diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist deleted file mode 100644 index b04b350..0000000 --- a/CVSROOT/checkoutlist +++ /dev/null @@ -1,13 +0,0 @@ -# The "checkoutlist" file is used to support additional version controlled -# administrative files in $CVSROOT/CVSROOT, such as template files. -# -# The first entry on a line is a filename which will be checked out from -# the corresponding RCS file in the $CVSROOT/CVSROOT directory. -# The remainder of the line is an error message to use if the file cannot -# be checked out. -# -# File format: -# -# [] -# -# comment lines begin with '#' diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo deleted file mode 100644 index b19e7b7..0000000 --- a/CVSROOT/commitinfo +++ /dev/null @@ -1,15 +0,0 @@ -# The "commitinfo" file is used to control pre-commit checks. -# The filter on the right is invoked with the repository and a list -# of files to check. A non-zero exit of the filter program will -# cause the commit to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/config b/CVSROOT/config deleted file mode 100644 index 42cd80d..0000000 --- a/CVSROOT/config +++ /dev/null @@ -1,21 +0,0 @@ -# Set this to "no" if pserver shouldn't check system users/passwords -#SystemAuth=no - -# Put CVS lock files in this directory rather than directly in the repository. -LockDir=/home/repos/refpolicy/lockdir - -# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top -# level of the new working directory when using the `cvs checkout' -# command. -#TopLevelAdmin=no - -# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the -# history file, or a subset as needed (ie `TMAR' logs all write operations) -#LogHistory=TOFEWGCMAR - -# Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg -# script to change the log message. Set it to `stat' to force CVS to verify# that the file has changed before reading it (this can take up to an extra -# second per directory being committed, so it is not recommended for large -# repositories. Set it to `never' (the previous CVS behavior) to prevent -# verifymsg scripts from changing the log message. -#RereadLogAfterVerify=always diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers deleted file mode 100644 index e989b75..0000000 --- a/CVSROOT/cvswrappers +++ /dev/null @@ -1,19 +0,0 @@ -# This file affects handling of files based on their names. -# -# The -m option specifies whether CVS attempts to merge files. -# -# The -k option specifies keyword expansion (e.g. -kb for binary). -# -# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers) -# -# wildcard [option value][option value]... -# -# where option is one of -# -f from cvs filter value: path to filter -# -t to cvs filter value: path to filter -# -m update methodology value: MERGE or COPY -# -k expansion mode value: b, o, kkv, &c -# -# and value is a single-quote delimited value. -# For example: -#*.gif -k 'b' diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo deleted file mode 100644 index d78886c..0000000 --- a/CVSROOT/editinfo +++ /dev/null @@ -1,21 +0,0 @@ -# The "editinfo" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo deleted file mode 100644 index 537607d..0000000 --- a/CVSROOT/loginfo +++ /dev/null @@ -1,27 +0,0 @@ -# The "loginfo" file controls where "cvs commit" log information -# is sent. The first entry on a line is a regular expression which must match -# the directory that the change is being made to, relative to the -# $CVSROOT. If a match is found, then the remainder of the line is a filter -# program that should expect log information on its standard input. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name ALL appears as a regular expression it is always used -# in addition to the first matching regex or DEFAULT. -# -# You may specify a format string as part of the -# filter. The string is composed of a `%' followed -# by a single format character, or followed by a set of format -# characters surrounded by `{' and `}' as separators. The format -# characters are: -# -# s = file name -# V = old version number (pre-checkin) -# v = new version number (post-checkin) -# t = tag or branch name -# -# For example: -#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog -# or -#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog diff --git a/CVSROOT/modules b/CVSROOT/modules deleted file mode 100644 index a1c860e..0000000 --- a/CVSROOT/modules +++ /dev/null @@ -1,30 +0,0 @@ -# Three different line formats are valid: -# key -a aliases... -# key [options] directory -# key [options] directory files... -# -# Where "options" are composed of: -# -i prog Run "prog" on "cvs commit" from top-level of module. -# -o prog Run "prog" on "cvs checkout" of module. -# -e prog Run "prog" on "cvs export" of module. -# -t prog Run "prog" on "cvs rtag" of module. -# -u prog Run "prog" on "cvs update" of module. -# -d dir Place module in directory "dir" instead of module name. -# -l Top-level directory only -- do not recurse. -# -# NOTE: If you change any of the "Run" options above, you'll have to -# release and re-checkout any working directories of these modules. -# -# And "directory" is a path to a directory relative to $CVSROOT. -# -# The "-a" option specifies an alias. An alias is interpreted as if -# everything on the right of the "-a" had been typed on the command line. -# -# You can encode a module within a module by using the special '&' -# character to interpose another module into the current module. This -# can be useful for creating a module that consists of many directories -# spread out over the entire source repository. -refpolicy refpolicy -docs docs -strict strict -www www diff --git a/CVSROOT/notify b/CVSROOT/notify deleted file mode 100644 index 74ae6f9..0000000 --- a/CVSROOT/notify +++ /dev/null @@ -1,12 +0,0 @@ -# The "notify" file controls where notifications from watches set by -# "cvs watch add" or "cvs edit" are sent. The first entry on a line is -# a regular expression which is tested against the directory that the -# change is being made to, relative to the $CVSROOT. If it matches, -# then the remainder of the line is a filter program that should contain -# one occurrence of %s for the user to notify, and information on its -# standard input. -# -# "ALL" or "DEFAULT" can be used in place of the regular expression. -# -# For example: -#ALL mail -s "CVS notification" %s diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo deleted file mode 100644 index 49e59f4..0000000 --- a/CVSROOT/rcsinfo +++ /dev/null @@ -1,13 +0,0 @@ -# The "rcsinfo" file is used to control templates with which the editor -# is invoked on commit and import. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being made to, relative to the -# $CVSROOT. For the first match that is found, then the remainder of the -# line is the name of the file that contains the template. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo deleted file mode 100644 index 274a46d..0000000 --- a/CVSROOT/taginfo +++ /dev/null @@ -1,20 +0,0 @@ -# The "taginfo" file is used to control pre-tag checks. -# The filter on the right is invoked with the following arguments: -# -# $1 -- tagname -# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d -# $3 -- repository -# $4-> file revision [file revision ...] -# -# A non-zero exit of the filter program will cause the tag to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg deleted file mode 100644 index 86f747c..0000000 --- a/CVSROOT/verifymsg +++ /dev/null @@ -1,21 +0,0 @@ -# The "verifymsg" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository.