Name: kexec-tools

Version: 2.0.20

Release: 47%{?dist}

License: GPLv2

Group: Applications/System

Summary: The kexec/kdump userspace component

Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.xz

Source1: kdumpctl

Source2: kdump.sysconfig

Source3: kdump.sysconfig.x86_64

Source4: kdump.sysconfig.i386

Source5: kdump.sysconfig.ppc64

Source7: mkdumprd

Source8: kdump.conf

Source9: https://github.com/makedumpfile/makedumpfile/archive/1.6.8.tar.gz

Source10: kexec-kdump-howto.txt

Source12: mkdumprd.8

Source13: 98-kexec.rules

Source14: 98-kexec.rules.ppc64

Source15: kdump.conf.5

Source16: kdump.service

Source18: kdump.sysconfig.s390x

Source19: eppic_050615.tar.gz

Source20: kdump-lib.sh

Source21: kdump-in-cluster-environment.txt

Source22: kdump-dep-generator.sh

Source23: kdump-lib-initramfs.sh

Source24: kdump.sysconfig.ppc64le

Source25: kdumpctl.8

Source26: live-image-kdump-howto.txt

Source27: early-kdump-howto.txt

Source28: supported-kdump-targets.txt

Source29: kdump-udev-throttler

Source30: kdump.sysconfig.aarch64

Source31: fadump-howto.txt

Source32: 60-kdump.install

Source33: kdump-logger.sh

#######################################

# These are sources for mkdumpramfs

# Which is currently in development

#######################################

Source100: dracut-kdump.sh

Source101: dracut-module-setup.sh

Source102: dracut-monitor_dd_progress

Source103: dracut-kdump-error-handler.sh

Source104: dracut-kdump-emergency.service

Source105: dracut-kdump-error-handler.service

Source106: dracut-kdump-capture.service

Source107: dracut-kdump-emergency.target

Source108: dracut-early-kdump.sh

Source109: dracut-early-kdump-module-setup.sh

Requires(post): systemd-units

Requires(preun): systemd-units

Requires(postun): systemd-units

Requires(pre): coreutils sed zlib 

Requires: dracut >= 049-129

Requires: dracut-network >= 049

Requires: dracut-squash >= 049

Requires: ethtool

BuildRequires: zlib-devel zlib zlib-static elfutils-devel glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel

BuildRequires: pkgconfig intltool gettext 

BuildRequires: systemd-units

BuildRequires: automake autoconf libtool

%ifarch %{ix86} x86_64 ppc64 ppc s390x ppc64le

Obsoletes: diskdumputils netdump kexec-tools-eppic

%endif

ExcludeArch: i686

#START INSERT

#

# Patches 0 through 100 are meant for x86 kexec-tools enablement

#

#

# Patches 101 through 200 are meant for x86_64 kexec-tools enablement

#

#

# Patches 301 through 400 are meant for ppc64 kexec-tools enablement

#

#

# Patches 401 through 500 are meant for s390 kexec-tools enablement

#

#

# Patches 501 through 600 are meant for ARM kexec-tools enablement

#

#

# Patches 601 onward are generic patches

#

Patch601: rhelonly-kexec-tools-2.0.16-koji-build-fail-workaround.patch

Patch602: rhelonly-kexec-tools-2.0.18-eppic-fix-issues-with-hardening-flags.patch

#Patch603: rhonly-kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch

Patch604: kexec-tools-2.0.20-Cleanup-remove-the-read_elf_kcore.patch

Patch605: kexec-tools-2.0.20-Fix-an-error-definition-about-the-variable-fname.patch

Patch606: kexec-tools-2.0.20-Cleanup-move-it-back-from-util_lib-elf_info.c.patch

Patch607: kexec-tools-2.0.20-Limit-the-size-of-vmcore-dmesg.txt-to-2G.patch

Patch608: kexec-tools-2.0.20-vmcore-dmesg-vmcore-dmesg.c-Fix-shifting-error-repor.patch

Patch609: kexec-tools-2.0.20-kexec-add-variant-helper-functions-for-handling-memo.patch

Patch610: kexec-tools-2.0.20-arm64-kexec-allocate-memory-space-avoiding-reserved-.patch

Patch611: kexec-tools-2.0.20-arm64-kdump-deal-with-a-lot-of-resource-entries-in-p.patch

Patch612: kexec-tools-2.0.20-Remove-duplicated-variable-declarations.patch

Patch613: kexec-tools-2.0.20-eppic-Remove-duplicated-variable-declaration.patch

# Patches 701 onward for makedumpfile

Patch701: rhelonly-kexec-tools-2.0.20-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch

%description

kexec-tools provides /usr/sbin/kexec binary that facilitates a new

kernel to boot using the kernel's kexec feature either on a

normal or a panic reboot. This package contains the /usr/sbin/kexec

binary and ancillary utilities that together form the userspace

component of the kernel's kexec feature.

%prep

%setup -q 

mkdir -p -m755 kcp

tar -z -x -v -f %{SOURCE9}

tar -z -x -v -f %{SOURCE19}

%patch601 -p1

%patch602 -p1

#%patch603 -p1

%patch604 -p1

%patch605 -p1

%patch606 -p1

%patch607 -p1

%patch608 -p1

%patch609 -p1

%patch610 -p1

%patch611 -p1

%patch612 -p1

%patch613 -p1

%patch701 -p1

%ifarch ppc

%define archdef ARCH=ppc

%endif

%build

autoreconf

%configure \

%ifarch ppc64

    --host=powerpc64-redhat-linux-gnu \

    --build=powerpc64-redhat-linux-gnu \

%endif

%ifarch ppc64le

    --host=powerpc64le-redhat-linux-gnu \

    --build=powerpc64le-redhat-linux-gnu \

%endif

    --sbindir=/usr/sbin

rm -f kexec-tools.spec.in

# setup the docs

cp %{SOURCE10} .

cp %{SOURCE21} .

cp %{SOURCE26} .

cp %{SOURCE27} .

cp %{SOURCE28} .

cp %{SOURCE31} .

make

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

make -C eppic/libeppic

make -C makedumpfile-1.6.8 LINKTYPE=dynamic USELZO=on USESNAPPY=on

make -C makedumpfile-1.6.8 LDFLAGS="$LDFLAGS -I../eppic/libeppic -L../eppic/libeppic" eppic_makedumpfile.so

%endif

%install

mkdir -p -m755 $RPM_BUILD_ROOT/usr/sbin

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/pre.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/post.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/

mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_udevrulesdir}

mkdir -p $RPM_BUILD_ROOT%{_unitdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump

install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl

install -m 755 build/sbin/kexec $RPM_BUILD_ROOT/usr/sbin/kexec

install -m 755 build/sbin/vmcore-dmesg $RPM_BUILD_ROOT/usr/sbin/vmcore-dmesg

install -m 644 build/man/man8/kexec.8  $RPM_BUILD_ROOT%{_mandir}/man8/

install -m 644 build/man/man8/vmcore-dmesg.8  $RPM_BUILD_ROOT%{_mandir}/man8/

SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig

install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump

install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/usr/sbin/mkdumprd

install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf

install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8

install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8

install -m 644 %{SOURCE25} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8

install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh

install -m 755 %{SOURCE23} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh

install -m 755 %{SOURCE33} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-logger.sh

%ifnarch s390x ppc64 ppc64le

# For s390x the ELF header is created in the kdump kernel and therefore kexec

# udev rules are not required

install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

%endif

%ifarch ppc64 ppc64le

install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

%endif

%ifnarch s390x

install -m 755 %{SOURCE29} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler

%endif

install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5

install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service

install -m 755 -D %{SOURCE22} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

install -m 755 -D %{SOURCE32} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-kdump.install

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

install -m 755 makedumpfile-1.6.8/makedumpfile $RPM_BUILD_ROOT/usr/sbin/makedumpfile

install -m 644 makedumpfile-1.6.8/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz

install -m 644 makedumpfile-1.6.8/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz

install -m 644 makedumpfile-1.6.8/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample

install -m 755 makedumpfile-1.6.8/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so

mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

install -m 644 makedumpfile-1.6.8/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

%endif

%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')

%define remove_dracut_early_kdump_prefix() %(echo -n %1|sed 's/.*dracut-early-kdump-//g')

# deal with dracut modules

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase

cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}

cp %{SOURCE103} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE103}}

cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE104}}

cp %{SOURCE105} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE105}}

cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}}

cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump

cp %{SOURCE108} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

cp %{SOURCE109} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

%define dracutlibdir %{_prefix}/lib/dracut

#and move the custom dracut modules to the dracut directory

mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

%post

# Initial installation

%systemd_post kdump.service

touch /etc/kdump.conf

# This portion of the script is temporary.  Its only here

# to fix up broken boxes that require special settings 

# in /etc/sysconfig/kdump.  It will be removed when 

# These systems are fixed.

if [ -d /proc/bus/mckinley ]

then

	# This is for HP zx1 machines

	# They require machvec=dig on the kernel command line

	sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

elif [ -d /proc/sgi_sn ]

then

	# This is for SGI SN boxes

	# They require the --noio option to kexec 

	# since they don't support legacy io

	sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

fi

%postun

%systemd_postun_with_restart kdump.service

%preun

# Package removal, not upgrade

%systemd_preun kdump.service

%triggerun -- kexec-tools < 2.0.2-3

# Save the current service runlevel info

# User must manually run systemd-sysv-convert --apply kdump

# to migrate them to systemd targets

/usr/bin/systemd-sysv-convert --save kdump >/dev/null 2>&1 ||:

# Run these because the SysV package being removed won't do them

/usr/sbin/chkconfig --del kdump >/dev/null 2>&1 || :

/bin/systemctl try-restart kdump.service >/dev/null 2>&1 || :

%triggerin -- kernel-kdump

touch %{_sysconfdir}/kdump.conf

%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump

# List out the initrds here, strip out version nubmers

# and search for corresponding kernel installs, if a kernel

# is not found, remove the corresponding kdump initrd

IMGDIR=/boot

for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null`

do

	KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'`

	if [ ! -e $IMGDIR/vmlinuz-$KDVER ]

	then

		# We have found an initrd with no corresponding kernel

		# so we should be able to remove it

		rm -f $i

	fi

done

%files

/usr/sbin/kexec

/usr/sbin/makedumpfile

/usr/sbin/mkdumprd

/usr/sbin/vmcore-dmesg

%{_bindir}/*

%{_datadir}/kdump

%{_prefix}/lib/kdump

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_sysconfdir}/makedumpfile.conf.sample

%endif

%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump

%config(noreplace,missingok) %verify(not mtime) %{_sysconfdir}/kdump.conf

%ifnarch s390x

%config %{_udevrulesdir}

%{_udevrulesdir}/../kdump-udev-throttler

%endif

%{dracutlibdir}/modules.d/*

%dir %{_localstatedir}/crash

%dir %{_sysconfdir}/kdump

%dir %{_sysconfdir}/kdump/pre.d

%dir %{_sysconfdir}/kdump/post.d

%{_mandir}/man8/kdumpctl.8.gz

%{_mandir}/man8/kexec.8.gz

%{_mandir}/man8/makedumpfile.8.gz

%{_mandir}/man8/mkdumprd.8.gz

%{_mandir}/man8/vmcore-dmesg.8.gz

%{_mandir}/man5/*

%{_unitdir}/kdump.service

%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

%{_prefix}/lib/kernel/install.d/60-kdump.install

%doc News

%license COPYING

%doc TODO

%doc kexec-kdump-howto.txt

%doc early-kdump-howto.txt

%doc fadump-howto.txt

%doc supported-kdump-targets.txt

%doc kdump-in-cluster-environment.txt

%doc live-image-kdump-howto.txt

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_libdir}/eppic_makedumpfile.so

/usr/share/makedumpfile/

%endif

%changelog

* Mon May 10 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-47

- Implement IP netmask calculation to replace "ipcalc -m"

- kdumpctl: fix check_config error when kdump.conf is empty

- Fix incorrect vmcore permissions when dumped through ssh

- Fix incorrect permissions on kdump dmesg file

* Mon Jan 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-45

- origin/rhel-8.4.0) Revert "Revert "Append both nofail and x-systemd.before to kdump mount target""

- kdump.conf: add ipv6 example for nfs and ssh dump

- fix kdump failure of saving vmcore with the scp + ipv6 method

* Fri Jan 22 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-44

- module-setup.sh: don't polute the namespace unnecessarily

- module-setup.sh: don't source $dracutfunctions

- logger: source the logger file individually

- dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode

* Fri Jan 15 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-43

- Always include watchdog-modules

- mkdumprd: Ensure kdumpbase is added

- Move watchdog detect and install code to module-setup.sh

- Add a helper to omit non-mandatory dracut module

- Move some dracut module dependencies checks to module-setup.sh

- Set watchdog's pretimeout to zero in kdump kernel

- kdump-lib.sh: Use a more generic helper to detect omitted dracut module

- Fix the watchdog drivers detection code

- Add a helper for detecting watchdog drivers

- Remove a redundant nfs check

- kdumpctl: split the driver detection from fs dection function

- kdump.service: use ConditionKernelCommandLine=crashkernel

- Revert "Append both nofail and x-systemd.before to kdump mount target"

- Revert "Don's try to restart dracut-initqueue if it's already failed"

- Fix dump_fs mount point detection and fallback mount

- kdump.conf: Update doc about core_collector for ssh target

- Save the final failure information to log file if saving vmcore failed

- Doc: Improve the kdump sysconfig document

- kdumpctl: fix a variable expansion in check_fence_kdump_config()

- Fedora 33 rhpkg build bug

* Tue Dec 22 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-42

- makedumpfile: add support for ARMv8.2 LVA 52 bits

* Fri Dec 18 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-41

- Doc: improve mkdumprd man page

* Tue Dec 15 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-40

- Rework on dracut-module-setup.sh: Use systemctl call to replace ln_r

* Tue Dec 15 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-39

- dracut-module-setup.sh: Use systemctl call to replace ln_r

* Fri Dec 11 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-38

- Don's try to restart dracut-initqueue if it's already failed

- fadump-howto: update about 'nocma' and 'off' options for 'fadump=' parameter

- dracut-module-setup.sh: use auto6 for ipv6

- module-setup.sh: enable vlan on team interface

- Fix rootfs detection in dump_fs

- Remove RHEL-only patch: kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch

- Rebase to makedumpfile-1.6.8 (step1)

* Fri Nov 13 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-37

- Doc: improve the usage documentation of the logger

- Update the kdump sysconfig

- Capitalize the configuration name of log level

- Add the rd.kdumploglvl option to control log level in the second kernel

- Appropriately converts logger numeric level to syslog log level

- Remove unused log levels for kdump logger

- Add sanity checks for the log levels

- Add code comments to help better understanding

- Doc: add a documentation for the usage of logger

- Improve debugging in the kdump kernel

- kdumpctl: add the '-d' option to enable the kexec loading debugging messages

- kdump.sysconfig: add the kdump logger configurations

- enable the logger for kdump

- introduce the kdump logger from the dracut

* Fri Nov  6 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-36

- arm64: Enable 'kexec_file_load' by default

- Fix, Add a kernel install hook to clean up kdump initramfs

* Fri Oct 30 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-35

- module-setup.sh: Instead of drop journalctl log, just don't read kmsg

- s390x: enable the kexec file load by default

- increase makdumpfile default message level to 7

- Rework check_config and warn on any duplicated option

- kdumpctl: Error out if path is set more than once.

- Don't drop journalctl content if failure action is "shell"

- dracut-module-install: Move systemd conf install code to a function

- kdump-lib.sh: Remove is_atomic

- Refactor kernel image and initrd detection code

- early-kdump: Use consistent symbol link for kernel and initramfs

- kdump-lib: strip grub device from kdump_bootdir

- kdumpctl: fix driver change detection on latest Fedora

- Revert "kdump-lib: disable efifb if hyperv_fb is in use"

- kdump-lib.sh: detect secure boot on s390

- Add a kernel install hook to clean up kdump initramfs

* Wed Aug 19 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-34

- kdump-lib: disable efifb if hyperv_fb is in use

* Tue Aug 18 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-33

- sadump, kaslr: fix failure of calculating kaslr_offset due to an sadump format restriction

* Mon Aug  3 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-32

- kdumpctl: exit if either pre.d or post.d is missing

* Wed Jul 22 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-31

- ppc64/kdump: use kexec_file_load when secureboot is enabled

- kdump_pre: make notes more precise

- dracut-kdump.sh: exit shell when machine reboot

- kdump.conf: fix a grammar issue

- kdumpctl: detect modification of scripts by its directory's timestamp

- module-setup.sh: suppress false alarm

- kexec-tools.spec: make the existence of pre.d and post.d mandatory

* Tue Jul 14 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-30

- x86_64: enable the kexec file load by default

- Revert "kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default"

* Wed Jun 24 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-29

- mkdumprd: Improve the error message for umounted dump target

* Wed Jun 24 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-28

- mkdumprd: Fix nfs detection in to_mount

- Always wrap up call to dracut get_persistent_dev function

- man: improve description about /etc/kdump/{pre.d,post.d}interface

* Tue Jun 16 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-27

- kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default

* Mon Jun 15 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-26

- Fix kdump failure when mount target specified by dracut_args

- mkdumprd: Fix dracut error on multiple extra_modules

* Mon Jun 15 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-25

- kdump.conf: Specify /etc/kdump/{pre.d,post.d}interface

- dracut-kdump.sh: Execute the binary and script filesin /etc/kdump/{pre.d,post.d}

- kdumpctl: Check the update of the binary and script files in /etc/kdump/{pre.d,post.d}

- dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs

* Thu Jun 4 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-24

- fadump: update fadump-howto.txt with some more troubleshooting help

* Wed Jun 3 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-23

- fadump-howto.txt: source it in spec file

* Mon Jun 1 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-22

- mkdumprd: Use DUMP_TARGET which printing error message during ssh

* Mon Jun 1 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-21

- Don't inherit swiotlb parameter form 1st kernel by default

- Add a new option 'rd.znet_ifname' in order to use it in udev rules

- kdump.sysconfig: Remove the option 'log_buf_len' from kdump command line

- kdump-error-handler.service: Remove ExecStopPost

- module-setup.sh: Add "rd.neednet" parameter if network is needed

* Thu May 28 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-20

- Update docs for the new noauto dump target support

- kexec-kdump-howto.txt: Add some format to the document

- mkdumprd: generate usable kdump initramfs even target is not mounted

- Use get_mount_info to replace findmnt calls

- kdump-lib.sh: add fstab failback helper for getting mount info

- Allow calling mkdumprd from kdumpctl even if targat not mounted

- Add a is_mounted helper

- Introduce get_kdump_mntpoint_from_target and fix duplicated /

- Doc: Improves the early-kdump-howto.txt document in several points

- Doc: Add --force option to step 2 in early-kdump-howto.txt

- Doc: Fix typo in early-kdump-howto.txt

- Remove adjust_bind_mount_path call

- No longer treat atomic/silverblue specially

- mkdumprd: Simplify handling of user specified target

- mkdumprd: Use get_save_path instead of parsing config

- Remove is_dump_target_configured

- Always use get_save_path to get the 'path' option

- kdump-lib: Don't abuse echo, and clean up

- mkdumprd: Fix dracut args parsing

- mkdumprd: simplify dracut args parsing

* Thu May 21 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-19

- dracut-module-setup.sh: improve get_alias()

- fadump: update fadump-howto.txt with some troubleshooting help

- Append both nofail and x-systemd.before to kdump mount target

- Partially Revert "Don't mount the dump target unless needed"

- Don't unmount the dump target just after saving vmcore

* Mon May 11 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-18

- makedumpfile: Avoid false-positive failure in mem_seciton validation

* Tue Apr 21 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-17

- mkdumprd: Use makedumpfile --check-params option

* Thu Apr  9 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-16

- makedumpfile update to latest

* Wed Apr  1 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-15

- makedumpfile rebase to 1.6.7 

* Tue Feb 18 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-14

- kexec-tools/module-setup: Ensure eth devices get IP address for VLAN

* Wed Feb 12 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-13

- Add document to declare FCoE support

* Wed Feb 12 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-12

- powerpc: enable the scripts to capture dump on POWERNV platform

* Tue Feb  4 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-11

- s390: Use get_kaslr_offset_general() for s390x

* Fri Jan 10 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-10

- arm64: kdump: deal with a lot of resource entries in /proc/iomem

- arm64: kexec: allocate memory space avoiding reserved regions

- kexec: add variant helper functions for handling memory regions

* Thu Dec 12 2019 Pingfan Liu <piliu@redhat.com> - 2.0.20-9

- makedumpfile: assign bitmap1/2 fd for subprocess in non-cyclic mode

* Mon Dec  2 2019 Pingfan Liu <piliu@redhat.com> - 2.0.20-8

- makedumpfile: remove -lebl

* Thu Nov 28 2019 Pingfan Liu <piliu@redhat.com> - 2.0.20-7

- makedumpfile: Fix off-by-one issue in exclude_nodata_pages()

* Wed Nov 27 2019 Pingfan Liu <piliu@redhat.com> - 2.0.20-6

-rhel-8.2.0, origin/rhel-8.2.0) Increase SECTION_MAP_LAST_BIT to 4

- spec: move binaries from /sbin to /usr/sbin

- As /etc/kdump.conf timestamp is updated do not compare it when doing rpm --verify

- kdumpctl: make reload fail proof

* Tue Nov 12 2019 Pingfan Liu <piliu@redhat.com> - 2.0.20-5

- Don't execute final_action if failure_action terminates the system

- module-setup: re-fix 99kdumpbase network dependency

- kdumpctl: bail out immediately if host key verification failed

- kdumpctl: echo msg when waiting for connection

- kdumpctl: distinguish the failed reason of ssh

- kdumpctl: wait a while for network ready if dump target is ssh

- dracut-module-setup: filter out localhost for generic_fence_kdump

- dracut-module-setup: get localhost alias by manual

* Mon Oct 28 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-12.4

- dracut-module-setup.sh: Don't use squash module for fadump

- Don't mount the dump target unless needed

- dracut-module-setup: fix bond ifcfg processing

- Doc: amend the man page of kdump.conf

* Mon Oct 28 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-12.3

- Limit the size of vmcore-dmesg.txt to 2G

- makedumpfile: x86_64: Fix incorrect exclusion by -e option with KASLR

- mkdumprd: ensure ssh path exists before check size

* Fri Oct 18 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-12.2

- rebase to kexec-tools-2.0.20 and makedumpfile-1.6.6

* Fri Aug  9 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-12

- Don't forward and drop journalctl logs for fadump

* Mon Aug  5 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-11

- Drop switch root capability for non fadump initramfs

* Mon Aug  5 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-10

- Forward logs in kdump kernel to console directly

* Fri Jul 19 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-9

- kexec/arm64: Add support for handling zlib compressed (Image.gz) image

- kexec/kexec-zlib.h: Add 'is_zlib_file()' helper function

- kexec-uImage-arm64.c: Fix return value of uImage_arm64_probe()

- kexec/kexec.c: Add the missing close() for fd used for kexec_file_load()

* Sun Jul 14 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-8

- kdump.sysconfig/x86_64: Disable HEST by default

* Mon Jun 17 2019 Kairui Song <kasong@redhat.com> - 2.0.19-7

- dracut-kdump-capture.service: Use OnFailureJobMode instead of deprecated OnFailureIsolate

* Wed Jun 12 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-6

- kexec-kdump-howto.txt: Add notes about device dump

- Disable device dump by default

* Mon Jun 10 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-5

- kdumpctl: check for ssh path availability when rebuild

- kdumpctl: Check kdump.conf for error when rebuild is called

- makedumpfile: x86_64: Add support for AMD Secure Memory Encryption

- aarch64/kdump.sysconfig: Make config options similar to x86_64

* Mon May 27 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-4

- kexec-kdump-howto.txt: Add document about encrypted targets

- kexec-kdump-howto.txt: Add document about initramfs rebiuld

- kexec-kdump-howto: Add note on setting correct value of kptr_restrict

- doc: fix dead links in the file kexec-kdump-howto.txt

- earlykdump: provide a prompt message after the rebuilding of kdump initramfs.

- Get rid of duplicated strip_comments when reading config

- mkdumprd: Improve the config reading logic

- kdumpctl: don't always rebuild when extra_modules is set

- kdumpctl: follow symlink when checking for modified files

- fadump: leverage kernel support to re-regisgter FADump

* Wed May 15 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-3

- earlykdump: Add a note of final_action option to avoid crash loop

- Add final_action option to kdump.conf

- Add failure_action as alias of default and make default obsolete

- earlykdump: warn when installed kernel version differs from dracut target

- earlykdump: add more sanity check when generating initramfs

- fadump: use the original initrd to rebuild fadump initrdfrom

* Fri May 10 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-2

- kdumpctl: Detect block device driver change for initramfs rebuild

- Revert "kdumpctl: Rebuild initramfs if loaded kernel modules changed"

- mkdumprd: allow spaces after 'path' config phrase with network dump setting

- kexec.rules: create dedicated udev rules for ppc64

- Revert "rhel-only/kexec.rules: create dedicated udev rules for ppc64"

- rh-only makedumpfile/arm64: Add support for ARMv8.2-LVA (52-bit user-space VA support)

* Mon Apr 22 2019 Pingfan Liu <piliu@redhat.com> - 2.0.19-1

- kexec-tools: rebasing to 2.0.19

- makedumpfile: upgrade to 1.6.5

- kexec-tools: x86: Introduce a new option --reuse-video-type

- makedumpfile: exclude pages that are logically offline

- earlykdump: Fix failure when earlykdump is included by dracut

- Update man page for new kdumpctl command: reload / rebuild

- kdumpctl: add rebuild support

- rhel-only/kexec.rules: create dedicated udev rules for ppc64

* Mon Apr 15 2019 Pingfan Liu <piliu@redhat.com> - 2.0.17-30

- Enable building with hardening flags

* Fri Mar 15 2019 Pingfan Liu <piliu@redhat.com> - 2.0.17-29

- add gating

* Fri Feb 22 2019 Pingfan Liu <piliu@redhat.com> - 2.0.17-28

- makedumpfile/arm64: Add support for ARMv8.2-LVA (52-bit user-space VA support)

* Fri Feb  1 2019 Pingfan Liu <piliu@redhat.com> - 2.0.17-27

- Revert "kdumpctl, earlykdump: Don't use kexec_file_load when secure boot is enabled"

- mkdumprd: refine regex on dropping mount options

* Mon Jan 14 2019 Pingfan Liu <piliu@redhat.com> - 2.0.17-26

- earlykdump: fix kexec fails to load the early kdump kernel

- makedumpfile/x86_64: fix an unnecessary message with --mem-usage option