Name: kexec-tools
Version: 2.0.15
Release: 51%{?dist}.3
License: GPLv2
Group: Applications/System
Summary: The kexec/kdump userspace component.
Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.xz
Source1: kdumpctl
Source2: kdump.sysconfig
Source3: kdump.sysconfig.x86_64
Source5: kdump.sysconfig.ppc64
Source7: mkdumprd
Source8: kdump.conf
Source9: http://downloads.sourceforge.net/project/makedumpfile/makedumpfile/1.6.2/makedumpfile-1.6.2.tar.gz
Source10: kexec-kdump-howto.txt
Source11: fadump-howto.txt
Source12: mkdumprd.8
Source13: 98-kexec.rules
Source14: 98-kexec.rules.ppc64
Source15: kdump.conf.5
Source16: kdump.service
Source18: kdump.sysconfig.s390x
Source19: eppic_050615.tar.gz
Source20: kdump-lib.sh
Source21: kdump-in-cluster-environment.txt
Source22: supported-kdump-targets.txt
Source23: kdump-dep-generator.sh
Source24: kdump-lib-initramfs.sh
Source25: kdump-anaconda-addon-003-29-g4c517c5.tar.gz
Source26: kdump.sysconfig.ppc64le
Source27: kdump.sysconfig.aarch64
Source28: kdumpctl.8
Source29: kdump-udev-throttler
#######################################
# These are sources for mkdumpramfs
# Which is currently in development
#######################################
Source100: dracut-kdump.sh
Source101: dracut-module-setup.sh
Source102: dracut-monitor_dd_progress
Source103: dracut-kdump-error-handler.sh
Source104: dracut-kdump-emergency.service
Source105: dracut-kdump-error-handler.service
Source106: dracut-kdump-capture.service
Source107: dracut-kdump-emergency.target
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
Requires(pre): coreutils sed zlib
Requires: dracut >= 033-552
Requires: dracut-network >= 033-552
Requires: ethtool
BuildRequires: zlib-devel zlib zlib-static elfutils-devel-static glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel
BuildRequires: pkgconfig intltool gettext
BuildRequires: systemd-units
%ifarch %{ix86} x86_64 ppc64 ia64 ppc s390x ppc64le aarch64
Obsoletes: diskdumputils netdump
%endif
#START INSERT
#
# Patches 0 through 100 are meant for x86 kexec-tools enablement
#
Patch0: kexec-tools-2.0.15-i386-kdump-fix-an-error-that-can-not-parse-the-e820-reser.patch
#
# Patches 101 through 200 are meant for x86_64 kexec-tools enablement
Patch101: kexec-tools-2.0.15-makedumpfile-x86_64-Take-care-of-init_level4_pgt-rename-.patch
#
#
# Patches 201 through 300 are meant for ia64 kexec-tools enablement
#
#
# Patches 301 through 400 are meant for ppc64 kexec-tools enablement
#
Patch301: kexec-tools-2.0.15-ppc64-fix-how-RMA-top-is-deduced.patch
Patch302: kexec-tools-2.0.15-ppc64-fix-command-line-overflow-error.patch
Patch303: kexec-tools-2.0.15-ppc64-avoid-adding-coherent-memory-regio.patch
Patch304: kexec-tools-2.0.15-ppc64-fix-leak-while-checking-for-cohere.patch
Patch305: kexec-tools-2.0.15-makedumpfile-ppc64-get-the-info-of-mem-reserved-for-.patch
Patch306: kexec-tools-2.0.15-makedumpfile-ppc64-set-page_offset-in-get_versiondep.patch
#
# Patches 401 through 500 are meant for s390 kexec-tools enablement
#
#
# Patches 501 through 600 are meant for ppc kexec-tools enablement
#
#
# Patches 601 through 700 are meant for arm64 kexec-tools enablement
#
#
# Patches 701 onward are generic patches
#
Patch702: kexec-tools-2.0.15-makedumpfile-Fix-SECTION_MAP_MASK-for-kernel-v.13.patch
Patch703: kexec-tools-2.0.15-makedumpfile-Support-symbol-__cpu_online_mask.patch
Patch704: kexec-tools-2.0.15-makedumpfile-Introduce-vtop4_x86_64_pagetable.patch
Patch705: kexec-tools-2.0.15-makedumpfile-sadump-Fix-a-KASLR-problem-of-sadump.patch
Patch706: kexec-tools-2.0.15-makedumpfile-sadump-Fix-a-KASLR-problem-of-sadump-wh.patch
Patch707: kexec-tools-2.0.15-makedumpfile-book3s-ppc64-Lower-the-max-real-address-to-53-bits.patch
Patch708: kexec-tools-2.0.15-makedumpfile-Fix-kernel_version-variable-being-uninitia.patch
Patch709: kexec-tools-2.0.15-makedumpfile-Fix-off-by-one-errors-in-exclude_segment.patch
Patch710: kexec-tools-2.0.15-makedumpfile-Fix-physical-to-virtual-conversion-in-excl.patch
Patch711: kexec-tools-2.0.15-makedumpfile-sadump-Fix-a-problem-of-PTI-enabled-kernel.patch
Patch712: kexec-tools-2.0.15-makedumpfile-PATCH-Support-newer-kernels.patch
Patch713: kexec-tools-2.0.15-makedumpfile-fix-for-hugepages-filtering.patch
Patch714: kexec-tools-2.0.15-makedumpfile-Add-a-new-helper-file-tools.c-that-provides-some-use.patch
Patch715: kexec-tools-2.0.15-makedumpfile-arm64-Add-support-to-read-symbols-like-_stext-from-p.patch
Patch716: kexec-tools-2.0.15-makedumpfile-Documentation-Update-documentation-regarding-mem-usa.patch
Patch717: kexec-tools-2.0.15-makedumpfile-arm64-Fix-calculation-of-page_offset-in-case-we-are-.patch
Patch718: kexec-tools-2.0.15-makedumpfile-Fix-array-index-out-of-bound-exception.patch
Patch719: kexec-tools-2.0.15-makedumpfile-Use-integer-arithmetics-for-th.patch
Patch720: kexec-tools-2.0.15-makedumpfile-Use-monotonic-clock-to-calculate-ETA-and-s.patch
Patch721: kexec-tools-2.0.15-makedumpfile-Check-if-clock_gettime-requires-lrt.patch
Patch722: kexec-tools-2.0.15-makedumpfile-when-refiltering-initialize-refiltered-bitm.patch
Patch723: kexec-tools-2.0.15-makedumpfile-Update-help-text-to-indicate-mem-usage-is-supp.patch
Patch724: kexec-tools-2.0.15-makedumpfile-exclude-pages-that-are-logically-offline.patch
Patch725: kexec-tools-2.0.15-makedumpfile-x86_64-Add-support-for-AMD-Secure-Memory-Encry.patch
Patch726: kexec-tools-2.0.15-Limit-the-size-of-vmcore-dmesg.txt-to-2G.patch
Patch727: kexec-tools-2.0.15-vmcore-dmesg-vmcore-dmesg.c-Fix-shifting-error-repor.patch
Patch728: kexec-tools-2.0.15-makedumpfile-x86_64-Fix-incorrect-exclusion-by-e-option-wit.patch
Patch729: kexec-tools-2.0.15-makedumpfile-sadump-kaslr-fix-failure-of-calculating-kaslr.patch
#
# Patch 701 through 800 are meant for kdump anaconda addon
#
%description
kexec-tools provides /sbin/kexec binary that facilitates a new
kernel to boot using the kernel's kexec feature either on a
normal or a panic reboot. This package contains the /sbin/kexec
binary and ancillary utilities that together form the userspace
component of the kernel's kexec feature.
%ifarch %{ix86} x86_64 ia64 ppc64 s390x ppc64le aarch64
%package eppic
Requires: %{name} = %{version}-%{release}
Summary: Additional eppic_makedumpfile.so shared object
Group: Applications/System
%description eppic
The eppic_makedumpfile.so shared object is loaded by the
"makedumpfile --eppic" option, and is used to erase sensitive
or confidential kernel data from a dumpfile.
%endif
%package anaconda-addon
Summary: Kdump configration anaconda addon
Requires: anaconda >= 19.31.85
%description anaconda-addon
Kdump anaconda addon
%prep
%setup -q
mkdir -p -m755 kcp
tar -z -x -v -f %{SOURCE9}
tar -z -x -v -f %{SOURCE19}
tar -z -x -v -f %{SOURCE25}
%patch0 -p1
%patch101 -p1
%patch301 -p1
%patch302 -p1
%patch303 -p1
%patch304 -p1
%patch305 -p1
%patch306 -p1
%patch702 -p1
%patch703 -p1
%patch704 -p1
%patch705 -p1
%patch706 -p1
%patch707 -p1
%patch708 -p1
%patch709 -p1
%patch710 -p1
%patch711 -p1
%patch712 -p1
%patch713 -p1
%patch714 -p1
%patch715 -p1
%patch716 -p1
%patch717 -p1
%patch718 -p1
%patch719 -p1
%patch720 -p1
%patch721 -p1
%patch722 -p1
%patch723 -p1
%patch724 -p1
%patch725 -p1
%patch726 -p1
%patch727 -p1
%patch728 -p1
%patch729 -p1
%ifarch ppc
%define archdef ARCH=ppc
%endif
%build
%ifarch ia64 aarch64
# ia64 gcc seems to have a problem adding -fexception -fstack-protect and
# -param ssp-protect-size, like the configure macro does
# while that shouldn't be a problem, and it still builds fine, it results in
# the kdump kernel hanging on kexec boot. I don't yet know why, but since those
# options aren't critical, I'm just overrideing them here for ia64
# aarch64 does not like -fexception as well, so overwrite it.
export CFLAGS="-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2"
%endif
%configure \
%ifarch ppc64
--host=powerpc64-redhat-linux-gnu \
--build=powerpc64-redhat-linux-gnu \
%endif
%ifarch ppc64le
--host=powerpc64le-redhat-linux-gnu \
--build=powerpc64le-redhat-linux-gnu \
%endif
--sbindir=/sbin
rm -f kexec-tools.spec.in
# setup the docs
cp %{SOURCE10} .
cp %{SOURCE11} .
cp %{SOURCE21} .
cp %{SOURCE22} .
make
%ifarch %{ix86} x86_64 ia64 ppc64 s390x ppc64le aarch64
make -C eppic/libeppic
make -C makedumpfile-1.6.2 LINKTYPE=dynamic USELZO=on USESNAPPY=on
make -C makedumpfile-1.6.2 LDFLAGS="-I../eppic/libeppic -L../eppic/libeppic" eppic_makedumpfile.so
%endif
make -C kdump-anaconda-addon/po
%install
mkdir -p -m755 $RPM_BUILD_ROOT/sbin
mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig
mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash
mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/
mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/
mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump
mkdir -p -m755 $RPM_BUILD_ROOT%{_udevrulesdir}
mkdir -p $RPM_BUILD_ROOT%{_unitdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump
install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl
install -m 755 build/sbin/kexec $RPM_BUILD_ROOT/sbin/kexec
install -m 755 build/sbin/vmcore-dmesg $RPM_BUILD_ROOT/sbin/vmcore-dmesg
install -m 644 build/man/man8/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/
install -m 644 build/man/man8/vmcore-dmesg.8 $RPM_BUILD_ROOT%{_mandir}/man8/
SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}
[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}
[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig
install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump
install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/sbin/mkdumprd
install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf
install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8
install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8
install -m 644 %{SOURCE28} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8
install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh
install -m 755 %{SOURCE24} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh
%ifnarch s390x
install -m 755 %{SOURCE29} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler
%endif
%ifnarch s390x ppc64 ppc64le
# For s390x the ELF header is created in the kdump kernel and therefore kexec
# udev rules are not required
install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules
%endif
%ifarch ppc64 ppc64le
install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules
%endif
install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5
install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service
install -m 755 -D %{SOURCE23} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh
%ifarch %{ix86} x86_64 ia64 ppc64 s390x ppc64le aarch64
install -m 755 makedumpfile-1.6.2/makedumpfile $RPM_BUILD_ROOT/sbin/makedumpfile
install -m 644 makedumpfile-1.6.2/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz
install -m 644 makedumpfile-1.6.2/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz
install -m 644 makedumpfile-1.6.2/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample
install -m 755 makedumpfile-1.6.2/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so
mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/
install -m 644 makedumpfile-1.6.2/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/
%endif
make -C kdump-anaconda-addon install DESTDIR=$RPM_BUILD_ROOT
%find_lang kdump-anaconda-addon
%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')
# deal with dracut modules
mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase
cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}
cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}
cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}
cp %{SOURCE103} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE103}}
cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE104}}
cp %{SOURCE105} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE105}}
cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}}
cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}
%define dracutlibdir %{_prefix}/lib/dracut
#and move the custom dracut modules to the dracut directory
mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/
mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/
%post
# Initial installation
%systemd_post kdump.service
touch /etc/kdump.conf
# This portion of the script is temporary. Its only here
# to fix up broken boxes that require special settings
# in /etc/sysconfig/kdump. It will be removed when
# These systems are fixed.
if [ -d /proc/bus/mckinley ]
then
# This is for HP zx1 machines
# They require machvec=dig on the kernel command line
sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \
/etc/sysconfig/kdump > /etc/sysconfig/kdump.new
mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump
elif [ -d /proc/sgi_sn ]
then
# This is for SGI SN boxes
# They require the --noio option to kexec
# since they don't support legacy io
sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \
/etc/sysconfig/kdump > /etc/sysconfig/kdump.new
mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump
fi
%postun
%systemd_postun_with_restart kdump.service
%preun
# Package removal, not upgrade
%systemd_preun kdump.service
%triggerun -- kexec-tools < 2.0.2-3
# Save the current service runlevel info
# User must manually run systemd-sysv-convert --apply kdump
# to migrate them to systemd targets
/usr/bin/systemd-sysv-convert --save kdump >/dev/null 2>&1 ||:
# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del kdump >/dev/null 2>&1 || :
/bin/systemctl try-restart kdump.service >/dev/null 2>&1 || :
%triggerin -- kernel-kdump
touch %{_sysconfdir}/kdump.conf
%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump
# List out the initrds here, strip out version nubmers
# and search for corresponding kernel installs, if a kernel
# is not found, remove the corresponding kdump initrd
#start by getting a list of all the kdump initrds
MY_ARCH=`uname -m`
if [ "$MY_ARCH" == "ia64" ]
then
IMGDIR=/boot/efi/efi/redhat
else
IMGDIR=/boot
fi
for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null`
do
KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'`
if [ ! -e $IMGDIR/vmlinuz-$KDVER ]
then
# We have found an initrd with no corresponding kernel
# so we should be able to remove it
rm -f $i
fi
done
%files
/sbin/kexec
/sbin/vmcore-dmesg
%ifarch %{ix86} x86_64 ia64 ppc64 s390x ppc64le aarch64
/sbin/makedumpfile
%endif
/sbin/mkdumprd
%{_bindir}/*
%{_datadir}/kdump
%{_prefix}/lib/kdump
%ifarch %{ix86} x86_64 ia64 ppc64 s390x ppc64le aarch64
%{_sysconfdir}/makedumpfile.conf.sample
%endif
%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump
%config(noreplace,missingok) %verify(not mtime) %{_sysconfdir}/kdump.conf
%ifnarch s390x
%config %{_udevrulesdir}
%{_udevrulesdir}/../kdump-udev-throttler
%endif
%{dracutlibdir}/modules.d/*
%dir %{_localstatedir}/crash
%{_mandir}/man8/kdumpctl.8.gz
%{_mandir}/man8/kexec.8.gz
%ifarch %{ix86} x86_64 ia64 ppc64 s390x ppc64le aarch64
%{_mandir}/man8/makedumpfile.8.gz
%endif
%{_mandir}/man8/mkdumprd.8.gz
%{_mandir}/man8/vmcore-dmesg.8.gz
%{_mandir}/man5/*
%{_unitdir}/kdump.service
%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh
%doc News
%doc COPYING
%doc TODO
%doc kexec-kdump-howto.txt
%doc fadump-howto.txt
%doc kdump-in-cluster-environment.txt
%doc supported-kdump-targets.txt
%ifarch %{ix86} x86_64 ia64 ppc64 s390x ppc64le aarch64
%files eppic
%{_libdir}/eppic_makedumpfile.so
/usr/share/makedumpfile/eppic_scripts/
%endif
%files anaconda-addon -f kdump-anaconda-addon.lang
%{_datadir}/anaconda/addons/com_redhat_kdump
%{_datadir}/icons/hicolor/scalable/apps/kdump.svg
%doc
%changelog
* Thu Apr 22 2021 Pingfan Liu <piliu@redhat.com> 2.0.15-51.3
- Throttle kdump reload request triggered by udev event
* Fri Mar 5 2021 Pingfan Liu <piliu@redhat.com> 2.0.15-51.2
- kdumpctl: fix a variable expansion in check_fence_kdump_config()
* Mon Sep 7 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-51.1
- makedumpfile/sadump: Fix a KASLR problem of sadump while kdump is working
* Fri Jun 19 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-51
- Add a new option 'rd.znet_ifname' in order to use it in udev rules
* Wed May 27 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-50
- Revert: Always set vm.zone_reclaim_mode = 3 in kdump kernel
* Mon Apr 20 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-49
- dracut-module-setup.sh: fix breakage in get_pcs_fence_kdump_nodes().
* Fri Apr 10 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-48
- dracut-module-setup.sh: ensure cluster info is ready before query.
- dracut-module-setup.sh: improve get_alias()
* Thu Mar 26 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-47
- mkdumprd: don't append noauto to mount option.
- Add NOTE about nr_cpus value on HyperV systems.
* Mon Mar 23 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-46
- Always drop nofail or nobootwait options
- Always set vm.zone_reclaim_mode = 3 in kdump kernel
* Wed Mar 18 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-45
- mkdumprd: Use DUMP_TARGET which printing error message during ssh
* Mon Mar 09 2020 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-44
- module-setup: Ensure eth devices get IP address for VLAN
* Wed Oct 23 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-43
- module-setup: re-fix 99kdumpbase network dependency
- kdumpctl: bail out immediately if host key verification failed
* Mon Oct 14 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-42
- makedumpfile: x86_64: Fix incorrect exclusion by -e option with KASLR
* Tue Sep 24 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-41
- kdumpctl: echo msg when waiting for connection
* Thu Sep 19 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-40
- Doc: amend the man page of kdump.conf
* Mon Sep 16 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-39
- vmcore-dmesg/vmcore-dmesg.c: Fix shifting error reported by cppcheck
* Tue Sep 10 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-38
- Limit the size of vmcore-dmesg.txt to 2G
- dracut-module-setup: fix bond ifcfg processing
* Tue Sep 3 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-37
- dracut-module-setup: get localhost alias by manual
- dracut-module-setup: filter out localhost for generic_fence_kdump
- kdumpctl: distinguish the reason for ssh failure
* Wed Aug 14 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-36
- kdumpctl: wait a while for network ready if dump target is ssh
* Tue Aug 13 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-35
- dracut-module-setup.sh: skip alias of localhost in get_pcs_fence_kdump_nodes()
* Tue Jul 30 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-34
- kdump.sysconfig/x86_64: Disable HEST by default
- Introduce kdumpctl rebuild command and update document
* Sat Jun 22 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-33
- makedumpfile: x86_64: Add support for AMD Secure Memory Encryption
[Fix the Fix the patch to make sure makedumpfile-1.6.2/ path is used]
* Fri Jun 21 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-32
- makedumpfile: exclude pages that are logically offline
- makedumpfile: x86_64: Add support for AMD Secure Memory Encryption
* Mon Jun 10 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-31
- Disable vmcore device dump by default
* Wed May 22 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-30
- Optimize kdumpctl restart and initramfs rebuild speed
* Thu May 9 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-29
- Fix previous faulty initramfs rebuild triggering
* Thu May 9 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-28
- kexec.rules: create dedicated udev rules for ppc64
* Wed Mar 27 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-27
- kexec-kdump-howto: Add note on setting correct value of kptr_restrict
* Mon Mar 18 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-26
- fadump: leverage kernel support to re-regisgter FADump
* Mon Mar 18 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-25
- Make udev reload rules quiet during bootup
* Thu Mar 7 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-24
- mkdumprd: use --quiet dracut argument to speedup initramfs build
- mkdumprd: refine regex on dropping mount options
* Fri Feb 8 2019 Bhupesh Sharma <bhsharma@redhat.com> 2.0.15-23
- kdump: fix an error that can not parse the e820 reserved region
- Doc: add document to declare atlantic support
* Fri Jan 18 2019 Pingfan Liu <piliu@redhat.com> 2.0.15-22
- doc/kdump.conf: Local dump path should be <mnt>/<path>/%HOST_IP-%DATE
- Update help text to indicate --mem-usage is supported on archs other than x86_64
- Add missing usage info
- Rewrite kdump's udev rules, use reload instead of restart
- kdumpctl: Add reload support
* Thu Aug 30 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-21
- kexec/ppc64: add support to parse ibm, dynamic-memory-v2
* Wed Aug 15 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-20
- makedumpfile: when refiltering, initialize refiltered bitmap2 from the kdump file's bitmap2
- dracut-module-setup: Fix DRM module inclusion test for hyper-v
- kdumpctl: remove some cmdline inheritage from 1st kernel
- kdump-lib.sh:get_loaded_kernel_modules() Fix missing newline
- kdumpctl: Rebuild initramfs if loaded kernel modules changed (V2)
- Revert "kdumpctl: Rebuild initramfs if loaded kernel modules changed"
- dracut-module-setup: Fix test for inclusion of DRM modules
* Wed Aug 01 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-19
kexec-tools.spec: Drop kexec-tools-2.0.3-disable-kexec-test.patch
Remove obsolete kdump tool
* Tue Jul 31 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-18
kdumpctl: Rebuild initramfs if loaded kernel modules changed
dracut-module-setup.sh: don't include multipath-hostonly
Add document to declare FCoE support (V2)
Revert "Add document to declare FCoE support"
Add document to declare FCoE support
makedumpfile: fix makedumpfile Not tainted in 2nd kernel
* Tue Jul 10 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-17
- arm64: Fix calculation of page_offset in case we are running cases other than mem-usage
* Fri Jun 22 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-16
- kexec/ppc64: add support to parse ibm, dynamic-memory-v2
* Thu Jun 21 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-15
- dracut-module-setup.sh: pass ip=either6 param for ipv6
- dracut-module-setup.sh: install /etc/hosts when using fence_kdump
- update kdump-anaconda-addon-003-29-g4c517c5.tar.gz
* Tue Jun 19 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-14
- kdumpctl: Remove 'netroot' and 'iscsi initiator' entries from kdump cmdline
- doc: remove btrfs from supported filesystems list
- Update kdump anaconda addon
- makedumpfile/arm64: Add '--mem-usage' support
- Fix warning about persistent device name not found.
- kdumpctl: Check the modification time of core_collector
- kdump.sysconfig.x86_64: Remove 'notsc' from KDUMP_COMMANDLINE_REMOVE
- makedumpfile: fix for hugepages filtering
* Thu Feb 8 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-13
* Thu Feb 1 2018 Pingfan Liu <piliu@redhat.com> 2.0.15-12
- makedumpfile/sadump: Fix a problem of PTI enabled kernel
- makedumpfile: Fix physical-to-virtual conversion in 'exclude_segment()'
* Tue Dec 12 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-11
- dracut-module-setup.sh: temporary install /bin/grep to work around dracut's bug
- kdump.sysconfig/x86_64: Add nokaslr to kdump kernel cmdline
- kdumpctl: skip selinux-relabel for dracut_args --mount dump target
* Mon Dec 11 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-10
- kexec-tools.spec: require dracut >= 033-522 to make 99kdump module installed correctly
- kdump.sysconfig.ppc64(le): remove "root=" param from ppc64(le) 2nd kernel's command line
- Revert "kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors"
* Wed Nov 29 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-9
- makedumpfile: Fix 'kernel_version' variable being uninitialized & introduce minor reorganization
- makedumpfile: Fix segmentation fault when using --split on a vmcore
- dracut-module-setup.sh: check whether to include multipath-hostonly or not
* Tue Nov 14 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-8
- kdumpctl: Error out in case there are white spaces before an option name
* Mon Nov 13 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-7
- mkdumprd: apply dracut "--hostonly-cmdline" and "--no-hostonly-default-device"
- Change dump_to_rootfs to use "--mount" instead of "root=X"
- kdumpctl: move is_fadump_capable() to kdump-lib.sh
- module-setup: fix 99kdumpbase network dependency
- mkdumprd: change for_each_block_target() to use get_kdump_targets()
- kdump-lib.sh: introduce get_kdump_targets()
- kdump-lib.sh: fix improper get_block_dump_target()
- kdumpctl: remove "root=X" for kdump boot
- kdumpctl: fix a bug in remove_cmdline_param()
* Fri Nov 10 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-6
- Fix KASLR problem on sadump
* Wed Nov 8 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-5
- Revert "Update kdump anaconda addon"
- Revert "Update kdump anaconda addon: fix the md5sum in source file"
* Fri Nov 3 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-4
- Update kdump anaconda addon: fix the md5sum in source file
- Update kdump anaconda addon
* Fri Nov 3 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-3
- makedumpfile: x86_64: Take care of init_level4_pgt rename in kernel
- makedumpfile: ppc64: get the info of mem reserved for crashkernel
- makedumpfile: Fix SECTION_MAP_MASK for kernel >= v.13
* Wed Oct 25 2017 Pingfan Liu <piliu@redhat.com> 2.0.15-2
- mkdumprd: fix patterns to modify mount options
- kexec-tools/ppc64: avoid adding coherent memory regions to crash memory ranges
- kexec-tools/ppc64: fix command line overflow error
- kexec-tools/ppc64: fix how RMA top is deduced
* Wed Sep 27 2017 Baoquan He <bhe@redhat.com> - 2.0.15-1
- kexec-tools: Rebase from 2.0.14 to 2.0.15
* Thu Sep 14 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-19
makedumpfile: rebase makedumpfile from 1.6.1 to 1.6.2
* Fri Aug 25 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-18
mkdumprd: remove useless "x-initrd.mount"
kdumpctl: use "apicid" other than "initial apicid"
kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors
kdumpctl: change prepare_cmdline() to operate KDUMP_COMMANDLINE directly
mkdumprd: use 300s as the default systemd unit timeout for kdump mount
mkdumprd: reduce lvm2 memory under kdump
module-setup: suppress the early iscsi error messages
kdumpctl: fix infinite loop caused by running under bash
* Tue Jun 27 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-17
- revert udev rule changes
* Fri Jun 23 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-16
- udev rules: fix the hotplug rule file removing path
* Thu Jun 22 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-15
- Revert "pc64/ppc64le: drop cpu online rule in 40-redhat.rules in kdump initramfs"
- udev rules: mask cpu hotplug rules
* Mon Jun 12 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-14
- kdump.conf.5: clarify the fence_kdump_nodes option
- kdumpctl: for fence_kdump, the ipaddr of this node should be excluded from list
* Wed Jun 7 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-13
- kdumpctl: change the shebang header to use /bin/bash
* Thu Jun 1 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-12
- kdump.sysconfig.x86_64: remove kaslr in kdump kernel cmdline
- Revert commit b590153 kdump.sysconfig/x86_64: Add nokaslr to kdump kernel cmdline
* Wed May 31 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-11
- makedumpfile: Fix refiltering, sadump and virsh dump
* Mon May 15 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-10
- kdumpctl: call strip_comments only when necessary to speedup
- Revert "kdumpctl: improve "while read" time for /etc/kdump.conf"
* Tue May 9 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-9
- kdumpctl: bail out earlier in case of no reserved memory
- kdumpctrl: kdump feasibility should fail if no crash memory
- kdumpctl: improve "while read" time for /etc/kdump.conf
- kdumpctl: update check_dump_fs_modified() to use "lsinitrd -f"
- kdumpctl: improve check_wdt_modified()
- kdumpctl: remove is_mode_switched()
- arm64: cmdline: modify to optimize size for memory reservation
* Mon May 8 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-8
- kdump.sysconfig/x86_64: Add nokaslr to kdump kernel cmdline
* Fri Apr 28 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-7
- arm64: Increase the upper limit for RAM segments
- kdump: Introduce 'force_no_rebuild' option
- kdump-lib-initramfs.sh: ignore the failure of echo
- use "systemctl reboot -f" for reboot action
* Thu Apr 13 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-6
- Update kdump anaconda addon
* Mon Apr 10 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-5
- ppc64: Reduce number of ELF LOAD segments
- kexec-kdump-howto: Include notes about using debug kernel as crash kernel
- Correct two typos in kdumpctl and kdump.conf
* Sat Apr 1 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-4
- kdump-emergency: fix "Transaction is destructive" emergency failure
- x86: Support large number of memory ranges
* Mon Mar 20 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-3
- arm64: backport latest kdump patches
- Fix `makedumpfile --mem-usage /proc/kcore`
- kdump-lib.sh: fix incorrect usage with pipe as input for grep -q in is_pcs_fence_kdump()
* Mon Mar 6 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-2
- kdumpctl: check the existence of /sys/kernel/security/securelevel
- kdump.sysconfig.x86_64: Remove 'notsc' from kdump kernel cmdline
- kdump.sysconfig: add KDUMP_COMMANDLINE_REMOVE for aarch64 and ia64
- kdump.sysconfig: add KDUMP_COMMANDLINE_REMOVE
- Document: fix incorrect link in fadump-how.txt
- kexec-tools.spec: add %doc for fadump-howto.txt
* Fri Feb 24 2017 Pingfan Liu <piliu@redhat.com> - 2.0.14-1
- rebase kexec-tools from 2.0.7 to 2.0.14
* Thu Feb 23 2017 Pingfan Liu <piliu@redhat.com> - 2.0.7-54
- fix the build error of Release 2.0.7-53
* Thu Feb 23 2017 Pingfan Liu <piliu@redhat.com> - 2.0.7-53
- makedumpfile: rebase makedumpfile from 1.6.0 to 1.6.1
* Thu Feb 23 2017 Pingfan Liu <piliu@redhat.com> - 2.0.7-52
- kdumpctl: check /etc/fstab modification only when it exists
- kdumpctl: remove duplicate statement
- kdumpctl: Kill duplicate code related to file modication check
- fadump: restore default initrd when fadump mode is disabled
- kdump/fadump: fix network interface name when switching from fadump to kdump
* Thu Feb 23 2017 Pingfan Liu <piliu@redhat.com> - 2.0.7-51
- Update kdump anaconda addon
* Mon Sep 05 2016 Baoquan He <bhe@redhat.com> - 2.0.7-50
- spec: Update to add dependency on dracut-network version >= 033-449
- mkdumprd: Do not add "nfs" dracut module explicitly
- kexec-kdump-howto: Add doc about the special mount information via "dracut_args"
- Support special mount information via "dracut_args"
* Wed Aug 17 2016 Baoquan He <bhe@redhat.com> - 2.0.7-49
- fa9c082 kexec: Remedy the incomplete fix about persistent memory back porting
* Wed Jul 27 2016 Baoquan He <bhe@redhat.com> - 2.0.7-48
- arm64: prefer reading memory ranges from iomem over fdt
* Mon Jul 25 2016 Baoquan He <bhe@redhat.com> - 2.0.7-47
- spec: Update to add dependency on dracut version >= 033-449
- watchdog: do not add watchdog module in rd.driver.pre now
- howto: Notes on watchdog module handling
- kdumpctl: force rebuild in case of watchdog state change
- mkdumprd: Add dracut watchdog module as default option
* Mon Jul 25 2016 Baoquan He <bhe@redhat.com> - 2.0.7-46
- kexec-kdump-howto:Add introduction of parallel dumping
* Wed Jul 20 2016 Baoquan He <bhe@redhat.com> - 2.0.7-45
- kdump.conf man page fixes
- kdump.conf comments fixes
- Add persistent memory support
- module-setup: Don't handle iBFT in kdump
* Fri Jul 08 2016 Baoquan He <bhe@redhat.com> - 2.0.7-44
- Update kdump anaconda addon
- kdumpctl: Do not rebuild initramfs when $KDUMP_BOOTDIR is read only
- get_persistent_dev(): fix name contention with dracut's similar function
* Mon Jul 04 2016 Baoquan He <bhe@redhat.com> - 2.0.7-43
- kexec/sadump: Back port two patches to fix regression bug of makedumpfile 1.6.0
- Makedumpfile: Rebase to 1.6.0
* Fri Jun 17 2016 Baoquan He <bhe@redhat.com> - 2.0.7-42
- module-setup: Use get_ifcfg_filename() to get the proper ifcfg file
- kdump-lib: Add get_ifcfg_filename() to get the proper ifcfg file
- doc: add nfs to supported filesystems list
* Sun Jun 12 2016 Baoquan He <bhe@redhat.com> - 2.0.7-41
- Update kdump anaconda addon
* Mon Jun 06 2016 Baoquan He <bhe@redhat.com> - 2.0.7-40
- kdumpctl: force rebuild in case of file system is modified
- mkdumprd: move to_dev_name() & get_persistent_dev() to kdump-lib.sh
- kdumpctl: Move file modification check logic in check_system_modified()
- kdumpctl: force rebuild in case of dynamic system modification
- mkdumprd: do not lookup in by-uuid dirs for raw device's persistent name
* Thu May 19 2016 Baoquan He <bhe@redhat.com> - 2.0.7-39
- Remove duplicate prefix path ${initdir}
- Document declaration to support iSCSI HBA (ALL OFFLOAD)
- kdump.init: fix a typo
- rpm spec: add two patches to fix ppc64 kexec boot issue
- kexec-tools ppc64: add arch option --dt-no-old-root
- kexec-tools fs2dt.c: move copy old root param as a new function
- kdumpctl: Remove slub_debug from cmdline
* Wed Oct 21 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-38
- pc64/ppc64le: drop cpu online rule in 40-redhat.rules in kdump initramfs
* Fri Sep 18 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-37
- mkdumprd: install only local i18n files
* Wed Sep 9 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-36
- Update kdump anaconda addon
* Wed Aug 19 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-35
- kdumpctl: Add man page for kdumpctl
* Fri Aug 14 2015 Baoquan He <bhe@redhat.com> - 2.0.7-34
arm64: Overwrite CFLAGS and remove -fno-exceptions from kexec purgatory code
Fix comment to exclude keyword %configure
Revert "arm64: move -fno-exceptions from purgatory code to spec file"
* Fri Aug 14 2015 Baoquan He <bhe@redhat.com> - 2.0.7-33
mkdumprd: Remove ifcfg from dracut's modules
arm64: move -fno-exceptions from purgatory code to spec file
module-setup: Choose the first matched gateway in kdump_static_ip
* Fri Aug 7 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-32
- Enhance Kdump to support ipv6 protocol
* Wed Aug 5 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-31
- ppc64: Erase unnecessary segment info printing
- Update kdump addon
* Tue Jul 28 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-30
- watchdog: load iTCO_wdt early in cmdline hook
* Thu Jul 23 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-29
- Update kdump addon tarball
* Mon Jul 13 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-28
- eppic: update to include ARM64 support
- Update kdump addon icon
* Tue Jul 7 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-27
- dracut-module-setup: Apply the manual DNS to the 2nd kernel
- makedumpfile: --split: assign fair I/O workloads in appropriate time
- makedumpfile: Support producing a consistent dump file even if disk space is insufficient
- Disable transparent hugepages in second kernel
* Tue Jun 23 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-26
- kdumpctl: Add the command "kdumpctl showmem" to show the reserved memory
- Enhance kdump.conf "default" parameters check.
- Filtered out "noauto" options in 2nd kernel fstab
- make kdump work when kernel crash after shutdown
* Wed Jun 10 2015 Dave Young <dyoung@redhat.com> - 2.0.7-25
- Update kdump addon tarball
* Mon May 18 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-24
- Enhance kdump to support ARM64 arch
* Mon May 18 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-23
- Fix the date for the changelog
* Mon May 18 2015 Minfei Huang <mhuang@redhat.com> - 2.0.7-22
- remove panic_on_warn from 2nd kernel cmdline
* Tue Apr 21 2015 Baoquan He <bhe@redhat.com> - 2.0.7-21
- dracut-module-setup: Enhance kdump to support the bind mounted feature in Atomic
- Fix the warning if the target path is bind mount in Atomic
- Get the mount point correctly, if the device has several mount point
- kdump-lib: Add new function to judge the system is Atomic or not
- kdump-lib: Add the new function to enhance bind mounted judgement
- Remove duplicate slash in save path
- dracut-module-setup.sh: change the insecure use of /tmp/*$$* filenames
- make kdump saving directory name consistent with RHEL6
* Thu Apr 09 2015 Baoquan He <bhe@redhat.com> - 2.0.7-20
- sadump: Support more than 16TB physical memory space.
* Fri Feb 6 2015 Dave Young <dyoung@redhat.com> - 2.0.7-19
- Fix to 2.0.7-18, forgot to update SOURCE25 addon tarball.
* Fri Feb 6 2015 Dave Young <dyoung@redhat.com> - 2.0.7-18
- update addon translations, delete untranslated po files.
* Fri Jan 30 2015 Baoquan He <bhe@redhat.com> - 2.0.7-17
- Just fix a typo in kexec-tools.spec
* Fri Jan 30 2015 Baoquan He <bhe@redhat.com> - 2.0.7-16
- kdumpctl: adjust the boot dir if kernel is put in sub dir of /boot
* Tue Jan 13 2015 WANG Chao <chaowang@redhat.com> - 2.0.7-15
- mount fail if its mount poing doesn't exist in /sysroot
- rebuild initrd dependency during kdump restart
- fix a dump path issue
* Thu Dec 18 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-14
- fix core_collector issue for ssh/raw dump
- remove sysctl.conf for kdump kernel
- exclude aarch64 build
- fix path directive issue
- remove panic_on_warn kernel parameter
* Wed Nov 12 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-13
- Update kdump-anaconda-addon
* Tue Nov 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-12
- Fix ppc64le installation issue
* Tue Oct 28 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-11
- fadump fix
- kdump-anaconda-addon fix
* Mon Sep 29 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-10
- Rebase makedumpfile-1.5.7
- Fix an issue on iscsi boot environment
- Disable kvm CMA reservation in kdump kernel
* Tue Sep 23 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-9
- Enable ppc64le arch.
- add sample eppic scripts to kexec-tools-eppic package
- Restart kdump service on cpu ADD/REMOVE events
* Fri Sep 12 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-8
- use kexec_file_load() syscall when SecureBoot enabled.
- update kdump-anaconda-addon
* Fri Aug 29 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-7
- add kexec-tools-anaconda-addon subpackage
- use absolute path for executable in systemd service.
* Mon Aug 25 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-6
- install udev rules to /usr/lib/
- allow short hostname in cluster configuration
* Wed Aug 06 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-5
- rework of kdump error handling
- ppc: add fadump support
- add static route support
- systemd will take care of shutdown and unmount filesystems
- fix an issue that can't bring up correct network device
* Wed Aug 06 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-4
- ppc64: kexec load fails due to elf symbol relocation failure.
- display a message while waiting for kdump lock
* Tue Jul 22 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-3
- Backport several latest bits from Fedora
- Fix makedumpfile OOM issue
* Fri Jul 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-2
- do not verify mtime of kdump.conf
* Tue Jul 01 2014 WANG Chao <chaowang@redhat.com> - 2.0.7-1
- Rebase kexec-tools-2.0.7
- Rebase makedumpfile-1.5.6
* Tue Jun 10 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-33
- support fence_kdump for generic cluster
- handle static ip fix
- stop passing "nofail" mount option to 2nd kernel
* Wed Apr 30 2014 Madper Xie <cxie@redhat.com> - 2.0.4-32
- spec: fix wrong source id
* Wed Apr 30 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-31
- generate kdump service dependencies on the fly
* Wed Mar 26 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-30
- fix issue when dump path is mounted on nfs.
* Tue Mar 18 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-29
- vmcore-dmesg: stack smashing fix
- get_ssh_size fix for localized df output
* Mon Mar 10 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-28
- Document supported/unsupported/unknown list of dump targets
- Warn user about save vmcore path mounted by another disk
* Tue Mar 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-27
- mkdumprd: call dracut with --hostonly-cmdline (dracut >= 033-145)
- warning on secure boot enabled platform
* Tue Mar 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-26
- Regression fix on wdt kernel module install
* Mon Mar 03 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-25
- kdumpctl: Pass disable_cpu_apicid to kexec of capture kernel
- Relax restriction of dumping on encrypted target
- ssh dump: create random-seed manually
* Mon Feb 17 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-24
- remove selinux flipping when propagating ssh key
- add kdump-in-cluster-environment.txt to rpm pkg
- Secure Boot status check warning
- Some watchdog driver support
* Wed Jan 29 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-23
- Add acpi_no_memhotplug to kdump kernel
- Add fence kdump support
* Fri Jan 24 2014 Daniel Mach <dmach@redhat.com> - 2.0.4-22
- Mass rebuild 2014-01-24
* Wed Jan 22 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-21
- makedumpfile: Improve progress information for huge memory system
- s390: use nr_cpus=1 instead of maxcpus=1
* Fri Jan 17 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-20
- vmcore-dmesg: fix timestamp error in vmcore-dmesg.txt
- makedumpfile: re-enable mmap() and introduce --non-mmap
- kdump.conf uncomment default core_collector line
- fix an issue when 'ssh' directive appearing in kdump.conf, the rest part of
lines in this file are ignored
* Fri Dec 27 2013 Daniel Mach <dmach@redhat.com> - 2.0.4-19
- Mass rebuild 2013-12-27
* Tue Dec 24 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-18
- kexec-tools.spec: only install makedumpfile.conf on ix86 x86_64 ppc64 s390x
* Tue Dec 24 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-17
- kexec-tools.spec: remove /etc/kdump-adv-conf/
* Tue Dec 24 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-16
- update translation files
* Tue Dec 17 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-15
- makedumpfile: default to lzo compression
- makedumpfile: add makedumpfile.conf.sample and its manpage
* Tue Dec 03 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-14
- Add rd.memdebug in kdump module
- kdumpctl: Avoid leaking fd to subshell
- makedumpfile: Understand >= v3.11-rc4 dmesg
- makedumpfile, ppc: Support to filter dump for kernels that use CONFIG_SPARSEMEM_VMEMMAP.
* Fri Nov 15 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-13
- makedumpfile: disable mmap()
* Tue Oct 29 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-12
- fix sadump format phys_base calculating error
- kdump, x86: Process multiple Crash kernel in /proc/iomem
- makedumpfile: wrong cyclic buffer size recalculation causes bitmap data corruption
- Fix max_mapnr issue on system has over 44-bit addressing.
* Sat Oct 12 2013 Baoquan He <bhe@redhat.com> -2.0.4-11
- kdump-lib.sh: strip_comments is not implemented correcty
* Fri Sep 27 2013 Baoquan He <bhe@redhat.com> - 2.0.4-10
- Back port 2 revert commits
- kdump.sysconfig: default to "nofail" mount
* Fri Sep 27 2013 Baoquan He <bhe@redhat.com> - 2.0.4-9
- Strip inline comments from the kdump config file before use
- kdump-lib.sh: add common function strip_comments
- Introduce kdump-lib.sh for kdump shared functions
- kdump.service: Start kdump after network is online and remote fs is mounted
- dracut-module-setup: _dev to be a local variable
- kdumpctl: Run multiple kdumpctl instances one by one in serial order
* Wed Aug 21 2013 Baoquan He <bhe@redhat.com> - 2.0.4-8
- remove 98selinux dependency
* Fri Aug 2 2013 Baoquan He <bhe@redhat.com> - 2.0.4-7
- dracut-kdump.sh: add do_dump() and error out if dump vmcore fails
- dracut-module-setup.sh: setup correct system time and time zone in 2nd kernel.
- kernel cmdline: Remove hugepage allocations
- Use /lib/dracut/no-emergency-shell to control action on fail
- Revert: kdump.sysconfig: Add option action_on_fail and set its default as continue
- dracut-kdump.sh: Redirect kdump script stdout/stderr to /dev/console
- add snappy build
* Fri Jul 12 2013 Baoquan He <bhe@redhat.com> - 2.0.4-6
- add lzo build
- makedumpfile: Add vmap_area_list definition for ppc/ppc64.
- pull makedumpfile-1.5.4
- mkdumprd: check return value of subshell
- mkdumprd: get_persistent_dev() return original dev if no persistent dev exists.
- dracut-kdump.sh: Merge dump_to_rootfs() to dump_fs()
- dracut-kdump.sh: explicitly sync after each dump
- Correct wrong weekday of changelog
- kexec-tools.spec: Remove incorrect description in changelog
* Tue Jun 25 2013 Baoquan He <bhe@redhat.com> - 2.0.4-5
- monitor-dd-progress fix
- rawdump: only show dd progress bar when core_collector is not makedumpfile
- kexec-tools.spec: replaces scriptlets with new systemd macros
- dracut-kdump.sh: umount fs right before kdump exit
- dracut-kdump.sh: recursively umount fs and its submounts
- dracut-kdump.sh: cleanup - using local variable names instead of $1/$2 in functions
- dracut-kdump.sh: name the invalid vmcore to vmcore-incomplete
- dracut-kdump.sh: Output top level information about the kdump progress.
- kexec-kdump-howto: Add a section for debugging tips
* Tue Jun 18 2013 Baoquan He <bhe@redhat.com> - 2.0.4-4
- dracut-module-setup.sh: improve the approach to get a bridged interface list
- dracut-module-setup.sh: cleanup - use kdump_get_mac_addr() function
- dracut-module-setup.sh: use kernel exported mac address in kdump_get_mac_addr()
- dracut-module-setup.sh: use perm addr of slaves to setup bonding network
- kdump: Do not output debug messages by default
- dracut-module-setup.sh: kdump module depends on drm module
- mkdumprd: return error if no write permission on save path of server for ssh
* Thu Jun 13 2013 Baoquan He <bhe@redhat.com> - 2.0.4-3
- mkdumprd: remove -M option for dracut
- kdumpctl: add selinux relabel when service startup
- depends on dracut selinux module
- dracut-kdump.sh: umount rootfs after dump_to_rootfs
- kdump.sysconfig: append "panic=10" to kdump cmdline
- kexec-kdump-howto: grubby is suggested modifing kernel cmdline
- kexec-tools.spec: removes kexec udev rules for s390
- kdump.sysconfig: Add option action_on_fail and set its default as continue
- Add tab key as delimiter for core_collector in kdump.conf
- redirect stdout to stderr
* Tue May 14 2013 Baoquan He <bhe@redhat.com> - 2.0.4-2
- kdump: Save vmcore-dmesg.txt before saving vmcore
- Remove "ip=" overwrite to 40ip.conf
- Add support for bridge over bond/team/vlan.
- Fix bonding options syntax and get all specified options from ifcfg file.
- add dracut_args option to kdump.conf
- kexec-tools.spec: Add ethtool to dependency.
- error out if dump target is encrypted
* Wed Apr 3 2013 Baoquan He <bhe@redhat.com> - 2.0.4-1
- Delete several patches which have been merged into kexec-tools-2.0.4
- Revert: Release 2.0.3-72
- Release 2.0.3-72
- Pull kexec-tools-2.0.4
- Check if block device as dump target is resettable
- mkdumprd: add function perror_exit
- Deprecate blacklist option
* Wed Mar 27 2013 Baoquan He <bhe@redhat.com> - 2.0.3-71
- Remove eppic support on ppc and s390 arch
* Mon Mar 18 2013 Baoquan He <bhe@redhat.com> - 2.0.3-70
- Change rules related to eppic in kexec-tools.spec
* Thu Mar 14 2013 Baoquan He <bhe@redhat.com> - 2.0.3-69
- Support for eppic language as a subpackage
* Thu Mar 14 2013 Baoquan He <bhe@redhat.com> - 2.0.3-68
- tune sysconfig to save memory usage
- Remove useless codes related to LOGGER in kdumpctl
- kdumpctl:print out the service status
- Return to start() function when check_ssh_target failed
- use findmnt instead of blkid in mkdumprd
- check dump target mounting earlier
- kdumpctl: rename function name check_config
- add function to check kdump config file
- dracut-module-setup.sh: remove UUID/LABEL quotes before using it
- Change dump_to_rootfs to be a default option and reboot to be default action
- Remove "-F" in CORE_COLLECTOR when dump_to_rootfs
* Tue Feb 19 2013 Baoquan He <bhe@redhat.com> - 2.0.3-67
- Remove comma which is redundant
- Modify codes related to dump dir to make it clearer
- Rectify the get_host_ip implementation
- Revert: Merge an upstream patch for fix a ppc64 makedumpfile bug with with CONFIG_SPARSEMEM_EXTREME
- pull makedumpfile 1.5.3
* Tue Feb 5 2013 Dave Young <ruyang@redhat.com> - 2.0.3-66
- Spec: remove kdump image when a corresponding kernel is removed
- Merge an upstream patch for fix a ppc64 makedumpfile bug
* Mon Jan 28 2013 Dave Young <ruyang@redhat.com> - 2.0.3-65
- Add support for team devices
- Update translation file po/it.po
- remove wait for net ok function
- add bootdev cmdline param
- kdumpnic cmdline file name cleanup
* Fri Jan 4 2013 Dave Young <ruyang@redhat.com> - 2.0.3-64
- fix issue of exec on stack for ppc32
* Fri Dec 21 2012 Dave Young <ruyang@redhat.com> - 2.0.3-63
- revert explictly handling of PIPESTATUS
- enable pipefail bash option
- wrong ssh key fix
- build fix: Update 3 po files: po/gu.po po/or.po po/zh_CN.po
* Fri Dec 21 2012 Dave Young <ruyang@redhat.com> - 2.0.3-62
- Pull translated po files from zanata
- Optimize redundent code fetching server of network dump
- change the dump dir format to be more readable
* Wed Dec 12 2012 Dave Young <ruyang@redhat.com> - 2.0.3-61
- firstboot:fix reserve mem ui spinbox step size
- handle readonly mounted filesystem
* Mon Dec 10 2012 Dave Young <ruyang@redhat.com> - 2.0.3-60
- makedumpfile 1.5.1
- Update po tar.gz
- Add a notes for zanata process
- Add two xmls file for po zanata translation
- Cleanup and recreate po files
* Fri Nov 16 2012 Dave Young <ruyang@redhat.com> - 2.0.3-59
- Enable kdump service after installation
- get MEM_RESERVED from sysfs attribute
- get_ssh_size: use -n to redirect stdin from /dev/null
- add random feeding code for ssh dump
- kdump option space checking improvement
- kdumpctl: multi dump target checking fix
* Thu Oct 25 2012 Dave Young <ruyang@redhat.com> - 2.0.3-58
- pull in two upstream patches
* Thu Oct 11 2012 Dave Young <ruyang@redhat.com> - 2.0.3-57
- improve persistent name handling
* Sat Sep 29 2012 Dave Young <ruyang@redhat.com> - 2.0.3-56
- Pull vmcore-dmesg patches from vivek
- ppc/ppc64: compile purgatory with gcc option msoft-float
- Update to support f18 grub2 efi config file
- pass persistent name to dracut --device
- pass persistent name to dracut --mount
- use persistent name in kdump.conf of initramfs
- mkdumprd: add function get_persistent_dev
- remove useless uuid and label handling
* Thu Sep 06 2012 Dave Young <ruyang@redhat.com> - 2.0.3-55
- doc fix for mount dump target before mkdumprd
- pull makedumpfile 1.5.0
* Wed Aug 29 2012 Dave Young <ruyang@redhat.com> - 2.0.3-54
- pass raw device as dracut argument
- iscsi setup fix
- firstboot: add automatic and manual memory reservation for rhel
- firstboot: remove unnecessary underline shortkey
- firstboot: fix gtk warning about non-zero page size
- firstboot: update all kernels config in grubbyCmd
- firstboot: add actual reserved memory widget
- firstboot code cleanup
- rhcrashkernel-param: echo crashkernel=auto for rhel7
- Remove the kernel-kdump handling
- s390x firstboot fix
- remove elilo support
- grub2 fix in firstboot
- Take closing the reboot dialog as no
- Handle new crashkernel= syntax in firstboot
- Fix a localized string in firstboot
- Configure kdump in firstboot
- fix firstboot to ensure kdump svc is disabled properly
- firstboot text domain fix
- Update to use systemctl instead of sysv chkconfig
- port force_rebuild kdump.conf option
- Change return value to indicate the result of dump_raw() correctly.
- call dracut function for default shell
* Mon Jul 23 2012 Dave Young <ruyang@redhat.com> - 2.0.3-53
- refactor net option
- use fstab-sys to mount nfs
- rename function dump_localfs
- dump_localfs error path fix
- update kexec-kdump-howto.txt about systemctl commands
- ssh propagate alert message fix
- remove useless dracut cmdline '-c /dev/null'
- remove useless dracut cmdline for kernel-modules and kdumpbase
- install core_collector in module-setup.sh
- install extra_bins in module-setup.sh
- remove busybox dependency
- improve warning message of space checking
- do not mount root twice
- do not add fstab-sys module in dracut cmdline
- omit dash module
- network dns config fix
- shell exit value fix
* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.3-52
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Thu Jul 5 2012 Dave Young <ruyang@redhat.com> - 2.0.3-51
- add s390x netdev setup
- Add s390x support
- Cleanup temp file leaved at /tmp/
- add check_size function for fs dump
- add ssh check_size
- blacklist patch apply fix
- Respect bonding mode
- Support dump over vlan tagged bonding
* Fri Jun 22 2012 Dave Young <ruyang@redhat.com> - 2.0.3-50
- add blacklist option, Resolves: bz805774
- Add kdump_post and kdump_pre support, Resolves: bz805773
- Port check_config from rhel6, Resolves: bz805778
- raw core_collector fix
- ssh core_collector fix
- drcut-kdump.sh: cleanup kdump.conf check
* Tue Jun 12 2012 Dave Young <ruyang@redhat.com> - 2.0.3-49
- cleanup DUMP_INSTRUCTION handling
- final reboot behavior fix
- dump_rootfs for default target fix
- add vlan support
- fix and refactor bond handling code
- fix and refactor bridge handling code
- core_collector doc basic fix
- omit plymouth module, Resolves: bz821997
- mkdumprd manpage cleanup manpage
- mkdumprd: remove --debug
- mkdumprd: remove noconf
- makedumprd: remove -d
- kdump.conf add sshkey
- kdump.conf remove disk_timeout
- kdump.conf make path uncommented
- kdump.conf.5 add default poweroff
- kdump.conf default shell fix
- kdump.conf default default action fix
- kdump.conf.5 remove module option
- kdump.conf remove kdump_pre/kdump_post
- kdump.conf: remove link_delay
* Mon May 28 2012 Dave Young <ruyang@redhat.com> - 2.0.3-48
- do_default_action cleanup, Resolves: bz805773
- add rhcrashkernel-param for anaconda use, Resolves: bz707441
- Basic iscsi target dump support (software initiator), Resolves bz822701
- Static ip configuratio support, Resolves: bz822739
- udev rules fix, Resolves: bz808817
* Thu May 3 2012 Dave Young <ruyang@redhat.com> - 2.0.3-47
- remove dracut-files.tgz2
* Wed May 2 2012 Dave Young <ruyang@redhat.com> - 2.0.3-46
- mkdumprd: Start using --hostonly and --add kdumpbase while calling dracut
- get_mp function cleanup
- move kdump script order to the end of pre pivot
- port raw dump from rhel6
- remove multi dump
* Mon Apr 23 2012 Dave Young <ruyang@redhat.com> - 2.0.3-45
- update dracut-files.tbz2
* Thu Apr 19 2012 Dave Young <dyoung@redhat.com> - 2.0.3-44
- update ppc64 sysconfig, resolve bug 811449
- deal with nic rename issue, resolve bug 810107
- update x86_64 sysconfig, resolve bug 813711
* Wed Apr 11 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-43
- variable name fix from Dave Young.
* Fri Mar 30 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-42
- get ip addr with getent
- spec: depends on dracut-network
- Handle net option for nfs in kdump.conf correctly
* Mon Feb 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-41
- Bump this version.
* Wed Feb 22 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-40
- Fixup sysytemd service file.
* Wed Feb 22 2012 Dave Young <ruyang@redhat.com> - 2.0.2-39
- Add ssh dump support, resolve bug 789253.
* Fri Jan 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-38
- Pull the latest makedumpfile release, 1.4.2.
* Fri Jan 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-37
- Add initial NFS dump support, experimental.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-36
- Really upload the dracut module.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-35
- Fix various bugs for nfs dump.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-34
- kdump.sh cleanup for fstab handling, from Dave Young.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-33
- Handle rootfs correctly.
* Tue Jan 10 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-32
- Fix add_dracut_arg in mkdumprd.
* Tue Jan 10 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-31
- Update kdump dracut module with the latest dracut kdump branch.
* Fri Dec 16 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-30
- Update kdump dracut module to use the latest dracut feature.
* Fri Sep 9 2011 Tom Callaway <spot@fedoraproject.org> - 2.0.2-29
- fix systemd scriptlets
* Wed Sep 7 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-28
- Rename mkdumprd2 to mkdumpramfs.
* Wed Aug 31 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-27
- Add debug_mem_level debugging option, from Jan Stancek.
Resolve Bug 731395.
* Mon Aug 15 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-26
- Fix several issues caused by the previous revert.
* Mon Aug 15 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-25
- Switch back to old mkdumprd and also keep the new one.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-24
- Fix default action handling.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-23
- Install modified kdump.conf in initrd.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-22
- Handle lvm in pre-pivot hook.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-21
- Fix udev rules in module-setup.sh
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-20
- Generate udev rules in module-setup.sh
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-19
- Generate udev rules to handle device names.
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-18
- Fix dump to local filesystem and raw dump.
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-17
- Depend on dracut-network.
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-16
- Move dracut module detection code to module-setup.sh.
* Thu Jul 28 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-15
- Use shutdown module of dracut to handle reboot/shutdown/halt.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-14
- Wait for loginit.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-13
- Use absolute path of reboot/halt/poweroff.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-12
- Don't use consolehelper, use real reboot/halt/poweroff.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-11
- Rename initrd to initramfs.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-10
- Don't depend on busybox, as it doesn't save much space.
* Tue Jul 26 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-9
- Parse default action.
* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-8
- Move path/core_collector/default parsing code to initrd.
* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-7
- Remove obsolete code in kdumpctl.
* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-6
- Support core_collector and extran_bins.
* Thu Jul 21 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-5
- Bypass '-d' option.
* Thu Jul 21 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-4
- Update initramfs infrastructure to make it working
with dracut.
* Wed Jul 06 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-3
- Removed sysv init script from package
* Mon Jul 04 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-2
- Added systemd unit file (bz 716994)
* Fri Jun 24 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-1
- Updated to upstream version 2.0.2
* Thu Jun 02 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-47
- Fixed misuse of readlink command after directory change (bz 710744)
* Tue Apr 26 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-46
- Fix some grammer in man page (bz 673817)
* Mon Mar 28 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-45
- Fix misuse of basename in mkdumprd (bz 683769)
* Thu Mar 10 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-44
- Fix build break in purgatory makefile
* Thu Mar 10 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-43
- Remove vestigual emitdms code and call from mkdumprd
* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-42
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
* Fri Oct 22 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-41
- Fixed dhcp retry mechanism (bz 645734)
* Wed Sep 29 2010 jkeating - 2.0.0-40
- Rebuilt for gcc bug 634757
* Wed Sep 22 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-39
- fix finding modalias/mkdumprd hang (bz 635893)
* Wed Aug 11 2010 David Malcolm <dmalcolm@redhat.com> - 2.0.0-38
- recompiling .py files against Python 2.7 (rhbz#623327)
* Sun Jun 13 2010 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-37
- Fix a syntax error in kdump init script
* Sun Jun 13 2010 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-36
- Cosmetic mkdumprd fixes (drop an unused function, streamline another)
* Sat May 29 2010 CAI Qian <caiqian@redhat.com> - 2.0.0-35
- Forward-port from F13
- Fixed kernel text area search in kcore (bz 587750)
* Sat May 29 2010 CAI Qian <caiqian@redhat.com> - 2.0.0-34
- Massive forward-port from RHEL6
- Update kexec-kdump-howto.txt
- Update docs to reflect use of ext4
- Update mkdumprd to pull in all modules needed
- Fix mkdumprd typo
- Removed universal add of ata_piix from mkdumprd
- Fix infinite loop from modprobe changes
- Fixed kexec-kdump-howto.doc for RHEL6
- Update makedumpfile to 1.3.5
- Improved mkdumprd run time
- Cai's fix for broken regex
- Fixing crashkernel syntax parsing
- Fix initscript to return proper LSB return codes
- Fixed bad call to resolve_dm_name
- Added poweroff option to mkdumprd
- Fixed readlink issue
- Fixed x86_64 page_offset specifictaion
- Fixed lvm setup loop to not hang
- Added utsname support to makedumpfile for 2.6.32
- Fix critical_disks list to exclude cciss/md
- Add help info for -b option
- Add ability to handle firmware hotplug events
- Update mkdumprd to deal with changes in busybox fsck
- Vitaly's fix to detect need for 64 bit elf
- Fix major/minor numbers on /dev/rtc
- Fix ssh id propogation w/ selinux
- Add blacklist feature to kdump.conf
- Removed rhpl code from firstboot
- Fixed firstboot enable sense
- Remove bogus debug comment from mkdumprd.
- Handle SPARSEMEM properly
- Fix scp monitoring script
- Fix firstboot to find grub on EFI systems
- Fixed mkdumprd to remove dup insmod
- Fixed kdump fsck pause
- Fixed kdump option handling
- fixed raid5 module detection
* Thu Mar 11 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-33
- Remove nash references from mkdumprd
* Wed Feb 17 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-32
- Fixed spec file error
* Wed Feb 17 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-31
- Adding kdump.conf man page
- Adding disk timeout parameter (bz 566135)
* Tue Dec 01 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-30
- Fix raid support in mkdumprd (bz 519767)
* Mon Nov 23 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-29
- Updating firstboot script to RHEL-6 version (bz 539812)
* Fri Nov 06 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-28
- Added abrt infrastructure to kdump init script (bz 533370)
* Tue Sep 15 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-27
- Fixing permissions on dracut module files
* Fri Sep 11 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-26
- Rebuild for translation team (bz 522415)
* Thu Sep 10 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-25
- Fix dracut module check file (bz 522486)
* Thu Aug 13 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-24
- update kdump adv conf init script & dracut module
* Wed Jul 29 2009 Neil Horman <nhorman@redhat.com> - 2.0,0-23
- Remove mkdumprd2 and start replacement with dracut
* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-22
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-21
- Fixed build break
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-20
- Make makedumpfile a dynamic binary
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-19
- Fix build issue
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-18
- Updated initscript to use mkdumprd2 if manifest is present
- Updated spec to require dash
- Updated sample manifest to point to correct initscript
- Updated populate_std_files helper to fix sh symlink
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-17
- Fixed mkdumprd2 tarball creation
* Tue Jun 23 2009 Neil Horman <nhorman@redhat.com> 2.0.0-16
- Fix up kdump so it works with latest firstboot
* Mon Jun 15 2009 Neil Horman <nhorman@redhat.com> 2.0.0-15
- Fixed some stat drive detect bugs by E. Biederman (bz505701)
* Wed May 20 2009 Neil Horman <nhorman@redhat.com> 2.0.0-14
- Put early copy of mkdumprd2 out in the wild (bz 466392)
* Fri May 08 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-13
- Update makedumpfile to v 1.3.3 (bz 499849)
* Tue Apr 07 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-12
- Simplifed rootfs mounting code in mkdumprd (bz 494416)
* Sun Apr 05 2009 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-11
- Install the correct configuration for i586
* Fri Apr 03 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-10
- Fix problem with quoted CORE_COLLECTOR string (bz 493707)
* Thu Apr 02 2009 Orion Poplawski <orion@cora.nwra.com> - 2.0.0-9
- Add BR glibc-static
* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
* Thu Dec 04 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.0.0-7
- Rebuild for Python 2.6
* Mon Dec 01 2008 Neil Horman <nhorman@redhat.com> - 2.0.0.6
- adding makedumpfile man page updates (bz 473212)
* Mon Dec 01 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.0.0-5
- Rebuild for Python 2.6
* Wed Nov 05 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-3
- Correct source file to use proper lang package (bz 335191)
* Wed Oct 29 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-2
- Fix mkdumprd typo (bz 469001)
* Mon Sep 15 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-2
- Fix sysconfig files to not specify --args-linux on x86 (bz 461615)
* Wed Aug 27 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-1
- Update kexec-tools to latest upstream version
* Wed Aug 27 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-16
- Fix mkdumprd to properly use UUID/LABEL search (bz 455998)
* Tue Aug 5 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 1.102pre-15
- fix license tag
* Mon Jul 28 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-14
- Add video reset section to docs (bz 456572)
* Fri Jul 11 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-13
- Fix mkdumprd to support dynamic busybox (bz 443878)
* Wed Jun 11 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-12
- Added lvm to bin list (bz 443878)
* Thu Jun 05 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-11
- Update to latest makedumpfile from upstream
- Mass import of RHEL fixes missing in rawhide
* Thu Apr 24 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-10
- Fix mkdumprd to properly pull in libs for lvm/mdadm (bz 443878)
* Wed Apr 16 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-9
- Fix cmdline length issue
* Tue Mar 25 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-8
- Fixing ARCH definition for bz 438661
* Mon Mar 24 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-7
- Adding patches for bz 438661
* Fri Feb 22 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-6
- Bringing rawhide up to date with bugfixes from RHEL5
- Adding patch to prevent kexec buffer overflow on ppc (bz 428684)
* Tue Feb 19 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-5
- Modifying mkdumprd to include dynamic executibles (bz 433350)
* Tue Feb 12 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-4
- bumping rev number for rebuild
* Wed Jan 02 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-3
- Fix ARCH placement in kdump init script (bz 427201)
- Fix BuildRequires
- Fix Makedumpfile to build with new libelf
* Mon Oct 01 2007 Neil Horman <nhorman@redhat.com> - 1.102pre-2
- Fix triggerpostun script (bz 308151)
* Thu Aug 30 2007 Neil Horman <nhorman@redhat.com> - 1.102pre-1
- Bumping kexec version to latest horms tree (bz 257201)
- Adding trigger to remove initrds when a kernel is removed
* Wed Aug 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-81
- Add xen-syms patch to makedumpfile (bz 250341)
* Wed Aug 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-80
- Fix ability to determine space on nfs shares (bz 252170)
* Tue Aug 21 2007 Neil Horman <nhorman@redhat.com> - 1.101-79
- Update kdump.init to always create sparse files (bz 253714)
* Fri Aug 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-78
- Update init script to handle xen kernel cmdlnes (bz 250803)
* Wed Aug 01 2007 Neil Horman <nhorman@redhat.com> - 1.101-77
- Update mkdumprd to suppres notifications /rev makedumpfile (bz 250341)
* Thu Jul 19 2007 Neil Horman <nhorman@redhat.com> - 1.101-76
- Fix mkdumprd to suppress informative messages (bz 248797)
* Wed Jul 18 2007 Neil Horman <nhorman@redhat.com> - 1.101-75
- Updated fr.po translations (bz 248287)
* Tue Jul 17 2007 Neil Horman <nhorman@redhat.com> - 1.101-74
- Fix up add_buff to retry locate_hole on segment overlap (bz 247989)
* Mon Jul 09 2007 Neil Horman <nhorman@redhat.com> - 1.101-73
- Fix up language files for kexec (bz 246508)
* Thu Jul 05 2007 Neil Horman <nhorman@redhat.com> - 1.101-72
- Fixing up initscript for LSB (bz 246967)
* Tue Jun 19 2007 Neil Horman <nhorman@redhat.com> - 1.101-71
- Fixed conflict in mkdumprd in use of /mnt (bz 222911)
* Mon Jun 18 2007 Neil Horman <nhorman@redhat.com> - 1.101-70
- Fixed kdump.init to properly read cmdline (bz 244649)
* Wed Apr 11 2007 Neil Horman <nhorman@redhat.com> - 1.101-69
- Fixed up kdump.init to enforce mode 600 on authorized_keys2 (bz 235986)
* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-68
- Fix alignment of bootargs and device-tree structures on ppc64
* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-67
- Allow ppc to boot ppc64 kernels (bz 235608)
* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-66
- Reduce rmo_top to 0x7c000000 for PS3 (bz 235030)
* Mon Mar 26 2007 Neil Horman <nhorman@redhat.com> - 1.101-65
- Fix spec to own kexec_tools directory (bz 219035)
* Wed Mar 21 2007 Neil Horman <nhorman@redhat.com> - 1.101-64
- Add fix for ppc memory region computation (bz 233312)
* Thu Mar 15 2007 Neil Horman <nhorman@redhat.com> - 1.101-63
- Adding extra check to avoid oom kills on nfs mount failure (bz 215056)
* Tue Mar 06 2007 Neil Horman <nhorman@redhat.com> - 1.101-62
- Updating makedumpfile to version 1.1.1 (bz 2223743)
* Thu Feb 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-61
- Adding multilanguage infrastructure to firstboot_kdump (bz 223175)
* Mon Feb 12 2007 Neil Horman <nhorman@redhat.com> - 1.101-60
- Fixing up file permissions on kdump.conf (bz 228137)
* Fri Feb 09 2007 Neil Horman <nhorman@redhat.com> - 1.101-59
- Adding mkdumprd man page to build
* Thu Jan 25 2007 Neil Horman <nhorman@redhat.com> - 1.101-58
- Updating kdump.init and mkdumprd with most recent RHEL5 fixes
- Fixing BuildReq to require elfutils-devel-static
* Thu Jan 04 2007 Neil Horman <nhorman@redhat.com> - 1.101-56
- Fix option parsing problem for bzImage files (bz 221272)
* Fri Dec 15 2006 Neil Horman <nhorman@redhat.com> - 1.101-55
- Wholesale update of RHEL5 revisions 55-147
* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-54
- integrate default elf format patch
* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-53
- Taking Viveks x86_64 crashdump patch (rcv. via email)
* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-52
- Taking ia64 tools patch for bz 181358
* Mon Aug 28 2006 Neil Horman <nhorman@redhat.com> - 1.101-51
- more doc updates
- added patch to fix build break from kernel headers change
* Thu Aug 24 2006 Neil Horman <nhorman@redhat.com> - 1.101-50
- repo patch to enable support for relocatable kernels.
* Thu Aug 24 2006 Neil Horman <nhorman@redhat.com> - 1.101-49
- rewriting kcp to properly do ssh and scp
- updating mkdumprd to use new kcp syntax
* Wed Aug 23 2006 Neil Horman <nhorman@redhat.com> - 1.101-48
- Bumping revision number
* Tue Aug 22 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-47
- ppc64 no-more-platform fix
* Mon Aug 21 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-46
- ppc64 fixups:
- actually build ppc64 binaries (bug 203407)
- correct usage output
- avoid segfault in command-line parsing
- install kexec man page
- use regulation Fedora BuildRoot
* Fri Aug 18 2006 Neil Horman <nhorman@redhat.com> - 1.101-45
- fixed typo in mkdumprd for bz 202983
- fixed typo in mkdumprd for bz 203053
- clarified docs in kdump.conf with examples per bz 203015
* Tue Aug 15 2006 Neil Horman <nhorman@redhat.com> - 1.101-44
- updated init script to implement status function/scrub err messages
* Wed Aug 09 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-43
- Misc spec cleanups and macro-ifications
* Wed Aug 09 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-42
- Add %dir /var/crash, so default kdump setup works
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-41
- fix another silly makefile error for makedumpfile
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-40
- exclude makedumpfile from build on non-x86[_64] arches
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-39
- exclude makedumpfile from build on non-x86[_64] arches
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-38
- updating makedumpfile makefile to use pkg-config on glib-2.0
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-37
- updating makedumpfile makefile to use pkg-config
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-36
- Removing unneeded deps after Makefile fixup for makedumpfile
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-35
- fixing up FC6/RHEL5 BuildRequires line to build in brew
* Wed Aug 02 2006 Neil Horman <nhorman@redhat.com> - 1.101-34
- enabling makedumpfile in build
* Wed Aug 02 2006 Neil Horman <nhorman@redhat.com> - 1.101-33
- added makedumpfile source to package
* Mon Jul 31 2006 Neil Horman <nhorman@redhat.com> - 1.101-32
- added et-dyn patch to allow loading of relocatable kernels
* Thu Jul 27 2006 Neil Horman <nhorman@redhat.com> - 1.101-30
- fixing up missing patch to kdump.init
* Wed Jul 19 2006 Neil Horman <nhorman@redhat.com> - 1.101-30
- add kexec frontend (bz 197695)
* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.101-29
- rebuild
* Fri Jul 07 2006 Neil Horman <nhorman@redhat.com> 1.101-27.fc6
- Buildrequire zlib-devel
* Thu Jun 22 2006 Neil Horman <nhorman@redhat.com> -1.101-19
- Bumping rev number
* Thu Jun 22 2006 Neil Horman <nhorman@redhat.com> -1.101-17
- Add patch to allow ppc64 to ignore args-linux option
* Wed Mar 08 2006 Bill Nottingham <notting@redhat.com> - 1.101-16
- fix scriptlet - call chkconfig --add, change the default in the
script itself (#183633)
* Wed Mar 08 2006 Thomas Graf <tgraf@redhat.com> - 1.101-15
- Don't add kdump service by default, let the user manually add it to
avoid everyone seeing a warning.
* Tue Mar 07 2006 Thomas Graf <tgraf@redhat.com> - 1.101-14
- Fix kdump.init to call kexec from its new location
* Mon Mar 6 2006 Jeremy Katz <katzj@redhat.com> - 1.101-13
- proper requires for scriptlets
* Mon Mar 06 2006 Thomas Graf <tgraf@redhat.com> - 1.101-12
- Move kexec and kdump binaries to /sbin
* Thu Mar 02 2006 Thomas Graf <tgraf@redhat.com> - 1.101-11
- Fix argument order when stopping kexec
* Mon Feb 27 2006 Thomas Graf <tgraf@redhat.com> - 1.101-10
- kdump7.patch
o Remove elf32 core headers support for x86_64
o Fix x86 prepare elf core header routine
o Fix ppc64 kexec -p failure for gcc 4.10
o Fix few warnings for gcc 4.10
o Add the missing --initrd option for ppc64
o Fix ppc64 persistent root device bug
- Remove --elf32-core-headers from default configuration, users
may re-add it via KEXEC_ARGS.
- Remove obsolete KEXEC_HEADERS
* Wed Feb 22 2006 Thomas Graf <tgraf@redhat.com> - 1.101-9
- Remove wrong quotes around --command-line in kdump.init
* Fri Feb 17 2006 Jeff Moyer <jmoyer@redhat.com> - 1.101-8
- Fix the service stop case. It was previously unloading the wrong kernel.
- Implement the "restart" function.
- Add the "irqpoll" option as a default kdump kernel commandline parameter.
- Create a default kernel command line in the sysconfig file upon rpm install.
* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.101-7.1.1
- rebuilt for new gcc4.1 snapshot and glibc changes
* Thu Feb 02 2006 Thomas Graf <tgraf@redhat.com> - 1.101-7.1
- Add patch to enable the kdump binary for x86_64
* Wed Feb 01 2006 Thomas Graf <tgraf@redhat.com>
- New kdump patch to support s390 arch + various fixes
- Include kdump in x86_64 builds
* Mon Jan 30 2006 Thomas Graf <tgraf@redhat.com>
- New kdump patch to support x86_64 userspace
* Fri Dec 16 2005 Jesse Keating <jkeating@redhat.com>
- rebuilt for new gcj
* Wed Nov 16 2005 Thomas Graf <tgraf@redhat.com> - 1.101-5
- Report missing kdump kernel image as warning
* Thu Nov 3 2005 Jeff Moyer <jmoyer@redhat.com> - 1.101-4
- Build for x86_64 as well. Kdump support doesn't work there, but users
should be able to use kexec.
* Fri Sep 23 2005 Jeff Moyer <jmoyer@redhat.com> - 1.101-3
- Add a kdump sysconfig file and init script
- Spec file additions for pre/post install/uninstall
* Thu Aug 25 2005 Jeff Moyer <jmoyer@redhat.com>
- Initial prototype for RH/FC5