rcolebaugh / rpms / openssh

Forked from rpms/openssh 2 years ago
Clone
Blob Blame History Raw
diff -up openssh-7.7p1/ssh_config.redhat openssh-7.7p1/ssh_config
--- openssh-7.7p1/ssh_config.redhat	2018-04-02 07:38:28.000000000 +0200
+++ openssh-7.7p1/ssh_config	2018-07-03 10:44:06.522245125 +0200
@@ -44,3 +44,8 @@
 #   VisualHostKey no
 #   ProxyCommand ssh -q -W %h:%p gateway.example.com
 #   RekeyLimit 1G 1h
+#
+# This system is following system-wide crypto policy.
+# To modify the system-wide ssh configuration, create a  *.conf  file under
+#  /etc/ssh/ssh_config.d/  which will be automatically included below
+Include /etc/ssh/ssh_config.d/*.conf
diff -up openssh-7.7p1/ssh_config_redhat.redhat openssh-7.7p1/ssh_config_redhat
--- openssh-7.7p1/ssh_config_redhat.redhat	2018-07-03 10:44:06.522245125 +0200
+++ openssh-7.7p1/ssh_config_redhat	2018-07-03 10:44:06.522245125 +0200
@@ -0,0 +1,21 @@
+# The options here are in the "Match final block" to be applied as the last
+# options and could be potentially overwritten by the user configuration
+Match final all
+	# Follow system-wide Crypto Policy, if defined:
+	Include /etc/crypto-policies/back-ends/openssh.config
+
+	GSSAPIAuthentication yes
+
+# If this option is set to yes then remote X11 clients will have full access
+# to the original X11 display. As virtually no X11 client supports the untrusted
+# mode correctly we set this to yes.
+	ForwardX11Trusted yes
+
+# Send locale-related environment variables
+	SendEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+	SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+	SendEnv LC_IDENTIFICATION LC_ALL LANGUAGE
+	SendEnv XMODIFIERS
+
+# Uncomment this if you want to use .local domain
+# Host *.local
+#   CheckHostIP no
diff -up openssh-7.7p1/sshd_config.0.redhat openssh-7.7p1/sshd_config.0
--- openssh-7.7p1/sshd_config.0.redhat	2018-04-02 07:39:27.000000000 +0200
+++ openssh-7.7p1/sshd_config.0	2018-07-03 10:44:06.523245133 +0200
@@ -872,9 +872,9 @@ DESCRIPTION
 
      SyslogFacility
              Gives the facility code that is used when logging messages from
-             sshd(8).  The possible values are: DAEMON, USER, AUTH, LOCAL0,
-             LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7.  The
-             default is AUTH.
+             sshd(8).  The possible values are: DAEMON, USER, AUTH, AUTHPRIV,
+             LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7.
+             The default is AUTH.
 
      TCPKeepAlive
              Specifies whether the system should send TCP keepalive messages
diff -up openssh-7.7p1/sshd_config.5.redhat openssh-7.7p1/sshd_config.5
--- openssh-7.7p1/sshd_config.5.redhat	2018-04-02 07:38:28.000000000 +0200
+++ openssh-7.7p1/sshd_config.5	2018-07-03 10:44:06.523245133 +0200
@@ -1461,7 +1461,7 @@ By default no subsystems are defined.
 .It Cm SyslogFacility
 Gives the facility code that is used when logging messages from
 .Xr sshd 8 .
-The possible values are: DAEMON, USER, AUTH, LOCAL0, LOCAL1, LOCAL2,
+The possible values are: DAEMON, USER, AUTH, AUTHPRIV, LOCAL0, LOCAL1, LOCAL2,
 LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7.
 The default is AUTH.
 .It Cm TCPKeepAlive
diff -up openssh-7.7p1/sshd_config.redhat openssh-7.7p1/sshd_config
--- openssh-7.7p1/sshd_config.redhat	2018-04-02 07:38:28.000000000 +0200
+++ openssh-7.7p1/sshd_config	2018-07-03 10:45:16.950782466 +0200
@@ -10,20 +10,31 @@
 # possible, but leave them commented.  Uncommented options override the
 # default value.
 
+# If you want to change the port on a SELinux system, you have to tell
+# SELinux about this change.
+# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
+#
 #Port 22
 #AddressFamily any
 #ListenAddress 0.0.0.0
 #ListenAddress ::
 
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_ecdsa_key
-#HostKey /etc/ssh/ssh_host_ed25519_key
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_ecdsa_key
+HostKey /etc/ssh/ssh_host_ed25519_key
 
 # Ciphers and keying
 #RekeyLimit default none
 
+# This system is following system-wide crypto policy. The changes to
+# crypto properties (Ciphers, MACs, ...) will not have any effect here.
+# They will be overridden by command-line options passed to the server
+# on command line.
+# Please, check manual pages for update-crypto-policies(8) and sshd_config(5).
+
 # Logging
 #SyslogFacility AUTH
+SyslogFacility AUTHPRIV
 #LogLevel INFO
 
 # Authentication:
@@ -56,9 +70,11 @@ AuthorizedKeysFile	.ssh/authorized_keys
 # To disable tunneled clear text passwords, change to no here!
 #PasswordAuthentication yes
 #PermitEmptyPasswords no
+PasswordAuthentication yes
 
 # Change to no to disable s/key passwords
 #ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication no
 
 # Kerberos options
 #KerberosAuthentication no
@@ -67,8 +83,8 @@ AuthorizedKeysFile	.ssh/authorized_keys
 #KerberosGetAFSToken no
 
 # GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
+GSSAPIAuthentication yes
+GSSAPICleanupCredentials no
 
 # Set this to 'yes' to enable PAM authentication, account processing,
 # and session processing. If this is enabled, PAM authentication will
@@ -79,16 +95,20 @@ AuthorizedKeysFile	.ssh/authorized_keys
 # If you just want the PAM account and session checks to run without
 # PAM authentication, then enable this but set PasswordAuthentication
 # and ChallengeResponseAuthentication to 'no'.
-#UsePAM no
+UsePAM yes
 
 #AllowAgentForwarding yes
 #AllowTcpForwarding yes
 #GatewayPorts no
-#X11Forwarding no
+X11Forwarding yes
 #X11DisplayOffset 10
 #X11UseLocalhost yes
 #PermitTTY yes
-#PrintMotd yes
+
+# It is recommended to use pam_motd in /etc/pam.d/sshd instead of PrintMotd,
+# as it is more configurable and versatile than the built-in version.
+PrintMotd no
+
 #PrintLastLog yes
 #TCPKeepAlive yes
 #PermitUserEnvironment no
@@ -106,6 +126,12 @@ AuthorizedKeysFile	.ssh/authorized_keys
 # no default banner path
 #Banner none
 
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
+AcceptEnv XMODIFIERS
+
 # override default of no subsystems
 Subsystem	sftp	/usr/libexec/sftp-server