%global eppic_ver e8844d3793471163ae4a56d8f95897be9e5bd554

%global eppic_shortver %(c=%{eppic_ver}; echo ${c:0:7})

%global mkdf_ver 1.7.4

%global mkdf_shortver %(c=%{mkdf_ver}; echo ${c:0:7})

Name: kexec-tools

Version: 2.0.27

Release: 18%{?dist}

License: GPLv2

Summary: The kexec/kdump userspace component

Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.xz

Source1: kdumpctl

Source2: kdump.sysconfig

Source3: kdump.sysconfig.x86_64

Source4: kdump.sysconfig.i386

Source5: kdump.sysconfig.ppc64

Source7: mkdumprd

Source8: gen-kdump-conf.sh

Source9: https://github.com/makedumpfile/makedumpfile/archive/%{mkdf_ver}/makedumpfile-%{mkdf_shortver}.tar.gz

Source10: kexec-kdump-howto.txt

Source11: fadump-howto.txt

Source12: mkdumprd.8

Source13: 98-kexec.rules

Source14: 98-kexec.rules.ppc64

Source15: kdump.conf.5

Source16: kdump.service

Source18: kdump.sysconfig.s390x

Source19: https://github.com/lucchouina/eppic/archive/%{eppic_ver}/eppic-%{eppic_shortver}.tar.gz

Source20: kdump-lib.sh

Source21: kdump-in-cluster-environment.txt

Source22: kdump-dep-generator.sh

Source23: kdump-lib-initramfs.sh

Source24: kdump.sysconfig.ppc64le

Source25: kdumpctl.8

Source26: live-image-kdump-howto.txt

Source27: early-kdump-howto.txt

Source28: kdump-udev-throttler

Source29: kdump.sysconfig.aarch64

Source30: 60-kdump.install

Source31: kdump-logger.sh

Source32: mkfadumprd

Source33: 92-crashkernel.install

Source34: crashkernel-howto.txt

Source35: kdump-migrate-action.sh

Source36: kdump-restart.sh

Source37: 60-fadump.install

Source38: supported-kdump-targets.txt

#######################################

# These are sources for mkdumpramfs

# Which is currently in development

#######################################

Source100: dracut-kdump.sh

Source101: dracut-module-setup.sh

Source102: dracut-monitor_dd_progress

Source104: dracut-kdump-emergency.service

Source106: dracut-kdump-capture.service

Source107: dracut-kdump-emergency.target

Source108: dracut-early-kdump.sh

Source109: dracut-early-kdump-module-setup.sh

Source200: dracut-fadump-init-fadump.sh

Source201: dracut-fadump-module-setup.sh

%ifarch ppc64 ppc64le

Requires(post): servicelog

Recommends: keyutils

%endif

Requires(pre): coreutils sed zlib

Requires: dracut >= 050

Requires: dracut-network >= 050

Requires: dracut-squash >= 050

Requires: ethtool

Requires: binutils

Recommends: grubby

Recommends: hostname

BuildRequires: make

BuildRequires: zlib-devel elfutils-devel glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel libzstd-devel

BuildRequires: pkgconfig intltool gettext

BuildRequires: systemd-rpm-macros

BuildRequires: automake autoconf libtool

%ifarch %{ix86} x86_64 ppc64 ppc s390x ppc64le

Obsoletes: diskdumputils netdump kexec-tools-eppic

%endif

%ifnarch s390x

Requires:       systemd-udev%{?_isa}

%endif

#START INSERT

#

# Patches 0 through 100 are meant for x86 kexec-tools enablement

#

#

# Patches 101 through 200 are meant for x86_64 kexec-tools enablement

#

#

# Patches 301 through 400 are meant for ppc64 kexec-tools enablement

#

#

# Patches 401 through 500 are meant for s390 kexec-tools enablement

#

#

# Patches 501 through 600 are meant for ARM kexec-tools enablement

#

#

# Patches 601 onward are generic patches

#

Patch601: kexec-update-manpage-with-explicit-mention-of-clean-.patch

Patch602: kexec_file-add-kexec_file-flag-to-support-debug-prin.patch

%description

kexec-tools provides /sbin/kexec binary that facilitates a new

kernel to boot using the kernel's kexec feature either on a

normal or a panic reboot. This package contains the /sbin/kexec

binary and ancillary utilities that together form the userspace

component of the kernel's kexec feature.

%prep

%setup -q

mkdir -p -m755 kcp

tar -z -x -v -f %{SOURCE9}

tar -z -x -v -f %{SOURCE19}

%patch601 -p1

%patch602 -p1

%ifarch ppc

%define archdef ARCH=ppc

%endif

%build

autoreconf

%configure \

%ifarch ppc64

    --host=powerpc64-redhat-linux-gnu \

    --build=powerpc64-redhat-linux-gnu \

%endif

%ifarch ppc64le

    --host=powerpc64le-redhat-linux-gnu \

    --build=powerpc64le-redhat-linux-gnu \

%endif

    --sbindir=/usr/sbin

rm -f kexec-tools.spec.in

# setup the docs

cp %{SOURCE10} .

cp %{SOURCE11} .

cp %{SOURCE21} .

cp %{SOURCE26} .

cp %{SOURCE27} .

cp %{SOURCE34} .

cp %{SOURCE38} .

# Generate kdump.conf file

%{SOURCE8} %{_target_cpu} > kdump.conf

make

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

make -C eppic-%{eppic_ver}/libeppic

make -C makedumpfile-%{mkdf_ver} LINKTYPE=dynamic USELZO=on USESNAPPY=on USEZSTD=on

make -C makedumpfile-%{mkdf_ver} LDFLAGS="$LDFLAGS -I../eppic-%{eppic_ver}/libeppic -L../eppic-%{eppic_ver}/libeppic" eppic_makedumpfile.so

%endif

%install

mkdir -p -m755 $RPM_BUILD_ROOT/usr/sbin

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/pre.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/post.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/

mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_udevrulesdir}

mkdir -p $RPM_BUILD_ROOT%{_unitdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sharedstatedir}/kdump

install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl

install -m 755 build/sbin/kexec $RPM_BUILD_ROOT/usr/sbin/kexec

install -m 755 build/sbin/vmcore-dmesg $RPM_BUILD_ROOT/usr/sbin/vmcore-dmesg

install -m 644 build/man/man8/kexec.8  $RPM_BUILD_ROOT%{_mandir}/man8/

install -m 644 build/man/man8/vmcore-dmesg.8  $RPM_BUILD_ROOT%{_mandir}/man8/

SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig

install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump

install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/usr/sbin/mkdumprd

install -m 644 kdump.conf $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf

install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8

install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8

install -m 644 %{SOURCE25} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8

install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh

install -m 755 %{SOURCE23} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh

install -m 755 %{SOURCE31} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-logger.sh

%ifarch ppc64 ppc64le

install -m 755 %{SOURCE32} $RPM_BUILD_ROOT/usr/sbin/mkfadumprd

install -m 755 %{SOURCE35} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-migrate-action.sh

install -m 755 %{SOURCE36} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-restart.sh

%endif

%ifnarch s390x

install -m 755 %{SOURCE28} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler

%endif

%ifnarch s390x ppc64 ppc64le

# For s390x the ELF header is created in the kdump kernel and therefore kexec

# udev rules are not required

install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

%endif

%ifarch ppc64 ppc64le

install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

install -m 755 -D %{SOURCE37} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-fadump.install

%endif

install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5

install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service

install -m 755 -D %{SOURCE22} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

install -m 755 -D %{SOURCE30} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-kdump.install

install -m 755 -D %{SOURCE33} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/92-crashkernel.install

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

install -m 755 makedumpfile-%{mkdf_ver}/makedumpfile $RPM_BUILD_ROOT/usr/sbin/makedumpfile

gzip -c makedumpfile-%{mkdf_ver}/makedumpfile.8 > makedumpfile-%{mkdf_ver}/makedumpfile.8.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz

gzip -c makedumpfile-%{mkdf_ver}/makedumpfile.conf.5 > makedumpfile-%{mkdf_ver}/makedumpfile.conf.5.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample

install -m 755 makedumpfile-%{mkdf_ver}/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so

mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

install -m 644 makedumpfile-%{mkdf_ver}/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

%endif

%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')

%define remove_dracut_early_kdump_prefix() %(echo -n %1|sed 's/.*dracut-early-kdump-//g')

%define remove_dracut_fadump_prefix() %(echo -n %1|sed 's/.*dracut-fadump-//g')

# deal with dracut modules

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase

cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}

cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE104}}

cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}}

cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump

cp %{SOURCE108} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

cp %{SOURCE109} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

%ifarch ppc64 ppc64le

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit

cp %{SOURCE200} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}}

cp %{SOURCE201} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}}

%endif

%define dracutlibdir %{_prefix}/lib/dracut

#and move the custom dracut modules to the dracut directory

mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

%post

# Initial installation

%systemd_post kdump.service

touch /etc/kdump.conf

%ifarch ppc64 ppc64le

servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh 2>/dev/null

servicelog_notify --add --command=/usr/lib/kdump/kdump-migrate-action.sh --match='refcode="#MIGRATE" and serviceable=0' --type=EVENT --method=pairs_stdin >/dev/null

%endif

# This portion of the script is temporary.  Its only here

# to fix up broken boxes that require special settings 

# in /etc/sysconfig/kdump.  It will be removed when 

# These systems are fixed.

if [ -d /proc/bus/mckinley ]

then

	# This is for HP zx1 machines

	# They require machvec=dig on the kernel command line

	sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

elif [ -d /proc/sgi_sn ]

then

	# This is for SGI SN boxes

	# They require the --noio option to kexec 

	# since they don't support legacy io

	sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

fi

%postun

%systemd_postun_with_restart kdump.service

%preun

%ifarch ppc64 ppc64le

servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh >/dev/null

%endif

%systemd_preun kdump.service

%triggerin -- kernel-kdump

touch %{_sysconfdir}/kdump.conf

%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump

# List out the initrds here, strip out version nubmers

# and search for corresponding kernel installs, if a kernel

# is not found, remove the corresponding kdump initrd

IMGDIR=/boot

for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null`

do

	KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'`

	if [ ! -e $IMGDIR/vmlinuz-$KDVER ]

	then

		# We have found an initrd with no corresponding kernel

		# so we should be able to remove it

		rm -f $i

	fi

done

%posttrans

# Try to reset kernel crashkernel value to new default value or set up

# crasherkernel value for new install

#

# Note

#  1. Skip ostree systems as they are not supported.

#  2. For Fedora 36 and RHEL9, "[ $1 == 1 ]" in posttrans scriptlet means both install and upgrade;

#     For Fedora > 36, "[ $1 == 1 ]" only means install and "[ $1 == 2 ]" means upgrade

if [ ! -f /run/ostree-booted ] && [ $1 == 1 -o $1 == 2 ]; then

  kdumpctl _reset-crashkernel-after-update

  :

fi

%files

/usr/sbin/kexec

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

/usr/sbin/makedumpfile

%endif

%ifarch ppc64 ppc64le

/usr/sbin/mkfadumprd

%{_prefix}/lib/kernel/install.d/60-fadump.install

%endif

/usr/sbin/mkdumprd

/usr/sbin/vmcore-dmesg

%{_bindir}/*

%{_datadir}/kdump

%{_prefix}/lib/kdump

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_sysconfdir}/makedumpfile.conf.sample

%endif

%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump

%config(noreplace,missingok) %verify(not mtime) %{_sysconfdir}/kdump.conf

%ifnarch s390x

%config %{_udevrulesdir}

%{_udevrulesdir}/../kdump-udev-throttler

%endif

%{dracutlibdir}/modules.d/*

%dir %{_localstatedir}/crash

%dir %{_sysconfdir}/kdump

%dir %{_sysconfdir}/kdump/pre.d

%dir %{_sysconfdir}/kdump/post.d

%dir %{_sharedstatedir}/kdump

%{_mandir}/man8/kdumpctl.8.gz

%{_mandir}/man8/kexec.8.gz

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_mandir}/man8/makedumpfile.8.gz

%endif

%{_mandir}/man8/mkdumprd.8.gz

%{_mandir}/man8/vmcore-dmesg.8.gz

%{_mandir}/man5/*

%{_unitdir}/kdump.service

%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

%{_prefix}/lib/kernel/install.d/60-kdump.install

%{_prefix}/lib/kernel/install.d/92-crashkernel.install

%doc News

%license COPYING

%doc TODO

%doc kexec-kdump-howto.txt

%doc early-kdump-howto.txt

%doc fadump-howto.txt

%doc kdump-in-cluster-environment.txt

%doc live-image-kdump-howto.txt

%doc crashkernel-howto.txt

%doc supported-kdump-targets.txt

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_libdir}/eppic_makedumpfile.so

/usr/share/makedumpfile/

%endif

%changelog

* Mon Oct 21 2024 Tao Liu <ltao@redhat.com> - 2.0.27-18

- Return the correct exit code of rebuild initrd

* Tue Oct 8 2024 Tao Liu <ltao@redhat.com> - 2.0.27-17

- Introduce vmcore creation notification to kdump

* Tue Sep 10 2024 Tao Liu <ltao@redhat.com> - 2.0.27-16

- Revert "lib: Ensure we don't find bind mounts for device target"

* Wed Aug 7 2024 Tao Liu <ltao@redhat.com> - 2.0.27-15

- Support setting up Open vSwitch (Ovs) Bridge network

* Wed Jul 24 2024 Tao Liu <ltao@redhat.com> - 2.0.27-14

- lib: Ensure we don't find bind mounts for device target

- dracut: Disable ostree-prepare-root

* Tue Jul 16 2024 Tao Liu <ltao@redhat.com> - 2.0.27-13

- kdump-lib: Drop 'file' dependency in is_uki

- kdumpctl.8: Add description to reset-crashkernel --reboot

- kdumpctl: Fix misleading message and erratic reboot in reset_crashkernel

- kdumpctl: Drop default kexec '-d' option

* Thu Jun 27 2024 Tao Liu <ltao@redhat.com> - 2.0.27-12

- ppc64le: replace kernel cmdline maxcpu=1 with nr_cpus=1

* Fri May 31 2024 Tao Liu <ltao@redhat.com> - 2.0.27-11

- sysconfig: add pcie_ports compat to KDUMP_COMMANDLINE_APPEND on x86_64

* Tue May 14 2024 Tao Liu <ltao@redhat.com> - 2.0.27-10

- mkdumprd: Fix makedumpfile parameter check.

- Install the driver of physical device for a SR-IOV virtual device

- Try to install PHY and MDIO bus drivers explicitly

* Wed May 08 2024 Tao Liu <ltao@redhat.com> - 2.0.27-9

- kexec_file: add kexec_file flag to support debug printing

* Tue Jan 30 2024 Tao Liu <ltao@redhat.com> - 2.0.27-8

- dracut-module-setup: Skip initrd-cleanup and initrd-parse-etc in kdump

* Wed Jan 3 2024 Tao Liu <ltao@redhat.com> - 2.0.27-7

- Explain the auto_reset_crashkernel option in more details

- Use the same /etc/resolve.conf in kdump initrd if it's managed manually

* Wed Dec 20 2023 Tao Liu <ltao@redhat.com> - 2.0.27-6

- Use the same /etc/resolve.conf in kdump initrd if it's managed manually

* Fri Nov 24 2023 Tao Liu <ltao@redhat.com> - 2.0.27-5

- kdumpctl: Only returns immediately after an error occurs in check_*_modified

* Thu Nov 16 2023 Tao Liu <ltao@redhat.com> - 2.0.27-4

- kdump-lib.sh: add extra 64M to default crashkernel if sme/sev is active

- Allow _crashkernel_add to address larger memory ranges

- kdump-lib: Harden _crashkernel_add

* Wed Nov 8 2023 Tao Liu <ltao@redhat.com> - 2.0.27-3

- Rebase makedumpfile to v1.7.4

- powerpc: update kdumpctl to load kernel signing key for fadump

- powerpc: update kdumpctl to remove deletion of kernel signing key once loaded

* Mon Nov 6 2023 Tao Liu <ltao@redhat.com> - 2.0.27-2

- kexec: update manpage with explicit mention of clean kexec

* Tue Sep 26 2023 Tao Liu <ltao@redhat.com> - 2.0.26-9

- Introduce a function to get reserved memory size

- powerpc: update fadump sysfs node path

- kdumpctl: merge check_current_{kdump,fadump}_status

- kdumpctl: remove unnecessary uses of $?

* Tue Jul 4 2023 Tao Liu <ltao@redhat.com> - 2.0.26-8

- spec: kdump/ppc64: make servicelog_notify silent when there are no errors

* Wed Jun 21 2023 Tao Liu <ltao@redhat.com> - 2.0.26-7

- kdumpctl: Fix temporary directory location

- kdump-lib: Match 64k debug kernel in prepare_kdump_bootinfo()

* Thu Jun 15 2023 Tao Liu <ltao@redhat.com> - 2.0.26-6

- kdumpctl: Fix the matching of plus symbol by grep's EREs

- kdump-lib: Evaluate the memory consumption by smmu and mlx5 separately

- kdump-lib: add support for 64K aarch64

- kdump-lib: Introduce parse_kver_from_path() to get kernel version from its path name

- kdump-lib: Introduce a help function _crashkernel_add()

- Simplify the management of the kernel parameter crashkernel

- kdump-lib: fix the matching pattern for debug-kernel

- kdump-lib: always specify version in is_squash_available

* Thu Jun 1 2023 Tao Liu <ltao@redhat.com> - 2.0.26-5

- Add lvm thin provision to kdump supported-kdump-targets.txt

- mkdumprd: Use the correct syntax to redirect the stderr to null

* Wed May 31 2023 Tao Liu <ltao@redhat.com> - 2.0.26-4

- kdumpctl: Add basic UKI support

- kdumpctl: Move temp file in get_kernel_size to global temp dir

- kdumpctl: Move get_kernel_size to kdumpctl

- kdump-lib: fix prepare_cmdline

- mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS

* Tue May 9 2023 Tao Liu <ltao@redhat.com> - 2.0.26-3

- Rebase makedumpfile to v1.7.3

- kdumpctl: lower the log level in reset_crashkernel_for_installed_kernel

* Fri Apr 21 2023 Tao Liu <ltao@redhat.com> - 2.0.26-2

- Rebase makedumpfile to upstream latest(8e8b8814be1)

- Show how much time kdump has waited for the network to be ready

- Tell nmcli to not escape colon when getting the path of connection profile

* Fri Apr 7 2023 Tao Liu <ltao@redhat.com> - 2.0.26-1

- Rebase kexec-tools to v2.0.26

* Tue Mar 21 2023 Tao Liu <ltao@redhat.com> - 2.0.25-14

- Install nfsv4-related drivers when users specify nfs dumping via dracut_args

- Revert "ppc64: tackle SRCU hang issue"

- sysconfig: add zfcp.allow_lun_scan to KDUMP_COMMANDLINE_REMOVE on s390

* Fri Mar 10 2023 Tao Liu <ltao@redhat.com> - 2.0.25-13

- kdump-lib: Add the CoreOS kernel dir to the boot_dirlist

- kdump-lib: attempt to fix BOOT_IMAGE detection

- kdump-lib: change how ostree based systems are detected

- kdump-lib: clear up references to Atomic/CoreOS

* Fri Feb 24 2023 Tao Liu <ltao@redhat.com> - 2.0.25-12

- Reset crashkernel to default value if newly installed kernel has crashkernel=auto

- Use the correct command to get architecture

* Wed Jan 11 2023 Pingfan Liu <piliu@redhat.com> - 2.0.25-11

- ppc64: tackle SRCU hang issue

* Tue Dec 27 2022 Pingfan Liu <piliu@redhat.com> - 2.0.25-10

- Update supported-kdump-targets.txt

- dracut-module-setup.sh: skip installing driver for the loopback interface

- Don't try to update crashkernel when bootloader is not installed

- dracut-module-setup.sh: also install the driver of physical NIC for Hyper-V VM with accelerated networking

- fadump: use 'zstd' as the default compression method

- fadump: fix default initrd backup and restore logic

- fadump: add a kernel install hook to clean up fadump initramfs

- fadump: avoid status check while starting in fadump mode

- spec: only install mkfadumprd for ppc

- fadump: preserve file modification time to help with hardlinking

- fadump: do not use squash to reduce image size

* Mon Dec 19 2022 Tao Liu <ltao@redhat.com> - 2.0.25-9

- Add virtiofs to kdump supported-kdump-targets.txt

- dracut-module-setup.sh: stop overwriting dracut's trap handler

* Wed Dec 7 2022 Tao Liu <ltao@redhat.com> - 2.0.25-8

- kexec-tools: ppc64: remove rma_top limit

- kdumpctl: Optimize _find_kernel_path_by_release regex string

- kdump.conf: use a simple generator script to maintain

* Fri Nov 25 2022 Tao Liu <ltao@redhat.com> - 2.0.25-7

- Don't run kdump_check_setup_iscsi in a subshell in order to collect needed network interfaces

* Thu Nov 24 2022 Tao Liu <ltao@redhat.com> - 2.0.25-6

- Simplify setup_znet by copying connection profile to initrd

- Wait for the network to be truly ready before dumping vmcore

- Address the cases where a NIC has a different name in kdump kernel

- Reduce kdump memory consumption by only installing needed NIC drivers

- Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces

- Set up kdump network by directly copying NM connection profile to initrd

- Stop dracut 35network-manager from running nm-initrd-generator

- Apply the timeout configuration of nm-initrd-generator

- Determine whether IPv4 or IPv6 is needed

- Add functions to copy NetworkManage connection profiles to the initramfs

- Fix error for vlan over team network interface

* Fri Nov 11 2022 Tao Liu <ltao@redhat.com> - 2.0.25-5

- Don't check fs modified when dump target is lvm2 thinp

- Add dependency of dracut lvmthinpool-monitor module

- lvm.conf should be check modified if lvm2 thinp enabled

- Add lvm2 thin provision dump target checker

- Fix the sync issue for dump_fs

* Tue Nov 1 2022 Tao Liu <ltao@redhat.com> - 2.0.25-4

- Rebase makedumpfile to 1.7.2

- Include the memory overhead cost of cryptsetup when estimating the memory requirement for LUKS-encrypted target

- Choosing the most memory-consuming key slot when estimating the memory requirement for LUKS-encrypted target

- Skip reading /etc/defaut/grub for s390x

- Only try to reset crashkernel for osbuild during package install

- Prefix reset-crashkernel-{for-installed_kernel,after-update} with underscore

- use /run/ostree-booted to tell if scriptlet is running on OSTree system

* Wed Oct 26 2022 Tao Liu <ltao@redhat.com> - 2.0.25-3

- virtiofs support for kexec-tools

- Seperate dracut and dracut-squash compressor for zstd

* Mon Oct 17 2022 Tao Liu <ltao@redhat.com> - 2.0.25-2

- mkdumprd: Improve error messages on non-existing NFS target directories

- fadump: avoid non-debug kernel use for fadump case

* Wed Sep 21 2022 Tao Liu <ltao@redhat.com> - 2.0.25-1

- Rebase kexec-tools to v2.0.25

- remind the users to run zipl after calling grubby on s390x

- remove useless --zipl when calling grubby to update kernel command line

- skip updating /etc/default/grub for s390x

- Allow to update kexec-tools using virt-customize for cloud base image

- kdumpctl: make the kdump.log root-readable-only

* Tue Jul 12 2022 Tao Liu <ltao@redhat.com> - 2.0.24-5

- kdump-lib: use non-debug kernels first

- kdump-lib: fix typo in variable name

* Wed Jun 15 2022 Tao Liu <ltao@redhat.com> - 2.0.24-4

- crashkernel: optimize arm64 reserved size if PAGE_SIZE=4k

- kdump-lib.sh: Check the output of blkid with sed instead of eval

* Tue Jun 7 2022 Tao Liu <ltao@redhat.com> - 2.0.24-3

- kdump.sysconfig*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE

* Mon May 23 2022 Tao Liu <ltao@redhat.com> - 2.0.24-2

- remove the upper bound of default crashkernel value example

- update fadump-howto

- update kexec-kdump-howto

- update crashkernel-howto

- add man documentation for kdumpctl get-default-crashkernel

- improve get_recommend_size

- fix a calculation error in get_system_size

* Thu May 5 2022 Tao Liu <ltao@redhat.com> - 2.0.24-1

- Rebase kexec-tools to v2.0.24

- Rebase makedumpfile to 1.7.1

- Avoid false-positive mem_section validation with vmlinux

* Fri Apr 8 2022 Tao Liu <ltao@redhat.com> - 2.0.23-10

- try to update the crashkernel in GRUB_ETC_DEFAULT after kexec-tools updates the default crashkernel value

- address the case where there are multiple values for the same kernel arg

- s390: add support for --reuse-cmdline

- use slurp_proc_file() in get_command_line()

- add slurp_proc_file()

- s390: use KEXEC_ALL_OPTIONS

- s390: add variable command line size

- util_lib/elf_info: harden parsing of printk buffer

- print error when reading with unsupported compression

- use cycle detection when parsing the prink log_buf

- use pointer arithmetics for dump_dmesg

- add generic cycle detection

* Fri Feb 25 2022 Tao Liu <ltao@redhat.com> - 2.0.23-9

- makedumpfile: sadump, kaslr: fix failure of calculating kaslr_offset

* Mon Feb 21 2022 Tao Liu <ltao@redhat.com> - 2.0.23-8

- update kernel crashkernel in posttrans RPM scriptlet when updating kexec-tools

* Mon Feb 14 2022 Tao Liu <ltao@redhat.com> - 2.0.23-7

- fix incorrect usage of _get_all_kernels_from_grubby

- fix the mistake of swapping function parameters of read_proc_environ_var

* Wed Jan 26 2022 Tao Liu <ltao@redhat.com> - 2.0.23-6

- Revert "Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel"

- fix broken kdump_get_arch_recommend_size

- remove the upper bound of 102400T for the range in default crashkernel

- fix the error of parsing the container environ variable for osbuild

- mkdumprd (RHEL-only): add nvme module by force

- Remove dropped patches

- s390: handle R_390_PLT32DBL reloc entries in machine_apply_elf_rel()

- spec: add hostname.rpm into Recommends list

- move variable FENCE_KDUMP_SEND from kdump-lib.sh to kdump-lib-initramfs.sh

* Tue Jan 11 2022 Tao Liu <ltao@redhat.com> - 2.0.23-5

- Set zstd as recommented for kexec-tools

- fix "kdump: Invalid kdump config option auto_reset_crashkernel" error

- use grep -s to suppress error messages about nonexistent or unreadable files

* Thu Jan 6 2022 Tao Liu <ltao@redhat.com> - 2.0.23-4

- Set zstd as the default compression method for kdump initrd

- kdump-lib.sh: Escape '|' for 'failure_action|default' in is_dump_to_rootfs

- dracut-early-kdump-module-setup.sh: install xargs and kdump-lib-initramfs.sh

- update crashkernel-howto

- set up kernel crashkernel for osbuild in kernel hook

- reset kernel crashkernel for the special case where the kernel is updated right after kexec-tools

- try to reset kernel crashkernel when kexec-tools updates the default crashkernel value

- introduce the auto_reset_crashkernel option to kdump.conf

- rewrite reset_crashkernel to support fadump and to used by RPM scriptlet

- fix incorrect usage of rpm-ostree to update kernel command line parameters

- add helper functions to get kernel path by kernel release and the path of current running kernel

- add helper functions to get dump mode

- add a helper function to read kernel cmdline parameter from grubby --info

- provide kdumpctl get-default-crashkernel for kdump_anaconda_addon and RPM scriptlet

- factor out kdump_get_arch_recommend_crashkernel

- update default crashkernel value

- ppc64/ppc64le: drop cpu online rule in 40-redhat.rules in kdump initramfs

* Wed Dec 8 2021 Tao Liu <ltao@redhat.com> - 2.0.23-3

- Update eppic to latest upstream snapshot

- Update crashkernel-howto.txt

- Remove references to systemd-sysv-convert

- kdump/ppc64: suppress the error message "Could not find a registered notification tool" from servicelog_notify

- fadump: improve fadump-howto.txt about remote dump target setup

- Don't exit 1 from 92-crashkernel.install if zipl is absent (#1993505)

- Document/kexec-kdump-howto.txt: improve notes for kdump_pre and kdump_post scripts

* Fri Dec 3 2021 Tao Liu <ltao@redhat.com> - 2.0.23-2

- kdump/ppc64: migration action registration clean up

- kdump/ppc64: rebuild initramfs image after migration

- Update supported-kdump-targets.txt

- add keyutils as a weak dependency for POWER

- kdumpctl: enable secure boot on ppc64le LPARs

- kdump.sysconfig: make kexec_file_load as default option on arm64

- kdump.sysconfig: make kexec_file_load as default option on ppc64le

* Thu Nov 11 2021 Tao Liu <ltao@redhat.com> - 2.0.23-1

- Enable zstd compression for makedumpfile in kexec-tools.spec

- Update makedumpfile to 1.7.0

* Wed Nov 10 2021 Tao Liu <ltao@redhat.com> - 2.0.22-16

- fix broken extra_bins when installing multiple binaries

- mkdumprd: drop mountaddr/mountproto nfs mount options

- 92-crashkernel.install: fix exit code

- dracut-early-kdump.sh: make it POSIX compatible

- Add header comment for POSIX compliant scripts

- mkdumprd: allow using dash

- kdump-logger.sh: make it POSIX compatible

- kdump-lib.sh: reformat with shfmt

- kdump-lib.sh: declare and assign separately

- kdump-lib.sh: fix variable quoting issue

- Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel

- kdump-lib.sh: fix a few ambiguous or redundant code

- kdump-lib.sh: fix arithmetic operation syntax

- kdump-lib.sh: remove useless echo and cat

- kdump-lib.sh: rework nmcli related functions

- kdump-lib.sh: replace '[ ]' with '[[ ]]' and get rid of legacy ``

- kdump-lib-initramfs.sh: make it POSIX compatible

- dracut-kdump.sh: reformat with shfmt

- dracut-kdump.sh: make it POSIX compatible

- dracut-kdump.sh: POSIX doesn't support pipefail

- dracut-kdump.sh: Use stat instead of ls to get vmcore size

- dracut-kdump.sh: simplify dump_ssh

- dracut-kdump.sh: remove add_dump_code

- dracut-kdump.sh: don't put KDUMP_SCRIPT_DIR in PATH

- kdump-lib-initramfs.sh: move dump related functions to kdump.sh

- Merge kdump-error-handler.sh into kdump.sh

- kdump-lib-initramfs.sh: prepare to be a POSIX compatible lib

- bash scripts: reformat with shfmt

- bash scripts: declare and assign separately

- bash scripts: fix redundant exit code check

- bash scripts: fix variable quoting issue

- Don't use die in dracut-module-setup.sh

- bash scripts: replace '[ ]' with '[[ ]]' for bash scripts

- mkdumprd: display the absolute path of dump location in the check_user_configured_target()

- Don't iterate the whole /sys/devices just to find drm device

- mkdumprd: prompt the user to install nfs-utils when mounting NFS fs failed

- bash scripts: use $(...) notation instead of legacy `...`

- bash scripts: always use "read -r"

- bash scripts: get rid of unnecessary sed calls

- bash scripts: get rid of expr and let

- bash scripts: remove useless cat

- dracut-module-setup.sh: remove surrounding $() for subshell

- dracut-module-setup.sh: make iscsi check fail early if cd failed

- dracut-module-setup.sh: fix a loop over ls issue

- dracut-module-setup.sh: fix a ambiguous variable reference

- dracut-module-setup.sh: use "*" to expend array as string

- dracut-module-setup.sh: fix _bondoptions wrong references

- dracut-module-setup.sh: remove an unused variable

- dracut-module-setup.sh: rework kdump_get_ip_route_field

- mkfadumprd: make _dracut_isolate_args an array

- mkdumprd: use array to store ssh arguments in mkdir_save_path_ssh

- mkdumprd: remove an awk call in get_fs_size

- mkdumprd: fix multiple issues with get_ssh_size

- mkdumprd: remove some redundant echo

- mkdumprd: make dracut_args an array again

- mkdumprd: use kdump_get_conf_val to read config values

- kdumpctl: refine grep usage

- kdumpctl: fix fragile loops over find output

- kdumpctl: use kdump_get_conf_val to read config values

- kdump-lib.sh: use kdump_get_conf_val to read config values

- kdump-lib.sh: add a config value retrive helper

- kdump-lib.sh: add a config format and read helper

- Add a .editorconfig file

- Remove hard requirement on grubby

* Wed Sep 8 2021 Tao Liu <ltao@redhat.com> - 2.0.22-15

- Add file supported-kdump-targets.txt to kexec-tools

* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 2.0.22-14

- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags

  Related: rhbz#1991688

* Mon Aug 9 2021 Tao Liu <ltao@redhat.com> - 2.0.22-13

- Clear old crashkernl=auto in comment and doc

* Mon Aug 2 2021 Tao Liu <ltao@redhat.com> - 2.0.22-12