From 3e5e311d23ac0a5bd5930ddb4094f7555b886329 Mon Sep 17 00:00:00 2001
From: Kamil Dudka <kdudka@redhat.com>
Date: Sat, 19 Dec 2015 22:56:40 +0100
Subject: [PATCH 1/2] Revert "Don't include dblocation.texi from original spot,
symlink it."
This reverts commit f59d88e456553dfe0b5185caf75e4041285fd595.
---
configure.ac | 2 +-
doc/Makefile.am | 8 +-------
doc/find.texi | 2 +-
3 files changed, 3 insertions(+), 9 deletions(-)
diff --git a/configure.ac b/configure.ac
index 7962719..ce0e768 100644
--- a/configure.ac
+++ b/configure.ac
@@ -70,7 +70,7 @@ AC_PROG_CPP
dnl for gnulib
gl_EARLY
-AC_PROG_LN_S
+
AC_PROG_INSTALL
AC_CHECK_TOOLS([AR], [ar])
AC_CHECK_TOOLS([RANLIB], [ranlib], [:])
diff --git a/doc/Makefile.am b/doc/Makefile.am
index f6f7443..6fbf57b 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -16,11 +16,9 @@ AM_CFLAGS = $(WARN_CFLAGS)
info_TEXINFOS = find.texi find-maint.texi
find_TEXINFOS = perm.texi parse-datetime.texi regexprops.texi fdl.texi
-BUILT_SOURCES = dblocation.texi
-nodist_find_TEXINFOS = dblocation.texi
find_maint_TEXINFOS = fdl.texi
MOSTLYCLEANFILES = find.cps
-CLEANFILES = find.txt find_mono.html findutils.texi_html_node.tar.gz dblocation.texi
+CLEANFILES = find.txt find_mono.html findutils.texi_html_node.tar.gz
MAKEINFOTXT = $(MAKEINFO) --plaintext
@@ -69,7 +67,3 @@ find_mono.html: find.texi
# for "make all" or "make install" (or even "make check").
findutils.texi_html_node.tar.gz: find.html
tar zcf $@ $<
-
-
-dblocation.texi: ../locate/dblocation.texi
- $(LN_S) ../locate/dblocation.texi $@
diff --git a/doc/find.texi b/doc/find.texi
index a83a645..c2714dd 100644
--- a/doc/find.texi
+++ b/doc/find.texi
@@ -7,7 +7,7 @@
@c %**end of header
@include version.texi
-@include dblocation.texi
+@include ../locate/dblocation.texi
@iftex
@finalout
--
2.5.0
From d5473caa86f689ebcadacc593f5a71781c99e829 Mon Sep 17 00:00:00 2001
From: Kamil Dudka <kdudka@redhat.com>
Date: Wed, 11 May 2011 16:46:13 +0200
Subject: [PATCH 2/2] findutils-4.4.0-no-locate.patch
---
Makefile.am | 2 +-
configure.ac | 2 --
doc/find.texi | 24 ++++++++----------------
3 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/Makefile.am b/Makefile.am
index af82d54..6ad453b 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -9,7 +9,7 @@ DISTCLEANFILES = tool-versions.txt
# "tests" is the gnulib unit test dir.
-SUBDIRS = gl tests build-aux lib find xargs locate doc po m4
+SUBDIRS = gl tests build-aux lib find xargs doc po m4
ACLOCAL_AMFLAGS = -I gl/m4 -I m4
diff --git a/configure.ac b/configure.ac
index ce0e768..521e665 100644
--- a/configure.ac
+++ b/configure.ac
@@ -248,8 +248,6 @@ find/testsuite/Makefile
gl/Makefile
gl/lib/Makefile
lib/Makefile
-locate/Makefile
-locate/testsuite/Makefile
m4/Makefile
po/Makefile.in
po/Makefile
diff --git a/doc/find.texi b/doc/find.texi
index c2714dd..01367a4 100644
--- a/doc/find.texi
+++ b/doc/find.texi
@@ -7,7 +7,6 @@
@c %**end of header
@include version.texi
-@include ../locate/dblocation.texi
@iftex
@finalout
@@ -571,8 +570,7 @@ the databases are updated, and the directories for which they contain
entries.
Here is how to select which file name databases @code{locate}
-searches. The default is system-dependent. At the time this document
-was generated, the default was @file{@value{LOCATE_DB}}.
+searches. The default is system-dependent.
@table @code
@item --database=@var{path}
@@ -2892,13 +2890,9 @@ thrashing the network.
directories are indexed by each database file.
The default location for the locate database depends on how findutils
-is built, but the findutils installation accompanying this manual uses
-the default location @file{@value{LOCATE_DB}}.
-
-If no database exists at @file{@value{LOCATE_DB}} but the user did not
-specify where to look (by using @samp{-d} or setting
-@code{LOCATE_PATH}), then @code{locate} will also check for a
-``secure'' database in @file{/var/lib/slocate/slocate.db}.
+is built. If user did not specify where to look (by using @samp{-d}
+or setting @code{LOCATE_PATH}), then @code{locate} will also check for
+a ``secure'' database in @file{/var/lib/slocate/slocate.db}.
@node Database Formats
@section Database Formats
@@ -3438,8 +3432,7 @@ present.
@item --database=@var{path}
@itemx -d @var{path}
-Instead of searching the default @code{locate} database
-@file{@value{LOCATE_DB}}, @code{locate} searches the file
+@code{locate} searches the file
name databases in @var{path}, which is a colon-separated list of
database file names. You can also use the environment variable
@code{LOCATE_PATH} to set the list of database files to search. The
@@ -3614,8 +3607,7 @@ The environment variable @code{PRUNEFS} also sets this value. Default
is @file{nfs NFS proc}.
@item --output=@var{dbfile}
-The database file to build. The default is system-dependent, but
-when this document was formatted it was @file{@value{LOCATE_DB}}.
+The database file to build.
@item --localuser=@var{user}
The user to search the non-network directories as, using @code{su}.
@@ -5635,7 +5627,7 @@ why @code{xargs} is confused by your operating system).
@section Error Messages From @code{locate}
@table @samp
-@item warning: database @file{@value{LOCATE_DB}} is more than 8 days old
+@item warning: database @file{LOCATE_DB} is more than 8 days old
The @code{locate} program relies on a database which is periodically
built by the @code{updatedb} program. That hasn't happened in a long
time. To fix this problem, run @code{updatedb} manually. This can
@@ -5643,7 +5635,7 @@ often happen on systems that are generally not left on, so the
periodic ``cron'' task which normally does this doesn't get a chance
to run.
-@item locate database @file{@value{LOCATE_DB}} is corrupt or invalid
+@item locate database @file{LOCATE_DB} is corrupt or invalid
This should not happen. Re-run @code{updatedb}. If that works, but
@code{locate} still produces this error, run @code{locate --version}
and @code{updatedb --version}. These should produce the same output.
--
2.5.0