From c00092ae3ab63a34f3d02a77fcf508f964ee75fc Mon Sep 17 00:00:00 2001 From: CentOS Sources Date: May 07 2019 06:20:19 +0000 Subject: import sg3_utils-1.44-2.el8 --- diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..1257202 --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +SOURCES/sg3_utils-1.44.tar.xz diff --git a/.sg3_utils.metadata b/.sg3_utils.metadata new file mode 100644 index 0000000..18733d1 --- /dev/null +++ b/.sg3_utils.metadata @@ -0,0 +1 @@ +b00dae1fc53fc4d31202f7a590233d98c1dda4d8 SOURCES/sg3_utils-1.44.tar.xz diff --git a/SOURCES/BZ_1633235-sg3_utils-1.44-covscan-fix.patch b/SOURCES/BZ_1633235-sg3_utils-1.44-covscan-fix.patch new file mode 100644 index 0000000..3ac642b --- /dev/null +++ b/SOURCES/BZ_1633235-sg3_utils-1.44-covscan-fix.patch @@ -0,0 +1,1427 @@ +From 7a39d7758c9c799bc6341a8a339a91692ec8a9dd Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Tue, 25 Sep 2018 18:52:26 +0800 +Subject: [PATCH 01/30] Fix overrunning array. + +Issue: + * `jrp` might pointing outside of join_arr after the for loop. + * Out of index: `op->cdb`. + +Fix: + * Check index number before dereferencing `jpr` pointer. + * Check index number before access `op->cdb` array. + +Signed-off-by: Gris Ge +--- + src/sg_raw.c | 2 +- + src/sg_ses.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/src/sg_raw.c b/src/sg_raw.c +index 92c2287..90c3d9c 100644 +--- a/src/sg_raw.c ++++ b/src/sg_raw.c +@@ -454,7 +454,7 @@ parse_cmd_line(struct opts_t * op, int argc, char *argv[]) + return SG_LIB_SYNTAX_ERROR; + } + +- if (op->cdb_length > MAX_SCSI_CDBSZ) { ++ if (op->cdb_length >= MAX_SCSI_CDBSZ) { + pr2serr("CDB too long (max. %d bytes)\n", MAX_SCSI_CDBSZ); + return SG_LIB_SYNTAX_ERROR; + } +diff --git a/src/sg_ses.c b/src/sg_ses.c +index abb1fea..29b66b3 100644 +--- a/src/sg_ses.c ++++ b/src/sg_ses.c +@@ -5310,7 +5310,7 @@ ses_cgs(struct sg_pt_base * ptvp, const struct tuple_acronym_val * tavp, + if (op->ind_indiv_last <= op->ind_indiv) + break; + } /* end of loop over join array */ +- if ((NULL == jrp->enc_statp) || (k >= MX_JOIN_ROWS)) { ++ if ((k >= MX_JOIN_ROWS) || (NULL == jrp->enc_statp)) { + if (op->desc_name) + pr2serr("descriptor name: %s not found (check the 'ed' page " + "[0x7])\n", op->desc_name); +-- +1.8.3.1 + + +From ad7d26c94ad555a647528c31eb11b78fc0ac4474 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Tue, 25 Sep 2018 18:59:01 +0800 +Subject: [PATCH 02/30] sg_persist: Workaround for false warning of covscan. + +The covscan think we might access out of index on `tid_arr` but +actually we did the index check before. + +Signed-off-by: Gris Ge +--- + src/sg_persist.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/sg_persist.c b/src/sg_persist.c +index f582d32..b565a5a 100644 +--- a/src/sg_persist.c ++++ b/src/sg_persist.c +@@ -824,7 +824,7 @@ decode_file_tids(const char * fnp, struct opts_t * op) + pr2serr("%s: array length exceeded\n", __func__); + goto bad; + } +- tid_arr[off + k] = h; ++ op->transportid_arr[off + k] = h; + lcp = strpbrk(lcp, " ,\t"); + if (NULL == lcp) + break; +-- +1.8.3.1 + + +From 24e54cf4c04fa7aa3bdf8e7315ce6240ab306c5f Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Tue, 25 Sep 2018 19:12:34 +0800 +Subject: [PATCH 03/30] sg_opcodes: Fix overrun of array. + +Overrunning array `b` as 4 + m might bigger than the size of array `b`. + +Signed-off-by: Gris Ge +--- + src/sg_opcodes.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/src/sg_opcodes.c b/src/sg_opcodes.c +index 21897c4..a8cf762 100644 +--- a/src/sg_opcodes.c ++++ b/src/sg_opcodes.c +@@ -799,7 +799,8 @@ list_all_codes(uint8_t * rsoc_buff, int rsoc_len, struct opts_t * op, + printf(" usage: "); + else + printf(" cdb usage: "); +- for (m = 0; m < cdb_sz; ++m) ++ for (m = 0; (m < cdb_sz) && ((size_t) (4 + m) < sizeof(b)); ++ ++m) + printf("%.2x ", b[4 + m]); + printf("\n"); + } +-- +1.8.3.1 + + +From ca241cf82c746391edb3b460550310da40202fe4 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 20:34:42 +0800 +Subject: [PATCH 04/30] sg_lib: Fix overruning of array + `sg_lib_scsi_status_sense_arr` + +Check index before dereferencing `mp`. + +Signed-off-by: Gris Ge +--- + include/sg_lib_data.h | 2 ++ + lib/sg_lib.c | 3 +++ + lib/sg_lib_data.c | 6 ++++++ + 3 files changed, 11 insertions(+) + +diff --git a/include/sg_lib_data.h b/include/sg_lib_data.h +index a870043..9739453 100644 +--- a/include/sg_lib_data.h ++++ b/include/sg_lib_data.h +@@ -122,6 +122,8 @@ extern struct sg_lib_simple_value_name_t sg_lib_nvme_nvm_cmd_arr[]; + extern struct sg_lib_value_name_t sg_lib_nvme_cmd_status_arr[]; + extern struct sg_lib_4tuple_u8 sg_lib_scsi_status_sense_arr[]; + ++size_t sg_lib_scsi_status_sense_arr_len(void); ++ + extern struct sg_value_2names_t sg_exit_str_arr[]; + + #ifdef __cplusplus +diff --git a/lib/sg_lib.c b/lib/sg_lib.c +index c2c5891..c281cce 100644 +--- a/lib/sg_lib.c ++++ b/lib/sg_lib.c +@@ -2585,6 +2585,9 @@ sg_nvme_status2scsi(uint16_t sct_sc, uint8_t * status_p, uint8_t * sk_p, + return false; + } else if (ind >= k) + return false; ++ /* Check whether `ind` is out of index of sg_lib_scsi_status_sense_arr */ ++ if (ind >= (int) sg_lib_scsi_status_sense_arr_len()) ++ return false; + mp = sg_lib_scsi_status_sense_arr + ind; + if (status_p) + *status_p = mp->t1; +diff --git a/lib/sg_lib_data.c b/lib/sg_lib_data.c +index d5ca380..3a898e5 100644 +--- a/lib/sg_lib_data.c ++++ b/lib/sg_lib_data.c +@@ -1850,3 +1850,9 @@ struct sg_value_2names_t sg_exit_str_arr[] = { + }; + + #endif /* (SG_SCSI_STRINGS && HAVE_NVME && (! IGNORE_NVME)) */ ++ ++size_t sg_lib_scsi_status_sense_arr_len(void) ++{ ++ return sizeof(sg_lib_scsi_status_sense_arr)/ ++ sizeof(struct sg_lib_4tuple_u8) - 1; ++} +-- +1.8.3.1 + + +From 36a487285d9e7c9afce9acaefa8fad25017cacd8 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Fri, 28 Sep 2018 20:56:26 +0800 +Subject: [PATCH 05/30] sginfo,sg_dd: Fix resource leak. + + * sginfo: Free the memory of `headsp`. + * sg_dd: Close infd/outfd before return error. + +Signed-off-by: Gris Ge +--- + src/sg_dd.c | 6 ++++++ + src/sginfo.c | 1 + + 2 files changed, 7 insertions(+) + +diff --git a/src/sg_dd.c b/src/sg_dd.c +index edd8f9c..6bdbcdb 100644 +--- a/src/sg_dd.c ++++ b/src/sg_dd.c +@@ -1276,6 +1276,7 @@ open_if(const char * inf, int64_t skip, int bpt, struct flags_t * ifp, + perror(ME "SG_SET_RESERVED_SIZE error"); + res = ioctl(infd, SG_GET_VERSION_NUM, &t); + if ((res < 0) || (t < 30000)) { ++ close(infd); + if (FT_BLOCK & *in_typep) + pr2serr(ME "SG_IO unsupported on this block device\n"); + else +@@ -1308,6 +1309,7 @@ open_if(const char * inf, int64_t skip, int bpt, struct flags_t * ifp, + snprintf(ebuff, EBUFF_SZ, ME "couldn't skip to " + "required position on %s", inf); + perror(ebuff); ++ close(infd); + goto file_err; + } + if (vb) +@@ -1341,6 +1343,7 @@ open_if(const char * inf, int64_t skip, int bpt, struct flags_t * ifp, + file_err: + return -SG_LIB_FILE_ERROR; + other_err: ++ close(infd); + return -SG_LIB_CAT_OTHER; + } + +@@ -1398,6 +1401,7 @@ open_of(const char * outf, int64_t seek, int bpt, struct flags_t * ofp, + perror(ME "SG_SET_RESERVED_SIZE error"); + res = ioctl(outfd, SG_GET_VERSION_NUM, &t); + if ((res < 0) || (t < 30000)) { ++ close(outfd); + pr2serr(ME "sg driver prior to 3.x.y\n"); + goto file_err; + } +@@ -1447,6 +1451,7 @@ open_of(const char * outf, int64_t seek, int bpt, struct flags_t * ofp, + snprintf(ebuff, EBUFF_SZ, + ME "couldn't seek to required position on %s", outf); + perror(ebuff); ++ close(outfd); + goto file_err; + } + if (vb) +@@ -1469,6 +1474,7 @@ open_of(const char * outf, int64_t seek, int bpt, struct flags_t * ofp, + file_err: + return -SG_LIB_FILE_ERROR; + other_err: ++ close(outfd); + return -SG_LIB_CAT_OTHER; + } + +diff --git a/src/sginfo.c b/src/sginfo.c +index bddc964..1032f05 100644 +--- a/src/sginfo.c ++++ b/src/sginfo.c +@@ -1825,6 +1825,7 @@ trytenbyte: + } + } + printf("\n"); ++ free(headsp); + return status; + } + +-- +1.8.3.1 + + +From 5bd764553056b2182db8ef8d6c1a1ab09b0d5a24 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 21:10:23 +0800 +Subject: [PATCH 06/30] covscan: Calling func without checking return value + +* Use the macro `_ignore_return()` defined in `misc.h` to ignore the + return value of functions. + +Signed-off-by: Gris Ge +--- + src/misc.h | 34 ++++++++++++++++++++++++++++++++++ + src/sg_get_config.c | 6 ++++-- + src/sg_logs.c | 6 ++++-- + src/sg_persist.c | 13 +++++++++---- + src/sg_xcopy.c | 23 +++++++++++++---------- + 5 files changed, 64 insertions(+), 18 deletions(-) + create mode 100644 src/misc.h + +diff --git a/src/misc.h b/src/misc.h +new file mode 100644 +index 0000000..6289eae +--- /dev/null ++++ b/src/misc.h +@@ -0,0 +1,34 @@ ++/* ++ * Copyright (c) 2018 Red Hat, Inc. ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE ++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ++ * SUCH DAMAGE. ++ * ++ * Author: Gris Ge ++ */ ++#ifndef __SG_UTILS_MISC_H__ ++#define __SG_UTILS_MISC_H__ ++ ++/* Just make coverity scan happy. */ ++#define _ignore_return(x) if (x) {} ++ ++#endif /* End of __SG_UTILS_MISC_H__ */ +diff --git a/src/sg_get_config.c b/src/sg_get_config.c +index 28af720..4d2cc9b 100644 +--- a/src/sg_get_config.c ++++ b/src/sg_get_config.c +@@ -24,6 +24,8 @@ + #include "sg_unaligned.h" + #include "sg_pr2serr.h" + ++#include "misc.h" ++ + /* A utility program originally written for the Linux OS SCSI subsystem. + * + * This program outputs information provided by a SCSI "Get Configuration" +@@ -1091,7 +1093,7 @@ main(int argc, char * argv[]) + pr2serr(ME "%s doesn't respond to a SCSI INQUIRY\n", device_name); + return SG_LIB_CAT_OTHER; + } +- sg_cmds_close_device(sg_fd); ++ _ignore_return(sg_cmds_close_device(sg_fd)); + + sg_fd = sg_cmds_open_device(device_name, readonly, verbose); + if (sg_fd < 0) { +@@ -1122,7 +1124,7 @@ main(int argc, char * argv[]) + } else { + char b[80]; + +- sg_get_category_sense_str(res, sizeof(b), b, verbose); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(b), b, verbose)); + pr2serr("Get Configuration command: %s\n", b); + if (0 == verbose) + pr2serr(" try '-v' option for more information\n"); +diff --git a/src/sg_logs.c b/src/sg_logs.c +index 61443ff..e4f265e 100644 +--- a/src/sg_logs.c ++++ b/src/sg_logs.c +@@ -34,6 +34,8 @@ + #include "sg_unaligned.h" + #include "sg_pr2serr.h" + ++#include "misc.h" ++ + static const char * version_str = "1.69 20180911"; /* spc5r19 + sbc4r11 */ + + #define MX_ALLOC_LEN (0xfffc) +@@ -6776,7 +6778,7 @@ fetchTemperature(int sg_fd, uint8_t * resp, int max_len, struct opts_t * op) + pr2serr("Unable to find temperature in either Temperature or " + "IE log page\n"); + } +- sg_cmds_close_device(sg_fd); ++ _ignore_return(sg_cmds_close_device(sg_fd)); + return (res >= 0) ? res : SG_LIB_CAT_OTHER; + } + +@@ -7246,7 +7248,7 @@ err_out: + if (free_parr) + free(free_parr); + if (sg_fd >= 0) +- sg_cmds_close_device(sg_fd); ++ _ignore_return(sg_cmds_close_device(sg_fd)); + if (0 == vb) { + if (! sg_if_can2stderr("sg_logs failed: ", ret)) + pr2serr("Some error occurred, try again with '-v' or '-vv' for " +diff --git a/src/sg_persist.c b/src/sg_persist.c +index b565a5a..2e10aff 100644 +--- a/src/sg_persist.c ++++ b/src/sg_persist.c +@@ -33,6 +33,8 @@ + #include "sg_unaligned.h" + #include "sg_pr2serr.h" + ++#include "misc.h" ++ + static const char * version_str = "0.66 20180615"; + + +@@ -303,7 +305,8 @@ prin_work(int sg_fd, const struct opts_t * op) + pr2serr("PR in (%s): bad field in cdb or parameter list (perhaps " + "unsupported service action)\n", b); + else { +- sg_get_category_sense_str(res, sizeof(bb), bb, op->verbose); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(bb), bb, ++ op->verbose)); + pr2serr("PR in (%s): %s\n", b, bb); + } + goto fini; +@@ -519,7 +522,8 @@ prout_work(int sg_fd, struct opts_t * op) + pr2serr("PR out (%s): bad field in cdb or parameter list " + "(perhaps unsupported service action)\n", b); + else { +- sg_get_category_sense_str(res, sizeof(bb), bb, op->verbose); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(bb), bb, ++ op->verbose)); + pr2serr("PR out (%s): %s\n", b, bb); + } + goto fini; +@@ -573,7 +577,8 @@ prout_reg_move_work(int sg_fd, struct opts_t * op) + else { + char bb[80]; + +- sg_get_category_sense_str(res, sizeof(bb), bb, op->verbose); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(bb), bb, ++ op->verbose)); + pr2serr("PR out (register and move): %s\n", bb); + } + goto fini; +@@ -1277,7 +1282,7 @@ main(int argc, char * argv[]) + flagged = true; + goto fini; + } +- sg_cmds_close_device(sg_fd); ++ _ignore_return(sg_cmds_close_device(sg_fd)); + } + + if (! op->readwrite_force) { +diff --git a/src/sg_xcopy.c b/src/sg_xcopy.c +index 5facfc8..6230685 100644 +--- a/src/sg_xcopy.c ++++ b/src/sg_xcopy.c +@@ -67,6 +67,8 @@ + #include "sg_unaligned.h" + #include "sg_pr2serr.h" + ++#include "misc.h" ++ + static const char * version_str = "0.68 20180811"; + + #define ME "sg_xcopy: " +@@ -341,7 +343,7 @@ open_sg(struct xcopy_fp_t * fp, int vb) + } + if (sg_simple_inquiry(fp->sg_fd, &sir, false, vb)) { + pr2serr("INQUIRY failed on %s\n", ebuff); +- sg_cmds_close_device(fp->sg_fd); ++ _ignore_return(sg_cmds_close_device(fp->sg_fd)); + fp->sg_fd = -1; + return -1; + } +@@ -415,7 +417,7 @@ dd_filetype_str(int ft, char * buff) + if (FT_OTHER & ft) + off += sg_scnpr(buff + off, 32, "other (perhaps ordinary file) "); + if (FT_ERROR & ft) +- sg_scnpr(buff + off, 32, "unable to 'stat' file "); ++ _ignore_return(sg_scnpr(buff + off, 32, "unable to 'stat' file ")); + return buff; + } + +@@ -640,7 +642,7 @@ scsi_extended_copy(int sg_fd, uint8_t list_id, + DEF_GROUP_NUM, DEF_3PC_OUT_TIMEOUT, + xcopyBuff, desc_offset, true, verb); + if (res) { +- sg_get_category_sense_str(res, sizeof(b), b, verb); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(b), b, verb)); + pr2serr("Xcopy(LID1): %s\n", b); + } + return res; +@@ -660,7 +662,7 @@ scsi_read_capacity(struct xcopy_fp_t *xfp) + res = sg_ll_readcap_10(xfp->sg_fd, false /* pmi */, 0, rcBuff, + READ_CAP_REPLY_LEN, true, verb); + if (0 != res) { +- sg_get_category_sense_str(res, sizeof(b), b, verb); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(b), b, verb)); + pr2serr("Read capacity(10): %s\n", b); + return res; + } +@@ -672,7 +674,7 @@ scsi_read_capacity(struct xcopy_fp_t *xfp) + res = sg_ll_readcap_16(xfp->sg_fd, false /* pmi */, 0, rcBuff, + RCAP16_REPLY_LEN, true, verb); + if (0 != res) { +- sg_get_category_sense_str(res, sizeof(b), b, verb); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(b), b, verb)); + pr2serr("Read capacity(16): %s\n", b); + return res; + } +@@ -714,7 +716,7 @@ scsi_operating_parameter(struct xcopy_fp_t *xfp, int is_target) + res = sg_ll_receive_copy_results(xfp->sg_fd, SA_COPY_OP_PARAMS, 0, rcBuff, + rcBuffLen, true, verb); + if (0 != res) { +- sg_get_category_sense_str(res, sizeof(b), b, verb); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(b), b, verb)); + pr2serr("Xcopy operating parameters: %s\n", b); + return -res; + } +@@ -1006,8 +1008,8 @@ decode_designation_descriptor(const uint8_t * bp, int i_len) + { + char c[2048]; + +- sg_get_designation_descriptor_str(NULL, bp, i_len, 1, verbose, +- sizeof(c), c); ++ _ignore_return(sg_get_designation_descriptor_str(NULL, bp, i_len, 1, ++ verbose, sizeof(c), c)); + pr2serr("%s", c); + } + +@@ -1029,7 +1031,8 @@ desc_from_vpd_id(int sg_fd, uint8_t *desc, int desc_len, + if (SG_LIB_CAT_ILLEGAL_REQ == res) + pr2serr("Device identification VPD page not found\n"); + else { +- sg_get_category_sense_str(res, sizeof(b), b, verbose); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(b), b, ++ verbose)); + pr2serr("VPD inquiry (Device ID): %s\n", b); + pr2serr(" try again with '-vv'\n"); + } +@@ -1042,7 +1045,7 @@ desc_from_vpd_id(int sg_fd, uint8_t *desc, int desc_len, + res = sg_ll_inquiry(sg_fd, false, true, VPD_DEVICE_ID, rcBuff, len, true, + verb); + if (0 != res) { +- sg_get_category_sense_str(res, sizeof(b), b, verbose); ++ _ignore_return(sg_get_category_sense_str(res, sizeof(b), b, verbose)); + pr2serr("VPD inquiry (Device ID): %s\n", b); + return res; + } else if (rcBuff[1] != VPD_DEVICE_ID) { +-- +1.8.3.1 + + +From 3a99f93d11cea7d4273477c698eb6bfb2f6d4696 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:14:11 +0800 +Subject: [PATCH 07/30] sg_dd: flock does not allows negative fd. + + * The `outfd` could be -1 in line 1408. We do negative number check on + `outfd` before sending to flock. + +Signed-off-by: Gris Ge +--- + src/sg_dd.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/sg_dd.c b/src/sg_dd.c +index 6bdbcdb..8696ee7 100644 +--- a/src/sg_dd.c ++++ b/src/sg_dd.c +@@ -1459,7 +1459,7 @@ open_of(const char * outf, int64_t seek, int bpt, struct flags_t * ofp, + "\n", (uint64_t)offset); + } + } +- if (ofp->flock) { ++ if ((ofp->flock) && (outfd >= 0)) { + res = flock(outfd, LOCK_EX | LOCK_NB); + if (res < 0) { + close(outfd); +-- +1.8.3.1 + + +From 158f6547f156b8a7fc175904b4bd502642ed56a5 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:21:00 +0800 +Subject: [PATCH 08/30] sginfo: Suspend the fallthrough warning. + +* The GCC and Clang will complain about fallthrough of switch statement, + use maker comments to suspend that. + +Signed-off-by: Gris Ge +--- + src/sginfo.c | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/src/sginfo.c b/src/sginfo.c +index 1032f05..9c626ee 100644 +--- a/src/sginfo.c ++++ b/src/sginfo.c +@@ -1757,6 +1757,7 @@ trytenbyte: + } + else if (!sorthead) printf("|"); + } ++ /* fall through */ + case 5: /* physical sector */ + while (len > 0) { + snprintf((char *)cbuffer1, 40, "%6d:%2u:%5d", +@@ -1775,6 +1776,7 @@ trytenbyte: + } + else if (!sorthead) printf("|"); + } ++ /* fall through */ + case 0: /* lba (32 bit) */ + while (len > 0) { + printf("%10d", getnbyte(df, 4)); +@@ -1788,6 +1790,7 @@ trytenbyte: + else + printf("|"); + } ++ /* fall through */ + case 3: /* lba (64 bit) */ + while (len > 0) { + printf("%15" PRId64 , getnbyte_ll(df, 8)); +-- +1.8.3.1 + + +From 7e90f135eeb3900735847df32ed878d8207c59dc Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:24:01 +0800 +Subject: [PATCH 09/30] sg_get_lba_status: Fix incorrect use of + sg_ll_get_lba_status32. + +Fix the incorrect argument order of `sg_get_lba_status()`. + +Signed-off-by: Gris Ge +--- + src/sg_get_lba_status.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/sg_get_lba_status.c b/src/sg_get_lba_status.c +index 91c7a96..61a823b 100644 +--- a/src/sg_get_lba_status.c ++++ b/src/sg_get_lba_status.c +@@ -340,7 +340,7 @@ main(int argc, char * argv[]) + res = sg_ll_get_lba_status16(sg_fd, lba, rt, glbasBuffp, maxlen, true, + verbose); + else if (do_32) /* keep analyser happy since do_32 must be true */ +- res = sg_ll_get_lba_status32(sg_fd, lba, element_id, scan_len, rt, ++ res = sg_ll_get_lba_status32(sg_fd, lba, scan_len, element_id, rt, + glbasBuffp, maxlen, true, verbose); + + ret = res; +-- +1.8.3.1 + + +From c86a7be69c8601722ba39ef6eacc6aaa993b3d5a Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:35:35 +0800 +Subject: [PATCH 10/30] rescan-scsi-bus.sh: Fix shellcheck warning of SC2155. + +Declare and assign separately to avoid masking return values: + https://github.com/koalaman/shellcheck/wiki/SC2155 + +Signed-off-by: Gris Ge +--- + scripts/rescan-scsi-bus.sh | 24 ++++++++++++++++-------- + 1 file changed, 16 insertions(+), 8 deletions(-) + +diff --git a/scripts/rescan-scsi-bus.sh b/scripts/rescan-scsi-bus.sh +index 6989208..75e169a 100755 +--- a/scripts/rescan-scsi-bus.sh ++++ b/scripts/rescan-scsi-bus.sh +@@ -314,8 +314,10 @@ testonline () + fi + else + # Ignore disk revision change +- local old_str_no_rev=`echo "$TMPSTR" | sed -e 's/.\{4\}$//'` +- local new_str_no_rev=`echo "$STR" | sed -e 's/.\{4\}$//'` ++ local old_str_no_rev ++ old_str_no_rev=`echo "$TMPSTR" | sed -e 's/.\{4\}$//'` ++ local new_str_no_rev ++ new_str_no_rev=`echo "$STR" | sed -e 's/.\{4\}$//'` + if [ "$old_str_no_rev" != "$new_str_no_rev" ]; then + echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${SCSISTR#* } \nto: $STR ${norm} \n\n\n" + return 1 +@@ -696,7 +698,8 @@ searchexisting() + local tmpch; + local tmpid + local match=0 +- local targets=`ls -d /sys/class/scsi_device/$host:* 2> /dev/null | egrep -o $host:[0-9]+:[0-9]+ | sort | uniq` ++ local targets ++ targets=`ls -d /sys/class/scsi_device/$host:* 2> /dev/null | egrep -o $host:[0-9]+:[0-9]+ | sort | uniq` + + # Nothing came back on this host, so we should skip it + test -z "$targets" && return +@@ -742,13 +745,15 @@ searchexisting() + findremapped() + { + local hctl=; +- local devs=`ls /sys/class/scsi_device/` ++ local devs ++ devs=`ls /sys/class/scsi_device/` + local sddev= + local id_serial= + local id_serial_old= + local remapped= + mpaths="" +- local tmpfile=$(mktemp /tmp/rescan-scsi-bus.XXXXXXXX 2> /dev/null) ++ local tmpfile ++ tmpfile=$(mktemp /tmp/rescan-scsi-bus.XXXXXXXX 2> /dev/null) + + if [ -z "$tmpfile" ] ; then + tmpfile="/tmp/rescan-scsi-bus.$$" +@@ -835,7 +840,8 @@ incrchgd() + fi + + if test -n "$mp_enable" ; then +- local sdev="`findsddev \"$hctl\"`" ++ local sdev ++ sdev="`findsddev \"$hctl\"`" + if test -n "$sdev" ; then + findmultipath "$sdev" + fi +@@ -853,7 +859,8 @@ incrrmvd() + fi + + if test -n "$mp_enable" ; then +- local sdev="`findsddev \"$hctl\"`" ++ local sdev ++ sdev="`findsddev \"$hctl\"`" + if test -n "$sdev" ; then + findmultipath "$sdev" + fi +@@ -902,7 +909,8 @@ findmultipath() + return 1 + fi + +- local maj_min=`cat /sys/block/$dev/dev` ++ local maj_min ++ maj_min=`cat /sys/block/$dev/dev` + for mp in $($DMSETUP ls --target=multipath | cut -f 1) ; do + [ "$mp" = "No" ] && break; + if $DMSETUP status $mp | grep -q " $maj_min "; then +-- +1.8.3.1 + + +From 0185fcb6527b331082eb10ef733a2a2f746578d8 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:36:44 +0800 +Subject: [PATCH 11/30] rescan-scsi-bus.sh: Fix incorrect use of `break`. + +Should use `return` instead in `if` code block. + +Signed-off-by: Gris Ge +--- + scripts/rescan-scsi-bus.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/scripts/rescan-scsi-bus.sh b/scripts/rescan-scsi-bus.sh +index 75e169a..37f121d 100755 +--- a/scripts/rescan-scsi-bus.sh ++++ b/scripts/rescan-scsi-bus.sh +@@ -548,7 +548,7 @@ dolunscan() + printf "\r\e[A"; + # Optimization: if lun==0, stop here (only if in non-remove mode) + if test $lun = 0 -a -z "$remove" -a $optscan = 1; then +- break; ++ return; + fi + else + if test "$remappedlun0" != "2" ; then +-- +1.8.3.1 + + +From 533e455337251971a94b5d9bce2183fb55383db6 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:39:13 +0800 +Subject: [PATCH 12/30] rescan-scsi-bus.sh: Use dummy for throwaway variable. + +* The `offset` is unused and should be replaced by dummy `_`. + https://github.com/koalaman/shellcheck/wiki/SC2034 + +Signed-off-by: Gris Ge +--- + scripts/rescan-scsi-bus.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/scripts/rescan-scsi-bus.sh b/scripts/rescan-scsi-bus.sh +index 37f121d..ed3cf49 100755 +--- a/scripts/rescan-scsi-bus.sh ++++ b/scripts/rescan-scsi-bus.sh +@@ -235,7 +235,7 @@ is_removable () + p=/sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/inquiry + # Extract the second byte of the INQUIRY response and check bit 7 (mask 0x80). + b=$(od -tx1 -j1 -N1 "$p" 2>/dev/null | +- { read -r offset byte rest; echo -n "$byte"; }) ++ { read -r _ byte rest; echo -n "$byte"; }) + if [ -n "$b" ]; then + echo $(((0x$b & 0x80) != 0)) + else +-- +1.8.3.1 + + +From 751afef7a7a5049a6d1a6171efb65e9e2f515911 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:55:08 +0800 +Subject: [PATCH 13/30] sg_write_x: parameter string might overflow a char + array. + + * The `lcp` might overflow the char array `c`. Use `snprintf` instead. + +Signed-off-by: Gris Ge +--- + src/sg_write_x.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +diff --git a/src/sg_write_x.c b/src/sg_write_x.c +index 3b8f091..89b5616 100644 +--- a/src/sg_write_x.c ++++ b/src/sg_write_x.c +@@ -671,8 +671,10 @@ parse_scat_pi_line(const char * lcp, uint8_t * up, uint32_t * sum_num) + if (cp) { /* copy from first non whitespace ... */ + memcpy(c, lcp, cp - lcp); /* ... to just prior to first '#' */ + c[cp - lcp] = '\0'; +- } else +- strcpy(c, lcp); /* ... to end of line, including null */ ++ } else { ++ /* ... to end of line, including null */ ++ snprintf(c, sizeof(c)/sizeof(char), "%s", lcp); ++ } + ll = sg_get_llnum(bp); + ok = ((-1 != ll) || all_ascii_f_s(bp, 16)); + if (! ok) { +-- +1.8.3.1 + + +From cd7fdbdeffabd41fe9e9c65e1158cbdb6f906f20 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 22:56:48 +0800 +Subject: [PATCH 14/30] sg_vpd_vendor: Fix potential string overflow. + +Currently, none of `vendor_vpd_pg` name string is longer than 64, +to ease the coverity scan, change strcpy to snprintf. + +Signed-off-by: Gris Ge +--- + src/sg_vpd_vendor.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/sg_vpd_vendor.c b/src/sg_vpd_vendor.c +index 3c75177..9a73748 100644 +--- a/src/sg_vpd_vendor.c ++++ b/src/sg_vpd_vendor.c +@@ -1420,7 +1420,7 @@ svpd_decode_vendor(int sg_fd, struct opts_t * op, int off) + if (0 == res) { + vnp = svpd_get_v_detail(op->vpd_pn, op->vend_prod_num, 0xf & rp[0]); + if (vnp && vnp->name) +- strcpy(name, vnp->name); ++ snprintf(name, sizeof(name)/sizeof(char), "%s", vnp->name); + else + snprintf(name, sizeof(name) - 1, "Vendor VPD page=0x%x", + op->vpd_pn); +-- +1.8.3.1 + + +From 7ddd2de9d7c7ebcfcb3c33da9993cb60a91b0525 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 23:38:05 +0800 +Subject: [PATCH 15/30] sg_write_x: Remove dead code. + +* The `k` is always smaller than 3, `default:` will never be reached. +* The `ok` is already checked for non-zero. + +Signed-off-by: Gris Ge +--- + src/sg_write_x.c | 10 +--------- + 1 file changed, 1 insertion(+), 9 deletions(-) + +diff --git a/src/sg_write_x.c b/src/sg_write_x.c +index 89b5616..d6949ed 100644 +--- a/src/sg_write_x.c ++++ b/src/sg_write_x.c +@@ -750,10 +750,6 @@ parse_scat_pi_line(const char * lcp, uint8_t * up, uint32_t * sum_num) + } else if (up) + sg_put_unaligned_be16((uint16_t)ll, up + 18); + break; +- default: +- pr2serr("%s: k=%d should not be >= 3\n", __func__, k); +- ok = false; +- break; + } + if (! ok) + break; +@@ -774,13 +770,9 @@ parse_scat_pi_line(const char * lcp, uint8_t * up, uint32_t * sum_num) + if (up) + sg_put_unaligned_be16((uint16_t)DEF_TM, up + 18); + break; +- default: +- pr2serr("%s: k=%d should not be >= 3\n", __func__, k); +- ok = false; +- break; + } + } +- return ok ? 0 : SG_LIB_SYNTAX_ERROR; ++ return 0; + } + + /* Read pairs or quintets from a scat_file and places them in a T10 scatter +-- +1.8.3.1 + + +From 2ff6254d584b2c673b9d6289da2f6af6e293a3d3 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 23:36:58 +0800 +Subject: [PATCH 16/30] sg_vpd: Remove dead code. + + * The `n` is between 0 and 7, the `default` statement is never reached. + + * The `do_hex` will never been bigger than 2 at that line. + +Signed-off-by: Gris Ge +--- + src/sg_vpd.c | 7 ------- + 1 file changed, 7 deletions(-) + +diff --git a/src/sg_vpd.c b/src/sg_vpd.c +index a15ed74..081232d 100644 +--- a/src/sg_vpd.c ++++ b/src/sg_vpd.c +@@ -1233,9 +1233,6 @@ decode_x_inq_vpd(uint8_t * b, int len, int do_hex, bool do_long, + case 7: + printf(" [protection types 1, 2 and 3 supported]\n"); + break; +- default: +- printf("\n"); +- break; + } + } else + printf("\n"); +@@ -1991,8 +1988,6 @@ decode_proto_lu_vpd(uint8_t * buff, int len, int do_hex) + continue; + if (2 == do_hex) + hex2stdout(bp + 8, desc_len, 1); +- else if (do_hex > 2) +- hex2stdout(bp, bump, 1); + else { + switch (proto) { + case TPROTO_SAS: +@@ -2042,8 +2037,6 @@ decode_proto_port_vpd(uint8_t * buff, int len, int do_hex) + continue; + if (2 == do_hex) + hex2stdout(bp + 8, desc_len, 1); +- else if (do_hex > 2) +- hex2stdout(bp, bump, 1); + else { + switch (proto) { + case TPROTO_SAS: /* page added in spl3r02 */ +-- +1.8.3.1 + + +From 013eb336d61d56eb7dc3c67b6551096a8175527a Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 23:41:46 +0800 +Subject: [PATCH 17/30] sg_test_rwbuf: Fix incorrect initial value of + `version_given`. + +* With current code, no real code could be execute as + `version_give` is always true(if not in debug mode). + +Signed-off-by: Gris Ge +--- + src/sg_test_rwbuf.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/src/sg_test_rwbuf.c b/src/sg_test_rwbuf.c +index f187ba0..52b7e81 100644 +--- a/src/sg_test_rwbuf.c ++++ b/src/sg_test_rwbuf.c +@@ -386,8 +386,8 @@ void usage () + + int main (int argc, char * argv[]) + { +- bool verbose_given = true; +- bool version_given = true; ++ bool verbose_given = false; ++ bool version_given = false; + int sg_fd, res; + const char * device_name = NULL; + int times = 1; +-- +1.8.3.1 + + +From bf1ee2b1ecc966f50b19bec4126a58b3c4c53111 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Wed, 26 Sep 2018 23:53:52 +0800 +Subject: [PATCH 18/30] sg_ses: Remove dead code. + +* The `n` is always '>= 1' after the for loop. +* All the possible value between 0x20 to 0x2f is covered by preview + switch statements. +* The cp is pointing to a stack memory, is always not NULL. + +Signed-off-by: Gris Ge +--- + src/sg_ses.c | 11 +---------- + 1 file changed, 1 insertion(+), 10 deletions(-) + +diff --git a/src/sg_ses.c b/src/sg_ses.c +index 29b66b3..9c4b0c0 100644 +--- a/src/sg_ses.c ++++ b/src/sg_ses.c +@@ -1405,9 +1405,6 @@ parse_cmd_line(struct opts_t *op, int argc, char *argv[]) + else if (1 == n) { + op->page_code_given = true; + op->page_code = pc; +- } else { +- pr2serr("No dpage found --data= argument\n"); +- goto err_help; + } + if (op->verbose > 3) { + int k; +@@ -2431,9 +2428,6 @@ find_sas_connector_type(int conn_type, bool abridged, char * buff, + else if (conn_type < 0x20) + snprintf(buff, buff_len, "unknown internal wide connector type: " + "0x%x", conn_type); +- else if (conn_type < 0x30) +- snprintf(buff, buff_len, "unknown internal connector to end " +- "device, type: 0x%x", conn_type); + else if (conn_type < 0x3f) + snprintf(buff, buff_len, "reserved for internal connector, " + "type: 0x%x", conn_type); +@@ -2637,8 +2631,6 @@ enc_status_helper(const char * pad, const uint8_t * statp, int etype, + printf("%slast 3 bytes (hex): %02x %02x %02x\n", pad, statp[1], + statp[2], statp[3]); + break; +- default: +- break; + } + break; + case UI_POWER_SUPPLY_ETC: /* Uninterruptible power supply */ +@@ -4260,8 +4252,7 @@ process_status_dpage(struct sg_pt_base * ptvp, int page_code, uint8_t * resp, + subenc_nickname_sdg(resp, resp_len); + break; + default: +- printf("Cannot decode response from diagnostic " +- "page: %s\n", (cp ? cp : "")); ++ printf("Cannot decode response from diagnostic page: %s\n", cp); + hex2stdout(resp, resp_len, 0); + } + +-- +1.8.3.1 + + +From d1a53f72716e0013c6ff4e76c4ccae575e32e35d Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:07:56 +0800 +Subject: [PATCH 19/30] sg_sanitize: Remove dead code. + + * The `has_di` will always be 0 at that line. + +Signed-off-by: Gris Ge +--- + src/sg_sanitize.c | 5 ----- + 1 file changed, 5 deletions(-) + +diff --git a/src/sg_sanitize.c b/src/sg_sanitize.c +index b45462f..b810128 100644 +--- a/src/sg_sanitize.c ++++ b/src/sg_sanitize.c +@@ -388,11 +388,6 @@ print_dev_id(int fd, uint8_t * sinq_resp, int max_rlen, int verbose) + n = (SAFE_STD_INQ_RESP_LEN - 4); + for (k = 0, has_sn = 0, has_di = 0; k < n; ++k) { + if (VPD_UNIT_SERIAL_NUM == b[4 + k]) { +- if (has_di) { +- if (verbose) +- pr2serr("VPD_SUPPORTED_VPDS dis-ordered\n"); +- return 0; +- } + ++has_sn; + } else if (VPD_DEVICE_ID == b[4 + k]) { + ++has_di; +-- +1.8.3.1 + + +From 880d18e2e0296a91a65f7f94dcd8ad5e2497cfa6 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:09:08 +0800 +Subject: [PATCH 20/30] sg_rbuf: Remove dead code. + +The `res` is always >=0 at that line. + +Signed-off-by: Gris Ge +--- + src/sg_rbuf.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/sg_rbuf.c b/src/sg_rbuf.c +index 61604d3..6b74436 100644 +--- a/src/sg_rbuf.c ++++ b/src/sg_rbuf.c +@@ -681,5 +681,5 @@ main(int argc, char * argv[]) + else + printf("read buffer non-zero\n"); + #endif +- return (res >= 0) ? res : SG_LIB_CAT_OTHER; ++ return res; + } +-- +1.8.3.1 + + +From d58bc5904989a381b9ab541409b83578a56b75da Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:17:07 +0800 +Subject: [PATCH 21/30] sg_luns: Remove dead code. + +The `a_method` is always between 0 and 3. + +Signed-off-by: Gris Ge +--- + src/sg_luns.c | 3 --- + 1 file changed, 3 deletions(-) + +diff --git a/src/sg_luns.c b/src/sg_luns.c +index 904b2ce..9115070 100644 +--- a/src/sg_luns.c ++++ b/src/sg_luns.c +@@ -306,9 +306,6 @@ decode_lun(const char * leadin, const uint8_t * lunp, bool lu_cong, + } + } + break; +- default: +- printf("%s<<%s: faulty logic>>\n", l_leadin, __func__); +- break; + } + if (next_level) + continue; +-- +1.8.3.1 + + +From 601fe8621fa0fb1d2674d67181dd368936354cb4 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:18:57 +0800 +Subject: [PATCH 22/30] sg_logs: Fix typo in variable name. + +Signed-off-by: Gris Ge +--- + src/sg_logs.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/sg_logs.c b/src/sg_logs.c +index e4f265e..7001ee4 100644 +--- a/src/sg_logs.c ++++ b/src/sg_logs.c +@@ -7109,7 +7109,7 @@ main(int argc, char * argv[]) + if (k) { + if (SG_LIB_CAT_NOT_READY == k) + pr2serr("log_select: device not ready\n"); +- else if (SG_LIB_CAT_ILLEGAL_REQ == res) ++ else if (SG_LIB_CAT_ILLEGAL_REQ == k) + pr2serr("log_select: field in cdb illegal\n"); + else if (SG_LIB_CAT_INVALID_OP == k) + pr2serr("log_select: not supported\n"); +-- +1.8.3.1 + + +From e921a23e89f91b50929e9f4dc2f5902021f689d9 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:19:40 +0800 +Subject: [PATCH 23/30] sg_inq: Remove dead code. + +The `support_num` is always between 0 and 7. + +Signed-off-by: Gris Ge +--- + src/sg_inq.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/src/sg_inq.c b/src/sg_inq.c +index b32ab87..1664345 100644 +--- a/src/sg_inq.c ++++ b/src/sg_inq.c +@@ -3428,7 +3428,6 @@ cmddt_process(int sg_fd, const struct opts_t * op) + break; + case 6: desc_p = "vendor specific (6)"; break; + case 7: desc_p = "reserved (7)"; break; +- default: desc_p = "impossible value > 7"; break; + } + if (prnt_cmd) { + printf(" Support field: %s [", desc_p); +-- +1.8.3.1 + + +From 27a19f00c6c58e91296e918a34afb2b2bdcac822 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:20:32 +0800 +Subject: [PATCH 24/30] sg_format: Remove dead code. + +The `has_di` is always 0 in that line. + +Signed-off-by: Gris Ge +--- + src/sg_format.c | 6 ------ + 1 file changed, 6 deletions(-) + +diff --git a/src/sg_format.c b/src/sg_format.c +index af1a033..61ee77f 100644 +--- a/src/sg_format.c ++++ b/src/sg_format.c +@@ -700,12 +700,6 @@ print_dev_id(int fd, uint8_t * sinq_resp, int max_rlen, + n = (SAFE_STD_INQ_RESP_LEN - 4); + for (k = 0, has_sn = 0, has_di = 0; k < n; ++k) { + if (VPD_UNIT_SERIAL_NUM == b[4 + k]) { +- if (has_di) { +- if (op->verbose) +- pr2serr("VPD_SUPPORTED_VPDS " +- "dis-ordered\n"); +- goto out; +- } + ++has_sn; + } else if (VPD_DEVICE_ID == b[4 + k]) { + ++has_di; +-- +1.8.3.1 + + +From 8292e3e96cac1f234f1139161c5e92e29b545da1 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:22:35 +0800 +Subject: [PATCH 25/30] sg_dd: Remove dead code. + +The `ret` there is always non-zero. + +Signed-off-by: Gris Ge +--- + src/sg_dd.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/sg_dd.c b/src/sg_dd.c +index 8696ee7..aa544c7 100644 +--- a/src/sg_dd.c ++++ b/src/sg_dd.c +@@ -976,7 +976,7 @@ err_out: + } + return may_coe ? 0 : ret; + } else +- return ret ? ret : -1; ++ return ret; + } + + +-- +1.8.3.1 + + +From 50ba84424a1226dfef9a2746fd797cffbc544aad Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:23:49 +0800 +Subject: [PATCH 26/30] sg_pt_linux_nvme: Remove dead code. + +The `return 0` already stop the `if (dout_len > 0)` check. + +Signed-off-by: Gris Ge +--- + lib/sg_pt_linux_nvme.c | 5 ----- + 1 file changed, 5 deletions(-) + +diff --git a/lib/sg_pt_linux_nvme.c b/lib/sg_pt_linux_nvme.c +index 18b1374..98feaef 100644 +--- a/lib/sg_pt_linux_nvme.c ++++ b/lib/sg_pt_linux_nvme.c +@@ -899,11 +899,6 @@ sntl_senddiag(struct sg_pt_linux_scsi * ptp, const uint8_t * cdbp, + return 0; + } else + return 0; /* nothing to do */ +- if (dout_len > 0) { +- if (vb) +- pr2ws("%s: dout given but PF clear\n", __func__); +- return SCSI_PT_DO_BAD_PARAMS; +- } + } + if (dout_len < 4) { + if (vb) +-- +1.8.3.1 + + +From 570105df861066e0943fc6a7511172acdeb212c0 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Fri, 28 Sep 2018 19:50:11 +0800 +Subject: [PATCH 27/30] sg_lib: Remove dead code. + +Signed-off-by: Gris Ge +--- + lib/sg_lib.c | 8 +------- + 1 file changed, 1 insertion(+), 7 deletions(-) + +diff --git a/lib/sg_lib.c b/lib/sg_lib.c +index c281cce..e7cac29 100644 +--- a/lib/sg_lib.c ++++ b/lib/sg_lib.c +@@ -2123,14 +2123,11 @@ sg_get_command_size(uint8_t opcode) + switch ((opcode >> 5) & 0x7) { + case 0: + return 6; +- case 1: case 2: case 6: case 7: +- return 10; + case 3: case 5: + return 12; +- break; + case 4: + return 16; +- default: ++ default: /* 1, 2, 6, 7 */ + return 10; + } + } +@@ -2267,9 +2264,6 @@ sg_get_opcode_name(uint8_t cmd_byte0, int peri_type, int buff_len, + case 7: + sg_scnpr(buff, buff_len, "Vendor specific [0x%x]", (int)cmd_byte0); + break; +- default: +- sg_scnpr(buff, buff_len, "Opcode=0x%x", (int)cmd_byte0); +- break; + } + } + +-- +1.8.3.1 + + +From 26932a6b4e5a1e844df3edcef86d399391f4b18c Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Thu, 27 Sep 2018 00:33:00 +0800 +Subject: [PATCH 28/30] sg_vpd: Fix protantially overflowing of uint64_t. + +Signed-off-by: Gris Ge +--- + src/sg_vpd.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/src/sg_vpd.c b/src/sg_vpd.c +index 081232d..2865af4 100644 +--- a/src/sg_vpd.c ++++ b/src/sg_vpd.c +@@ -1929,9 +1929,9 @@ decode_3party_copy_vpd(uint8_t * buff, int len, int do_hex, int pdt, + printf(" Maximum identified concurrent copies: %u\n", u); + u = sg_get_unaligned_be32(bp + 12); + printf(" Maximum segment length: %u\n", u); +- ull = (1 << bp[16]); /* field is power of 2 */ ++ ull = (1 << bp[16]) & UINT64_MAX; /* field is power of 2 */ + printf(" Data segment granularity: %" PRIu64 "\n", ull); +- ull = (1 << bp[17]); ++ ull = (1 << bp[17]) & UINT64_MAX; + printf(" Inline data granularity: %" PRIu64 "\n", ull); + break; + case 0x9101: +@@ -1943,7 +1943,7 @@ decode_3party_copy_vpd(uint8_t * buff, int len, int do_hex, int pdt, + printf(" Held data:\n"); + u = sg_get_unaligned_be32(bp + 4); + printf(" Held data limit: %u\n", u); +- ull = (1 << bp[8]); ++ ull = (1 << bp[8]) & UINT64_MAX; + printf(" Held data granularity: %" PRIu64 "\n", ull); + break; + default: +-- +1.8.3.1 + + +From 5b2e117dee27ec7cebecd042b2d505f2b6dcb461 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Fri, 28 Sep 2018 19:45:26 +0800 +Subject: [PATCH 29/30] sg_lib: Removed dead code. + + * The value 32 stored in `len` is never used afterwords. + * The `bump` initial value is always been overridden. + +Signed-off-by: Gris Ge +--- + lib/sg_lib.c | 4 ---- + 1 file changed, 4 deletions(-) + +diff --git a/lib/sg_lib.c b/lib/sg_lib.c +index e7cac29..a691b02 100644 +--- a/lib/sg_lib.c ++++ b/lib/sg_lib.c +@@ -545,7 +545,6 @@ sg_decode_transportid_str(const char * lip, uint8_t * bp, int bplen, + } + if (NULL == lip) + lip = ""; +- bump = TRANSPORT_ID_MIN_LEN; /* should be overwritten in all loop paths */ + for (k = 0, n = 0; bplen > 0; ++k, bp += bump, bplen -= bump) { + if ((k > 0) && only_one) + break; +@@ -1846,9 +1845,6 @@ sg_get_sense_str(const char * lip, const uint8_t * sbp, int sb_len, + sg_scnpr(b + r, blen - r, "%s lba=0x%x\n", lip, + sg_get_unaligned_be24(sbp + 1) & 0x1fffff); + n += sg_scnpr(cbp + n, cblen - n, "%s\n", b); +- len = sb_len; +- if (len > 32) +- len = 32; /* trim in case there is a lot of rubbish */ + } + check_raw: + if (raw_sinfo) { +-- +1.8.3.1 + + +From 8ebcd159bbc41f63fa96e904dee9307b2ee7aec2 Mon Sep 17 00:00:00 2001 +From: Gris Ge +Date: Fri, 28 Sep 2018 19:59:28 +0800 +Subject: [PATCH 30/30] sg_cmds_basic: Check resp for NULL before doing memset. + +Signed-off-by: Gris Ge +--- + lib/sg_cmds_basic.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/lib/sg_cmds_basic.c b/lib/sg_cmds_basic.c +index e625465..f4021bb 100644 +--- a/lib/sg_cmds_basic.c ++++ b/lib/sg_cmds_basic.c +@@ -324,6 +324,13 @@ sg_ll_inquiry_com(struct sg_pt_base * ptvp, bool cmddt, bool evpd, int pg_op, + uint8_t sense_b[SENSE_BUFF_LEN]; + uint8_t * up; + ++ if (resp == NULL) { ++ if (verbose) ++ pr2ws("Got NULL `resp` pointer"); ++ return SG_LIB_CAT_MALFORMED; ++ } ++ ++ + if (cmddt) + inq_cdb[1] |= 0x2; + if (evpd) +-- +1.8.3.1 + diff --git a/SOURCES/scsi-rescan.8 b/SOURCES/scsi-rescan.8 new file mode 100644 index 0000000..7252653 --- /dev/null +++ b/SOURCES/scsi-rescan.8 @@ -0,0 +1 @@ +.so man8/rescan-scsi-bus.sh.8 diff --git a/SPECS/sg3_utils.spec b/SPECS/sg3_utils.spec new file mode 100644 index 0000000..ba72eb4 --- /dev/null +++ b/SPECS/sg3_utils.spec @@ -0,0 +1,353 @@ +%global rescan_script rescan-scsi-bus.sh + +Summary: Utilities for devices that use SCSI command sets +Name: sg3_utils +Version: 1.44 +Release: 2%{?dist} +License: GPLv2+ and BSD +Group: Applications/System +Source0: http://sg.danny.cz/sg/p/sg3_utils-%{version}.tar.xz +Source2: scsi-rescan.8 +Patch0: BZ_1633235-sg3_utils-1.44-covscan-fix.patch +URL: http://sg.danny.cz/sg/sg3_utils.html +Requires: %{name}-libs%{?_isa} = %{version}-%{release} + + +%description +Collection of Linux utilities for devices that use the SCSI command set. +Includes utilities to copy data based on "dd" syntax and semantics (called +sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check +mode and log pages (sginfo, sg_modes and sg_logs); spin up and down +disks (sg_start); do self tests (sg_senddiag); and various other functions. +See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4 +series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0) +must be used. In the 2.6 series other device names may be used as +well (e.g. /dev/sda). + +Warning: Some of these tools access the internals of your system +and the incorrect usage of them may render your system inoperable. + +%package libs +Summary: Shared library for %{name} +Group: System Environment/Libraries + +%description libs +This package contains the shared library for %{name}. + +%package devel +Summary: Development library and header files for the sg3_utils library +Group: Development/Libraries +Requires: %{name}-libs%{?_isa} = %{version}-%{release} + +%description devel +This package contains the %{name} library and its header files for +developing applications. + +%prep +%autosetup -p 1 + +%build +%configure --disable-static + +# Don't use rpath! +sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool +sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool + +make %{?_smp_mflags} + + +%install +make install DESTDIR=$RPM_BUILD_ROOT +rm -rf $RPM_BUILD_ROOT/%{_libdir}/*.la + +install -p -m 755 scripts/%{rescan_script} $RPM_BUILD_ROOT%{_bindir} +( cd $RPM_BUILD_ROOT%{_bindir}; ln -sf %{rescan_script} scsi-rescan ) + +install -p -m 644 %{SOURCE2} $RPM_BUILD_ROOT%{_mandir}/man8 + + +%post libs -p /sbin/ldconfig + +%postun libs -p /sbin/ldconfig + + +%files +%doc AUTHORS BSD_LICENSE COPYING COVERAGE CREDITS ChangeLog README README.sg_start +%{_bindir}/* +%{_mandir}/man8/* + +%files libs +%doc BSD_LICENSE COPYING +%{_libdir}/*.so.* + +%files devel +%{_includedir}/scsi/*.h +%{_libdir}/*.so + + +%changelog +* Fri Sep 28 2018 Gris Ge - 1.44-2 +- Fix coverity scan warninings (RHBZ#1633235) + +* Tue Sep 18 2018 Gris Ge - 1.44-1 +- Upgrade to 1.44. (RHBZ#1631347) + +* Fri Aug 10 2018 Gris Ge 1.43-0.beta785.1 +- Upgrade to 1.43 beta r785. + +* Fri Feb 09 2018 Fedora Release Engineering - 1.42-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild + +* Thu Aug 03 2017 Fedora Release Engineering - 1.42-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild + +* Thu Jul 27 2017 Fedora Release Engineering - 1.42-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild + +* Tue Feb 21 2017 Than Ngo - 1.42-1 +- bz#1306078, update to 1.42 +- bz#1230493, dropped Requires glibc-headers + +* Sat Feb 11 2017 Fedora Release Engineering - 1.41-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild + +* Thu Feb 04 2016 Fedora Release Engineering - 1.41-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild + +* Wed Jul 08 2015 David Sommerseth - 1.41-1 +- updated to version 1.41 +- Corrected day/date mismatches in the changelog + +* Fri Jun 19 2015 Fedora Release Engineering - 1.40-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild + +* Sat Dec 06 2014 Dan Horák - 1.40-1 +- update to version 1.40 (#1164172) + +* Wed Sep 03 2014 Dan Horák - 1.39-1 +- update to version 1.39 (#1111893) + +* Mon Aug 18 2014 Fedora Release Engineering - 1.38-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild + +* Sun Jun 08 2014 Fedora Release Engineering - 1.38-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild + +* Fri Apr 18 2014 Dan Horák - 1.38-1 +- update to version 1.38 (#1083995) +- rebuild configure for ppc64le (#1079542) + +* Wed Jan 29 2014 Dan Horák - 1.37-3 +- fix various man pages (#948463) +- add man page for the rescan-scsi-bus.sh script + +* Fri Oct 18 2013 Dan Horák - 1.37-2 +- include fix for #920687 + +* Wed Oct 16 2013 Dan Horák - 1.37-1 +- update to version 1.37 +- switch to included rescan-scsi-bus script + +* Sun Aug 04 2013 Fedora Release Engineering - 1.36-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild + +* Thu Jun 06 2013 Dan Horák - 1.36-1 +- update to version 1.36 +- modernize spec + +* Thu Feb 14 2013 Fedora Release Engineering - 1.35-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild + +* Mon Jan 21 2013 Dan Horák - 1.35-1 +- update to version 1.35 + +* Thu Oct 18 2012 Dan Horák - 1.34-1 +- update to version 1.34 + +* Fri Sep 14 2012 Dan Horák - 1.33-4 +- add fix for sg3_utils >= 1.32 to the rescan-scsi-bus script + +* Sat Jul 21 2012 Fedora Release Engineering - 1.33-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild + +* Wed Apr 4 2012 Dan Horák - 1.33-2 +- include rescan-scsi-bus script 1.56 + +* Tue Apr 3 2012 Dan Horák - 1.33-1 +- update to version 1.33 + +* Sat Jan 14 2012 Fedora Release Engineering - 1.31-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild + +* Fri Feb 18 2011 Dan Horák - 1.31-1 +- update to version 1.31 + +* Wed Feb 09 2011 Fedora Release Engineering - 1.29-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild + +* Thu Jul 8 2010 Dan Horák - 1.29-2 +- added license texts into -libs subpackage + +* Mon Apr 12 2010 Dan Horák - 1.29-1 +- update to version 1.29 + +* Thu Jan 14 2010 Dan Horák - 1.28-2 +- include rescan-scsi-bus script 1.35 +- rebase patches and add fix for issue mentioned in #538787 + +* Thu Oct 22 2009 Dan Horák - 1.28-1 +- update to version 1.28 +- added fixes from RHEL to rescan-scsi-bus.sh +- added scsi-rescan symlink to the rescan-scsi-bus.sh script + +* Sun Jul 26 2009 Fedora Release Engineering - 1.27-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild + +* Tue Apr 28 2009 Dan Horák - 1.27-1 +- update to version 1.27 +- changelog: http://sg.danny.cz/sg/p/sg3_utils.ChangeLog + +* Tue Mar 31 2009 Dan Horák - 1.26-4 +- add dependency between the libs subpackage and the main package (#492921) + +* Wed Feb 25 2009 Fedora Release Engineering - 1.26-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild + +* Mon Nov 3 2008 Dan Horák - 1.26-2 +- update URL +- include rescan-scsi-bus script 1.29 + +* Mon Jun 30 2008 Dan Horák - 1.26-1 +- update to upstream version 1.26 + +* Fri Mar 28 2008 Phil Knirsch - 1.25-4 +- Dropped really unnecessary Provides of sg_utils (#226414) +- Use --disable-static in configure (#226414) + +* Thu Mar 27 2008 Phil Knirsch - 1.25-3 +- Specfile cleanup, removal of static development libraries (#226414) + +* Tue Feb 19 2008 Fedora Release Engineering - 1.25-2 +- Autorebuild for GCC 4.3 + +* Mon Oct 22 2007 Phil Knirsch - 1.25-1 +- Fixed URLs +- Updated to sg3_utils-1.25 + +* Thu Aug 16 2007 Phil Knirsch - 1.23-2 +- License review and update + +* Fri Feb 02 2007 Phil Knirsch - 1.23-1 +- Update to sg3_utils-1.23 +- Updated summary + +* Mon Nov 13 2006 Phil Knirsch - 1.22-1 +- Update to sg3_utils-1.22 + +* Wed Jul 12 2006 Jesse Keating - 1.20-2.1 +- rebuild + +* Wed Jun 07 2006 Phil Knirsch - 1.20-2 +- Fixed rebuild problem on latest toolchain +- Added missing buildprereqs + +* Fri May 19 2006 Phil Knirsch - 1.20-1 +- Update to sg3_utils-1.20. + +* Fri Feb 10 2006 Jesse Keating - 1.19-1.1 +- bump again for double-long bug on ppc(64) + +* Fri Feb 10 2006 Phil Knirsch - 1.19-1 +- Update to sg3_utils-1.19. +- Fixed rebuild problem on 64bit archs. + +* Tue Feb 07 2006 Jesse Keating - 1.17-1.1 +- rebuilt for new gcc4.1 snapshot and glibc changes + +* Mon Nov 07 2005 Phil Knirsch 1.17-1 +- Update to sg3-utils-1.17 +- Split package up into 3 subpackages: sg3_utils, devel and libs +- Some minor updates to the specfile + +* Wed Mar 02 2005 Phil Knirsch 1.06-5 +- bump release and rebuild with gcc 4 + +* Fri Feb 18 2005 Phil Knirsch 1.06-4 +- rebuilt + +* Tue Aug 03 2004 Phil Knirsch 1.06-3 +- rebuilt + +* Thu Mar 11 2004 Tim Powers 1.06-2 +- rebuild + +* Wed Feb 18 2004 Phil Knirsch 1.06-1 +- Initial version for RHEL3 U2. + +* Fri Jan 09 2004 - dgilbert@interlog.com +- sg3_utils.spec for mandrake; more sginfo work, sg_scan, sg_logs + * sg3_utils-1.06 + +* Wed Nov 12 2003 - dgilbert@interlog.com +- sg_readcap: sizes; sg_logs: double fetch; sg_map 256 sg devices; sginfo + * sg3_utils-1.05 + +* Tue May 13 2003 - dgilbert@interlog.com +- default sg_turs '-n=' to 1, sg_logs gets '-t' for temperature, CREDITS + * sg3_utils-1.04 + +* Wed Apr 02 2003 - dgilbert@interlog.com +- 6 byte CDBs for sg_modes, sg_start on block devs, sg_senddiag, man pages + * sg3_utils-1.03 + +* Wed Jan 01 2003 - dgilbert@interlog.com +- interwork with block SG_IO, fix in sginfo, '-t' for sg_turs + * sg3_utils-1.02 + +* Wed Aug 14 2002 - dgilbert@interlog.com +- raw switch in sg_inq + * sg3_utils-1.01 + +* Sun Jul 28 2002 - dgilbert@interlog.com +- decode sg_logs pages, add dio to sgm_dd, drop "gen=1" arg, "of=/dev/null" + * sg3_utils-1.00 + +* Sun Mar 17 2002 - dgilbert@interlog.com +- add sg_modes+sg_logs for sense pages, expand sg_inq, add fua+sync to sg_dd++ + * sg3_utils-0.99 + +* Sat Feb 16 2002 - dgilbert@interlog.com +- resurrect sg_reset; snprintf cleanup, time,gen+cdbsz args to sg_dd++ + * sg3_utils-0.98 + +* Sun Dec 23 2001 - dgilbert@interlog.com +- move isosize to archive directory; now found in util-linux-2.10s and later + * sg3_utils-0.97 + +* Fri Dec 21 2001 - dgilbert@interlog.com +- add sgm_dd, sg_read, sg_simple4 and sg_simple16 [add mmap-ed IO support] + * sg3_utils-0.96 + +* Sat Sep 15 2001 - dgilbert@interlog.com +- sg_map can do inquiry; sg_dd, sgp_dd + sgq_dd dio help + * sg3_utils-0.95 + +* Thu Apr 19 2001 - dgilbert@interlog.com +- add sg_start, improve sginfo and sg_map [Kurt Garloff] + * sg3_utils-0.94 + +* Mon Mar 5 2001 - dgilbert@interlog.com +- add scsi_devfs_scan, add sg_include.h, 'coe' more general in sgp_dd + * sg3_utils-0.93 + +* Tue Jan 16 2001 - dgilbert@interlog.com +- clean sg_err.h include dependencies, bug fixes, Makefile in archive directory + * sg3_utils-0.92 + +* Thu Dec 21 2000 - dgilbert@interlog.com +- signals for sg_dd, man pages and additions for sg_rbuf and isosize + * sg3_utils-0.91 + +* Mon Dec 11 2000 - dgilbert@interlog.com +- Initial creation of package, containing + * sg3_utils-0.90