WHATS_NEW | 1 -
daemons/dmeventd/plugins/raid/dmeventd_raid.c | 42 +++--------
lib/metadata/lv.c | 7 ++
lib/metadata/raid_manip.c | 2 +-
test/shell/lvconvert-repair-raid.sh | 104 ++------------------------
tools/lvconvert.c | 19 +++++
6 files changed, 41 insertions(+), 134 deletions(-)
diff --git a/WHATS_NEW b/WHATS_NEW
index 25f6742..977e578 100644
--- a/WHATS_NEW
+++ b/WHATS_NEW
@@ -3,7 +3,6 @@ Version 2.02.166 - 26th September 2016
Fix lvm2-activation-generator to read all LVM2 config sources. (2.02.155)
Fix lvchange-rebuild-raid.sh to cope with older target versions.
Use dm_config_parse_without_dup_node_check() to speedup metadata reading.
- Fix lvconvert --repair regression
Fix reported origin lv field for cache volumes. (2.02.133)
Always specify snapshot cow LV for monitoring not internal LV. (2.02.165)
Fix lvchange --discard|--zero for active thin-pool.
diff --git a/daemons/dmeventd/plugins/raid/dmeventd_raid.c b/daemons/dmeventd/plugins/raid/dmeventd_raid.c
index bec594a..770fbc6 100644
--- a/daemons/dmeventd/plugins/raid/dmeventd_raid.c
+++ b/daemons/dmeventd/plugins/raid/dmeventd_raid.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2005-2016 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2005-2015 Red Hat, Inc. All rights reserved.
*
* This file is part of LVM2.
*
@@ -13,20 +13,14 @@
*/
#include "lib.h"
-#include "defaults.h"
#include "dmeventd_lvm.h"
#include "libdevmapper-event.h"
-/* Hold enough elements for the mximum number of RAID images */
-#define RAID_DEVS_ELEMS ((DEFAULT_RAID_MAX_IMAGES + 63) / 64)
-
struct dso_state {
struct dm_pool *mem;
char cmd_lvscan[512];
char cmd_lvconvert[512];
- uint64_t raid_devs[RAID_DEVS_ELEMS];
int failed;
- int warned;
};
DM_EVENT_LOG_FN("raid")
@@ -37,39 +31,20 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
{
struct dm_status_raid *status;
const char *d;
- int dead = 0, r = 1;
if (!dm_get_status_raid(state->mem, params, &status)) {
log_error("Failed to process status line for %s.", device);
return 0;
}
- d = status->dev_health;
- while ((d = strchr(d, 'D'))) {
- uint32_t dev = (uint32_t)(d - status->dev_health);
-
- if (!(state->raid_devs[dev / 64] & (1 << (dev % 64))))
- log_error("Device #%u of %s array, %s, has failed.",
- dev, status->raid_type, device);
-
- state->raid_devs[dev / 64] |= (1 << (dev % 64));
- d++;
- dead = 1;
- }
-
- if (dead) {
- if (status->insync_regions < status->total_regions) {
- if (!state->warned)
- log_warn("WARNING: waiting for resynchronization to finish "
- "before initiating repair on RAID device %s", device);
-
- state->warned = 1;
- goto out; /* Not yet done syncing with accessible devices */
- }
-
+ if ((d = strchr(status->dev_health, 'D'))) {
if (state->failed)
goto out; /* already reported */
+ log_error("Device #%d of %s array, %s, has failed.",
+ (int)(d - status->dev_health),
+ status->raid_type, device);
+
state->failed = 1;
if (!dmeventd_lvm2_run_with_lock(state->cmd_lvscan))
log_warn("WARNING: Re-scan of RAID device %s failed.", device);
@@ -77,7 +52,8 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
/* if repair goes OK, report success even if lvscan has failed */
if (!dmeventd_lvm2_run_with_lock(state->cmd_lvconvert)) {
log_info("Repair of RAID device %s failed.", device);
- r = 0;
+ dm_pool_free(state->mem, status);
+ return 0;
}
} else {
state->failed = 0;
@@ -88,7 +64,7 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
out:
dm_pool_free(state->mem, status);
- return r;
+ return 1;
}
void process_event(struct dm_task *dmt,
diff --git a/lib/metadata/lv.c b/lib/metadata/lv.c
index 70036f9..53a1044 100644
--- a/lib/metadata/lv.c
+++ b/lib/metadata/lv.c
@@ -988,6 +988,7 @@ int lv_mirror_image_in_sync(const struct logical_volume *lv)
int lv_raid_image_in_sync(const struct logical_volume *lv)
{
unsigned s;
+ dm_percent_t percent;
char *raid_health;
struct lv_segment *seg, *raid_seg = NULL;
@@ -1017,6 +1018,12 @@ int lv_raid_image_in_sync(const struct logical_volume *lv)
return 0;
}
+ if (!lv_raid_percent(raid_seg->lv, &percent))
+ return_0;
+
+ if (percent == DM_PERCENT_100)
+ return 1;
+
/* Find out which sub-LV this is. */
for (s = 0; s < raid_seg->area_count; s++)
if (seg_lv(raid_seg, s) == lv)
diff --git a/lib/metadata/raid_manip.c b/lib/metadata/raid_manip.c
index deb88a2..e5fdf4f 100644
--- a/lib/metadata/raid_manip.c
+++ b/lib/metadata/raid_manip.c
@@ -3658,7 +3658,7 @@ static int _lv_raid_rebuild_or_replace(struct logical_volume *lv,
return 0;
}
- if (!_raid_in_sync(lv)) {
+ if (!mirror_in_sync() && !_raid_in_sync(lv)) {
log_error("Unable to replace devices in %s/%s while it is"
" not in-sync.", lv->vg->name, lv->name);
return 0;
diff --git a/test/shell/lvconvert-repair-raid.sh b/test/shell/lvconvert-repair-raid.sh
index b51d8fe..1ef91c4 100644
--- a/test/shell/lvconvert-repair-raid.sh
+++ b/test/shell/lvconvert-repair-raid.sh
@@ -22,52 +22,11 @@ aux lvmconf 'allocation/maximise_cling = 0' \
aux prepare_vg 8
-function delay
-{
- for d in $(< DEVICES)
- do
- aux delay_dev "$d" 0 $1 $(get first_extent_sector "$d")
- done
-}
-
# It's possible small raid arrays do have problems with reporting in-sync.
# So try bigger size
-RAID_SIZE=32
-
-# Fast sync and repair afterwards
-delay 0
-
-# RAID1 dual-leg single replace after initial sync
-lvcreate --type raid1 -m 1 -L $RAID_SIZE -n $lv1 $vg "$dev1" "$dev2"
-aux wait_for_sync $vg $lv1
-aux disable_dev "$dev2"
-lvconvert -y --repair $vg/$lv1
-vgreduce --removemissing $vg
-aux enable_dev "$dev2"
-vgextend $vg "$dev2"
-lvremove -ff $vg/$lv1
-
-# Delayed sync to allow for repair during rebuild
-delay 50
-
-# RAID1 triple-leg single replace during initial sync
-lvcreate --type raid1 -m 2 -L $RAID_SIZE -n $lv1 $vg "$dev1" "$dev2" "$dev3"
-aux disable_dev "$dev2" "$dev3"
-not lvconvert -y --repair $vg/$lv1
-aux wait_for_sync $vg $lv1
-lvconvert -y --repair $vg/$lv1
-vgreduce --removemissing $vg
-aux enable_dev "$dev2" "$dev3"
-vgextend $vg "$dev2" "$dev3"
-lvremove -ff $vg/$lv1
-
-
-# Larger RAID size possible for striped RAID
RAID_SIZE=64
-# Fast sync and repair afterwards
-delay 0
-# RAID5 single replace after initial sync
+# RAID5 single replace
lvcreate --type raid5 -i 2 -L $RAID_SIZE -n $lv1 $vg "$dev1" "$dev2" "$dev3"
aux wait_for_sync $vg $lv1
aux disable_dev "$dev3"
@@ -75,69 +34,16 @@ lvconvert -y --repair $vg/$lv1
vgreduce --removemissing $vg
aux enable_dev "$dev3"
vgextend $vg "$dev3"
-lvremove -ff $vg/$lv1
+lvremove -ff $vg
-# Delayed sync to allow for repair during rebuild
-delay 50
-
-# RAID5 single replace during initial sync
-lvcreate --type raid5 -i 2 -L $RAID_SIZE -n $lv1 $vg "$dev1" "$dev2" "$dev3"
-aux disable_dev "$dev3"
-not lvconvert -y --repair $vg/$lv1
-aux wait_for_sync $vg $lv1
-lvconvert -y --repair $vg/$lv1
-vgreduce --removemissing $vg
-aux enable_dev "$dev3"
-vgextend $vg "$dev3"
-lvremove -ff $vg/$lv1
-
-# Fast sync and repair afterwards
-delay 0
-
-# RAID6 double replace after initial sync
+# RAID6 double replace
lvcreate --type raid6 -i 3 -L $RAID_SIZE -n $lv1 $vg \
"$dev1" "$dev2" "$dev3" "$dev4" "$dev5"
aux wait_for_sync $vg $lv1
aux disable_dev "$dev4" "$dev5"
lvconvert -y --repair $vg/$lv1
vgreduce --removemissing $vg
-aux enable_dev "$dev4" "$dev5"
-vgextend $vg "$dev4" "$dev5"
-lvremove -ff $vg/$lv1
-
-# Delayed sync to allow for repair during rebuild
-delay 50
-
-# RAID6 single replace after initial sync
-lvcreate --type raid6 -i 3 -L $RAID_SIZE -n $lv1 $vg \
- "$dev1" "$dev2" "$dev3" "$dev4" "$dev5"
-aux disable_dev "$dev4"
-not lvconvert -y --repair $vg/$lv1
-delay 0 # Fast sync and repair afterwards
-aux disable_dev "$dev4" # Need to disable again after changing delay
-aux wait_for_sync $vg $lv1
-lvconvert -y --repair $vg/$lv1
-vgreduce --removemissing $vg
aux enable_dev "$dev4"
-vgextend $vg "$dev4"
-lvremove -ff $vg/$lv1
-
-# Delayed sync to allow for repair during rebuild
-delay 50
-
-# RAID10 single replace after initial sync
-lvcreate --type raid10 -m 1 -i 2 -L $RAID_SIZE -n $lv1 $vg \
- "$dev1" "$dev2" "$dev3" "$dev4"
-aux disable_dev "$dev4"
-not lvconvert -y --repair $vg/$lv1
-delay 0 # Fast sync and repair afterwards
-aux disable_dev "$dev4" # Need to disable again after changing delay
-aux disable_dev "$dev1"
-aux wait_for_sync $vg $lv1
-lvconvert -y --repair $vg/$lv1
-vgreduce --removemissing $vg
-aux enable_dev "$dev4"
-vgextend $vg "$dev4"
-lvremove -ff $vg/$lv1
-
+aux enable_dev "$dev5"
+vgextend $vg "$dev4" "$dev5"
vgremove -ff $vg
diff --git a/tools/lvconvert.c b/tools/lvconvert.c
index 3607247..d1d21b6 100644
--- a/tools/lvconvert.c
+++ b/tools/lvconvert.c
@@ -1826,6 +1826,7 @@ static int _lvconvert_raid(struct logical_volume *lv, struct lvconvert_params *l
struct dm_list *failed_pvs;
struct cmd_context *cmd = lv->vg->cmd;
struct lv_segment *seg = first_seg(lv);
+ dm_percent_t sync_percent;
if (_linear_type_requested(lp->type_str)) {
if (arg_is_set(cmd, mirrors_ARG) && (arg_uint_value(cmd, mirrors_ARG, 0) != 0)) {
@@ -1973,6 +1974,24 @@ static int _lvconvert_raid(struct logical_volume *lv, struct lvconvert_params *l
return 0;
}
+ if (!lv_raid_percent(lv, &sync_percent)) {
+ log_error("Unable to determine sync status of %s.",
+ display_lvname(lv));
+ return 0;
+ }
+
+ if (sync_percent != DM_PERCENT_100) {
+ log_warn("WARNING: %s is not in-sync.", display_lvname(lv));
+ log_warn("WARNING: Portions of the array may be unrecoverable.");
+
+ /*
+ * The kernel will not allow a device to be replaced
+ * in an array that is not in-sync unless we override
+ * by forcing the array to be considered "in-sync".
+ */
+ init_mirror_in_sync(1);
+ }
+
_lvconvert_raid_repair_ask(cmd, lp, &replace);
if (replace) {