Blob Blame History Raw
From e25c3dbb6f91ed999399c981f00ab1dd1b30d6f1 Mon Sep 17 00:00:00 2001
From: Harald Hoyer <harald@redhat.com>
Date: Wed, 12 Aug 2015 14:33:49 +0200
Subject: [PATCH] iscsi: integrate with systemd and improve robustness

parse-cmdline sets up an initial initiator-name to let iscsid start.

iscsid is started before doing any iscsistart business.

iscsistart is done with systemd-run asynchrone to do things in
paralllel. Also restarted for every new interface which shows up.

If rd.iscsi.waitnet (default) is set, iscsistart is done only
after all interfaces are up.

If not all interfaces are up and rd.iscsi.testroute (default) is set,
the route to a iscsi target IP is checked and skipped, if there is none.

If all things fail, we issue a "dummy" interface iscsiroot to retry
everything in the initqueue/timeout.

(cherry picked from commit d94050ddaea8343d8adb8f151c8f4cad591d29d9)
---
 modules.d/95iscsi/cleanup-iscsi.sh   |   2 +-
 modules.d/95iscsi/iscsiroot.sh       | 116 ++++++++++++++++++++++++-----------
 modules.d/95iscsi/module-setup.sh    |  31 ++++++++++
 modules.d/95iscsi/parse-iscsiroot.sh |  27 ++++++--
 4 files changed, 134 insertions(+), 42 deletions(-)

diff --git a/modules.d/95iscsi/cleanup-iscsi.sh b/modules.d/95iscsi/cleanup-iscsi.sh
index a2d5951f..88a63e00 100755
--- a/modules.d/95iscsi/cleanup-iscsi.sh
+++ b/modules.d/95iscsi/cleanup-iscsi.sh
@@ -2,5 +2,5 @@
 # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 
-[ -e /sys/module/bnx2i ] && killproc iscsiuio
+[ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && killproc iscsiuio
 
diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
index 1de6fb75..68da9dd0 100755
--- a/modules.d/95iscsi/iscsiroot.sh
+++ b/modules.d/95iscsi/iscsiroot.sh
@@ -38,7 +38,7 @@ iroot=${iroot#:}
 # figured out a way how to check whether this is built-in or not
 modprobe crc32c 2>/dev/null
 
-if [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then
+if [ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then
         iscsiuio
         > /tmp/iscsiuio-started
 fi
@@ -107,28 +107,47 @@ handle_netroot()
 
     parse_iscsi_root "$1" || return 1
 
+    # Bail out early, if there is no route to the destination
+    if is_ip "$iscsi_target_ip" && [ "$netif" != "dummy" ] && ! all_ifaces_up && getargbool 1 rd.iscsi.testroute; then
+        ip route get "$iscsi_target_ip" >/dev/null 2>&1 || return 0
+    fi
+
 # XXX is this needed?
     getarg ro && iscsirw=ro
     getarg rw && iscsirw=rw
     fsopts=${fsopts:+$fsopts,}${iscsirw}
 
+    if [ -z $iscsi_initiator ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
+           iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
+           echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
+           rm -f /etc/iscsi/initiatorname.iscsi
+           mkdir -p /etc/iscsi
+           ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+           systemctl restart iscsid
+           sleep 1
+           > /tmp/iscsi_set_initiator
+    fi
+
     if [ -z $iscsi_initiator ]; then
-    # XXX Where are these from?
+        [ -f /run/initiatorname.iscsi ] && . /run/initiatorname.iscsi
         [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
         [ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
         iscsi_initiator=$InitiatorName
-
-    # XXX rfc3720 says 'SCSI Initiator Name: The iSCSI Initiator Name specifies
-    # the worldwide unique name of the initiator.' Could we use hostname/ip
-    # if missing?
     fi
 
     if [ -z $iscsi_initiator ]; then
-       if [ -f /sys/firmware/ibft/initiator/initiator-name ]; then
-           iscsi_initiator=$(while read line; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
-       fi
+        iscsi_initiator=$(iscsi-iname)
+        echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
+        rm -f /etc/iscsi/initiatorname.iscsi
+        mkdir -p /etc/iscsi
+        ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+        systemctl restart iscsid
+        > /tmp/iscsi_set_initiator
+        # FIXME: iscsid is not yet ready, when the service is :-/
+        sleep 1
     fi
 
+
     if [ -z $iscsi_target_port ]; then
         iscsi_target_port=3260
     fi
@@ -137,23 +156,21 @@ handle_netroot()
         iscsi_target_group=1
     fi
 
-    if [ -z $iscsi_initiator ]; then
-    # XXX is this correct?
-        iscsi_initiator=$(iscsi-iname)
-    fi
-
     if [ -z $iscsi_lun ]; then
         iscsi_lun=0
     fi
 
-    echo "InitiatorName='$iscsi_initiator'" > /run/initiatorname.iscsi
+    echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
     ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
-
+    if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
+        mkdir -p /etc/iscsi
+        ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+    fi
 # FIXME $iscsi_protocol??
 
-    if [ "$root" = "dhcp" ]; then
+    if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ]; then
         # if root is not specified try to mount the whole iSCSI LUN
-        printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' $iscsi_lun >> /etc/udev/rules.d/99-iscsi-root.rules
+        printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' "$iscsi_lun" >> /etc/udev/rules.d/99-iscsi-root.rules
         udevadm control --reload
         write_fs_tab /dev/root
         wait_for_dev -n /dev/root
@@ -163,29 +180,58 @@ handle_netroot()
             echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > $hookdir/mount/01-$$-iscsi.sh
     fi
 
-    # force udevsettle to break
-    > $hookdir/initqueue/work
-
-    iscsistart -i $iscsi_initiator -t $iscsi_target_name        \
-        -g $iscsi_target_group -a $iscsi_target_ip      \
-        -p $iscsi_target_port \
-        ${iscsi_username:+-u $iscsi_username} \
-        ${iscsi_password:+-w $iscsi_password} \
-        ${iscsi_in_username:+-U $iscsi_in_username} \
-        ${iscsi_in_password:+-W $iscsi_in_password} \
-	${iscsi_iface_name:+--param iface.iscsi_ifacename=$iscsi_iface_name} \
-	${iscsi_netdev_name:+--param iface.net_ifacename=$iscsi_netdev_name} \
-        ${iscsi_param} \
-	|| :
-
+    if [ -n "$DRACUT_SYSTEMD" ] && command -v systemd-run >/dev/null 2>&1; then
+        netroot_enc=$(systemd-escape "iscsistart_${1}")
+        status=$(systemctl is-active "$netroot_enc" 2>/dev/null)
+        is_active=$?
+        if [ $is_active -ne 0 ]; then
+            if [ "$status" != "activating" ] && ! systemctl is-failed "$netroot_enc" >/dev/null 2>&1; then
+                systemd-run --no-block --service-type=oneshot --remain-after-exit --quiet \
+                            --description="Login iSCSI Target $iscsi_target_name" \
+                            --unit="$netroot_enc" -- \
+                            $(command -v iscsistart) \
+                            -i $iscsi_initiator -t $iscsi_target_name        \
+                            -g $iscsi_target_group -a $iscsi_target_ip      \
+                            -p $iscsi_target_port \
+                            ${iscsi_username:+-u $iscsi_username} \
+                            ${iscsi_password:+-w $iscsi_password} \
+                            ${iscsi_in_username:+-U $iscsi_in_username} \
+                            ${iscsi_in_password:+-W $iscsi_in_password} \
+	                    ${iscsi_iface_name:+--param iface.iscsi_ifacename=$iscsi_iface_name} \
+	                    ${iscsi_netdev_name:+--param iface.net_ifacename=$iscsi_netdev_name} \
+                            ${iscsi_param} >/dev/null 2>&1
+            else
+                systemctl --no-block restart "$netroot_enc" >/dev/null 2>&1
+            fi
+        fi
+    else
+        > $hookdir/initqueue/work
+        iscsistart -i $iscsi_initiator -t $iscsi_target_name        \
+                   -g $iscsi_target_group -a $iscsi_target_ip      \
+                   -p $iscsi_target_port \
+                   ${iscsi_username:+-u $iscsi_username} \
+                   ${iscsi_password:+-w $iscsi_password} \
+                   ${iscsi_in_username:+-U $iscsi_in_username} \
+                   ${iscsi_in_password:+-W $iscsi_in_password} \
+	           ${iscsi_iface_name:+--param iface.iscsi_ifacename=$iscsi_iface_name} \
+	           ${iscsi_netdev_name:+--param iface.net_ifacename=$iscsi_netdev_name} \
+                   ${iscsi_param} \
+	    || :
+    fi
     netroot_enc=$(str_replace "$1" '/' '\2f')
     echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}"
+    return 0
 }
 
 ret=0
 
+if [ "$netif" != "dummy" ] && getargbool 1 rd.iscsi.waitnet; then
+    all_ifaces_up || exit 0
+fi
+
 # loop over all netroot parameter
-if getarg netroot; then
+netroot=$(getarg netroot)
+if [ $? -eq 0 ] && [ "$netroot" != "dhcp" ]; then
     for nroot in $(getargs netroot); do
         [ "${nroot%%:*}" = "iscsi" ] || continue
         nroot="${nroot##iscsi:}"
@@ -212,6 +258,6 @@ fi
 
 need_shutdown
 
-# now we have a root filesystem somewhere in /dev/sda*
+# now we have a root filesystem somewhere in /dev/sd*
 # let the normal block handler handle root=
 exit $ret
diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh
index 49f9a0ed..d12eb7d8 100755
--- a/modules.d/95iscsi/module-setup.sh
+++ b/modules.d/95iscsi/module-setup.sh
@@ -83,6 +83,37 @@ install() {
     inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot"
     if ! dracut_module_included "systemd"; then
         inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh"
+    else
+        inst_multiple -o \
+                      $systemdsystemunitdir/iscsi.service \
+                      $systemdsystemunitdir/iscsid.service \
+                      $systemdsystemunitdir/iscsid.socket \
+                      $systemdsystemunitdir/iscsiuio.service \
+                      $systemdsystemunitdir/iscsiuio.socket \
+                      iscsiadm iscsid
+
+        mkdir -p "${initdir}/$systemdsystemunitdir/sockets.target.wants"
+        for i in \
+                iscsiuio.socket \
+            ; do
+            ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/sockets.target.wants/${i}"
+        done
+
+        mkdir -p "${initdir}/$systemdsystemunitdir/basic.target.wants"
+        for i in \
+                iscsid.service \
+            ; do
+            ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/basic.target.wants/${i}"
+        done
+
+        # Make sure iscsid is started after dracut-cmdline and ready for the initqueue
+        mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.service.d"
+        (
+            echo "[Unit]"
+            echo "After=dracut-cmdline.service"
+            echo "Before=dracut-initqueue.service"
+        ) > "${initdir}/$systemdsystemunitdir/iscsid.service.d/dracut.conf"
     fi
+
     dracut_need_initqueue
 }
diff --git a/modules.d/95iscsi/parse-iscsiroot.sh b/modules.d/95iscsi/parse-iscsiroot.sh
index b48be387..6a21b503 100755
--- a/modules.d/95iscsi/parse-iscsiroot.sh
+++ b/modules.d/95iscsi/parse-iscsiroot.sh
@@ -61,12 +61,13 @@ fi
 
 # iscsi_firmware does not need argument checking
 if [ -n "$iscsi_firmware" ] ; then
-    netroot=${netroot:-iscsi:}
-    modprobe -q iscsi_boot_sysfs 2>/dev/null
-    modprobe -q iscsi_ibft
-    initqueue --onetime --timeout /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'"
+    [ -z "$netroot" ] && netroot=iscsi:
+    modprobe -b -q iscsi_boot_sysfs 2>/dev/null
+    modprobe -b -q iscsi_ibft
 fi
 
+initqueue --onetime --timeout /sbin/iscsiroot dummy "$netroot" "$NEWROOT"
+
 # If it's not iscsi we don't continue
 [ "${netroot%%:*}" = "iscsi" ] || return
 
@@ -92,8 +93,22 @@ if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; the
     fi
 fi
 
-netroot_enc=$(str_replace "$netroot" '/' '\2f')
-echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+if arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) && [ -n "$arg" ]; then
+    iscsi_initiator=$arg
+    echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
+    ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
+    if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
+        mkdir -p /etc/iscsi
+        ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+    fi
+fi
+
+if [ -n "$iscsi_firmware" ] ; then
+    echo "[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+else
+    netroot_enc=$(str_replace "$netroot" '/' '\2f')
+    echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+fi
 
 # Done, all good!
 rootok=1