%global eppic_ver e8844d3793471163ae4a56d8f95897be9e5bd554 %global eppic_shortver %(c=%{eppic_ver}; echo ${c:0:7}) %global mkdf_ver 1.7.4 %global mkdf_shortver %(c=%{mkdf_ver}; echo ${c:0:7}) Name: kexec-tools Version: 2.0.27 Release: 18%{?dist} License: GPLv2 Summary: The kexec/kdump userspace component Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.xz Source1: kdumpctl Source2: kdump.sysconfig Source3: kdump.sysconfig.x86_64 Source4: kdump.sysconfig.i386 Source5: kdump.sysconfig.ppc64 Source7: mkdumprd Source8: gen-kdump-conf.sh Source9: https://github.com/makedumpfile/makedumpfile/archive/%{mkdf_ver}/makedumpfile-%{mkdf_shortver}.tar.gz Source10: kexec-kdump-howto.txt Source11: fadump-howto.txt Source12: mkdumprd.8 Source13: 98-kexec.rules Source14: 98-kexec.rules.ppc64 Source15: kdump.conf.5 Source16: kdump.service Source18: kdump.sysconfig.s390x Source19: https://github.com/lucchouina/eppic/archive/%{eppic_ver}/eppic-%{eppic_shortver}.tar.gz Source20: kdump-lib.sh Source21: kdump-in-cluster-environment.txt Source22: kdump-dep-generator.sh Source23: kdump-lib-initramfs.sh Source24: kdump.sysconfig.ppc64le Source25: kdumpctl.8 Source26: live-image-kdump-howto.txt Source27: early-kdump-howto.txt Source28: kdump-udev-throttler Source29: kdump.sysconfig.aarch64 Source30: 60-kdump.install Source31: kdump-logger.sh Source32: mkfadumprd Source33: 92-crashkernel.install Source34: crashkernel-howto.txt Source35: kdump-migrate-action.sh Source36: kdump-restart.sh Source37: 60-fadump.install Source38: supported-kdump-targets.txt ####################################### # These are sources for mkdumpramfs # Which is currently in development ####################################### Source100: dracut-kdump.sh Source101: dracut-module-setup.sh Source102: dracut-monitor_dd_progress Source104: dracut-kdump-emergency.service Source106: dracut-kdump-capture.service Source107: dracut-kdump-emergency.target Source108: dracut-early-kdump.sh Source109: dracut-early-kdump-module-setup.sh Source200: dracut-fadump-init-fadump.sh Source201: dracut-fadump-module-setup.sh %ifarch ppc64 ppc64le Requires(post): servicelog Recommends: keyutils %endif Requires(pre): coreutils sed zlib Requires: dracut >= 050 Requires: dracut-network >= 050 Requires: dracut-squash >= 050 Requires: ethtool Requires: binutils Recommends: grubby Recommends: hostname BuildRequires: make BuildRequires: zlib-devel elfutils-devel glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel libzstd-devel BuildRequires: pkgconfig intltool gettext BuildRequires: systemd-rpm-macros BuildRequires: automake autoconf libtool %ifarch %{ix86} x86_64 ppc64 ppc s390x ppc64le Obsoletes: diskdumputils netdump kexec-tools-eppic %endif %ifnarch s390x Requires: systemd-udev%{?_isa} %endif #START INSERT # # Patches 0 through 100 are meant for x86 kexec-tools enablement # # # Patches 101 through 200 are meant for x86_64 kexec-tools enablement # # # Patches 301 through 400 are meant for ppc64 kexec-tools enablement # # # Patches 401 through 500 are meant for s390 kexec-tools enablement # # # Patches 501 through 600 are meant for ARM kexec-tools enablement # # # Patches 601 onward are generic patches # Patch601: kexec-update-manpage-with-explicit-mention-of-clean-.patch Patch602: kexec_file-add-kexec_file-flag-to-support-debug-prin.patch %description kexec-tools provides /sbin/kexec binary that facilitates a new kernel to boot using the kernel's kexec feature either on a normal or a panic reboot. This package contains the /sbin/kexec binary and ancillary utilities that together form the userspace component of the kernel's kexec feature. %prep %setup -q mkdir -p -m755 kcp tar -z -x -v -f %{SOURCE9} tar -z -x -v -f %{SOURCE19} %patch601 -p1 %patch602 -p1 %ifarch ppc %define archdef ARCH=ppc %endif %build autoreconf %configure \ %ifarch ppc64 --host=powerpc64-redhat-linux-gnu \ --build=powerpc64-redhat-linux-gnu \ %endif %ifarch ppc64le --host=powerpc64le-redhat-linux-gnu \ --build=powerpc64le-redhat-linux-gnu \ %endif --sbindir=/usr/sbin rm -f kexec-tools.spec.in # setup the docs cp %{SOURCE10} . cp %{SOURCE11} . cp %{SOURCE21} . cp %{SOURCE26} . cp %{SOURCE27} . cp %{SOURCE34} . cp %{SOURCE38} . # Generate kdump.conf file %{SOURCE8} %{_target_cpu} > kdump.conf make %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64 make -C eppic-%{eppic_ver}/libeppic make -C makedumpfile-%{mkdf_ver} LINKTYPE=dynamic USELZO=on USESNAPPY=on USEZSTD=on make -C makedumpfile-%{mkdf_ver} LDFLAGS="$LDFLAGS -I../eppic-%{eppic_ver}/libeppic -L../eppic-%{eppic_ver}/libeppic" eppic_makedumpfile.so %endif %install mkdir -p -m755 $RPM_BUILD_ROOT/usr/sbin mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/pre.d mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/post.d mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/ mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/ mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir} mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump mkdir -p -m755 $RPM_BUILD_ROOT%{_udevrulesdir} mkdir -p $RPM_BUILD_ROOT%{_unitdir} mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir} mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir} mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump mkdir -p -m755 $RPM_BUILD_ROOT%{_sharedstatedir}/kdump install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl install -m 755 build/sbin/kexec $RPM_BUILD_ROOT/usr/sbin/kexec install -m 755 build/sbin/vmcore-dmesg $RPM_BUILD_ROOT/usr/sbin/vmcore-dmesg install -m 644 build/man/man8/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/ install -m 644 build/man/man8/vmcore-dmesg.8 $RPM_BUILD_ROOT%{_mandir}/man8/ SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu} [ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch} [ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/usr/sbin/mkdumprd install -m 644 kdump.conf $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8 install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8 install -m 644 %{SOURCE25} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8 install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh install -m 755 %{SOURCE23} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh install -m 755 %{SOURCE31} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-logger.sh %ifarch ppc64 ppc64le install -m 755 %{SOURCE32} $RPM_BUILD_ROOT/usr/sbin/mkfadumprd install -m 755 %{SOURCE35} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-migrate-action.sh install -m 755 %{SOURCE36} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-restart.sh %endif %ifnarch s390x install -m 755 %{SOURCE28} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler %endif %ifnarch s390x ppc64 ppc64le # For s390x the ELF header is created in the kdump kernel and therefore kexec # udev rules are not required install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules %endif %ifarch ppc64 ppc64le install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules install -m 755 -D %{SOURCE37} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-fadump.install %endif install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5 install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service install -m 755 -D %{SOURCE22} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh install -m 755 -D %{SOURCE30} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-kdump.install install -m 755 -D %{SOURCE33} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/92-crashkernel.install %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64 install -m 755 makedumpfile-%{mkdf_ver}/makedumpfile $RPM_BUILD_ROOT/usr/sbin/makedumpfile gzip -c makedumpfile-%{mkdf_ver}/makedumpfile.8 > makedumpfile-%{mkdf_ver}/makedumpfile.8.gz install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz gzip -c makedumpfile-%{mkdf_ver}/makedumpfile.conf.5 > makedumpfile-%{mkdf_ver}/makedumpfile.conf.5.gz install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample install -m 755 makedumpfile-%{mkdf_ver}/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/ install -m 644 makedumpfile-%{mkdf_ver}/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/ %endif %define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g') %define remove_dracut_early_kdump_prefix() %(echo -n %1|sed 's/.*dracut-early-kdump-//g') %define remove_dracut_fadump_prefix() %(echo -n %1|sed 's/.*dracut-fadump-//g') # deal with dracut modules mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}} cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}} cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}} cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE104}} cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}} cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}} chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}} chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}} mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump cp %{SOURCE108} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}} cp %{SOURCE109} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}} chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}} chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}} %ifarch ppc64 ppc64le mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit cp %{SOURCE200} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}} cp %{SOURCE201} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}} chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}} chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}} %endif %define dracutlibdir %{_prefix}/lib/dracut #and move the custom dracut modules to the dracut directory mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/ mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/ %post # Initial installation %systemd_post kdump.service touch /etc/kdump.conf %ifarch ppc64 ppc64le servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh 2>/dev/null servicelog_notify --add --command=/usr/lib/kdump/kdump-migrate-action.sh --match='refcode="#MIGRATE" and serviceable=0' --type=EVENT --method=pairs_stdin >/dev/null %endif # This portion of the script is temporary. Its only here # to fix up broken boxes that require special settings # in /etc/sysconfig/kdump. It will be removed when # These systems are fixed. if [ -d /proc/bus/mckinley ] then # This is for HP zx1 machines # They require machvec=dig on the kernel command line sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \ /etc/sysconfig/kdump > /etc/sysconfig/kdump.new mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump elif [ -d /proc/sgi_sn ] then # This is for SGI SN boxes # They require the --noio option to kexec # since they don't support legacy io sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \ /etc/sysconfig/kdump > /etc/sysconfig/kdump.new mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump fi %postun %systemd_postun_with_restart kdump.service %preun %ifarch ppc64 ppc64le servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh >/dev/null %endif %systemd_preun kdump.service %triggerin -- kernel-kdump touch %{_sysconfdir}/kdump.conf %triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump # List out the initrds here, strip out version nubmers # and search for corresponding kernel installs, if a kernel # is not found, remove the corresponding kdump initrd IMGDIR=/boot for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null` do KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'` if [ ! -e $IMGDIR/vmlinuz-$KDVER ] then # We have found an initrd with no corresponding kernel # so we should be able to remove it rm -f $i fi done %posttrans # Try to reset kernel crashkernel value to new default value or set up # crasherkernel value for new install # # Note # 1. Skip ostree systems as they are not supported. # 2. For Fedora 36 and RHEL9, "[ $1 == 1 ]" in posttrans scriptlet means both install and upgrade; # For Fedora > 36, "[ $1 == 1 ]" only means install and "[ $1 == 2 ]" means upgrade if [ ! -f /run/ostree-booted ] && [ $1 == 1 -o $1 == 2 ]; then kdumpctl _reset-crashkernel-after-update : fi %files /usr/sbin/kexec %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64 /usr/sbin/makedumpfile %endif %ifarch ppc64 ppc64le /usr/sbin/mkfadumprd %{_prefix}/lib/kernel/install.d/60-fadump.install %endif /usr/sbin/mkdumprd /usr/sbin/vmcore-dmesg %{_bindir}/* %{_datadir}/kdump %{_prefix}/lib/kdump %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64 %{_sysconfdir}/makedumpfile.conf.sample %endif %config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump %config(noreplace,missingok) %verify(not mtime) %{_sysconfdir}/kdump.conf %ifnarch s390x %config %{_udevrulesdir} %{_udevrulesdir}/../kdump-udev-throttler %endif %{dracutlibdir}/modules.d/* %dir %{_localstatedir}/crash %dir %{_sysconfdir}/kdump %dir %{_sysconfdir}/kdump/pre.d %dir %{_sysconfdir}/kdump/post.d %dir %{_sharedstatedir}/kdump %{_mandir}/man8/kdumpctl.8.gz %{_mandir}/man8/kexec.8.gz %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64 %{_mandir}/man8/makedumpfile.8.gz %endif %{_mandir}/man8/mkdumprd.8.gz %{_mandir}/man8/vmcore-dmesg.8.gz %{_mandir}/man5/* %{_unitdir}/kdump.service %{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh %{_prefix}/lib/kernel/install.d/60-kdump.install %{_prefix}/lib/kernel/install.d/92-crashkernel.install %doc News %license COPYING %doc TODO %doc kexec-kdump-howto.txt %doc early-kdump-howto.txt %doc fadump-howto.txt %doc kdump-in-cluster-environment.txt %doc live-image-kdump-howto.txt %doc crashkernel-howto.txt %doc supported-kdump-targets.txt %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64 %{_libdir}/eppic_makedumpfile.so /usr/share/makedumpfile/ %endif %changelog * Mon Oct 21 2024 Tao Liu - 2.0.27-18 - Return the correct exit code of rebuild initrd * Tue Oct 8 2024 Tao Liu - 2.0.27-17 - Introduce vmcore creation notification to kdump * Tue Sep 10 2024 Tao Liu - 2.0.27-16 - Revert "lib: Ensure we don't find bind mounts for device target" * Wed Aug 7 2024 Tao Liu - 2.0.27-15 - Support setting up Open vSwitch (Ovs) Bridge network * Wed Jul 24 2024 Tao Liu - 2.0.27-14 - lib: Ensure we don't find bind mounts for device target - dracut: Disable ostree-prepare-root * Tue Jul 16 2024 Tao Liu - 2.0.27-13 - kdump-lib: Drop 'file' dependency in is_uki - kdumpctl.8: Add description to reset-crashkernel --reboot - kdumpctl: Fix misleading message and erratic reboot in reset_crashkernel - kdumpctl: Drop default kexec '-d' option * Thu Jun 27 2024 Tao Liu - 2.0.27-12 - ppc64le: replace kernel cmdline maxcpu=1 with nr_cpus=1 * Fri May 31 2024 Tao Liu - 2.0.27-11 - sysconfig: add pcie_ports compat to KDUMP_COMMANDLINE_APPEND on x86_64 * Tue May 14 2024 Tao Liu - 2.0.27-10 - mkdumprd: Fix makedumpfile parameter check. - Install the driver of physical device for a SR-IOV virtual device - Try to install PHY and MDIO bus drivers explicitly * Wed May 08 2024 Tao Liu - 2.0.27-9 - kexec_file: add kexec_file flag to support debug printing * Tue Jan 30 2024 Tao Liu - 2.0.27-8 - dracut-module-setup: Skip initrd-cleanup and initrd-parse-etc in kdump * Wed Jan 3 2024 Tao Liu - 2.0.27-7 - Explain the auto_reset_crashkernel option in more details - Use the same /etc/resolve.conf in kdump initrd if it's managed manually * Wed Dec 20 2023 Tao Liu - 2.0.27-6 - Use the same /etc/resolve.conf in kdump initrd if it's managed manually * Fri Nov 24 2023 Tao Liu - 2.0.27-5 - kdumpctl: Only returns immediately after an error occurs in check_*_modified * Thu Nov 16 2023 Tao Liu - 2.0.27-4 - kdump-lib.sh: add extra 64M to default crashkernel if sme/sev is active - Allow _crashkernel_add to address larger memory ranges - kdump-lib: Harden _crashkernel_add * Wed Nov 8 2023 Tao Liu - 2.0.27-3 - Rebase makedumpfile to v1.7.4 - powerpc: update kdumpctl to load kernel signing key for fadump - powerpc: update kdumpctl to remove deletion of kernel signing key once loaded * Mon Nov 6 2023 Tao Liu - 2.0.27-2 - kexec: update manpage with explicit mention of clean kexec * Tue Sep 26 2023 Tao Liu - 2.0.26-9 - Introduce a function to get reserved memory size - powerpc: update fadump sysfs node path - kdumpctl: merge check_current_{kdump,fadump}_status - kdumpctl: remove unnecessary uses of $? * Tue Jul 4 2023 Tao Liu - 2.0.26-8 - spec: kdump/ppc64: make servicelog_notify silent when there are no errors * Wed Jun 21 2023 Tao Liu - 2.0.26-7 - kdumpctl: Fix temporary directory location - kdump-lib: Match 64k debug kernel in prepare_kdump_bootinfo() * Thu Jun 15 2023 Tao Liu - 2.0.26-6 - kdumpctl: Fix the matching of plus symbol by grep's EREs - kdump-lib: Evaluate the memory consumption by smmu and mlx5 separately - kdump-lib: add support for 64K aarch64 - kdump-lib: Introduce parse_kver_from_path() to get kernel version from its path name - kdump-lib: Introduce a help function _crashkernel_add() - Simplify the management of the kernel parameter crashkernel - kdump-lib: fix the matching pattern for debug-kernel - kdump-lib: always specify version in is_squash_available * Thu Jun 1 2023 Tao Liu - 2.0.26-5 - Add lvm thin provision to kdump supported-kdump-targets.txt - mkdumprd: Use the correct syntax to redirect the stderr to null * Wed May 31 2023 Tao Liu - 2.0.26-4 - kdumpctl: Add basic UKI support - kdumpctl: Move temp file in get_kernel_size to global temp dir - kdumpctl: Move get_kernel_size to kdumpctl - kdump-lib: fix prepare_cmdline - mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS * Tue May 9 2023 Tao Liu - 2.0.26-3 - Rebase makedumpfile to v1.7.3 - kdumpctl: lower the log level in reset_crashkernel_for_installed_kernel * Fri Apr 21 2023 Tao Liu - 2.0.26-2 - Rebase makedumpfile to upstream latest(8e8b8814be1) - Show how much time kdump has waited for the network to be ready - Tell nmcli to not escape colon when getting the path of connection profile * Fri Apr 7 2023 Tao Liu - 2.0.26-1 - Rebase kexec-tools to v2.0.26 * Tue Mar 21 2023 Tao Liu - 2.0.25-14 - Install nfsv4-related drivers when users specify nfs dumping via dracut_args - Revert "ppc64: tackle SRCU hang issue" - sysconfig: add zfcp.allow_lun_scan to KDUMP_COMMANDLINE_REMOVE on s390 * Fri Mar 10 2023 Tao Liu - 2.0.25-13 - kdump-lib: Add the CoreOS kernel dir to the boot_dirlist - kdump-lib: attempt to fix BOOT_IMAGE detection - kdump-lib: change how ostree based systems are detected - kdump-lib: clear up references to Atomic/CoreOS * Fri Feb 24 2023 Tao Liu - 2.0.25-12 - Reset crashkernel to default value if newly installed kernel has crashkernel=auto - Use the correct command to get architecture * Wed Jan 11 2023 Pingfan Liu - 2.0.25-11 - ppc64: tackle SRCU hang issue * Tue Dec 27 2022 Pingfan Liu - 2.0.25-10 - Update supported-kdump-targets.txt - dracut-module-setup.sh: skip installing driver for the loopback interface - Don't try to update crashkernel when bootloader is not installed - dracut-module-setup.sh: also install the driver of physical NIC for Hyper-V VM with accelerated networking - fadump: use 'zstd' as the default compression method - fadump: fix default initrd backup and restore logic - fadump: add a kernel install hook to clean up fadump initramfs - fadump: avoid status check while starting in fadump mode - spec: only install mkfadumprd for ppc - fadump: preserve file modification time to help with hardlinking - fadump: do not use squash to reduce image size * Mon Dec 19 2022 Tao Liu - 2.0.25-9 - Add virtiofs to kdump supported-kdump-targets.txt - dracut-module-setup.sh: stop overwriting dracut's trap handler * Wed Dec 7 2022 Tao Liu - 2.0.25-8 - kexec-tools: ppc64: remove rma_top limit - kdumpctl: Optimize _find_kernel_path_by_release regex string - kdump.conf: use a simple generator script to maintain * Fri Nov 25 2022 Tao Liu - 2.0.25-7 - Don't run kdump_check_setup_iscsi in a subshell in order to collect needed network interfaces * Thu Nov 24 2022 Tao Liu - 2.0.25-6 - Simplify setup_znet by copying connection profile to initrd - Wait for the network to be truly ready before dumping vmcore - Address the cases where a NIC has a different name in kdump kernel - Reduce kdump memory consumption by only installing needed NIC drivers - Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces - Set up kdump network by directly copying NM connection profile to initrd - Stop dracut 35network-manager from running nm-initrd-generator - Apply the timeout configuration of nm-initrd-generator - Determine whether IPv4 or IPv6 is needed - Add functions to copy NetworkManage connection profiles to the initramfs - Fix error for vlan over team network interface * Fri Nov 11 2022 Tao Liu - 2.0.25-5 - Don't check fs modified when dump target is lvm2 thinp - Add dependency of dracut lvmthinpool-monitor module - lvm.conf should be check modified if lvm2 thinp enabled - Add lvm2 thin provision dump target checker - Fix the sync issue for dump_fs * Tue Nov 1 2022 Tao Liu - 2.0.25-4 - Rebase makedumpfile to 1.7.2 - Include the memory overhead cost of cryptsetup when estimating the memory requirement for LUKS-encrypted target - Choosing the most memory-consuming key slot when estimating the memory requirement for LUKS-encrypted target - Skip reading /etc/defaut/grub for s390x - Only try to reset crashkernel for osbuild during package install - Prefix reset-crashkernel-{for-installed_kernel,after-update} with underscore - use /run/ostree-booted to tell if scriptlet is running on OSTree system * Wed Oct 26 2022 Tao Liu - 2.0.25-3 - virtiofs support for kexec-tools - Seperate dracut and dracut-squash compressor for zstd * Mon Oct 17 2022 Tao Liu - 2.0.25-2 - mkdumprd: Improve error messages on non-existing NFS target directories - fadump: avoid non-debug kernel use for fadump case * Wed Sep 21 2022 Tao Liu - 2.0.25-1 - Rebase kexec-tools to v2.0.25 - remind the users to run zipl after calling grubby on s390x - remove useless --zipl when calling grubby to update kernel command line - skip updating /etc/default/grub for s390x - Allow to update kexec-tools using virt-customize for cloud base image - kdumpctl: make the kdump.log root-readable-only * Tue Jul 12 2022 Tao Liu - 2.0.24-5 - kdump-lib: use non-debug kernels first - kdump-lib: fix typo in variable name * Wed Jun 15 2022 Tao Liu - 2.0.24-4 - crashkernel: optimize arm64 reserved size if PAGE_SIZE=4k - kdump-lib.sh: Check the output of blkid with sed instead of eval * Tue Jun 7 2022 Tao Liu - 2.0.24-3 - kdump.sysconfig*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE * Mon May 23 2022 Tao Liu - 2.0.24-2 - remove the upper bound of default crashkernel value example - update fadump-howto - update kexec-kdump-howto - update crashkernel-howto - add man documentation for kdumpctl get-default-crashkernel - improve get_recommend_size - fix a calculation error in get_system_size * Thu May 5 2022 Tao Liu - 2.0.24-1 - Rebase kexec-tools to v2.0.24 - Rebase makedumpfile to 1.7.1 - Avoid false-positive mem_section validation with vmlinux * Fri Apr 8 2022 Tao Liu - 2.0.23-10 - try to update the crashkernel in GRUB_ETC_DEFAULT after kexec-tools updates the default crashkernel value - address the case where there are multiple values for the same kernel arg - s390: add support for --reuse-cmdline - use slurp_proc_file() in get_command_line() - add slurp_proc_file() - s390: use KEXEC_ALL_OPTIONS - s390: add variable command line size - util_lib/elf_info: harden parsing of printk buffer - print error when reading with unsupported compression - use cycle detection when parsing the prink log_buf - use pointer arithmetics for dump_dmesg - add generic cycle detection * Fri Feb 25 2022 Tao Liu - 2.0.23-9 - makedumpfile: sadump, kaslr: fix failure of calculating kaslr_offset * Mon Feb 21 2022 Tao Liu - 2.0.23-8 - update kernel crashkernel in posttrans RPM scriptlet when updating kexec-tools * Mon Feb 14 2022 Tao Liu - 2.0.23-7 - fix incorrect usage of _get_all_kernels_from_grubby - fix the mistake of swapping function parameters of read_proc_environ_var * Wed Jan 26 2022 Tao Liu - 2.0.23-6 - Revert "Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel" - fix broken kdump_get_arch_recommend_size - remove the upper bound of 102400T for the range in default crashkernel - fix the error of parsing the container environ variable for osbuild - mkdumprd (RHEL-only): add nvme module by force - Remove dropped patches - s390: handle R_390_PLT32DBL reloc entries in machine_apply_elf_rel() - spec: add hostname.rpm into Recommends list - move variable FENCE_KDUMP_SEND from kdump-lib.sh to kdump-lib-initramfs.sh * Tue Jan 11 2022 Tao Liu - 2.0.23-5 - Set zstd as recommented for kexec-tools - fix "kdump: Invalid kdump config option auto_reset_crashkernel" error - use grep -s to suppress error messages about nonexistent or unreadable files * Thu Jan 6 2022 Tao Liu - 2.0.23-4 - Set zstd as the default compression method for kdump initrd - kdump-lib.sh: Escape '|' for 'failure_action|default' in is_dump_to_rootfs - dracut-early-kdump-module-setup.sh: install xargs and kdump-lib-initramfs.sh - update crashkernel-howto - set up kernel crashkernel for osbuild in kernel hook - reset kernel crashkernel for the special case where the kernel is updated right after kexec-tools - try to reset kernel crashkernel when kexec-tools updates the default crashkernel value - introduce the auto_reset_crashkernel option to kdump.conf - rewrite reset_crashkernel to support fadump and to used by RPM scriptlet - fix incorrect usage of rpm-ostree to update kernel command line parameters - add helper functions to get kernel path by kernel release and the path of current running kernel - add helper functions to get dump mode - add a helper function to read kernel cmdline parameter from grubby --info - provide kdumpctl get-default-crashkernel for kdump_anaconda_addon and RPM scriptlet - factor out kdump_get_arch_recommend_crashkernel - update default crashkernel value - ppc64/ppc64le: drop cpu online rule in 40-redhat.rules in kdump initramfs * Wed Dec 8 2021 Tao Liu - 2.0.23-3 - Update eppic to latest upstream snapshot - Update crashkernel-howto.txt - Remove references to systemd-sysv-convert - kdump/ppc64: suppress the error message "Could not find a registered notification tool" from servicelog_notify - fadump: improve fadump-howto.txt about remote dump target setup - Don't exit 1 from 92-crashkernel.install if zipl is absent (#1993505) - Document/kexec-kdump-howto.txt: improve notes for kdump_pre and kdump_post scripts * Fri Dec 3 2021 Tao Liu - 2.0.23-2 - kdump/ppc64: migration action registration clean up - kdump/ppc64: rebuild initramfs image after migration - Update supported-kdump-targets.txt - add keyutils as a weak dependency for POWER - kdumpctl: enable secure boot on ppc64le LPARs - kdump.sysconfig: make kexec_file_load as default option on arm64 - kdump.sysconfig: make kexec_file_load as default option on ppc64le * Thu Nov 11 2021 Tao Liu - 2.0.23-1 - Enable zstd compression for makedumpfile in kexec-tools.spec - Update makedumpfile to 1.7.0 * Wed Nov 10 2021 Tao Liu - 2.0.22-16 - fix broken extra_bins when installing multiple binaries - mkdumprd: drop mountaddr/mountproto nfs mount options - 92-crashkernel.install: fix exit code - dracut-early-kdump.sh: make it POSIX compatible - Add header comment for POSIX compliant scripts - mkdumprd: allow using dash - kdump-logger.sh: make it POSIX compatible - kdump-lib.sh: reformat with shfmt - kdump-lib.sh: declare and assign separately - kdump-lib.sh: fix variable quoting issue - Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel - kdump-lib.sh: fix a few ambiguous or redundant code - kdump-lib.sh: fix arithmetic operation syntax - kdump-lib.sh: remove useless echo and cat - kdump-lib.sh: rework nmcli related functions - kdump-lib.sh: replace '[ ]' with '[[ ]]' and get rid of legacy `` - kdump-lib-initramfs.sh: make it POSIX compatible - dracut-kdump.sh: reformat with shfmt - dracut-kdump.sh: make it POSIX compatible - dracut-kdump.sh: POSIX doesn't support pipefail - dracut-kdump.sh: Use stat instead of ls to get vmcore size - dracut-kdump.sh: simplify dump_ssh - dracut-kdump.sh: remove add_dump_code - dracut-kdump.sh: don't put KDUMP_SCRIPT_DIR in PATH - kdump-lib-initramfs.sh: move dump related functions to kdump.sh - Merge kdump-error-handler.sh into kdump.sh - kdump-lib-initramfs.sh: prepare to be a POSIX compatible lib - bash scripts: reformat with shfmt - bash scripts: declare and assign separately - bash scripts: fix redundant exit code check - bash scripts: fix variable quoting issue - Don't use die in dracut-module-setup.sh - bash scripts: replace '[ ]' with '[[ ]]' for bash scripts - mkdumprd: display the absolute path of dump location in the check_user_configured_target() - Don't iterate the whole /sys/devices just to find drm device - mkdumprd: prompt the user to install nfs-utils when mounting NFS fs failed - bash scripts: use $(...) notation instead of legacy `...` - bash scripts: always use "read -r" - bash scripts: get rid of unnecessary sed calls - bash scripts: get rid of expr and let - bash scripts: remove useless cat - dracut-module-setup.sh: remove surrounding $() for subshell - dracut-module-setup.sh: make iscsi check fail early if cd failed - dracut-module-setup.sh: fix a loop over ls issue - dracut-module-setup.sh: fix a ambiguous variable reference - dracut-module-setup.sh: use "*" to expend array as string - dracut-module-setup.sh: fix _bondoptions wrong references - dracut-module-setup.sh: remove an unused variable - dracut-module-setup.sh: rework kdump_get_ip_route_field - mkfadumprd: make _dracut_isolate_args an array - mkdumprd: use array to store ssh arguments in mkdir_save_path_ssh - mkdumprd: remove an awk call in get_fs_size - mkdumprd: fix multiple issues with get_ssh_size - mkdumprd: remove some redundant echo - mkdumprd: make dracut_args an array again - mkdumprd: use kdump_get_conf_val to read config values - kdumpctl: refine grep usage - kdumpctl: fix fragile loops over find output - kdumpctl: use kdump_get_conf_val to read config values - kdump-lib.sh: use kdump_get_conf_val to read config values - kdump-lib.sh: add a config value retrive helper - kdump-lib.sh: add a config format and read helper - Add a .editorconfig file - Remove hard requirement on grubby * Wed Sep 8 2021 Tao Liu - 2.0.22-15 - Add file supported-kdump-targets.txt to kexec-tools * Mon Aug 09 2021 Mohan Boddu - 2.0.22-14 - Rebuilt for IMA sigs, glibc 2.34, aarch64 flags Related: rhbz#1991688 * Mon Aug 9 2021 Tao Liu - 2.0.22-13 - Clear old crashkernl=auto in comment and doc * Mon Aug 2 2021 Tao Liu - 2.0.22-12 - kdumpctl: fix a typo - kdump_get_arch_recommend_size uses crashkernel.default * Mon Jul 26 2021 Tao Liu - 2.0.22-11 - Make `dump_to_rootfs` wait for 90s for real - Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand - kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline * Tue Jul 20 2021 Tao Liu - 2.0.22-10 - fadump-init: clean up mount points properly - fadump: kdumpctl should check the modules used by the fadump initramfs - fadump: isolate fadump initramfs image within the default one - Cleanup dead systemd services before start sysroot.mount - Revert "Revert "x86_64: enable the kexec file load by default"" * Tue Jun 29 2021 Tao Liu - 2.0.22-9 - Add a crashkernel-howto.txt doc - Add a new hook: 92-crashkernel.install - kdumpctl: Add kdumpctl reset-crashkernel - Revert "kdump-lib.sh: Remove is_atomic" - fix format issue in find_online_znet_device - check the existence of /sys/bus/ccwgroup/devices before trying to find online network device * Tue Jun 29 2021 Tao Liu - 2.0.22-8 - check for invalid physical address of /proc/kcore when making ELF dumpfile - Increase SECTION_MAP_LAST_BIT to 5 - kdumpctl: fix check_config error when kdump.conf is empty - kdump-lib.sh: fix a warning in prepare_kdump_bootinfo() * Wed Jun 23 2021 Tao Liu - 2.0.22-7 - Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable * Wed Jun 16 2021 Tao Liu - 2.0.22-6 - Add gating.yaml to RHEL-9 kexec-tools - Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet * Mon Jun 7 2021 Tao Liu - 2.0.22-5 - Use a customized emergency shell - Remove the kdump error handler isolation wrapper - Don's try to restart dracut-initqueue if it's already there * Thu May 27 2021 Tao Liu - 2.0.22-4 - kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size() * Mon May 24 2021 Tao Liu - 2.0.22-3 - kdumpctl: Add kdumpctl estimate - mkdumprd: make use of the new get_luks_crypt_dev helper - kdump-lib.sh: introduce a helper to get all crypt dev used by kdump - kdump-lib.sh: introduce a helper to get underlying crypt device - Revert "Always set vm.zone_reclaim_mode = 3 in kdump kernel" * Fri May 14 2021 Tao Liu - 2.0.22-2 - Stop reloading kdump service on CPU hotplug event for FADump - Make dracut-squash required for kexec-tools - Fix incorrect file permissions of vmcore-dmesg-incomplete.txt - Disable CMA in kdump 2nd kernel - update makedumpfile to v1.6.9 - (upstream/c9s) Warn the user if network scripts are used - Set up bond cmdline by "nmcli --get-values" - Set up dns cmdline by parsing "nmcli --get-values" - Set up s390 znet cmdline by "nmcli --get-values" - Add helper to get nmcli connection show cmd by ifname - Add helper to get nmcli connection apath by ifname - Add helper to get value by field using "nmcli --get-values" * Thu May 13 2021 Tao Liu - 2.0.22-1 - Update to kexec-tools 2.0.22 - rd.route should use the name from kdump_setup_ifname - get kdump ifname once in kdump_install_net - Implement IP netmask calculation to replace "ipcalc -m" - kdump-lib.sh: introduce functions to return recommened mem size * Sun Apr 25 2021 Tao Liu - 2.0.21-7 - Fix incorrect vmcore permissions when dumped through ssh - Fix incorrect permissions on kdump dmesg file * Fri Apr 16 2021 Mohan Boddu - 2.0.21-6 - Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937 * Tue Jan 26 2021 Fedora Release Engineering - 2.0.21-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Fri Jan 22 2021 Kairui Song - 2.0.21-4 - dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode - kdump.conf: add ipv6 example for nfs and ssh dump - fix kdump failure of saving vmcore with the scp + ipv6 method * Wed Jan 20 2021 Kairui Song - 2.0.21-3 - module-setup.sh: don't polute the namespace unnecessarily - module-setup.sh: don't source $dracutfunctions - logger: source the logger file individually - Fix dump_fs mount point detection and fallback mount - Revert "Don's try to restart dracut-initqueue if it's already failed" - Revert "Append both nofail and x-systemd.before to kdump mount target" - Doc: Improve the kdump sysconfig document - kdump.conf: Update doc about core_collector for ssh target - Merge #4 `Make dracut-squash a weak dep` - Fix a date error in the change log * Fri Jan 08 2021 Kairui Song - 2.0.21-2 - makedumpfile: make use of 'uts_namespace.name' offset in VMCOREINFO - kdumpctl: fix a variable expansion in check_fence_kdump_config() - Add BuildRequires: make - Save the final failure information to log file if saving vmcore failed * Wed Dec 23 2020 Kairui Song - 2.0.21-1 - makedumpfile: printk: use committed/finalized state values - makedumpfile: printk: add support for lockless ringbuffer - dracut-module-setup.sh: Use systemctl call to replace ln_r - Doc: improve mkdumprd man page - Don's try to restart dracut-initqueue if it's already failed - dracut-module-setup.sh: use auto6 for ipv6 * Mon Nov 30 2020 Kairui Song - 2.0.20-21 - Rebase makedumpfile to 1.6.8 - fadump-howto: update about 'nocma' and 'off' options for 'fadump=' parameter - module-setup.sh: enable vlan on team interface - kdump-lib: Fix get_bind_mount_source to support btrfs and fstab - Make get_mount_info work with bind mount - Set watchdog's pretimeout to zero in kdump kernel - kdump-lib.sh: Use a more generic helper to detect omitted dracut module - Fix the watchdog drivers detection code - Add a helper for detecting watchdog drivers - Remove a redundant nfs check - kdumpctl: split the driver detection from fs dection function * Thu Nov 19 2020 Kairui Song - 2.0.20-20 - selftest: Fix several test issue with Fedora 33 - selftest: add more detailed log and fix a test failure issue - selftest: Update test base image to Fedora 33 - selftest: Fix qcow2 image format detect - selftest: Always use the get_image_fmt helper - Doc: improve the usage documentation of the logger - Update the kdump sysconfig - Capitalize the configuration name of log level - Add the rd.kdumploglvl option to control log level in the second kernel - Appropriately converts logger numeric level to syslog log level - Remove unused log levels for kdump logger - Add sanity checks for the log levels - Move watchdog detect and install code to module-setup.sh - Add a helper to omit non-mandatory dracut module - Move some dracut module dependencies checks to module-setup.sh - Add code comments to help better understanding * Thu Nov 05 2020 Kairui Song - 2.0.20-19 - Fix comment about ssh dump target - mkdumprd: Ensure kdumpbase is added - kdump.service: use ConditionKernelCommandLine=crashkernel - Revert "Revert "s390x: enable the kexec file load by def - increase makdumpfile default message level to 7 - Fix error when using raw target with opalcore - module-setup.sh: Instead of drop journalctl log, just don't read kmsg - Doc: add a documentation for the usage of logger - Improve debugging in the kdump kernel - kdumpctl: add the '-d' option to enable the kexec loading debugging messages - kdump.sysconfig: add the kdump logger configurations - enable the logger for kdump - introduce the kdump logger from the dracut - Rework check_config and warn on any duplicated option - (watchdog) kdump-lib.sh: detect secure boot on s390 - Don't drop journalctl content if failure action is "shell" - dracut-module-install: Move systemd conf install code to a function - selftest: Show the path of dumped vmcore on test end - selftest: Add document for selftests - selftest: Add basic test framework - selftest: Add basic infrastructure to build test image * Thu Aug 27 2020 Kairui Song - 2.0.20-18 - mkdumprd: Improve the warning message when using encrypted target - kdump-lib.sh: Remove is_atomic - Refactor kernel image and initrd detection code - early-kdump: Use consistent symbol link for kernel and initramfs - Add a kernel install hook to clean up kdump initramfs * Tue Aug 04 2020 Kairui Song - 2.0.20-17 - Drop static lib dependencies - Revert "x86_64: enable the kexec file load by default" - Revert "s390x: enable the kexec file load by default" - kdumpctl: exit if either pre.d or post.d is missing - kdump_pre: make notes more precise - dracut-kdump.sh: exit shell when machine reboot - kdumpctl: detect modification of scripts by its directory's timestamp - module-setup.sh: suppress false alarm - kexec-tools.spec: make the existence of pre.d and post.d mandatory - ppc64/kdump: use kexec_file_load when secureboot is enabled * Sat Aug 01 2020 Fedora Release Engineering - 2.0.20-16 - Second attempt - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Tue Jul 28 2020 Fedora Release Engineering - 2.0.20-15 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Wed Jul 1 2020 Kairui Song - 2.0.20-14 - s390x: enable the kexec file load by default - x86_64: enable the kexec file load by default - Revert "s390x: add kdump sysconfig option to use the kexec_file_load() syscall" - Revert "kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default" - kdump.conf: fix a grammar issue - man: improve description about /etc/kdump/{pre.d,post.d}interface - mkdumprd: Improve the error message for umounted dump target - mkdumprd: Fix nfs detection in to_mount - Always wrap up call to dracut get_persistent_dev function - s390x: add kdump sysconfig option to use the kexec_file_load() syscall - mkdumprd: Fix dracut error on multiple extra_modules - Fix kdump failure when mount target specified by dracut_args - kdump.conf: Specify /etc/kdump/{pre.d,post.d}interface - dracut-kdump.sh: Execute the binary and script filesin /etc/kdump/{pre.d,post.d} - kdumpctl: Check the update of the binary and script files in /etc/kdump/{pre.d,post.d} - dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs - Drop switch root capability for non fadump initramfs - fadump: update fadump-howto.txt with some more troubleshooting help - fadump-howto.txt: source it in spec file - Don't inherit swiotlb parameter form 1st kernel by default - module-setup.sh: Add "rd.neednet" parameter if network is needed - Revert "Add a hook to wait for kdump target in initqueue" - kdump.sysconfig: Remove the option 'log_buf_len' from kdump command line * Fri May 22 2020 Kairui Song - 2.0.20-13 - Update docs for the new noauto dump target support - kexec-kdump-howto.txt: Add some format to the document - mkdumprd: generate usable kdump initramfs even target is not mounted - User get_mount_info to replace findmnt calls - kdump-lib.sh: add fstab failback helper for getting mount info - Allow calling mkdumprd from kdumpctl even if targat not mounted - Add a is_mounted helper - Introduce get_kdump_mntpoint_from_target and fix duplicated / - Append both nofail and x-systemd.before to kdump mount target - Fix the problem that kdump prints redundant / - Partially Revert "Don't mount the dump target unless needed" - fadump: update fadump-howto.txt with some troubleshooting help - Add a new option 'rd.znet_ifname' in order to use it in udev rules - Don't unmount the dump target just after saving vmcore - dracut-module-setup.sh: fix breakage in get_pcs_fence_kdump_nodes() - dracut-module-setup.sh: ensure cluster info is ready before query * Thu Apr 2 2020 Kairui Song - 2.0.20-12 - Remove adjust_bind_mount_path call - No longer treat atomic/silverblue specially - mkdumprd: Simplify handling of user specified target - mkdumprd: Use get_save_path instead of parsing config - Remove is_dump_target_configured - dracut-module-setup.sh: improve get_alias() * Tue Mar 24 2020 Kairui Song - 2.0.20-11 - Fix a potential syntax error - Use read_strip_comments to filter the installed kdump.conf - kdumpctl: fix driver change detection on latest Fedora - kdumpctl: check hostonly-kernel-modules.txt for kernel module - dracut-module-setup.sh: Ensure initrd.target.wants dir exists - mkdumprd: Use DUMP_TARGET which printing error message during ssh - kdump-lib.sh: Fix is_user_configured_dump_target() - mkdumprd: Use makedumpfile --check-params option - makedumpfile: Introduce --check-params option - Improves the early-kdump-howto.txt document in several points: * Thu Feb 13 2020 Kairui Song - 2.0.20-10 - Add --force option to step 2 in early-kdump-howto.txt - Fix typo in early-kdump-howto.txt - kexec-tools/module-setup: Ensure eth devices get IP address for VLAN - powerpc: enable the scripts to capture dump on POWERNV platform - kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default * Wed Jan 29 2020 Kairui Song - 2.0.20-9 - Fix building failure * Wed Jan 29 2020 Kairui Song - 2.0.20-8 - Update makedumpfile to 1.6.7 - Add a hook to wait for kdump target in initqueue - Always install sed and awk - Fix potential ssh/nfs kdump failure of missing "ip" command - kdump-lib.sh: Fix is_nfs_dump_target - Always use get_save_path to get the 'path' option - kdump-lib: Don't abuse echo, and clean up * Sun Dec 29 2019 Kairui Song - 2.0.20-7 - Fix building failure due to makedumpfile's compile flag - mkdumprd: Fix dracut args parsing * Thu Nov 28 2019 Kairui Song - 2.0.20-6 - kdump-error-handler.service: Remove ExecStopPost - mkdumprd: simplify dracut args parsing - Always set vm.zone_reclaim_mode = 3 in kdump kernel - kdumpctl: make reload fail proof - spec: move binaries from /sbin to /usr/sbin - Don't execute final_action if failure_action terminates the system - module-setup.sh: Simplify the network setup code - mkdumprd: ensure ssh path exists before check size - module-setup: re-fix 99kdumpbase network dependency - kdumpctl: bail out immediately if host key verification failed * Tue Oct 15 2019 Kairui Song - 2.0.20-5 - Don't mount the dump target unless needed - kdump-lib: strip grub device from kdump_bootdir - Add systemd-udev require. * Tue Sep 24 2019 Kairui Song - 2.0.20-4 - kdumpctl: echo msg when waiting for connection - makedumpfile: Fix inconsistent return value from find_vmemmap() - makedumpfile: Fix exclusion range in find_vmemmap_pages() - makedumpfile: x86_64: Fix incorrect exclusion by -e option with KASLR - kdumpctl: distinguish the failed reason of ssh - kexec-kdump-howto.txt: Add notes about device dump - Disable device dump by default - dracut-module-setup: fix bond ifcfg processing - dracut-module-setup: filter out localhost for generic_fence_kdump - dracut-module-setup: get localhost alias by manual * Mon Aug 12 2019 Kairui Song - 2.0.20-3 - kdumpctl: wait a while for network ready if dump target is ssh - makedumpfile: Increase SECTION_MAP_LAST_BIT to 4 - makedumpfile: Do not proceed when get_num_dumpable_cyclic() fails - Don't forward and drop journalctl logs for fadump * Fri Aug 02 2019 Kairui Song - 2.0.20-2 - x86: Fix broken multiboot2 buliding for i386 - dracut-module-setup.sh: skip alias of localhost in get_pcs_fence_kdump_nodes() * Wed Jul 31 2019 Kairui Song - 2.0.20-1 - Update makedumpfile to 1.6.6 - dracut-module-setup.sh: Don't use squash module for fadump - Forward logs in kdump kernel to console directly - kdump.sysconfig/x86_64: Disable HEST by default - dracut-kdump-capture.service: Use OnFailureJobMode instead of deprecated OnFailureIsolate - makedumpfile: x86_64: Add support for AMD Secure Memory Encryption - aarch64/kdump.sysconfig: Make config options similar to x86_64 - Add aarch64 specific kdump.sysconfig and use 'nr_cpus' instead of 'maxcpus' - kdumpctl: check for ssh path availability when rebuild - kdumpctl: Check kdump.conf for error when rebuild is called * Thu Jul 25 2019 Fedora Release Engineering - 2.0.19-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Mon May 20 2019 Kairui Song - 2.0.19-2 - kdumpctl: don't always rebuild when extra_modules is set - kdumpctl: follow symlink when checking for modified files - Get rid of duplicated strip_comments when reading config - earlykdump: provide a prompt message after the rebuilding of kdump initramfs. - kexec-kdump-howto.txt: Add document about encrypted targets - kexec-kdump-howto.txt: Add document about initramfs rebiuld - kdumpctl: Detect block device driver change for initramfs rebuild - Revert "kdumpctl: Rebuild initramfs if loaded kernel modules changed" - kexec.rules: create dedicated udev rules for ppc64 - kexec-kdump-howto: Add note on setting correct value of kptr_restrict - Update man page for new kdumpctl command: reload / rebuild - kdumpctl: add rebuild support - mkdumprd: Improve the config reading logic * Fri Mar 22 2019 Kairui Song - 2.0.19-1 - Update eppic to latest snapshot - fadump: leverage kernel support to re-regisgter FADump - fadump: use the original initrd to rebuild fadump initrdfrom * Fri Feb 22 2019 Kairui Song - 2.0.18-5 - Update eppic to latest upstream snapshot - Enable building with hardening flags - Remove unused patches - Remove obsolete Group tag - mkdumprd: refine regex on dropping mount options * Fri Feb 01 2019 Fedora Release Engineering - 2.0.18-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Tue Jan 22 2019 Kairui Song - 2.0.18-3 - earlykdump: Add a note of final_action option to avoid crash loop - Add final_action option to kdump.conf - Add failure_action as alias of default and make default obsolete - mkdumprd: force drop earlykdump module - earlykdump: warn when installed kernel version differs from dracut target - earlykdump: add more sanity check when generating initramfs - earlykdump: generate symlink with stable name to kernel image and iniramfs - earlykdump: fix kexec fails to load the early kdump kernel - mkdumprd: allow spaces after 'path' config phrase with network dump setting - dracut-module-setup: Don't build squashed image if required modules are missing - kdump-lib-initramfs.sh: using -force option when poweroff * Fri Dec 7 2018 Kairui Song - 2.0.18-2 - Update makedumpfile 1.6.5 - Make udev reload rules quiet during bootup - dracut-module-setup: Fix routing failure on multipath route - mkdumprd: drop some nfs mount options when reading from kernel - doc/kdump.conf: Local dump path should be //%HOST_IP-%DATE - As /etc/kdump.conf timestamp is updated do not compare it when doing rpm --verify - Add missing usage info * Mon Nov 5 2018 Kairui Song - 2.0.18-1 - Update to kexec-tools 2.0.18 * Thu Nov 1 2018 Kairui Song - 2.0.17-12 - Throttle kdump reload request triggered by udev event - Rewrite kdump's udev rules - kdumpctl: Add reload support * Mon Oct 15 2018 Kairui Song - 2.0.17-11 - Enable dracut squash module - kdumpctl: Print warning in case the raw device is formatted and contains filesystem - kdump-lib-initramfs.sh: Add check to remount to rw mode only if dump target is ro * Wed Aug 22 2018 Kairui Song - 2.0.17-10 - kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error - kdumpctl: Error out if path is set more than once - Always drop nofail or nobootwait options * Tue Aug 07 2018 Kairui Song - 2.0.17-9 - Remove redundant kdump-anaconda-addon source codes - dracut-module-setup: Fix DRM module inclusion test for hyper-v - Remove kdump-anaconda subpackage * Thu Jul 26 2018 Dave Young - 2.0.17-8 - Fix armv7hl build failure * Thu Jul 26 2018 Dave Young - 2.0.17-7 - Remove koji build workaround patch - kexec-tools.spec: Drop kexec-tools-2.0.3-disable-kexec-test.patch - Remove obsolete kdump tool - dracut-module-setup.sh: don't include multipath-hostonly - kdumpctl: Rebuild initramfs if loaded kernel modules changed * Fri Jul 13 2018 Fedora Release Engineering - 2.0.17-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Mon Jul 9 2018 Dave Young - 2.0.17-5 - Update makedumpfile 1.6.4 - dracut-module-setup.sh: pass ip=either6 param for ipv6 - dracut-module-setup.sh: install /etc/hosts when using fence_kdump * Wed Jun 27 2018 Dave Young - 2.0.17-4 - kdump anaconda addon fix for rhbz1594827 * Wed May 30 2018 Dave Young - 2.0.17-3 - Add early kdump support in initramfs. - move some common functions from kdumpctl to kdump-lib.sh - Fix kdumpctl showmem - kdumpctl: Remove 'netroot' and 'iscsi initiator' entries from kdump - kdumpctl: add showmem cmd - Revert "dracut-module-setup.sh: pass correct ip= param for ipv6" * Sat Apr 28 2018 Dave Young - 2.0.17-2 - pull in makedumpfile 1.6.3 * Sat Apr 28 2018 Dave Young - 2.0.17-1 - pull in 2.0.17 * Sun Apr 08 2018 Dave Young - 2.0.16-6 - kdump.sysconfig.ppc64(le): remove "root=" param from ppc64(le) 2nd kernel - kdumpctl: Check the modification time of core_collector - dracut-module-setup.sh: pass correct ip= param for ipv6 * Fri Feb 09 2018 Igor Gnatenko - 2.0.16-5 - Escape macros in %%changelog * Wed Feb 7 2018 Dave Young - 2.0.16-4 - update anaconda addon migrate with Anaconda changes. * Fri Dec 8 2017 Dave Young - 2.0.16-3 - workaround koji build failure (rhbz1520805) * Mon Dec 4 2017 Dave Young - 2.0.16-2 - dracut-module-setup.sh: check whether to include multipath-hostonly or not - Revert "kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors" - kdumpctl: skip selinux-relabel for dracut_args --mount dump target * Tue Nov 21 2017 Dave Young - 2.0.16-1 - update to kexec-tools 2.0.16 * Thu Nov 9 2017 Dave Young - 2.0.15-15 - Use absolute path /usr/bin/dracut in mkdumprd * Wed Oct 11 2017 Dave Young - 2.0.15-14 - kdumpctl: Error out in case there are white spaces before an option name * Wed Sep 6 2017 Dave Young - 2.0.15-13 - dracut-module-setup.sh: eliminate redundant kdump_get_mac_addr call - mkdumprd: use --quiet dracut argument to speedup initramfs build - mkdumprd: fix patterns to modify mount options - fadump: rebuild default initrd with dump capture capability - module-setup: remove software iscsi cmdline generated by dracut - kdumpctl: remove some cmdline inheritage from 1st kernel - mkdumprd: apply dracut "--hostonly-cmdline" and "--no-hostonly-default-device" - Change dump_to_rootfs to use "--mount" instead of "root=X" - kdumpctl: move is_fadump_capable() to kdump-lib.sh - Revert "kdumpctl: use generated rd.lvm.lv=X" - Revert "mkdumprd: omit crypt when there is no crypt kdump target" - Revert "mkdumprd: omit dracut modules in case of no dm target" - Revert "mkdumprd: omit dracut modules in case of network dumping" - update bogus date in rpm spec * Thu Aug 17 2017 Dave Young - 2.0.15-12 - makedumpfile: fix 4.13 kernel larget vmcore bug - Revert "Improve 'cpu add' udev rules" * Tue Aug 15 2017 Dave Young - 2.0.15-11 - Own the /usr/share/makedumpfile dir - Mark COPYING as %%license * Tue Aug 8 2017 Dave Young - 2.0.15-10 - Improve 'cpu add' udev rules - module-setup: suppress the early iscsi error messages - mkdumprd: use 300s as the default systemd unit timeout for kdump mount * Mon Aug 7 2017 Dave Young - 2.0.15-9 - fix makedumpfile bug 1474706 * Thu Aug 03 2017 Fedora Release Engineering - 2.0.15-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Sun Jul 30 2017 Florian Weimer - 2.0.15-7 - Rebuild with binutils fix for ppc64le (#1475636) * Fri Jul 28 2017 Dave Young - 2.0.15-6 - update upstream makedumpfile 1.6.2 * Wed Jul 26 2017 Fedora Release Engineering - 2.0.15-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Wed Jul 19 2017 Dave Young - 2.0.15-4 - mkdumprd: remove useless "x-initrd.mount" - kdumpctl: use "apicid" other than "initial apicid" * Fri Jul 14 2017 Dave Young - 2.0.15-3 - module-setup: fix 99kdumpbase network dependency - mkdumprd: omit dracut modules in case of network dumping - mkdumprd: omit dracut modules in case of no dm target - mkdumprd: omit crypt when there is no crypt kdump target - kdumpctl: use generated rd.lvm.lv=X - mkdumprd: change for_each_block_target() to use get_kdump_targets() - kdump-lib.sh: introduce get_kdump_targets() - kdump-lib.sh: fix improper get_block_dump_target() - kdumpctl: fix infinite loop caused by running under bash * Wed Jun 28 2017 Dave Young - 2.0.15-2 - enable makedumpfile for arm64 * Fri Jun 23 2017 Dave Young - 2.0.15-1 - rebase kexec-tools-2.0.15 * Thu Jun 15 2017 Dave Young - 2.0.14-13 - kexec-tools.spec: Fix whitespace errors - dracut-module-setup: Fix test for inclusion of DRM modules - kdump.conf.5: clarify the fence_kdump_nodes option * Thu May 18 2017 Dave Young - 2.0.14-12 - kdumpctl: for fence_kdump, the ipaddr of this node should be excluded * Fri May 12 2017 Dave Young - 2.0.14-11 - kdumpctl: change the shebang header to use /bin/bash - kdumpctl: call strip_comments only when necessary to speedup - Revert "kdumpctl: improve "while read" time for /etc/kdump.conf" (rhbz1449801) * Fri May 5 2017 Dave Young - 2.0.14-10 - kdumpctl: improve "while read" time for /etc/kdump.conf - kdumpctl: update check_dump_fs_modified() to use "lsinitrd -f" - kdumpctl: improve check_wdt_modified() - kdumpctl: remove is_mode_switched() - kdumpctl: bail out earlier in case of no reserved memory * Thu Apr 27 2017 Dave Young - 2.0.14-9 - kdump: Introduce 'force_no_rebuild' option - kdump-lib-initramfs.sh: ignore the failure of echo - kdump.sysconfig/x86_64: Add nokaslr to kdump kernel cmdline * Tue Apr 11 2017 Dave Young - 2.0.14-8 - kdumpctl: fix status check when CONFIG_CRASH_DUMP is not enabled in kernel - kdumpctl: fix a bug in remove_cmdline_param() - kdumpctl: remove "root=X" for kdump boot - Revert "kdumpctl: filter 'root' kernel parameter when running in live images" * Fri Mar 31 2017 Dave Young - 2.0.14-7 - kdump-emergency: fix "Transaction is destructive" emergency failure - mkdumprd: reduce lvm2 memory under kdump * Fri Mar 17 2017 Dave Young - 2.0.14-6 - Fix kernel kaslr caused regressions (kexec -p and makedumpfile --mem-usage) * Thu Mar 9 2017 Dave Young - 2.0.14-5 - kdump-lib.sh: fix incorrect usage with pipe as input for grep -q in is_pcs_fence_kdump() - Document: fix incorrect link in fadump-how.txt * Mon Jan 23 2017 Dave Young - 2.0.14-4 - drop kdump script rhcrashkernel-param in kexec-tools repo - kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors - kdumpctl: change prepare_cmdline() to operate KDUMP_COMMANDLINE directly - use --hostonly-i18n for dracut * Wed Jan 4 2017 Dave Young - 2.0.14-3 - Rebase makedumpfile 1.6.1 - Delete unused patches * Tue Dec 20 2016 Dave Young - 2.0.14-2 - rebase upstream kexec-tools 2.0.14 - update kdump anaconda addon - cleanup sources file * Mon Nov 28 2016 Dave Young - 2.0.14-1 - kexec-tools 2.0.14-1 * Mon Nov 28 2016 Dave Young - 2.0.13-9 - rename function kdump_to_udev_name - Raw dump: use by-id as persistent policy in 2nd kernel - drop dracut duplicate functions - dracut-kdump: use POSIX shell syntax - Correct two typos in kdumpctl and kdump.conf * Fri Nov 11 2016 Dave Young - 2.0.13-8 - kexec/arch/i386: Add support for KASLR memory randomization - Update kdump anaconda addon - fadump: restore default initrd when fadump mode is disabled - kdump/fadump: fix network interface name when switching from fadump to kdump - kdumpctl: filter 'root' kernel parameter when running in live images - Documentation: step by step guide on confiuring kdump in live images * Thu Oct 27 2016 Dave Young - 2.0.13-7 - fix wrong page_offset added in 2.0.13-6 * Wed Oct 26 2016 Dave Young - 2.0.13-6 - add kexec support for arm64 - support x86 kaslr which is enabled by default in F25 kernel * Fri Sep 16 2016 Dave Young - 2.0.13-5 - Fix bug 1373958 for system boot without initrd - Do not depend on /etc/fstab in kdumpctl in case it does not exist * Fri Aug 26 2016 Dave Young - 2.0.13-4 - Add special dump target "--mount" in dracut_args * Tue Aug 9 2016 Dave Young - 2.0.13-3 - Fix armv7 build failure * Tue Aug 9 2016 Dave Young - 2.0.13-2 - Drop old patches for 2.0.12 * Tue Aug 9 2016 Dave Young - 2.0.13-1 - Rebase kexec-tools 2.0.13 * Thu Jul 21 2016 Dave Young - 2.0.12-10 - kdump.conf manpage and kdump.conf comments fixes. - kdump watchdog support. * Wed Jul 13 2016 Dave Young - 2.0.12-9 - Update kdump anaconda addon - makedumpfile: Support _count -> _refcount rename in struct page - module-setup: Don't handle iBFT in kdump * Wed Jul 6 2016 Dave Young - 2.0.12-8 - Rebase makedumpfile 1.6.0 * Mon Jun 27 2016 Dave Young - 2.0.12-7 - Fix date format in spec file. * Mon Jun 27 2016 Dave Young - 2.0.12-6 - get_persistent_dev(): fix name contention with dracut's similar function * Mon Jun 6 2016 Dave Young - 2.0.12-5 - kdump-lib: Add get_ifcfg_filename() to get the proper ifcfg file - module-setup: Use get_ifcfg_filename() to get the proper ifcfg file * Mon May 30 2016 Dave Young - 2.0.12-4 - update kdump anaconda addon to add mem range in tui - .gitignore: Update to make it more generic - kdumpctl: check_rebuild improvement - kdumpctl: Do not rebuild initramfs when $KDUMP_BOOTDIR is read only * Tue Mar 29 2016 Dave Young - 2.0.12-3 - update kdump anaconda addon to adapt to blivet-2.0 API * Thu Mar 24 2016 Dave Young - 2.0.12-2 - Release 2.0.12-2 - ppc64le: fix kexec hang due to ppc64 elf abi breakage * Tue Mar 22 2016 Dave Young - 2.0.12-1 - Rebase kexec-tools to 2.0.12 * Thu Feb 04 2016 Fedora Release Engineering - 2.0.11-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Fri Dec 11 2015 Dave Young - 2.0.11-3 - use "systemctl reboot -f" for reboot action - Remove kernel param "quiet" from kdump kernel cmdline - kdump.sysconfig: add KDUMP_COMMANDLINE_REMOVE - Add missing prefixes in default sysconfig file - fix bogus date in changelog * Thu Nov 19 2015 Dave Young - 2.0.11-2 - Rebase to upstream makedumpfile 1.5.9 * Mon Nov 9 2015 Dave Young - 2.0.11-1 - Rebase to upstream kexec-tools 2.0.11 * Mon Oct 19 2015 Dave Young - 2.0.10-9 - kexec-kdump-howto:Add introduction of parallel dumping - Remove duplicate prefix path ${initdir} * Tue Sep 8 2015 Dave Young - 2.0.10-8 - update kdump addon to fix a kickstart installationi issue * Wed Aug 19 2015 Dave Young - 2.0.10-7 - add man page for kdumpctl * Thu Aug 13 2015 Baoquan He - 2.0.10-6 - mkdumprd: Remove ifcfg from dracut's modules - module-setup: Choose the first matched gateway in kdump_static_ip - module-setup: Add permanent option to detect static ip address or not * Tue Aug 4 2015 Dave Young - 2.0.10-5 - Update kdump addon to fix an installation hang issue. * Tue Jul 28 2015 Dave Young - 2.0.10-4 - ipv6 support (except for link scope addresses) - Apply the manual DNS to the 2nd kernel - load iTCO_wdt early in cmdline hook * Thu Jul 23 2015 Dave Young - 2.0.10-3 - Update kdump addon icon - Revert static route corner case patches per bhe. He discussed with Marc it is just a corner case. * Mon Jul 13 2015 Dave Young - 2.0.10-2 - update kdump addon icon * Thu Jul 9 2015 Dave Young - 2.0.10-1 - Rebase kexec-tools 2.0.10 - Rebase eppic git tree 050615 - Enhance kdump.conf "default" parameters check * Thu Jul 2 2015 Dave Young - 2.0.9-2 - Resolve bug 1236456, kexec load fail because koji add extra gcc flags. - Remove -FPIC for makedumpfile since it is not necessary without harden build * Tue Jun 23 2015 Dave Young - 2.0.9-1 - Rebase kexec-tools 2.0.9 - Rebase makedumpfile 1.5.8 - revert 6347630 since ipv6 patches has not been reviewed. * Wed Jun 17 2015 Fedora Release Engineering - 2.0.8-13 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Thu Jun 11 2015 Dave Young -2.0.8-13 - Update kdump anaconda addon icon again. * Wed Jun 10 2015 Dave Young -2.0.8-12 - Update kdump anaconda addon, change an icon. * Wed Jun 03 2015 Baoquan He -2.0.8-11 - make kdump work when kernel crash after shutdown - Disable transparent hugepages in second kernel - Filtered out "noauto" options in 2nd kernel fstab * Tue Apr 21 2015 Baoquan He -2.0.8-10 - add fPIC to makefumpfile CFLAGS to support hardening - dracut-module-setup: Enhance kdump to support the bind mounted feature in Atomic - Fix the warning if the target path is bind mount in Atomic - Get the mount point correctly, if the device has several mount point - kdump-lib: Add new function to judge the system is Atomic or not - kdump-lib: Add the new function to enhance bind mounted judgement - Remove duplicate slash in save path * Thu Apr 09 2015 Baoquan He -2.0.8-9 - Revert "execute kdump_post after do_default_action" - dracut-module-setup.sh: change the insecure use of /tmp/*$$* filenames - make kdump saving directory name consistent with RHEL6 * Sun Feb 15 2015 Dave Young - 2.0.8-8 - execute kdump_post after do_default_action - update kdump anaconda addon (translations/help text issus) * Fri Jan 30 2015 Baoquan He - 2.0.8-7 - kdumpctl: adjust the boot dir if kernel is put in sub dir of /boot * Tue Jan 13 2015 WANG Chao - 2.0.8-6 - mount fail if its mount point doesn't exist in /sysroot - rebuild initrd dependency during kdump restart - fix a dump path issue * Tue Jan 06 2015 WANG Chao - 2.0.8-5 - remove panic_on_warn kernel param in 2nd kernel - remove sysctl.conf to restore sysctl default values in 2nd kernel - fix a core_collector issue in ssh and raw dump case - update to kdump-anaconda-addon-005-2-g86366ae.tar.gz - some cleanups * Tue Nov 04 2014 WANG Chao - 2.0.8-4 - Fix ppc64le installation issue - Fix get_option_value function * Tue Oct 28 2014 WANG Chao - 2.0.8-3 - fix static route corner case - fadump fix * Tue Oct 21 2014 WANG Chao - 2.0.8-2 - Fix build issue on ARM * Mon Oct 20 2014 WANG Chao - 2.0.8-1 - Rebase kexec-tools-2.0.8 - Remove subpackage kexec-tools-eppic - Rebase kdump-anaconda-addon-005 * Fri Sep 26 2014 WANG Chao - 2.0.7-11 - Fix build failure on ppc64le - Fix an issue on iscsi boot environment * Tue Sep 23 2014 WANG Chao - 2.0.7-10 - Enable ppc64le arch. - Rebase makedumpfile-1.5.7 - add sample eppic scripts to kexec-tools-eppic package - Restart kdump service on cpu ADD/REMOVE events * Wed Sep 10 2014 Baoquan He - 2.0.7-9 - kdumpctl: Use kexec file based syscall for secureboot enabled machines - kdumpctl: Use kexec file based mode to unload kdump kernel - kdumpctl: Do not redirect error messages to /dev/null - kexec: Provide an option to use new kexec system call * Fri Aug 29 2014 WANG Chao - 2.0.7-8 - use absolute path for executable in systemd service - update to kdump-anaconda-addon-003 - remove dead kdump firstboot module and po files * Thu Aug 21 2014 WANG Chao - 2.0.7-7 - install 98-kexec.rules to /usr/lib/ - update kdump-anaconda-addon-0.2 * Sat Aug 16 2014 Fedora Release Engineering - 2.0.7-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Wed Aug 06 2014 WANG Chao - 2.0.7-5 - rework of kdump error handling - add fadump support - add static route support - systemd will take care of shutdown and umount filesystems * Thu Jul 24 2014 WANG Chao - 2.0.7-4 - update to kdump-anaconda-addon-001-4-g03898ef.tar.gz - prefix "kdump-" to eth name * Mon Jul 21 2014 WANG Chao - 2.0.7-3 - update to kdump-anaconda-addon-20140721.tar.gz * Wed Jul 16 2014 WANG Chao - 2.0.7-2 - Fix makedumpfile OOM issue * Tue Jun 10 2014 WANG Chao - 2.0.7-1 - Rebase kexec-tools-2.0.7 * Sun Jun 08 2014 Fedora Release Engineering - 2.0.6-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Thu May 22 2014 WANG Chao - 2.0.6-8 - re-construct anaconda-addon file hierarchy * Wed May 21 2014 WANG Chao - 2.0.6-7 - fix a typo in kexec-tools.spec * Tue May 20 2014 WANG Chao - 2.0.6-6 - New package kdump-anaconda-addon - fixes for udev event based service restart * Wed Apr 30 2014 WANG Chao - 2.0.6-5 - Remove nofail mount option - Rebase makedumpfile-1.5.6 * Thu Apr 17 2014 WANG Chao - 2.0.6-4 - generate kdump service dependencies on the fly - kdump.conf: a standalone path directive becomes a relative path to it's backed disk. * Wed Apr 02 2014 WANG Chao - 2.0.6-3 - Add README to git repo - Add fence_kdump support for generic clusters * Thu Mar 27 2014 Peter Robinson 2.0.6-2 - Exclude AArch64 * Wed Mar 26 2014 WANG Chao - 2.0.6-1 - Rebase kexec-tools-2.0.6 - fix an issue when dump path is mounted on nfs - vmcore-dmesg: stack smashing fix - get_ssh_size fix for localized df output * Mon Mar 10 2014 WANG Chao - 2.0.5-2 - Warn about save vmcore patch mounted by another disk - Omit dracut resume module * Tue Mar 04 2014 WANG Chao - 2.0.5-1 - Rebase kexec-tools-2.0.5 - backport several patches from upstream for i386 build * Mon Mar 03 2014 WANG Chao - 2.0.4-25 - Pass disable_cpu_apicid to kexec of capture kernel - Relax restriction of dumping on encrypted target - regression fix on wdt kernel drivers instal * Mon Feb 17 2014 WANG Chao - 2.0.4-24 - add kdump-in-cluster-environment.txt to rpm pkg - Secure Boot status check warning - Some watchdog driver support * Wed Jan 29 2014 WANG Chao - 2.0.4-23 - ssh dump: create random-seed manually - makedumpfile: memset() in cyclic bitmap initialization introduce segment fault. - Add acpi_no_memhotplug to kdump kernel - Add fence kdump support * Tue Jan 28 2014 WANG Chao - 2.0.4-22 - Rebase makedumpfile-1.5.5 * Wed Jan 22 2014 WANG Chao - 2.0.4-21 - makedumpfile: Improve progress information for huge memory system - s390: use nr_cpus=1 instead of maxcpus=1 * Fri Jan 17 2014 WANG Chao - 2.0.4-20 - vmcore-dmesg: fix timestamp error in vmcore-dmesg.txt - makedumpfile: re-enable mmap() and introduce --non-mmap - kdump.conf uncomment default core_collector line - fix an issue when 'ssh' directive appearing in kdump.conf, the rest part of lines in this file are ignored * Tue Dec 24 2013 WANG Chao - 2.0.4-18 - update translation files - makedumpfile: default to lzo compression - makedumpfile: add makedumpfile.conf.sample and its manpage * Sat Dec 21 2013 Ville Skyttä - 2.0.4-15 - Fix Tamil (India) locale subdir name. - Fix bogus date in %%changelog. * Tue Dec 03 2013 WANG Chao - 2.0.4-14 - Add rd.memdebug in kdump module - kdumpctl: Avoid leaking fd to subshell - makedumpfile: Understand >= v3.11-rc4 dmesg - makedumpfile, ppc: Support to filter dump for kernels that use CONFIG_SPARSEMEM_VMEMMAP. * Fri Nov 15 2013 WANG Chao - 2.0.4-13 - makedumpfile: disable mmap() * Tue Oct 29 2013 WANG Chao - 2.0.4-12 - fix sadump format phys_base calculating error - kdump, x86: Process multiple Crash kernel in /proc/iomem - makedumpfile: wrong cyclic buffer size recalculation causes bitmap data corruption - Fix max_mapnr issue on system has over 44-bit addressing. * Sat Oct 12 2013 Baoquan He -2.0.4-11 - kdump-lib.sh: strip_comments is not implemented correcty * Fri Sep 27 2013 Baoquan He - 2.0.4-10 - Back port 2 revert commits - kdump.sysconfig: default to "nofail" mount * Fri Sep 27 2013 Baoquan He - 2.0.4-9 - Strip inline comments from the kdump config file before use - kdump-lib.sh: add common function strip_comments - Introduce kdump-lib.sh for kdump shared functions - kdump.service: Start kdump after network is online and remote fs is mounted - dracut-module-setup: _dev to be a local variable - kdumpctl: Run multiple kdumpctl instances one by one in serial order * Wed Aug 21 2013 Baoquan He - 2.0.4-8 - remove 98selinux dependency * Fri Aug 2 2013 Baoquan He - 2.0.4-7 - dracut-kdump.sh: add do_dump() and error out if dump vmcore fails - dracut-module-setup.sh: setup correct system time and time zone in 2nd kernel. - kernel cmdline: Remove hugepage allocations - Use /lib/dracut/no-emergency-shell to control action on fail - Revert: kdump.sysconfig: Add option action_on_fail and set its default as continue - dracut-kdump.sh: Redirect kdump script stdout/stderr to /dev/console - makedumpfile: Add vmap_area_list definition for ppc/ppc64. * Fri Jul 12 2013 Baoquan He - 2.0.4-6 - add snappy build - add lzo build - pull makedumpfile-1.5.4 - mkdumprd: check return value of subshell - mkdumprd: get_persistent_dev() return original dev if no persistent dev exists. - dracut-kdump.sh: Merge dump_to_rootfs() to dump_fs() - dracut-kdump.sh: explicitly sync after each dump - Correct wrong weekday of changelog - kexec-tools.spec: Remove incorrect description in changelog * Tue Jun 25 2013 Baoquan He - 2.0.4-5 - monitor-dd-progress fix - rawdump: only show dd progress bar when core_collector is not makedumpfile - kexec-tools.spec: replaces scriptlets with new systemd macros - dracut-kdump.sh: umount fs right before kdump exit - dracut-kdump.sh: recursively umount fs and its submounts - dracut-kdump.sh: cleanup - using local variable names instead of $1/$2 in functions - dracut-kdump.sh: name the invalid vmcore to vmcore-incomplete - dracut-kdump.sh: Output top level information about the kdump progress. - kexec-kdump-howto: Add a section for debugging tips * Tue Jun 18 2013 Baoquan He - 2.0.4-4 - dracut-module-setup.sh: improve the approach to get a bridged interface list - dracut-module-setup.sh: cleanup - use kdump_get_mac_addr() function - dracut-module-setup.sh: use kernel exported mac address in kdump_get_mac_addr() - dracut-module-setup.sh: use perm addr of slaves to setup bonding network - kdump: Do not output debug messages by default - dracut-module-setup.sh: kdump module depends on drm module - mkdumprd: return error if no write permission on save path of server for ssh * Thu Jun 13 2013 Baoquan He - 2.0.4-3 - mkdumprd: remove -M option for dracut - kdumpctl: add selinux relabel when service startup - depends on dracut selinux module - dracut-kdump.sh: umount rootfs after dump_to_rootfs - kdump.sysconfig: append "panic=10" to kdump cmdline - kexec-kdump-howto: grubby is suggested modifing kernel cmdline - kexec-tools.spec: removes kexec udev rules for s390 - kdump.sysconfig: Add option action_on_fail and set its default as continue - Add tab key as delimiter for core_collector in kdump.conf - redirect stdout to stderr * Tue May 14 2013 Baoquan He - 2.0.4-2 - kdump: Save vmcore-dmesg.txt before saving vmcore - Remove "ip=" overwrite to 40ip.conf - Add support for bridge over bond/team/vlan. - Fix bonding options syntax and get all specified options from ifcfg file. - add dracut_args option to kdump.conf - kexec-tools.spec: Add ethtool to dependency. - error out if dump target is encrypted * Wed Apr 3 2013 Baoquan He - 2.0.4-1 - Delete several patches which have been merged into kexec-tools-2.0.4 - Revert: Release 2.0.3-72 - Release 2.0.3-72 - Pull kexec-tools-2.0.4 - Check if block device as dump target is resettable - mkdumprd: add function perror_exit - Deprecate blacklist option * Wed Mar 27 2013 Baoquan He - 2.0.3-71 - Remove eppic support on ppc and s390 arch * Mon Mar 18 2013 Baoquan He - 2.0.3-70 - Change rules related to eppic in kexec-tools.spec * Thu Mar 14 2013 Baoquan He - 2.0.3-69 - Support for eppic language as a subpackage * Thu Mar 14 2013 Baoquan He - 2.0.3-68 - tune sysconfig to save memory usage - Remove useless codes related to LOGGER in kdumpctl - kdumpctl:print out the service status - Return to start() function when check_ssh_target failed - use findmnt instead of blkid in mkdumprd - check dump target mounting earlier - kdumpctl: rename function name check_config - add function to check kdump config file - dracut-module-setup.sh: remove UUID/LABEL quotes before using it - Change dump_to_rootfs to be a default option and reboot to be default action - Remove "-F" in CORE_COLLECTOR when dump_to_rootfs * Tue Feb 19 2013 Baoquan He - 2.0.3-67 - Remove comma which is redundant - Modify codes related to dump dir to make it clearer - Rectify the get_host_ip implementation - Revert: Merge an upstream patch for fix a ppc64 makedumpfile bug with with CONFIG_SPARSEMEM_EXTREME - pull makedumpfile 1.5.3 * Tue Feb 5 2013 Dave Young - 2.0.3-66 - Spec: remove kdump image when a corresponding kernel is removed - Merge an upstream patch for fix a ppc64 makedumpfile bug * Mon Jan 28 2013 Dave Young - 2.0.3-65 - Add support for team devices - Update translation file po/it.po - remove wait for net ok function - add bootdev cmdline param - kdumpnic cmdline file name cleanup * Fri Jan 4 2013 Dave Young - 2.0.3-64 - fix issue of exec on stack for ppc32 * Fri Dec 21 2012 Dave Young - 2.0.3-63 - revert explictly handling of PIPESTATUS - enable pipefail bash option - wrong ssh key fix - build fix: Update 3 po files: po/gu.po po/or.po po/zh_CN.po * Fri Dec 21 2012 Dave Young - 2.0.3-62 - Pull translated po files from zanata - Optimize redundent code fetching server of network dump - change the dump dir format to be more readable * Wed Dec 12 2012 Dave Young - 2.0.3-61 - firstboot:fix reserve mem ui spinbox step size - handle readonly mounted filesystem * Mon Dec 10 2012 Dave Young - 2.0.3-60 - makedumpfile 1.5.1 - Update po tar.gz - Add a notes for zanata process - Add two xmls file for po zanata translation - Cleanup and recreate po files * Fri Nov 16 2012 Dave Young - 2.0.3-59 - Enable kdump service after installation - get MEM_RESERVED from sysfs attribute - get_ssh_size: use -n to redirect stdin from /dev/null - add random feeding code for ssh dump - kdump option space checking improvement - kdumpctl: multi dump target checking fix * Thu Oct 25 2012 Dave Young - 2.0.3-58 - pull in two upstream patches * Thu Oct 11 2012 Dave Young - 2.0.3-57 - improve persistent name handling * Sat Sep 29 2012 Dave Young - 2.0.3-56 - Pull vmcore-dmesg patches from vivek - ppc/ppc64: compile purgatory with gcc option msoft-float - Update to support f18 grub2 efi config file - pass persistent name to dracut --device - pass persistent name to dracut --mount - use persistent name in kdump.conf of initramfs - mkdumprd: add function get_persistent_dev - remove useless uuid and label handling * Thu Sep 06 2012 Dave Young - 2.0.3-55 - doc fix for mount dump target before mkdumprd - pull makedumpfile 1.5.0 * Wed Aug 29 2012 Dave Young - 2.0.3-54 - pass raw device as dracut argument - iscsi setup fix - firstboot: add automatic and manual memory reservation for rhel - firstboot: remove unnecessary underline shortkey - firstboot: fix gtk warning about non-zero page size - firstboot: update all kernels config in grubbyCmd - firstboot: add actual reserved memory widget - firstboot code cleanup - rhcrashkernel-param: echo crashkernel=auto for rhel7 - Remove the kernel-kdump handling - s390x firstboot fix - remove elilo support - grub2 fix in firstboot - Take closing the reboot dialog as no - Handle new crashkernel= syntax in firstboot - Fix a localized string in firstboot - Configure kdump in firstboot - fix firstboot to ensure kdump svc is disabled properly - firstboot text domain fix - Update to use systemctl instead of sysv chkconfig - port force_rebuild kdump.conf option - Change return value to indicate the result of dump_raw() correctly. - call dracut function for default shell * Mon Jul 23 2012 Dave Young - 2.0.3-53 - refactor net option - use fstab-sys to mount nfs - rename function dump_localfs - dump_localfs error path fix - update kexec-kdump-howto.txt about systemctl commands - ssh propagate alert message fix - remove useless dracut cmdline '-c /dev/null' - remove useless dracut cmdline for kernel-modules and kdumpbase - install core_collector in module-setup.sh - install extra_bins in module-setup.sh - remove busybox dependency - improve warning message of space checking - do not mount root twice - do not add fstab-sys module in dracut cmdline - omit dash module - network dns config fix - shell exit value fix * Thu Jul 19 2012 Fedora Release Engineering - 2.0.3-52 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Thu Jul 5 2012 Dave Young - 2.0.3-51 - add s390x netdev setup - Add s390x support - Cleanup temp file leaved at /tmp/ - add check_size function for fs dump - add ssh check_size - blacklist patch apply fix - Respect bonding mode - Support dump over vlan tagged bonding * Fri Jun 22 2012 Dave Young - 2.0.3-50 - add blacklist option, Resolves: bz805774 - Add kdump_post and kdump_pre support, Resolves: bz805773 - Port check_config from rhel6, Resolves: bz805778 - raw core_collector fix - ssh core_collector fix - drcut-kdump.sh: cleanup kdump.conf check * Tue Jun 12 2012 Dave Young - 2.0.3-49 - cleanup DUMP_INSTRUCTION handling - final reboot behavior fix - dump_rootfs for default target fix - add vlan support - fix and refactor bond handling code - fix and refactor bridge handling code - core_collector doc basic fix - omit plymouth module, Resolves: bz821997 - mkdumprd manpage cleanup manpage - mkdumprd: remove --debug - mkdumprd: remove noconf - makedumprd: remove -d - kdump.conf add sshkey - kdump.conf remove disk_timeout - kdump.conf make path uncommented - kdump.conf.5 add default poweroff - kdump.conf default shell fix - kdump.conf default default action fix - kdump.conf.5 remove module option - kdump.conf remove kdump_pre/kdump_post - kdump.conf: remove link_delay * Mon May 28 2012 Dave Young - 2.0.3-48 - do_default_action cleanup, Resolves: bz805773 - add rhcrashkernel-param for anaconda use, Resolves: bz707441 - Basic iscsi target dump support (software initiator), Resolves bz822701 - Static ip configuratio support, Resolves: bz822739 - udev rules fix, Resolves: bz808817 * Thu May 3 2012 Dave Young - 2.0.3-47 - remove dracut-files.tgz2 * Wed May 2 2012 Dave Young - 2.0.3-46 - mkdumprd: Start using --hostonly and --add kdumpbase while calling dracut - get_mp function cleanup - move kdump script order to the end of pre pivot - port raw dump from rhel6 - remove multi dump * Mon Apr 23 2012 Dave Young - 2.0.3-45 - update dracut-files.tbz2 * Thu Apr 19 2012 Dave Young - 2.0.3-44 - update ppc64 sysconfig, resolve bug 811449 - deal with nic rename issue, resolve bug 810107 - update x86_64 sysconfig, resolve bug 813711 * Wed Apr 11 2012 Cong Wang - 2.0.3-43 - variable name fix from Dave Young. * Fri Mar 30 2012 Cong Wang - 2.0.3-42 - get ip addr with getent - spec: depends on dracut-network - Handle net option for nfs in kdump.conf correctly * Mon Feb 27 2012 Cong Wang - 2.0.3-41 - Bump this version. * Wed Feb 22 2012 Cong Wang - 2.0.2-40 - Fixup sysytemd service file. * Wed Feb 22 2012 Dave Young - 2.0.2-39 - Add ssh dump support, resolve bug 789253. * Fri Jan 27 2012 Cong Wang - 2.0.2-38 - Pull the latest makedumpfile release, 1.4.2. * Fri Jan 27 2012 Cong Wang - 2.0.2-37 - Add initial NFS dump support, experimental. * Wed Jan 25 2012 Cong Wang - 2.0.2-36 - Really upload the dracut module. * Wed Jan 25 2012 Cong Wang - 2.0.2-35 - Fix various bugs for nfs dump. * Wed Jan 25 2012 Cong Wang - 2.0.2-34 - kdump.sh cleanup for fstab handling, from Dave Young. * Wed Jan 25 2012 Cong Wang - 2.0.2-33 - Handle rootfs correctly. * Tue Jan 10 2012 Cong Wang - 2.0.2-32 - Fix add_dracut_arg in mkdumprd. * Tue Jan 10 2012 Cong Wang - 2.0.2-31 - Update kdump dracut module with the latest dracut kdump branch. * Fri Dec 16 2011 Cong Wang - 2.0.2-30 - Update kdump dracut module to use the latest dracut feature. * Fri Sep 9 2011 Tom Callaway - 2.0.2-29 - fix systemd scriptlets * Wed Sep 7 2011 Cong Wang - 2.0.2-28 - Rename mkdumprd2 to mkdumpramfs. * Wed Aug 31 2011 Cong Wang - 2.0.2-27 - Add debug_mem_level debugging option, from Jan Stancek. Resolve Bug 731395. * Mon Aug 15 2011 Cong Wang - 2.0.2-26 - Fix several issues caused by the previous revert. * Mon Aug 15 2011 Cong Wang - 2.0.2-25 - Switch back to old mkdumprd and also keep the new one. * Tue Aug 2 2011 Cong Wang - 2.0.2-24 - Fix default action handling. * Tue Aug 2 2011 Cong Wang - 2.0.2-23 - Install modified kdump.conf in initrd. * Tue Aug 2 2011 Cong Wang - 2.0.2-22 - Handle lvm in pre-pivot hook. * Tue Aug 2 2011 Cong Wang - 2.0.2-21 - Fix udev rules in module-setup.sh * Mon Aug 1 2011 Cong Wang - 2.0.2-20 - Generate udev rules in module-setup.sh * Mon Aug 1 2011 Cong Wang - 2.0.2-19 - Generate udev rules to handle device names. * Mon Aug 1 2011 Cong Wang - 2.0.2-18 - Fix dump to local filesystem and raw dump. * Mon Aug 1 2011 Cong Wang - 2.0.2-17 - Depend on dracut-network. * Mon Aug 1 2011 Cong Wang - 2.0.2-16 - Move dracut module detection code to module-setup.sh. * Thu Jul 28 2011 Cong Wang - 2.0.2-15 - Use shutdown module of dracut to handle reboot/shutdown/halt. * Wed Jul 27 2011 Cong Wang - 2.0.2-14 - Wait for loginit. * Wed Jul 27 2011 Cong Wang - 2.0.2-13 - Use absolute path of reboot/halt/poweroff. * Wed Jul 27 2011 Cong Wang - 2.0.2-12 - Don't use consolehelper, use real reboot/halt/poweroff. * Wed Jul 27 2011 Cong Wang - 2.0.2-11 - Rename initrd to initramfs. * Wed Jul 27 2011 Cong Wang - 2.0.2-10 - Don't depend on busybox, as it doesn't save much space. * Tue Jul 26 2011 Cong Wang - 2.0.2-9 - Parse default action. * Mon Jul 25 2011 Cong Wang - 2.0.2-8 - Move path/core_collector/default parsing code to initrd. * Mon Jul 25 2011 Cong Wang - 2.0.2-7 - Remove obsolete code in kdumpctl. * Mon Jul 25 2011 Cong Wang - 2.0.2-6 - Support core_collector and extran_bins. * Thu Jul 21 2011 Cong Wang - 2.0.2-5 - Bypass '-d' option. * Thu Jul 21 2011 Cong Wang - 2.0.2-4 - Update initramfs infrastructure to make it working with dracut. * Wed Jul 06 2011 Neil Horman - 2.0.2-3 - Removed sysv init script from package * Mon Jul 04 2011 Neil Horman - 2.0.2-2 - Added systemd unit file (bz 716994) * Fri Jun 24 2011 Neil Horman - 2.0.2-1 - Updated to upstream version 2.0.2 * Thu Jun 02 2011 Neil Horman - 2.0.0-47 - Fixed misuse of readlink command after directory change (bz 710744) * Tue Apr 26 2011 Neil Horman - 2.0.0-46 - Fix some grammer in man page (bz 673817) * Mon Mar 28 2011 Neil Horman - 2.0.0-45 - Fix misuse of basename in mkdumprd (bz 683769) * Thu Mar 10 2011 Neil Horman - 2.0.0-44 - Fix build break in purgatory makefile * Thu Mar 10 2011 Neil Horman - 2.0.0-43 - Remove vestigual emitdms code and call from mkdumprd * Mon Feb 07 2011 Fedora Release Engineering - 2.0.0-42 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Fri Oct 22 2010 Neil Horman - 2.0.0-41 - Fixed dhcp retry mechanism (bz 645734) * Wed Sep 29 2010 jkeating - 2.0.0-40 - Rebuilt for gcc bug 634757 * Wed Sep 22 2010 Neil Horman - 2.0.0-39 - fix finding modalias/mkdumprd hang (bz 635893) * Wed Aug 11 2010 David Malcolm - 2.0.0-38 - recompiling .py files against Python 2.7 (rhbz#623327) * Sun Jun 13 2010 Lubomir Rintel - 2.0.0-37 - Fix a syntax error in kdump init script * Sun Jun 13 2010 Lubomir Rintel - 2.0.0-36 - Cosmetic mkdumprd fixes (drop an unused function, streamline another) * Sat May 29 2010 CAI Qian - 2.0.0-35 - Forward-port from F13 - Fixed kernel text area search in kcore (bz 587750) * Sat May 29 2010 CAI Qian - 2.0.0-34 - Massive forward-port from RHEL6 - Update kexec-kdump-howto.txt - Update docs to reflect use of ext4 - Update mkdumprd to pull in all modules needed - Fix mkdumprd typo - Removed universal add of ata_piix from mkdumprd - Fix infinite loop from modprobe changes - Fixed kexec-kdump-howto.doc for RHEL6 - Update makedumpfile to 1.3.5 - Improved mkdumprd run time - Cai's fix for broken regex - Fixing crashkernel syntax parsing - Fix initscript to return proper LSB return codes - Fixed bad call to resolve_dm_name - Added poweroff option to mkdumprd - Fixed readlink issue - Fixed x86_64 page_offset specifictaion - Fixed lvm setup loop to not hang - Added utsname support to makedumpfile for 2.6.32 - Fix critical_disks list to exclude cciss/md - Add help info for -b option - Add ability to handle firmware hotplug events - Update mkdumprd to deal with changes in busybox fsck - Vitaly's fix to detect need for 64 bit elf - Fix major/minor numbers on /dev/rtc - Fix ssh id propogation w/ selinux - Add blacklist feature to kdump.conf - Removed rhpl code from firstboot - Fixed firstboot enable sense - Remove bogus debug comment from mkdumprd. - Handle SPARSEMEM properly - Fix scp monitoring script - Fix firstboot to find grub on EFI systems - Fixed mkdumprd to remove dup insmod - Fixed kdump fsck pause - Fixed kdump option handling - fixed raid5 module detection * Thu Mar 11 2010 Neil Horman - 2.0.0-33 - Remove nash references from mkdumprd * Wed Feb 17 2010 Neil Horman - 2.0.0-32 - Fixed spec file error * Wed Feb 17 2010 Neil Horman - 2.0.0-31 - Adding kdump.conf man page - Adding disk timeout parameter (bz 566135) * Tue Dec 01 2009 Neil Horman - 2.0.0-30 - Fix raid support in mkdumprd (bz 519767) * Mon Nov 23 2009 Neil Horman - 2.0.0-29 - Updating firstboot script to RHEL-6 version (bz 539812) * Fri Nov 06 2009 Neil Horman - 2.0.0-28 - Added abrt infrastructure to kdump init script (bz 533370) * Tue Sep 15 2009 Neil Horman - 2.0.0-27 - Fixing permissions on dracut module files * Fri Sep 11 2009 Neil Horman - 2.0.0-26 - Rebuild for translation team (bz 522415) * Thu Sep 10 2009 Neil Horman - 2.0.0-25 - Fix dracut module check file (bz 522486) * Thu Aug 13 2009 Neil Horman - 2.0.0-24 - update kdump adv conf init script & dracut module * Wed Jul 29 2009 Neil Horman - 2.0,0-23 - Remove mkdumprd2 and start replacement with dracut * Fri Jul 24 2009 Fedora Release Engineering - 2.0.0-22 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Mon Jul 06 2009 Neil Horman 2.0.0-21 - Fixed build break * Mon Jul 06 2009 Neil Horman 2.0.0-20 - Make makedumpfile a dynamic binary * Mon Jul 06 2009 Neil Horman 2.0.0-19 - Fix build issue * Mon Jul 06 2009 Neil Horman 2.0.0-18 - Updated initscript to use mkdumprd2 if manifest is present - Updated spec to require dash - Updated sample manifest to point to correct initscript - Updated populate_std_files helper to fix sh symlink * Mon Jul 06 2009 Neil Horman 2.0.0-17 - Fixed mkdumprd2 tarball creation * Tue Jun 23 2009 Neil Horman 2.0.0-16 - Fix up kdump so it works with latest firstboot * Mon Jun 15 2009 Neil Horman 2.0.0-15 - Fixed some stat drive detect bugs by E. Biederman (bz505701) * Wed May 20 2009 Neil Horman 2.0.0-14 - Put early copy of mkdumprd2 out in the wild (bz 466392) * Fri May 08 2009 Neil Horman - 2.0.0-13 - Update makedumpfile to v 1.3.3 (bz 499849) * Tue Apr 07 2009 Neil Horman - 2.0.0-12 - Simplifed rootfs mounting code in mkdumprd (bz 494416) * Sun Apr 05 2009 Lubomir Rintel - 2.0.0-11 - Install the correct configuration for i586 * Fri Apr 03 2009 Neil Horman - 2.0.0-10 - Fix problem with quoted CORE_COLLECTOR string (bz 493707) * Thu Apr 02 2009 Orion Poplawski - 2.0.0-9 - Add BR glibc-static * Wed Feb 25 2009 Fedora Release Engineering - 2.0.0-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Thu Dec 04 2008 Ignacio Vazquez-Abrams - 2.0.0-7 - Rebuild for Python 2.6 * Mon Dec 01 2008 Neil Horman - 2.0.0.6 - adding makedumpfile man page updates (bz 473212) * Mon Dec 01 2008 Ignacio Vazquez-Abrams - 2.0.0-5 - Rebuild for Python 2.6 * Wed Nov 05 2008 Neil Horman - 2.0.0-3 - Correct source file to use proper lang package (bz 335191) * Wed Oct 29 2008 Neil Horman - 2.0.0-2 - Fix mkdumprd typo (bz 469001) * Mon Sep 15 2008 Neil Horman - 2.0.0-2 - Fix sysconfig files to not specify --args-linux on x86 (bz 461615) * Wed Aug 27 2008 Neil Horman - 2.0.0-1 - Update kexec-tools to latest upstream version * Wed Aug 27 2008 Neil Horman - 1.102pre-16 - Fix mkdumprd to properly use UUID/LABEL search (bz 455998) * Tue Aug 5 2008 Tom "spot" Callaway - 1.102pre-15 - fix license tag * Mon Jul 28 2008 Neil Horman - 1.102pre-14 - Add video reset section to docs (bz 456572) * Fri Jul 11 2008 Neil Horman - 1.102pre-13 - Fix mkdumprd to support dynamic busybox (bz 443878) * Wed Jun 11 2008 Neil Horman - 1.102pre-12 - Added lvm to bin list (bz 443878) * Thu Jun 05 2008 Neil Horman - 1.102pre-11 - Update to latest makedumpfile from upstream - Mass import of RHEL fixes missing in rawhide * Thu Apr 24 2008 Neil Horman - 1.102pre-10 - Fix mkdumprd to properly pull in libs for lvm/mdadm (bz 443878) * Wed Apr 16 2008 Neil Horman - 1.102pre-9 - Fix cmdline length issue * Tue Mar 25 2008 Neil Horman - 1.102pre-8 - Fixing ARCH definition for bz 438661 * Mon Mar 24 2008 Neil Horman - 1.102pre-7 - Adding patches for bz 438661 * Fri Feb 22 2008 Neil Horman - 1.102pre-6 - Bringing rawhide up to date with bugfixes from RHEL5 - Adding patch to prevent kexec buffer overflow on ppc (bz 428684) * Tue Feb 19 2008 Neil Horman - 1.102pre-5 - Modifying mkdumprd to include dynamic executibles (bz 433350) * Tue Feb 12 2008 Neil Horman - 1.102pre-4 - bumping rev number for rebuild * Wed Jan 02 2008 Neil Horman - 1.102pre-3 - Fix ARCH placement in kdump init script (bz 427201) - Fix BuildRequires - Fix Makedumpfile to build with new libelf * Mon Oct 01 2007 Neil Horman - 1.102pre-2 - Fix triggerpostun script (bz 308151) * Thu Aug 30 2007 Neil Horman - 1.102pre-1 - Bumping kexec version to latest horms tree (bz 257201) - Adding trigger to remove initrds when a kernel is removed * Wed Aug 22 2007 Neil Horman - 1.101-81 - Add xen-syms patch to makedumpfile (bz 250341) * Wed Aug 22 2007 Neil Horman - 1.101-80 - Fix ability to determine space on nfs shares (bz 252170) * Tue Aug 21 2007 Neil Horman - 1.101-79 - Update kdump.init to always create sparse files (bz 253714) * Fri Aug 10 2007 Neil Horman - 1.101-78 - Update init script to handle xen kernel cmdlnes (bz 250803) * Wed Aug 01 2007 Neil Horman - 1.101-77 - Update mkdumprd to suppres notifications /rev makedumpfile (bz 250341) * Thu Jul 19 2007 Neil Horman - 1.101-76 - Fix mkdumprd to suppress informative messages (bz 248797) * Wed Jul 18 2007 Neil Horman - 1.101-75 - Updated fr.po translations (bz 248287) * Tue Jul 17 2007 Neil Horman - 1.101-74 - Fix up add_buff to retry locate_hole on segment overlap (bz 247989) * Mon Jul 09 2007 Neil Horman - 1.101-73 - Fix up language files for kexec (bz 246508) * Thu Jul 05 2007 Neil Horman - 1.101-72 - Fixing up initscript for LSB (bz 246967) * Tue Jun 19 2007 Neil Horman - 1.101-71 - Fixed conflict in mkdumprd in use of /mnt (bz 222911) * Mon Jun 18 2007 Neil Horman - 1.101-70 - Fixed kdump.init to properly read cmdline (bz 244649) * Wed Apr 11 2007 Neil Horman - 1.101-69 - Fixed up kdump.init to enforce mode 600 on authorized_keys2 (bz 235986) * Tue Apr 10 2007 Neil Horman - 1.101-68 - Fix alignment of bootargs and device-tree structures on ppc64 * Tue Apr 10 2007 Neil Horman - 1.101-67 - Allow ppc to boot ppc64 kernels (bz 235608) * Tue Apr 10 2007 Neil Horman - 1.101-66 - Reduce rmo_top to 0x7c000000 for PS3 (bz 235030) * Mon Mar 26 2007 Neil Horman - 1.101-65 - Fix spec to own kexec_tools directory (bz 219035) * Wed Mar 21 2007 Neil Horman - 1.101-64 - Add fix for ppc memory region computation (bz 233312) * Thu Mar 15 2007 Neil Horman - 1.101-63 - Adding extra check to avoid oom kills on nfs mount failure (bz 215056) * Tue Mar 06 2007 Neil Horman - 1.101-62 - Updating makedumpfile to version 1.1.1 (bz 2223743) * Thu Feb 22 2007 Neil Horman - 1.101-61 - Adding multilanguage infrastructure to firstboot_kdump (bz 223175) * Mon Feb 12 2007 Neil Horman - 1.101-60 - Fixing up file permissions on kdump.conf (bz 228137) * Fri Feb 09 2007 Neil Horman - 1.101-59 - Adding mkdumprd man page to build * Thu Jan 25 2007 Neil Horman - 1.101-58 - Updating kdump.init and mkdumprd with most recent RHEL5 fixes - Fixing BuildReq to require elfutils-devel-static * Thu Jan 04 2007 Neil Horman - 1.101-56 - Fix option parsing problem for bzImage files (bz 221272) * Fri Dec 15 2006 Neil Horman - 1.101-55 - Wholesale update of RHEL5 revisions 55-147 * Tue Aug 29 2006 Neil Horman - 1.101-54 - integrate default elf format patch * Tue Aug 29 2006 Neil Horman - 1.101-53 - Taking Viveks x86_64 crashdump patch (rcv. via email) * Tue Aug 29 2006 Neil Horman - 1.101-52 - Taking ia64 tools patch for bz 181358 * Mon Aug 28 2006 Neil Horman - 1.101-51 - more doc updates - added patch to fix build break from kernel headers change * Thu Aug 24 2006 Neil Horman - 1.101-50 - repo patch to enable support for relocatable kernels. * Thu Aug 24 2006 Neil Horman - 1.101-49 - rewriting kcp to properly do ssh and scp - updating mkdumprd to use new kcp syntax * Wed Aug 23 2006 Neil Horman - 1.101-48 - Bumping revision number * Tue Aug 22 2006 Jarod Wilson - 1.101-47 - ppc64 no-more-platform fix * Mon Aug 21 2006 Jarod Wilson - 1.101-46 - ppc64 fixups: - actually build ppc64 binaries (bug 203407) - correct usage output - avoid segfault in command-line parsing - install kexec man page - use regulation Fedora BuildRoot * Fri Aug 18 2006 Neil Horman - 1.101-45 - fixed typo in mkdumprd for bz 202983 - fixed typo in mkdumprd for bz 203053 - clarified docs in kdump.conf with examples per bz 203015 * Tue Aug 15 2006 Neil Horman - 1.101-44 - updated init script to implement status function/scrub err messages * Wed Aug 09 2006 Jarod Wilson - 1.101-43 - Misc spec cleanups and macro-ifications * Wed Aug 09 2006 Jarod Wilson - 1.101-42 - Add %%dir /var/crash, so default kdump setup works * Thu Aug 03 2006 Neil Horman - 1.101-41 - fix another silly makefile error for makedumpfile * Thu Aug 03 2006 Neil Horman - 1.101-40 - exclude makedumpfile from build on non-x86[_64] arches * Thu Aug 03 2006 Neil Horman - 1.101-39 - exclude makedumpfile from build on non-x86[_64] arches * Thu Aug 03 2006 Neil Horman - 1.101-38 - updating makedumpfile makefile to use pkg-config on glib-2.0 * Thu Aug 03 2006 Neil Horman - 1.101-37 - updating makedumpfile makefile to use pkg-config * Thu Aug 03 2006 Neil Horman - 1.101-36 - Removing unneeded deps after Makefile fixup for makedumpfile * Thu Aug 03 2006 Neil Horman - 1.101-35 - fixing up FC6/RHEL5 BuildRequires line to build in brew * Wed Aug 02 2006 Neil Horman - 1.101-34 - enabling makedumpfile in build * Wed Aug 02 2006 Neil Horman - 1.101-33 - added makedumpfile source to package * Mon Jul 31 2006 Neil Horman - 1.101-32 - added et-dyn patch to allow loading of relocatable kernels * Thu Jul 27 2006 Neil Horman - 1.101-30 - fixing up missing patch to kdump.init * Wed Jul 19 2006 Neil Horman - 1.101-30 - add kexec frontend (bz 197695) * Wed Jul 12 2006 Jesse Keating - 1.101-29 - rebuild * Fri Jul 07 2006 Neil Horman 1.101-27.fc6 - Buildrequire zlib-devel * Thu Jun 22 2006 Neil Horman -1.101-19 - Bumping rev number * Thu Jun 22 2006 Neil Horman -1.101-17 - Add patch to allow ppc64 to ignore args-linux option * Wed Mar 08 2006 Bill Nottingham - 1.101-16 - fix scriptlet - call chkconfig --add, change the default in the script itself (#183633) * Wed Mar 08 2006 Thomas Graf - 1.101-15 - Don't add kdump service by default, let the user manually add it to avoid everyone seeing a warning. * Tue Mar 07 2006 Thomas Graf - 1.101-14 - Fix kdump.init to call kexec from its new location * Mon Mar 6 2006 Jeremy Katz - 1.101-13 - proper requires for scriptlets * Mon Mar 06 2006 Thomas Graf - 1.101-12 - Move kexec and kdump binaries to /sbin * Thu Mar 02 2006 Thomas Graf - 1.101-11 - Fix argument order when stopping kexec * Mon Feb 27 2006 Thomas Graf - 1.101-10 - kdump7.patch o Remove elf32 core headers support for x86_64 o Fix x86 prepare elf core header routine o Fix ppc64 kexec -p failure for gcc 4.10 o Fix few warnings for gcc 4.10 o Add the missing --initrd option for ppc64 o Fix ppc64 persistent root device bug - Remove --elf32-core-headers from default configuration, users may re-add it via KEXEC_ARGS. - Remove obsolete KEXEC_HEADERS * Wed Feb 22 2006 Thomas Graf - 1.101-9 - Remove wrong quotes around --command-line in kdump.init * Fri Feb 17 2006 Jeff Moyer - 1.101-8 - Fix the service stop case. It was previously unloading the wrong kernel. - Implement the "restart" function. - Add the "irqpoll" option as a default kdump kernel commandline parameter. - Create a default kernel command line in the sysconfig file upon rpm install. * Tue Feb 07 2006 Jesse Keating - 1.101-7.1.1 - rebuilt for new gcc4.1 snapshot and glibc changes * Thu Feb 02 2006 Thomas Graf - 1.101-7.1 - Add patch to enable the kdump binary for x86_64 * Wed Feb 01 2006 Thomas Graf - New kdump patch to support s390 arch + various fixes - Include kdump in x86_64 builds * Mon Jan 30 2006 Thomas Graf - New kdump patch to support x86_64 userspace * Fri Dec 16 2005 Jesse Keating - rebuilt for new gcj * Wed Nov 16 2005 Thomas Graf - 1.101-5 - Report missing kdump kernel image as warning * Thu Nov 3 2005 Jeff Moyer - 1.101-4 - Build for x86_64 as well. Kdump support doesn't work there, but users should be able to use kexec. * Fri Sep 23 2005 Jeff Moyer - 1.101-3 - Add a kdump sysconfig file and init script - Spec file additions for pre/post install/uninstall * Thu Aug 25 2005 Jeff Moyer - Initial prototype for RH/FC5