From 25dbe3dd825a629ff7f67cb43342cc345071d3f7 Mon Sep 17 00:00:00 2001
From: David Teigland <teigland@redhat.com>
Date: Wed, 24 Nov 2021 16:03:39 -0600
Subject: [PATCH 15/54] man: lvmautoactivation
new topical man page describing autoactivation
---
man/Makefile.in | 2 +-
man/lvm.8_main | 1 +
man/lvmautoactivation.7_main | 280 +++++++++++++++++++++++++++++++++++
man/pvscan.8_des | 63 ++++----
4 files changed, 309 insertions(+), 37 deletions(-)
create mode 100644 man/lvmautoactivation.7_main
diff --git a/man/Makefile.in b/man/Makefile.in
index 40248d640..ba6f2046f 100644
--- a/man/Makefile.in
+++ b/man/Makefile.in
@@ -33,7 +33,7 @@ CMIRRORDMAN = cmirrord.8
LVMDBUSDMAN = lvmdbusd.8
MAN5=lvm.conf.5
-MAN7=lvmsystemid.7 lvmreport.7 lvmraid.7
+MAN7=lvmsystemid.7 lvmreport.7 lvmraid.7 lvmautoactivation.7
MAN8=lvm.8 lvmdump.8 lvm-fullreport.8 lvm-lvpoll.8 \
lvcreate.8 lvchange.8 lvmconfig.8 lvconvert.8 lvdisplay.8 \
diff --git a/man/lvm.8_main b/man/lvm.8_main
index 6f86d0353..a008a3bc0 100644
--- a/man/lvm.8_main
+++ b/man/lvm.8_main
@@ -579,6 +579,7 @@ Prepends source file name and code line number with libdm debugging.
.BR lvmraid (7),
.BR lvmthin (7),
.BR lvmcache (7),
+.BR lvmautoactivation (7),
.P
.BR dmsetup (8),
.BR dmstats (8),
diff --git a/man/lvmautoactivation.7_main b/man/lvmautoactivation.7_main
new file mode 100644
index 000000000..87c15a3d1
--- /dev/null
+++ b/man/lvmautoactivation.7_main
@@ -0,0 +1,280 @@
+.TH "LVMAUTOACTIVATION" "7" "LVM TOOLS #VERSION#" "Red Hat, Inc" "\""
+.
+.SH NAME
+.
+lvmautoactivation \(em LVM autoactivation
+.
+.SH DESCRIPTION
+.
+Autoactivation is the activation of LVs performed automatically by the
+system in response to LVM devices being attached to the machine. When all
+PVs in a VG have been attached, the VG is complete, and LVs in the VG are
+activated.
+.P
+Autoactivation of VGs, or specific LVs, can be prevented using vgchange or
+lvchange --setautoactivation n. The lvm.conf auto_activation_volume_list
+is another way to limit autoactivation.
+.P
+The most common form of autoactivation is "event based", in which complete
+VGs are activated in response to uevents which occur during system startup
+or at any time after the system has started. Another form of
+autoactivation is "service based" in which complete VGs are activated at a
+fixed point during system startup by a systemd service, and are not
+activated in response to uevents. This can be controlled with the
+lvm.conf setting event_activation.
+.P
+Event based autoactivation is driven by udev, udev rules, and systemd.
+When a device is attached to a machine, a uevent is generated by the
+kernel to notify userspace of the new device. systemd-udev runs udev
+rules to process the new device. Udev rules use blkid to identify the
+device as an LVM PV and then execute the lvm-specific udev rule for the
+device, which triggers autoactivation.
+.P
+There are two variations of event based autoactivation that may be used a
+system, depending on the LVM udev rule that is installed (found in
+/lib/udev/rules.d/.) The following summarizes the steps in each rule
+which lead to autoactivation:
+.P
+.B 69-dm-lvm-metad.rules
+.
+.IP \[bu] 2
+device /dev/name with major:minor X:Y is attached to the machine
+.
+.IP \[bu] 2
+systemd/udev runs blkid to identify /dev/name as an LVM PV
+.
+.IP \[bu] 2
+udev rule 69-dm-lvm-metad.rules is run for /dev/name
+.
+.IP \[bu] 2
+the lvm udev rule runs the systemd service lvm2-pvscan@X:Yservice
+.
+.IP \[bu] 2
+the lvm2-pvscan service runs:
+.br
+pvscan --cache -aay --major X --minor Y
+.
+.IP \[bu] 2
+pvscan reads the device, records that the PV is online
+(see pvs_online), and checks if the VG is complete.
+.
+.IP \[bu] 2
+if the VG is complete, pvscan creates the vgs_online temp file,
+and activates the VG.
+.
+.IP \[bu] 2
+the activation command output can be seen from
+systemctl status lvm2-pvscan*
+.P
+.B 69-dm-lvm.rules
+.
+.IP \[bu] 2
+device /dev/name with major:minor X:Y is attached to the machine
+.
+.IP \[bu] 2
+systemd/udev runs blkid to identify /dev/name as an LVM PV
+.
+.IP \[bu] 2
+udev rule 69-dm-lvm.rules is run for /dev/name
+.
+.IP \[bu] 2
+the lvm udev rule runs:
+.br
+pvscan --cache --listvg --checkcomplete --vgonline
+.br
+--autoactivation event --udevoutput --journal=output /dev/name
+.
+.IP \[bu] 2
+pvscan reads the device, records that the PV is online
+(see pvs_online), and checks if the VG is complete.
+.
+.IP \[bu] 2
+if the VG is complete, pvscan creates the vgs_online temp file,
+and prints the name of the VG for the udev rule to import:
+LVM_VG_NAME_COMPLETE='vgname'
+.
+.IP \[bu] 2
+if the lvm udev rule sees LVM_VG_NAME_COMPLETE from pvscan,
+it activates the VG using a transient systemd service named
+lvm-activate-<vgname>.
+.
+.IP \[bu] 2
+the lvm-activate-<vgname> service runs
+.br
+vgchange -aay --autoactivation event <vgname>
+.
+.IP \[bu] 2
+the activation command output can be seen from
+systemctl status lvm-activate-<vgname>
+.P
+.
+.SS pvscan options
+.P
+.B --cache
+.br
+Read the <device> arg (and only that device), and record that
+the PV is online by creating the /run/lvm/pvs_online/<pvid>
+file containing the name of the VG and the device for the PV.
+.P
+.B -aay
+.br
+Activate the VG from the pvscan command
+(includes implicit --checkcomplete and --vgonline.)
+.P
+.B --checkcomplete
+.br
+Check if the VG is complete, i.e. all PVs are present on
+the system, by checking /run/lvm/pvs_online/<pvid> files.
+.P
+.B --vgonline
+.br
+Create /run/lvm/vgs_online/<vgname> if the VG is complete
+(used to ensure only one command performs activation.)
+.P
+.B --autoactivation event
+.br
+Inform the command it is used for event based autoactivation.
+.P
+.B --listvg
+.br
+Print the name of the VG using the device.
+.P
+.B --udevoutput
+.br
+Only print output that can be imported to the udev rule,
+using the udev environment key format, i.e. NAME='value'.
+.P
+.B --journal=output
+.br
+Send standard command output to the journal (when stdout
+is reserved for udev output.)
+.P
+.SS Temp files
+.P
+Autoactivation commands use a number of temp files in /run/lvm (with the
+expectation that /run is cleared between boots.)
+.P
+.B pvs_online
+.br
+pvscan --cache creates a file here for each PV that is attached. The file
+is named with the PVID and contains the VG name and device information.
+The existence of the file is used to determine when all PVs for a given VG
+are present. The device information in these files is also used to
+optimize locating devices for a VG when the VG is activated.
+.P
+.B pvs_lookup
+.br
+pvscan --cache creates a file here named for a VG (if one doesn't already
+exist.) The file contains a list of PVIDs in the VG. This is needed when
+a PV is processed which has no VG metadata, in which case the list of
+PVIDs from the lookup file is used to check if the VG is complete.
+.P
+.B vgs_online
+.br
+The first activation command (pvscan or vgchange) to create a file here,
+named for the VG, will activate the VG. This resolves a race when
+concurrent commands attempt to activate a VG at once.
+.
+.SH EXAMPLES
+.P
+VG "vg" contains two PVs:
+.nf
+$ pvs -o name,vgname,uuid /dev/sdb /dev/sdc
+ PV VG PV UUID
+ /dev/sdb vg 1uKpaT-lFOZ-NLHX-j4jI-OBi1-QpdE-HZ5hZY
+ /dev/sdc vg 5J3tM8-aIPe-2vbd-DBe7-bvRq-TGj0-DaKV2G
+.fi
+.P
+use of --cache:
+.nf
+$ pvscan --cache /dev/sdb
+ pvscan[12922] PV /dev/sdb online.
+$ pvscan --cache /dev/sdc
+ pvscan[12923] PV /dev/sdc online.
+
+$ cat /run/lvm/pvs_online/1uKpaTlFOZNLHXj4jIOBi1QpdEHZ5hZY
+8:16
+vg:vg
+dev:/dev/sdb
+$ cat /run/lvm/pvs_online/5J3tM8aIPe2vbdDBe7bvRqTGj0DaKV2G
+8:32
+vg:vg
+dev:/dev/sdc
+.fi
+.P
+use of -aay:
+.nf
+$ pvscan --cache -aay /dev/sdb
+ pvscan[12935] PV /dev/sdb online, VG vg incomplete (need 1).
+$ pvscan --cache -aay /dev/sdc
+ pvscan[12936] PV /dev/sdc online, VG vg is complete.
+ pvscan[12936] VG vg run autoactivation.
+ 1 logical volume(s) in volume group "vg" now active
+
+$ cat /run/lvm/pvs_online/1uKpaTlFOZNLHXj4jIOBi1QpdEHZ5hZY
+8:16
+vg:vg
+dev:/dev/sdb
+$ cat /run/lvm/pvs_online/5J3tM8aIPe2vbdDBe7bvRqTGj0DaKV2G
+8:32
+vg:vg
+dev:/dev/sdc
+$ ls /run/lvm/vgs_online/vg
+/run/lvm/vgs_online/vg
+.fi
+.P
+use of --listvg:
+.nf
+$ pvscan --cache --listvg /dev/sdb
+ VG vg
+$ pvscan --cache --listvg /dev/sdc
+ VG vg
+
+$ cat /run/lvm/pvs_online/1uKpaTlFOZNLHXj4jIOBi1QpdEHZ5hZY
+8:16
+vg:vg
+dev:/dev/sdb
+$ cat /run/lvm/pvs_online/5J3tM8aIPe2vbdDBe7bvRqTGj0DaKV2G
+8:32
+vg:vg
+dev:/dev/sdc
+.fi
+.P
+use of --checkcomplete:
+.nf
+$ pvscan --cache --listvg --checkcomplete --vgonline /dev/sdb
+ pvscan[12996] PV /dev/sdb online, VG vg incomplete (need 1).
+ VG vg incomplete
+$ pvscan --cache --listvg --checkcomplete --vgonline /dev/sdc
+ pvscan[12997] PV /dev/sdc online, VG vg is complete.
+ VG vg complete
+.fi
+.P
+use of --udevoutput:
+.nf
+$ pvscan --cache --listvg --checkcomplete --vgonline --udevoutput /dev/sdb
+LVM_VG_NAME_INCOMPLETE='vg'
+$ pvscan --cache --listvg --checkcomplete --vgonline --udevoutput /dev/sdc
+LVM_VG_NAME_COMPLETE='vg'
+.fi
+.P
+use of --listlvs:
+.nf
+$ lvs -o name,devices vg
+ LV Devices
+ lvol0 /dev/sdb(0)
+ lvol1 /dev/sdc(0)
+ lvol2 /dev/sdb(1),/dev/sdc(1)
+
+$ pvscan --cache --listlvs --checkcomplete /dev/sdb
+ pvscan[13288] PV /dev/sdb online, VG vg incomplete (need 1).
+ VG vg incomplete
+ LV vg/lvol0 complete
+ LV vg/lvol2 incomplete
+$ pvscan --cache --listlvs --checkcomplete /dev/sdc
+ pvscan[13289] PV /dev/sdc online, VG vg is complete.
+ VG vg complete
+ LV vg/lvol1 complete
+ LV vg/lvol2 complete
+.fi
+
diff --git a/man/pvscan.8_des b/man/pvscan.8_des
index b20b987da..4c5929955 100644
--- a/man/pvscan.8_des
+++ b/man/pvscan.8_des
@@ -4,56 +4,47 @@ like
or
.BR pvdisplay (8).
.P
-When the --cache and -aay options are used, pvscan records which PVs are
-available on the system, and activates LVs in completed VGs. A VG is
-complete when pvscan sees that the final PV in the VG has appeared. This
-is used by event-based system startup (systemd, udev) to activate LVs.
-.P
-The four main variations of this are:
+When --cache is used, pvscan updates runtime lvm state on the system, or
+with -aay performs autoactivation.
.P
.B pvscan --cache
.I device
.P
-If device is present, lvm adds a record that the PV on device is online.
+If device is present, lvm records that the PV on device is online.
If device is not present, lvm removes the online record for the PV.
-In most cases, the pvscan will only read the named devices.
+pvscan only reads the named device.
.P
-.B pvscan --cache -aay
-.IR device ...
+.B pvscan --cache
.P
-This begins by performing the same steps as above. Afterward, if the VG
-for the specified PV is complete, then pvscan will activate LVs in the VG
-(the same as vgchange -aay vgname would do.)
+Updates the runtime state for all lvm devices.
.P
-.B pvscan --cache
+.B pvscan --cache -aay
+.I device
.P
-This first clears all existing PV online records, then scans all devices
-on the system, adding PV online records for any PVs that are found.
+Performs the --cache steps for the device, then checks if the VG using the
+device is complete. If so, LVs in the VG are autoactivated, the same as
+vgchange -aay vgname would do. (A device name may be replaced with major
+and minor numbers.)
.P
.B pvscan --cache -aay
.P
-This begins by performing the same steps as pvscan --cache. Afterward, it
-activates LVs in any complete VGs.
+Performs the --cache steps for all devices, then autoactivates any complete VGs.
.P
-To prevent devices from being scanned by pvscan --cache, add them
-to
-.BR lvm.conf (5)
-.B devices/global_filter.
-For more information, see:
-.br
-.B lvmconfig --withcomments devices/global_filter
+.B pvscan --cache --listvg|--listlvs
+.I device
+.P
+Performs the --cache steps for the device, then prints the name of the VG
+using the device, or the names of LVs using the device. --checkcomplete
+is usually included to check if all PVs for the VG or LVs are online.
+When this command is called by a udev rule, the output must conform to
+udev rule specifications (see --udevoutput.) The udev rule will use the
+results to perform autoactivation.
.P
-Auto-activation of VGs or LVs can be enabled/disabled using:
-.br
+Autoactivation of VGs or LVs can be enabled/disabled using vgchange or
+lvchange with --setautoactivation y|n, or by adding names to
.BR lvm.conf (5)
.B activation/auto_activation_volume_list
.P
-For more information, see:
-.br
-.B lvmconfig --withcomments activation/auto_activation_volume_list
-.P
-To disable auto-activation, explicitly set this list to an empty list,
-i.e. auto_activation_volume_list = [ ].
-.P
-When this setting is undefined (e.g. commented), then all LVs are
-auto-activated.
+See
+.BR lvmautoactivation (7)
+for more information about how pvscan is used for autoactivation.
--
2.34.3