#

# Makefile for the security policy.

#

# Targets:

# 

# install       - compile and install the policy configuration, and context files.

# load          - compile, install, and load the policy configuration.

# reload        - compile, install, and load/reload the policy configuration.

# relabel       - relabel filesystems based on the file contexts configuration.

# checklabels   - check filesystems against the file context configuration

# restorelabels - check filesystems against the file context configuration

#                 and restore the label of files with incorrect labels

# policy        - compile the policy configuration locally for testing/development.

#

# The default target is 'policy'.

#

########################################

#

# Configurable portions of the Makefile

#

# Policy version

# By default, checkpolicy will create the highest

# version policy it supports.  Setting this will

# override the version.

#OUTPUT_POLICY = 18

# Policy Type

# strict, targeted, strict-mls, targeted-mls

TYPE = strict

# Policy Name

# If set, this will be used as the policy

# name.  Otherwise the policy type will be

# used for the name.

NAME = refpolicy

# Distribution

# Some distributions have portions of policy

# for programs or configurations specific to the

# distribution.  Setting this will enable options

# for the distribution.

# redhat, gentoo, debian, and suse are current options.

# Fedora users should enable redhat.

#DISTRO = redhat

# Build monolithic policy.  Putting n here

# will build a loadable module policy.

# Only monolithic policies are currently supported.

MONOLITHIC=y

# Uncomment this to disable command echoing

#QUIET:=@

########################################

#

# NO OPTIONS BELOW HERE

#

# executable paths

PREFIX := /usr

BINDIR := $(PREFIX)/bin

SBINDIR := $(PREFIX)/sbin

CHECKPOLICY := $(BINDIR)/checkpolicy

LOADPOLICY := $(SBINDIR)/load_policy

SETFILES := $(SBINDIR)/setfiles

GENHOMEDIRCON := $(SBINDIR)/genhomedircon

CFLAGS := -Wall

SUPPORT := support

GENXML := $(SUPPORT)/segenxml.py

GENDOC := $(SUPPORT)/sedoctool.py

FCSORT := $(SUPPORT)/fc_sort

SETTUN := $(SUPPORT)/set_tunables

XMLLINT := $(BINDIR)/xmllint

# enable MLS if requested.

ifneq ($(findstring mls,$(TYPE)),)

	override M4PARAM += -D enable_mls

	CHECKPOLICY += -M

endif

# compile targeted policy if requested.

ifneq ($(findstring targeted,$(TYPE)),)

	override M4PARAM += -D targeted_policy

endif

# enable distribution-specific policy

ifneq ($(DISTRO),)

	override M4PARAM += -D distro_$(DISTRO)

endif

ifeq ($(MONOLITHIC),y)

	override M4PARAM += -D monolithic_policy

endif

ifneq ($(OUTPUT_POLICY),)

	CHECKPOLICY += -c $(OUTPUT_POLICY)

endif

ifeq ($(NAME),)

	NAME := $(TYPE)

endif

# determine the policy version and current kernel version if possible

PV := $(shell $(CHECKPOLICY) -V |cut -f 1 -d ' ')

KV := $(shell cat /selinux/policyvers)

# dont print version warnings if we are unable to determine

# the currently running kernel's policy version

ifeq ($(KV),)

	KV := $(PV)

endif

FC := file_contexts

POLVER := policy.$(PV)

# install paths

TOPDIR = $(DESTDIR)/etc/selinux

INSTALLDIR = $(TOPDIR)/$(NAME)

POLICYPATH = $(INSTALLDIR)/policy

SRCPATH = $(INSTALLDIR)/src

USERPATH = $(INSTALLDIR)/users

CONTEXTPATH = $(INSTALLDIR)/contexts

LOADPATH = $(POLICYPATH)/$(POLVER)

FCPATH = $(CONTEXTPATH)/files/file_contexts

HOMEDIRPATH = $(CONTEXTPATH)/files/homedir_template

POLDIR = policy

MODDIR = $(POLDIR)/modules

BASE_MODULE = $(MODDIR)/kernel

FLASKDIR = $(POLDIR)/flask

ifneq ($(findstring targeted,$(TYPE)),)

	APPCONF := config/appconfig-targeted

else

	APPCONF := config/appconfig-strict

endif

M4SUPPORT = $(wildcard $(POLDIR)/support/*.spt)

GLOBALTUN := $(POLDIR)/global_tunables

MOD_CONF := $(POLDIR)/modules.conf

TUNABLES := $(POLDIR)/tunables.conf

APPDIR := $(CONTEXTPATH)

APPFILES := $(addprefix $(APPDIR)/,default_contexts default_type initrc_context failsafe_context userhelper_context removable_context dbus_contexts customizable_types) $(CONTEXTPATH)/files/media $(INSTALLDIR)/booleans

CONTEXTFILES += $(wildcard $(APPCONF)/*_context*) $(APPCONF)/media

USER_FILES := $(POLDIR)/users 

ALL_LAYERS := $(filter-out $(MODDIR)/CVS,$(shell find $(wildcard $(MODDIR)/*) -maxdepth 0 -type d))

GENERATED_TE := $(basename $(foreach dir,$(ALL_LAYERS),$(wildcard $(dir)/*.te.in)))

GENERATED_IF := $(basename $(foreach dir,$(ALL_LAYERS),$(wildcard $(dir)/*.if.in)))

GENERATED_FC := $(basename $(foreach dir,$(ALL_LAYERS),$(wildcard $(dir)/*.fc.in)))

# sort here since it removes duplicates, which can happen

# when a generated file is already generated

DETECTED_MODS := $(sort $(foreach dir,$(ALL_LAYERS),$(wildcard $(dir)/*.te)) $(GENERATED_TE))

MODBASE := base

MODMOD := module

BASE_MODS := $(foreach mod,$(shell awk '/^[[:blank:]]*[[:alpha:]]/{ if ($$3 == "$(MODBASE)") print $$1 }' $(MOD_CONF) 2> /dev/null),$(subst ./,,$(shell find -iname $(mod).te)))

MOD_MODS := $(foreach mod,$(shell awk '/^[[:blank:]]*[[:alpha:]]/{ if ($$3 == "$(MODMOD)") print $$1 }' $(MOD_CONF) 2> /dev/null),$(subst ./,,$(shell find -iname $(mod).te)))

# for monolithic policy use all base and module to create policy

# for modular policy, use only base

ifeq ($(MONOLITHIC),y)

	ENABLEMOD := $(BASE_MODS) $(MOD_MODS)

else

	ENABLEMOD := $(BASE_MODS)

endif

ALL_MODULES := $(filter $(ENABLEMOD),$(DETECTED_MODS))

PRE_TE_FILES := $(addprefix $(FLASKDIR)/,security_classes initial_sids access_vectors) $(M4SUPPORT) $(POLDIR)/mls

ALL_INTERFACES := $(ALL_MODULES:.te=.if)

ALL_TE_FILES := $(ALL_MODULES)

POST_TE_FILES := $(POLDIR)/users $(POLDIR)/constraints

ALL_FC_FILES := $(ALL_MODULES:.te=.fc)

HOMEDIR_TEMPLATE = tmp/homedir_template

POLICY_SECTIONS := tmp/pre_te_files.conf tmp/generated_definitions.conf tmp/all_interfaces.conf tmp/all_attrs_types.conf $(GLOBALTUN) tmp/only_te_rules.conf tmp/all_post.conf

DOCS = doc

POLXML = $(DOCS)/policy.xml

XMLDTD = $(DOCS)/policy.dtd

LAYERXML = metadata.xml

HTMLDIR = $(DOCS)/html

DOCTEMPLATE = $(DOCS)/templates

########################################

#

# default action: build policy locally

#

default: policy

policy: $(POLVER)

install: $(LOADPATH) $(FCPATH) $(APPFILES) $(USERPATH)/local.users

load: tmp/load

########################################

#

# Build a binary policy locally

#

$(POLVER): policy.conf

	@echo "Compiling $(NAME) $(POLVER)"

ifneq ($(PV),$(KV))

	@echo

	@echo "WARNING: Policy version mismatch!  Is your OUTPUT_POLICY set correctly?"

	@echo

endif

	$(QUIET) $(CHECKPOLICY) $^ -o $@

########################################

#

# Install a binary policy

#

$(LOADPATH): policy.conf

	@mkdir -p $(POLICYPATH)

	@echo "Compiling and installing $(NAME) $(LOADPATH)"

ifneq ($(PV),$(KV))

	@echo

	@echo "WARNING: Policy version mismatch!  Is your OUTPUT_POLICY set correctly?"

	@echo

endif

	$(QUIET) $(CHECKPOLICY) $^ -o $@

########################################

#

# Load the binary policy

#

reload tmp/load: $(LOADPATH) $(FCPATH)

	@echo "Loading $(NAME) $(LOADPATH)"

	$(QUIET) $(LOADPOLICY) -q $(LOADPATH)

	@touch tmp/load

########################################

#

# Construct a monolithic policy.conf

#

policy.conf: $(POLICY_SECTIONS)

	@echo "Creating $(NAME) policy.conf"

# checkpolicy can use the #line directives provided by -s for error reporting:

	$(QUIET) m4 $(M4PARAM) -s $^ > tmp/$@.tmp

	$(QUIET) sed -e /^portcon/d -e /^nodecon/d -e /^netifcon/d < tmp/$@.tmp > $@

# the ordering of these ocontexts matters:

	$(QUIET) grep ^portcon tmp/$@.tmp >> $@ || true

	$(QUIET) grep ^netifcon tmp/$@.tmp >> $@ || true

	$(QUIET) grep ^nodecon tmp/$@.tmp >> $@ || true

tmp/pre_te_files.conf: $(PRE_TE_FILES)

	@test -d tmp || mkdir -p tmp

	$(QUIET) cat $^ > $@

tmp/generated_definitions.conf: $(ALL_LAYERS) $(ALL_TE_FILES)

# per-userdomain templates:

	@test -d tmp || mkdir -p tmp

	$(QUIET) echo "define(\`per_userdomain_templates',\`" > $@

	$(QUIET) for i in $(patsubst %.te,%,$(notdir $(ALL_MODULES))); do \

		echo "ifdef(\`""$$i""_per_userdomain_template',\`""$$i""_per_userdomain_template("'$$1'")')" \

			>> $@ ;\

	done

	$(QUIET) echo "')" >> $@

# define foo.te

	$(QUIET) for i in $(notdir $(ALL_MODULES)); do \

		echo "define(\`$$i')" >> $@ ;\

	done

	$(QUIET) $(SETTUN) $(TUNABLES) >> $@

tmp/all_interfaces.conf: $(M4SUPPORT) $(ALL_INTERFACES)

ifeq ($(ALL_INTERFACES),)

	$(error No enabled modules! $(notdir $(MOD_CONF)) may need to be generated by using "make conf")

endif

	@test -d tmp || mkdir -p tmp

	$(QUIET) m4 $^ | sed -e s/dollarsstar/\$$\*/g > $@

tmp/all_te_files.conf: $(ALL_TE_FILES)

ifeq ($(ALL_TE_FILES),)

	$(error No enabled modules! $(notdir $(MOD_CONF)) may need to be generated by using "make conf")

endif

	@test -d tmp || mkdir -p tmp

	$(QUIET) cat $^ > $@

tmp/post_te_files.conf: $(POST_TE_FILES)

	@test -d tmp || mkdir -p tmp

	$(QUIET) cat $^ > $@

# extract attributes and put them first. extract post te stuff

# like genfscon and put last.  portcon, nodecon, and netifcon

# is delayed since they are generated by m4

tmp/all_attrs_types.conf tmp/only_te_rules.conf tmp/all_post.conf: tmp/all_te_files.conf tmp/post_te_files.conf

	$(QUIET) grep ^attribute tmp/all_te_files.conf > tmp/all_attrs_types.conf || true

	$(QUIET) grep '^type ' tmp/all_te_files.conf >> tmp/all_attrs_types.conf

	$(QUIET) cat tmp/post_te_files.conf > tmp/all_post.conf

	$(QUIET) grep '^sid ' tmp/all_te_files.conf >> tmp/all_post.conf || true

	$(QUIET) egrep '^fs_use_(xattr|task|trans)' tmp/all_te_files.conf >> tmp/all_post.conf || true

	$(QUIET) grep ^genfscon tmp/all_te_files.conf >> tmp/all_post.conf || true

	$(QUIET) sed -r -e /^attribute/d -e '/^type /d' -e /^genfscon/d \

			-e '/^sid /d' -e '/^fs_use_(xattr|task|trans)/d' \

			< tmp/all_te_files.conf > tmp/only_te_rules.conf

$(MODDIR)/kernel/corenetwork.if: $(MODDIR)/kernel/corenetwork.if.m4 $(MODDIR)/kernel/corenetwork.if.in

	@echo "#" > $@

	@echo "# This is a generated file!  Instead of modifying this file, the" >> $@

	@echo "# $(notdir $@).in or $(notdir $@).m4 file should be modified." >> $@

	@echo "#" >> $@

	$(QUIET) cat $(MODDIR)/kernel/corenetwork.if.in >> $@

	$(QUIET) egrep "^[[:blank:]]*network_(interface|node|port)\(.*\)" $(@:.if=.te).in \

		| m4 $(M4PARAM) $(M4SUPPORT) $(MODDIR)/kernel/corenetwork.if.m4 - \

		| sed -e 's/dollarsone/\$$1/g' -e 's/dollarszero/\$$0/g' >> $@

$(MODDIR)/kernel/corenetwork.te: $(MODDIR)/kernel/corenetwork.te.m4 $(MODDIR)/kernel/corenetwork.te.in

	@echo "#" > $@

	@echo "# This is a generated file!  Instead of modifying this file, the" >> $@

	@echo "# $(notdir $@).in or $(notdir $@).m4 file should be modified." >> $@

	@echo "#" >> $@

	$(QUIET) m4 $(M4PARAM) $(M4SUPPORT) $^ \

		| sed -e 's/dollarsone/\$$1/g' -e 's/dollarszero/\$$0/g' >> $@

########################################

#

# Remove the dontaudit rules from the policy.conf

#

enableaudit: policy.conf

	@test -d tmp || mkdir -p tmp

	@echo "Removing dontaudit rules from policy.conf"

	$(QUIET) grep -v dontaudit policy.conf > tmp/policy.audit

	$(QUIET) mv tmp/policy.audit policy.conf

########################################

#

# Construct file_contexts

#

$(FC): $(M4SUPPORT) tmp/generated_definitions.conf $(ALL_FC_FILES) $(FCSORT)

ifeq ($(ALL_FC_FILES),)

	$(error No enabled modules! $(notdir $(MOD_CONF)) may need to be generated by using "make conf")

endif

	@echo "Creating file_contexts."

	@test -d tmp || mkdir -p tmp

	$(QUIET) m4 $(M4PARAM) $(M4SUPPORT) tmp/generated_definitions.conf $(ALL_FC_FILES) > tmp/$@.tmp

	$(QUIET) grep -e HOME -e ROLE tmp/$@.tmp > $(HOMEDIR_TEMPLATE)

	$(QUIET) sed -i -e /HOME/d -e /ROLE/d tmp/$@.tmp

	$(QUIET) $(FCSORT) tmp/$@.tmp $@

########################################

#

# Install file_contexts

#

$(FCPATH): $(FC) $(LOADPATH) $(USERPATH)/system.users

	@echo "Validating file_contexts."

	$(QUIET) $(SETFILES) -q -c $(LOADPATH) $(FC)

	@echo "Installing file_contexts."

	@mkdir -p $(CONTEXTPATH)/files

	$(QUIET) install -m 644 $(FC) $(FCPATH)

	$(QUIET) install -m 644 $(HOMEDIR_TEMPLATE) $(HOMEDIRPATH)

	$(QUIET) $(GENHOMEDIRCON) -d $(TOPDIR) -t $(NAME) $(USEPWD)

########################################

#

# Filesystem labeling

#

FILESYSTEMS := `mount | grep -v "context=" | egrep -v '\((|.*,)bind(,.*|)\)' | awk '/(ext[23]| xfs| jfs).*rw/{print $$3}';`

checklabels: $(FC) $(SETFILES)

	@if test -z "$(FILESYSTEMS)"; then \

		echo "No filesystems with extended attributes found!" ;\

		false ;\

	fi

	$(QUIET) $(SETFILES) -v -n $(FC) $(FILESYSTEMS)

restorelabels: $(FC) $(SETFILES)

	@if test -z "$(FILESYSTEMS)"; then \

		echo "No filesystems with extended attributes found!" ;\

		false ;\

	fi

	$(QUIET) $(SETFILES) -v $(FC) $(FILESYSTEMS)

relabel:  $(FC) $(SETFILES)

	@if test -z "$(FILESYSTEMS)"; then \

		echo "No filesystems with extended attributes found!" ;\

		false ;\

	fi

	$(QUIET) $(SETFILES) $(FC) $(FILESYSTEMS)

########################################

#

# Create config files

#

conf: $(MOD_CONF) $(TUNABLES) $(GENERATED_TE) $(GENERATED_IF) $(GENERATED_FC)

$(MOD_CONF) $(TUNABLES): $(POLXML)

	@echo "Updating $(MOD_CONF) and $(TUNABLES)"

	$(QUIET) cd $(DOCS) && ../$(GENDOC) -t ../$(TUNABLES) -m ../$(MOD_CONF) -x ../$(POLXML)

########################################

#

# Documentation generation

#

# minimal dependencies here, because we don't want to rebuild 

# this and its dependents every time the dependencies

# change.  Also use all .if files here, rather then just the

# enabled modules.

$(POLXML): $(DETECTED_MODS:.te=.if) $(foreach dir,$(ALL_LAYERS),$(dir)/$(LAYERXML))

	@echo "Creating $@"

	@mkdir -p tmp

	$(QUIET) echo '' > $@

	$(QUIET) echo '' >> $@

	$(QUIET) $(GENXML) -w -m $(LAYERXML) -t $(GLOBALTUN) $(ALL_LAYERS) >> $@

	$(QUIET) if test -x $(XMLLINT) && test -f $(XMLDTD); then \

		$(XMLLINT) --noout --dtdvalid $(XMLDTD) $@ ;\

	fi

html: $(POLXML)

	@mkdir -p $(HTMLDIR)

	$(QUIET) cd $(DOCS) && ../$(GENDOC) -d ../$(HTMLDIR) -T ../$(DOCTEMPLATE) -x ../$(POLXML)

	$(QUIET) cp $(DOCTEMPLATE)/*.css $(HTMLDIR)

########################################

#

# Runtime binary policy patching of users

#

$(USERPATH)/system.users: $(USER_FILES) tmp/generated_definitions.conf

	@mkdir -p $(USERPATH)

	@echo "Installing system.users"

	@echo "# " > tmp/system.users

	@echo "# Do not edit this file. " >> tmp/system.users

	@echo "# This file is replaced on reinstalls of this policy." >> tmp/system.users

	@echo "# Please edit local.users to make local changes." >> tmp/system.users

	@echo "#" >> tmp/system.users

	$(QUIET) m4 $(M4PARAM) tmp/generated_definitions.conf $(USER_FILES) | \

		egrep -v "^[[:space:]]*($$|#)" >> tmp/system.users

	$(QUIET) install -m 644 tmp/system.users $@

$(USERPATH)/local.users: config/local.users

	@mkdir -p $(USERPATH)

	@echo "Installing local.users"

	$(QUIET) install -b -m 644 $< $@

########################################

#

# Appconfig files

#

install-appconfig: $(APPFILES)

$(INSTALLDIR)/booleans: $(TUNABLES)

	@mkdir -p $(INSTALLDIR)

	$(QUIET) egrep '^[[:blank:]]*[[:alpha:]]' $(TUNABLES) \

		| sed -e 's/false/0/g' -e 's/true/1/g' > tmp/booleans

	$(QUIET) install -m 644 tmp/booleans $@

$(CONTEXTPATH)/files/media: $(APPCONF)/media

	@mkdir -p $(CONTEXTPATH)/files/

	$(QUIET) install -m 644 $< $@

$(APPDIR)/default_contexts: $(APPCONF)/default_contexts

	@mkdir -p $(APPDIR)

	$(QUIET) install -m 644 $< $@

$(APPDIR)/removable_context: $(APPCONF)/removable_context

	@mkdir -p $(APPDIR)

	$(QUIET) install -m 644 $< $@

$(APPDIR)/customizable_types: policy.conf

	@mkdir -p $(APPDIR)

	$(QUIET) grep "^type .*customizable" $< | cut -d',' -f1 | cut -d' ' -f2 > tmp/customizable_types

	$(QUIET) install -m 644 tmp/customizable_types $@ 

$(APPDIR)/default_type: $(APPCONF)/default_type

	@mkdir -p $(APPDIR)

	$(QUIET) install -m 644 $< $@

$(APPDIR)/userhelper_context: $(APPCONF)/userhelper_context

	@mkdir -p $(APPDIR)

	$(QUIET) install -m 644 $< $@

$(APPDIR)/initrc_context: $(APPCONF)/initrc_context

	@mkdir -p $(APPDIR)

	$(QUIET) install -m 644 $< $@

$(APPDIR)/failsafe_context: $(APPCONF)/failsafe_context

	@mkdir -p $(APPDIR)

	$(QUIET) install -m 644 $< $@

$(APPDIR)/dbus_contexts: $(APPCONF)/dbus_contexts

	@mkdir -p $(APPDIR)

	$(QUIET) install -m 644 $< $@

$(APPDIR)/users/root: $(APPCONF)/root_default_contexts

	@mkdir -p $(APPDIR)/users

	$(QUIET) install -m 644 $< $@

########################################

#

# Install policy sources

#

install-src:

	rm -rf $(SRCPATH)/policy.old

	-mv $(SRCPATH)/policy $(SRCPATH)/policy.old

	mkdir -p $(SRCPATH)/policy

	cp -R . $(SRCPATH)/policy

########################################

#

# Clean the sources

#

clean:

	rm -fR tmp

	rm -f policy.conf

	rm -f policy.$(PV)

	rm -f $(FC)

########################################

#

# Clean everything

#

bare: clean

	rm -f $(POLXML)

	rm -f $(SUPPORT)/*.pyc

	rm -f $(FCSORT)

	rm -f $(MOD_CONF)

	rm -f $(TUNABLES)

	rm -fR $(HTMLDIR)

ifneq ($(GENERATED_TE),)

	rm -f $(GENERATED_TE)

endif

ifneq ($(GENERATED_IF),)

	rm -f $(GENERATED_IF)

endif

ifneq ($(GENERATED_FC),)

	rm -f $(GENERATED_FC)

endif

.PHONY: default policy install load reload enableaudit checklabels restorelabels relabel conf clean bare