naccyde / rpms / iproute

Forked from rpms/iproute 9 months ago
Clone
Blob Blame History Raw
From 8951dc99dc6a881e95420d0591bcb374f0c373d7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda@redhat.com>
Date: Wed, 12 Aug 2015 22:04:07 +0200
Subject: [PATCH] ip-link: fix and extend documentation

 * Add `can` to list of supported link types
 * Document `addrgenmode`
 * Document `link-netnsid`
 * Document VLAN link type
 * Improve VXLAN link type documentation
    - Fix VXLAN srcport/dstport docs
    - Document `udpcsum`, `udp6zerocsumtx` and `udp6zerocsumrx`
---
 man/man8/ip-link.8.in | 96 +++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 93 insertions(+), 3 deletions(-)

diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
index 844127d..a45bc05 100644
--- a/man/man8/ip-link.8.in
+++ b/man/man8/ip-link.8.in
@@ -126,6 +126,8 @@ ip-link \- network device configuration
 .B nomaster " |"
 .br
 .B addrgenmode { eui64 | none }
+.br
+.B link-netnsid ID
 .BR " }"
 
 
@@ -259,6 +261,66 @@ the following additional arguments are supported:
 .in -8
 
 .TP
+VLAN Type Support
+For a link of type
+.I VLAN
+the following additional arguments are supported:
+
+.BI "ip link add
+.BI link " DEVICE "
+.BI name " NAME "
+.BI type " vlan "
+.R " [ "
+.BI protocol " VLAN_PROTO "
+.R " ] "
+.BI id " VLANID "
+.R " [ "
+.BR reorder_hdr " { " on " | " off " } "
+.R " ] "
+.R " [ "
+.BR gvrp " { " on " | " off " } "
+.R " ] "
+.R " [ "
+.BR mvrp " { " on " | " off " } "
+.R " ] "
+.R " [ "
+.BR loose_binding " { " on " | " off " } "
+.R " ] "
+.R " [ "
+.BI ingress-qos-map " QOS-MAP "
+.R " ] "
+.R " [ "
+.BI egress-qos-map " QOS-MAP "
+.R " ] "
+
+.in +8
+.sp
+.BI protocol " VLAN_PROTO "
+- either 802.1Q or 802.1ad.
+
+.BI id " VLANID "
+- specifies the VLAN Identifer to use. Note that numbers with a leading " 0 " or " 0x " are interpreted as octal or hexadeimal, respectively.
+
+.BR reorder_hdr " { " on " | " off " } "
+- specifies whether ethernet headers are reordered or not.
+
+.BR gvrp " { " on " | " off " } "
+- specifies whether this VLAN should be registered using GARP VLAN Registration Protocol.
+
+.BR mvrp " { " on " | " off " } "
+- specifies whether this VLAN should be registered using Multiple VLAN Registration Protocol.
+
+.BR loose_binding " { " on " | " off " } "
+- specifies whether the VLAN device state is bound to the physical device state.
+
+.BI ingress-qos-map " QOS-MAP "
+- defines a mapping between priority code points on incoming frames.  The format is FROM:TO with multiple mappings separated by spaces.
+
+.BI egress-qos-map " QOS-MAP "
+- the same as ingress-qos-map but for outgoing frames.
+.in -8
+
+.TP
 VXLAN Type Support
 For a link of type 
 .I VXLAN
@@ -277,7 +339,9 @@ the following additional arguments are supported:
 .R " ] [ "
 .BI tos " TOS "
 .R " ] [ "
-.BI port " MIN MAX "
+.BI dstport " PORT "
+.R " ] [ "
+.BI srcport " MIN MAX "
 .R " ] [ "
 .I "[no]learning "
 .R " ] [ "
@@ -289,6 +353,12 @@ the following additional arguments are supported:
 .R " ] [ "
 .I "[no]l3miss "
 .R " ] [ "
+.I "[no]udpcsum "
+.R " ] [ "
+.I "[no]udp6zerocsumtx "
+.R " ] [ "
+.I "[no]udp6zerocsumrx "
+.R " ] [ "
 .B gbp
 .R " ]"
 
@@ -329,7 +399,11 @@ parameter.
 - specifies the TOS value to use in outgoing packets.
 
 .sp
-.BI port " MIN MAX"
+.BI dstport " PORT"
+- specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.
+
+.sp
+.BI srcport " MIN MAX"
 - specifies the range of port numbers to use as UDP
 source ports to communicate to the remote VXLAN tunnel endpoint.
 
@@ -355,6 +429,18 @@ are entered into the VXLAN device forwarding database.
 - specifies if netlink IP ADDR miss notifications are generated.
 
 .sp
+.I [no]udpcsum
+- specifies if UDP checksum is filled in
+
+.sp
+.I [no]udp6zerocsumtx
+- specifies if UDP checksum is filled in
+
+.sp
+.I [no]udp6zerocsumrx
+- specifies if UDP checksum is received
+
+.sp
 .B gbp
 - enables the Group Policy extension (VXLAN-GBP).
 
@@ -577,7 +663,11 @@ unset master device of the device (release device).
 
 .TP
 .BR "addrgenmode eui64 " or " addrgenmode none"
-allow to ipv6 set address generation mode
+set IPv6 address generation mode
+
+.TP
+.BR "link-netnsid "
+set peer netnsid for a cross-netns interface
 
 .PP
 .B Warning:
-- 
1.8.3.1