Name: kexec-tools

Version: 2.0.4

Release: 30%{?dist}

License: GPLv2

Group: Applications/System

Summary: The kexec/kdump userspace component.

Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.bz2

Source1: kdumpctl

Source2: kdump.sysconfig

Source3: kdump.sysconfig.x86_64

Source4: kdump.sysconfig.i386

Source5: kdump.sysconfig.ppc64

Source6: kdump.sysconfig.ia64

Source7: mkdumprd

Source8: kdump.conf

Source9: http://downloads.sourceforge.net/project/makedumpfile/makedumpfile/1.5.4/makedumpfile-1.5.4.tar.gz

Source10: kexec-kdump-howto.txt

Source11: firstboot_kdump.py

Source12: mkdumprd.8

Source13: kexec-tools-po-20131224.tgz

Source14: 98-kexec.rules

Source15: kdump.conf.5

Source16: kdump.service

Source17: rhcrashkernel-param

Source18: kdump.sysconfig.s390x

Source19: eppic_030413.tar.gz

Source20: kdump-lib.sh

Source21: kdump-in-cluster-environment.txt

Source22: supported-kdump-targets.txt

#######################################

# These are sources for mkdumpramfs

# Which is currently in development

#######################################

Source100: dracut-kdump.sh

Source101: dracut-module-setup.sh

Source102: dracut-monitor_dd_progress

Requires(post): systemd-units

Requires(preun): systemd-units

Requires(postun): systemd-units

Requires(pre): coreutils sed zlib 

Requires: dracut >= 033-145

Requires: dracut-network, ethtool

BuildRequires: zlib-devel zlib zlib-static elfutils-devel-static glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel

BuildRequires: pkgconfig intltool gettext 

BuildRequires: systemd-units

%ifarch %{ix86} x86_64 ppc64 ia64 ppc s390x

Obsoletes: diskdumputils netdump

%endif

#START INSERT

#

# Patches 0 through 100 are meant for x86 kexec-tools enablement

#

Patch001: kexec-tools-2.0.4-Revert-kexec-lengthen-the-kernel-command-line-image.patch

Patch002: kexec-tools-2.0.4-kexec-i386-Add-cmdline_add_memmap_internal-to-reduce.patch

Patch003: kexec-tools-2.0.4-Revert-kexec-include-reserved-e820-sections-in-crash.patch

#

# Patches 101 through 200 are meant for x86_64 kexec-tools enablement

#

Patch101: kexec-tools-2.0.4-kdump-x86-Process-multiple-Crash-kernel-in-proc-iome.patch

#

# Patches 201 through 300 are meant for ia64 kexec-tools enablement

#

#

# Patches 301 through 400 are meant for ppc64 kexec-tools enablement

#

Patch301: kexec-tools-2.0.4-makedumpfile-Add-vmap_area_list-definition-for-ppc-ppc64.patch

Patch302: kexec-tools-2.0.4-makedumpfile-Support-to-filter-dump-for-kernels-that-use.patch

#

# Patches 401 through 500 are meant for s390 kexec-tools enablement

#

#

# Patches 501 through 600 are meant for ppc kexec-tools enablement

#

#

# Patches 601 onward are generic patches

#

Patch601: kexec-tools-2.0.3-disable-kexec-test.patch

Patch604: kexec-tools-2.0.3-build-makedumpfile-eppic-shared-object.patch

Patch605: kexec-tools-2.0.4-makedumpfile-PATCH-Support-newer-kernels.patch

Patch606: kexec-tools-2.0.4-makedumpfile-Fix-max_mapnr-issue-on-system-has-over-44-b.patch

Patch607: kexec-tools-2.0.4-makedumpfile-Update-pfn_cyclic-when-the-cyclic-buffer-size-.patch

Patch608: kexec-tools-2.0.4-makedumpfile-Use-divideup-to-calculate-maximum-required-bit.patch

Patch609: kexec-tools-2.0.4-makedumpfile-cache-Allocate-buffers-at-initialization-t.patch

Patch610: kexec-tools-2.0.4-makedumpfile-cache-Reuse-entry-in-pending-list.patch

Patch612: kexec-tools-2.0.4-makedumpfile-Understand-v3.11-rc4-dmesg.patch

Patch613: kexec-tools-2.0.4-makedumpfile-Assign-non-printable-value-as-short-option.patch

Patch614: kexec-tools-2.0.4-makedumpfile-Add-help-and-man-message-for-help.patch

Patch615: kexec-tools-2.0.4-makedumpfile-Add-non-mmap-option-to-disable-mmap-manually.patch

Patch616: kexec-tools-2.0.4-makedumpfile-Fall-back-to-read-when-mmap-fails.patch

Patch617: kexec-tools-2.0.4-vmcore-dmesg-struct_val_u64-not-casting-u64-to-u32.patch

Patch618: kexec-tools-2.0.4-makedumpfile-Improve-progress-information-for-huge-memor.patch

Patch619: kexec-tools-2.0.4-vmcore-dmesg-stack-smashing-happend-in-extreme-case.patch

%description

kexec-tools provides /sbin/kexec binary that facilitates a new

kernel to boot using the kernel's kexec feature either on a

normal or a panic reboot. This package contains the /sbin/kexec

binary and ancillary utilities that together form the userspace

component of the kernel's kexec feature.

%ifarch %{ix86} x86_64 ia64 ppc64 s390x

%package eppic

Requires: %{name} = %{version}

Summary: Additional eppic_makedumpfile.so shared object

Group: Applications/System

%description eppic

The eppic_makedumpfile.so shared object is loaded by the

"makedumpfile --eppic" option, and is used to erase sensitive

or confidential kernel data from a dumpfile.

%endif

%prep

%setup -q 

mkdir -p -m755 kcp

tar -z -x -v -f %{SOURCE9}

tar -z -x -v -f %{SOURCE19}

%patch101 -p1

%patch301 -p1

%patch601 -p1

%patch604 -p1

%patch605 -p1

%patch606 -p1

%patch607 -p1

%patch608 -p1

%patch609 -p1

%patch610 -p1

%patch001 -p1

%patch002 -p1

%patch003 -p1

%patch612 -p1

%patch302 -p1

%patch613 -p1

%patch614 -p1

%patch615 -p1

%patch616 -p1

%patch617 -p1

%patch618 -p1

%patch619 -p1

tar -z -x -v -f %{SOURCE13}

%ifarch ppc

%define archdef ARCH=ppc

%endif

%build

%ifarch ia64

# ia64 gcc seems to have a problem adding -fexception -fstack-protect and

# -param ssp-protect-size, like the %configure macro does

# while that shouldn't be a problem, and it still builds fine, it results in

# the kdump kernel hanging on kexec boot.  I don't yet know why, but since those

# options aren't critical, I'm just overrideing them here for ia64

export CFLAGS="-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2"

%endif

%configure \

%ifarch ppc64

    --host=powerpc64-redhat-linux-gnu \

    --build=powerpc64-redhat-linux-gnu \

%endif

    --sbindir=/sbin

rm -f kexec-tools.spec.in

# setup the docs

cp %{SOURCE10} .

cp %{SOURCE21} .

cp %{SOURCE22} . 

make

%ifarch %{ix86} x86_64 ia64 ppc64 s390x

make -C eppic/libeppic

make -C makedumpfile-1.5.4 LINKTYPE=dynamic USELZO=on USESNAPPY=on

%endif

make -C kexec-tools-po

%install

make install DESTDIR=$RPM_BUILD_ROOT

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig

mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/

mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/udev/rules.d

mkdir -p $RPM_BUILD_ROOT%{_unitdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump

install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl

SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig

install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump

install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/sbin/mkdumprd

install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf

install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8

install -m 755 %{SOURCE11} $RPM_BUILD_ROOT%{_datadir}/kdump/firstboot_kdump.py

install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8

install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh

%ifnarch s390x

# For s390x the ELF header is created in the kdump kernel and therefore kexec

# udev rules are not required

install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_sysconfdir}/udev/rules.d/98-kexec.rules

%endif

install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5

install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service

mkdir -p $RPM_BUILD_ROOT/usr/sbin

install -m 755 %{SOURCE17} $RPM_BUILD_ROOT/usr/sbin/rhcrashkernel-param

%ifarch %{ix86} x86_64 ia64 ppc64 s390x

install -m 755 makedumpfile-1.5.4/makedumpfile $RPM_BUILD_ROOT/sbin/makedumpfile

install -m 644 makedumpfile-1.5.4/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz

install -m 644 makedumpfile-1.5.4/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz

install -m 644 makedumpfile-1.5.4/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample

install -m 755 makedumpfile-1.5.4/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so

%endif

make -C kexec-tools-po install DESTDIR=$RPM_BUILD_ROOT

%find_lang %{name}

%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')

# deal with dracut modules

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase

cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

%define dracutlibdir %{_prefix}/lib/dracut

#and move the custom dracut modules to the dracut directory

mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

%post

# Initial installation

%systemd_post kdump.service

touch /etc/kdump.conf

# This portion of the script is temporary.  Its only here

# to fix up broken boxes that require special settings 

# in /etc/sysconfig/kdump.  It will be removed when 

# These systems are fixed.

if [ -d /proc/bus/mckinley ]

then

	# This is for HP zx1 machines

	# They require machvec=dig on the kernel command line

	sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

elif [ -d /proc/sgi_sn ]

then

	# This is for SGI SN boxes

	# They require the --noio option to kexec 

	# since they don't support legacy io

	sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

fi

%postun

%systemd_postun_with_restart kdump.service

%preun

# Package removal, not upgrade

%systemd_preun kdump.service

%triggerun -- kexec-tools < 2.0.2-3

# Save the current service runlevel info

# User must manually run systemd-sysv-convert --apply kdump

# to migrate them to systemd targets

/usr/bin/systemd-sysv-convert --save kdump >/dev/null 2>&1 ||:

# Run these because the SysV package being removed won't do them

/sbin/chkconfig --del kdump >/dev/null 2>&1 || :

/bin/systemctl try-restart kdump.service >/dev/null 2>&1 || :

%triggerin -- firstboot

# we enable kdump everywhere except for paravirtualized xen domains; check here

if [ -f /proc/xen/capabilities ]; then

	if [ -z `grep control_d /proc/xen/capabilities` ]; then

		exit 0

	fi

fi

if [ ! -e %{_datadir}/firstboot/modules/firstboot_kdump.py ]

then

	ln -s %{_datadir}/kdump/firstboot_kdump.py %{_datadir}/firstboot/modules/firstboot_kdump.py

fi

%triggerin -- kernel-kdump

touch %{_sysconfdir}/kdump.conf

%triggerun -- firstboot

rm -f %{_datadir}/firstboot/modules/firstboot_kdump.py

%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump

# List out the initrds here, strip out version nubmers

# and search for corresponding kernel installs, if a kernel

# is not found, remove the corresponding kdump initrd

#start by getting a list of all the kdump initrds

MY_ARCH=`uname -m`

if [ "$MY_ARCH" == "ia64" ]

then

	IMGDIR=/boot/efi/efi/redhat

else

	IMGDIR=/boot

fi

for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null`

do

	KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'`

	if [ ! -e $IMGDIR/vmlinuz-$KDVER ]

	then

		# We have found an initrd with no corresponding kernel

		# so we should be able to remove it

		rm -f $i

	fi

done

%files -f %{name}.lang

/sbin/*

/usr/sbin/*

%{_bindir}/*

%{_datadir}/kdump

%{_prefix}/lib/kdump

%ifarch %{ix86} x86_64 ia64 ppc64 s390x

%{_sysconfdir}/makedumpfile.conf.sample

%endif

%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump

%config(noreplace,missingok) %{_sysconfdir}/kdump.conf

%ifnarch s390x

%config %{_sysconfdir}/udev/rules.d/*

%endif

%{dracutlibdir}/modules.d/*

%dir %{_localstatedir}/crash

%{_mandir}/man8/*

%{_mandir}/man5/*

%{_unitdir}/kdump.service

%doc News

%doc COPYING

%doc TODO

%doc kexec-kdump-howto.txt

%doc kdump-in-cluster-environment.txt

%doc supported-kdump-targets.txt

%ifarch %{ix86} x86_64 ia64 ppc64 s390x

%files eppic

%{_libdir}/eppic_makedumpfile.so

%endif

%changelog

* Wed Mar 26 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-30

- fix issue when dump path is mounted on nfs.

* Tue Mar 18 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-29

- vmcore-dmesg: stack smashing fix

- get_ssh_size fix for localized df output

* Mon Mar 10 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-28

- Document supported/unsupported/unknown list of dump targets

- Warn user about save vmcore path mounted by another disk

* Tue Mar 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-27

- mkdumprd: call dracut with --hostonly-cmdline (dracut >= 033-145)

- warning on secure boot enabled platform

* Tue Mar 04 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-26

- Regression fix on wdt kernel module install

* Mon Mar 03 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-25

- kdumpctl: Pass disable_cpu_apicid to kexec of capture kernel

- Relax restriction of dumping on encrypted target

- ssh dump: create random-seed manually

* Mon Feb 17 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-24

- remove selinux flipping when propagating ssh key

- add kdump-in-cluster-environment.txt to rpm pkg

- Secure Boot status check warning

- Some watchdog driver support

* Wed Jan 29 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-23

- Add acpi_no_memhotplug to kdump kernel

- Add fence kdump support

* Fri Jan 24 2014 Daniel Mach <dmach@redhat.com> - 2.0.4-22

- Mass rebuild 2014-01-24

* Wed Jan 22 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-21

- makedumpfile: Improve progress information for huge memory system

- s390: use nr_cpus=1 instead of maxcpus=1

* Fri Jan 17 2014 WANG Chao <chaowang@redhat.com> - 2.0.4-20

- vmcore-dmesg: fix timestamp error in vmcore-dmesg.txt

- makedumpfile: re-enable mmap() and introduce --non-mmap

- kdump.conf uncomment default core_collector line

- fix an issue when 'ssh' directive appearing in kdump.conf, the rest part of

  lines in this file are ignored

* Fri Dec 27 2013 Daniel Mach <dmach@redhat.com> - 2.0.4-19

- Mass rebuild 2013-12-27

* Tue Dec 24 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-18

- kexec-tools.spec: only install makedumpfile.conf on ix86 x86_64 ppc64 s390x

* Tue Dec 24 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-17

- kexec-tools.spec: remove /etc/kdump-adv-conf/

* Tue Dec 24 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-16

- update translation files

* Tue Dec 17 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-15

- makedumpfile: default to lzo compression

- makedumpfile: add makedumpfile.conf.sample and its manpage

* Tue Dec 03 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-14

- Add rd.memdebug in kdump module

- kdumpctl: Avoid leaking fd to subshell

- makedumpfile: Understand >= v3.11-rc4 dmesg

- makedumpfile, ppc: Support to filter dump for kernels that use CONFIG_SPARSEMEM_VMEMMAP.

* Fri Nov 15 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-13

- makedumpfile: disable mmap()

* Tue Oct 29 2013 WANG Chao <chaowang@redhat.com> - 2.0.4-12

- fix sadump format phys_base calculating error

- kdump, x86: Process multiple Crash kernel in /proc/iomem

- makedumpfile: wrong cyclic buffer size recalculation causes bitmap data corruption

- Fix max_mapnr issue on system has over 44-bit addressing.

* Sat Oct 12 2013 Baoquan He <bhe@redhat.com> -2.0.4-11

- kdump-lib.sh: strip_comments is not implemented correcty

* Fri Sep 27 2013 Baoquan He <bhe@redhat.com> - 2.0.4-10

- Back port 2 revert commits

- kdump.sysconfig: default to "nofail" mount

* Fri Sep 27 2013 Baoquan He <bhe@redhat.com> - 2.0.4-9

- Strip inline comments from the kdump config file before use

- kdump-lib.sh: add common function strip_comments

- Introduce kdump-lib.sh for kdump shared functions

- kdump.service: Start kdump after network is online and remote fs is mounted

- dracut-module-setup: _dev to be a local variable

- kdumpctl: Run multiple kdumpctl instances one by one in serial order

* Wed Aug 21 2013 Baoquan He <bhe@redhat.com> - 2.0.4-8

- remove 98selinux dependency

* Fri Aug 2  2013 Baoquan He <bhe@redhat.com> - 2.0.4-7

- dracut-kdump.sh: add do_dump() and error out if dump vmcore fails

- dracut-module-setup.sh: setup correct system time and time zone in 2nd kernel.

- kernel cmdline: Remove hugepage allocations

- Use /lib/dracut/no-emergency-shell to control action on fail

- Revert: kdump.sysconfig: Add option action_on_fail and set its default as continue

- dracut-kdump.sh: Redirect kdump script stdout/stderr to /dev/console

- add snappy build

* Fri Jul 12 2013 Baoquan He <bhe@redhat.com> - 2.0.4-6

- add lzo build

- makedumpfile: Add vmap_area_list definition for ppc/ppc64.

- pull makedumpfile-1.5.4

- mkdumprd: check return value of subshell

- mkdumprd: get_persistent_dev() return original dev if no persistent dev exists.

- dracut-kdump.sh: Merge dump_to_rootfs() to dump_fs()

- dracut-kdump.sh: explicitly sync after each dump

- Correct wrong weekday of changelog

- kexec-tools.spec: Remove incorrect description in changelog

* Tue Jun 25 2013 Baoquan He <bhe@redhat.com> - 2.0.4-5

- monitor-dd-progress fix

- rawdump: only show dd progress bar when core_collector is not makedumpfile

- kexec-tools.spec: replaces scriptlets with new systemd macros

- dracut-kdump.sh: umount fs right before kdump exit

- dracut-kdump.sh: recursively umount fs and its submounts

- dracut-kdump.sh: cleanup - using local variable names instead of $1/$2 in functions

- dracut-kdump.sh: name the invalid vmcore to vmcore-incomplete

- dracut-kdump.sh: Output top level information about the kdump progress.

- kexec-kdump-howto: Add a section for debugging tips

* Tue Jun 18 2013 Baoquan He <bhe@redhat.com> - 2.0.4-4

- dracut-module-setup.sh: improve the approach to get a bridged interface list

- dracut-module-setup.sh: cleanup - use kdump_get_mac_addr() function

- dracut-module-setup.sh: use kernel exported mac address in kdump_get_mac_addr()

- dracut-module-setup.sh: use perm addr of slaves to setup bonding network

- kdump: Do not output debug messages by default

- dracut-module-setup.sh: kdump module depends on drm module

- mkdumprd: return error if no write permission on save path of server for ssh

* Thu Jun 13 2013 Baoquan He <bhe@redhat.com> - 2.0.4-3

- mkdumprd: remove -M option for dracut

- kdumpctl: add selinux relabel when service startup

- depends on dracut selinux module

- dracut-kdump.sh: umount rootfs after dump_to_rootfs

- kdump.sysconfig: append "panic=10" to kdump cmdline

- kexec-kdump-howto: grubby is suggested modifing kernel cmdline

- kexec-tools.spec: removes kexec udev rules for s390

- kdump.sysconfig: Add option action_on_fail and set its default as continue

- Add tab key as delimiter for core_collector in kdump.conf

- redirect stdout to stderr

* Tue May 14 2013 Baoquan He <bhe@redhat.com> - 2.0.4-2

- kdump: Save vmcore-dmesg.txt before saving vmcore

- Remove "ip=" overwrite to 40ip.conf

- Add support for bridge over bond/team/vlan.

- Fix bonding options syntax and get all specified options from ifcfg file.

- add dracut_args option to kdump.conf

- kexec-tools.spec: Add ethtool to dependency.

- error out if dump target is encrypted

* Wed Apr  3 2013 Baoquan He <bhe@redhat.com> - 2.0.4-1

- Delete several patches which have been merged into kexec-tools-2.0.4

- Revert: Release 2.0.3-72

- Release 2.0.3-72

- Pull kexec-tools-2.0.4

- Check if block device as dump target is resettable

- mkdumprd: add function perror_exit

- Deprecate blacklist option

* Wed Mar 27 2013 Baoquan He <bhe@redhat.com> - 2.0.3-71

- Remove eppic support on ppc and s390 arch

* Mon Mar 18 2013 Baoquan He <bhe@redhat.com> - 2.0.3-70

- Change rules related to eppic in kexec-tools.spec

* Thu Mar 14 2013 Baoquan He <bhe@redhat.com> - 2.0.3-69

- Support for eppic language as a subpackage

* Thu Mar 14 2013 Baoquan He <bhe@redhat.com> - 2.0.3-68

- tune sysconfig to save memory usage

- Remove useless codes related to LOGGER in kdumpctl

- kdumpctl:print out the service status

- Return to start() function when check_ssh_target failed

- use findmnt instead of blkid in mkdumprd

- check dump target mounting earlier

- kdumpctl: rename function name check_config

- add function to check kdump config file

- dracut-module-setup.sh: remove UUID/LABEL quotes before using it

- Change dump_to_rootfs to be a default option and reboot to be default action

- Remove "-F" in CORE_COLLECTOR when dump_to_rootfs

* Tue Feb 19 2013 Baoquan He <bhe@redhat.com> - 2.0.3-67

- Remove comma which is redundant

- Modify codes related to dump dir to make it clearer

- Rectify the get_host_ip implementation

- Revert: Merge an upstream patch for fix a ppc64 makedumpfile bug with with CONFIG_SPARSEMEM_EXTREME

- pull makedumpfile 1.5.3

* Tue Feb 5 2013 Dave Young <ruyang@redhat.com> - 2.0.3-66

- Spec: remove kdump image when a corresponding kernel is removed

- Merge an upstream patch for fix a ppc64 makedumpfile bug

* Mon Jan 28 2013 Dave Young <ruyang@redhat.com> - 2.0.3-65

- Add support for team devices

- Update translation file po/it.po

- remove wait for net ok function

- add bootdev cmdline param

- kdumpnic cmdline file name cleanup

* Fri Jan 4 2013 Dave Young <ruyang@redhat.com> - 2.0.3-64

- fix issue of exec on stack for ppc32

* Fri Dec 21 2012 Dave Young <ruyang@redhat.com> - 2.0.3-63

- revert explictly handling of PIPESTATUS

- enable pipefail bash option

- wrong ssh key fix

- build fix: Update 3 po files: po/gu.po po/or.po po/zh_CN.po

* Fri Dec 21 2012 Dave Young <ruyang@redhat.com> - 2.0.3-62

- Pull translated po files from zanata

- Optimize redundent code fetching server of network dump

- change the dump dir format to be more readable

* Wed Dec 12 2012 Dave Young <ruyang@redhat.com> - 2.0.3-61

- firstboot:fix reserve mem ui spinbox step size

- handle readonly mounted filesystem

* Mon Dec 10 2012 Dave Young <ruyang@redhat.com> - 2.0.3-60

- makedumpfile 1.5.1

- Update po tar.gz

- Add a notes for zanata process

- Add two xmls file for po zanata translation

- Cleanup and recreate po files

* Fri Nov 16 2012 Dave Young <ruyang@redhat.com> - 2.0.3-59

- Enable kdump service after installation

- get MEM_RESERVED from sysfs attribute

- get_ssh_size: use -n to redirect stdin from /dev/null

- add random feeding code for ssh dump

- kdump option space checking improvement

- kdumpctl: multi dump target checking fix

* Thu Oct 25 2012 Dave Young <ruyang@redhat.com> - 2.0.3-58

- pull in two upstream patches

* Thu Oct 11 2012 Dave Young <ruyang@redhat.com> - 2.0.3-57

- improve persistent name handling

* Sat Sep 29 2012 Dave Young <ruyang@redhat.com> - 2.0.3-56

- Pull vmcore-dmesg patches from vivek

- ppc/ppc64: compile purgatory with gcc option msoft-float

- Update to support f18 grub2 efi config file

- pass persistent name to dracut --device

- pass persistent name to dracut --mount

- use persistent name in kdump.conf of initramfs

- mkdumprd: add function get_persistent_dev

- remove useless uuid and label handling

* Thu Sep 06 2012 Dave Young <ruyang@redhat.com> - 2.0.3-55

- doc fix for mount dump target before mkdumprd

- pull makedumpfile 1.5.0

* Wed Aug 29 2012 Dave Young <ruyang@redhat.com> - 2.0.3-54

- pass raw device as dracut argument

- iscsi setup fix

- firstboot: add automatic and manual memory reservation for rhel

- firstboot: remove unnecessary underline shortkey

- firstboot: fix gtk warning about non-zero page size

- firstboot: update all kernels config in grubbyCmd

- firstboot: add actual reserved memory widget

- firstboot code cleanup

- rhcrashkernel-param: echo crashkernel=auto for rhel7

- Remove the kernel-kdump handling

- s390x firstboot fix

- remove elilo support

- grub2 fix in firstboot

- Take closing the reboot dialog as no

- Handle new crashkernel= syntax in firstboot

- Fix a localized string in firstboot

- Configure kdump in firstboot

- fix firstboot to ensure kdump svc is disabled properly

- firstboot text domain fix

- Update to use systemctl instead of sysv chkconfig

- port force_rebuild kdump.conf option

- Change return value to indicate the result of dump_raw() correctly.

- call dracut function for default shell

* Mon Jul 23 2012 Dave Young <ruyang@redhat.com> - 2.0.3-53

- refactor net option

- use fstab-sys to mount nfs

- rename function dump_localfs

- dump_localfs error path fix

- update kexec-kdump-howto.txt about systemctl commands

- ssh propagate alert message fix

- remove useless dracut cmdline '-c /dev/null'

- remove useless dracut cmdline for kernel-modules and kdumpbase

- install core_collector in module-setup.sh

- install extra_bins in module-setup.sh

- remove busybox dependency

- improve warning message of space checking

- do not mount root twice

- do not add fstab-sys module in dracut cmdline

- omit dash module

- network dns config fix

- shell exit value fix 

* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.3-52

- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild

* Thu Jul 5 2012 Dave Young <ruyang@redhat.com> - 2.0.3-51

- add s390x netdev setup

- Add s390x support

- Cleanup temp file leaved at /tmp/

- add check_size function for fs dump

- add ssh check_size

- blacklist patch apply fix

- Respect bonding mode

- Support dump over vlan tagged bonding

* Fri Jun 22 2012 Dave Young <ruyang@redhat.com> - 2.0.3-50

- add blacklist option, Resolves: bz805774

- Add kdump_post and kdump_pre support, Resolves: bz805773

- Port check_config from rhel6, Resolves: bz805778

- raw core_collector fix

- ssh core_collector fix

- drcut-kdump.sh: cleanup kdump.conf check

* Tue Jun 12 2012 Dave Young <ruyang@redhat.com> - 2.0.3-49

- cleanup DUMP_INSTRUCTION handling

- final reboot behavior fix

- dump_rootfs for default target fix

- add vlan support

- fix and refactor bond handling code

- fix and refactor bridge handling code

- core_collector doc basic fix

- omit plymouth module, Resolves: bz821997

- mkdumprd manpage cleanup manpage

- mkdumprd: remove --debug

- mkdumprd: remove noconf

- makedumprd: remove -d

- kdump.conf add sshkey

- kdump.conf remove disk_timeout

- kdump.conf make path uncommented

- kdump.conf.5 add default poweroff

- kdump.conf default shell fix

- kdump.conf default default action fix

- kdump.conf.5 remove module option

- kdump.conf remove kdump_pre/kdump_post

- kdump.conf: remove link_delay