Summary:	Tools for monitoring SMART capable hard disks

Name:		smartmontools

Version:	7.1

Release:	1%{?dist}

Epoch:		1

Group:		System Environment/Base

License:	GPLv2+

URL:		http://smartmontools.sourceforge.net/

Source0:	http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz

Source2:	smartmontools.sysconf

Source4:	smartdnotify

#semi-automatic update of drivedb.h

%global		UrlSource5	https://sourceforge.net/p/smartmontools/code/HEAD/tree/trunk/smartmontools/drivedb.h?format=raw

Source5:	drivedb.h

#fedora/rhel specific

Patch1:		smartmontools-5.38-defaultconf.patch

BuildRoot:	%(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)

#new rpm does not handle this (yet?)

#Requires(triggerun):	systemd-units

Requires(post):		systemd-units

Requires(preun):	systemd-units

Requires(postun):	systemd-units

BuildRequires:	readline-devel ncurses-devel automake util-linux groff gettext

BuildRequires:	libselinux-devel libcap-ng-devel

BuildRequires:	systemd-units systemd-devel

%description

The smartmontools package contains two utility programs (smartctl

and smartd) to control and monitor storage systems using the Self-

Monitoring, Analysis and Reporting Technology System (SMART) built

into most modern ATA and SCSI hard disks. In many cases, these

utilities will provide advanced warning of disk degradation and

failure.

%prep

%setup -q 

%patch1 -p1 -b .defaultconf

# update SOURCE5 on maintainer's machine prior commiting, there's no internet connection on builders

curl %{UrlSource5} -o %{SOURCE5} ||:

cp %{SOURCE5} .

%build

autoreconf -i

%configure --with-selinux --with-libcap-ng=yes --with-libsystemd --with-systemdsystemunitdir=%{_unitdir} --sysconfdir=%{_sysconfdir}/%{name}/ --with-systemdenvfile=%{_sysconfdir}/sysconfig/%{name}

%ifarch sparc64

make CXXFLAGS="$RPM_OPT_FLAGS -fPIE" LDFLAGS="-pie -Wl,-z,relro,-z,now"

%else

make CXXFLAGS="$RPM_OPT_FLAGS -fpie" LDFLAGS="-pie -Wl,-z,relro,-z,now"

%endif

%install

rm -rf $RPM_BUILD_ROOT

make DESTDIR=$RPM_BUILD_ROOT install

rm -f examplescripts/Makefile*

chmod a-x -R examplescripts/*

install -D -p -m 644 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/smartmontools

install -D -p -m 755 %{SOURCE4} $RPM_BUILD_ROOT/%{_libexecdir}/%{name}/smartdnotify

mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smartd_warning.d

rm -rf $RPM_BUILD_ROOT/etc/{rc.d,init.d}

rm -rf $RPM_BUILD_ROOT/%{_docdir}/%{name}

mkdir -p $RPM_BUILD_ROOT/%{_sharedstatedir}/%{name}

%clean

rm -rf $RPM_BUILD_ROOT

%preun

%systemd_preun smartd.service

%pre

if [ $1 = 2 ] # only during update

then

  # for Fedora 19-22

  if [ -f %{_sysconfdir}/smartd.conf -a ! -e %{_sysconfdir}/%name ]

  then

    mkdir -p %{_sysconfdir}/%{name}

    cp -p %{_sysconfdir}/smartd.conf %{_sysconfdir}/%{name}

  fi

fi

%post

%systemd_post smartd.service

%postun

%systemd_postun_with_restart smartd.service

%files

%defattr(-,root,root,-)

%doc AUTHORS ChangeLog COPYING INSTALL NEWS README

%doc TODO examplescripts smartd.conf

%dir %{_sysconfdir}/%name

%dir %{_sysconfdir}/%name/smartd_warning.d

%config(noreplace) %{_sysconfdir}/%{name}/smartd.conf

%config(noreplace) %{_sysconfdir}/%{name}/smartd_warning.sh

%config(noreplace) %{_sysconfdir}/sysconfig/smartmontools

%{_unitdir}/smartd.service

%{_sbindir}/smartd

%{_sbindir}/update-smart-drivedb

%{_sbindir}/smartctl

%{_mandir}/man?/smart*.*

%{_mandir}/man?/update-smart*.*

%{_libexecdir}/%{name}

%{_datadir}/%{name}

%{_sharedstatedir}/%{name}

%changelog

* Wed Apr 22 2020 Michal Hlavinka <mhlavink@redhat.com> - 1:7.1-1

- smartmontools updated to 7.1 (#1671154)

* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.6-3

- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild

* Tue Nov 07 2017 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 1:6.6-2

- Remove old crufty coreutils requires

* Mon Nov 06 2017 Michal Hlavinka <mhlavink@redhat.com> - 1:6.6-1

- smartmontools updated to 6.6

* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.5-5

- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild

* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.5-4

- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild

* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.5-3

- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild

* Fri Nov 11 2016 Michal Hlavinka <mhlavink@redhat.com> - 1:6.5-2

- enable location for persistence data(#1291928)

* Mon May 09 2016 Michal Hlavinka <mhlavink@redhat.com> - 1:6.5-1

- smartmontools updated to 6.5

* Fri Feb 05 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.4-4

- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild

* Tue Jun 23 2015 Michal Hlavinka <mhlavink@redhat.com> - 1:6.4-3

- it is no longer necessary to do utf-8 conversion of the AUTHORS and ChangeLog (#1228825)

* Fri Jun 19 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:6.4-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild

* Fri Jun 05 2015 Michal Hlavinka <mhlavink@redhat.com> - 1:6.4-1

- smartmontools updated to 6.4

* Sat May 02 2015 Kalev Lember <kalevlember@gmail.com> - 1:6.3-4

- Rebuilt for GCC 5 C++11 ABI change

* Wed Jan 14 2015 Michal Hlavinka <mhlavink@redhat.com> - 1:6.3-3

- do not require sendmail

* Mon Aug 18 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:6.3-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild

* Mon Aug 04 2014 Michal Hlavinka <mhlavink@redhat.com> - 1:6.3-1

- smartmontools updated to 6.3

* Thu Jul 17 2014 Michal Hlavinka <mhlavink@redhat.com> - 1:6.2-7

- update drivedb database (#954162)

* Sun Jun 08 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:6.2-6

- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild

* Thu Apr 17 2014 Michal Hlavinka <mhlavink@redhat.com> - 1:6.2-5

- require /usr/sbin/sendmail as MTA is not provided by all packages (#1048618)

* Tue Apr 15 2014 Michal Hlavinka <mhlavink@redhat.com> - 1:6.2-4

- use MTA instead of sendmail as a requirement (#1048614)

* Thu Apr 10 2014 Michal Hlavinka <mhlavink@redhat.com> - 1:6.2-3

- add mail requires (#1048614)

* Mon Sep 16 2013 Michal Hlavinka <mhlavink@redhat.com> - 1:6.2-2

- smartd service file wrong path to environment file (#998225)

* Tue Jul 30 2013 Michal Hlavinka <mhlavink@redhat.com> - 1:6.2-1

- smartmontools updated to 6.2

* Mon Jul 22 2013 Michal Hlavinka <mhlavink@redhat.com> - 1:6.1-2

- spec cleanup

* Wed Mar 20 2013 Michal Hlavinka <mhlavink@redhat.com> - 1:6.1-1

- smartmontools updated to 6.1

* Fri Feb 15 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:6.0-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild

* Thu Oct 11 2012 Michal Hlavinka <mhlavink@redhat.com> - 1:6.0-1

- smartmontools updated to 6.0

* Tue Aug 21 2012 Michal Hlavinka <mhlavink@redhat.com> - 1:5.43-3

- use new systemd rpm macros (#850316)

* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:5.43-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild

* Mon Jul 02 2012 Michal Hlavinka <mhlavink@redhat.com> - 1:5.43-1

- smartmontools updated to 5.43

* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:5.42-3

- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild

* Fri Dec 02 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.42-2

- enable smartd after installation

* Fri Oct 21 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.42-1

- smartmontools updated to 5.42

* Mon Jun 13 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.41-2

- make F-14 (sysv init) -> F-15 (systemd) transition more robust

* Fri Jun 10 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.41-1

- updated to 5.41

* Mon May 16 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-10

- fix path to notify script (#675778)

* Fri Mar 11 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-9

- fix typos in man page

* Fri Mar 04 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-8

- don't call chkconfig add, we use systemd now

* Thu Mar 03 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-7

- own %%{_datadir}/%%{name} and %%{_libexecdir}/%%{name} dirs

* Thu Feb 17 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-6

- notify users when disk is failing

* Wed Feb 09 2011 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-5

- move to systemd

* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:5.40-4

- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild

* Mon Nov 15 2010 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-3

- megaraid: Fix segfault on non-data commands (#577935)

* Tue Nov 09 2010 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-2

- don't forget to restart smartd service after update (#651211)

* Mon Oct 18 2010 Michal Hlavinka <mhlavink@redhat.com> - 1:5.40-1

- updated to 5.40 final

* Mon Sep 27 2010 Michal Hlavinka <mhlavink@redhat.com> - 1:5.39.1-2.r3169

- updated to r3169

- ddds riverdb support for new devices (#637171)

* Fri Jan 29 2010 Michal Hlavinka <mhlavink@redhat.com> - 1:5.39.1-1

- updated to 5.39.1

- Fix spin-up of SATA drive if '-n standby' is used.

* Wed Jan 20 2010 Michal Hlavinka <mhlavink@redhat.com> - 1:5.39-2

- fix DEVICESCAN -d sat

- fix directive '-l selftest'

- fix option '-q, --quietmode'

* Thu Dec 10 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.39-1

- update to 5.39

* Wed Dec 02 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.39-0.1.rc1

- update to 5.39-rc1

* Wed Nov 25 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-25.20091119svn

- spec cleanup

* Mon Nov 23 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-24.20091119svn

- move powermode option from sysconfig to smartd.conf (#539760)

* Thu Nov 19 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-23.20091119svn

- update to svn snapshot 2009-11-19

- remove upstreamed patches

* Mon Nov 02 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-22

- spec cleanup

* Mon Oct 12 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-21 

- warn about disabled mail only if capabilities are enabled

* Fri Oct 09 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-20

- fix init script for case when no action was specified

* Fri Oct 09 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-19

- make init script lsb compliant (#528016)

* Mon Oct 05 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-18

- bump release for rebuild

* Mon Oct 05 2009 Michal Hlaivnka <mhlavink@redhat.com> - 1:5.38-17

- make capabilities optional

- fix capabilities for 3ware contollers (#526626)

* Wed Aug 26 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-16

- extend capability scanning devices

* Wed Aug 26 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-15

- updated patch for lower capabilities (#517728)

- added buildrequires libcap-ng-devel

* Fri Aug 21 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-14

- drop all unnecessary capabilities (#517728)

* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:5.38-13

- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

* Thu Jun 11 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-12

- drop autogen call 

* Sat Apr 11 2009 Dennis Gilmore <dennis@ausil.us> - 1:5.38-11

- remove ExclusiveArch use -fPIE on sparc64  

- tested builds on sparcv9 sparc64 and s390x

* Mon Mar 09 2009 Michal Hlavinka <mhlavink@redhat.com> - 1:5.38-10

- cleanup for merge review

* Fri Feb 27 2009 Tom "spot" Callaway <tcallawa@redhat.com> - 1:5.38-9

- fix ExclusiveArch

* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:5.38-8

- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild

* Mon Aug 11 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-7

- fix #458549 - obsolete smartmontools-config

- change the default configuration file

* Fri Aug 08 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-6

- correct CXXFLAGS so the PIE code is produced

* Mon May 12 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-5

- remove config subpackage

* Mon May 05 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-4.1

- add libselinux-devel to BR

* Mon May 05 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-4

- fix #232218 character devices /dev/twa* for 3ware 9000 series RAID

  controllers are not created

* Thu Mar 27 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-3

- don't attempt to query DELL PERC controllers -- they'd go offline

* Tue Mar 18 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-2

- fix FD_CLOEXEC on SCSI device file descriptors not being set

* Mon Mar 10 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.38-1

- new upstream version

* Tue Feb 12 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-8.5

- rebuild (gcc-4.3)

* Tue Jan 15 2008 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-8.4

- change '-d ata' to '-d sat' in the config script for SATA drives

* Wed Dec 12 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-8.3

- fix #375791 - parameter warning for smartd in logwatch output

* Wed Oct 31 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-8.2

- rebuild (one more error in autogen.sh)

* Wed Oct 31 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-8.1

- fix build with new automake

* Wed Oct 31 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-8

- fix #359561 - typo in smartd-conf.py causes smartd to skip all disks

* Mon Oct 15 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-7.1

- improved patch for getaddrinfo

* Fri Oct 12 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-7

- replace gethostbyname with getaddrinfo

* Tue Sep 04 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-6

- fix #271741 - smartd-conf.py should allow customization of parameters

- fix #253753 - service starting by default, perhaps shouldn't

- update initscript (related #247058 - initscript review)

* Mon Aug 20 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-5

- add support for 24 disks on 3ware RAID controllers (related #252055)

- fix #245442 - add %%{arm} to smartmontools's set of build archs

- update license tag

* Thu Jun 21 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-4

- fix #241389 - smartd-conf.py pulls in a big dependency chain, so

  build a separate config package

* Tue Jun 05 2007 Tomas Smetana <tsmetana@redhat.com> - 1:5.37-3

- fix #241385 - smartmontools missing dependency on mailx

- fix #241388 - unneeded smartd-conf.py[co] installed in /usr/sbin

* Wed Mar  7 2007 Vitezslav Crhonek <vcrhonek@redhat.com> - 1:5.37-2

- re-add cloexec patch

- re-add one erased changelog entry

- compile with -fpie (instead of -fpic)

* Tue Feb 27 2007 Vitezslav Crhonek <vcrhonek@redhat.com> - 1:5.37-1

- new upstream version

* Thu Feb 22 2007 Tomas Mraz <tmraz@redhat.com> - 1:5.36-8

- enable SMART on disks when smartd-conf.py runs (fix

  by Calvin Ostrum) (#214502)

* Mon Feb 12 2007 Tomas Mraz <tmraz@redhat.com> - 1:5.36-7

- redirect service script output to null (#224566)

* Sun Feb 11 2007 Florian La Roche <laroche@redhat.com> - 1:5.36-6

- make sure the preun script does not fail

* Tue Nov  7 2006 Tomas Mraz <tmraz@redhat.com> - 1:5.36-5

- set cloexec on device descriptor so it doesn't leak to sendmail (#214182)

- fixed minor bug in initscript (#213683)

- backported SATA disk detection from upstream

* Fri Aug 18 2006 Jesse Keating <jkeating@redhat.com> - 1:5.36-3

- rebuilt with latest binutils to pick up 64K -z commonpagesize on ppc*

  (#203001)

* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1:5.36-2.1

- rebuild

* Tue Jun 27 2006 Tomas Mraz <tmraz@redhat.com> - 1:5.36-2

- kudzu is deprecated, replace it with HAL (#195752)

- moved later in the boot process so haldaemon is already running

  when drives are being detected

* Thu May 11 2006 Tomas Mraz <tmraz@redhat.com> - 1:5.36-1

- new upstream version

- included patch with support for cciss controllers (#191288)

* Tue May  2 2006 Tomas Mraz <tmraz@redhat.com> - 1:5.33-8

- regenerate smartd.conf on every startup if the config file

  is autogenerated (#190065)

* Fri Mar 24 2006 Tomas Mraz <tmraz@redhat.com> - 1:5.33-7

- add missing quotes to /etc/sysconfig/smartmontools

* Wed Mar 22 2006 Tomas Mraz <tmraz@redhat.com> - 1:5.33-6

- test SATA drives correctly

* Wed Mar 22 2006 Tomas Mraz <tmraz@redhat.com> - 1:5.33-5

- add default /etc/sysconfig/smartmontools file

- ignore errors on startup (#186130)

- test drive for SMART support before adding it to smartd.conf

* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1:5.33-4.2

- bump again for double-long bug on ppc(64)

* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1:5.33-4.1

- rebuilt for new gcc4.1 snapshot and glibc changes

* Fri Dec 16 2005 Tomas Mraz <tmraz@redhat.com> 1:5.33-4

- mail should be sent to root not root@localhost (#174252)

* Fri Nov 25 2005 Tomas Mraz <tmraz@redhat.com> 1:5.33-3

- add libata disks with -d ata if the libata version

  is new enough otherwise do not add them (#145859, #174095)

* Thu Nov  3 2005 Tomas Mraz <tmraz@redhat.com> 1:5.33-2

- Spec file cleanup by Robert Scheck <redhat@linuxnetz.de> (#170959)

- manual release numbering

- remove bogus patch of non-installed file

- only non-removable drives should be added to smartd.conf

- smartd.conf should be owned (#171498)

* Tue Oct 25 2005 Dave Jones <davej@redhat.com>

- Add comments to generated smartd.conf (#135397)

* Thu Aug 04 2005 Karsten Hopp <karsten@redhat.de>

- package all python files

* Tue Mar  1 2005 Dave Jones <davej@redhat.com>

- Rebuild for gcc4

* Wed Feb  9 2005 Dave Jones <davej@redhat.com>

- Build on PPC32 too (#147090)

* Sat Dec 18 2004 Dave Jones <davej@redhat.com>

- Initial packaging, based upon kernel-utils.