#!/bin/sh
#
# This comes from the dracut-logger.sh
#
# The logger defined 4 logging levels:
# - ddebug (4)
# The DEBUG Level designates fine-grained informational events that are most
# useful to debug an application.
# - dinfo (3)
# The INFO level designates informational messages that highlight the
# progress of the application at coarse-grained level.
# - dwarn (2)
# The WARN level designates potentially harmful situations.
# - derror (1)
# The ERROR level designates error events that might still allow the
# application to continue running.
#
# Logging is controlled by following global variables:
# - @var kdump_stdloglvl - logging level to standard error (console output)
# - @var kdump_sysloglvl - logging level to syslog (by logger command)
# - @var kdump_kmsgloglvl - logging level to /dev/kmsg (only for boot-time)
#
# If any of the variables is not set, the function dlog_init() sets it to default:
# - In the first kernel:
# - @var kdump_stdloglvl = 3 (info)
# - @var kdump_sysloglvl = 0 (no logging)
# - @var kdump_kmsgloglvl = 0 (no logging)
#
# -In the second kernel:
# - @var kdump_stdloglvl = 0 (no logging)
# - @var kdump_sysloglvl = 3 (info)
# - @var kdump_kmsgloglvl = 0 (no logging)
#
# First of all you have to start with dlog_init() function which initializes
# required variables. Don't call any other logging function before that one!
#
# The code in this file might be run in an environment without bash.
# Any code added must be POSIX compliant.
# Define vairables for the log levels in this module.
kdump_stdloglvl=""
kdump_sysloglvl=""
kdump_kmsgloglvl=""
# The dracut-lib.sh is only available in the second kernel, and it won't
# be used in the first kernel because the dracut-lib.sh is invisible in
# the first kernel.
if [ -f /lib/dracut-lib.sh ]; then
. /lib/dracut-lib.sh
fi
# @brief Get the log level from kernel command line.
# @retval 1 if something has gone wrong
# @retval 0 on success.
#
get_kdump_loglvl()
{
[ -f /lib/dracut-lib.sh ] && kdump_sysloglvl=$(getarg rd.kdumploglvl)
[ -z "$kdump_sysloglvl" ] && return 1;
if [ -f /lib/dracut-lib.sh ] && ! isdigit "$kdump_sysloglvl"; then
return 1
fi
return 0
}
# @brief Check the log level.
# @retval 1 if something has gone wrong
# @retval 0 on success.
#
check_loglvl()
{
case "$1" in
0|1|2|3|4)
return 0
;;
*)
return 1
;;
esac
}
# @brief Initializes Logger.
# @retval 1 if something has gone wrong
# @retval 0 on success.
#
dlog_init() {
ret=0
if [ -s /proc/vmcore ];then
if ! get_kdump_loglvl; then
logger -t "kdump[$$]" -p warn -- "Kdump is using the default log level(3)."
kdump_sysloglvl=3
fi
kdump_stdloglvl=0
kdump_kmsgloglvl=0
else
kdump_stdloglvl=$KDUMP_STDLOGLVL
kdump_sysloglvl=$KDUMP_SYSLOGLVL
kdump_kmsgloglvl=$KDUMP_KMSGLOGLVL
fi
[ -z "$kdump_stdloglvl" ] && kdump_stdloglvl=3
[ -z "$kdump_sysloglvl" ] && kdump_sysloglvl=0
[ -z "$kdump_kmsgloglvl" ] && kdump_kmsgloglvl=0
for loglvl in "$kdump_stdloglvl" "$kdump_kmsgloglvl" "$kdump_sysloglvl"; do
if ! check_loglvl "$loglvl"; then
echo "Illegal log level: $kdump_stdloglvl $kdump_kmsgloglvl $kdump_sysloglvl"
return 1
fi
done
# Skip initialization if it's already done.
[ -n "$kdump_maxloglvl" ] && return 0
if [ "$UID" -ne 0 ]; then
kdump_kmsgloglvl=0
kdump_sysloglvl=0
fi
if [ "$kdump_sysloglvl" -gt 0 ]; then
if [ -d /run/systemd/journal ] \
&& systemd-cat --version 1>/dev/null 2>&1 \
&& systemctl --quiet is-active systemd-journald.socket 1>/dev/null 2>&1; then
readonly _systemdcatfile="/var/tmp/systemd-cat"
mkfifo "$_systemdcatfile" 1>/dev/null 2>&1
readonly _dlogfd=15
systemd-cat -t 'kdump' --level-prefix=true <"$_systemdcatfile" &
exec 15>"$_systemdcatfile"
elif ! [ -S /dev/log ] && [ -w /dev/log ] || ! command -v logger >/dev/null; then
# We cannot log to syslog, so turn this facility off.
kdump_kmsgloglvl=$kdump_sysloglvl
kdump_sysloglvl=0
ret=1
errmsg="No '/dev/log' or 'logger' included for syslog logging"
fi
fi
kdump_maxloglvl=0
for _dlog_lvl in $kdump_stdloglvl $kdump_sysloglvl $kdump_kmsgloglvl; do
[ $_dlog_lvl -gt $kdump_maxloglvl ] && kdump_maxloglvl=$_dlog_lvl
done
readonly kdump_maxloglvl
export kdump_maxloglvl
if [ $kdump_stdloglvl -lt 4 ] && [ $kdump_kmsgloglvl -lt 4 ] && [ $kdump_sysloglvl -lt 4 ]; then
unset ddebug
ddebug() { :; };
fi
if [ $kdump_stdloglvl -lt 3 ] && [ $kdump_kmsgloglvl -lt 3 ] && [ $kdump_sysloglvl -lt 3 ]; then
unset dinfo
dinfo() { :; };
fi
if [ $kdump_stdloglvl -lt 2 ] && [ $kdump_kmsgloglvl -lt 2 ] && [ $kdump_sysloglvl -lt 2 ]; then
unset dwarn
dwarn() { :; };
unset dwarning
dwarning() { :; };
fi
if [ $kdump_stdloglvl -lt 1 ] && [ $kdump_kmsgloglvl -lt 1 ] && [ $kdump_sysloglvl -lt 1 ]; then
unset derror
derror() { :; };
fi
[ -n "$errmsg" ] && derror "$errmsg"
return $ret
}
## @brief Converts numeric level to logger priority defined by POSIX.2.
#
# @param $1: Numeric logging level in range from 1 to 4.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes logger priority.
_lvl2syspri() {
case "$1" in
1) echo error;;
2) echo warning;;
3) echo info;;
4) echo debug;;
*) return 1;;
esac
}
## @brief Converts logger numeric level to syslog log level
#
# @param $1: Numeric logging level in range from 1 to 4.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes kernel console numeric log level
#
# Conversion is done as follows:
#
# <tt>
# none -> LOG_EMERG (0)
# none -> LOG_ALERT (1)
# none -> LOG_CRIT (2)
# ERROR(1) -> LOG_ERR (3)
# WARN(2) -> LOG_WARNING (4)
# none -> LOG_NOTICE (5)
# INFO(3) -> LOG_INFO (6)
# DEBUG(4) -> LOG_DEBUG (7)
# </tt>
#
# @see /usr/include/sys/syslog.h
_dlvl2syslvl() {
case "$1" in
1) set -- 3;;
2) set -- 4;;
3) set -- 6;;
4) set -- 7;;
*) return 1;;
esac
# The number is constructed by multiplying the facility by 8 and then
# adding the level.
# About The Syslog Protocol, please refer to the RFC5424 for more details.
echo $((24 + $1))
}
## @brief Prints to stderr, to syslog and/or /dev/kmsg given message with
# given level (priority).
#
# @param $1: Numeric logging level.
# @param $2: Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dinfo(), ddebug(), or others instead which wrap this one.
#
# This is core logging function which logs given message to standard error
# and/or syslog (with POSIX shell command <tt>logger</tt>) and/or to /dev/kmsg.
# The format is following:
#
# <tt>X: some message</tt>
#
# where @c X is the first letter of logging level. See module description for
# details on that.
#
# Message to syslog is sent with tag @c kdump. Priorities are mapped as
# following:
# - @c ERROR to @c error
# - @c WARN to @c warning
# - @c INFO to @c info
# - @c DEBUG to @c debug
_do_dlog() {
[ "$1" -le $kdump_stdloglvl ] && printf -- 'kdump: %s\n' "$2" >&2
if [ "$1" -le $kdump_sysloglvl ]; then
if [ "$_dlogfd" ]; then
printf -- "<%s>%s\n" "$(($(_dlvl2syslvl "$1") & 7))" "$2" 1>&$_dlogfd
else
logger -t "kdump[$$]" -p "$(_lvl2syspri "$1")" -- "$2"
fi
fi
[ "$1" -le $kdump_kmsgloglvl ] && \
echo "<$(_dlvl2syslvl "$1")>kdump[$$] $2" >/dev/kmsg
}
## @brief Internal helper function for _do_dlog()
#
# @param $1: Numeric logging level.
# @param $2 [...]: Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dinfo(), ddebug(), or others instead which wrap this one.
#
# This function calls _do_dlog() either with parameter msg, or if
# none is given, it will read standard input and will use every line as
# a message.
#
# This enables:
# dwarn "This is a warning"
# echo "This is a warning" | dwarn
dlog() {
[ -z "$kdump_maxloglvl" ] && return 0
[ "$1" -le "$kdump_maxloglvl" ] || return 0
if [ $# -gt 1 ]; then
_dlog_lvl=$1; shift
_do_dlog "$_dlog_lvl" "$*"
else
while read -r line || [ -n "$line" ]; do
_do_dlog "$1" "$line"
done
fi
}
## @brief Logs message at DEBUG level (4)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
ddebug() {
set +x
dlog 4 "$@"
if [ -n "$debug" ]; then
set -x
fi
}
## @brief Logs message at INFO level (3)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dinfo() {
set +x
dlog 3 "$@"
if [ -n "$debug" ]; then
set -x
fi
}
## @brief Logs message at WARN level (2)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarn() {
set +x
dlog 2 "$@"
if [ -n "$debug" ]; then
set -x
fi
}
## @brief It's an alias to dwarn() function.
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarning() {
set +x
dwarn "$@"
if [ -n "$debug" ]; then
set -x
fi
}
## @brief Logs message at ERROR level (1)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
derror() {
set +x
dlog 1 "$@"
if [ -n "$debug" ]; then
set -x
fi
}