rcolebaugh / rpms / openssh

Forked from rpms/openssh 2 years ago
Clone
Blob Blame History Raw
diff -up openssh-8.2p1/ssh_config.5.crypto-policies openssh-8.2p1/ssh_config.5
--- openssh-8.2p1/ssh_config.5.crypto-policies	2020-03-26 14:40:44.546775605 +0100
+++ openssh-8.2p1/ssh_config.5	2020-03-26 14:52:20.700649727 +0100
@@ -359,14 +359,13 @@ or
 .Qq *.c.example.com
 domains.
 .It Cm CASignatureAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies which algorithms are allowed for signing of certificates
 by certificate authorities (CAs).
-The default is:
-.Bd -literal -offset indent
-ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,
-ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
-.Pp
 .Xr ssh 1
 will not accept host certificates signed using algorithms other than those
 specified.
@@ -424,20 +424,25 @@ If the option is set to
 (the default),
 the check will not be executed.
 .It Cm Ciphers
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the ciphers allowed and their order of preference.
 Multiple ciphers must be comma-separated.
 If the specified list begins with a
 .Sq +
-character, then the specified ciphers will be appended to the default set
-instead of replacing them.
+character, then the specified ciphers will be appended to the built-in
+openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq -
 character, then the specified ciphers (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified ciphers will be placed at the head of the
-default set.
+built-in openssh default set.
 .Pp
 The supported ciphers are:
 .Bd -literal -offset indent
@@ -453,13 +458,6 @@ aes256-gcm@openssh.com
 chacha20-poly1305@openssh.com
 .Ed
 .Pp
-The default is:
-.Bd -literal -offset indent
-chacha20-poly1305@openssh.com,
-aes128-ctr,aes192-ctr,aes256-ctr,
-aes128-gcm@openssh.com,aes256-gcm@openssh.com
-.Ed
-.Pp
 The list of available ciphers may also be obtained using
 .Qq ssh -Q cipher .
 .It Cm ClearAllForwardings
@@ -812,6 +810,11 @@ command line will be passed untouched to
 The default is
 .Dq no .
 .It Cm GSSAPIKexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 The list of key exchange algorithms that are offered for GSSAPI
 key exchange. Possible values are
 .Bd -literal -offset 3n
@@ -824,10 +827,8 @@ gss-nistp256-sha256-,
 gss-curve25519-sha256-
 .Ed
 .Pp
-The default is
-.Dq gss-group14-sha256-,gss-group16-sha512-,gss-nistp256-sha256-,
-gss-curve25519-sha256-,gss-group14-sha1-,gss-gex-sha1- .
 This option only applies to connections using GSSAPI.
+.Pp
 .It Cm HashKnownHosts
 Indicates that
 .Xr ssh 1
@@ -1149,29 +1150,25 @@ it may be zero or more of:
 and
 .Cm pam .
 .It Cm KexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the available KEX (Key Exchange) algorithms.
 Multiple algorithms must be comma-separated.
 If the specified list begins with a
 .Sq +
-character, then the specified methods will be appended to the default set
-instead of replacing them.
+character, then the specified methods will be appended to the built-in
+openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq -
 character, then the specified methods (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified methods will be placed at the head of the
-default set.
-The default is:
-.Bd -literal -offset indent
-curve25519-sha256,curve25519-sha256@libssh.org,
-ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
-diffie-hellman-group-exchange-sha256,
-diffie-hellman-group16-sha512,
-diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256
-.Ed
+built-in openssh default set.
 .Pp
 The list of available key exchange algorithms may also be obtained using
 .Qq ssh -Q kex .
@@ -1231,37 +1228,33 @@ The default is INFO.
 file.
 This option is intended for debugging and no overrides are enabled by default.
 .It Cm MACs
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the MAC (message authentication code) algorithms
 in order of preference.
 The MAC algorithm is used for data integrity protection.
 Multiple algorithms must be comma-separated.
 If the specified list begins with a
 .Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified algorithms will be appended to the built-in
+openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq -
 character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified algorithms will be placed at the head of the
-default set.
+built-in openssh default set.
 .Pp
 The algorithms that contain
 .Qq -etm
 calculate the MAC after encryption (encrypt-then-mac).
 These are considered safer and their use recommended.
 .Pp
-The default is:
-.Bd -literal -offset indent
-umac-64-etm@openssh.com,umac-128-etm@openssh.com,
-hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
-hmac-sha1-etm@openssh.com,
-umac-64@openssh.com,umac-128@openssh.com,
-hmac-sha2-256,hmac-sha2-512,hmac-sha1
-.Ed
-.Pp
 The list of available MAC algorithms may also be obtained using
 .Qq ssh -Q mac .
 .It Cm NoHostAuthenticationForLocalhost
@@ -1394,37 +1387,25 @@ instead of continuing to execute and pas
 The default is
 .Cm no .
 .It Cm PubkeyAcceptedAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the signature algorithms that will be used for public key
 authentication as a comma-separated list of patterns.
 If the specified list begins with a
 .Sq +
-character, then the algorithms after it will be appended to the default
-instead of replacing it.
+character, then the algorithms after it will be appended to the built-in
+openssh default instead of replacing it.
 If the specified list begins with a
 .Sq -
 character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified algorithms will be placed at the head of the
-default set.
-The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-rsa-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
+built-in openssh default set.
 .Pp
 The list of available signature algorithms may also be obtained using
 .Qq ssh -Q PubkeyAcceptedAlgorithms .
diff -up openssh-8.2p1/sshd_config.5.crypto-policies openssh-8.2p1/sshd_config.5
--- openssh-8.2p1/sshd_config.5.crypto-policies	2020-03-26 14:40:44.530775355 +0100
+++ openssh-8.2p1/sshd_config.5	2020-03-26 14:48:56.732468099 +0100
@@ -375,14 +375,13 @@ If the argument is
 then no banner is displayed.
 By default, no banner is displayed.
 .It Cm CASignatureAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies which algorithms are allowed for signing of certificates
 by certificate authorities (CAs).
-The default is:
-.Bd -literal -offset indent
-ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,
-ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
-.Pp
 Certificates signed using other algorithms will not be accepted for
 public key or host-based authentication.
 .It Cm ChallengeResponseAuthentication
@@ -446,20 +446,25 @@ The default is
 indicating not to
 .Xr chroot 2 .
 .It Cm Ciphers
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the ciphers allowed.
 Multiple ciphers must be comma-separated.
 If the specified list begins with a
 .Sq +
-character, then the specified ciphers will be appended to the default set
-instead of replacing them.
+character, then the specified ciphers will be appended to the built-in
+openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq -
 character, then the specified ciphers (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified ciphers will be placed at the head of the
-default set.
+built-in openssh default set.
 .Pp
 The supported ciphers are:
 .Pp
@@ -486,13 +491,6 @@ aes256-gcm@openssh.com
 chacha20-poly1305@openssh.com
 .El
 .Pp
-The default is:
-.Bd -literal -offset indent
-chacha20-poly1305@openssh.com,
-aes128-ctr,aes192-ctr,aes256-ctr,
-aes128-gcm@openssh.com,aes256-gcm@openssh.com
-.Ed
-.Pp
 The list of available ciphers may also be obtained using
 .Qq ssh -Q cipher .
 .It Cm ClientAliveCountMax
@@ -681,21 +679,22 @@ For this to work
 .Cm GSSAPIKeyExchange
 needs to be enabled in the server and also used by the client.
 .It Cm GSSAPIKexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 The list of key exchange algorithms that are accepted by GSSAPI
 key exchange. Possible values are
 .Bd -literal -offset 3n
-gss-gex-sha1-,
-gss-group1-sha1-,
-gss-group14-sha1-,
-gss-group14-sha256-,
-gss-group16-sha512-,
-gss-nistp256-sha256-,
+gss-gex-sha1-
+gss-group1-sha1-
+gss-group14-sha1-
+gss-group14-sha256-
+gss-group16-sha512-
+gss-nistp256-sha256-
 gss-curve25519-sha256-
 .Ed
-.Pp
-The default is
-.Dq gss-group14-sha256-,gss-group16-sha512-,gss-nistp256-sha256-,
-gss-curve25519-sha256-,gss-group14-sha1-,gss-gex-sha1- .
 This option only applies to connections using GSSAPI.
 .It Cm HostbasedAcceptedAlgorithms
 Specifies the signature algorithms that will be accepted for hostbased
@@ -793,26 +793,13 @@ is specified, the location of the socket
 .Ev SSH_AUTH_SOCK
 environment variable.
 .It Cm HostKeyAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the host key signature algorithms
 that the server offers.
-The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-rsa-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
-.Pp
 The list of available signature algorithms may also be obtained using
 .Qq ssh -Q HostKeyAlgorithms .
 .It Cm IgnoreRhosts
@@ -943,20 +931,25 @@ Specifies whether to look at .k5login fi
 The default is
 .Cm yes .
 .It Cm KexAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the available KEX (Key Exchange) algorithms.
 Multiple algorithms must be comma-separated.
 Alternately if the specified list begins with a
 .Sq +
-character, then the specified methods will be appended to the default set
-instead of replacing them.
+character, then the specified methods will be appended to the built-in
+openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq -
 character, then the specified methods (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified methods will be placed at the head of the
-default set.
+built-in openssh default set.
 The supported algorithms are:
 .Pp
 .Bl -item -compact -offset indent
@@ -988,15 +981,6 @@ ecdh-sha2-nistp521
 sntrup761x25519-sha512@openssh.com
 .El
 .Pp
-The default is:
-.Bd -literal -offset indent
-curve25519-sha256,curve25519-sha256@libssh.org,
-ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
-diffie-hellman-group-exchange-sha256,
-diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256
-.Ed
-.Pp
 The list of available key exchange algorithms may also be obtained using
 .Qq ssh -Q KexAlgorithms .
 .It Cm ListenAddress
@@ -1065,21 +1049,26 @@ DEBUG and DEBUG1 are equivalent.
 file.
 This option is intended for debugging and no overrides are enabled by default.
 .It Cm MACs
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the available MAC (message authentication code) algorithms.
 The MAC algorithm is used for data integrity protection.
 Multiple algorithms must be comma-separated.
 If the specified list begins with a
 .Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified algorithms will be appended to the built-in
+openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq -
 character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified algorithms will be placed at the head of the
-default set.
+built-in openssh default set.
 .Pp
 The algorithms that contain
 .Qq -etm
@@ -1122,15 +1111,6 @@ umac-64-etm@openssh.com
 umac-128-etm@openssh.com
 .El
 .Pp
-The default is:
-.Bd -literal -offset indent
-umac-64-etm@openssh.com,umac-128-etm@openssh.com,
-hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
-hmac-sha1-etm@openssh.com,
-umac-64@openssh.com,umac-128@openssh.com,
-hmac-sha2-256,hmac-sha2-512,hmac-sha1
-.Ed
-.Pp
 The list of available MAC algorithms may also be obtained using
 .Qq ssh -Q mac .
 .It Cm Match
@@ -1480,37 +1460,25 @@ or equivalent.)
 The default is
 .Cm yes .
 .It Cm PubkeyAcceptedAlgorithms
+The default is handled system-wide by
+.Xr crypto-policies 7 .
+To see the defaults and how to modify this default, see manual page
+.Xr update-crypto-policies 8 .
+.Pp
 Specifies the signature algorithms that will be accepted for public key
 authentication as a list of comma-separated patterns.
 Alternately if the specified list begins with a
 .Sq +
-character, then the specified algorithms will be appended to the default set
-instead of replacing them.
+character, then the specified algorithms will be appended to the built-in
+openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq -
 character, then the specified algorithms (including wildcards) will be removed
-from the default set instead of replacing them.
+from the built-in openssh default set instead of replacing them.
 If the specified list begins with a
 .Sq ^
 character, then the specified algorithms will be placed at the head of the
-default set.
-The default for this option is:
-.Bd -literal -offset 3n
-ssh-ed25519-cert-v01@openssh.com,
-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-ecdsa-sha2-nistp384-cert-v01@openssh.com,
-ecdsa-sha2-nistp521-cert-v01@openssh.com,
-sk-ssh-ed25519-cert-v01@openssh.com,
-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
-rsa-sha2-512-cert-v01@openssh.com,
-rsa-sha2-256-cert-v01@openssh.com,
-ssh-rsa-cert-v01@openssh.com,
-ssh-ed25519,
-ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
-sk-ssh-ed25519@openssh.com,
-sk-ecdsa-sha2-nistp256@openssh.com,
-rsa-sha2-512,rsa-sha2-256,ssh-rsa
-.Ed
+built-in openssh default set.
 .Pp
 The list of available signature algorithms may also be obtained using
 .Qq ssh -Q PubkeyAcceptedAlgorithms .