%global _hardened_build 1

%global _for_fedora_koji_builds 0

# uncomment and add '%' to use the prereltag for pre-releases
# %%global prereltag qa3

##-----------------------------------------------------------------------------
## All argument definitions should be placed here and keep them sorted
##

# asan
# if you wish to compile an rpm with address sanitizer...
# rpmbuild -ta glusterfs-6.0.tar.gz --with asan
%{?_with_asan:%global _with_asan --enable-asan}

%if ( 0%{?rhel} && 0%{?rhel} < 7 )
%global _with_asan %{nil}
%endif

# bd
# if you wish to compile an rpm without the BD map support...
# rpmbuild -ta glusterfs-6.0.tar.gz --without bd
%{?_without_bd:%global _without_bd --disable-bd-xlator}

%if ( 0%{?rhel} && 0%{?rhel} > 7 )
%global _without_bd --without-bd
%endif

# cmocka
# if you wish to compile an rpm with cmocka unit testing...
# rpmbuild -ta glusterfs-6.0.tar.gz --with cmocka
%{?_with_cmocka:%global _with_cmocka --enable-cmocka}

# debug
# if you wish to compile an rpm with debugging...
# rpmbuild -ta glusterfs-6.0.tar.gz --with debug
%{?_with_debug:%global _with_debug --enable-debug}

# epoll
# if you wish to compile an rpm without epoll...
# rpmbuild -ta glusterfs-6.0.tar.gz --without epoll
%{?_without_epoll:%global _without_epoll --disable-epoll}

# fusermount
# if you wish to compile an rpm without fusermount...
# rpmbuild -ta glusterfs-6.0.tar.gz --without fusermount
%{?_without_fusermount:%global _without_fusermount --disable-fusermount}

# geo-rep
# if you wish to compile an rpm without geo-replication support, compile like this...
# rpmbuild -ta glusterfs-6.0.tar.gz --without georeplication
%{?_without_georeplication:%global _without_georeplication --disable-georeplication}

# ipv6default
# if you wish to compile an rpm with IPv6 default...
# rpmbuild -ta glusterfs-6.0.tar.gz --with ipv6default
%{?_with_ipv6default:%global _with_ipv6default --with-ipv6-default}

# libtirpc
# if you wish to compile an rpm without TIRPC (i.e. use legacy glibc rpc)
# rpmbuild -ta glusterfs-6.0.tar.gz --without libtirpc
%{?_without_libtirpc:%global _without_libtirpc --without-libtirpc}

# Do not use libtirpc on EL6, it does not have xdr_uint64_t() and xdr_uint32_t
# Do not use libtirpc on EL7, it does not have xdr_sizeof()
%if ( 0%{?rhel} && 0%{?rhel} <= 7 )
%global _without_libtirpc --without-libtirpc
%endif


# ocf
# if you wish to compile an rpm without the OCF resource agents...
# rpmbuild -ta glusterfs-6.0.tar.gz --without ocf
%{?_without_ocf:%global _without_ocf --without-ocf}

# rdma
# if you wish to compile an rpm without rdma support, compile like this...
# rpmbuild -ta glusterfs-6.0.tar.gz --without rdma
%{?_without_rdma:%global _without_rdma --disable-ibverbs}

# No RDMA Support on 32-bit ARM
%ifarch armv7hl
%global _without_rdma --disable-ibverbs
%endif

# server
# if you wish to build rpms without server components, compile like this
# rpmbuild -ta glusterfs-6.0.tar.gz --without server
%{?_without_server:%global _without_server --without-server}

# disable server components forcefully as rhel <= 6
%if ( 0%{?rhel} )
%if (!(( "%{?dist}" == ".el6rhs" ) || ( "%{?dist}" == ".el7rhs" ) || ( "%{?dist}" == ".el7rhgs" ) || ( "%{?dist}" == ".el8rhgs" )))
%global _without_server --without-server
%endif
%endif

%global _without_extra_xlators 1
%global _without_regression_tests 1

# syslog
# if you wish to build rpms without syslog logging, compile like this
# rpmbuild -ta glusterfs-6.0.tar.gz --without syslog
%{?_without_syslog:%global _without_syslog --disable-syslog}

# disable syslog forcefully as rhel <= 6 doesn't have rsyslog or rsyslog-mmcount
# Fedora deprecated syslog, see
#  https://fedoraproject.org/wiki/Changes/NoDefaultSyslog
# (And what about RHEL7?)
%if ( 0%{?fedora} && 0%{?fedora} >= 20 ) || ( 0%{?rhel} && 0%{?rhel} <= 6 )
%global _without_syslog --disable-syslog
%endif

# tsan
# if you wish to compile an rpm with thread sanitizer...
# rpmbuild -ta glusterfs-6.0.tar.gz --with tsan
%{?_with_tsan:%global _with_tsan --enable-tsan}

%if ( 0%{?rhel} && 0%{?rhel} < 7 )
%global _with_tsan %{nil}
%endif

# valgrind
# if you wish to compile an rpm to run all processes under valgrind...
# rpmbuild -ta glusterfs-6.0.tar.gz --with valgrind
%{?_with_valgrind:%global _with_valgrind --enable-valgrind}

##-----------------------------------------------------------------------------
## All %%global definitions should be placed here and keep them sorted
##

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
%global _with_systemd true
%endif

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 7 )
%global _with_firewalld --enable-firewalld
%endif

%if 0%{?_tmpfilesdir:1}
%global _with_tmpfilesdir --with-tmpfilesdir=%{_tmpfilesdir}
%else
%global _with_tmpfilesdir --without-tmpfilesdir
%endif

# without server should also disable some server-only components
%if 0%{?_without_server:1}
%global _without_events --disable-events
%global _without_georeplication --disable-georeplication
%global _without_tiering --disable-tiering
%global _without_ocf --without-ocf
%endif

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} > 7 )
%global _usepython3 1
%global _pythonver 3
%else
%global _usepython3 0
%global _pythonver 2
%endif

# From https://fedoraproject.org/wiki/Packaging:Python#Macros
%if ( 0%{?rhel} && 0%{?rhel} <= 6 )
%{!?python2_sitelib: %global python2_sitelib %(python2 -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")}
%{!?python2_sitearch: %global python2_sitearch %(python2 -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")}
%global _rundir %{_localstatedir}/run
%endif

%if ( 0%{?_with_systemd:1} )
%global service_enable()   /bin/systemctl --quiet enable %1.service || : \
%{nil}
%global service_start()   /bin/systemctl --quiet start %1.service || : \
%{nil}
%global service_stop()    /bin/systemctl --quiet stop %1.service || :\
%{nil}
%global service_install() install -D -p -m 0644 %1.service %{buildroot}%2 \
%{nil}
# can't seem to make a generic macro that works
%global glusterd_svcfile   %{_unitdir}/glusterd.service
%global glusterfsd_svcfile %{_unitdir}/glusterfsd.service
%global glusterta_svcfile %{_unitdir}/gluster-ta-volume.service
%global glustereventsd_svcfile %{_unitdir}/glustereventsd.service
%global glusterfssharedstorage_svcfile %{_unitdir}/glusterfssharedstorage.service
%else
%global service_enable()  /sbin/chkconfig --add %1 >/dev/null 2>&1 || : \
%{nil}
%global systemd_preun() /sbin/chkconfig --del %1 >/dev/null 2>&1 || : \
%{nil}
%global systemd_postun_with_restart() /sbin/service %1 condrestart >/dev/null 2>&1 || : \
%{nil}
%global service_start()   /sbin/service %1 start >/dev/null 2>&1 || : \
%{nil}
%global service_stop()    /sbin/service %1 stop >/dev/null 2>&1 || : \
%{nil}
%global service_install() install -D -p -m 0755 %1.init %{buildroot}%2 \
%{nil}
# can't seem to make a generic macro that works
%global glusterd_svcfile   %{_sysconfdir}/init.d/glusterd
%global glusterfsd_svcfile %{_sysconfdir}/init.d/glusterfsd
%global glustereventsd_svcfile %{_sysconfdir}/init.d/glustereventsd
%endif

%{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{name}-%{version}}

# We do not want to generate useless provides and requires for xlator
# .so files to be set for glusterfs packages.
# Filter all generated:
#
# TODO: RHEL5 does not have a convenient solution
%if ( 0%{?rhel} == 6 )
# filter_setup exists in RHEL6 only
%filter_provides_in %{_libdir}/glusterfs/%{version}/
%global __filter_from_req %{?__filter_from_req} | grep -v -P '^(?!lib).*\.so.*$'
%filter_setup
%else
# modern rpm and current Fedora do not generate requires when the
# provides are filtered
%global __provides_exclude_from ^%{_libdir}/glusterfs/%{version}/.*$
%endif


##-----------------------------------------------------------------------------
## All package definitions should be placed here in alphabetical order
##
Summary:          Distributed File System
%if ( 0%{_for_fedora_koji_builds} )
Name:             glusterfs
Version:          3.8.0
Release:          0.1%{?prereltag:.%{prereltag}}%{?dist}
%else
Name:             glusterfs
Version:          6.0
Release:          6%{?dist}
ExcludeArch:      i686
%endif
License:          GPLv2 or LGPLv3+
URL:              http://docs.gluster.org/
%if ( 0%{_for_fedora_koji_builds} )
Source0:          http://bits.gluster.org/pub/gluster/glusterfs/src/glusterfs-%{version}%{?prereltag}.tar.gz
Source1:          glusterd.sysconfig
Source2:          glusterfsd.sysconfig
Source7:          glusterfsd.service
Source8:          glusterfsd.init
%else
Source0:          glusterfs-6.0.tar.gz
%endif

Requires(pre):    shadow-utils
%if ( 0%{?_with_systemd:1} )
BuildRequires:    systemd
%endif

Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
%if ( 0%{?_with_systemd:1} )
%{?systemd_requires}
%endif
%if 0%{?_with_asan:1} && !( 0%{?rhel} && 0%{?rhel} < 7 )
BuildRequires:    libasan
%endif
%if 0%{?_with_tsan:1} && !( 0%{?rhel} && 0%{?rhel} < 7 )
BuildRequires:    libtsan
%endif
BuildRequires:    git
BuildRequires:    bison flex
BuildRequires:    gcc make libtool
BuildRequires:    ncurses-devel readline-devel
BuildRequires:    libxml2-devel openssl-devel
BuildRequires:    libaio-devel libacl-devel
BuildRequires:    python%{_pythonver}-devel
%if ( 0%{?rhel} && 0%{?rhel} < 8 )
BuildRequires:    python-ctypes
%endif
%if ( 0%{?_with_ipv6default:1} ) || ( 0%{!?_without_libtirpc:1} ) || ( 0%{?rhel} && ( 0%{?rhel} >= 8 ) )
BuildRequires:    libtirpc-devel
%endif
%if ( 0%{?fedora} && 0%{?fedora} > 27 ) || ( 0%{?rhel} && 0%{?rhel} > 7 )
BuildRequires:    rpcgen
%endif
BuildRequires:    userspace-rcu-devel >= 0.7
%if ( 0%{?rhel} && 0%{?rhel} <= 6 )
BuildRequires:    automake
%endif
BuildRequires:    libuuid-devel
%if ( 0%{?_with_cmocka:1} )
BuildRequires:    libcmocka-devel >= 1.0.1
%endif
%if ( 0%{!?_without_tiering:1} )
BuildRequires:    sqlite-devel
%endif
%if ( 0%{!?_without_georeplication:1} )
BuildRequires:    libattr-devel
%endif

%if (0%{?_with_firewalld:1})
BuildRequires:    firewalld
%endif

Obsoletes:        hekafs
Obsoletes:        %{name}-common < %{version}-%{release}
Obsoletes:        %{name}-core < %{version}-%{release}
Obsoletes:        %{name}-ufo
%if ( 0%{!?_with_gnfs:1} )
Obsoletes:        %{name}-gnfs
%endif
Provides:         %{name}-common = %{version}-%{release}
Provides:         %{name}-core = %{version}-%{release}

# Patch0001: 0001-Update-rfc.sh-to-rhgs-3.5.0.patch
Patch0002: 0002-glusterd-fix-op-versions-for-RHS-backwards-compatabi.patch
Patch0003: 0003-rpc-set-bind-insecure-to-off-by-default.patch
Patch0004: 0004-glusterd-spec-fixing-autogen-issue.patch
Patch0005: 0005-libglusterfs-glusterd-Fix-compilation-errors.patch
Patch0006: 0006-build-remove-ghost-directory-entries.patch
Patch0007: 0007-build-add-RHGS-specific-changes.patch
Patch0008: 0008-secalert-remove-setuid-bit-for-fusermount-glusterfs.patch
Patch0009: 0009-build-introduce-security-hardening-flags-in-gluster.patch
Patch0010: 0010-spec-fix-add-pre-transaction-scripts-for-geo-rep-and.patch
Patch0011: 0011-rpm-glusterfs-devel-for-client-builds-should-not-dep.patch
Patch0012: 0012-build-add-pretrans-check.patch
Patch0013: 0013-glusterd-fix-info-file-checksum-mismatch-during-upgr.patch
Patch0014: 0014-build-spec-file-conflict-resolution.patch
Patch0015: 0015-build-randomize-temp-file-names-in-pretrans-scriptle.patch
Patch0016: 0016-glusterd-parallel-readdir-Change-the-op-version-of-p.patch
Patch0017: 0017-glusterd-Revert-op-version-for-cluster.max-brick-per.patch
Patch0018: 0018-cli-Add-message-for-user-before-modifying-brick-mult.patch
Patch0019: 0019-build-launch-glusterd-upgrade-after-all-new-bits-are.patch
Patch0020: 0020-spec-unpackaged-files-found-for-RHEL-7-client-build.patch
Patch0021: 0021-cli-glusterfsd-remove-copyright-information.patch
Patch0022: 0022-cli-Remove-upstream-doc-reference.patch
Patch0023: 0023-hooks-remove-selinux-hooks.patch
Patch0024: 0024-glusterd-Make-localtime-logging-option-invisible-in-.patch
Patch0025: 0025-build-make-RHGS-version-available-for-server.patch
Patch0026: 0026-glusterd-Introduce-daemon-log-level-cluster-wide-opt.patch
Patch0027: 0027-glusterd-change-op-version-of-fips-mode-rchecksum.patch
Patch0028: 0028-glusterd-Reset-op-version-for-features.shard-deletio.patch
Patch0029: 0029-glusterd-Reset-op-version-for-features.shard-lru-lim.patch
Patch0030: 0030-selinux-glusterd-add-features.selinux-to-glusterd-vo.patch
Patch0031: 0031-glusterd-turn-off-selinux-feature-in-downstream.patch
Patch0032: 0032-glusterd-update-gd-op-version-to-3_7_0.patch
Patch0033: 0033-build-add-missing-explicit-package-dependencies.patch
Patch0034: 0034-glusterd-introduce-a-new-op-version-for-rhgs-3.4.3.patch
Patch0035: 0035-glusterd-tag-rebalance-mgmt_v3-command-to-op-version.patch
Patch0036: 0036-build-add-conditional-dependency-on-server-for-devel.patch
Patch0037: 0037-cli-change-the-warning-message.patch
Patch0038: 0038-spec-avoid-creation-of-temp-file-in-lua-script.patch
Patch0039: 0039-cli-fix-query-to-user-during-brick-mux-selection.patch
Patch0040: 0040-build-Remove-unsupported-test-cases-failing-consiste.patch
Patch0041: 0041-tests-geo-rep-Build-failed-in-Jenkins-for-test-bug-1.patch
Patch0042: 0042-spec-client-server-Builds-are-failing-on-rhel-6.patch
Patch0043: 0043-inode-don-t-dump-the-whole-table-to-CLI.patch
Patch0044: 0044-cluster-ec-Don-t-enqueue-an-entry-if-it-is-already-h.patch
Patch0045: 0045-glusterd-fix-txn-id-mem-leak.patch
Patch0046: 0046-protocol-client-Do-not-fallback-to-anon-fd-if-fd-is-.patch
Patch0047: 0047-client-rpc-Fix-the-payload-being-sent-on-the-wire.patch
Patch0048: 0048-gfapi-Unblock-epoll-thread-for-upcall-processing.patch
Patch0049: 0049-transport-socket-log-shutdown-msg-occasionally.patch
Patch0050: 0050-geo-rep-Fix-syncing-multiple-rename-of-symlink.patch
Patch0051: 0051-spec-update-rpm-install-condition.patch
Patch0052: 0052-geo-rep-IPv6-support.patch
Patch0053: 0053-Revert-packaging-ganesha-remove-glusterfs-ganesha-su.patch
Patch0054: 0054-Revert-glusterd-storhaug-remove-ganesha.patch
Patch0055: 0055-Revert-storhaug-HA-first-step-remove-resource-agents.patch
Patch0056: 0056-common-ha-fixes-for-Debian-based-systems.patch
Patch0057: 0057-ganesha-scripts-Remove-export-entries-from-ganesha.c.patch
Patch0058: 0058-glusterd-ganesha-During-volume-delete-remove-the-gan.patch
Patch0059: 0059-glusterd-ganesha-throw-proper-error-for-gluster-nfs-.patch
Patch0060: 0060-ganesha-scripts-Stop-ganesha-process-on-all-nodes-if.patch
Patch0061: 0061-ganesha-allow-refresh-config-and-volume-export-unexp.patch
Patch0062: 0062-glusterd-ganesha-perform-removal-of-ganesha.conf-on-.patch
Patch0063: 0063-glusterd-ganesha-update-cache-invalidation-properly-.patch
Patch0064: 0064-glusterd-ganesha-return-proper-value-in-pre_setup.patch
Patch0065: 0065-ganesha-scripts-remove-dependency-over-export-config.patch
Patch0066: 0066-glusterd-ganesha-add-proper-NULL-check-in-manage_exp.patch
Patch0067: 0067-ganesha-minor-improvments-for-commit-e91cdf4-17081.patch
Patch0068: 0068-common-ha-surviving-ganesha.nfsd-not-put-in-grace-on.patch
Patch0069: 0069-common-ha-enable-and-disable-selinux-ganesha_use_fus.patch
Patch0070: 0070-packaging-glusterfs-ganesha-update-sometimes-fails-s.patch
Patch0071: 0071-common-ha-enable-and-disable-selinux-gluster_use_exe.patch
Patch0072: 0072-ganesha-ha-don-t-set-SELinux-booleans-if-SELinux-is-.patch
Patch0073: 0073-build-remove-ganesha-dependency-on-selinux-policy.patch
Patch0074: 0074-common-ha-enable-pacemaker-at-end-of-setup.patch
Patch0075: 0075-common-ha-Fix-an-incorrect-syntax-during-setup.patch
Patch0076: 0076-glusterd-ganesha-change-voltype-for-ganesha.enable-i.patch
Patch0077: 0077-glusterd-ganesha-create-remove-export-file-only-from.patch
Patch0078: 0078-common-ha-scripts-pass-the-list-of-servers-properly-.patch
Patch0079: 0079-common-ha-All-statd-related-files-need-to-be-owned-b.patch
Patch0080: 0080-glusterd-ganesha-Skip-non-ganesha-nodes-properly-for.patch
Patch0081: 0081-ganesha-ha-ensure-pacemaker-is-enabled-after-setup.patch
Patch0082: 0082-build-Add-dependency-on-netstat-for-glusterfs-ganesh.patch
Patch0083: 0083-common-ha-enable-and-disable-selinux-ganesha_use_fus.patch
Patch0084: 0084-glusterd-Fix-duplicate-client_op_version-in-info-fil.patch
Patch0085: 0085-Revert-all-remove-code-which-is-not-being-considered.patch
Patch0086: 0086-Revert-tiering-remove-the-translator-from-build-and-.patch
Patch0087: 0087-ganesha-fixing-minor-issues-after-the-backport-from-.patch
Patch0088: 0088-tier-fix-failures-noticed-during-tier-start-and-tier.patch
Patch0089: 0089-glusterd-gNFS-On-post-upgrade-to-3.2-disable-gNFS-fo.patch
Patch0090: 0090-Revert-build-conditionally-build-legacy-gNFS-server-.patch
Patch0091: 0091-glusterd-gNFS-explicitly-set-nfs.disable-to-off-afte.patch
Patch0092: 0092-logging-Fix-GF_LOG_OCCASSIONALLY-API.patch
Patch0093: 0093-glusterd-Change-op-version-of-cache-invalidation-in-.patch
Patch0094: 0094-glusterd-load-ctime-in-the-client-graph-only-if-it-s.patch
Patch0095: 0095-cluster-afr-Remove-local-from-owners_list-on-failure.patch
Patch0096: 0096-core-Brick-is-not-able-to-detach-successfully-in-bri.patch
Patch0097: 0097-glusterd-tier-while-doing-an-attach-tier-the-self-he.patch
Patch0098: 0098-mgmt-shd-Implement-multiplexing-in-self-heal-daemon.patch
Patch0099: 0099-client-fini-return-fini-after-rpc-cleanup.patch
Patch0100: 0100-clnt-rpc-ref-leak-during-disconnect.patch
Patch0101: 0101-shd-mux-Fix-coverity-issues-introduced-by-shd-mux-pa.patch
Patch0102: 0102-rpc-transport-Missing-a-ref-on-dict-while-creating-t.patch
Patch0103: 0103-dht-NULL-check-before-setting-error-flag.patch
Patch0104: 0104-afr-shd-Cleanup-self-heal-daemon-resources-during-af.patch
Patch0105: 0105-core-Log-level-changes-do-not-effect-on-running-clie.patch
Patch0106: 0106-libgfchangelog-use-find_library-to-locate-shared-lib.patch
Patch0107: 0107-gfapi-add-function-to-set-client-pid.patch
Patch0108: 0108-afr-add-client-pid-to-all-gf_event-calls.patch
Patch0109: 0109-glusterd-Optimize-glusterd-handshaking-code-path.patch
Patch0110: 0110-tier-shd-glusterd-with-shd-mux-the-shd-volfile-path-.patch
Patch0111: 0111-glusterd-fix-loading-ctime-in-client-graph-logic.patch
Patch0112: 0112-geo-rep-fix-incorrectly-formatted-authorized_keys.patch
Patch0113: 0113-spec-Glusterd-did-not-start-by-default-after-node-re.patch
Patch0114: 0114-core-fix-hang-issue-in-__gf_free.patch
Patch0115: 0115-core-only-log-seek-errors-if-SEEK_HOLE-SEEK_DATA-is-.patch
Patch0116: 0116-cluster-ec-fix-fd-reopen.patch
Patch0117: 0117-spec-Remove-thin-arbiter-package.patch
Patch0118: 0118-tests-mark-thin-arbiter-test-ta.t-as-bad.patch
Patch0119: 0119-glusterd-provide-a-way-to-detach-failed-node.patch
Patch0120: 0120-glusterd-shd-Keep-a-ref-on-volinfo-until-attach-rpc-.patch
Patch0121: 0121-spec-glusterfs-devel-for-client-build-should-not-dep.patch
Patch0122: 0122-posix-ctime-Fix-stat-time-attributes-inconsistency-d.patch
Patch0123: 0123-ctime-Fix-log-repeated-logging-during-open.patch
Patch0124: 0124-spec-remove-duplicate-references-to-files.patch
Patch0125: 0125-glusterd-define-dumpops-in-the-xlator_api-of-gluster.patch
Patch0126: 0126-cluster-dht-refactor-dht-lookup-functions.patch
Patch0127: 0127-cluster-dht-Refactor-dht-lookup-functions.patch
Patch0128: 0128-glusterd-Fix-bulkvoldict-thread-logic-in-brick-multi.patch
Patch0129: 0129-core-handle-memory-accounting-correctly.patch
Patch0130: 0130-tier-test-new-tier-cmds.t-fails-after-a-glusterd-res.patch
Patch0131: 0131-tests-dht-Test-that-lookups-are-sent-post-brick-up.patch
Patch0132: 0132-glusterd-remove-duplicate-occurrence-of-features.sel.patch
Patch0133: 0133-glusterd-enable-fips-mode-rchecksum-for-new-volumes.patch
Patch0134: 0134-performance-write-behind-remove-request-from-wip-lis.patch
Patch0135: 0135-geo-rep-fix-incorrectly-formatted-authorized_keys.patch
Patch0136: 0136-glusterd-fix-inconsistent-global-option-output-in-vo.patch
Patch0137: 0137-shd-glusterd-Serialize-shd-manager-to-prevent-race-c.patch
Patch0138: 0138-glusterd-Add-gluster-volume-stop-operation-to-gluste.patch
Patch0139: 0139-ec-shd-Cleanup-self-heal-daemon-resources-during-ec-.patch
Patch0140: 0140-cluster-ec-Reopen-shouldn-t-happen-with-O_TRUNC.patch
Patch0141: 0141-socket-ssl-fix-crl-handling.patch
Patch0142: 0142-lock-check-null-value-of-dict-to-avoid-log-flooding.patch
Patch0143: 0143-packaging-Change-the-dependency-on-nfs-ganesha-to-2..patch
Patch0144: 0144-cluster-ec-honor-contention-notifications-for-partia.patch
Patch0145: 0145-core-Capture-process-memory-usage-at-the-time-of-cal.patch
Patch0146: 0146-dht-Custom-xattrs-are-not-healed-in-case-of-add-bric.patch
Patch0147: 0147-glusterd-bulkvoldict-thread-is-not-handling-all-volu.patch
Patch0148: 0148-cluster-dht-Lookup-all-files-when-processing-directo.patch
Patch0149: 0149-glusterd-Optimize-code-to-copy-dictionary-in-handsha.patch
Patch0150: 0150-libglusterfs-define-macros-needed-for-cloudsync.patch
Patch0151: 0151-mgmt-glusterd-Make-changes-related-to-cloudsync-xlat.patch
Patch0152: 0152-storage-posix-changes-with-respect-to-cloudsync.patch
Patch0153: 0153-features-cloudsync-Added-some-new-functions.patch
Patch0154: 0154-cloudsync-cvlt-Cloudsync-plugin-for-commvault-store.patch
Patch0155: 0155-cloudsync-Make-readdirp-return-stat-info-of-all-the-.patch
Patch0156: 0156-cloudsync-Fix-bug-in-cloudsync-fops-c.py.patch
Patch0157: 0157-afr-frame-Destroy-frame-after-afr_selfheal_entry_gra.patch
Patch0158: 0158-glusterfsd-cleanup-Protect-graph-object-under-a-lock.patch
Patch0159: 0159-glusterd-add-an-op-version-check.patch
Patch0160: 0160-geo-rep-Geo-rep-help-text-issue.patch
Patch0161: 0161-geo-rep-Fix-rename-with-existing-destination-with-sa.patch
Patch0162: 0162-geo-rep-Fix-sync-method-config.patch
Patch0163: 0163-geo-rep-Fix-sync-hang-with-tarssh.patch
Patch0164: 0164-cluster-ec-Fix-handling-of-heal-info-cases-without-l.patch
Patch0165: 0165-tests-shd-Add-test-coverage-for-shd-mux.patch
Patch0166: 0166-glusterd-svc-glusterd_svcs_stop-should-call-individu.patch
Patch0167: 0167-glusterd-shd-Optimize-the-glustershd-manager-to-send.patch
Patch0168: 0168-cluster-dht-Fix-directory-perms-during-selfheal.patch
Patch0169: 0169-Build-Fix-spec-to-enable-rhel8-client-build.patch
Patch0170: 0170-geo-rep-Convert-gfid-conflict-resolutiong-logs-into-.patch
Patch0171: 0171-posix-add-storage.reserve-size-option.patch
Patch0172: 0172-ec-fini-Fix-race-with-ec_fini-and-ec_notify.patch
Patch0173: 0173-glusterd-store-fips-mode-rchecksum-option-in-the-inf.patch
Patch0174: 0174-xlator-log-Add-more-logging-in-xlator_is_cleanup_sta.patch
Patch0175: 0175-ec-fini-Fix-race-between-xlator-cleanup-and-on-going.patch
Patch0176: 0176-features-shard-Fix-crash-during-background-shard-del.patch
Patch0177: 0177-features-shard-Fix-extra-unref-when-inode-object-is-.patch
Patch0178: 0178-Cluster-afr-Don-t-treat-all-bricks-having-metadata-p.patch
Patch0179: 0179-tests-Fix-split-brain-favorite-child-policy.t-failur.patch
Patch0180: 0180-ganesha-scripts-Make-generate-epoch.py-python3-compa.patch
Patch0181: 0181-afr-log-before-attempting-data-self-heal.patch
Patch0182: 0182-geo-rep-fix-mountbroker-setup.patch
Patch0183: 0183-glusterd-svc-Stop-stale-process-using-the-glusterd_p.patch
Patch0184: 0184-tests-Add-gating-configuration-file-for-rhel8.patch
Patch0185: 0185-gfapi-provide-an-api-for-setting-statedump-path.patch
Patch0186: 0186-cli-Remove-brick-warning-seems-unnecessary.patch
Patch0187: 0187-gfapi-statedump_path-add-proper-version-number.patch
Patch0188: 0188-features-shard-Fix-integer-overflow-in-block-count-a.patch
Patch0189: 0189-features-shard-Fix-block-count-accounting-upon-trunc.patch
Patch0190: 0190-Build-removing-the-hardcoded-usage-of-python3.patch
Patch0191: 0191-Build-Update-python-shebangs-based-on-version.patch
Patch0192: 0192-build-Ensure-gluster-cli-package-is-built-as-part-of.patch

%description
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package includes the glusterfs binary, the glusterfsd daemon and the
libglusterfs and glusterfs translator modules common to both GlusterFS server
and client framework.

%package api
Summary:          GlusterFS api library
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-client-xlators%{?_isa} = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description api
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the glusterfs libgfapi library.

%package api-devel
Summary:          Development Libraries
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-devel%{?_isa} = %{version}-%{release}
Requires:         libacl-devel
Requires:         %{name}-api%{?_isa} = %{version}-%{release}

%description api-devel
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the api include files.

%package cli
Summary:          GlusterFS CLI
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description cli
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the GlusterFS CLI application and its man page

%package cloudsync-plugins
Summary:          Cloudsync Plugins
BuildRequires:    libcurl-devel

%description cloudsync-plugins
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides cloudsync plugins for archival feature.

%package devel
Summary:          Development Libraries
Requires:         %{name}%{?_isa} = %{version}-%{release}
# Needed for the Glupy examples to work
%if ( 0%{!?_without_extra_xlators:1} )
Requires:         %{name}-extra-xlators%{?_isa} = %{version}-%{release}
%endif
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
%if ( 0%{!?_without_server:1} )
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
%endif

%description devel
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the development libraries and include files.

%if ( 0%{!?_without_extra_xlators:1} )
%package extra-xlators
Summary:          Extra Gluster filesystem Translators
# We need python-gluster rpm for gluster module's __init__.py in Python
# site-packages area
Requires:         python%{_pythonver}-gluster = %{version}-%{release}
Requires:         python%{_pythonver}

%description extra-xlators
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides extra filesystem Translators, such as Glupy,
for GlusterFS.
%endif

%package fuse
Summary:          Fuse client
BuildRequires:    fuse-devel
Requires:         attr
Requires:         psmisc

Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-client-xlators%{?_isa} = %{version}-%{release}

Obsoletes:        %{name}-client < %{version}-%{release}
Provides:         %{name}-client = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description fuse
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides support to FUSE based clients and inlcudes the
glusterfs(d) binary.

%if ( 0%{!?_without_server:1} )
%package ganesha
Summary:          NFS-Ganesha configuration
Group:            Applications/File

Requires:         %{name}-server%{?_isa} = %{version}-%{release}
Requires:         nfs-ganesha-gluster >= 2.7.3
Requires:         pcs, dbus
%if ( 0%{?rhel} && 0%{?rhel} == 6 )
Requires:         cman, pacemaker, corosync
%endif

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} > 5 )
# we need portblock resource-agent in 3.9.5 and later.
Requires:         resource-agents >= 3.9.5
Requires:         net-tools
%endif

%if ( 0%{?fedora} && 0%{?fedora} > 25  || ( 0%{?rhel} && 0%{?rhel} > 6 ) )
%if ( 0%{?rhel} )
Requires: selinux-policy >= 3.13.1-160
Requires(post):   policycoreutils-python
Requires(postun): policycoreutils-python
%else
Requires(post):   policycoreutils-python-utils
Requires(postun): policycoreutils-python-utils
%endif
%endif

%description ganesha
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the configuration and related files for using
NFS-Ganesha as the NFS server using GlusterFS
%endif

%if ( 0%{!?_without_georeplication:1} )
%package geo-replication
Summary:          GlusterFS Geo-replication
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
Requires:         python%{_pythonver}
Requires:         python%{_pythonver}-prettytable
Requires:         python%{_pythonver}-gluster = %{version}-%{release}

Requires:         rsync
Requires:         util-linux
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description geo-replication
GlusterFS is a distributed file-system capable of scaling to several
peta-bytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file system in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in userspace and easily manageable.

This package provides support to geo-replication.
%endif

%package libs
Summary:          GlusterFS common libraries

%description libs
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the base GlusterFS libraries

%package -n python%{_pythonver}-gluster
Summary:          GlusterFS python library
Requires:         python%{_pythonver}
%if ( ! %{_usepython3} )
%{?python_provide:%python_provide python-gluster}
Provides:         python-gluster = %{version}-%{release}
Obsoletes:        python-gluster < 3.10
%endif

%description -n python%{_pythonver}-gluster
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package contains the python modules of GlusterFS and own gluster
namespace.

%if ( 0%{!?_without_rdma:1} )
%package rdma
Summary:          GlusterFS rdma support for ib-verbs
%if ( 0%{?fedora} && 0%{?fedora} > 26 )
BuildRequires:    rdma-core-devel
%else
BuildRequires:    libibverbs-devel
BuildRequires:    librdmacm-devel >= 1.0.15
%endif
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description rdma
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides support to ib-verbs library.
%endif

%if ( 0%{!?_without_regression_tests:1} )
%package regression-tests
Summary:          Development Tools
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-fuse%{?_isa} = %{version}-%{release}
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
## thin provisioning support
Requires:         lvm2 >= 2.02.89
Requires:         perl(App::Prove) perl(Test::Harness) gcc util-linux-ng
Requires:         python%{_pythonver}
Requires:         attr dbench file git libacl-devel net-tools
Requires:         nfs-utils xfsprogs yajl psmisc bc

%description regression-tests
The Gluster Test Framework, is a suite of scripts used for
regression testing of Gluster.
%endif

%if ( 0%{!?_without_ocf:1} )
%package resource-agents
Summary:          OCF Resource Agents for GlusterFS
License:          GPLv3+
BuildArch:        noarch
# this Group handling comes from the Fedora resource-agents package
# for glusterd
Requires:         %{name}-server = %{version}-%{release}
# depending on the distribution, we need pacemaker or resource-agents
Requires:         %{_prefix}/lib/ocf/resource.d

%description resource-agents
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the resource agents which plug glusterd into
Open Cluster Framework (OCF) compliant cluster resource managers,
like Pacemaker.
%endif

%if ( 0%{!?_without_server:1} )
%package server
Summary:          Clustered file-system server
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-cli%{?_isa} = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
# some daemons (like quota) use a fuse-mount, glusterfsd is part of -fuse
Requires:         %{name}-fuse%{?_isa} = %{version}-%{release}
# self-heal daemon, rebalance, nfs-server etc. are actually clients
Requires:         %{name}-api%{?_isa} = %{version}-%{release}
Requires:         %{name}-client-xlators%{?_isa} = %{version}-%{release}
# lvm2 for snapshot, and nfs-utils and rpcbind/portmap for gnfs server
Requires:         lvm2
Requires:         nfs-utils
%if ( 0%{?_with_systemd:1} )
%{?systemd_requires}
%else
Requires(post):   /sbin/chkconfig
Requires(preun):  /sbin/service
Requires(preun):  /sbin/chkconfig
Requires(postun): /sbin/service
%endif
%if (0%{?_with_firewalld:1})
# we install firewalld rules, so we need to have the directory owned
%if ( 0%{!?rhel} )
# not on RHEL because firewalld-filesystem appeared in 7.3
# when EL7 rpm gets weak dependencies we can add a Suggests:
Requires:         firewalld-filesystem
%endif
%endif
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
Requires:         rpcbind
%else
Requires:         portmap
%endif
%if ( 0%{?rhel} && 0%{?rhel} <= 6 )
Requires:         python-argparse
%endif
%if ( 0%{?fedora} && 0%{?fedora} > 27 ) || ( 0%{?rhel} && 0%{?rhel} > 7 )
Requires:         python%{_pythonver}-pyxattr
%else
Requires:         pyxattr
%endif
%if (0%{?_with_valgrind:1})
Requires:         valgrind
%endif

%description server
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the glusterfs server daemon.
%endif

%package client-xlators
Summary:          GlusterFS client-side translators
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description client-xlators
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the translators needed on any GlusterFS client.

%if ( 0%{!?_without_events:1} )
%package events
Summary:          GlusterFS Events
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
Requires:         python%{_pythonver} python%{_pythonver}-prettytable
Requires:         python%{_pythonver}-gluster = %{version}-%{release}
%if ( 0%{?rhel} && 0%{?rhel} < 8 )
Requires:         python-requests
%else
Requires:         python%{_pythonver}-requests
%endif
%if ( 0%{?rhel} && 0%{?rhel} < 7 )
Requires:         python-argparse
%endif
%if ( 0%{?_with_systemd:1} )
%{?systemd_requires}
%endif

%description events
GlusterFS Events

%endif

%prep
%setup -q -n %{name}-%{version}%{?prereltag}

# sanitization scriptlet for patches with file renames
ls %{_topdir}/SOURCES/*.patch | sort | \
while read p
do
    # if the destination file exists, its most probably stale
    # so we must remove it
    rename_to=( $(grep -i 'rename to' $p | cut -f 3 -d ' ') )
    if [ ${#rename_to[*]} -gt 0 ]; then
        for f in ${rename_to[*]}
        do
            if [ -f $f ]; then
                rm -f $f
            elif [ -d $f ]; then
                rm -rf $f
            fi
        done
    fi

    SOURCE_FILES=( $(egrep '^\-\-\- a/' $p | cut -f 2- -d '/') )
    DEST_FILES=( $(egrep '^\+\+\+ b/' $p | cut -f 2- -d '/') )
    EXCLUDE_DOCS=()
    for idx in ${!SOURCE_FILES[@]}; do
        # skip the doc 
        source_file=${SOURCE_FILES[$idx]}
        dest_file=${DEST_FILES[$idx]}
        if [[ "$dest_file" =~ ^doc/.+ ]]; then
            if [ "$source_file" != "dev/null" ] && [ ! -f "$dest_file" ]; then
                # if patch is being applied to a doc file and if the doc file
                # hasn't been added so far then we need to exclude it
                EXCLUDE_DOCS=( ${EXCLUDE_DOCS[*]} "$dest_file" )
            fi
        fi
    done
    EXCLUDE_DOCS_OPT=""
    for doc in ${EXCLUDE_DOCS}; do
        EXCLUDE_DOCS_OPT="--exclude=$doc $EXCLUDE_DOCS_OPT"
    done

    # HACK to fix build
    bn=$(basename $p)
    if [ "$bn" == "0085-Revert-all-remove-code-which-is-not-being-considered.patch" ]; then
        (patch -p1 -u -F3 < $p || :)
        if [ -f libglusterfs/Makefile.am.rej ]; then
            sed -i -e 's/^SUBDIRS = src/SUBDIRS = src src\/gfdb/g;s/^CLEANFILES = /CLEANFILES =/g' libglusterfs/Makefile.am
        fi
    elif [ "$bn" == "0053-Revert-packaging-ganesha-remove-glusterfs-ganesha-su.patch" ]; then
        (patch -p1 < $p || :)
    elif [ "$bn" == "0055-Revert-storhaug-HA-first-step-remove-resource-agents.patch" ]; then
        (patch -p1 < $p || :)
    elif [ "$bn" == "0090-Revert-build-conditionally-build-legacy-gNFS-server-.patch" ]; then
        (patch -p1 < $p || :)
    elif [ "$bn" == "0117-spec-Remove-thin-arbiter-package.patch" ]; then
        (patch -p1 < $p || :)
    elif [ "$bn" == "0023-hooks-remove-selinux-hooks.patch" ]; then
        (patch -p1 < $p || :)
    elif [ "$bn" == "0042-spec-client-server-Builds-are-failing-on-rhel-6.patch" ]; then
        (patch -p1 < $p || :)
    else
        # apply the patch with 'git apply'
        git apply -p1 --exclude=rfc.sh \
                      --exclude=.gitignore \
                      --exclude=.testignore \
                      --exclude=MAINTAINERS \
                      --exclude=extras/checkpatch.pl \
                      --exclude=build-aux/checkpatch.pl \
                      --exclude='tests/*' \
                      ${EXCLUDE_DOCS_OPT} \
                      $p
    fi

done

echo "fixing python shebangs..."
%if ( %{_usepython3} )
    for i in `find . -type f -exec bash -c "if file {} | grep 'Python script, ASCII text executable' >/dev/null; then echo {}; fi" ';'`; do
        sed -i -e 's|^#!/usr/bin/python.*|#!%{__python3}|' -e 's|^#!/usr/bin/env python.*|#!%{__python3}|' $i
    done
%else
    for f in api events extras geo-replication libglusterfs tools xlators; do
        find $f -type f -exec sed -i 's|/usr/bin/python3|/usr/bin/python2|' {} \;
    done
%endif

%build

# In RHEL7 few hardening flags are available by default, however the RELRO
# default behaviour is partial, convert to full
%if ( 0%{?rhel} && 0%{?rhel} >= 7 )
LDFLAGS="$RPM_LD_FLAGS -Wl,-z,relro,-z,now"
export LDFLAGS
%else
%if ( 0%{?rhel} && 0%{?rhel} == 6 )
CFLAGS="$RPM_OPT_FLAGS -fPIE -DPIE"
LDFLAGS="$RPM_LD_FLAGS -pie -Wl,-z,relro,-z,now"
%else
#It appears that with gcc-4.1.2 in RHEL5 there is an issue using both -fPIC and
 # -fPIE that makes -z relro not work; -fPIE seems to undo what -fPIC does
CFLAGS="$CFLAGS $RPM_OPT_FLAGS"
LDFLAGS="$RPM_LD_FLAGS -Wl,-z,relro,-z,now"
%endif
export CFLAGS
export LDFLAGS
%endif

./autogen.sh && %configure \
        %{?_with_asan} \
        %{?_with_cmocka} \
        %{?_with_debug} \
        %{?_with_firewalld} \
        %{?_with_tmpfilesdir} \
        %{?_with_tsan} \
        %{?_with_valgrind} \
        %{?_without_epoll} \
        %{?_without_events} \
        %{?_without_fusermount} \
        %{?_without_georeplication} \
        %{?_without_ocf} \
        %{?_without_rdma} \
        %{?_without_server} \
        %{?_without_syslog} \
        %{?_without_tiering} \
        %{?_with_ipv6default} \
        %{?_without_libtirpc}

# fix hardening and remove rpath in shlibs
%if ( 0%{?fedora} && 0%{?fedora} > 17 ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
sed -i 's| \\\$compiler_flags |&\\\$LDFLAGS |' libtool
%endif
sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|' libtool
sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|' libtool

make %{?_smp_mflags}

%check
make check

%install
rm -rf %{buildroot}
make install DESTDIR=%{buildroot}
%if ( 0%{!?_without_server:1} )
%if ( 0%{_for_fedora_koji_builds} )
install -D -p -m 0644 %{SOURCE1} \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterd
install -D -p -m 0644 %{SOURCE2} \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterfsd
%else
install -D -p -m 0644 extras/glusterd-sysconfig \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterd
%endif
%endif

mkdir -p %{buildroot}%{_localstatedir}/log/glusterd
mkdir -p %{buildroot}%{_localstatedir}/log/glusterfs
mkdir -p %{buildroot}%{_localstatedir}/log/glusterfsd
mkdir -p %{buildroot}%{_rundir}/gluster

# Remove unwanted files from all the shared libraries
find %{buildroot}%{_libdir} -name '*.a' -delete
find %{buildroot}%{_libdir} -name '*.la' -delete

# Remove installed docs, the ones we want are included by %%doc, in
# /usr/share/doc/glusterfs or /usr/share/doc/glusterfs-x.y.z depending
# on the distribution
%if ( 0%{?fedora} && 0%{?fedora} > 19 ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
rm -rf %{buildroot}%{_pkgdocdir}/*
%else
rm -rf %{buildroot}%{_defaultdocdir}/%{name}
mkdir -p %{buildroot}%{_pkgdocdir}
%endif
head -50 ChangeLog > ChangeLog.head && mv ChangeLog.head ChangeLog
cat << EOM >> ChangeLog

More commit messages for this ChangeLog can be found at
https://forge.gluster.org/glusterfs-core/glusterfs/commits/v%{version}%{?prereltag}
EOM

# Remove benchmarking and other unpackaged files
# make install always puts these in %%{_defaultdocdir}/%%{name} so don't
# use %%{_pkgdocdir}; that will be wrong on later Fedora distributions
rm -rf %{buildroot}%{_defaultdocdir}/%{name}/benchmarking
rm -f %{buildroot}%{_defaultdocdir}/%{name}/glusterfs-mode.el
rm -f %{buildroot}%{_defaultdocdir}/%{name}/glusterfs.vim

%if ( 0%{!?_without_server:1} )
# Create working directory
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd

# Update configuration file to /var/lib working directory
sed -i 's|option working-directory /etc/glusterd|option working-directory %{_sharedstatedir}/glusterd|g' \
    %{buildroot}%{_sysconfdir}/glusterfs/glusterd.vol
%endif

# Install glusterfsd .service or init.d file
%if ( 0%{!?_without_server:1} )
%if ( 0%{_for_fedora_koji_builds} )
%service_install glusterfsd %{glusterfsd_svcfile}
%endif
%endif

install -D -p -m 0644 extras/glusterfs-logrotate \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfs

# ganesha ghosts
%if ( 0%{!?_without_server:1} )
mkdir -p %{buildroot}%{_sysconfdir}/ganesha
touch %{buildroot}%{_sysconfdir}/ganesha/ganesha-ha.conf
mkdir -p %{buildroot}%{_localstatedir}/run/gluster/shared_storage/nfs-ganesha/
touch %{buildroot}%{_localstatedir}/run/gluster/shared_storage/nfs-ganesha/ganesha.conf
touch %{buildroot}%{_localstatedir}/run/gluster/shared_storage/nfs-ganesha/ganesha-ha.conf
%endif

%if ( 0%{!?_without_georeplication:1} )
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/geo-replication
touch %{buildroot}%{_sharedstatedir}/glusterd/geo-replication/gsyncd_template.conf
install -D -p -m 0644 extras/glusterfs-georep-logrotate \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfs-georep
%endif

%if ( 0%{!?_without_server:1} )
touch %{buildroot}%{_sharedstatedir}/glusterd/glusterd.info
touch %{buildroot}%{_sharedstatedir}/glusterd/options
subdirs=(add-brick create copy-file delete gsync-create remove-brick reset set start stop)
for dir in ${subdirs[@]}; do
    mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/"$dir"/{pre,post}
done
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/glustershd
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/peers
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/vols
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/nfs/run
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/bitd
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/quotad
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/scrub
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/snaps
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/ss_brick
touch %{buildroot}%{_sharedstatedir}/glusterd/nfs/nfs-server.vol
touch %{buildroot}%{_sharedstatedir}/glusterd/nfs/run/nfs.pid
%endif

find ./tests ./run-tests.sh -type f | cpio -pd %{buildroot}%{_prefix}/share/glusterfs

## Install bash completion for cli
install -p -m 0744 -D extras/command-completion/gluster.bash \
    %{buildroot}%{_sysconfdir}/bash_completion.d/gluster

%if ( 0%{!?_without_server:1} )
echo "RHGS 3.5" > %{buildroot}%{_datadir}/glusterfs/release
%endif

%clean
rm -rf %{buildroot}

##-----------------------------------------------------------------------------
## All %%post should be placed here and keep them sorted
##
%post
/sbin/ldconfig
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
%systemd_postun_with_restart rsyslog
%endif
%endif
exit 0

%post api
/sbin/ldconfig

%if ( 0%{!?_without_events:1} )
%post events
%service_enable glustereventsd
%endif

%if ( 0%{!?_without_server:1} )
%if ( 0%{?fedora} && 0%{?fedora} > 25 || ( 0%{?rhel} && 0%{?rhel} > 6 ) )
%post ganesha
semanage boolean -m ganesha_use_fusefs --on
exit 0
%endif
%endif

%if ( 0%{!?_without_georeplication:1} )
%post geo-replication
if [ $1 -ge 1 ]; then
    %systemd_postun_with_restart glusterd
fi
exit 0
%endif

%post libs
/sbin/ldconfig

%if ( 0%{!?_without_server:1} )
%post server
# Legacy server
%service_enable glusterd
%if ( 0%{_for_fedora_koji_builds} )
%service_enable glusterfsd
%endif
# ".cmd_log_history" is renamed to "cmd_history.log" in GlusterFS-3.7 .
# While upgrading glusterfs-server package form GlusterFS version <= 3.6 to
# GlusterFS version 3.7, ".cmd_log_history" should be renamed to
# "cmd_history.log" to retain cli command history contents.
if [ -f %{_localstatedir}/log/glusterfs/.cmd_log_history ]; then
    mv %{_localstatedir}/log/glusterfs/.cmd_log_history \
       %{_localstatedir}/log/glusterfs/cmd_history.log
fi

# Genuine Fedora (and EPEL) builds never put gluster files in /etc; if
# there are any files in /etc from a prior gluster.org install, move them
# to /var/lib. (N.B. Starting with 3.3.0 all gluster files are in /var/lib
# in gluster.org RPMs.) Be careful to copy them on the off chance that
# /etc and /var/lib are on separate file systems
if [ -d /etc/glusterd -a ! -h %{_sharedstatedir}/glusterd ]; then
    mkdir -p %{_sharedstatedir}/glusterd
    cp -a /etc/glusterd %{_sharedstatedir}/glusterd
    rm -rf /etc/glusterd
    ln -sf %{_sharedstatedir}/glusterd /etc/glusterd
fi

# Rename old volfiles in an RPM-standard way.  These aren't actually
# considered package config files, so %%config doesn't work for them.
if [ -d %{_sharedstatedir}/glusterd/vols ]; then
    for file in $(find %{_sharedstatedir}/glusterd/vols -name '*.vol'); do
        newfile=${file}.rpmsave
        echo "warning: ${file} saved as ${newfile}"
        cp ${file} ${newfile}
    done
fi

# add marker translator
# but first make certain that there are no old libs around to bite us
# BZ 834847
if [ -e /etc/ld.so.conf.d/glusterfs.conf ]; then
    rm -f /etc/ld.so.conf.d/glusterfs.conf
    /sbin/ldconfig
fi

%if (0%{?_with_firewalld:1})
    %firewalld_reload
%endif

%endif

##-----------------------------------------------------------------------------
## All %%pre should be placed here and keep them sorted
##
%pre
getent group gluster > /dev/null || groupadd -r gluster
getent passwd gluster > /dev/null || useradd -r -g gluster -d %{_rundir}/gluster -s /sbin/nologin -c "GlusterFS daemons" gluster
exit 0

##-----------------------------------------------------------------------------
## All %%preun should be placed here and keep them sorted
##
%if ( 0%{!?_without_events:1} )
%preun events
if [ $1 -eq 0 ]; then
    if [ -f %glustereventsd_svcfile ]; then
        %service_stop glustereventsd
        %systemd_preun glustereventsd
    fi
fi
exit 0
%endif

%if ( 0%{!?_without_server:1} )
%preun server
if [ $1 -eq 0 ]; then
    if [ -f %glusterfsd_svcfile ]; then
        %service_stop glusterfsd
    fi
    %service_stop glusterd
    if [ -f %glusterfsd_svcfile ]; then
        %systemd_preun glusterfsd
    fi
    %systemd_preun glusterd
fi
if [ $1 -ge 1 ]; then
    if [ -f %glusterfsd_svcfile ]; then
        %systemd_postun_with_restart glusterfsd
    fi
    %systemd_postun_with_restart glusterd
fi
exit 0
%endif

##-----------------------------------------------------------------------------
## All %%postun should be placed here and keep them sorted
##
%postun
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
%systemd_postun_with_restart rsyslog
%endif
%endif

%if ( 0%{!?_without_server:1} )
%postun server
%if (0%{?_with_firewalld:1})
    %firewalld_reload
%endif
exit 0
%endif

%if ( 0%{!?_without_server:1} )
%if ( 0%{?fedora} && 0%{?fedora} > 25  || ( 0%{?rhel} && 0%{?rhel} > 6 ) )
%postun ganesha
semanage boolean -m ganesha_use_fusefs --off
exit 0
%endif
%endif

##-----------------------------------------------------------------------------
## All %%trigger should be placed here and keep them sorted
##
%if ( 0%{!?_without_server:1} )
%if ( 0%{?fedora} && 0%{?fedora} > 25  || ( 0%{?rhel} && 0%{?rhel} > 6 ) )
%trigger ganesha -- selinux-policy-targeted
semanage boolean -m ganesha_use_fusefs --on
exit 0
%endif
%endif

##-----------------------------------------------------------------------------
## All %%triggerun should be placed here and keep them sorted
##
%if ( 0%{!?_without_server:1} )
%if ( 0%{?fedora} && 0%{?fedora} > 25  || ( 0%{?rhel} && 0%{?rhel} > 6 ) )
%triggerun ganesha -- selinux-policy-targeted
semanage boolean -m ganesha_use_fusefs --off
exit 0
%endif
%endif

##-----------------------------------------------------------------------------
## All %%files should be placed here and keep them grouped
##
%files
%doc ChangeLog COPYING-GPLV2 COPYING-LGPLV3 INSTALL README.md THANKS COMMITMENT
%{_mandir}/man8/*gluster*.8*
%if ( 0%{!?_without_server:1} )
%exclude %{_mandir}/man8/gluster.8*
%endif
%dir %{_localstatedir}/log/glusterfs
%if ( 0%{!?_without_rdma:1} )
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/rdma*
%endif
%if 0%{?!_without_server:1}
%dir %{_datadir}/glusterfs
%dir %{_datadir}/glusterfs/scripts
     %{_datadir}/glusterfs/scripts/post-upgrade-script-for-quota.sh
     %{_datadir}/glusterfs/scripts/pre-upgrade-script-for-quota.sh
%endif
# xlators that are needed on the client- and on the server-side
%dir %{_libdir}/glusterfs
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/auth
     %{_libdir}/glusterfs/%{version}%{?prereltag}/auth/addr.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/auth/login.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport
     %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/socket.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/error-gen.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/delay-gen.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/io-stats.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/sink.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/trace.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/access-control.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/barrier.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/cdc.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/changelog.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/utime.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/gfid-access.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/namespace.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/read-only.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/shard.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/snapview-client.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/worm.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/cloudsync.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/meta.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/io-cache.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/io-threads.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/md-cache.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/open-behind.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/quick-read.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/read-ahead.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/readdir-ahead.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/stat-prefetch.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/write-behind.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/nl-cache.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/system
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/system/posix-acl.so
%dir %attr(0775,gluster,gluster) %{_rundir}/gluster
%if 0%{?_tmpfilesdir:1} && 0%{!?_without_server:1}
%{_tmpfilesdir}/gluster.conf
%endif
%if ( 0%{?_without_extra_xlators:1} )
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/quiesce.so
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/playground/template.so
%endif
%if ( 0%{?_without_regression_tests:1} )
%exclude %{_datadir}/glusterfs/run-tests.sh
%exclude %{_datadir}/glusterfs/tests
%endif
%if 0%{?_without_server:1}
%if ( 0%{?_with_systemd:1} )
%exclude %{_datadir}/glusterfs/scripts/control-cpu-load.sh
%exclude %{_datadir}/glusterfs/scripts/control-mem.sh
%endif
%endif

%if ( 0%{?_without_server:1} )
#exclude ganesha related files
%exclude %{_sysconfdir}/ganesha/ganesha-ha.conf.sample
%exclude %{_libexecdir}/ganesha/*
%exclude %{_prefix}/lib/ocf/resource.d/heartbeat/*
%endif

%exclude %{_datadir}/glusterfs/scripts/setup-thin-arbiter.sh

%if ( 0%{?_without_server:1} )
%exclude %{_sysconfdir}/glusterfs/thin-arbiter.vol
%endif

%files api
%exclude %{_libdir}/*.so
# libgfapi files
%{_libdir}/libgfapi.*
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/api.so

%files api-devel
%{_libdir}/pkgconfig/glusterfs-api.pc
%{_libdir}/libgfapi.so
%dir %{_includedir}/glusterfs
%dir %{_includedir}/glusterfs/api
     %{_includedir}/glusterfs/api/*

%files cli
%{_sbindir}/gluster
%{_mandir}/man8/gluster.8*
%{_sysconfdir}/bash_completion.d/gluster

%files cloudsync-plugins
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/cloudsync-plugins
     %{_libdir}/glusterfs/%{version}%{?prereltag}/cloudsync-plugins/cloudsyncs3.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/cloudsync-plugins/cloudsynccvlt.so

%files devel
%dir %{_includedir}/glusterfs
     %{_includedir}/glusterfs/*
%exclude %{_includedir}/glusterfs/api
%exclude %{_libdir}/libgfapi.so
%{_libdir}/*.so
%if ( 0%{?_without_server:1} )
%exclude %{_libdir}/pkgconfig/libgfchangelog.pc
%exclude %{_libdir}/libgfchangelog.so
%if ( 0%{!?_without_tiering:1} )
%exclude %{_libdir}/pkgconfig/libgfdb.pc
%endif
%else
%{_libdir}/pkgconfig/libgfchangelog.pc
%if ( 0%{!?_without_tiering:1} )
%{_libdir}/pkgconfig/libgfdb.pc
%endif
%endif

%files client-xlators
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/cluster
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/cluster/*.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol/client.so

%if ( 0%{!?_without_extra_xlators:1} )
%files extra-xlators
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/quiesce.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/playground
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/playground/template.so
%endif

%files fuse
# glusterfs is a symlink to glusterfsd, -server depends on -fuse.
%{_sbindir}/glusterfs
%{_sbindir}/glusterfsd
%config(noreplace) %{_sysconfdir}/logrotate.d/glusterfs
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/fuse.so
/sbin/mount.glusterfs
%if ( 0%{!?_without_fusermount:1} )
%{_bindir}/fusermount-glusterfs
%endif

%if ( 0%{!?_without_georeplication:1} )
%files geo-replication
%config(noreplace) %{_sysconfdir}/logrotate.d/glusterfs-georep

%{_sbindir}/gfind_missing_files
%{_sbindir}/gluster-mountbroker
%dir %{_libexecdir}/glusterfs
%dir %{_libexecdir}/glusterfs/python
%dir %{_libexecdir}/glusterfs/python/syncdaemon
     %{_libexecdir}/glusterfs/gsyncd
     %{_libexecdir}/glusterfs/python/syncdaemon/*
     %{_libexecdir}/glusterfs/gverify.sh
     %{_libexecdir}/glusterfs/set_geo_rep_pem_keys.sh
     %{_libexecdir}/glusterfs/peer_gsec_create
     %{_libexecdir}/glusterfs/peer_mountbroker
     %{_libexecdir}/glusterfs/peer_mountbroker.py*
     %{_libexecdir}/glusterfs/gfind_missing_files
     %{_libexecdir}/glusterfs/peer_georep-sshkey.py*
%{_sbindir}/gluster-georep-sshkey

       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/geo-replication
%ghost      %attr(0644,-,-) %{_sharedstatedir}/glusterd/geo-replication/gsyncd_template.conf
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create/post/S56glusterd-geo-rep-create-post.sh
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create/pre

%dir %{_datadir}/glusterfs
%dir %{_datadir}/glusterfs/scripts
     %{_datadir}/glusterfs/scripts/get-gfid.sh
     %{_datadir}/glusterfs/scripts/slave-upgrade.sh
     %{_datadir}/glusterfs/scripts/gsync-upgrade.sh
     %{_datadir}/glusterfs/scripts/generate-gfid-file.sh
     %{_datadir}/glusterfs/scripts/gsync-sync-gfid
     %{_datadir}/glusterfs/scripts/schedule_georep.py*
%endif

%files libs
%{_libdir}/*.so.*
%exclude %{_libdir}/libgfapi.*
%if ( 0%{!?_without_tiering:1} )
# libgfdb is only needed server-side
%exclude %{_libdir}/libgfdb.*
%endif

%files -n python%{_pythonver}-gluster
# introducing glusterfs module in site packages.
# so that all other gluster submodules can reside in the same namespace.
%if ( %{_usepython3} )
%dir %{python3_sitelib}/gluster
     %{python3_sitelib}/gluster/__init__.*
     %{python3_sitelib}/gluster/__pycache__
     %{python3_sitelib}/gluster/cliutils
%else
%dir %{python2_sitelib}/gluster
     %{python2_sitelib}/gluster/__init__.*
     %{python2_sitelib}/gluster/cliutils
%endif

%if ( 0%{!?_without_rdma:1} )
%files rdma
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport
     %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/rdma*
%endif

%if ( 0%{!?_without_regression_tests:1} )
%files regression-tests
%dir %{_datadir}/glusterfs
     %{_datadir}/glusterfs/run-tests.sh
     %{_datadir}/glusterfs/tests
%exclude %{_datadir}/glusterfs/tests/vagrant
%endif

%if ( 0%{!?_without_server:1} )
%files ganesha
%dir %{_libexecdir}/ganesha
%{_sysconfdir}/ganesha/ganesha-ha.conf.sample
%{_libexecdir}/ganesha/*
%{_prefix}/lib/ocf/resource.d/heartbeat/*
%{_sharedstatedir}/glusterd/hooks/1/start/post/S31ganesha-start.sh
%ghost      %attr(0644,-,-) %config(noreplace) %{_sysconfdir}/ganesha/ganesha-ha.conf
%ghost %dir %attr(0755,-,-) %{_localstatedir}/run/gluster/shared_storage/nfs-ganesha
%ghost      %attr(0644,-,-) %config(noreplace) %{_localstatedir}/run/gluster/shared_storage/nfs-ganesha/ganesha.conf
%ghost      %attr(0644,-,-) %config(noreplace) %{_localstatedir}/run/gluster/shared_storage/nfs-ganesha/ganesha-ha.conf
%endif

%if ( 0%{!?_without_ocf:1} )
%files resource-agents
# /usr/lib is the standard for OCF, also on x86_64
%{_prefix}/lib/ocf/resource.d/glusterfs
%endif

%if ( 0%{!?_without_server:1} )
%files server
%doc extras/clear_xattrs.sh
# sysconf
%config(noreplace) %{_sysconfdir}/glusterfs
%exclude %{_sysconfdir}/glusterfs/thin-arbiter.vol
%exclude %{_sysconfdir}/glusterfs/eventsconfig.json
%config(noreplace) %{_sysconfdir}/sysconfig/glusterd
%if ( 0%{_for_fedora_koji_builds} )
%config(noreplace) %{_sysconfdir}/sysconfig/glusterfsd
%endif

# init files
%glusterd_svcfile
%if ( 0%{_for_fedora_koji_builds} )
%glusterfsd_svcfile
%endif
%if ( 0%{?_with_systemd:1} )
%glusterfssharedstorage_svcfile
%endif

# binaries
%{_sbindir}/glusterd
%{_sbindir}/glfsheal
%{_sbindir}/gf_attach
%{_sbindir}/gluster-setgfid2path
# {_sbindir}/glusterfsd is the actual binary, but glusterfs (client) is a
# symlink. The binary itself (and symlink) are part of the glusterfs-fuse
# package, because glusterfs-server depends on that anyway.

# Manpages
%{_mandir}/man8/gluster-setgfid2path.8*

# xlators
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/arbiter.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/bit-rot.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/bitrot-stub.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/sdfs.so
%if ( 0%{!?_without_tiering:1} )
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/changetimerecorder.so
     %{_libdir}/libgfdb.so.*
%endif
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/index.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/locks.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/posix*
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/snapview-server.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/marker.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/quota*
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/selinux.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/trash.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/upcall.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/leases.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/nfs*
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mgmt
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mgmt/glusterd.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol/server.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/storage
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/storage/posix.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/decompounder.so

# snap_scheduler
%{_sbindir}/snap_scheduler.py
%{_sbindir}/gcron.py
%{_sbindir}/conf.py

# /var/lib/glusterd, e.g. hookscripts, etc.
%ghost      %attr(0644,-,-) %config(noreplace) %{_sharedstatedir}/glusterd/glusterd.info
%ghost      %attr(0600,-,-) %config(noreplace) %{_sharedstatedir}/glusterd/options
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/bitd
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/groups
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/virt
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/metadata-cache
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/gluster-block
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/nl-cache
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/db-workload
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/distributed-virt
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/samba
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/glusterfind
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/glusterfind/.keys
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/glustershd
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/post/disabled-quota-root-xattr-heal.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/post/S13create-subdir-mounts.sh
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/pre
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/pre/S28Quota-enable-root-xattr-heal.sh
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/create
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/create/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/create/pre
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/copy-file
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/copy-file/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/copy-file/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/delete
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/delete/post
                            %{_sharedstatedir}/glusterd/hooks/1/delete/post/S57glusterfind-delete-post
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/delete/pre
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/remove-brick
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/remove-brick/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/remove-brick/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/reset
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/reset/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/reset/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/post/S30samba-set.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/post/S32gluster_enable_shared_storage.sh
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/post/S29CTDBsetup.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/post/S30samba-start.sh
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/post
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/pre
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/pre/S30samba-stop.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/pre/S29CTDB-teardown.sh
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/nfs
%ghost      %attr(0600,-,-) %{_sharedstatedir}/glusterd/nfs/nfs-server.vol
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/nfs/run
%ghost      %attr(0600,-,-) %{_sharedstatedir}/glusterd/nfs/run/nfs.pid
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/peers
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/quotad
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/scrub
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/snaps
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/ss_brick
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/vols

# Extra utility script
%dir %{_libexecdir}/glusterfs
     %{_datadir}/glusterfs/release
%dir %{_datadir}/glusterfs/scripts
     %{_datadir}/glusterfs/scripts/stop-all-gluster-processes.sh
%if ( 0%{?_with_systemd:1} )
     %{_libexecdir}/glusterfs/mount-shared-storage.sh
     %{_datadir}/glusterfs/scripts/control-cpu-load.sh
     %{_datadir}/glusterfs/scripts/control-mem.sh
%endif

# Incrementalapi
     %{_libexecdir}/glusterfs/glusterfind
%{_bindir}/glusterfind
     %{_libexecdir}/glusterfs/peer_add_secret_pub

%if ( 0%{?_with_firewalld:1} )
%{_prefix}/lib/firewalld/services/glusterfs.xml
%endif
# end of server files
%endif

# Events
%if ( 0%{!?_without_events:1} )
%files events
%config(noreplace) %{_sysconfdir}/glusterfs/eventsconfig.json
%dir %{_sharedstatedir}/glusterd
%dir %{_sharedstatedir}/glusterd/events
%dir %{_libexecdir}/glusterfs
     %{_libexecdir}/glusterfs/gfevents
     %{_libexecdir}/glusterfs/peer_eventsapi.py*
%{_sbindir}/glustereventsd
%{_sbindir}/gluster-eventsapi
%{_datadir}/glusterfs/scripts/eventsdash.py*
%if ( 0%{?_with_systemd:1} )
%{_unitdir}/glustereventsd.service
%else
%{_sysconfdir}/init.d/glustereventsd
%endif
%endif

##-----------------------------------------------------------------------------
## All %pretrans should be placed here and keep them sorted
##
%if 0%{!?_without_server:1}
%pretrans -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          echo "ERROR: Distribute volumes detected. In-service rolling upgrade requires distribute volume(s) to be stopped."
          echo "ERROR: Please stop distribute volume(s) before proceeding... exiting!"
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   echo "WARNING: Updating glusterfs requires its processes to be killed. This action does NOT incur downtime."
   echo "WARNING: Ensure to wait for the upgraded server to finish healing before proceeding."
   echo "WARNING: Refer upgrade section of install guide for more details"
   echo "Please run # service glusterd stop; pkill glusterfs; pkill glusterfsd; pkill gsyncd.py;"
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%pretrans api -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%pretrans api-devel -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%pretrans cli -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end


%pretrans client-xlators -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end


%pretrans fuse -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%if ( 0%{!?_without_georeplication:1} )
%pretrans geo-replication -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end
%endif



%pretrans libs -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%if ( 0%{!?_without_rdma:1} )
%pretrans rdma -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end
%endif



%if ( 0%{!?_without_ocf:1} )
%pretrans resource-agents -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end
%endif



%pretrans server -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end

%posttrans server
pidof -c -o %PPID -x glusterd &> /dev/null
if [ $? -eq 0 ]; then
    kill -9 `pgrep -f gsyncd.py` &> /dev/null

    killall --wait -SIGTERM glusterd &> /dev/null

    if [ "$?" != "0" ]; then
        echo "killall failed while killing glusterd"
    fi

    glusterd --xlator-option *.upgrade=on -N

    #Cleaning leftover glusterd socket file which is created by glusterd in
    #rpm_script_t context.
    rm -rf /var/run/glusterd.socket

    # glusterd _was_ running, we killed it, it exited after *.upgrade=on,
    # so start it again
    %service_start glusterd
else
    glusterd --xlator-option *.upgrade=on -N

    #Cleaning leftover glusterd socket file which is created by glusterd in
    #rpm_script_t context.
    rm -rf /var/run/glusterd.socket
fi

%endif

%changelog
* Fri Jun 14 2019 Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-6
- fixes bugs bz#1668001 bz#1708043 bz#1708183 bz#1710701 
  bz#1719640 bz#1720079 bz#1720248 bz#1720318 bz#1720461

* Tue Jun 11 2019 Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-5
- fixes bugs bz#1573077 bz#1694595 bz#1703434 bz#1714536 bz#1714588 
  bz#1715407 bz#1715438 bz#1705018

* Fri Jun 07 2019 Rinku Kothiya <rkothiya@redhat.com> - 6.0-4
- fixes bugs bz#1480907 bz#1702298 bz#1703455 bz#1704181 bz#1707246
  bz#1708067 bz#1708116 bz#1708121 bz#1709087 bz#1711249 bz#1711296 
  bz#1714078 bz#1714124 bz#1716385 bz#1716626 bz#1716821 bz#1716865 bz#1717927

* Tue May 14 2019 Rinku Kothiya <rkothiya@redhat.com> - 6.0-3
- fixes bugs bz#1583585 bz#1671862 bz#1702686 bz#1703434 bz#1703753 
  bz#1703897 bz#1704562 bz#1704769 bz#1704851 bz#1706683 bz#1706776 bz#1706893

* Thu Apr 25 2019 Milind Changire <mchangir@redhat.com> - 6.0-2
- fixes bugs bz#1471742 bz#1652461 bz#1671862 bz#1676495 bz#1691620 
  bz#1696334 bz#1696903 bz#1697820 bz#1698436 bz#1698728 bz#1699709 bz#1699835 
  bz#1702240

* Mon Apr 08 2019 Milind Changire <mchangir@redhat.com> - 6.0-1
- rebase to upstream glusterfs at v6.0
- fixes bugs bz#1493284 bz#1578703 bz#1600918 bz#1670415 bz#1691620 
  bz#1693935 bz#1695057