From 31537e66c2830783c4037ebace6801356b7ba520 Mon Sep 17 00:00:00 2001
From: Robert Marshall <rmarshall@redhat.com>
Date: Fri, 1 Jul 2016 14:54:30 -0400
Subject: [PATCH 56/60] Reorganize grubby man page (#1232168)
Broke the grubby man page into clearer sections and re-organized the
content by general use case for easier reading.
Related: rhbz#1232168
---
grubby.8 | 197 +++++++++++++++++++++++++++++++++++----------------------------
1 file changed, 109 insertions(+), 88 deletions(-)
diff --git a/grubby.8 b/grubby.8
index 709a539..005a6c2 100644
--- a/grubby.8
+++ b/grubby.8
@@ -1,10 +1,13 @@
.TH GRUBBY 8 "Tue Jan 18 2005"
+
.SH NAME
+
grubby \- command line tool for configuring grub, lilo, elilo, yaboot and zipl
.SH SYNOPSIS
-\fBgrubby\fR [--add-kernel=\fIkernel-path\fR] [--args=\fIargs\fR]
- [--bad-image-okay] [--boot-filesystem=\fIbootfs\fR]
+
+\fBgrubby\fR [--add-kernel=\fIkernel-path\fR] [--args=\fIargs\fR]
+ [--bad-image-okay] [--boot-filesystem=\fIbootfs\fR]
[--bootloader-probe] [--config-file \fIpath\fR] [--copy-default]
[--debug] [--default-kernel] [--default-index] [--default-title]
[--grub] [--lilo] [--yaboot] [--silo] [--zipl]
@@ -17,12 +20,17 @@ grubby \- command line tool for configuring grub, lilo, elilo, yaboot and zipl
[--remove-mbargs=\fIargs\fR]
.SH DESCRIPTION
+
+.SS General Information
+
\fBgrubby\fR is a command line tool for updating and displaying information
about the configuration files for the \fBgrub\fR, \fBlilo\fR, \fBelilo\fR
(ia64), \fByaboot\fR (powerpc) and \fBzipl\fR (s390) boot loaders. It
is primarily designed to be used from scripts which install new
kernels and need to find information about the current boot environment.
+.SS Architecture Support
+
On BIOS-based Intel x86 platforms, \fBgrub2\fR is the default bootloader and
the configuration file is in \fB/boot/grub2/grub.cfg\fR. On UEFI-based Intel
x86 platforms, \fBgrub2\fR is the default bootloader, and the configuration
@@ -34,6 +42,8 @@ config stored in \fB/boot/grub2/grub.cfg\fR. The earlier Power7 systems use \fBy
parsing and the configuration file should be in \fB/etc/yaboot.conf\fR. On
s390 platforms the \fBzipl bootloader\fR will read from \fB/etc/zipl.conf\fR.
+.SS Special Arguments
+
There are a number of ways to specify the kernel used for \fB-\-info\fR,
\fB-\-remove-kernel\fR, and \fB-\-update-kernel\fR. Specificying \fBDEFAULT\fR
or \fBALL\fR selects the default entry and all of the entries, respectively.
@@ -43,13 +53,24 @@ be specified by using \fBTITLE=\fItitle\fR as the argument; all entries
with that title are used.
.SH OPTIONS
+
+.SS Basic Options
+
.TP
\fB-\-add-kernel\fR=\fIkernel-path\fR
Add a new boot entry for the kernel located at \fIkernel-path\fR.
.TP
-\fB-\-set-index\fR=\fIentry-index\fR
-Set the position at which to add a new entry created with \fB-\-add-kernel\fR.
+\fB-\-remove-kernel\fR=\fIkernel-path\fR
+Removes all boot entries which match \fIkernel-path\fR. This may be used
+along with -\-add-kernel, in which case the new kernel being added will
+never be removed.
+
+.TP
+\fB-\-update-kernel\fR=\fIkernel-path\fR
+The entries for kernels matching \fRkernel-path\fR are updated. Currently
+the only items that can be updated is the kernel argument list, which is
+modified via the \fB-\-args\fR and \fB-\-remove-args\fR options.
.TP
\fB-\-args\fR=\fIkernel-args\fR
@@ -64,49 +85,53 @@ file has special handling for specifying the root filesystem (like
lilo.conf does).
.TP
-\fB-\-bad-image-okay\fR
-When \fBgrubby\fR is looking for a entry to use for something (such
-as a template or a default boot entry) it uses sanity checks, such as
-ensuring that the kernel exists in the filesystem, to make sure
-entries that obviously won't work aren't selected. This option overrides
-that behavior, and is designed primarily for testing.
+\fB-\-remove-args\fR=\fIkernel-args\fR
+The arguments specified by \fIkernel-args\fR are removed from the
+kernels specified by \fB-\-update-kernel\fR. The \fBroot\fR argument
+gets special handling for configuration files that support separate root
+filesystem configuration.
.TP
-\fB-\-boot-filesystem\fR=\fIbootfs\fR
-The \fBgrub\fR boot loader expects file paths listed in it's configuration
-path to be relative to the top of the filesystem they are on, rather then
-relative to the current root filesystem. By default \fBgrubby\fR searches
-the list of currently mounted filesystems to determine this. If this option
-is given \fBgrubby\fR acts as if the specified filesystem was the filesystem
-containing the kernel (this option is designed primarily for testing).
+\fB-\-copy-default\fR
+\fBgrubby\fR will copy as much information (such as kernel arguments and
+root device) as possible from the current default kernel. The kernel path
+and initrd path will never be copied.
.TP
-\fB-\-bootloader-probe\fR
-\fBgrubby\fR tries to determine if \fBgrub\fR or \fBlilo\fR is currently
-installed. When one of those bootloaders is found the name of that bootloader
-is displayed on stdout. Both could be installed (on different devices), and
-grubby will print out the names of both bootloaders, one per line. The probe
-for \fBgrub\fR requires a commented out boot directive \fBgrub.conf\fR
-identical to the standard directive in the lilo configuration file. If this
-is not present \fBgrubby\fR will assume grub is not installed (note
-that \fBanaconda\fR places this directive in \fBgrub.conf\fR files it creates).
-This option is only available on ia32 platforms.
+\fB-\-title\fR=\fIentry-title\fR
+When a new kernel entry is added \fIentry-title\fR is used as the title
+(\fBlilo\fR label) for the entry. If \fIentry-title\fR is longer then maximum
+length allowed by the bootloader (15 for lilo, unlimited for grub and elilo)
+the title is shortened to a (unique) entry.
+.TP
+\fB-\-initrd\fR=\fIinitrd-path\fR
+Use \fIinitrd-path\fR as the path to an initial ram disk for a new kernel
+being added.
.TP
-\fB-\-config-file\fR=\fIpath\fR
-Use \fIpath\fR as the configuration file rather then the default.
+\fB-\-set-default\fR=\fIkernel-path\fR
+The first entry which boots the specified kernel is made the default
+boot entry.
.TP
-\fB-\-copy-default\fR
-\fBgrubby\fR will copy as much information (such as kernel arguments and
-root device) as possible from the current default kernel. The kernel path
-and initrd path will never be copied.
+\fB-\-set-default-index\fR=\fIentry-index\fR
+Makes the given entry number the default boot entry.
+
+.TP
+\fB-\-make-default\fR
+Make the new kernel entry being added the default entry.
+
+.TP
+\fB-\-set-index\fR=\fIentry-index\fR
+Set the position at which to add a new entry created with \fB-\-add-kernel\fR.
.TP
\fB-\-debug\fR
Display extra debugging information for failures.
+.SS Display Options
+
.TP
\fB-\-default-kernel\fR
Display the full path to the current default kernel and exit.
@@ -120,79 +145,73 @@ Display the numeric index of the current default boot entry and exit.
Display the title of the current default boot entry and exit.
.TP
-\fB-\-elilo\fR
-Use an \fBelilo\fR style configuration file.
-
-.TP
-\fB-\-grub\fR
-Use a \fBgrub\fR style configuration file instead of \fBlilo\fR style. This
-is the default on ia32 platforms.
-
-.TP
\fB-\-info\fR=\fIkernel-path\fR
Display information on all boot entries which match \fIkernel-path\fR. I
.TP
-\fB-\-initrd\fR=\fIinitrd-path\fR
-Use \fIinitrd-path\fR as the path to an initial ram disk for a new kernel
-being added.
+\fB-\-bootloader-probe\fR
+\fBgrubby\fR tries to determine if \fBgrub\fR or \fBlilo\fR is currently
+installed. When one of those bootloaders is found the name of that bootloader
+is displayed on stdout. Both could be installed (on different devices), and
+grubby will print out the names of both bootloaders, one per line. The probe
+for \fBgrub\fR requires a commented out boot directive \fBgrub.conf\fR
+identical to the standard directive in the lilo configuration file. If this
+is not present \fBgrubby\fR will assume grub is not installed (note
+that \fBanaconda\fR places this directive in \fBgrub.conf\fR files it creates).
+This option is only available on ia32 platforms.
.TP
-\fB-\-lilo\fR
-Use a \fBlilo\fR style configuration file.
+\fB-\-version\fR
+Display the version of \fBgrubby\fR being run and then exit immediately.
-.TP
-\fB-\-make-default\fR
-Make the new kernel entry being added the default entry.
+.SS Output Format Options
.TP
-\fB-\-remove-args\fR=\fIkernel-args\fR
-The arguments specified by \fIkernel-args\fR are removed from the
-kernels specified by \fB-\-update-kernel\fR. The \fBroot\fR argument
-gets special handling for configuration files that support separate root
-filesystem configuration.
+\fB-\-elilo\fR
+Use an \fBelilo\fR style configuration file.
.TP
-\fB-\-remove-kernel\fR=\fIkernel-path\fR
-Removes all boot entries which match \fIkernel-path\fR. This may be used
-along with -\-add-kernel, in which case the new kernel being added will
-never be removed.
+\fB-\-grub\fR
+Use a \fBgrub\fR style configuration file instead of \fBlilo\fR style. This
+is the default on ia32 platforms.
.TP
-\fB-\-set-default\fR=\fIkernel-path\fR
-The first entry which boots the specified kernel is made the default
-boot entry.
+\fB-\-lilo\fR
+Use a \fBlilo\fR style configuration file.
.TP
-\fB-\-set-default-index\fR=\fIentry-index\fR
-Makes the given entry number the default boot entry.
+\fB-\-yaboot\fR
+Use an \fByaboot\fR style configuration file.
.TP
-\fB-\-title\fR=\fIentry-title\fR
-When a new kernel entry is added \fIentry-title\fR is used as the title
-(\fBlilo\fR label) for the entry. If \fIentry-title\fR is longer then maximum
-length allowed by the bootloader (15 for lilo, unlimited for grub and elilo)
-the title is shortened to a (unique) entry.
+\fB-\-zipl\fR
+Use an \fBzipl\fR style configuration file.
-.TP
-\fB-\-update-kernel\fR=\fIkernel-path\fR
-The entries for kernels matching \fRkernel-path\fR are updated. Currently
-the only items that can be updated is the kernel argument list, which is
-modified via the \fB-\-args\fR and \fB-\-remove-args\fR options.
+.SS Override Options
.TP
-\fB-\-version\fR
-Display the version of \fBgrubby\fR being run and then exit immediately.
+\fB-\-bad-image-okay\fR
+When \fBgrubby\fR is looking for a entry to use for something (such
+as a template or a default boot entry) it uses sanity checks, such as
+ensuring that the kernel exists in the filesystem, to make sure
+entries that obviously won't work aren't selected. This option overrides
+that behavior, and is designed primarily for testing.
.TP
-\fB-\-yaboot\fR
-Use an \fByaboot\fR style configuration file.
+\fB-\-boot-filesystem\fR=\fIbootfs\fR
+The \fBgrub\fR boot loader expects file paths listed in it's configuration
+path to be relative to the top of the filesystem they are on, rather then
+relative to the current root filesystem. By default \fBgrubby\fR searches
+the list of currently mounted filesystems to determine this. If this option
+is given \fBgrubby\fR acts as if the specified filesystem was the filesystem
+containing the kernel (this option is designed primarily for testing).
.TP
-\fB-\-zipl\fR
-Use an \fBzipl\fR style configuration file.
+\fB-\-config-file\fR=\fIpath\fR
+Use \fIpath\fR as the configuration file rather then the default.
+
+.SS Multiboot Options
-.SH MULTIBOOT OPTIONS
The Multiboot Specification provides a genreic interface for boot
loaders and operating systems. It is supported by the GRUB bootloader.
@@ -204,34 +223,36 @@ Add a new boot entry for the multiboot kernel located at
.TP
\fB-\-remove-multiboot\fR=\fImultiboot-path\fR
-Removes all boot entries which match \fImultiboot-path\fR.
+Removes all boot entries which match \fImultiboot-path\fR.
.TP
\fB-\-mbargs\fR=\fImultiboot-args\fR
-When a new multiboot kernel is added, this specifies the command line
-arguments which should be passed to that kernel by default
+When a new multiboot kernel is added, this specifies the command line
+arguments which should be passed to that kernel by default
When \fB-\-update-kernel\fR is used, this specifies new arguments to add
to the argument list. Multiple, space separated arguments may be used. If
-an argument already exists the new value replaces the old values.
+an argument already exists the new value replaces the old values.
.TP
\fB-\-remove-mbargs\fR=\fImultiboot-args\fR
-The arguments specified by \fImultiboot-args\fR are removed from the
-kernels specified by \fB-\-update-kernel\fR.
-
+The arguments specified by \fImultiboot-args\fR are removed from the
+kernels specified by \fB-\-update-kernel\fR.
.SH "BUGS"
+
The command line syntax is more than a little baroque. This probably
won't be fixed as \fBgrubby\fR is only intended to be called from shell
scripts which can get it right.
.SH "SEE ALSO"
+
.BR grub (8),
.BR lilo (8),
.BR yaboot (8),
.BR mkinitrd (8)
.SH AUTHORS
+
.nf
Erik Troan
Jeremy Katz
--
2.5.5