init_defaultmmconf {
 		  'max_num_recipients', "10",
 		  'forbidden_posters', "[]",
 		  'bounce_matching_headers',  "\"\"\"\n\"\"\"\n",
+		  'from_is_list', "0",
 		  'anonymous_list', "0",
 		  'nondigestable', "1",
 		  'digestable', "1",