From f2048a07992c2a061761fd0ef262ca7e3cdc3246 Mon Sep 17 00:00:00 2001 From: CentOS Sources Date: Aug 06 2019 19:19:41 +0000 Subject: import skopeo-0.1.32-3.git1715c90.module+el8.0.0+2956+30df4692 --- diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..4df02f6 --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +SOURCES/skopeo-1715c90.tar.gz diff --git a/.skopeo.metadata b/.skopeo.metadata new file mode 100644 index 0000000..115d79b --- /dev/null +++ b/.skopeo.metadata @@ -0,0 +1 @@ +f258c639bda55165978c076e13bac72388e4ff14 SOURCES/skopeo-1715c90.tar.gz diff --git a/SOURCES/containers-storage.conf.5.md b/SOURCES/containers-storage.conf.5.md new file mode 100644 index 0000000..b2c71b1 --- /dev/null +++ b/SOURCES/containers-storage.conf.5.md @@ -0,0 +1,131 @@ +% storage.conf(5) Container Storage Configuration File +% Dan Walsh +% May 2017 + +# NAME +storage.conf - Syntax of Container Storage configuration file + +# DESCRIPTION +The STORAGE configuration file specifies all of the available container storage options +for tools using shared container storage, but in a TOML format that can be more easily modified +and versioned. + +# FORMAT +The [TOML format][toml] is used as the encoding of the configuration file. +Every option and subtable listed here is nested under a global "storage" table. +No bare options are used. The format of TOML can be simplified to: + + [table] + option = value + + [table.subtable1] + option = value + + [table.subtable2] + option = value + +## STORAGE TABLE + +The `storage` table supports the following options: + +**graphroot**="" + container storage graph dir (default: "/var/lib/containers/storage") + Default directory to store all writable content created by container storage programs + +**runroot**="" + container storage run dir (default: "/var/run/containers/storage") + Default directory to store all temporary writable content created by container storage programs + +**driver**="" + container storage driver (default is "overlay") + Default Copy On Write (COW) container storage driver + +### STORAGE OPTIONS TABLE + +The `storage.options` table supports the following options: + +**additionalimagestores**=[] + Paths to additional container image stores. Usually these are read/only and stored on remote network shares. + +**size**="" + Maximum size of a container image. Default is 10GB. This flag can be used to set quota + on the size of container images. + +**override_kernel_check**="" + Tell storage drivers to ignore kernel version checks. Some storage drivers assume that if a kernel is too + old, the driver is not supported. But for kernels that have had the drivers backported, this flag + allows users to override the checks + +[storage.options.thinpool] + +Storage Options for thinpool + +The `storage.options.thinpool` table supports the following options: + +**autoextend_percent**="" + +Tells the thinpool driver the amount by which the thinpool needs to be grown. This is specified in terms of % of pool size. So a value of 20 means that when threshold is hit, pool will be grown by 20% of existing pool size. (Default is 20%) + +**autoextend_threshold**="" + +Tells the driver the thinpool extension threshold in terms of percentage of pool size. For example, if threshold is 60, that means when pool is 60% full, threshold has been hit. (80% is the default) + +**basesize**="" + +Specifies the size to use when creating the base device, which limits the size of images and containers. (10g is the default) + +**blocksize**="" + +Specifies a custom blocksize to use for the thin pool. (64k is the default) + +**directlvm_device**="" + +Specifies a custom block storage device to use for the thin pool. Required if you setup devicemapper + +**directlvm_device_force**="" + +Tells driver to wipe device (directlvm_device) even if device already has a filesystem. Default is False + +**fs**="xfs" + +Specifies the filesystem type to use for the base device. (Default is xfs) + +**log_level**="" + +Sets the log level of devicemapper. + + 0: LogLevelSuppress 0 (Default) + 2: LogLevelFatal + 3: LogLevelErr + 4: LogLevelWarn + 5: LogLevelNotice + 6: LogLevelInfo + 7: LogLevelDebug + +**min_free_space**="" + +Specifies the min free space percent in a thin pool require for new device creation to succeed. Valid values are from 0% - 99%. Value 0% disables (10% is the default) + +**mkfsarg**="" + +Specifies extra mkfs arguments to be used when creating the base device. + +**mountopt**="" + +Specifies extra mount options used when mounting the thin devices. + +**use_deferred_removal**="" + +Marks device for deferred removal. If the device is in use when it driver attempts to remove it, driver will tell the kernel to remove it as soon as possible. (Default is true). + +**use_deferred_deletion**="" + +Marks device for deferred deletion. If the device is in use when it driver attempts to delete it, driver continue to attempt to delete device every 30 seconds, or when it restarts. (Default is true). + +**xfs_nospace_max_retries**="" + +Specifies the maximum number of retries XFS should attempt to complete IO when ENOSPC (no space) error is returned by underlying storage device. (Default is 0, which means to try continuously. + +# HISTORY +May 2017, Originally compiled by Dan Walsh +Format copied from crio.conf man page created by Aleksa Sarai diff --git a/SOURCES/mounts.conf b/SOURCES/mounts.conf new file mode 100644 index 0000000..b7cde9d --- /dev/null +++ b/SOURCES/mounts.conf @@ -0,0 +1 @@ +/usr/share/rhel/secrets:/run/secrets diff --git a/SOURCES/policy.json.5.md b/SOURCES/policy.json.5.md new file mode 100644 index 0000000..ea07e56 --- /dev/null +++ b/SOURCES/policy.json.5.md @@ -0,0 +1,281 @@ +% POLICY.JSON(5) policy.json Man Page +% Miloslav Trmač +% September 2016 + +# NAME +policy.json - Syntax for the Signature Verification Configuration File + +## DESCRIPTION + +Signature verification policy files are used to specify policy, e.g. trusted keys, +applicable when deciding whether to accept an image, or individual signatures of that image, as valid. + +The default policy is stored (unless overridden at compile-time) at `/etc/containers/policy.json`; +applications performing verification may allow using a different policy instead. + +## FORMAT + +The signature verification policy file, usually called `policy.json`, +uses a JSON format. Unlike some other JSON files, its parsing is fairly strict: +unrecognized, duplicated or otherwise invalid fields cause the entire file, +and usually the entire operation, to be rejected. + +The purpose of the policy file is to define a set of *policy requirements* for a container image, +usually depending on its location (where it is being pulled from) or otherwise defined identity. + +Policy requirements can be defined for: + +- An individual *scope* in a *transport*. + The *transport* values are the same as the transport prefixes when pushing/pulling images (e.g. `docker:`, `atomic:`), + and *scope* values are defined by each transport; see below for more details. + + Usually, a scope can be defined to match a single image, and various prefixes of + such a most specific scope define namespaces of matching images. +- A default policy for a single transport, expressed using an empty string as a scope +- A global default policy. + +If multiple policy requirements match a given image, only the requirements from the most specific match apply, +the more general policy requirements definitions are ignored. + +This is expressed in JSON using the top-level syntax +```js +{ + "default": [/* policy requirements: global default */] + "transports": { + transport_name: { + "": [/* policy requirements: default for transport $transport_name */], + scope_1: [/* policy requirements: default for $scope_1 in $transport_name */], + scope_2: [/*…*/] + /*…*/ + }, + transport_name_2: {/*…*/} + /*…*/ + } +} +``` + +The global `default` set of policy requirements is mandatory; all of the other fields +(`transports` itself, any specific transport, the transport-specific default, etc.) are optional. + + +## Supported transports and their scopes + +### `atomic:` + +The `atomic:` transport refers to images in an Atomic Registry. + +Supported scopes use the form _hostname_[`:`_port_][`/`_namespace_[`/`_imagestream_ [`:`_tag_]]], +i.e. either specifying a complete name of a tagged image, or prefix denoting +a host/namespace/image stream. + +*Note:* The _hostname_ and _port_ refer to the Docker registry host and port (the one used +e.g. for `docker pull`), _not_ to the OpenShift API host and port. + +### `dir:` + +The `dir:` transport refers to images stored in local directories. + +Supported scopes are paths of directories (either containing a single image or +subdirectories possibly containing images). + +*Note:* The paths must be absolute and contain no symlinks. Paths violating these requirements may be silently ignored. + +The top-level scope `"/"` is forbidden; use the transport default scope `""`, +for consistency with other transports. + +### `docker:` + +The `docker:` transport refers to images in a registry implementing the "Docker Registry HTTP API V2". + +Scopes matching individual images are named Docker references *in the fully expanded form*, either +using a tag or digest. For example, `docker.io/library/busybox:latest` (*not* `busybox:latest`). + +More general scopes are prefixes of individual-image scopes, and specify a repository (by omitting the tag or digest), +a repository namespace, or a registry host (by only specifying the host name). + +### `oci:` + +The `oci:` transport refers to images in directories compliant with "Open Container Image Layout Specification". + +Supported scopes use the form _directory_`:`_tag_, and _directory_ referring to +a directory containing one or more tags, or any of the parent directories. + +*Note:* See `dir:` above for semantics and restrictions on the directory paths, they apply to `oci:` equivalently. + +### `tarball:` + +The `tarball:` transport refers to tarred up container root filesystems. + +Scopes are ignored. + +## Policy Requirements + +Using the mechanisms above, a set of policy requirements is looked up. The policy requirements +are represented as a JSON array of individual requirement objects. For an image to be accepted, +*all* of the requirements must be satisfied simulatenously. + +The policy requirements can also be used to decide whether an individual signature is accepted (= is signed by a recognized key of a known author); +in that case some requirements may apply only to some signatures, but each signature must be accepted by *at least one* requirement object. + +The following requirement objects are supported: + +### `insecureAcceptAnything` + +A simple requirement with the following syntax + +```json +{"type":"insecureAcceptAnything"} +``` + +This requirement accepts any image (but note that other requirements in the array still apply). + +When deciding to accept an individual signature, this requirement does not have any effect; it does *not* cause the signature to be accepted, though. + +This is useful primarily for policy scopes where no signature verification is required; +because the array of policy requirements must not be empty, this requirement is used +to represent the lack of requirements explicitly. + +### `reject` + +A simple requirement with the following syntax: + +```json +{"type":"reject"} +``` + +This requirement rejects every image, and every signature. + +### `signedBy` + +This requirement requires an image to be signed with an expected identity, or accepts a signature if it is using an expected identity and key. + +```js +{ + "type": "signedBy", + "keyType": "GPGKeys", /* The only currently supported value */ + "keyPath": "/path/to/local/keyring/file", + "keyData": "base64-encoded-keyring-data", + "signedIdentity": identity_requirement +} +``` + + +Exactly one of `keyPath` and `keyData` must be present, containing a GPG keyring of one or more public keys. Only signatures made by these keys are accepted. + +The `signedIdentity` field, a JSON object, specifies what image identity the signature claims about the image. +One of the following alternatives are supported: + +- The identity in the signature must exactly match the image identity. Note that with this, referencing an image by digest (with a signature claiming a _repository_`:`_tag_ identity) will fail. + + ```json + {"type":"matchExact"} + ``` +- If the image identity carries a tag, the identity in the signature must exactly match; + if the image identity uses a digest reference, the identity in the signature must be in the same repository as the image identity (using any tag). + + (Note that with images identified using digest references, the digest from the reference is validated even before signature verification starts.) + + ```json + {"type":"matchRepoDigestOrExact"} + ``` +- The identity in the signature must be in the same repository as the image identity. This is useful e.g. to pull an image using the `:latest` tag when the image is signed with a tag specifing an exact image version. + + ```json + {"type":"matchRepository"} + ``` +- The identity in the signature must exactly match a specified identity. + This is useful e.g. when locally mirroring images signed using their public identity. + + ```js + { + "type": "exactReference", + "dockerReference": docker_reference_value + } + ``` +- The identity in the signature must be in the same repository as a specified identity. + This combines the properties of `matchRepository` and `exactReference`. + + ```js + { + "type": "exactRepository", + "dockerRepository": docker_repository_value + } + ``` + +If the `signedIdentity` field is missing, it is treated as `matchRepoDigestOrExact`. + +*Note*: `matchExact`, `matchRepoDigestOrExact` and `matchRepository` can be only used if a Docker-like image identity is +provided by the transport. In particular, the `dir:` and `oci:` transports can be only +used with `exactReference` or `exactRepository`. + + + +## Examples + +It is *strongly* recommended to set the `default` policy to `reject`, and then +selectively allow individual transports and scopes as desired. + +### A reasonably locked-down system + +(Note that the `/*`…`*/` comments are not valid in JSON, and must not be used in real policies.) + +```js +{ + "default": [{"type": "reject"}], /* Reject anything not explicitly allowed */ + "transports": { + "docker": { + /* Allow installing images from a specific repository namespace, without cryptographic verification. + This namespace includes images like openshift/hello-openshift and openshift/origin. */ + "docker.io/openshift": [{"type": "insecureAcceptAnything"}], + /* Similarly, allow installing the “official” busybox images. Note how the fully expanded + form, with the explicit /library/, must be used. */ + "docker.io/library/busybox": [{"type": "insecureAcceptAnything"}] + /* Other docker: images use the global default policy and are rejected */ + }, + "dir": { + "": [{"type": "insecureAcceptAnything"}] /* Allow any images originating in local directories */ + }, + "atomic": { + /* The common case: using a known key for a repository or set of repositories */ + "hostname:5000/myns/official": [ + { + "type": "signedBy", + "keyType": "GPGKeys", + "keyPath": "/path/to/official-pubkey.gpg" + } + ], + /* A more complex example, for a repository which contains a mirror of a third-party product, + which must be signed-off by local IT */ + "hostname:5000/vendor/product": [ + { /* Require the image to be signed by the original vendor, using the vendor's repository location. */ + "type": "signedBy", + "keyType": "GPGKeys", + "keyPath": "/path/to/vendor-pubkey.gpg", + "signedIdentity": { + "type": "exactRepository", + "dockerRepository": "vendor-hostname/product/repository" + } + }, + { /* Require the image to _also_ be signed by a local reviewer. */ + "type": "signedBy", + "keyType": "GPGKeys", + "keyPath": "/path/to/reviewer-pubkey.gpg" + } + ] + } + } +} +``` + +### Completely disable security, allow all images, do not trust any signatures + +```json +{ + "default": [{"type": "insecureAcceptAnything"}] +} +``` +# SEE ALSO + atomic(1) + +# HISTORY +September 2016, Originally compiled by Miloslav Trmač diff --git a/SOURCES/registries.conf b/SOURCES/registries.conf new file mode 100644 index 0000000..4c307b8 --- /dev/null +++ b/SOURCES/registries.conf @@ -0,0 +1,25 @@ +# This is a system-wide configuration file used to +# keep track of registries for various container backends. +# It adheres to TOML format and does not support recursive +# lists of registries. + +# The default location for this configuration file is /etc/containers/registries.conf. + +# The only valid categories are: 'registries.search', 'registries.insecure', +# and 'registries.block'. + +[registries.search] +registries = ['registry.redhat.io', 'quay.io', 'docker.io'] + +# If you need to access insecure registries, add the registry's fully-qualified name. +# An insecure registry is one that does not have a valid SSL certificate or only does HTTP. +[registries.insecure] +registries = [] + + +# If you need to block pull access from a registry, uncomment the section below +# and add the registries fully-qualified name. +# +# Docker only +[registries.block] +registries = [] diff --git a/SOURCES/registries.conf.5.md b/SOURCES/registries.conf.5.md new file mode 100644 index 0000000..3aa4ad5 --- /dev/null +++ b/SOURCES/registries.conf.5.md @@ -0,0 +1,41 @@ +% registries.conf(5) System-wide registry configuration file +% Brent Baude +% Aug 2017 + +# NAME +registries.conf - Syntax of System Registry Configuration File + +# DESCRIPTION +The REGISTRIES configuration file is a system-wide configuration file for container image +registries. The file format is TOML. + +# FORMAT +The TOML_format is used to build simple list format for registries under two +categories: `search` and `insecure`. You can list multiple registries using +as a comma separated list. + +Search registries are used when the caller of a container runtime does not fully specify the +container image that they want to execute. These registries are prepended onto the front + of the specified container image until the named image is found at a registry. + +Insecure Registries. By default container runtimes use TLS when retrieving images +from a registry. If the registry is not setup with TLS, then the container runtime +will fail to pull images from the registry. If you add the registry to the list of +insecure registries then the container runtime will attempt use standard web protocols to +pull the image. It also allows you to pull from a registry with self-signed certificates. +Note insecure registries can be used for any registry, not just the +registries listed under search. + +The following example configuration defines two searchable registries and one +insecure registry. + +``` +[registries.search] +registries = ["registry1.com", "registry2.com"] + +[registries.insecure] +registries = ["registry3.com"] +``` + +# HISTORY +Aug 2017, Originally compiled by Brent Baude diff --git a/SOURCES/seccomp.json b/SOURCES/seccomp.json new file mode 100644 index 0000000..fe9eda5 --- /dev/null +++ b/SOURCES/seccomp.json @@ -0,0 +1,773 @@ +{ + "defaultAction": "SCMP_ACT_ERRNO", + "archMap": [ + { + "architecture": "SCMP_ARCH_X86_64", + "subArchitectures": [ + "SCMP_ARCH_X86", + "SCMP_ARCH_X32" + ] + }, + { + "architecture": "SCMP_ARCH_AARCH64", + "subArchitectures": [ + "SCMP_ARCH_ARM" + ] + }, + { + "architecture": "SCMP_ARCH_MIPS64", + "subArchitectures": [ + "SCMP_ARCH_MIPS", + "SCMP_ARCH_MIPS64N32" + ] + }, + { + "architecture": "SCMP_ARCH_MIPS64N32", + "subArchitectures": [ + "SCMP_ARCH_MIPS", + "SCMP_ARCH_MIPS64" + ] + }, + { + "architecture": "SCMP_ARCH_MIPSEL64", + "subArchitectures": [ + "SCMP_ARCH_MIPSEL", + "SCMP_ARCH_MIPSEL64N32" + ] + }, + { + "architecture": "SCMP_ARCH_MIPSEL64N32", + "subArchitectures": [ + "SCMP_ARCH_MIPSEL", + "SCMP_ARCH_MIPSEL64" + ] + }, + { + "architecture": "SCMP_ARCH_S390X", + "subArchitectures": [ + "SCMP_ARCH_S390" + ] + } + ], + "syscalls": [ + { + "names": [ + "accept", + "accept4", + "access", + "adjtimex", + "alarm", + "bind", + "brk", + "capget", + "capset", + "chdir", + "chmod", + "chown", + "chown32", + "clock_getres", + "clock_gettime", + "clock_nanosleep", + "close", + "connect", + "copy_file_range", + "creat", + "dup", + "dup2", + "dup3", + "epoll_create", + "epoll_create1", + "epoll_ctl", + "epoll_ctl_old", + "epoll_pwait", + "epoll_wait", + "epoll_wait_old", + "eventfd", + "eventfd2", + "execve", + "execveat", + "exit", + "exit_group", + "faccessat", + "fadvise64", + "fadvise64_64", + "fallocate", + "fanotify_mark", + "fchdir", + "fchmod", + "fchmodat", + "fchown", + "fchown32", + "fchownat", + "fcntl", + "fcntl64", + "fdatasync", + "fgetxattr", + "flistxattr", + "flock", + "fork", + "fremovexattr", + "fsetxattr", + "fstat", + "fstat64", + "fstatat64", + "fstatfs", + "fstatfs64", + "fsync", + "ftruncate", + "ftruncate64", + "futex", + "futimesat", + "getcpu", + "getcwd", + "getdents", + "getdents64", + "getegid", + "getegid32", + "geteuid", + "geteuid32", + "getgid", + "getgid32", + "getgroups", + "getgroups32", + "getitimer", + "getpeername", + "getpgid", + "getpgrp", + "getpid", + "getppid", + "getpriority", + "getrandom", + "getresgid", + "getresgid32", + "getresuid", + "getresuid32", + "getrlimit", + "get_robust_list", + "getrusage", + "getsid", + "getsockname", + "getsockopt", + "get_thread_area", + "gettid", + "gettimeofday", + "getuid", + "getuid32", + "getxattr", + "inotify_add_watch", + "inotify_init", + "inotify_init1", + "inotify_rm_watch", + "io_cancel", + "ioctl", + "io_destroy", + "io_getevents", + "ioprio_get", + "ioprio_set", + "io_setup", + "io_submit", + "ipc", + "kill", + "lchown", + "lchown32", + "lgetxattr", + "link", + "linkat", + "listen", + "listxattr", + "llistxattr", + "_llseek", + "lremovexattr", + "lseek", + "lsetxattr", + "lstat", + "lstat64", + "madvise", + "memfd_create", + "mincore", + "mkdir", + "mkdirat", + "mknod", + "mknodat", + "mlock", + "mlock2", + "mlockall", + "mmap", + "mmap2", + "mprotect", + "mq_getsetattr", + "mq_notify", + "mq_open", + "mq_timedreceive", + "mq_timedsend", + "mq_unlink", + "mremap", + "msgctl", + "msgget", + "msgrcv", + "msgsnd", + "msync", + "munlock", + "munlockall", + "munmap", + "nanosleep", + "newfstatat", + "_newselect", + "open", + "openat", + "pause", + "pipe", + "pipe2", + "poll", + "ppoll", + "prctl", + "pread64", + "preadv", + "preadv2", + "prlimit64", + "pselect6", + "pwrite64", + "pwritev", + "pwritev2", + "read", + "readahead", + "readlink", + "readlinkat", + "readv", + "recv", + "recvfrom", + "recvmmsg", + "recvmsg", + "remap_file_pages", + "removexattr", + "rename", + "renameat", + "renameat2", + "restart_syscall", + "rmdir", + "rt_sigaction", + "rt_sigpending", + "rt_sigprocmask", + "rt_sigqueueinfo", + "rt_sigreturn", + "rt_sigsuspend", + "rt_sigtimedwait", + "rt_tgsigqueueinfo", + "sched_getaffinity", + "sched_getattr", + "sched_getparam", + "sched_get_priority_max", + "sched_get_priority_min", + "sched_getscheduler", + "sched_rr_get_interval", + "sched_setaffinity", + "sched_setattr", + "sched_setparam", + "sched_setscheduler", + "sched_yield", + "seccomp", + "select", + "semctl", + "semget", + "semop", + "semtimedop", + "send", + "sendfile", + "sendfile64", + "sendmmsg", + "sendmsg", + "sendto", + "setfsgid", + "setfsgid32", + "setfsuid", + "setfsuid32", + "setgid", + "setgid32", + "setgroups", + "setgroups32", + "setitimer", + "setpgid", + "setpriority", + "setregid", + "setregid32", + "setresgid", + "setresgid32", + "setresuid", + "setresuid32", + "setreuid", + "setreuid32", + "setrlimit", + "set_robust_list", + "setsid", + "setsockopt", + "set_thread_area", + "set_tid_address", + "setuid", + "setuid32", + "setxattr", + "shmat", + "shmctl", + "shmdt", + "shmget", + "shutdown", + "sigaltstack", + "signalfd", + "signalfd4", + "sigreturn", + "socket", + "socketcall", + "socketpair", + "splice", + "stat", + "stat64", + "statfs", + "statfs64", + "statx", + "symlink", + "symlinkat", + "sync", + "sync_file_range", + "syncfs", + "sysinfo", + "syslog", + "tee", + "tgkill", + "time", + "timer_create", + "timer_delete", + "timerfd_create", + "timerfd_gettime", + "timerfd_settime", + "timer_getoverrun", + "timer_gettime", + "timer_settime", + "times", + "tkill", + "truncate", + "truncate64", + "ugetrlimit", + "umask", + "uname", + "unlink", + "unlinkat", + "utime", + "utimensat", + "utimes", + "vfork", + "vmsplice", + "wait4", + "waitid", + "waitpid", + "write", + "writev", + "mount", + "umount2", + "reboot", + "name_to_handle_at", + "unshare" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": {}, + "excludes": {} + }, + { + "names": [ + "personality" + ], + "action": "SCMP_ACT_ALLOW", + "args": [ + { + "index": 0, + "value": 0, + "valueTwo": 0, + "op": "SCMP_CMP_EQ" + } + ], + "comment": "", + "includes": {}, + "excludes": {} + }, + { + "names": [ + "personality" + ], + "action": "SCMP_ACT_ALLOW", + "args": [ + { + "index": 0, + "value": 8, + "valueTwo": 0, + "op": "SCMP_CMP_EQ" + } + ], + "comment": "", + "includes": {}, + "excludes": {} + }, + { + "names": [ + "personality" + ], + "action": "SCMP_ACT_ALLOW", + "args": [ + { + "index": 0, + "value": 131072, + "valueTwo": 0, + "op": "SCMP_CMP_EQ" + } + ], + "comment": "", + "includes": {}, + "excludes": {} + }, + { + "names": [ + "personality" + ], + "action": "SCMP_ACT_ALLOW", + "args": [ + { + "index": 0, + "value": 131080, + "valueTwo": 0, + "op": "SCMP_CMP_EQ" + } + ], + "comment": "", + "includes": {}, + "excludes": {} + }, + { + "names": [ + "personality" + ], + "action": "SCMP_ACT_ALLOW", + "args": [ + { + "index": 0, + "value": 4294967295, + "valueTwo": 0, + "op": "SCMP_CMP_EQ" + } + ], + "comment": "", + "includes": {}, + "excludes": {} + }, + { + "names": [ + "sync_file_range2" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "arches": [ + "ppc64le" + ] + }, + "excludes": {} + }, + { + "names": [ + "arm_fadvise64_64", + "arm_sync_file_range", + "sync_file_range2", + "breakpoint", + "cacheflush", + "set_tls" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "arches": [ + "arm", + "arm64" + ] + }, + "excludes": {} + }, + { + "names": [ + "arch_prctl" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "arches": [ + "amd64", + "x32" + ] + }, + "excludes": {} + }, + { + "names": [ + "modify_ldt" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "arches": [ + "amd64", + "x32", + "x86" + ] + }, + "excludes": {} + }, + { + "names": [ + "s390_pci_mmio_read", + "s390_pci_mmio_write", + "s390_runtime_instr" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "arches": [ + "s390", + "s390x" + ] + }, + "excludes": {} + }, + { + "names": [ + "open_by_handle_at" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_DAC_READ_SEARCH" + ] + }, + "excludes": {} + }, + { + "names": [ + "bpf", + "clone", + "fanotify_init", + "lookup_dcookie", + "mount", + "name_to_handle_at", + "perf_event_open", + "quotactl", + "setdomainname", + "sethostname", + "setns", + "umount", + "umount2", + "unshare" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_ADMIN" + ] + }, + "excludes": {} + }, + { + "names": [ + "clone" + ], + "action": "SCMP_ACT_ALLOW", + "args": [ + { + "index": 0, + "value": 2080505856, + "valueTwo": 0, + "op": "SCMP_CMP_MASKED_EQ" + } + ], + "comment": "", + "includes": {}, + "excludes": { + "caps": [ + "CAP_SYS_ADMIN" + ], + "arches": [ + "s390", + "s390x" + ] + } + }, + { + "names": [ + "clone" + ], + "action": "SCMP_ACT_ALLOW", + "args": [ + { + "index": 1, + "value": 2080505856, + "valueTwo": 0, + "op": "SCMP_CMP_MASKED_EQ" + } + ], + "comment": "s390 parameter ordering for clone is different", + "includes": { + "arches": [ + "s390", + "s390x" + ] + }, + "excludes": { + "caps": [ + "CAP_SYS_ADMIN" + ] + } + }, + { + "names": [ + "reboot" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_BOOT" + ] + }, + "excludes": {} + }, + { + "names": [ + "chroot" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_CHROOT" + ] + }, + "excludes": {} + }, + { + "names": [ + "delete_module", + "init_module", + "finit_module", + "query_module" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_MODULE" + ] + }, + "excludes": {} + }, + { + "names": [ + "get_mempolicy", + "mbind", + "name_to_handle_at", + "set_mempolicy" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_NICE" + ] + }, + "excludes": {} + }, + { + "names": [ + "acct" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_PACCT" + ] + }, + "excludes": {} + }, + { + "names": [ + "kcmp", + "process_vm_readv", + "process_vm_writev", + "ptrace" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_PTRACE" + ] + }, + "excludes": {} + }, + { + "names": [ + "iopl", + "ioperm" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_RAWIO" + ] + }, + "excludes": {} + }, + { + "names": [ + "settimeofday", + "stime", + "clock_settime" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_TIME" + ] + }, + "excludes": {} + }, + { + "names": [ + "vhangup" + ], + "action": "SCMP_ACT_ALLOW", + "args": [], + "comment": "", + "includes": { + "caps": [ + "CAP_SYS_TTY_CONFIG" + ] + }, + "excludes": {} + } + ] +} diff --git a/SOURCES/storage.conf b/SOURCES/storage.conf new file mode 100644 index 0000000..b8555fd --- /dev/null +++ b/SOURCES/storage.conf @@ -0,0 +1,114 @@ +# storage.conf is the configuration file for all tools +# that share the containers/storage libraries +# See man 5 containers-storage.conf for more information +# The "container storage" table contains all of the server options. +[storage] + +# Default Storage Driver +driver = "overlay" + +# Temporary storage location +runroot = "/var/run/containers/storage" + +# Primary Read/Write location of container storage +graphroot = "/var/lib/containers/storage" + +[storage.options] +# Storage options to be passed to underlying storage drivers + +# AdditionalImageStores is used to pass paths to additional Read/Only image stores +# Must be comma separated list. +additionalimagestores = [ +] + +# Size is used to set a maximum size of the container image. Only supported by +# certain container storage drivers. +size = "" + +# OverrideKernelCheck tells the driver to ignore kernel checks based on kernel version +override_kernel_check = "true" + +# Remap-UIDs/GIDs is the mapping from UIDs/GIDs as they should appear inside of +# a container, to UIDs/GIDs as they should appear outside of the container, and +# the length of the range of UIDs/GIDs. Additional mapped sets can be listed +# and will be heeded by libraries, but there are limits to the number of +# mappings which the kernel will allow when you later attempt to run a +# container. +# +# remap-uids = 0:1668442479:65536 +# remap-gids = 0:1668442479:65536 + +# Remap-User/Group is a name which can be used to look up one or more UID/GID +# ranges in the /etc/subuid or /etc/subgid file. Mappings are set up starting +# with an in-container ID of 0 and the a host-level ID taken from the lowest +# range that matches the specified name, and using the length of that range. +# Additional ranges are then assigned, using the ranges which specify the +# lowest host-level IDs first, to the lowest not-yet-mapped container-level ID, +# until all of the entries have been used for maps. +# +# remap-user = "storage" +# remap-group = "storage" + +[storage.options.thinpool] +# Storage Options for thinpool + +# autoextend_percent determines the amount by which pool needs to be +# grown. This is specified in terms of % of pool size. So a value of 20 means +# that when threshold is hit, pool will be grown by 20% of existing +# pool size. +# autoextend_percent = "20" + +# autoextend_threshold determines the pool extension threshold in terms +# of percentage of pool size. For example, if threshold is 60, that means when +# pool is 60% full, threshold has been hit. +# autoextend_threshold = "80" + +# basesize specifies the size to use when creating the base device, which +# limits the size of images and containers. +# basesize = "10G" + +# blocksize specifies a custom blocksize to use for the thin pool. +# blocksize="64k" + +# directlvm_device specifies a custom block storage device to use for the +# thin pool. Required if you setup devicemapper +# directlvm_device = "" + +# directlvm_device_force wipes device even if device already has a filesystem +# directlvm_device_force = "True" + +# fs specifies the filesystem type to use for the base device. +# fs="xfs" + +# log_level sets the log level of devicemapper. +# 0: LogLevelSuppress 0 (Default) +# 2: LogLevelFatal +# 3: LogLevelErr +# 4: LogLevelWarn +# 5: LogLevelNotice +# 6: LogLevelInfo +# 7: LogLevelDebug +# log_level = "7" + +# min_free_space specifies the min free space percent in a thin pool require for +# new device creation to succeed. Valid values are from 0% - 99%. +# Value 0% disables +# min_free_space = "10%" + +# mkfsarg specifies extra mkfs arguments to be used when creating the base +# device. +# mkfsarg = "" + +# mountopt specifies extra mount options used when mounting the thin devices. +# mountopt = "" + +# use_deferred_removal Marking device for deferred removal +# use_deferred_removal = "True" + +# use_deferred_deletion Marking device for deferred deletion +# use_deferred_deletion = "True" + +# xfs_nospace_max_retries specifies the maximum number of retries XFS should +# attempt to complete IO when ENOSPC (no space) error is returned by +# underlying storage device. +# xfs_nospace_max_retries = "0" diff --git a/SPECS/skopeo.spec b/SPECS/skopeo.spec new file mode 100644 index 0000000..43b3989 --- /dev/null +++ b/SPECS/skopeo.spec @@ -0,0 +1,407 @@ +%global with_debug 1 +%global with_check 0 + +%if 0%{?with_debug} +%global _find_debuginfo_dwz_opts %{nil} +%global _dwz_low_mem_die_limit 0 +%else +%global debug_package %{nil} +%endif + +%if 0%{?rhel} > 7 && ! 0%{?fedora} +%define gobuild(o:) \ +go build -buildmode pie -compiler gc -tags="rpm_crashtraceback no_openssl ${BUILDTAGS:-}" -ldflags "${LDFLAGS:-} -compressdwarf=false -B 0x$(head -c20 /dev/urandom|od -An -tx1|tr -d ' \\n') -extldflags '%__global_ldflags'" -a -v -x %{?**}; +%endif # distro + +%global provider github +%global provider_tld com +%global project containers +%global repo skopeo +# https://github.com/containers/skopeo +%global provider_prefix %{provider}.%{provider_tld}/%{project}/%{repo} +%global import_path %{provider_prefix} +%global git0 https://%{import_path} +%global commit0 1715c9084124875cb71f006916396e3c7d03014e +%global shortcommit0 %(c=%{commit0}; echo ${c:0:7}) + +# manually listed arches due https://bugzilla.redhat.com/show_bug.cgi?id=1391932 (removed ppc64) +# remove ix86 temporarily because go-toolset issues +ExcludeArch: ppc64 %{ix86} + +Name: %{repo} +Epoch: 1 +Version: 0.1.32 +Release: 3.git%{shortcommit0}%{?dist} +Summary: Inspect Docker images and repositories on registries +License: ASL 2.0 +URL: %{git0} +Source0: %{git0}/archive/%{commit0}/%{name}-%{shortcommit0}.tar.gz +Source1: storage.conf +Source2: containers-storage.conf.5.md +Source3: mounts.conf +Source4: registries.conf.5.md +Source5: registries.conf +Source6: policy.json.5.md +Source7: seccomp.json +BuildRequires: git +# If go_compiler is not set to 1, there is no virtual provide. Use golang instead. +BuildRequires: %{?go_compiler:compiler(go-compiler)}%{!?go_compiler:golang} +BuildRequires: golang-github-cpuguy83-go-md2man +BuildRequires: gpgme-devel +BuildRequires: libassuan-devel +BuildRequires: pkgconfig(devmapper) +BuildRequires: ostree-devel +BuildRequires: glib2-devel +Requires: containers-common = %{epoch}:%{version}-%{release} + +%description +Command line utility to inspect images and repositories directly on Docker +registries without the need to pull them + +%package -n containers-common +Summary: Configuration files for working with image signatures +Obsoletes: atomic <= 1:1.13.1-2 +Conflicts: atomic-registries <= 1:1.22.1-1 +Obsoletes: docker-rhsubscription <= 2:1.13.1-31 +Provides: %{name}-containers = %{epoch}:%{version}-%{release} +Obsoletes: %{name}-containers <= 1:0.1.31-3 +Recommends: fuse-overlayfs +Recommends: slirp4netns + +%description -n containers-common +This package installs a default signature store configuration and a default +policy under `/etc/containers/`. + +%prep +%autosetup -Sgit -n %{name}-%{commit0} + +%build +mkdir -p src/github.com/containers +ln -s ../../../ src/%{import_path} + +mkdir -p vendor/src +for v in vendor/*; do + if test ${v} = vendor/src; then continue; fi + if test -d ${v}; then + mv ${v} vendor/src/ + fi +done + +export GOPATH=$(pwd):$(pwd)/vendor:%{gopath} +#make BUILDTAGS='exclude_graphdriver_btrfs' binary-local docs +export BUILDTAGS="exclude_graphdriver_btrfs" +%gobuild -o %{name} ./cmd/%{name} +make docs + +%install +make DESTDIR=%{buildroot} install +mkdir -p %{buildroot}%{_sysconfdir} +install -m0644 %{SOURCE1} %{buildroot}%{_sysconfdir}/containers/storage.conf +mkdir -p %{buildroot}%{_mandir}/man5 +go-md2man -in %{SOURCE2} -out %{buildroot}%{_mandir}/man5/containers-storage.conf.5 +go-md2man -in %{SOURCE4} -out %{buildroot}%{_mandir}/man5/registries.conf.5 +install -p -m 644 %{SOURCE5} %{buildroot}%{_sysconfdir}/containers/ +go-md2man -in %{SOURCE6} -out %{buildroot}%{_mandir}/man5/policy.json.5 + +mkdir -p %{buildroot}%{_datadir}/containers +install -m0644 %{SOURCE3} %{buildroot}%{_datadir}/containers/mounts.conf +install -m0644 %{SOURCE7} %{buildroot}%{_datadir}/containers/seccomp.json + +# install secrets patch directory +install -d -p -m 750 %{buildroot}/%{_datadir}/rhel/secrets +# rhbz#1110876 - update symlinks for subscription management +ln -s %{_sysconfdir}/pki/entitlement %{buildroot}%{_datadir}/rhel/secrets/etc-pki-entitlement +ln -s %{_sysconfdir}/rhsm %{buildroot}%{_datadir}/rhel/secrets/rhsm +ln -s %{_sysconfdir}/yum.repos.d/redhat.repo %{buildroot}%{_datadir}/rhel/secrets/rhel7.repo + +%check +%if 0%{?with_check} +export GOPATH=%{buildroot}/%{gopath}:$(pwd)/vendor:%{gopath} +%gotest %{import_path}/integration +%endif + +#define license tag if not already defined +%{!?_licensedir:%global license %doc} + +%files -n containers-common +%dir %{_sysconfdir}/containers +%dir %{_sysconfdir}/containers/registries.d +%config(noreplace) %{_sysconfdir}/containers/policy.json +%config(noreplace) %{_sysconfdir}/containers/registries.d/default.yaml +%config(noreplace) %{_sysconfdir}/containers/storage.conf +%config(noreplace) %{_sysconfdir}/containers/registries.conf +%dir %{_sharedstatedir}/atomic/sigstore +%{_mandir}/man5/* +%dir %{_datadir}/containers +%{_datadir}/containers/mounts.conf +%{_datadir}/containers/seccomp.json +%dir %{_datadir}/rhel/secrets +%{_datadir}/rhel/secrets/etc-pki-entitlement +%{_datadir}/rhel/secrets/rhel7.repo +%{_datadir}/rhel/secrets/rhsm + +%files +%license LICENSE +%doc README.md +%{_bindir}/%{name} +%{_mandir}/man1/%{name}.1* +%dir %{_datadir}/bash-completion +%dir %{_datadir}/bash-completion/completions +%{_datadir}/bash-completion/completions/%{name} + +%changelog +* Tue Dec 18 2018 Frantisek Kluknavsky - 1:0.1.32-3.git1715c90 +- rebase + +* Mon Dec 17 2018 Frantisek Kluknavsky - 1:0.1.32-2.git1715c90 +- re-enable debuginfo + +* Mon Dec 17 2018 Frantisek Kluknavsky - 1:0.1.31-12.gitb0b750d +- go tools not in scl anymore + +* Fri Sep 21 2018 Lokesh Mandvekar - 1:0.1.31-11.gitb0b750d +- Resolves: #1615609 +- built upstream tag v0.1.31 + +* Thu Aug 23 2018 Lokesh Mandvekar - 1:0.1.31-10.git0144aa8 +- Resolves: #1616069 - correct order of registries + +* Mon Aug 13 2018 Lokesh Mandvekar - 1:0.1.31-9.git0144aa8 +- Resolves: #1615609 - rebuild with gobuild tag 'no_openssl' + +* Fri Aug 10 2018 Lokesh Mandvekar - 1:0.1.31-8.git0144aa8 +- Resolves: #1614934 - containers-common soft dep on slirp4netns and +fuse-overlayfs + +* Wed Aug 08 2018 Lokesh Mandvekar - 1:0.1.31-7.git0144aa8 +- build with %%gobuild +- use scl-ized go-toolset as dep +- disable i686 builds temporarily because of go-toolset issues + +* Wed Jul 18 2018 dwalsh - 1:0.1.31-6.git0144aa8 +- add statx to seccomp.json to containers-config +- add seccomp.json to containers-config + +* Tue Jul 03 2018 Lokesh Mandvekar - 1:0.1.31-4.git0144aa8 +- Resolves: #1597629 - handle dependency issue for skopeo-containers +- rename skopeo-containers to containers-common as in Fedora + +* Mon Jun 25 2018 Lokesh Mandvekar - 1:0.1.31-3.git0144aa8 +- Resolves: #1583762 - btrfs dep removal needs exclude_graphdriver_btrfs +buildtag + +* Wed Jun 13 2018 Lokesh Mandvekar - 1:0.1.31-2.git0144aa8 +- correct bz in previous changelog + +* Wed Jun 13 2018 Lokesh Mandvekar - 1:0.1.31-1.git0144aa8 +- Resolves: #1580938 - resolve FTBFS +- Resolves: #1583762 - remove dependency on btrfs-progs-devel +- bump to v0.1.31 (from master) +- built commit ca3bff6 +- use go-toolset deps for rhel8 + +* Tue Apr 03 2018 baude - 0.1.29-5.git7add6fc +- Fix small typo in registries.conf + +* Tue Apr 3 2018 dwalsh - 0.1.29-4.git +- Add policy.json.5 + +* Mon Apr 2 2018 dwalsh - 0.1.29-3.git +- Add registries.conf + +* Mon Apr 2 2018 dwalsh - 0.1.29-2.git +- Add registries.conf man page + +* Thu Mar 29 2018 dwalsh - 0.1.29-1.git +- bump to 0.1.29-1 +- Updated containers/image + docker-archive generates docker legacy compatible images + Do not create $DiffID subdirectories for layers with no configs + Ensure the layer IDs in legacy docker/tarfile metadata are unique + docker-archive: repeated layers are symlinked in the tar file + sysregistries: remove all trailing slashes + Improve docker/* error messages + Fix failure to make auth directory + Create a new slice in Schema1.UpdateLayerInfos + Drop unused storageImageDestination.{image,systemContext} + Load a *storage.Image only once in storageImageSource + Support gzip for docker-archive files + Remove .tar extension from blob and config file names + ostree, src: support copy of compressed layers + ostree: re-pull layer if it misses uncompressed_digest|uncompressed_size + image: fix docker schema v1 -> OCI conversion + Add /etc/containers/certs.d as default certs directory + +* Fri Feb 09 2018 Fedora Release Engineering - 0.1.28-2.git0270e56 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild + +* Fri Feb 2 2018 dwalsh - 0.1.28-1.git +- Vendor in fixed libraries in containers/image and containers/storage + +* Tue Nov 21 2017 dwalsh - 0.1.27-1.git +- Fix Conflicts to Obsoletes +- Add better docs to man pages. +- Use credentials from authfile for skopeo commands +- Support storage="" in /etc/containers/storage.conf +- Add global --override-arch and --override-os options + +* Wed Nov 15 2017 dwalsh - 0.1.25-2.git2e8377a7 +- Add manifest type conversion to skopeo copy +- User can select from 3 manifest types: oci, v2s1, or v2s2 +- e.g skopeo copy --format v2s1 --compress-blobs docker-archive:alp.tar dir:my-directory + +* Wed Nov 8 2017 dwalsh - 0.1.25-2.git7fd6f66b +- Force storage.conf to default to overlay + +* Wed Nov 8 2017 dwalsh - 0.1.25-1.git7fd6f66b +- Fix CVE in tar-split +- copy: add shared blob directory support for OCI sources/destinations +- Aligning Docker version between containers/image and skopeo +- Update image-tools, and remove the duplicate Sirupsen/logrus vendor +- makefile: use -buildmode=pie + +* Tue Nov 7 2017 dwalsh - 0.1.24-8.git28d4e08a +- Add /usr/share/containers/mounts.conf + +* Sun Oct 22 2017 dwalsh - 0.1.24-7.git28d4e08a +- Bug fixes +- Update to release + +* Tue Oct 17 2017 Lokesh Mandvekar - 0.1.24-6.dev.git28d4e08 +- skopeo-containers conflicts with docker-rhsubscription <= 2:1.13.1-31 + +* Tue Oct 17 2017 dwalsh - 0.1.24-5.dev.git28d4e08 +- Add rhel subscription secrets data to skopeo-containers + +* Thu Oct 12 2017 dwalsh - 0.1.24-4.dev.git28d4e08 +- Update container/storage.conf and containers-storage.conf man page +- Default override to true so it is consistent with RHEL. + +* Tue Oct 10 2017 Lokesh Mandvekar - 0.1.24-3.dev.git28d4e08 +- built commit 28d4e08 + +* Mon Sep 18 2017 Lokesh Mandvekar - 0.1.24-2.dev.git875dd2e +- built commit 875dd2e +- Resolves: gh#416 + +* Tue Sep 12 2017 Lokesh Mandvekar - 0.1.24-1.dev.gita41cd0 +- bump to 0.1.24-dev +- correct a prior bogus date +- fix macro in comment warning + +* Mon Aug 21 2017 dwalsh - 0.1.23-6.dev.git1bbd87 +- Change name of storage.conf.5 man page to containers-storage.conf.5, since +it conflicts with inn package +- Also remove default to "overalay" in the configuration, since we should +- allow containers storage to pick the best default for the platform. + +* Thu Aug 03 2017 Fedora Release Engineering - 0.1.23-5.git1bbd87f +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild + +* Sun Jul 30 2017 Florian Weimer - 0.1.23-4.git1bbd87f +- Rebuild with binutils fix for ppc64le (#1475636) + +* Thu Jul 27 2017 Fedora Release Engineering - 0.1.23-3.git1bbd87f +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild + +* Tue Jul 25 2017 dwalsh - 0.1.23-2.dev.git1bbd87 +- Fix storage.conf man page to be storage.conf.5.gz so that it works. + +* Fri Jul 21 2017 dwalsh - 0.1.23-1.dev.git1bbd87 +- Support for OCI V1.0 Images +- Update to image-spec v1.0.0 and revendor +- Fixes for authentication + +* Sat Jul 01 2017 Lokesh Mandvekar - 0.1.22-2.dev.git5d24b67 +- Epoch: 1 for CentOS as CentOS Extras' build already has epoch set to 1 + +* Wed Jun 21 2017 dwalsh - 0.1.22-1.dev.git5d24b67 +- Give more useful help when explaining usage +- Also specify container-storage as a valid transport +- Remove docker reference wherever possible +- vendor in ostree fixes + +* Thu Jun 15 2017 dwalsh - 0.1.21-1.dev.git0b73154 +- Add support for storage.conf and storage-config.5.md from github container storage package +- Bump to the latest version of skopeo +- vendor.conf: add ostree-go +- it is used by containers/image for pulling images to the OSTree storage. +- fail early when image os does not match host os +- Improve documentation on what to do with containers/image failures in test-skopeo +- We now have the docker-archive: transport +- Integration tests with built registries also exist +- Support /etc/docker/certs.d +- update image-spec to v1.0.0-rc6 + +* Tue May 23 2017 bbaude - 0.1.20-1.dev.git0224d8c +- BZ #1380078 - New release + +* Tue Apr 25 2017 bbaude - 0.1.19-2.dev.git0224d8c +- No golang support for ppc64. Adding exclude arch. BZ #1445490 + +* Tue Feb 28 2017 Lokesh Mandvekar - 0.1.19-1.dev.git0224d8c +- bump to v0.1.19-dev +- built commit 0224d8c + +* Sat Feb 11 2017 Fedora Release Engineering - 0.1.17-3.dev.git2b3af4a +- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild + +* Sat Dec 10 2016 Igor Gnatenko - 0.1.17-2.dev.git2b3af4a +- Rebuild for gpgme 1.18 + +* Tue Dec 06 2016 Lokesh Mandvekar - 0.1.17-1.dev.git2b3af4a +- bump to 0.1.17-dev + +* Fri Nov 04 2016 Antonio Murdaca - 0.1.14-6.git550a480 +- Fix BZ#1391932 + +* Tue Oct 18 2016 Antonio Murdaca - 0.1.14-5.git550a480 +- Conflicts with atomic in skopeo-containers + +* Wed Oct 12 2016 Antonio Murdaca - 0.1.14-4.git550a480 +- built skopeo-containers + +* Wed Sep 21 2016 Lokesh Mandvekar - 0.1.14-3.gitd830391 +- built mtrmac/integrate-all-the-things commit d830391 + +* Thu Sep 08 2016 Lokesh Mandvekar - 0.1.14-2.git362bfc5 +- built commit 362bfc5 + +* Thu Aug 11 2016 Lokesh Mandvekar - 0.1.14-1.gitffe92ed +- build origin/master commit ffe92ed + +* Thu Jul 21 2016 Fedora Release Engineering - 0.1.13-6 +- https://fedoraproject.org/wiki/Changes/golang1.7 + +* Tue Jun 21 2016 Lokesh Mandvekar - 0.1.13-5 +- include go-srpm-macros and compiler(go-compiler) in fedora conditionals +- define %%gobuild if not already +- add patch to build with older version of golang + +* Thu Jun 02 2016 Antonio Murdaca - 0.1.13-4 +- update to v0.1.12 + +* Tue May 31 2016 Antonio Murdaca - 0.1.12-3 +- fix go build source path + +* Fri May 27 2016 Antonio Murdaca - 0.1.12-2 +- update to v0.1.12 + +* Tue Mar 08 2016 Antonio Murdaca - 0.1.11-1 +- update to v0.1.11 + +* Tue Mar 08 2016 Antonio Murdaca - 0.1.10-1 +- update to v0.1.10 +- change runcom -> projectatomic + +* Mon Feb 29 2016 Antonio Murdaca - 0.1.9-1 +- update to v0.1.9 + +* Mon Feb 29 2016 Antonio Murdaca - 0.1.8-1 +- update to v0.1.8 + +* Mon Feb 22 2016 Fedora Release Engineering - 0.1.4-2 +- https://fedoraproject.org/wiki/Changes/golang1.6 + +* Fri Jan 29 2016 Antonio Murdaca - 0.1.4 +- First package for Fedora