# -*- rpm-spec -*-
# This spec file assumes you are building on a Fedora or RHEL version
# that's still supported by the vendor. It may work on other distros
# or versions, but no effort will be made to ensure that going forward.
%define min_rhel 8
%define min_fedora 37
%define arches_qemu_kvm %{ix86} x86_64 %{power64} %{arm} aarch64 s390x
%if 0%{?rhel}
%if 0%{?rhel} > 8
%define arches_qemu_kvm x86_64 aarch64 s390x
%else
%define arches_qemu_kvm x86_64 %{power64} aarch64 s390x
%endif
%endif
%define arches_64bit x86_64 %{power64} aarch64 s390x riscv64
%define arches_x86 %{ix86} x86_64
%define arches_systemtap_64bit %{arches_64bit}
%define arches_dmidecode %{arches_x86}
%define arches_xen %{arches_x86} aarch64
%if 0%{?fedora}
%define arches_xen x86_64 aarch64
%endif
%define arches_vbox %{arches_x86}
%define arches_ceph %{arches_64bit}
%define arches_zfs %{arches_x86} %{power64} %{arm}
%define arches_numactl %{arches_x86} %{power64} aarch64 s390x
%define arches_numad %{arches_x86} %{power64} aarch64
# The hypervisor drivers that run in libvirtd
%define with_qemu 0%{!?_without_qemu:1}
%define with_lxc 0%{!?_without_lxc:1}
%define with_libxl 0%{!?_without_libxl:1}
%define with_vbox 0%{!?_without_vbox:1}
%ifarch %{arches_qemu_kvm}
%define with_qemu_kvm %{with_qemu}
%else
%define with_qemu_kvm 0
%endif
%define with_qemu_tcg %{with_qemu}
# RHEL disables TCG on all architectures
%if 0%{?rhel}
%define with_qemu_tcg 0
%endif
%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}
%define with_qemu 0
%endif
# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
%define with_openvz 0%{!?_without_openvz:1}
%define with_vmware 0%{!?_without_vmware:1}
%define with_esx 0%{!?_without_esx:1}
%define with_hyperv 0%{!?_without_hyperv:1}
# Then the secondary host drivers, which run inside libvirtd
%define with_storage_rbd 0%{!?_without_storage_rbd:1}
%define with_storage_gluster 0%{!?_without_storage_gluster:1}
%if 0%{?rhel}
# Glusterfs has been dropped in RHEL-9, and before that
# was only enabled on arches where KVM exists
%if 0%{?rhel} > 8
%define with_storage_gluster 0
%else
%ifnarch %{arches_qemu_kvm}
%define with_storage_gluster 0
%endif
%endif
%endif
# Fedora has zfs-fuse
%if 0%{?fedora}
%define with_storage_zfs 0%{!?_without_storage_zfs:1}
%else
%define with_storage_zfs 0
%endif
%define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1}
# libiscsi has been dropped in RHEL-9
%if 0%{?rhel} > 8
%define with_storage_iscsi_direct 0
%endif
# Other optional features
%define with_numactl 0%{!?_without_numactl:1}
%define with_userfaultfd_sysctl 0%{!?_without_userfaultfd_sysctl:1}
# A few optional bits off by default, we enable later
%define with_fuse 0
%define with_sanlock 0
%define with_numad 0
%define with_nbdkit 0
%define with_nbdkit_config_default 0
%define with_firewalld_zone 0
%define with_netcf 0
%define with_libssh2 0
%define with_wireshark 0
%define with_libssh 0
%define with_dmidecode 0
# Finally set the OS / architecture specific special cases
# Architecture-dependent features
%ifnarch %{arches_xen}
%define with_libxl 0
%endif
%ifnarch %{arches_vbox}
%define with_vbox 0
%endif
%ifnarch %{arches_numactl}
%define with_numactl 0
%endif
%ifnarch %{arches_zfs}
%define with_storage_zfs 0
%endif
%ifnarch %{arches_ceph}
%define with_storage_rbd 0
%endif
# RHEL doesn't ship many hypervisor drivers
%if 0%{?rhel}
%define with_openvz 0
%define with_vbox 0
%define with_vmware 0
%define with_libxl 0
%define with_hyperv 0
%define with_lxc 0
%endif
%define with_firewalld_zone 0%{!?_without_firewalld_zone:1}
%if 0%{?rhel} && 0%{?rhel} < 9
%define with_netcf 0%{!?_without_netcf:1}
%endif
# fuse is used to provide virtualized /proc for LXC
%if %{with_lxc}
%define with_fuse 0%{!?_without_fuse:1}
%endif
# Enable sanlock library for lock management with QEMU
# Sanlock is available only on arches where kvm is available for RHEL
%if 0%{?fedora}
%define with_sanlock 0%{!?_without_sanlock:1}
%endif
%if 0%{?rhel}
%ifarch %{arches_qemu_kvm}
%define with_sanlock 0%{!?_without_sanlock:1}
%endif
%endif
# Enable libssh2 transport for new enough distros
%if 0%{?fedora}
%define with_libssh2 0%{!?_without_libssh2:1}
%endif
# Enable wireshark plugins for all distros
%define with_wireshark 0%{!?_without_wireshark:1}
%define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan
# Enable libssh transport for all distros
%define with_libssh 0%{!?_without_libssh:1}
%if %{with_qemu} || %{with_lxc}
# numad is used to manage the CPU and memory placement dynamically,
# it's not available on many non-x86 architectures.
%ifarch %{arches_numad}
%define with_numad 0%{!?_without_numad:1}
%endif
%endif
# We want to build with nbdkit support, but should only enable nbdkit by
# default if the OS ships a SELinux policy that allows libvirt to launch it.
# Right now that's not the case anywhere, but things should be fine by the time
# Fedora 40 is released.
%if %{with_qemu}
# rhel-8 lacks pidfd_open
%if 0%{?fedora} || 0%{?rhel} >= 9
%define with_nbdkit 0%{!?_without_nbdkit:1}
# setting 'with_nbdkit_config_default' must be done only when compiling
# in nbdkit support
#
# TODO: add RHEL 9 once a minor release that contains the necessary SELinux
# bits exists (we only support the most recent minor release)
%if 0%{?fedora} >= 40
%define with_nbdkit_config_default 0%{!?_without_nbdkit_config_default:1}
%endif
%endif
%endif
%ifarch %{arches_dmidecode}
%define with_dmidecode 0%{!?_without_dmidecode:1}
%endif
%define with_modular_daemons 0
%if 0%{?fedora} || 0%{?rhel} >= 9
%define with_modular_daemons 1
%endif
# Prefer nftables for future OS releases but keep using iptables
# for existing ones
%if 0%{?rhel} >= 10 || 0%{?fedora} >= 41
%define prefer_nftables 1
%define firewall_backend_priority nftables,iptables
%else
%define prefer_nftables 0
%define firewall_backend_priority iptables,nftables
%endif
# Force QEMU to run as non-root
%define qemu_user qemu
%define qemu_group qemu
# Locations for QEMU data
%define qemu_moddir %{_libdir}/qemu
%define qemu_datadir %{_datadir}/qemu
# Native / MinGW builds
%define with_native 0%{!?_without_native:1}
%define with_mingw32 0
%define with_mingw64 0
%if 0%{?fedora}
%if 0%{!?_without_mingw:1}
%define with_mingw32 0%{!?_without_mingw32:1}
%define with_mingw64 0%{!?_without_mingw64:1}
%endif
# These tell the other mingw macros whether to perform or
# skip the 32-bit and 64-bit specific steps respectively
%define mingw_build_win32 %{with_mingw32}
%define mingw_build_win64 %{with_mingw64}
%endif
%if !%{with_native}
# Building the debugsource package apparently only works if the
# native build is enabled. debuginfo packages don't have this
# problem and setting this doesn't disable them
%global debug_package %{nil}
%endif
# RHEL releases provide stable tool chains and so it is safe to turn
# compiler warning into errors without being worried about frequent
# changes in reported warnings
%if 0%{?rhel}
%define enable_werror -Dwerror=true
%else
%define enable_werror -Dwerror=false -Dgit_werror=disabled
%endif
# Fedora and RHEL-9 are new enough to support /dev/userfaultfd, which
# does not require enabling vm.unprivileged_userfaultfd sysctl.
%if 0%{?fedora} || 0%{?rhel} >= 9
%define with_userfaultfd_sysctl 0
%endif
%define tls_priority "@LIBVIRT,SYSTEM"
# libvirt 8.1.0 stops distributing any sysconfig files.
# If the user has customized their sysconfig file,
# the RPM upgrade path will rename it to .rpmsave
# because the file is no longer managed by RPM.
# To prevent a regression we rename it back after the
# transaction to preserve the user's modifications
%define libvirt_sysconfig_pre() \
for sc in %{?*} ; do \
test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \
mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}.rpmsave.old" ; \
done \
%{nil}
%define libvirt_sysconfig_posttrans() \
for sc in %{?*} ; do \
test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \
mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}" ; \
done \
%{nil}
Summary: Library providing a simple virtualization API
Name: libvirt
Version: 10.5.0
Release: 2%{?dist}
License: GPL-2.0-or-later AND LGPL-2.1-only AND LGPL-2.1-or-later AND OFL-1.1
URL: https://libvirt.org/
%if %(echo %{version} | grep "\.0$" >/dev/null; echo $?) == 1
%define mainturl stable_updates/
%endif
Source: https://download.libvirt.org/%{?mainturl}libvirt-%{version}.tar.xz
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-config-network = %{version}-%{release}
Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
%if %{with_libxl}
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
%endif
%if %{with_lxc}
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
%endif
%if %{with_qemu}
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
Requires: libvirt-client-qemu = %{version}-%{release}
%endif
# We had UML driver, but we've removed it.
Obsoletes: libvirt-daemon-driver-uml <= 5.0.0
Obsoletes: libvirt-daemon-uml <= 5.0.0
%if %{with_vbox}
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
%endif
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-client = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# All build-time requirements. Run-time requirements are
# listed against each sub-RPM
BuildRequires: python3-docutils
BuildRequires: meson >= 0.56.0
BuildRequires: ninja-build
BuildRequires: git
BuildRequires: perl-interpreter
BuildRequires: python3
BuildRequires: python3-pytest
# For xmllint
BuildRequires: libxml2
# For xsltproc
BuildRequires: libxslt
BuildRequires: gettext
BuildRequires: systemd-rpm-macros
# Fedora build root suckage
BuildRequires: gawk
%if %{with_native}
BuildRequires: gcc
%if %{with_libxl}
BuildRequires: xen-devel
%endif
BuildRequires: glib2-devel >= 2.58
BuildRequires: libxml2-devel
BuildRequires: readline-devel
BuildRequires: pkgconfig(bash-completion) >= 2.0
BuildRequires: libtasn1-devel
BuildRequires: gnutls-devel
BuildRequires: libattr-devel
# For pool-build probing for existing pools
BuildRequires: libblkid-devel >= 2.17
# for augparse, optionally used in testing
BuildRequires: augeas
BuildRequires: systemd-devel >= 185
BuildRequires: libpciaccess-devel >= 0.10.9
BuildRequires: yajl-devel
%if %{with_sanlock}
BuildRequires: sanlock-devel >= 2.4
%endif
BuildRequires: libpcap-devel >= 1.5.0
BuildRequires: libnl3-devel
BuildRequires: libselinux-devel
# For modprobe
BuildRequires: kmod
BuildRequires: cyrus-sasl-devel
BuildRequires: polkit >= 0.112
# For mount/umount in FS driver
BuildRequires: util-linux
%if %{with_qemu}
# For managing ACLs
BuildRequires: libacl-devel
# From QEMU RPMs, used by virstoragetest
BuildRequires: /usr/bin/qemu-img
%endif
# nbdkit support requires libnbd
%if %{with_nbdkit}
BuildRequires: libnbd-devel
%endif
# For LVM drivers
BuildRequires: lvm2
# For pool type=iscsi
BuildRequires: iscsi-initiator-utils
%if %{with_storage_iscsi_direct}
# For pool type=iscsi-direct
BuildRequires: libiscsi-devel
%endif
# For disk driver
BuildRequires: parted-devel
# For Multipath support
BuildRequires: device-mapper-devel
%if %{with_storage_rbd}
BuildRequires: librados-devel
BuildRequires: librbd-devel
%endif
%if %{with_storage_gluster}
BuildRequires: glusterfs-api-devel >= 3.4.1
BuildRequires: glusterfs-devel >= 3.4.1
%endif
%if %{with_numactl}
# For QEMU/LXC numa info
BuildRequires: numactl-devel
%endif
BuildRequires: libcap-ng-devel >= 0.5.0
%if %{with_fuse}
BuildRequires: fuse-devel >= 2.8.6
%endif
%if %{with_libssh2}
BuildRequires: libssh2-devel >= 1.3.0
%endif
%if %{with_netcf}
BuildRequires: netcf-devel >= 0.2.2
%endif
%if %{with_esx}
BuildRequires: libcurl-devel
%endif
%if %{with_hyperv}
BuildRequires: libwsman-devel >= 2.6.3
%endif
BuildRequires: audit-libs-devel
# we need /usr/sbin/dtrace
BuildRequires: systemtap-sdt-devel
# For mount/umount in FS driver
BuildRequires: util-linux
# For showmount in FS driver (netfs discovery)
BuildRequires: nfs-utils
%if %{with_numad}
BuildRequires: numad
%endif
%if %{with_wireshark}
BuildRequires: wireshark-devel
%endif
%if %{with_libssh}
BuildRequires: libssh-devel >= 0.8.1
%endif
BuildRequires: libtirpc-devel
%if %{with_firewalld_zone}
# Needed for the firewalld_reload macro
BuildRequires: firewalld-filesystem
%endif
%endif
%if %{with_mingw32}
BuildRequires: mingw32-filesystem
BuildRequires: mingw32-gcc
BuildRequires: mingw32-binutils
BuildRequires: mingw32-glib2 >= 2.48
BuildRequires: mingw32-gnutls
BuildRequires: mingw32-gettext
BuildRequires: mingw32-libxml2
BuildRequires: mingw32-portablexdr
BuildRequires: mingw32-dlfcn
BuildRequires: mingw32-libssh2
BuildRequires: mingw32-curl
%endif
%if %{with_mingw64}
BuildRequires: mingw64-filesystem
BuildRequires: mingw64-gcc
BuildRequires: mingw64-binutils
BuildRequires: mingw64-glib2 >= 2.48
BuildRequires: mingw64-gnutls
BuildRequires: mingw64-gettext
BuildRequires: mingw64-libxml2
BuildRequires: mingw64-portablexdr
BuildRequires: mingw64-dlfcn
BuildRequires: mingw64-libssh2
BuildRequires: mingw64-curl
%endif
%description
Libvirt is a C toolkit to interact with the virtualization capabilities
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.
%if %{with_native}
%package docs
Summary: API reference and website documentation
%description docs
Includes the API reference for the libvirt C library, and a complete
copy of the libvirt.org website documentation.
%package daemon
Summary: Server side daemon and supporting files for libvirt library
# All runtime requirements for the libvirt package (runtime requrements
# for subpackages are listed later in those subpackages)
# The client side, i.e. shared libs are in a subpackage
Requires: libvirt-libs = %{version}-%{release}
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-daemon-lock = %{version}-%{release}
Requires: libvirt-daemon-plugin-lockd = %{version}-%{release}
Requires: libvirt-daemon-log = %{version}-%{release}
Requires: libvirt-daemon-proxy = %{version}-%{release}
%description daemon
Server side daemon required to manage the virtualization capabilities
of recent versions of Linux. Requires a hypervisor specific sub-RPM
for specific drivers.
%package daemon-common
Summary: Files and utilities used by daemons
Requires: libvirt-libs = %{version}-%{release}
# The libvirt-guests.sh script requires virsh from libvirt-client subpackage,
# but not every deployment wants to use libvirt-guests service. Using
# Recommends here will install libvirt-client by default (if available), but
# RPM won't complain if the package is unavailable, masked, or removed later.
Recommends: libvirt-client = %{version}-%{release}
# for /sbin/ip
Requires: iproute
# for /sbin/tc
Requires: iproute-tc
Requires: polkit >= 0.112
%if %{with_dmidecode}
# For virConnectGetSysinfo
Requires: dmidecode
%endif
# For service management
Requires(posttrans): /usr/bin/systemctl
Requires(preun): /usr/bin/systemctl
# libvirtd depends on 'messagebus' service
Requires: dbus
# For uid creation during pre
Requires(pre): shadow-utils
# Needed by /usr/libexec/libvirt-guests.sh script.
%if 0%{?fedora}
Requires: gettext-runtime
%else
Requires: gettext
%endif
# Ensure smooth upgrades
Obsoletes: libvirt-admin < 7.3.0
Provides: libvirt-admin = %{version}-%{release}
Obsoletes: libvirt-bash-completion < 7.3.0
%description daemon-common
Miscellaneous files and utilities used by other libvirt daemons
%package daemon-lock
Summary: Server side daemon for managing locks
Requires: libvirt-libs = %{version}-%{release}
%description daemon-lock
Server side daemon used to manage locks held against virtual machine
resources
%package daemon-plugin-lockd
Summary: lockd client plugin for virtlockd
Requires: libvirt-libs = %{version}-%{release}
Requires: libvirt-daemon-lock = %{version}-%{release}
%description daemon-plugin-lockd
A client-side plugin that implements disk locking using POSIX fcntl advisory
locks via communication with the virtlockd daemon
%package daemon-log
Summary: Server side daemon for managing logs
Requires: libvirt-libs = %{version}-%{release}
%description daemon-log
Server side daemon used to manage logs from virtual machine consoles
%package daemon-proxy
Summary: Server side daemon providing libvirtd proxy
Requires: libvirt-libs = %{version}-%{release}
# netcat is needed on the server side so that clients that have
# libvirt < 6.9.0 can connect, but newer versions will prefer
# virt-ssh-helper. Making this a Recommends means that it gets
# installed by default, but can still be removed if compatibility
# with old clients is not required
Recommends: /usr/bin/nc
%description daemon-proxy
Server side daemon providing functionality previously provided by
the monolithic libvirtd
%package daemon-config-network
Summary: Default configuration files for the libvirtd daemon
Requires: libvirt-daemon-driver-network = %{version}-%{release}
%description daemon-config-network
Default configuration files for setting up NAT based networking
%package daemon-config-nwfilter
Summary: Network filter configuration files for the libvirtd daemon
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
%description daemon-config-nwfilter
Network filter configuration files for cleaning guest traffic
%package daemon-driver-network
Summary: Network driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: dnsmasq >= 2.41
%if %{prefer_nftables}
Requires: nftables
%else
Requires: iptables
%endif
%description daemon-driver-network
The network driver plugin for the libvirtd daemon, providing
an implementation of the virtual network APIs using the Linux
bridge capabilities.
%package daemon-driver-nwfilter
Summary: Nwfilter driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: iptables
Requires: ebtables
%description daemon-driver-nwfilter
The nwfilter driver plugin for the libvirtd daemon, providing
an implementation of the firewall APIs using the ebtables,
iptables and ip6tables capabilities
%package daemon-driver-nodedev
Summary: Nodedev driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# needed for device enumeration
Requires: systemd >= 185
# For managing persistent mediated devices
# Note: for nodedev-update support at least mdevctl v1.3.0 is required
Requires: mdevctl
# for modprobe of pci devices
Requires: module-init-tools
%description daemon-driver-nodedev
The nodedev driver plugin for the libvirtd daemon, providing
an implementation of the node device APIs using the udev
capabilities.
%package daemon-driver-interface
Summary: Interface driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
%if %{with_netcf}
Requires: netcf-libs >= 0.2.2
%endif
%description daemon-driver-interface
The interface driver plugin for the libvirtd daemon, providing
an implementation of the host network interface APIs.
%package daemon-driver-secret
Summary: Secret driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
%description daemon-driver-secret
The secret driver plugin for the libvirtd daemon, providing
an implementation of the secret key APIs.
%package daemon-driver-storage-core
Summary: Storage driver plugin including base backends for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: nfs-utils
# For mkfs
Requires: util-linux
# For storage wiping with different algorithms
Requires: scrub
%if %{with_qemu}
# From QEMU RPMs
Requires: /usr/bin/qemu-img
%endif
%if !%{with_storage_rbd}
Obsoletes: libvirt-daemon-driver-storage-rbd < 5.2.0
%endif
Obsoletes: libvirt-daemon-driver-storage-sheepdog < 8.8.0
%description daemon-driver-storage-core
The storage driver plugin for the libvirtd daemon, providing
an implementation of the storage APIs using files, local disks, LVM, SCSI,
iSCSI, and multipath storage.
%package daemon-driver-storage-logical
Summary: Storage driver plugin for lvm volumes
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: lvm2
%description daemon-driver-storage-logical
The storage driver backend adding implementation of the storage APIs for block
volumes using lvm.
%package daemon-driver-storage-disk
Summary: Storage driver plugin for disk
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: parted
Requires: device-mapper
%description daemon-driver-storage-disk
The storage driver backend adding implementation of the storage APIs for block
volumes using the host disks.
%package daemon-driver-storage-scsi
Summary: Storage driver plugin for local scsi devices
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
%description daemon-driver-storage-scsi
The storage driver backend adding implementation of the storage APIs for scsi
host devices.
%package daemon-driver-storage-iscsi
Summary: Storage driver plugin for iscsi
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: iscsi-initiator-utils
%description daemon-driver-storage-iscsi
The storage driver backend adding implementation of the storage APIs for iscsi
volumes using the host iscsi stack.
%if %{with_storage_iscsi_direct}
%package daemon-driver-storage-iscsi-direct
Summary: Storage driver plugin for iscsi-direct
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
%description daemon-driver-storage-iscsi-direct
The storage driver backend adding implementation of the storage APIs for iscsi
volumes using libiscsi direct connection.
%endif
%package daemon-driver-storage-mpath
Summary: Storage driver plugin for multipath volumes
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: device-mapper
%description daemon-driver-storage-mpath
The storage driver backend adding implementation of the storage APIs for
multipath storage using device mapper.
%if %{with_storage_gluster}
%package daemon-driver-storage-gluster
Summary: Storage driver plugin for gluster
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
%if 0%{?fedora}
Requires: glusterfs-client >= 2.0.1
%endif
%if 0%{?fedora} || 0%{?with_storage_gluster}
Requires: /usr/sbin/gluster
%endif
%description daemon-driver-storage-gluster
The storage driver backend adding implementation of the storage APIs for gluster
volumes using libgfapi.
%endif
%if %{with_storage_rbd}
%package daemon-driver-storage-rbd
Summary: Storage driver plugin for rbd
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
%description daemon-driver-storage-rbd
The storage driver backend adding implementation of the storage APIs for rbd
volumes using the ceph protocol.
%endif
%if %{with_storage_zfs}
%package daemon-driver-storage-zfs
Summary: Storage driver plugin for ZFS
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# Support any conforming implementation of zfs
Requires: /sbin/zfs
Requires: /sbin/zpool
%description daemon-driver-storage-zfs
The storage driver backend adding implementation of the storage APIs for
ZFS volumes.
%endif
%package daemon-driver-storage
Summary: Storage driver plugin including all backends for the libvirtd daemon
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release}
%if %{with_storage_iscsi_direct}
Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release}
%endif
%if %{with_storage_gluster}
Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release}
%endif
%if %{with_storage_rbd}
Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release}
%endif
%if %{with_storage_zfs}
Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release}
%endif
%description daemon-driver-storage
The storage driver plugin for the libvirtd daemon, providing
an implementation of the storage APIs using LVM, iSCSI,
parted and more.
%if %{with_qemu}
%package daemon-driver-qemu
Summary: QEMU driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-daemon-log = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: /usr/bin/qemu-img
# For image compression
Requires: gzip
Requires: bzip2
Requires: lzop
Requires: xz
Requires: zstd
Requires: systemd-container
Requires: swtpm-tools
%if %{with_numad}
Requires: numad
%endif
%if 0%{?fedora} || 0%{?rhel} >= 9
Recommends: passt
Recommends: passt-selinux
%endif
%if %{with_nbdkit}
Recommends: nbdkit
Recommends: nbdkit-curl-plugin
Recommends: nbdkit-ssh-plugin
%endif
%description daemon-driver-qemu
The qemu driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
QEMU
%endif
%if %{with_lxc}
%package daemon-driver-lxc
Summary: LXC driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# There really is a hard cross-driver dependency here
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: systemd-container
# for modprobe of nbd driver
Requires: module-init-tools
%if %{with_numad}
Requires: numad
%endif
%description daemon-driver-lxc
The LXC driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
the Linux kernel
%endif
%if %{with_vbox}
%package daemon-driver-vbox
Summary: VirtualBox driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
%description daemon-driver-vbox
The vbox driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
VirtualBox
%endif
%if %{with_libxl}
%package daemon-driver-libxl
Summary: Libxl driver plugin for the libvirtd daemon
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Obsoletes: libvirt-daemon-driver-xen < 4.3.0
%description daemon-driver-libxl
The Libxl driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
Libxl
%endif
%if %{with_qemu_tcg}
%package daemon-qemu
Summary: Server side daemon & driver required to run QEMU guests
%if %{with_modular_daemons}
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-daemon-log = %{version}-%{release}
Requires: libvirt-daemon-lock = %{version}-%{release}
Requires: libvirt-daemon-plugin-lockd = %{version}-%{release}
Requires: libvirt-daemon-proxy = %{version}-%{release}
Recommends: libvirt-daemon = %{version}-%{release}
%else
Requires: libvirt-daemon = %{version}-%{release}
%endif
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: libvirt-ssh-proxy = %{version}-%{release}
Requires: qemu
%description daemon-qemu
Server side daemon and driver required to manage the virtualization
capabilities of the QEMU TCG emulators
%endif
%if %{with_qemu_kvm}
%package daemon-kvm
Summary: Server side daemon & driver required to run KVM guests
%if %{with_modular_daemons}
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-daemon-log = %{version}-%{release}
Requires: libvirt-daemon-lock = %{version}-%{release}
Requires: libvirt-daemon-plugin-lockd = %{version}-%{release}
Requires: libvirt-daemon-proxy = %{version}-%{release}
Recommends: libvirt-daemon = %{version}-%{release}
%else
Requires: libvirt-daemon = %{version}-%{release}
%endif
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: libvirt-ssh-proxy = %{version}-%{release}
Requires: qemu-kvm
%description daemon-kvm
Server side daemon and driver required to manage the virtualization
capabilities of the KVM hypervisor
%endif
%if %{with_lxc}
%package daemon-lxc
Summary: Server side daemon & driver required to run LXC guests
%if %{with_modular_daemons}
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-daemon-proxy = %{version}-%{release}
Recommends: libvirt-daemon = %{version}-%{release}
%else
Requires: libvirt-daemon = %{version}-%{release}
%endif
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
%description daemon-lxc
Server side daemon and driver required to manage the virtualization
capabilities of LXC
%endif
%if %{with_libxl}
%package daemon-xen
Summary: Server side daemon & driver required to run XEN guests
%if %{with_modular_daemons}
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-daemon-lock = %{version}-%{release}
Requires: libvirt-daemon-plugin-lockd = %{version}-%{release}
Requires: libvirt-daemon-proxy = %{version}-%{release}
Recommends: libvirt-daemon = %{version}-%{release}
%else
Requires: libvirt-daemon = %{version}-%{release}
%endif
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: xen
%description daemon-xen
Server side daemon and driver required to manage the virtualization
capabilities of XEN
%endif
%if %{with_vbox}
%package daemon-vbox
Summary: Server side daemon & driver required to run VirtualBox guests
%if %{with_modular_daemons}
Requires: libvirt-daemon-common = %{version}-%{release}
Requires: libvirt-daemon-proxy = %{version}-%{release}
Recommends: libvirt-daemon = %{version}-%{release}
%else
Requires: libvirt-daemon = %{version}-%{release}
%endif
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
%description daemon-vbox
Server side daemon and driver required to manage the virtualization
capabilities of VirtualBox
%endif
%package client
Summary: Client side utilities of the libvirt library
Requires: libvirt-libs = %{version}-%{release}
# Ensure smooth upgrades
Obsoletes: libvirt-bash-completion < 7.3.0
%description client
The client binaries needed to access the virtualization
capabilities of recent versions of Linux (and other OSes).
%package client-qemu
Summary: Additional client side utilities for QEMU
Requires: libvirt-libs = %{version}-%{release}
Requires: python3-libvirt >= 3.7.0
Requires: python3-cryptography
Requires: python3-lxml
%description client-qemu
The additional client binaries are used to interact
with some QEMU specific features of libvirt.
%package libs
Summary: Client side libraries
# Needed by default sasl.conf - no onerous extra deps, since
# 100's of other things on a system already pull in krb5-libs
Requires: cyrus-sasl-gssapi
%description libs
Shared libraries for accessing the libvirt daemon.
%if %{with_wireshark}
%package wireshark
Summary: Wireshark dissector plugin for libvirt RPC transactions
Requires: wireshark
Requires: libvirt-libs = %{version}-%{release}
%description wireshark
Wireshark dissector plugin for better analysis of libvirt RPC traffic.
%endif
%if %{with_lxc}
%package login-shell
Summary: Login shell for connecting users to an LXC container
Requires: libvirt-libs = %{version}-%{release}
%description login-shell
Provides the set-uid virt-login-shell binary that is used to
connect a user to an LXC container when they login, by switching
namespaces.
%endif
%package devel
Summary: Libraries, includes, etc. to compile with the libvirt library
Requires: libvirt-libs = %{version}-%{release}
Requires: pkgconfig
%description devel
Include header files & development libraries for the libvirt C library.
%if %{with_sanlock}
%package daemon-plugin-sanlock
Summary: Sanlock lock manager plugin for QEMU driver
Requires: sanlock >= 2.4
#for virt-sanlock-cleanup require augeas
Requires: augeas
Requires: libvirt-libs = %{version}-%{release}
Obsoletes: libvirt-lock-sanlock < 9.1.0
Provides: libvirt-lock-sanlock = %{version}-%{release}
%description daemon-plugin-sanlock
Includes the Sanlock lock manager plugin for the QEMU
driver
%endif
%package nss
Summary: Libvirt plugin for Name Service Switch
Requires: libvirt-daemon-driver-network = %{version}-%{release}
%description nss
Libvirt plugin for NSS for translating domain names into IP addresses.
%endif
%package ssh-proxy
Summary: Libvirt SSH proxy
Requires: libvirt-libs = %{version}-%{release}
%description ssh-proxy
Allows SSH into domains via VSOCK without need for network.
%if %{with_mingw32}
%package -n mingw32-libvirt
Summary: %{summary}
Obsoletes: mingw32-libvirt-static < 7.0.0
BuildArch: noarch
%description -n mingw32-libvirt
MinGW Windows libvirt virtualization library.
%{?mingw32_debug_package}
%endif
%if %{with_mingw64}
%package -n mingw64-libvirt
Summary: %{summary}
Obsoletes: mingw64-libvirt-static < 7.0.0
BuildArch: noarch
%description -n mingw64-libvirt
MinGW Windows libvirt virtualization library.
%{?mingw64_debug_package}
%endif
%prep
%autosetup -S git_am
%build
%if 0%{?fedora} >= %{min_fedora} || 0%{?rhel} >= %{min_rhel}
%define supported_platform 1
%else
%define supported_platform 0
%endif
%if ! %{supported_platform}
echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}"
exit 1
%endif
%if %{with_qemu}
%define arg_qemu -Ddriver_qemu=enabled
%else
%define arg_qemu -Ddriver_qemu=disabled
%endif
%if %{with_openvz}
%define arg_openvz -Ddriver_openvz=enabled
%else
%define arg_openvz -Ddriver_openvz=disabled
%endif
%if %{with_lxc}
%define arg_lxc -Ddriver_lxc=enabled
%define arg_login_shell -Dlogin_shell=enabled
%else
%define arg_lxc -Ddriver_lxc=disabled
%define arg_login_shell -Dlogin_shell=disabled
%endif
%if %{with_vbox}
%define arg_vbox -Ddriver_vbox=enabled
%else
%define arg_vbox -Ddriver_vbox=disabled
%endif
%if %{with_libxl}
%define arg_libxl -Ddriver_libxl=enabled
%else
%define arg_libxl -Ddriver_libxl=disabled
%endif
%if %{with_esx}
%define arg_esx -Ddriver_esx=enabled -Dcurl=enabled
%else
%define arg_esx -Ddriver_esx=disabled -Dcurl=disabled
%endif
%if %{with_hyperv}
%define arg_hyperv -Ddriver_hyperv=enabled -Dopenwsman=enabled
%else
%define arg_hyperv -Ddriver_hyperv=disabled -Dopenwsman=disabled
%endif
%if %{with_vmware}
%define arg_vmware -Ddriver_vmware=enabled
%else
%define arg_vmware -Ddriver_vmware=disabled
%endif
%if %{with_storage_rbd}
%define arg_storage_rbd -Dstorage_rbd=enabled
%else
%define arg_storage_rbd -Dstorage_rbd=disabled
%endif
%if %{with_storage_gluster}
%define arg_storage_gluster -Dstorage_gluster=enabled -Dglusterfs=enabled
%else
%define arg_storage_gluster -Dstorage_gluster=disabled -Dglusterfs=disabled
%endif
%if %{with_storage_zfs}
%define arg_storage_zfs -Dstorage_zfs=enabled
%else
%define arg_storage_zfs -Dstorage_zfs=disabled
%endif
%if %{with_numactl}
%define arg_numactl -Dnumactl=enabled
%else
%define arg_numactl -Dnumactl=disabled
%endif
%if %{with_numad}
%define arg_numad -Dnumad=enabled
%else
%define arg_numad -Dnumad=disabled
%endif
%if %{with_nbdkit}
%define arg_nbdkit -Dnbdkit=enabled
%else
%define arg_nbdkit -Dnbdkit=disabled
%endif
%if %{with_nbdkit_config_default}
%define arg_nbdkit_config_default -Dnbdkit_config_default=enabled
%else
%define arg_nbdkit_config_default -Dnbdkit_config_default=disabled
%endif
%if %{with_fuse}
%define arg_fuse -Dfuse=enabled
%else
%define arg_fuse -Dfuse=disabled
%endif
%if %{with_sanlock}
%define arg_sanlock -Dsanlock=enabled
%else
%define arg_sanlock -Dsanlock=disabled
%endif
%if %{with_firewalld_zone}
%define arg_firewalld_zone -Dfirewalld_zone=enabled
%else
%define arg_firewalld_zone -Dfirewalld_zone=disabled
%endif
%if %{with_netcf}
%define arg_netcf -Dnetcf=enabled
%else
%define arg_netcf -Dnetcf=disabled
%endif
%if %{with_wireshark}
%define arg_wireshark -Dwireshark_dissector=enabled
%else
%define arg_wireshark -Dwireshark_dissector=disabled
%endif
%if %{with_storage_iscsi_direct}
%define arg_storage_iscsi_direct -Dstorage_iscsi_direct=enabled -Dlibiscsi=enabled
%else
%define arg_storage_iscsi_direct -Dstorage_iscsi_direct=disabled -Dlibiscsi=disabled
%endif
%if %{with_libssh}
%define arg_libssh -Dlibssh=enabled
%else
%define arg_libssh -Dlibssh=disabled
%endif
%if %{with_libssh2}
%define arg_libssh2 -Dlibssh2=enabled
%else
%define arg_libssh2 -Dlibssh2=disabled
%endif
%if %{with_modular_daemons}
%define arg_remote_mode -Dremote_default_mode=direct
%else
%define arg_remote_mode -Dremote_default_mode=legacy
%endif
%if %{with_userfaultfd_sysctl}
%define arg_userfaultfd_sysctl -Duserfaultfd_sysctl=enabled
%else
%define arg_userfaultfd_sysctl -Duserfaultfd_sysctl=disabled
%endif
%define when %(date +"%%F-%%T")
%define where %(hostname)
%define who %{?packager}%{!?packager:Unknown}
%define arg_packager -Dpackager="%{who}, %{when}, %{where}"
%define arg_packager_version -Dpackager_version="%{release}"
%define arg_selinux_mount -Dselinux_mount="/sys/fs/selinux"
# place macros above and build commands below this comment
export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec)
%if %{with_native}
%meson \
-Drunstatedir=%{_rundir} \
-Dinitconfdir=%{_sysconfdir}/sysconfig \
-Dunitdir=%{_unitdir} \
-Dsysusersdir=%{_sysusersdir} \
%{?arg_qemu} \
%{?arg_openvz} \
%{?arg_lxc} \
%{?arg_vbox} \
%{?arg_libxl} \
-Dsasl=enabled \
-Dpolkit=enabled \
-Ddriver_libvirtd=enabled \
-Ddriver_remote=enabled \
-Ddriver_test=enabled \
%{?arg_esx} \
%{?arg_hyperv} \
%{?arg_vmware} \
-Ddriver_vz=disabled \
-Ddriver_bhyve=disabled \
-Ddriver_ch=disabled \
%{?arg_remote_mode} \
-Ddriver_interface=enabled \
-Ddriver_network=enabled \
-Dstorage_fs=enabled \
-Dstorage_lvm=enabled \
-Dstorage_iscsi=enabled \
%{?arg_storage_iscsi_direct} \
-Dstorage_scsi=enabled \
-Dstorage_disk=enabled \
-Dstorage_mpath=enabled \
%{?arg_storage_rbd} \
%{?arg_storage_gluster} \
%{?arg_storage_zfs} \
-Dstorage_vstorage=disabled \
%{?arg_numactl} \
%{?arg_numad} \
-Dcapng=enabled \
%{?arg_fuse} \
%{?arg_netcf} \
-Dnls=enabled \
-Dselinux=enabled \
%{?arg_selinux_mount} \
-Dapparmor=disabled \
-Dapparmor_profiles=disabled \
-Dsecdriver_apparmor=disabled \
-Dudev=enabled \
-Dyajl=enabled \
%{?arg_sanlock} \
-Dlibpcap=enabled \
%{?arg_nbdkit} \
%{?arg_nbdkit_config_default} \
-Dlibnl=enabled \
-Daudit=enabled \
-Ddtrace=enabled \
-Dfirewalld=enabled \
%{?arg_firewalld_zone} \
%{?arg_wireshark} \
%{?arg_libssh} \
%{?arg_libssh2} \
-Dpm_utils=disabled \
-Dnss=enabled \
%{arg_packager} \
%{arg_packager_version} \
-Dqemu_user=%{qemu_user} \
-Dqemu_group=%{qemu_group} \
-Dqemu_moddir=%{qemu_moddir} \
-Dqemu_datadir=%{qemu_datadir} \
-Dtls_priority=%{tls_priority} \
-Dsysctl_config=enabled \
%{?arg_userfaultfd_sysctl} \
-Dssh_proxy=enabled \
%{?enable_werror} \
-Dexpensive_tests=enabled \
-Dinit_script=systemd \
-Dfirewall_backend_priority=%{firewall_backend_priority} \
-Ddocs=enabled \
-Dtests=enabled \
-Drpath=disabled \
%{?arg_login_shell}
%meson_build
%endif
%if %{with_mingw32} || %{with_mingw64}
%mingw_meson \
--auto-features=enabled \
-Ddriver_remote=enabled \
-Ddriver_test=enabled \
-Ddriver_esx=enabled \
-Dcurl=enabled \
-Ddocs=enabled \
-Dapparmor=disabled \
-Dapparmor_profiles=disabled \
-Dattr=disabled \
-Daudit=disabled \
-Dbash_completion=disabled \
-Dblkid=disabled \
-Dcapng=disabled \
-Ddriver_bhyve=disabled \
-Ddriver_hyperv=disabled \
-Ddriver_interface=disabled \
-Ddriver_libvirtd=disabled \
-Ddriver_libxl=disabled \
-Ddriver_lxc=disabled \
-Ddriver_network=disabled \
-Ddriver_openvz=disabled \
-Ddriver_qemu=disabled \
-Ddriver_secrets=disabled \
-Ddriver_vbox=disabled \
-Ddriver_vmware=disabled \
-Ddriver_vz=disabled \
-Ddtrace=disabled \
-Dexpensive_tests=disabled \
-Dfirewalld=disabled \
-Dfirewalld_zone=disabled \
-Dfuse=disabled \
-Dglusterfs=disabled \
-Dhost_validate=disabled \
-Dlibiscsi=disabled \
-Dnbdkit=disabled \
-Dnbdkit_config_default=disabled \
-Dlibnl=disabled \
-Dlibpcap=disabled \
-Dlibssh2=disabled \
-Dlibssh=disabled \
-Dlogin_shell=disabled \
-Dnetcf=disabled \
-Dnls=enabled \
-Dnss=disabled \
-Dnumactl=disabled \
-Dnumad=disabled \
-Dopenwsman=disabled \
-Dpciaccess=disabled \
-Dpm_utils=disabled \
-Dpolkit=disabled \
-Dreadline=disabled \
-Drpath=disabled \
-Dsanlock=disabled \
-Dsasl=disabled \
-Dsecdriver_apparmor=disabled \
-Dsecdriver_selinux=disabled \
-Dselinux=disabled \
-Dstorage_dir=disabled \
-Dstorage_disk=disabled \
-Dstorage_fs=disabled \
-Dstorage_gluster=disabled \
-Dstorage_iscsi_direct=disabled \
-Dstorage_iscsi=disabled \
-Dstorage_lvm=disabled \
-Dstorage_mpath=disabled \
-Dstorage_rbd=disabled \
-Dstorage_scsi=disabled \
-Dstorage_vstorage=disabled \
-Dstorage_zfs=disabled \
-Dsysctl_config=disabled \
-Duserfaultfd_sysctl=disabled \
-Dssh_proxy=disabled \
-Dtests=disabled \
-Dudev=disabled \
-Dwireshark_dissector=disabled \
-Dyajl=disabled \
%{?enable_werror}
%mingw_ninja
%endif
%install
rm -fr %{buildroot}
export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec)
%if %{with_native}
%meson_install
# We don't want to install /etc/libvirt/qemu/networks in the main %%files list
# because if the admin wants to delete the default network completely, we don't
# want to end up re-incarnating it on every RPM upgrade.
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
$RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
# libvirt saves this file with mode 0600
chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
# nwfilter files are installed in /usr/share/libvirt and copied to /etc in %%post
# to avoid verification errors on changed files in /etc
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \
$RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
# libvirt saves these files with mode 600
chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml
%if ! %{with_qemu}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
rm -f $RPM_BUILD_ROOT%{_sysusersdir}/libvirt-qemu.conf
%endif
%find_lang %{name}
%if ! %{with_sanlock}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
%endif
%if ! %{with_lxc}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%endif
%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
%endif
%if ! %{with_lxc}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
%endif
%if ! %{with_libxl}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
%endif
# Copied into libvirt-docs subpackage eventually
mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs
%ifarch %{arches_systemtap_64bit}
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
$RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
%if %{with_qemu}
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
$RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
%endif
%endif
%endif
%if %{with_mingw32} || %{with_mingw64}
%mingw_ninja_install
%endif
%if %{with_mingw32}
rm -rf $RPM_BUILD_ROOT%{mingw32_sysconfdir}/libvirt/nwfilter
rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/doc/*
rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/gtk-doc/*
rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt_iohelper.exe
rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt-guests.sh
%endif
%if %{with_mingw64}
rm -rf $RPM_BUILD_ROOT%{mingw64_sysconfdir}/libvirt/nwfilter
rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/doc/*
rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/gtk-doc/*
rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt_iohelper.exe
rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt-guests.sh
%endif
%if %{with_mingw32} || %{with_mingw64}
%mingw_debug_install_post
%mingw_find_lang %{name}
%endif
%check
%if %{with_native}
# Building on slow archs, like emulated s390x in Fedora copr, requires
# raising the test timeout
export VIR_TEST_DEBUG=1
%meson_test --no-suite syntax-check --timeout-multiplier 10
%endif
%define libvirt_rpmstatedir %{_localstatedir}/lib/rpm-state/libvirt
# Mark units such that presets will later be applied to them. Meant
# to be called during %pre. Units that already exist on the system
# will not be marked, with the assumption that presets have already
# been applied at some point in the past. This makes it safe to call
# this macro for all units each time %pre runs.
%define libvirt_systemd_schedule_preset() \
mkdir -p %{libvirt_rpmstatedir} || : \
for unit in %{?*}; do \
if ! test -e %{_unitdir}/$unit; then \
touch %{libvirt_rpmstatedir}/preset-$unit || : \
fi \
done \
%{nil}
# Apply presets for units that have previously been marked. Meant to
# be called during %posttrans. Note that foo.service must be passed
# as the first argument, before all the various foo*.socket
# associated with it, for things to work correctly. This is necessary
# because Also=foo.socket is usually present in foo.service's
# [Install] section, and we want that configuration to take
# precedence over foo.socket's own presets.
%define libvirt_systemd_perform_preset() \
%{?7:%{error:Too many arguments}} \
for unit in %{?2} %{?3} %{?4} %{?5} %{?6} %1; do \
if test -e %{libvirt_rpmstatedir}/preset-$unit; then \
/usr/bin/systemctl --no-reload preset $unit || : \
fi \
rm -f %{libvirt_rpmstatedir}/preset-$unit \
done \
rmdir %{libvirt_rpmstatedir} 2>/dev/null || : \
%{nil}
# Mark a single unit for restart. Meant to be called during %pre.
%define libvirt_systemd_schedule_restart() \
mkdir -p %{libvirt_rpmstatedir} || : \
touch %{libvirt_rpmstatedir}/restart-%1 || : \
%{nil}
# Restart a unit that was previously marked. Meant to be called
# during %posttrans. If systemd is not running, no action will be
# performed.
%define libvirt_systemd_perform_restart() \
if test -d /run/systemd/system && \
test -e %{libvirt_rpmstatedir}/restart-%1; then \
/usr/bin/systemctl try-restart %1 >/dev/null 2>&1 || : \
fi \
rm -f %{libvirt_rpmstatedir}/restart-%1 \
rmdir %{libvirt_rpmstatedir} 2>/dev/null || : \
%{nil}
# Mark a single unit for reload. Meant to be called during %pre.
%define libvirt_systemd_schedule_reload() \
mkdir -p %{libvirt_rpmstatedir} || : \
touch %{libvirt_rpmstatedir}/reload-%1 || : \
%{nil}
# Reload a unit that was previously marked. Meant to be called during
# %posttrans. If systemd is not running, no action will be performed.
%define libvirt_systemd_perform_reload() \
if test -d /run/systemd/system && \
test -e %{libvirt_rpmstatedir}/reload-%1; then \
/usr/bin/systemctl try-reload-or-restart %1 >/dev/null 2>&1 || : \
fi \
rm -f %{libvirt_rpmstatedir}/reload-%1 \
rmdir %{libvirt_rpmstatedir} 2>/dev/null || : \
%{nil}
# Disable a single unit, optionally stopping it if systemd is
# running. Meant to be called during %preun.
%define libvirt_systemd_disable() \
if test -d /run/systemd/system; then \
/usr/bin/systemctl --no-reload disable --now %{?*} || : \
else \
/usr/bin/systemctl --no-reload disable %{?*} || : \
fi \
%{nil}
# %pre implementation for services that should be restarted on
# upgrade. Note that foo.service must be passed as the first
# argument, before all the various foo*.socket associated with it.
%define libvirt_systemd_restart_pre() \
%libvirt_systemd_schedule_preset %{?*} \
%libvirt_systemd_schedule_restart %1 \
%{nil}
# %pre implementation for services that should be reloaded on
# upgrade. Note that foo.service must be passed as the first
# argument, before all the various foo*.socket associated with it.
%define libvirt_systemd_reload_pre() \
%libvirt_systemd_schedule_preset %{?*} \
%libvirt_systemd_schedule_reload %1 \
%{nil}
# %pre implementation for services that should be neither restarted
# nor reloaded on upgrade.
%define libvirt_systemd_noaction_pre() \
%libvirt_systemd_schedule_preset %{?*} \
%{nil}
# %posttrans implementation for all services. We can use a single
# macro to cover all scenarios, because each operation will only be
# performed if it had previously been scheduled. Note that
# foo.service must be passed as the first argument, before all the
# various foo*.socket associated with it.
%define libvirt_systemd_posttrans() \
%libvirt_systemd_perform_preset %{?*} \
%libvirt_systemd_perform_reload %1 \
%libvirt_systemd_perform_restart %1 \
%{nil}
# %preun implementation for all services.
%define libvirt_systemd_preun() \
if [ $1 -lt 1 ]; then \
%libvirt_systemd_disable %{?*} \
fi \
%{nil}
# For daemons with only UNIX sockets
%define libvirt_systemd_unix_pre() %libvirt_systemd_restart_pre %1.service %1.socket %1-ro.socket %1-admin.socket
%define libvirt_systemd_unix_posttrans() %libvirt_systemd_posttrans %1.service %1.socket %1-ro.socket %1-admin.socket
%define libvirt_systemd_unix_preun() %libvirt_systemd_preun %1.service %1.socket %1-ro.socket %1-admin.socket
# For daemons with UNIX and INET sockets
%define libvirt_systemd_inet_pre() %libvirt_systemd_restart_pre %1.service %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket
%define libvirt_systemd_inet_posttrans() %libvirt_systemd_posttrans %1.service %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket
%define libvirt_systemd_inet_preun() %libvirt_systemd_preun %1.service %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket
# For daemons with only UNIX sockets and no unprivileged read-only access
%define libvirt_systemd_privileged_pre() %libvirt_systemd_reload_pre %1.service %1.socket %1-admin.socket
%define libvirt_systemd_privileged_posttrans() %libvirt_systemd_posttrans %1.service %1.socket %1-admin.socket
%define libvirt_systemd_privileged_preun() %libvirt_systemd_preun %1.service %1.socket %1-admin.socket
# For one-shot daemons that have no associated sockets and should never be restarted
%define libvirt_systemd_oneshot_pre() %libvirt_systemd_noaction_pre %1.service
%define libvirt_systemd_oneshot_posttrans() %libvirt_systemd_posttrans %1.service
%define libvirt_systemd_oneshot_preun() %libvirt_systemd_preun %1.service
# For packages that install configuration for other daemons
%define libvirt_systemd_config_pre() %libvirt_systemd_schedule_restart %1.service
%define libvirt_systemd_config_posttrans() %libvirt_systemd_perform_restart %1.service
%if %{with_native}
%pre daemon
%libvirt_sysconfig_pre libvirtd
%libvirt_systemd_inet_pre libvirtd
%posttrans daemon
%libvirt_sysconfig_posttrans libvirtd
%libvirt_systemd_inet_posttrans libvirtd
%preun daemon
%libvirt_systemd_inet_preun libvirtd
%pre daemon-common
%libvirt_sysconfig_pre libvirt-guests
%libvirt_systemd_oneshot_pre libvirt-guests
# 'libvirt' group is just to allow password-less polkit access to libvirt
# daemons. The uid number is irrelevant, so we use dynamic allocation.
getent group libvirt >/dev/null || groupadd -r libvirt
exit 0
%posttrans daemon-common
%libvirt_sysconfig_posttrans libvirt-guests
%libvirt_systemd_oneshot_posttrans libvirt-guests
%preun daemon-common
%libvirt_systemd_oneshot_preun libvirt-guests
%pre daemon-lock
%libvirt_sysconfig_pre virtlockd
%libvirt_systemd_privileged_pre virtlockd
%posttrans daemon-lock
%libvirt_sysconfig_posttrans virtlockd
%libvirt_systemd_privileged_posttrans virtlockd
%preun daemon-lock
%libvirt_systemd_privileged_preun virtlockd
%pre daemon-log
%libvirt_sysconfig_pre virtlogd
%libvirt_systemd_privileged_pre virtlogd
%posttrans daemon-log
%libvirt_sysconfig_posttrans virtlogd
%libvirt_systemd_privileged_posttrans virtlogd
%preun daemon-log
%libvirt_systemd_privileged_preun virtlogd
%pre daemon-proxy
%libvirt_sysconfig_pre virtproxyd
%libvirt_systemd_inet_pre virtproxyd
%posttrans daemon-proxy
%libvirt_sysconfig_posttrans virtproxyd
%libvirt_systemd_inet_posttrans virtproxyd
%preun daemon-proxy
%libvirt_systemd_inet_preun virtproxyd
%pre daemon-driver-network
%libvirt_sysconfig_pre virtnetworkd
%libvirt_systemd_unix_pre virtnetworkd
%post daemon-driver-network
%if %{with_firewalld_zone}
%firewalld_reload
%endif
%posttrans daemon-driver-network
%libvirt_sysconfig_posttrans virtnetworkd
%libvirt_systemd_unix_posttrans virtnetworkd
%preun daemon-driver-network
%libvirt_systemd_unix_preun virtnetworkd
%postun daemon-driver-network
%if %{with_firewalld_zone}
%firewalld_reload
%endif
%pre daemon-driver-nwfilter
%libvirt_sysconfig_pre virtnwfilterd
%libvirt_systemd_unix_pre virtnwfilterd
%posttrans daemon-driver-nwfilter
%libvirt_sysconfig_posttrans virtnwfilterd
%libvirt_systemd_unix_posttrans virtnwfilterd
%preun daemon-driver-nwfilter
%libvirt_systemd_unix_preun virtnwfilterd
%pre daemon-driver-nodedev
%libvirt_sysconfig_pre virtnodedevd
%libvirt_systemd_unix_pre virtnodedevd
%posttrans daemon-driver-nodedev
%libvirt_sysconfig_posttrans virtnodedevd
%libvirt_systemd_unix_posttrans virtnodedevd
%preun daemon-driver-nodedev
%libvirt_systemd_unix_preun virtnodedevd
%pre daemon-driver-interface
%libvirt_sysconfig_pre virtinterfaced
%libvirt_systemd_unix_pre virtinterfaced
%posttrans daemon-driver-interface
%libvirt_sysconfig_posttrans virtinterfaced
%libvirt_systemd_unix_posttrans virtinterfaced
%preun daemon-driver-interface
%libvirt_systemd_unix_preun virtinterfaced
%pre daemon-driver-secret
%libvirt_sysconfig_pre virtsecretd
%libvirt_systemd_unix_pre virtsecretd
%posttrans daemon-driver-secret
%libvirt_sysconfig_posttrans virtsecretd
%libvirt_systemd_unix_posttrans virtsecretd
%preun daemon-driver-secret
%libvirt_systemd_unix_preun virtsecretd
%pre daemon-driver-storage-core
%libvirt_sysconfig_pre virtstoraged
%libvirt_systemd_unix_pre virtstoraged
%posttrans daemon-driver-storage-core
%libvirt_sysconfig_posttrans virtstoraged
%libvirt_systemd_unix_posttrans virtstoraged
%preun daemon-driver-storage-core
%libvirt_systemd_unix_preun virtstoraged
%if %{with_qemu}
%pre daemon-driver-qemu
%libvirt_sysconfig_pre virtqemud
%libvirt_systemd_unix_pre virtqemud
# We want soft static allocation of well-known ids, as disk images
# are commonly shared across NFS mounts by id rather than name.
# See https://docs.fedoraproject.org/en-US/packaging-guidelines/UsersAndGroups/
# We can not use the sysusers_create_compat macro here as we want to keep the
# specfile standalone and not relying on additionnal files.
getent group 'kvm' >/dev/null || groupadd -f -g '36' -r 'kvm' || :
getent group 'qemu' >/dev/null || groupadd -f -g '107' -r 'qemu' || :
if ! getent passwd 'qemu' >/dev/null; then
if ! getent passwd '107' >/dev/null; then
useradd -r -u '107' -g 'qemu' -G 'kvm' -d '/' -s '/sbin/nologin' -c 'qemu user' 'qemu' || :
else
useradd -r -g 'qemu' -G 'kvm' -d '/' -s '/sbin/nologin' -c 'qemu user' 'qemu' || :
fi
fi
exit 0
%posttrans daemon-driver-qemu
%libvirt_sysconfig_posttrans virtqemud
%libvirt_systemd_unix_posttrans virtqemud
%preun daemon-driver-qemu
%libvirt_systemd_unix_preun virtqemud
%endif
%if %{with_lxc}
%pre daemon-driver-lxc
%libvirt_sysconfig_pre virtlxcd
%libvirt_systemd_unix_pre virtlxcd
%posttrans daemon-driver-lxc
%libvirt_sysconfig_posttrans virtlxcd
%libvirt_systemd_unix_posttrans virtlxcd
%preun daemon-driver-lxc
%libvirt_systemd_unix_preun virtlxcd
%endif
%if %{with_vbox}
%pre daemon-driver-vbox
%libvirt_sysconfig_pre virtvboxd
%libvirt_systemd_unix_pre virtvboxd
%posttrans daemon-driver-vbox
%libvirt_sysconfig_posttrans virtvboxd
%libvirt_systemd_unix_posttrans virtvboxd
%preun daemon-driver-vbox
%libvirt_systemd_unix_preun virtvboxd
%endif
%if %{with_libxl}
%pre daemon-driver-libxl
%libvirt_sysconfig_pre virtxend
%libvirt_systemd_unix_pre virtxend
%posttrans daemon-driver-libxl
%libvirt_sysconfig_posttrans virtxend
%libvirt_systemd_unix_posttrans virtxend
%preun daemon-driver-libxl
%libvirt_systemd_unix_preun virtxend
%endif
%pre daemon-config-network
%libvirt_systemd_config_pre libvirtd
%libvirt_systemd_config_pre virtnetworkd
%post daemon-config-network
if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
# see if the network used by default network creates a conflict,
# and try to resolve it
# NB: 192.168.122.0/24 is used in the default.xml template file;
# do not modify any of those values here without also modifying
# them in the template.
orig_sub=122
sub=${orig_sub}
nl='
'
routes="${nl}$(ip route show | cut -d' ' -f1)${nl}"
case ${routes} in
*"${nl}192.168.${orig_sub}.0/24${nl}"*)
# there was a match, so we need to look for an unused subnet
for new_sub in $(seq 124 254); do
case ${routes} in
*"${nl}192.168.${new_sub}.0/24${nl}"*)
;;
*)
sub=$new_sub
break;
;;
esac
done
;;
*)
;;
esac
sed -e "s/${orig_sub}/${sub}/g" \
< %{_datadir}/libvirt/networks/default.xml \
> %{_sysconfdir}/libvirt/qemu/networks/default.xml
ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
# libvirt saves this file with mode 0600
chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml
fi
%posttrans daemon-config-network
%libvirt_systemd_config_posttrans libvirtd
%libvirt_systemd_config_posttrans virtnetworkd
%pre daemon-config-nwfilter
%libvirt_systemd_config_pre libvirtd
%libvirt_systemd_config_pre virtnwfilterd
%post daemon-config-nwfilter
for datadir_file in %{_datadir}/libvirt/nwfilter/*.xml; do
sysconfdir_file=%{_sysconfdir}/libvirt/nwfilter/$(basename "$datadir_file")
if [ ! -f "$sysconfdir_file" ]; then
# libvirt saves these files with mode 600
install -m 0600 "$datadir_file" "$sysconfdir_file"
fi
done
%posttrans daemon-config-nwfilter
%libvirt_systemd_config_posttrans libvirtd
%libvirt_systemd_config_posttrans virtnwfilterd
%if %{with_lxc}
%pre login-shell
getent group virtlogin >/dev/null || groupadd -r virtlogin
exit 0
%endif
%endif
%if %{with_native}
%files
%files docs
%doc AUTHORS.rst NEWS.rst README.rst
%doc libvirt-docs/*
%files daemon
%{_unitdir}/libvirtd.service
%{_unitdir}/libvirtd.socket
%{_unitdir}/libvirtd-ro.socket
%{_unitdir}/libvirtd-admin.socket
%{_unitdir}/libvirtd-tcp.socket
%{_unitdir}/libvirtd-tls.socket
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
%config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
%{_datadir}/augeas/lenses/libvirtd.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
%attr(0755, root, root) %{_sbindir}/libvirtd
%{_mandir}/man8/libvirtd.8*
%files daemon-common
%{_unitdir}/virt-guest-shutdown.target
%{_unitdir}/libvirt-guests.service
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
%dir %{_datadir}/libvirt/
%ghost %dir %{_rundir}/libvirt/
%ghost %dir %{_rundir}/libvirt/common/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
%dir %attr(0755, root, root) %{_libdir}/libvirt/
%dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/
%dir %attr(0755, root, root) %{_libdir}/libvirt/storage-backend/
%dir %attr(0755, root, root) %{_libdir}/libvirt/storage-file/
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
%{_datadir}/polkit-1/actions/org.libvirt.api.policy
%{_datadir}/polkit-1/rules.d/50-libvirt.rules
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
%attr(0755, root, root) %{_bindir}/virt-ssh-helper
%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
%{_mandir}/man1/virt-admin.1*
%{_mandir}/man1/virt-host-validate.1*
%{_mandir}/man8/virt-ssh-helper.8*
%{_mandir}/man8/libvirt-guests.8*
%{_bindir}/virt-host-validate
%{_bindir}/virt-admin
%{_datadir}/bash-completion/completions/virt-admin
%files daemon-lock
%{_unitdir}/virtlockd.service
%{_unitdir}/virtlockd.socket
%{_unitdir}/virtlockd-admin.socket
%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
%{_datadir}/augeas/lenses/virtlockd.aug
%{_datadir}/augeas/lenses/tests/test_virtlockd.aug
%{_datadir}/augeas/lenses/libvirt_lockd.aug
%if %{with_qemu}
%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
%endif
%attr(0755, root, root) %{_sbindir}/virtlockd
%{_mandir}/man8/virtlockd.8*
%files daemon-plugin-lockd
%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
%files daemon-log
%{_unitdir}/virtlogd.service
%{_unitdir}/virtlogd.socket
%{_unitdir}/virtlogd-admin.socket
%config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf
%{_datadir}/augeas/lenses/virtlogd.aug
%{_datadir}/augeas/lenses/tests/test_virtlogd.aug
%attr(0755, root, root) %{_sbindir}/virtlogd
%{_mandir}/man8/virtlogd.8*
%files daemon-proxy
%{_unitdir}/virtproxyd.service
%{_unitdir}/virtproxyd.socket
%{_unitdir}/virtproxyd-ro.socket
%{_unitdir}/virtproxyd-admin.socket
%{_unitdir}/virtproxyd-tcp.socket
%{_unitdir}/virtproxyd-tls.socket
%config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf
%{_datadir}/augeas/lenses/virtproxyd.aug
%{_datadir}/augeas/lenses/tests/test_virtproxyd.aug
%attr(0755, root, root) %{_sbindir}/virtproxyd
%{_mandir}/man8/virtproxyd.8*
%files daemon-config-network
%dir %{_datadir}/libvirt/networks/
%{_datadir}/libvirt/networks/default.xml
%ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml
%ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
%files daemon-config-nwfilter
%dir %{_datadir}/libvirt/nwfilter/
%{_datadir}/libvirt/nwfilter/*.xml
%ghost %{_sysconfdir}/libvirt/nwfilter/*.xml
%files daemon-driver-interface
%config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf
%{_datadir}/augeas/lenses/virtinterfaced.aug
%{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug
%{_unitdir}/virtinterfaced.service
%{_unitdir}/virtinterfaced.socket
%{_unitdir}/virtinterfaced-ro.socket
%{_unitdir}/virtinterfaced-admin.socket
%attr(0755, root, root) %{_sbindir}/virtinterfaced
%ghost %dir %{_rundir}/libvirt/interface/
%{_libdir}/libvirt/connection-driver/libvirt_driver_interface.so
%{_mandir}/man8/virtinterfaced.8*
%files daemon-driver-network
%config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf
%{_datadir}/augeas/lenses/virtnetworkd.aug
%{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug
%config(noreplace) %{_sysconfdir}/libvirt/network.conf
%{_datadir}/augeas/lenses/libvirtd_network.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_network.aug
%{_unitdir}/virtnetworkd.service
%{_unitdir}/virtnetworkd.socket
%{_unitdir}/virtnetworkd-ro.socket
%{_unitdir}/virtnetworkd-admin.socket
%attr(0755, root, root) %{_sbindir}/virtnetworkd
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
%ghost %dir %{_rundir}/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
%{_libdir}/libvirt/connection-driver/libvirt_driver_network.so
%{_mandir}/man8/virtnetworkd.8*
%if %{with_firewalld_zone}
%{_prefix}/lib/firewalld/zones/libvirt.xml
%{_prefix}/lib/firewalld/zones/libvirt-routed.xml
%{_prefix}/lib/firewalld/policies/libvirt-routed-in.xml
%{_prefix}/lib/firewalld/policies/libvirt-routed-out.xml
%{_prefix}/lib/firewalld/policies/libvirt-to-host.xml
%endif
%files daemon-driver-nodedev
%config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf
%{_datadir}/augeas/lenses/virtnodedevd.aug
%{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug
%{_unitdir}/virtnodedevd.service
%{_unitdir}/virtnodedevd.socket
%{_unitdir}/virtnodedevd-ro.socket
%{_unitdir}/virtnodedevd-admin.socket
%attr(0755, root, root) %{_sbindir}/virtnodedevd
%ghost %dir %{_rundir}/libvirt/nodedev/
%{_libdir}/libvirt/connection-driver/libvirt_driver_nodedev.so
%{_mandir}/man8/virtnodedevd.8*
%files daemon-driver-nwfilter
%config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf
%{_datadir}/augeas/lenses/virtnwfilterd.aug
%{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug
%{_unitdir}/virtnwfilterd.service
%{_unitdir}/virtnwfilterd.socket
%{_unitdir}/virtnwfilterd-ro.socket
%{_unitdir}/virtnwfilterd-admin.socket
%attr(0755, root, root) %{_sbindir}/virtnwfilterd
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
%ghost %dir %{_rundir}/libvirt/network/
%ghost %dir %{_rundir}/libvirt/nwfilter-binding/
%ghost %dir %{_rundir}/libvirt/nwfilter/
%{_libdir}/libvirt/connection-driver/libvirt_driver_nwfilter.so
%{_mandir}/man8/virtnwfilterd.8*
%files daemon-driver-secret
%config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf
%{_datadir}/augeas/lenses/virtsecretd.aug
%{_datadir}/augeas/lenses/tests/test_virtsecretd.aug
%{_unitdir}/virtsecretd.service
%{_unitdir}/virtsecretd.socket
%{_unitdir}/virtsecretd-ro.socket
%{_unitdir}/virtsecretd-admin.socket
%attr(0755, root, root) %{_sbindir}/virtsecretd
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/secrets/
%ghost %dir %{_rundir}/libvirt/secrets/
%{_libdir}/libvirt/connection-driver/libvirt_driver_secret.so
%{_mandir}/man8/virtsecretd.8*
%files daemon-driver-storage
%files daemon-driver-storage-core
%config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf
%{_datadir}/augeas/lenses/virtstoraged.aug
%{_datadir}/augeas/lenses/tests/test_virtstoraged.aug
%{_unitdir}/virtstoraged.service
%{_unitdir}/virtstoraged.socket
%{_unitdir}/virtstoraged-ro.socket
%{_unitdir}/virtstoraged-admin.socket
%attr(0755, root, root) %{_sbindir}/virtstoraged
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/storage/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/storage/autostart/
%ghost %dir %{_rundir}/libvirt/storage/
%{_libdir}/libvirt/connection-driver/libvirt_driver_storage.so
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_fs.so
%{_libdir}/libvirt/storage-file/libvirt_storage_file_fs.so
%{_mandir}/man8/virtstoraged.8*
%files daemon-driver-storage-disk
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_disk.so
%files daemon-driver-storage-logical
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_logical.so
%files daemon-driver-storage-scsi
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_scsi.so
%files daemon-driver-storage-iscsi
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_iscsi.so
%if %{with_storage_iscsi_direct}
%files daemon-driver-storage-iscsi-direct
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_iscsi-direct.so
%endif
%files daemon-driver-storage-mpath
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_mpath.so
%if %{with_storage_gluster}
%files daemon-driver-storage-gluster
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_gluster.so
%{_libdir}/libvirt/storage-file/libvirt_storage_file_gluster.so
%endif
%if %{with_storage_rbd}
%files daemon-driver-storage-rbd
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_rbd.so
%endif
%if %{with_storage_zfs}
%files daemon-driver-storage-zfs
%{_libdir}/libvirt/storage-backend/libvirt_storage_backend_zfs.so
%endif
%if %{with_qemu}
%files daemon-driver-qemu
%config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf
%if %{with_userfaultfd_sysctl}
%config(noreplace) %{_prefix}/lib/sysctl.d/60-qemu-postcopy-migration.conf
%endif
%{_datadir}/augeas/lenses/virtqemud.aug
%{_datadir}/augeas/lenses/tests/test_virtqemud.aug
%{_unitdir}/virtqemud.service
%{_unitdir}/virtqemud.socket
%{_unitdir}/virtqemud-ro.socket
%{_unitdir}/virtqemud-admin.socket
%attr(0755, root, root) %{_sbindir}/virtqemud
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/autostart/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
%ghost %dir %{_rundir}/libvirt/qemu/
%ghost %dir %{_rundir}/libvirt/qemu/dbus/
%ghost %dir %{_rundir}/libvirt/qemu/passt/
%ghost %dir %{_rundir}/libvirt/qemu/slirp/
%ghost %dir %{_rundir}/libvirt/qemu/swtpm/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/checkpoint/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/dump/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/nvram/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ram/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/save/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/snapshot/
%dir %attr(0750, root, root) %{_localstatedir}/cache/libvirt/qemu/
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%{_libdir}/libvirt/connection-driver/libvirt_driver_qemu.so
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/
%dir %attr(0730, tss, tss) %{_localstatedir}/log/swtpm/libvirt/qemu/
%{_bindir}/virt-qemu-run
%{_mandir}/man1/virt-qemu-run.1*
%{_mandir}/man8/virtqemud.8*
%{_sysusersdir}/libvirt-qemu.conf
%endif
%if %{with_lxc}
%files daemon-driver-lxc
%config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf
%{_datadir}/augeas/lenses/virtlxcd.aug
%{_datadir}/augeas/lenses/tests/test_virtlxcd.aug
%{_unitdir}/virtlxcd.service
%{_unitdir}/virtlxcd.socket
%{_unitdir}/virtlxcd-ro.socket
%{_unitdir}/virtlxcd-admin.socket
%attr(0755, root, root) %{_sbindir}/virtlxcd
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/lxc/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/lxc/autostart/
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
%ghost %dir %{_rundir}/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
%{_datadir}/augeas/lenses/libvirtd_lxc.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
%{_libdir}/libvirt/connection-driver/libvirt_driver_lxc.so
%{_mandir}/man8/virtlxcd.8*
%endif
%if %{with_libxl}
%files daemon-driver-libxl
%config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf
%{_datadir}/augeas/lenses/virtxend.aug
%{_datadir}/augeas/lenses/tests/test_virtxend.aug
%{_unitdir}/virtxend.service
%{_unitdir}/virtxend.socket
%{_unitdir}/virtxend-ro.socket
%{_unitdir}/virtxend-admin.socket
%attr(0755, root, root) %{_sbindir}/virtxend
%config(noreplace) %{_sysconfdir}/libvirt/libxl.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl
%config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/libxl/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/libxl/autostart/
%{_datadir}/augeas/lenses/libvirtd_libxl.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
%ghost %dir %{_rundir}/libvirt/libxl/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/channel/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/channel/target/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/dump/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/save/
%{_libdir}/libvirt/connection-driver/libvirt_driver_libxl.so
%{_mandir}/man8/virtxend.8*
%endif
%if %{with_vbox}
%files daemon-driver-vbox
%config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf
%{_datadir}/augeas/lenses/virtvboxd.aug
%{_datadir}/augeas/lenses/tests/test_virtvboxd.aug
%{_unitdir}/virtvboxd.service
%{_unitdir}/virtvboxd.socket
%{_unitdir}/virtvboxd-ro.socket
%{_unitdir}/virtvboxd-admin.socket
%attr(0755, root, root) %{_sbindir}/virtvboxd
%{_libdir}/libvirt/connection-driver/libvirt_driver_vbox.so
%{_mandir}/man8/virtvboxd.8*
%endif
%if %{with_qemu_tcg}
%files daemon-qemu
%endif
%if %{with_qemu_kvm}
%files daemon-kvm
%endif
%if %{with_lxc}
%files daemon-lxc
%endif
%if %{with_libxl}
%files daemon-xen
%endif
%if %{with_vbox}
%files daemon-vbox
%endif
%if %{with_sanlock}
%files daemon-plugin-sanlock
%if %{with_qemu}
%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
%endif
%if %{with_libxl}
%config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf
%endif
%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
%{_datadir}/augeas/lenses/libvirt_sanlock.aug
%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
%dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock
%{_sbindir}/virt-sanlock-cleanup
%{_mandir}/man8/virt-sanlock-cleanup.8*
%attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
%endif
%files client
%{_mandir}/man1/virsh.1*
%{_mandir}/man1/virt-xml-validate.1*
%{_mandir}/man1/virt-pki-query-dn.1*
%{_mandir}/man1/virt-pki-validate.1*
%{_mandir}/man7/virkey*.7*
%{_bindir}/virsh
%{_bindir}/virt-xml-validate
%{_bindir}/virt-pki-query-dn
%{_bindir}/virt-pki-validate
%{_datadir}/bash-completion/completions/virsh
%if %{with_qemu}
%files client-qemu
%{_mandir}/man1/virt-qemu-qmp-proxy.1*
%{_mandir}/man1/virt-qemu-sev-validate.1*
%{_bindir}/virt-qemu-qmp-proxy
%{_bindir}/virt-qemu-sev-validate
%endif
%files libs -f %{name}.lang
%license COPYING COPYING.LESSER
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
%config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf
%{_libdir}/libvirt.so.*
%{_libdir}/libvirt-qemu.so.*
%{_libdir}/libvirt-lxc.so.*
%{_libdir}/libvirt-admin.so.*
%dir %{_datadir}/libvirt/
%dir %{_datadir}/libvirt/schemas/
%{_datadir}/systemtap/tapset/libvirt_probes*.stp
%{_datadir}/systemtap/tapset/libvirt_functions.stp
%if %{with_qemu}
%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
%endif
%{_datadir}/libvirt/schemas/*.rng
%{_datadir}/libvirt/cpu_map/*.xml
%{_datadir}/libvirt/test-screenshot.png
%if %{with_wireshark}
%files wireshark
%{wireshark_plugindir}/libvirt.so
%endif
%files nss
%{_libdir}/libnss_libvirt.so.2
%{_libdir}/libnss_libvirt_guest.so.2
%files ssh-proxy
%config(noreplace) %{_sysconfdir}/ssh/ssh_config.d/30-libvirt-ssh-proxy.conf
%{_libexecdir}/libvirt-ssh-proxy
%if %{with_lxc}
%files login-shell
%attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
%{_libexecdir}/virt-login-shell-helper
%config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
%{_mandir}/man1/virt-login-shell.1*
%endif
%files devel
%{_libdir}/libvirt.so
%{_libdir}/libvirt-admin.so
%{_libdir}/libvirt-qemu.so
%{_libdir}/libvirt-lxc.so
%dir %{_includedir}/libvirt
%{_includedir}/libvirt/virterror.h
%{_includedir}/libvirt/libvirt.h
%{_includedir}/libvirt/libvirt-admin.h
%{_includedir}/libvirt/libvirt-common.h
%{_includedir}/libvirt/libvirt-domain.h
%{_includedir}/libvirt/libvirt-domain-checkpoint.h
%{_includedir}/libvirt/libvirt-domain-snapshot.h
%{_includedir}/libvirt/libvirt-event.h
%{_includedir}/libvirt/libvirt-host.h
%{_includedir}/libvirt/libvirt-interface.h
%{_includedir}/libvirt/libvirt-network.h
%{_includedir}/libvirt/libvirt-nodedev.h
%{_includedir}/libvirt/libvirt-nwfilter.h
%{_includedir}/libvirt/libvirt-secret.h
%{_includedir}/libvirt/libvirt-storage.h
%{_includedir}/libvirt/libvirt-stream.h
%{_includedir}/libvirt/libvirt-qemu.h
%{_includedir}/libvirt/libvirt-lxc.h
%{_libdir}/pkgconfig/libvirt.pc
%{_libdir}/pkgconfig/libvirt-admin.pc
%{_libdir}/pkgconfig/libvirt-qemu.pc
%{_libdir}/pkgconfig/libvirt-lxc.pc
%dir %{_datadir}/libvirt/api/
%{_datadir}/libvirt/api/libvirt-api.xml
%{_datadir}/libvirt/api/libvirt-admin-api.xml
%{_datadir}/libvirt/api/libvirt-qemu-api.xml
%{_datadir}/libvirt/api/libvirt-lxc-api.xml
%endif
%if %{with_mingw32}
%files -n mingw32-libvirt -f mingw32-libvirt.lang
%dir %{mingw32_sysconfdir}/libvirt/
%config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt.conf
%config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt-admin.conf
%{mingw32_bindir}/libvirt-0.dll
%{mingw32_bindir}/virsh.exe
%{mingw32_bindir}/virt-admin.exe
%{mingw32_bindir}/virt-xml-validate
%{mingw32_bindir}/virt-pki-query-dn.exe
%{mingw32_bindir}/virt-pki-validate.exe
%{mingw32_bindir}/libvirt-lxc-0.dll
%{mingw32_bindir}/libvirt-qemu-0.dll
%{mingw32_bindir}/libvirt-admin-0.dll
%{mingw32_libdir}/libvirt.dll.a
%{mingw32_libdir}/pkgconfig/libvirt.pc
%{mingw32_libdir}/pkgconfig/libvirt-qemu.pc
%{mingw32_libdir}/pkgconfig/libvirt-lxc.pc
%{mingw32_libdir}/pkgconfig/libvirt-admin.pc
%{mingw32_libdir}/libvirt-lxc.dll.a
%{mingw32_libdir}/libvirt-qemu.dll.a
%{mingw32_libdir}/libvirt-admin.dll.a
%dir %{mingw32_datadir}/libvirt/
%dir %{mingw32_datadir}/libvirt/schemas/
%{mingw32_datadir}/libvirt/schemas/*.rng
%dir %{mingw32_datadir}/libvirt/api/
%{mingw32_datadir}/libvirt/api/libvirt-api.xml
%{mingw32_datadir}/libvirt/api/libvirt-lxc-api.xml
%{mingw32_datadir}/libvirt/api/libvirt-qemu-api.xml
%{mingw32_datadir}/libvirt/api/libvirt-admin-api.xml
%{mingw32_datadir}/libvirt/cpu_map/*.xml
%{mingw32_datadir}/libvirt/test-screenshot.png
%dir %{mingw32_includedir}/libvirt
%{mingw32_includedir}/libvirt/libvirt.h
%{mingw32_includedir}/libvirt/libvirt-common.h
%{mingw32_includedir}/libvirt/libvirt-domain.h
%{mingw32_includedir}/libvirt/libvirt-domain-checkpoint.h
%{mingw32_includedir}/libvirt/libvirt-domain-snapshot.h
%{mingw32_includedir}/libvirt/libvirt-event.h
%{mingw32_includedir}/libvirt/libvirt-host.h
%{mingw32_includedir}/libvirt/libvirt-interface.h
%{mingw32_includedir}/libvirt/libvirt-network.h
%{mingw32_includedir}/libvirt/libvirt-nodedev.h
%{mingw32_includedir}/libvirt/libvirt-nwfilter.h
%{mingw32_includedir}/libvirt/libvirt-secret.h
%{mingw32_includedir}/libvirt/libvirt-storage.h
%{mingw32_includedir}/libvirt/libvirt-stream.h
%{mingw32_includedir}/libvirt/virterror.h
%{mingw32_includedir}/libvirt/libvirt-lxc.h
%{mingw32_includedir}/libvirt/libvirt-qemu.h
%{mingw32_includedir}/libvirt/libvirt-admin.h
%{mingw32_mandir}/man1/virsh.1*
%{mingw32_mandir}/man1/virt-admin.1*
%{mingw32_mandir}/man1/virt-xml-validate.1*
%{mingw32_mandir}/man1/virt-pki-query-dn.1*
%{mingw32_mandir}/man1/virt-pki-validate.1*
%{mingw32_mandir}/man7/virkey*.7*
%endif
%if %{with_mingw64}
%files -n mingw64-libvirt -f mingw64-libvirt.lang
%dir %{mingw64_sysconfdir}/libvirt/
%config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt.conf
%config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt-admin.conf
%{mingw64_bindir}/libvirt-0.dll
%{mingw64_bindir}/virsh.exe
%{mingw64_bindir}/virt-admin.exe
%{mingw64_bindir}/virt-xml-validate
%{mingw64_bindir}/virt-pki-query-dn.exe
%{mingw64_bindir}/virt-pki-validate.exe
%{mingw64_bindir}/libvirt-lxc-0.dll
%{mingw64_bindir}/libvirt-qemu-0.dll
%{mingw64_bindir}/libvirt-admin-0.dll
%{mingw64_libdir}/libvirt.dll.a
%{mingw64_libdir}/pkgconfig/libvirt.pc
%{mingw64_libdir}/pkgconfig/libvirt-qemu.pc
%{mingw64_libdir}/pkgconfig/libvirt-lxc.pc
%{mingw64_libdir}/pkgconfig/libvirt-admin.pc
%{mingw64_libdir}/libvirt-lxc.dll.a
%{mingw64_libdir}/libvirt-qemu.dll.a
%{mingw64_libdir}/libvirt-admin.dll.a
%dir %{mingw64_datadir}/libvirt/
%dir %{mingw64_datadir}/libvirt/schemas/
%{mingw64_datadir}/libvirt/schemas/*.rng
%dir %{mingw64_datadir}/libvirt/api/
%{mingw64_datadir}/libvirt/api/libvirt-api.xml
%{mingw64_datadir}/libvirt/api/libvirt-lxc-api.xml
%{mingw64_datadir}/libvirt/api/libvirt-qemu-api.xml
%{mingw64_datadir}/libvirt/api/libvirt-admin-api.xml
%{mingw64_datadir}/libvirt/cpu_map/*.xml
%{mingw64_datadir}/libvirt/test-screenshot.png
%dir %{mingw64_includedir}/libvirt
%{mingw64_includedir}/libvirt/libvirt.h
%{mingw64_includedir}/libvirt/libvirt-common.h
%{mingw64_includedir}/libvirt/libvirt-domain.h
%{mingw64_includedir}/libvirt/libvirt-domain-checkpoint.h
%{mingw64_includedir}/libvirt/libvirt-domain-snapshot.h
%{mingw64_includedir}/libvirt/libvirt-event.h
%{mingw64_includedir}/libvirt/libvirt-host.h
%{mingw64_includedir}/libvirt/libvirt-interface.h
%{mingw64_includedir}/libvirt/libvirt-network.h
%{mingw64_includedir}/libvirt/libvirt-nodedev.h
%{mingw64_includedir}/libvirt/libvirt-nwfilter.h
%{mingw64_includedir}/libvirt/libvirt-secret.h
%{mingw64_includedir}/libvirt/libvirt-storage.h
%{mingw64_includedir}/libvirt/libvirt-stream.h
%{mingw64_includedir}/libvirt/virterror.h
%{mingw64_includedir}/libvirt/libvirt-lxc.h
%{mingw64_includedir}/libvirt/libvirt-qemu.h
%{mingw64_includedir}/libvirt/libvirt-admin.h
%{mingw64_mandir}/man1/virsh.1*
%{mingw64_mandir}/man1/virt-admin.1*
%{mingw64_mandir}/man1/virt-xml-validate.1*
%{mingw64_mandir}/man1/virt-pki-query-dn.1*
%{mingw64_mandir}/man1/virt-pki-validate.1*
%{mingw64_mandir}/man7/virkey*.7*
%endif
%changelog
* Thu Jul 18 2024 Fedora Release Engineering <releng@fedoraproject.org> - 10.5.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild
* Thu Jul 4 2024 Daniel P. Berrangé <berrange@redhat.com> - 10.5.0-1
- Rebase to 10.5.0 release
* Wed Jun 5 2024 Daniel P. Berrangé <berrange@redhat.com> - 10.4.0-2
- Fix leak of GSource handle
- Fix leak of udev reference (rhbz #2266017)
* Wed Jun 5 2024 Daniel P. Berrangé <berrange@redhat.com> - 10.4.0-1
- Update to version 10.4.0
- Change virtual network backend from iptables to nftables
- Introduce SSH VSOCK proxy
* Thu May 2 2024 Daniel P. Berrangé <berrange@redhat.com> - 10.3.0-1
- Update to version 10.3.0
* Sat Apr 06 2024 Cole Robinson <crobinso@redhat.com> - 10.2.0-2
- Rebuild for new libiscsi
* Fri Apr 05 2024 Cole Robinson <crobinso@redhat.com> - 10.2.0-1
- Update to version 10.2.0
* Fri Mar 01 2024 Cole Robinson <crobinso@redhat.com> - 10.1.0-1
- Update to version 10.1.0
* Mon Feb 19 2024 Cole Robinson <crobinso@redhat.com> - 10.0.0-4
- Rebuild for wireshark soname bump
* Thu Jan 25 2024 Fedora Release Engineering <releng@fedoraproject.org> - 10.0.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 10.0.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Tue Jan 16 2024 Cole Robinson <crobinso@redhat.com> - 10.0.0-1
- Update to version 10.0.0
* Wed Jan 03 2024 Jonathan Wright <jonathan@almalinux.org> - 9.10.0-4
- conf: fix regression for default input bus
* Fri Dec 8 2023 Richard W.M. Jones <rjones@redhat.com> - 9.10.0-3
- Bump and rebuild for xen 4.18.0, third attempt
* Tue Dec 05 2023 Adam Williamson <awilliam@redhat.com> - 9.10.0-2
- Rebuild for xen 4.18.0 again
* Sat Dec 02 2023 Cole Robinson <crobinso@redhat.com> - 9.10.0-1
- Update to version 9.10.0
* Thu Nov 30 2023 Richard W.M. Jones <rjones@redhat.com> - 9.9.0-3
- Bump and rebuild for xen 4.18.0
* Mon Nov 06 2023 Cole Robinson <crobinso@redhat.com> - 9.9.0-2
- Fix crash with snapshot restore (bz #2247754)
* Wed Nov 01 2023 Cole Robinson <crobinso@redhat.com> - 9.9.0-1
- Update to version 9.9.0
* Thu Oct 05 2023 Cole Robinson <crobinso@redhat.com> - 9.8.0-1
- Update to version 9.8.0
* Fri Sep 1 2023 Daniel P. Berrangé <berrange@redhat.com> - 9.7.0-1
- Update to version 9.7.0
* Tue Aug 01 2023 Cole Robinson <crobinso@redhat.com> - 9.6.0-1
- Update to version 9.6.0
* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 9.5.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
* Wed Jul 05 2023 Cole Robinson <crobinso@redhat.com> - 9.5.0-1
- Update to version 9.5.0
* Wed Jun 28 2023 Cole Robinson <crobinso@redhat.com> - 9.4.0-1
- Update to version 9.4.0
* Tue May 23 2023 Cole Robinson <crobinso@redhat.com> - 9.3.0-2
- Drop numad usage, it is removed from f39
* Tue May 02 2023 Cole Robinson <crobinso@redhat.com> - 9.3.0-1
- Update to version 9.3.0
* Wed Apr 05 2023 Cole Robinson <crobinso@redhat.com> - 9.2.0-1
- Update to version 9.2.0
* Wed Mar 01 2023 Cole Robinson <crobinso@redhat.com> - 9.1.0-1
- Update to version 9.1.0
* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 9.0.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
* Mon Jan 16 2023 Cole Robinson <crobinso@redhat.com> - 9.0.0-1
- Update to version 9.0.0
* Tue Jan 03 2023 Richard W.M. Jones <rjones@redhat.com> - 8.10.0-2
- Rebuild for xen-4.17.0
* Sat Dec 03 2022 Cole Robinson <crobinso@redhat.com> - 8.10.0-1
- Update to version 8.10.0
* Thu Nov 03 2022 Cole Robinson <crobinso@redhat.com> - 8.9.0-1
- Update to version 8.9.0
* Mon Oct 24 2022 Cole Robinson <crobinso@redhat.com> - 8.8.0-2
- Rebuild for wireshark soname bump
* Tue Oct 04 2022 Cole Robinson <crobinso@redhat.com> - 8.8.0-1
- Update to version 8.8.0
* Fri Sep 9 2022 Jens Petersen <petersen@redhat.com> - 8.7.0-2
- F37 libvirt-daemon: depend on gettext-runtime instead of gettext (#2117209)
* Tue Sep 06 2022 Cole Robinson <crobinso@redhat.com> - 8.7.0-1
- Update to version 8.7.0
* Tue Aug 9 2022 Daniel P. Berrangé <berrange@redhat.com> - 8.1.0-3
- Pull in mingw sub-packages
* Thu Aug 04 2022 Cole Robinson <crobinso@redhat.com> - 8.6.0-2
- Use upstream 'glibc fix' commits
* Mon Aug 01 2022 Cole Robinson <crobinso@redhat.com> - 8.6.0-1
- Update to version 8.6.0
* Thu Jul 21 2022 Cole Robinson <crobinso@redhat.com> - 8.5.0-1
- Update to version 8.5.0
* Sat Jun 11 2022 Cole Robinson <crobinso@redhat.com> - 8.4.0-2
- Adjust for Xen dropping 32bit arches
* Thu Jun 02 2022 Cole Robinson <crobinso@redhat.com> - 8.4.0-1
- Update to version 8.4.0
* Mon May 02 2022 Cole Robinson <crobinso@redhat.com> - 8.3.0-1
- Update to version 8.3.0
* Fri Apr 01 2022 Cole Robinson <crobinso@redhat.com> - 8.2.0-1
- Update to version 8.2.0
* Thu Mar 3 2022 Daniel P. Berrangé <berrange@redhat.com> - 8.1.0-2
- Fix crash undefining VM without loader (rhbz#2060412)
* Tue Mar 01 2022 Cole Robinson <crobinso@redhat.com> - 8.1.0-1
- Update to version 8.1.0
* Tue Feb 22 2022 Richard W.M. Jones <rjones@redhat.com> - 8.0.0-3
- Include upstream patch which fixes virt-install bug.
* Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 8.0.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
* Fri Jan 14 2022 Cole Robinson <crobinso@redhat.com> - 8.0.0-1
- Update to version 8.0.0
* Tue Jan 11 2022 Richard W.M. Jones <rjones@redhat.com> - 7.10.0-2
- Bump release and rebuild for new xen
* Wed Dec 1 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.10.0-1
- Update to 7.10.0 release
* Tue Nov 2 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.9.0-1
- Update to 7.9.0 release
* Thu Oct 28 2021 Richard W.M. Jones <rjones@redhat.com> - 7.8.0-2
- Bump and rebuild for fixed glusterfs on arm (RHBZ#2018182)
* Fri Oct 1 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.8.0-1
- Update to 7.8.0 release
* Thu Sep 2 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.7.0-1
- Update to 7.7.0 release
* Tue Aug 31 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.6.0-3
- Fix repeated word in scriptlet name
- Fix deps on virtlockd/virtlogd socket units
- Fix test failure with newer QEMU
* Wed Aug 4 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.6.0-2
- Switch to use modular daemons by default
* Mon Aug 2 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.6.0-1
- Update to 7.6.0 release
* Wed Jul 28 2021 Richard W.M. Jones <rjones@redhat.com> - 7.5.0-3
- Add fix for discard + copy-on-read affecting virt-v2v (RHBZ#1986509)
* Thu Jul 22 2021 Fedora Release Engineering <releng@fedoraproject.org> - 7.5.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
* Thu Jul 01 2021 Cole Robinson <crobinso@redhat.com> - 7.5.0-1
- Update to version 7.5.0
* Mon Jun 07 2021 Cole Robinson <crobinso@redhat.com> - 7.4.0-2
- Rebuild for xen 4.14
* Tue Jun 01 2021 Cole Robinson <crobinso@redhat.com> - 7.4.0-1
- Update to version 7.4.0
* Tue May 4 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.3.0-1
- Update to 7.3.0 release
- Remove libvirt-admin & libvirt-bash-completion subpackages
* Mon Apr 05 2021 Cole Robinson <crobinso@redhat.com> - 7.2.0-1
- Update to version 7.2.0
* Tue Mar 9 2021 Richard W.M. Jones <rjones@redhat.com> - 7.1.0-2
- Bump and rebuild for libwsman_client.so.4 -> .5
* Mon Mar 01 2021 Cole Robinson <crobinso@redhat.com> - 7.1.0-1
- Update to version 7.1.0
* Wed Feb 03 2021 Cole Robinson <aintdiscole@gmail.com> - 7.0.0-4
- Increase meson test timeout to fix builds on s390x copr
* Tue Feb 02 2021 Laine Stump <laine@redhat.com> - 7.0.0-3
- disable netcf in build
* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 7.0.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Fri Jan 15 2021 Daniel P. Berrangé <berrange@redhat.com> - 7.0.0-1
- Rebase to 7.0.0 release