%global USE_FIPSCHECK true
%global USE_LIBCAP_NG true
%global USE_LABELED_IPSEC true
%global USE_CRL_FETCHING true
%global USE_DNSSEC true
%global USE_NM true
%global USE_LINUX_AUDIT true
%global _hardened_build 1
%global buildefence 0
%global development 0
#global prever rc1
Name: libreswan
Summary: IPsec implementation with IKEv1 and IKEv2 keying protocols
Version: 3.8
Release: %{?prever:0.}5%{?prever:.%{prever}}%{?dist}
License: GPLv2
Url: https://www.libreswan.org/
Source: https://download.libreswan.org/%{name}-%{version}%{?prever}.tar.gz
Group: System Environment/Daemons
BuildRequires: gmp-devel bison flex redhat-rpm-config pkgconfig
BuildRequires: systemd
Requires(post): coreutils bash systemd
Requires(preun): systemd
Requires(postun): systemd
Requires: iproute
Patch1: libreswan-3.8-docupdate.patch
Patch2: libreswan-3.8-no-acerts.patch
Patch3: libreswan-3.8-newhostkey-1058813.patch
Patch4: libreswan-3.8-log-1069024.patch
Patch5: libreswan-3.8-create_child_stub.patch
Conflicts: openswan < %{version}-%{release}
Obsoletes: openswan < %{version}-%{release}
Provides: openswan = %{version}-%{release}
Provides: openswan-doc = %{version}-%{release}
BuildRequires: pkgconfig hostname
BuildRequires: nss-devel >= 3.12.6-2, nspr-devel
BuildRequires: pam-devel
%if %{USE_DNSSEC}
BuildRequires: unbound-devel
%endif
%if %{USE_FIPSCHECK}
BuildRequires: fipscheck-devel
# we need fipshmac
Requires: fipscheck%{_isa}
%endif
%if %{USE_LINUX_AUDIT}
Buildrequires: audit-libs-devel
%endif
%if %{USE_LIBCAP_NG}
BuildRequires: libcap-ng-devel
%endif
%if %{USE_CRL_FETCHING}
BuildRequires: openldap-devel curl-devel
%endif
%if %{buildefence}
BuildRequires: ElectricFence
%endif
# Only needed if xml man pages are modified and need regeneration
# BuildRequires: xmlto
Requires: nss-tools, nss-softokn
%description
Libreswan is a free implementation of IPsec & IKE for Linux. IPsec is
the Internet Protocol Security and uses strong cryptography to provide
both authentication and encryption services. These services allow you
to build secure tunnels through untrusted networks. Everything passing
through the untrusted net is encrypted by the ipsec gateway machine and
decrypted by the gateway at the other end of the tunnel. The resulting
tunnel is a virtual private network or VPN.
This package contains the daemons and userland tools for setting up
Libreswan. To build KLIPS, see the kmod-libreswan.spec file.
Libreswan also supports IKEv2 (RFC4309) and Secure Labeling
Libreswan is based on Openswan-2.6.38 which in turn is based on FreeS/WAN-2.04
%prep
%setup -q -n libreswan-%{version}%{?prever}
%patch1 -p1
%patch2 -p1
%patch3 -p1
%patch4 -p1
%patch5 -p1
%build
%if %{buildefence}
%define efence "-lefence"
%endif
#796683: -fno-strict-aliasing
%{__make} \
%if %{development}
USERCOMPILE="-g -DGCC_LINT %(echo %{optflags} | sed -e s/-O[0-9]*/ /) %{?efence} -fPIE -pie -fno-strict-aliasing -Wformat-nonliteral -Wformat-security" \
%else
USERCOMPILE="-g -DGCC_LINT %{optflags} %{?efence} -fPIE -pie -fno-strict-aliasing -Wformat-nonliteral -Wformat-security" \
%endif
USERLINK="-g -pie -Wl,-z,relro,-z,now %{?efence}" \
INITSYSTEM=systemd \
USE_NM=%{USE_NM} \
USE_XAUTHPAM=true \
%if %{USE_FIPSCHECK}
USE_FIPSCHECK="%{USE_FIPSCHECK}" \
FIPSPRODUCTCHECK=/etc/system-fips \
%endif
USE_LIBCAP_NG="%{USE_LIBCAP_NG}" \
USE_LABELED_IPSEC="%{USE_LABELED_IPSEC}" \
%if %{USE_CRL_FETCHING}
USE_LDAP=true \
USE_LIBCURL=true \
%endif
USE_DNSSEC="%{USE_DNSSEC}" \
INC_USRLOCAL=%{_prefix} \
FINALLIBDIR=%{_libexecdir}/ipsec \
FINALLIBEXECDIR=%{_libexecdir}/ipsec \
MANTREE=%{_mandir} \
INC_RCDEFAULT=%{_initrddir} \
programs
FS=$(pwd)
%if %{USE_FIPSCHECK}
# Add generation of HMAC checksums of the final stripped binaries
%define __spec_install_post \
%{?__debug_package:%{__debug_install_post}} \
%{__arch_install_post} \
%{__os_install_post} \
fipshmac -d %{buildroot}%{_libdir}/fipscheck %{buildroot}%{_libexecdir}/ipsec/* \
fipshmac -d %{buildroot}%{_libdir}/fipscheck %{buildroot}%{_sbindir}/ipsec \
%{nil}
%endif
%install
rm -rf ${RPM_BUILD_ROOT}
%{__make} \
DESTDIR=%{buildroot} \
INC_USRLOCAL=%{_prefix} \
FINALLIBDIR=%{_libexecdir}/ipsec \
FINALLIBEXECDIR=%{_libexecdir}/ipsec \
MANTREE=%{buildroot}%{_mandir} \
INC_RCDEFAULT=%{_initrddir} \
INSTMANFLAGS="-m 644" \
INITSYSTEM=systemd \
install
FS=$(pwd)
rm -rf %{buildroot}/usr/share/doc/libreswan
install -d -m 0755 %{buildroot}%{_localstatedir}/run/pluto
# used when setting --perpeerlog without --perpeerlogbase
install -d -m 0700 %{buildroot}%{_localstatedir}/log/pluto/peer
install -d %{buildroot}%{_sbindir}
%if %{USE_FIPSCHECK}
mkdir -p %{buildroot}%{_libdir}/fipscheck
install -d %{buildroot}%{_sysconfdir}/prelink.conf.d/
install -m644 packaging/fedora/libreswan-prelink.conf %{buildroot}%{_sysconfdir}/prelink.conf.d/libreswan-fips.conf
%endif
echo "include /etc/ipsec.d/*.secrets" > %{buildroot}%{_sysconfdir}/ipsec.secrets
rm -fr %{buildroot}/etc/rc.d/rc*
%files
%doc CHANGES COPYING CREDITS README* LICENSE
# do not include obsoleted libreswan-3.8 documentation - use docs/* after rebase to 3.9+
%doc docs/CHANGES.* docs/CREDITS.* docs/README.labeledipsec docs/README.DPD docs/README.XAUTH
%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipsec.conf
%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/sysconfig/pluto
%attr(0600,root,root) %config(noreplace) %{_sysconfdir}/ipsec.secrets
%attr(0700,root,root) %dir %{_sysconfdir}/ipsec.d
%attr(0700,root,root) %dir %{_sysconfdir}/ipsec.d/cacerts
%attr(0700,root,root) %dir %{_sysconfdir}/ipsec.d/crls
%attr(0700,root,root) %dir %{_sysconfdir}/ipsec.d/policies
%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipsec.d/policies/*
%attr(0700,root,root) %dir %{_localstatedir}/log/pluto/peer
%attr(0755,root,root) %dir %{_localstatedir}/run/pluto
%attr(0644,root,root) %{_unitdir}/ipsec.service
%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/pam.d/pluto
%{_sbindir}/ipsec
%{_libexecdir}/ipsec
%attr(0644,root,root) %doc %{_mandir}/*/*
%if %{USE_FIPSCHECK}
%{_libdir}/fipscheck/*.hmac
# We own the directory so we don't have to require prelink
%attr(0755,root,root) %dir %{_sysconfdir}/prelink.conf.d/
%{_sysconfdir}/prelink.conf.d/libreswan-fips.conf
%endif
%preun
%systemd_preun ipsec.service
%postun
%systemd_postun_with_restart ipsec.service
%post
%systemd_post ipsec.service
if [ ! -f %{_sysconfdir}/ipsec.d/cert8.db ] ; then
TEMPFILE=$(/bin/mktemp %{_sysconfdir}/ipsec.d/nsspw.XXXXXXX)
[ $? -gt 0 ] && TEMPFILE=%{_sysconfdir}/ipsec.d/nsspw.$$
echo > ${TEMPFILE}
certutil -N -f ${TEMPFILE} -d %{_sysconfdir}/ipsec.d
restorecon %{_sysconfdir}/ipsec.d/*db 2>/dev/null || :
rm -f ${TEMPFILE}
fi
%changelog
* Thu Apr 10 2014 Paul Wouters <pwouters@redhat.com> - 3.8-5
- Resolves: rhbz#1052834 create_child_sa message ID handling
* Tue Mar 18 2014 Paul Wouters <pwouters@redhat.com> - 3.8-4
- Resolves: rhbz#1052834 create_child_sa response
* Wed Mar 05 2014 Paul Wouters <pwouters@redhat.com> - 3.8-3
- Resolves: rhbz#1069024 erroneous debug line with mixture [...]
- Resolves: rhbz#1030939 update nss/x509 documents, don't load acerts
- Resolves: rhbz#1058813 newhostkey returns zero value when it fails
* Fri Jan 24 2014 Daniel Mach <dmach@redhat.com> - 3.8-2
- Mass rebuild 2014-01-24
* Thu Jan 16 2014 Paul Wouters <pwouters@redhat.com> - 3.8-1
- Resolves: rhbz#CVE-2013-6467
- Resolves: rhbz#1043642 rebase to version 3.8
- Resolves: rhbz#1029912 ipsec force-reload doesn't work
- Resolves: rhbz#826261 Implement SHA384/512 support for Openswan
- Resolves: rhbz#1039655 ipsec newhostkey generates false configuration
* Fri Dec 27 2013 Daniel Mach <dmach@redhat.com> - 3.6-3
- Mass rebuild 2013-12-27
* Fri Nov 08 2013 Paul Wouters <pwouters@redhat.com> - 3.6-2
- Fix race condition in post for creating nss db
* Thu Oct 31 2013 Paul Wouters <pwouters@redhat.com> - 3.6-1
- Updated to version 3.6 (IKEv2, MODECFG, Cisco interop fixes)
- Generate empty NSS db if none exists
- FIPS update using /etc/system-fips
- Provide: openswan-doc
* Fri Aug 09 2013 Paul Wouters <pwouters@redhat.com> - 3.5-2
- rebuilt and bumped EVR to avoid confusion of import->delete->import
- require iproute
* Mon Jul 15 2013 Paul Wouters <pwouters@redhat.com> - 3.5-1
- Initial package for RHEL7
- Added interop patch for (some?) Cisco VPN clients sending 16 zero
bytes of extraneous IKE data
- Removed fipscheck_version