From 8a6e3fcbe387e6b5476375448964dab198d94959 Mon Sep 17 00:00:00 2001 From: Vojtech Polasek Date: Wed, 2 Sep 2020 10:01:45 +0200 Subject: [PATCH] add CUI kickstart for rhel8 --- rhel8/kickstart/ssg-rhel8-cui-ks.cfg | 167 +++++++++++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 rhel8/kickstart/ssg-rhel8-cui-ks.cfg diff --git a/rhel8/kickstart/ssg-rhel8-cui-ks.cfg b/rhel8/kickstart/ssg-rhel8-cui-ks.cfg new file mode 100644 index 0000000000..0957fded96 --- /dev/null +++ b/rhel8/kickstart/ssg-rhel8-cui-ks.cfg @@ -0,0 +1,167 @@ +# SCAP Security Guide CUI profile kickstart for Red Hat Enterprise Linux 8 +# +# Based on: +# http://fedoraproject.org/wiki/Anaconda/Kickstart +# http://usgcb.nist.gov/usgcb/content/configuration/workstation-ks.cfg + +# Install a fresh new system (optional) +install + +# Specify installation method to use for installation +# To use a different one comment out the 'url' one below, update +# the selected choice with proper options & un-comment it +# +# Install from an installation tree on a remote server via FTP or HTTP: +# --url the URL to install from +# +# Example: +# +# url --url=http://192.168.122.1/image +# +# Modify concrete URL in the above example appropriately to reflect the actual +# environment machine is to be installed in +# +# Other possible / supported installation methods: +# * install from the first CD-ROM/DVD drive on the system: +# +# cdrom +# +# * install from a directory of ISO images on a local drive: +# +# harddrive --partition=hdb2 --dir=/tmp/install-tree +# +# * install from provided NFS server: +# +# nfs --server= --dir= [--opts=] +# +# Set language to use during installation and the default language to use on the installed system (required) +lang en_US.UTF-8 + +# Set system keyboard type / layout (required) +keyboard us + +# Configure network information for target system and activate network devices in the installer environment (optional) +# --onboot enable device at a boot time +# --device device to be activated and / or configured with the network command +# --bootproto method to obtain networking configuration for device (default dhcp) +# --noipv6 disable IPv6 on this device +# +# NOTE: Usage of DHCP will fail CCE-27021-5 (DISA FSO RHEL-06-000292). To use static IP configuration, +# "--bootproto=static" must be used. For example: +# network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0 --gateway=10.0.2.254 --nameserver 192.168.2.1,192.168.3.1 +# +network --onboot yes --bootproto dhcp + +# Set the system's root password (required) +# Plaintext password is: server +# Refer to e.g. +# https://pykickstart.readthedocs.io/en/latest/commands.html#rootpw +# to see how to create encrypted password form for different plaintext password +rootpw --iscrypted $6$0WWGZ1e6icT$1KiHZK.Nzp3HQerfiy8Ic3pOeCWeIzA.zkQ7mkvYT3bNC5UeGK2ceE5b6TkSg4D/kiSudkT04QlSKknsrNE220 + +# The selected profile will restrict root login +# Add a user that can login and escalate privileges +# Plaintext password is: admin123 +user --name=admin --groups=wheel --password=$6$Ga6ZnIlytrWpuCzO$q0LqT1USHpahzUafQM9jyHCY9BiE5/ahXLNWUMiVQnFGblu0WWGZ1e6icTaCGO4GNgZNtspp1Let/qpM7FMVB0 --iscrypted + +# Configure firewall settings for the system (optional) +# --enabled reject incoming connections that are not in response to outbound requests +# --ssh allow sshd service through the firewall +firewall --enabled --ssh + +# Set up the authentication options for the system (required) +# --enableshadow enable shadowed passwords by default +# --passalgo hash / crypt algorithm for new passwords +# See the manual page for authconfig for a complete list of possible options. +authconfig --enableshadow --passalgo=sha512 + +# State of SELinux on the installed system (optional) +# Defaults to enforcing +selinux --enforcing + +# Set the system time zone (required) +timezone --utc America/New_York + +# Specify how the bootloader should be installed (required) +# Refer to e.g. +# https://pykickstart.readthedocs.io/en/latest/commands.html#rootpw +# to see how to create encrypted password form for different plaintext password +bootloader --location=mbr --append="audit=1 audit_backlog_limit=8192 slub_debug=P page_poison=1 vsyscall=none" + +# Initialize (format) all disks (optional) +zerombr + +# The following partition layout scheme assumes disk of size 20GB or larger +# Modify size of partitions appropriately to reflect actual machine's hardware +# +# Remove Linux partitions from the system prior to creating new ones (optional) +# --linux erase all Linux partitions +# --initlabel initialize the disk label to the default based on the underlying architecture +clearpart --linux --initlabel + +# Create primary system partitions (required for installs) +part /boot --fstype=xfs --size=512 +part pv.01 --grow --size=1 + +# Create a Logical Volume Management (LVM) group (optional) +volgroup VolGroup --pesize=4096 pv.01 + +# Create particular logical volumes (optional) +logvol / --fstype=xfs --name=root --vgname=VolGroup --size=11264 --grow +# Ensure /home Located On Separate Partition +logvol /home --fstype=xfs --name=home --vgname=VolGroup --size=1024 --fsoptions="nodev" +# Ensure /tmp Located On Separate Partition +logvol /tmp --fstype=xfs --name=tmp --vgname=VolGroup --size=1024 --fsoptions="nodev,nosuid,noexec" +# Ensure /var/tmp Located On Separate Partition +logvol /var/tmp --fstype=xfs --name=vartmp --vgname=VolGroup --size=1024 --fsoptions="nodev,nosuid,noexec" +# Ensure /var Located On Separate Partition +logvol /var --fstype=xfs --name=var --vgname=VolGroup --size=2048 --fsoptions="nodev" +# Ensure /var/log Located On Separate Partition +logvol /var/log --fstype=xfs --name=log --vgname=VolGroup --size=1024 --fsoptions="nodev,nosuid,noexec" +# Ensure /var/log/audit Located On Separate Partition +logvol /var/log/audit --fstype=xfs --name=audit --vgname=VolGroup --size=512 --fsoptions="nodev,nosuid,noexec" +logvol swap --name=swap --vgname=VolGroup --size=2016 + +# The OpenSCAP installer add-on is used to apply SCAP (Security Content Automation Protocol) +# content - security policies - on the installed system.This add-on has been enabled by default +# since Red Hat Enterprise Linux 7.2. When enabled, the packages necessary to provide this +# functionality will automatically be installed. However, by default, no policies are enforced, +# meaning that no checks are performed during or after installation unless specifically configured. +# +# Important +# Applying a security policy is not necessary on all systems. This screen should only be used +# when a specific policy is mandated by your organization rules or government regulations. +# Unlike most other commands, this add-on does not accept regular options, but uses key-value +# pairs in the body of the %addon definition instead. These pairs are whitespace-agnostic. +# Values can be optionally enclosed in single quotes (') or double quotes ("). +# +# The following keys are recognized by the add-on: +# content-type - Type of the security content. Possible values are datastream, archive, rpm, and scap-security-guide. +# - If the content-type is scap-security-guide, the add-on will use content provided by the +# scap-security-guide package, which is present on the boot media. This means that all other keys except profile will have no effect. +# content-url - Location of the security content. The content must be accessible using HTTP, HTTPS, or FTP; local storage is currently not supported. A network connection must be available to reach content definitions in a remote location. +# datastream-id - ID of the data stream referenced in the content-url value. Used only if content-type is datastream. +# xccdf-id - ID of the benchmark you want to use. +# xccdf-path - Path to the XCCDF file which should be used; given as a relative path in the archive. +# profile - ID of the profile to be applied. Use default to apply the default profile. +# fingerprint - A MD5, SHA1 or SHA2 checksum of the content referenced by content-url. +# tailoring-path - Path to a tailoring file which should be used, given as a relative path in the archive. +# +# The following is an example %addon org_fedora_oscap section which uses content from the +# scap-security-guide on the installation media: +%addon org_fedora_oscap + content-type = scap-security-guide + profile = xccdf_org.ssgproject.content_profile_cui +%end + +# Packages selection (%packages section is required) +%packages + +# Require @Base +@Base + +%end # End of %packages section + +# Reboot after the installation is complete (optional) +# --eject attempt to eject CD or DVD media before rebooting +reboot --eject