yeahuh / rpms / qemu-kvm

Forked from rpms/qemu-kvm 2 years ago
Clone
Blob Blame History Raw
From f3b05560b20866cadb604f0a5a6f4a7698d2e07b Mon Sep 17 00:00:00 2001
From: Alex Williamson <alex.williamson@redhat.com>
Date: Tue, 5 Nov 2013 15:37:35 +0100
Subject: [PATCH 14/25] vfio-pci: Lazy PCI option ROM loading

RH-Author: Alex Williamson <alex.williamson@redhat.com>
Message-id: <20131105153734.16057.77668.stgit@bling.home>
Patchwork-id: 55423
O-Subject: [RHEL7 qemu-kvm PATCH 2/5] vfio-pci: Lazy PCI option ROM loading
Bugzilla: 1026550
RH-Acked-by: Bandan Das <bsd@redhat.com>
RH-Acked-by: Paolo Bonzini <pbonzini@redhat.com>
RH-Acked-by: Laszlo Ersek <lersek@redhat.com>
RH-Acked-by: Michael S. Tsirkin <mst@redhat.com>

Bugzilla: 1026550
Upstream commit: 6f864e6ec8812d5a5525a7861ca599c6bcabdebe

During vfio-pci initfn, the device is not always in a state where the
option ROM can be read.  In the case of graphics cards, there's often
no per function reset, which means we have host driver state affecting
whether the option ROM is usable.  Ideally we want to move reading the
option ROM past any co-assigned device resets to the point where the
guest first tries to read the ROM itself.

To accomplish this, we switch the memory region for the option rom to
an I/O region rather than a memory mapped region.  This has the side
benefit that we don't waste KVM memory slots for a BAR where we don't
care about performance.  This also allows us to delay loading the ROM
from the device until the first read by the guest.  We then use the
PCI config space size of the ROM BAR when setting up the BAR through
QEMU PCI.

Another benefit of this approach is that previously when a user set
the ROM to a file using the romfile= option, we still probed VFIO for
the parameters of the ROM, which can result in dmesg errors about an
invalid ROM.  We now only probe VFIO to get the ROM contents if the
guest actually tries to read the ROM.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 hw/misc/vfio.c |  184 +++++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 122 insertions(+), 62 deletions(-)

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
---
 hw/misc/vfio.c |  184 +++++++++++++++++++++++++++++++++++++-------------------
 1 files changed, 122 insertions(+), 62 deletions(-)

diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
index 8e69182..8d84891 100644
--- a/hw/misc/vfio.c
+++ b/hw/misc/vfio.c
@@ -166,6 +166,7 @@ typedef struct VFIODevice {
     off_t config_offset; /* Offset of config space region within device fd */
     unsigned int rom_size;
     off_t rom_offset; /* Offset of ROM region within device fd */
+    void *rom;
     int msi_cap_size;
     VFIOMSIVector *msi_vectors;
     VFIOMSIXInfo *msix;
@@ -1058,6 +1059,125 @@ static const MemoryRegionOps vfio_bar_ops = {
     .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
+static void vfio_pci_load_rom(VFIODevice *vdev)
+{
+    struct vfio_region_info reg_info = {
+        .argsz = sizeof(reg_info),
+        .index = VFIO_PCI_ROM_REGION_INDEX
+    };
+    uint64_t size;
+    off_t off = 0;
+    size_t bytes;
+
+    if (ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, &reg_info)) {
+        error_report("vfio: Error getting ROM info: %m");
+        return;
+    }
+
+    DPRINTF("Device %04x:%02x:%02x.%x ROM:\n", vdev->host.domain,
+            vdev->host.bus, vdev->host.slot, vdev->host.function);
+    DPRINTF("  size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n",
+            (unsigned long)reg_info.size, (unsigned long)reg_info.offset,
+            (unsigned long)reg_info.flags);
+
+    vdev->rom_size = size = reg_info.size;
+    vdev->rom_offset = reg_info.offset;
+
+    if (!vdev->rom_size) {
+        return;
+    }
+
+    vdev->rom = g_malloc(size);
+    memset(vdev->rom, 0xff, size);
+
+    while (size) {
+        bytes = pread(vdev->fd, vdev->rom + off, size, vdev->rom_offset + off);
+        if (bytes == 0) {
+            break;
+        } else if (bytes > 0) {
+            off += bytes;
+            size -= bytes;
+        } else {
+            if (errno == EINTR || errno == EAGAIN) {
+                continue;
+            }
+            error_report("vfio: Error reading device ROM: %m");
+            break;
+        }
+    }
+}
+
+static uint64_t vfio_rom_read(void *opaque, hwaddr addr, unsigned size)
+{
+    VFIODevice *vdev = opaque;
+    uint64_t val = ((uint64_t)1 << (size * 8)) - 1;
+
+    /* Load the ROM lazily when the guest tries to read it */
+    if (unlikely(!vdev->rom)) {
+        vfio_pci_load_rom(vdev);
+    }
+
+    memcpy(&val, vdev->rom + addr,
+           (addr < vdev->rom_size) ? MIN(size, vdev->rom_size - addr) : 0);
+
+    DPRINTF("%s(%04x:%02x:%02x.%x, 0x%"HWADDR_PRIx", 0x%x) = 0x%"PRIx64"\n",
+            __func__, vdev->host.domain, vdev->host.bus, vdev->host.slot,
+            vdev->host.function, addr, size, val);
+
+    return val;
+}
+
+static const MemoryRegionOps vfio_rom_ops = {
+    .read = vfio_rom_read,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_pci_size_rom(VFIODevice *vdev)
+{
+    uint32_t orig, size = (uint32_t)PCI_ROM_ADDRESS_MASK;
+    off_t offset = vdev->config_offset + PCI_ROM_ADDRESS;
+    char name[32];
+
+    if (vdev->pdev.romfile || !vdev->pdev.rom_bar) {
+        return;
+    }
+
+    /*
+     * Use the same size ROM BAR as the physical device.  The contents
+     * will get filled in later when the guest tries to read it.
+     */
+    if (pread(vdev->fd, &orig, 4, offset) != 4 ||
+        pwrite(vdev->fd, &size, 4, offset) != 4 ||
+        pread(vdev->fd, &size, 4, offset) != 4 ||
+        pwrite(vdev->fd, &orig, 4, offset) != 4) {
+        error_report("%s(%04x:%02x:%02x.%x) failed: %m",
+                     __func__, vdev->host.domain, vdev->host.bus,
+                     vdev->host.slot, vdev->host.function);
+        return;
+    }
+
+    size = ~(size & PCI_ROM_ADDRESS_MASK) + 1;
+
+    if (!size) {
+        return;
+    }
+
+    DPRINTF("%04x:%02x:%02x.%x ROM size 0x%x\n", vdev->host.domain,
+            vdev->host.bus, vdev->host.slot, vdev->host.function, size);
+
+    snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom",
+             vdev->host.domain, vdev->host.bus, vdev->host.slot,
+             vdev->host.function);
+
+    memory_region_init_io(&vdev->pdev.rom,
+                          &vfio_rom_ops, vdev, name, size);
+
+    pci_register_bar(&vdev->pdev, PCI_ROM_SLOT,
+                     PCI_BASE_ADDRESS_SPACE_MEMORY, &vdev->pdev.rom);
+
+    vdev->pdev.has_rom = true;
+}
+
 static void vfio_vga_write(void *opaque, hwaddr addr,
                            uint64_t data, unsigned size)
 {
@@ -2633,51 +2753,6 @@ static int vfio_add_capabilities(VFIODevice *vdev)
     return vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]);
 }
 
-static int vfio_load_rom(VFIODevice *vdev)
-{
-    uint64_t size = vdev->rom_size;
-    char name[32];
-    off_t off = 0, voff = vdev->rom_offset;
-    ssize_t bytes;
-    void *ptr;
-
-    /* If loading ROM from file, pci handles it */
-    if (vdev->pdev.romfile || !vdev->pdev.rom_bar || !size) {
-        return 0;
-    }
-
-    DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain,
-            vdev->host.bus, vdev->host.slot, vdev->host.function);
-
-    snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom",
-             vdev->host.domain, vdev->host.bus, vdev->host.slot,
-             vdev->host.function);
-    memory_region_init_ram(&vdev->pdev.rom, name, size);
-    ptr = memory_region_get_ram_ptr(&vdev->pdev.rom);
-    memset(ptr, 0xff, size);
-
-    while (size) {
-        bytes = pread(vdev->fd, ptr + off, size, voff + off);
-        if (bytes == 0) {
-            break; /* expect that we could get back less than the ROM BAR */
-        } else if (bytes > 0) {
-            off += bytes;
-            size -= bytes;
-        } else {
-            if (errno == EINTR || errno == EAGAIN) {
-                continue;
-            }
-            error_report("vfio: Error reading device ROM: %m");
-            memory_region_destroy(&vdev->pdev.rom);
-            return -errno;
-        }
-    }
-
-    pci_register_bar(&vdev->pdev, PCI_ROM_SLOT, 0, &vdev->pdev.rom);
-    vdev->pdev.has_rom = true;
-    return 0;
-}
-
 static int vfio_connect_container(VFIOGroup *group)
 {
     VFIOContainer *container;
@@ -2911,22 +2986,6 @@ static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev)
         QLIST_INIT(&vdev->bars[i].quirks);
     }
 
-    reg_info.index = VFIO_PCI_ROM_REGION_INDEX;
-
-    ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, &reg_info);
-    if (ret) {
-        error_report("vfio: Error getting ROM info: %m");
-        goto error;
-    }
-
-    DPRINTF("Device %s ROM:\n", name);
-    DPRINTF("  size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n",
-            (unsigned long)reg_info.size, (unsigned long)reg_info.offset,
-            (unsigned long)reg_info.flags);
-
-    vdev->rom_size = reg_info.size;
-    vdev->rom_offset = reg_info.offset;
-
     reg_info.index = VFIO_PCI_CONFIG_REGION_INDEX;
 
     ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, &reg_info);
@@ -3224,7 +3283,7 @@ static int vfio_initfn(PCIDevice *pdev)
     memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24);
     memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4);
 
-    vfio_load_rom(vdev);
+    vfio_pci_size_rom(vdev);
 
     ret = vfio_early_setup_msix(vdev);
     if (ret) {
@@ -3289,6 +3348,7 @@ static void vfio_exitfn(PCIDevice *pdev)
     vfio_teardown_msi(vdev);
     vfio_unmap_bars(vdev);
     g_free(vdev->emulated_config_bits);
+    g_free(vdev->rom);
     vfio_put_device(vdev);
     vfio_put_group(group);
 }
-- 
1.7.1