diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..ce51921 --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +SOURCES/mariadb-10.5.9-downstream_modified.tar.gz diff --git a/.rh-mariadb105-mariadb.metadata b/.rh-mariadb105-mariadb.metadata new file mode 100644 index 0000000..ebaf597 --- /dev/null +++ b/.rh-mariadb105-mariadb.metadata @@ -0,0 +1 @@ +30cd3856d2c771963ee5f4eaea41151fd4e0faea SOURCES/mariadb-10.5.9-downstream_modified.tar.gz diff --git a/SOURCES/LICENSE.clustercheck b/SOURCES/LICENSE.clustercheck new file mode 100644 index 0000000..609015d --- /dev/null +++ b/SOURCES/LICENSE.clustercheck @@ -0,0 +1,27 @@ +Copyright (c) 2012-2014, Olaf van Zandwijk +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/SOURCES/README.mysql-docs b/SOURCES/README.mysql-docs new file mode 100644 index 0000000..dd894a7 --- /dev/null +++ b/SOURCES/README.mysql-docs @@ -0,0 +1,4 @@ +The official MySQL documentation is not freely redistributable, so we cannot +include it in RHEL or Fedora. You can find it on-line at + +http://dev.mysql.com/doc/ diff --git a/SOURCES/README.mysql-license b/SOURCES/README.mysql-license new file mode 100644 index 0000000..ceabbcf --- /dev/null +++ b/SOURCES/README.mysql-license @@ -0,0 +1,9 @@ +MySQL is distributed under GPL v2, but there are some licensing exceptions +that allow the client libraries to be linked with a non-GPL application, +so long as the application is under a license approved by Oracle. +For details see + +http://www.mysql.com/about/legal/licensing/foss-exception/ + +Some innobase code from Percona and Google is under BSD license. +Some code related to test-suite is under LGPLv2. diff --git a/SOURCES/README.wsrep_sst_rsync_tunnel b/SOURCES/README.wsrep_sst_rsync_tunnel new file mode 100644 index 0000000..0222b34 --- /dev/null +++ b/SOURCES/README.wsrep_sst_rsync_tunnel @@ -0,0 +1,132 @@ +socat tunnel for encrypted rsync SST +==================================== + +`wsrep_sst_rsync_tunnel` is an extension of the rsync-based [SST](http://galeracluster.com/documentation-webpages/glossary.html#term-state-snapshot-transfer) +implementation that ships with mariadb. Its purpose is to encrypt +communication between the donor and the joiner during an SST. + +Encryption is implemented by means of a socat tunnel, using OPENSSL +addresses. It can be configured via the regular openssl flags exposed +by socat. + + +## How to configure the script + +This SST script can configured by setting a few keys in your favorite +mariadb option file in addition to the usual galera settings. + + [mysqld] + ... + bind_address= + wsrep_sst_method=rsync_tunnel + ... + + [sst] + tca=/path/to/your/ca-file.crt + tcert=/path/to/node/certificate.crt + tkey=/path/to/node/key.key + sockopt= + +When a joiner node requests an SST, `wsrep_sst_rsync_tunnel` uses +socat to listen to incoming SSL connections on port 4444 in lieu of +the original rsync daemon. Received data will be forwarded to the +rscynd daemon started locally to replicate the database. + +When a donor node serves the SST, `wsrep_sst_rsync_tunnel` makes +a series of rsync calls that target a locally started socat daemon. +The daemon tunnels all rsync traffic into an encrypted SSL connection +that targets the joiner's end of the socat tunnel. + +Encryption parameters are specified under the `[sst]` group in the +mariadb option file, where `tkey` and `tcert` are respectively the key +and the certificate that are used by both sides of the socat tunnel. +Each node typically has a different key and cert. Both key and +certificate can be combined into a single PEM file and referenced by +`tcert`. Option `tca` holds a list of the trusted signing +certificates. + +In case you need to tweak the creation of the SSL connection, you can +pass valid socat options (as per socat manual) via the `sockopt` key. +For debugging purpose, the exact socat command that is being executed +shows up in the mariadb log file. + +Note that socat verifies that the certificate's commonName matches +that of the host that is being targeted. The target name comes from +the value configured in `bind_address`, so it's important that it +matches the certificate's commonName. An IP address can be used for +`bind_address`, but you may get into trouble in case different +hostnames resolve to the same IP (e.g. multiple networks per host). + + +## Examples of use + +Suppose you're running a 3-node galera cluster +`node1.my.cluster`, `node2.my.cluster`, `node3.my.cluster`. + +### Scenario: using self-signed certificates + +On each node, create a key and a certificate, and bundle them into a +single PEM file. For instance on `node1.my.cluster`: + + openssl genrsa -out /tls/mysql-$(hostname -f).key 2048 + openssl req -new -key /tls/mysql-$(hostname -f).key -x509 -days 365000 -subj "/CN=$(hostname -f)" -out /tls/mysql-$(hostname -f).crt -batch + cat /tls/mysql-$(hostname -f).key /tls/mysql-$(hostname -f).crt > /tls/mysql.pem + +Then, on each node, create a cafile that will contain all the certs to +trust: + + for n in node1.my.cluster node2.my.cluster node3.my.cluster; do + ssh $n 'cat /tls/mysql-$(hostname -f).crt' >> /tls/all-mysql.crt + done + +Once you have those two files on each host, you can configure the SST +appropriately. For instance from `/etc/my.cnf.d/galera.cnf`: + + [mysqld] + ... + + [sst] + tca=/tls/all-mysql.crt + tcert=/tls/mysql.pem + +### Scenario: using self-signed certificates, without verification + +By default, when socat tries to establish a SSL connection to a peer, +it also verifies that it can trust the peer's certificate. If for some +reason you need to disable that feature, you can amend the previous +configuration with a sockopt option: + + [mysqld] + ... + + [sst] + tca=/tls/all-mysql.crt + tcert=/tls/mysql.pem + sockopt="verify=0" + +The associated sockopt value is passed to socat when +the donor or the joiner configures his part of the tunnel. + +Note: please do not do so in production, this is inherently insecure +as you will not verify the identity of the peer you're connecting to! + +### Scenario: using certificates from a CA + +Suppose you have a FreeIPA service which generated a key file and a +certificate file for the three galera nodes, respectively located at +/tls/mysql.key and /tls/mysql.crt. + +Assuming that the certificate for the FreeIPA server is available at +/etc/ipa/ca.crt, you can configure you galera servers as follows: + + [sst] + tca=/etc/ipa/ca.crt + tcert=/tls/mysql.crt + tkey=/tls/mysql.key + +## License + +Copyright © 2017 [Damien Ciabrini](https://github.com/dciabrin). +This work is derived from the original `wsrep_rsync_sst`, copyright +© 2010-2014 [Codership Oy](https://github.com/codership). +Released under the GNU GPLv2. diff --git a/SOURCES/clustercheck.sh b/SOURCES/clustercheck.sh new file mode 100644 index 0000000..782dbb6 --- /dev/null +++ b/SOURCES/clustercheck.sh @@ -0,0 +1,89 @@ +#!/bin/bash +# +# Script to make a proxy (ie HAProxy) capable of monitoring Galera cluster nodes properly +# +# Author: Olaf van Zandwijk +# Author: Raghavendra Prabhu +# Author: Ryan O'Hara +# +# Documentation and download: https://github.com/olafz/percona-clustercheck +# +# Based on the original script from Unai Rodriguez +# + +if [ -f @INSTALL_SYSCONFDIR@/sysconfig/clustercheck ]; then + . @INSTALL_SYSCONFDIR@/sysconfig/clustercheck +fi + +MYSQL_USERNAME="${MYSQL_USERNAME-clustercheckuser}" +MYSQL_PASSWORD="${MYSQL_PASSWORD-clustercheckpassword!}" +MYSQL_HOST="${MYSQL_HOST:-127.0.0.1}" +MYSQL_PORT="${MYSQL_PORT:-3306}" +ERR_FILE="${ERR_FILE:-/dev/null}" +AVAILABLE_WHEN_DONOR=${AVAILABLE_WHEN_DONOR:-0} +AVAILABLE_WHEN_READONLY=${AVAILABLE_WHEN_READONLY:-1} +DEFAULTS_EXTRA_FILE=${DEFAULTS_EXTRA_FILE:-@INSTALL_SYSCONFDIR@/my.cnf} + +#Timeout exists for instances where mysqld may be hung +TIMEOUT=10 + +if [[ -r $DEFAULTS_EXTRA_FILE ]];then + MYSQL_CMDLINE="mysql --defaults-extra-file=$DEFAULTS_EXTRA_FILE -nNE \ + --connect-timeout=$TIMEOUT \ + --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \ + --host=${MYSQL_HOST} --port=${MYSQL_PORT}" +else + MYSQL_CMDLINE="mysql -nNE --connect-timeout=$TIMEOUT \ + --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \ + --host=${MYSQL_HOST} --port=${MYSQL_PORT}" +fi +# +# Perform the query to check the wsrep_local_state +# +WSREP_STATUS=$($MYSQL_CMDLINE -e "SHOW STATUS LIKE 'wsrep_local_state';" \ + 2>${ERR_FILE} | tail -1 2>>${ERR_FILE}) + +if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] +then + # Check only when set to 0 to avoid latency in response. + if [[ $AVAILABLE_WHEN_READONLY -eq 0 ]];then + READ_ONLY=$($MYSQL_CMDLINE -e "SHOW GLOBAL VARIABLES LIKE 'read_only';" \ + 2>${ERR_FILE} | tail -1 2>>${ERR_FILE}) + + if [[ "${READ_ONLY}" == "ON" ]];then + # Galera cluster node local state is 'Synced', but it is in + # read-only mode. The variable AVAILABLE_WHEN_READONLY is set to 0. + # => return HTTP 503 + # Shell return-code is 1 + echo -en "HTTP/1.1 503 Service Unavailable\r\n" + echo -en "Content-Type: text/plain\r\n" + echo -en "Connection: close\r\n" + echo -en "Content-Length: 35\r\n" + echo -en "\r\n" + echo -en "Galera cluster node is read-only.\r\n" + sleep 0.1 + exit 1 + fi + fi + # Galera cluster node local state is 'Synced' => return HTTP 200 + # Shell return-code is 0 + echo -en "HTTP/1.1 200 OK\r\n" + echo -en "Content-Type: text/plain\r\n" + echo -en "Connection: close\r\n" + echo -en "Content-Length: 32\r\n" + echo -en "\r\n" + echo -en "Galera cluster node is synced.\r\n" + sleep 0.1 + exit 0 +else + # Galera cluster node local state is not 'Synced' => return HTTP 503 + # Shell return-code is 1 + echo -en "HTTP/1.1 503 Service Unavailable\r\n" + echo -en "Content-Type: text/plain\r\n" + echo -en "Connection: close\r\n" + echo -en "Content-Length: 36\r\n" + echo -en "\r\n" + echo -en "Galera cluster node is not synced.\r\n" + sleep 0.1 + exit 1 +fi diff --git a/SOURCES/daemon-scl-helper.sh b/SOURCES/daemon-scl-helper.sh new file mode 100644 index 0000000..7f0ec05 --- /dev/null +++ b/SOURCES/daemon-scl-helper.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +# This helper script is necessary for having proper SELinux context of daemon +# process run in SCL environment via systemd unit file. +# Without this script the process looses SELinux type because /usr/bin/scl +# has context bin_t and unit_t -> bin_t results in unconfined process running. +# If this helper script has the same SELinux context as the original binary, +# the process will have proper SELinux context. +# +# This script was designed to be usable the same as the scl command is used, +# including the collections given as more arguments, separated from binary +# itself by -- separator. +# So it is possible to use the list of collections to be enabled via +# environment file. +# Thus, instead of: +# /usr/bin/scl enable scl1 scl2 -- /path/to/bin arg1 arg2 +# you can use: +# /usr/bin/this-script enable scl1 scl2 -- /path/to/bin arg1 arg2 +# +# Notice: do not forget to set proper SELinux context for this file. +# The context should be the same as the binary running has. +# +# More information at http://bugzilla.redhat.com/show_bug.cgi?id=1172683 + +action="$1" +shift + +while [ -n "$1" ] && [ "$1" != "--" ] ; do + source scl_source "$action" "$1" + shift +done + +if [ $# -le 2 ] ; then + echo "Usage `basename $0` enable sclname [sclname ...] -- /path/to/bin [arg ...]" >&2 + exit 1 +fi + +shift + +exec "$@" + + + diff --git a/SOURCES/mariadb-groonga.patch b/SOURCES/mariadb-groonga.patch new file mode 100644 index 0000000..3a0e74c --- /dev/null +++ b/SOURCES/mariadb-groonga.patch @@ -0,0 +1,30 @@ +# Fixing conflict with groonga package +# https://bugzilla.redhat.com/show_bug.cgi?id=1763287 + +--- mariadb-10.3.18/storage/mroonga/vendor/groonga/CMakeLists.txt.withoutoption 2019-11-11 14:01:07.762595716 +0100 ++++ mariadb-10.3.18/storage/mroonga/vendor/groonga/CMakeLists.txt 2019-11-11 14:33:05.224012458 +0100 +@@ -86,7 +86,9 @@ + set(INCLUDE_DIR "include") + set(GRN_INCLUDE_DIR "include/groonga") + set(DATA_DIR "share") +-set(GRN_DATA_DIR "${DATA_DIR}/${GRN_PROJECT_NAME}") ++if(NOT DEFINED GRN_DATA_DIR) ++ set(GRN_DATA_DIR "${DATA_DIR}/${GRN_PROJECT_NAME}") ++endif() + set(CONFIG_DIR "etc") + set(GRN_CONFIG_DIR "${CONFIG_DIR}/${GRN_PROJECT_NAME}") + set(GRN_CONFIG_PATH "${CMAKE_INSTALL_PREFIX}/${GRN_CONFIG_DIR}/groonga.conf") + +--- mariadb-10.3.18/storage/mroonga/vendor/groonga/vendor/plugins/groonga-normalizer-mysql/CMakeLists.txt.withoutoption 2019-11-11 14:34:22.661005715 +0100 ++++ mariadb-10.3.18/storage/mroonga/vendor/groonga/vendor/plugins/groonga-normalizer-mysql/CMakeLists.txt 2019-11-11 14:35:59.962244120 +0100 +@@ -16,7 +16,9 @@ + # MA 02110-1335 USA + + cmake_minimum_required(VERSION 2.6) +-set(GROONGA_NORMALIZER_MYSQL_PROJECT_NAME "groonga-normalizer-mysql") ++if (NOT DEFINED GROONGA_NORMALIZER_MYSQL_PROJECT_NAME) ++ set(GROONGA_NORMALIZER_MYSQL_PROJECT_NAME "groonga-normalizer-mysql") ++endif() + project("${GROONGA_NORMALIZER_MYSQL_PROJECT_NAME}") + + if(DEFINED GROONGA_NORMALIZER_MYSQL_EMBED) diff --git a/SOURCES/mariadb-logrotate.patch b/SOURCES/mariadb-logrotate.patch new file mode 100644 index 0000000..aa46e59 --- /dev/null +++ b/SOURCES/mariadb-logrotate.patch @@ -0,0 +1,81 @@ +Adjust the mysql-log-rotate script in several ways: + +* Use the correct log file pathname for Red Hat installations. +* Enable creation of the log file by logrotate (needed since + /var/log/ isn't writable by mysql user); and set the same 640 + permissions we normally use. +* Comment out the actual rotation commands, so that user must edit + the file to enable rotation. This is unfortunate, but the fact + that the script will probably fail without manual configuration + (to set a root password) means that we can't really have it turned + on by default. Fortunately, in most configurations the log file + is low-volume and so rotation is not critical functionality. + +See discussions at RH bugs 799735, 547007 +* Note they are from Fedora 15 / 16 + +Update 3/2017 +* it would be big unexpected change for anyone upgrading, if we start shipping it now. + Maybe it is good candidate for shipping with MariaDB 10.2 ? +* the 'mysqladmin flush logs' doesn´t guarantee, no entries are lost + during flushing, the operation is not atomic. + We should not ship it in that state + +Update 6/2018 +* the SIGHUP causes server to flush all logs. No password admin needed, the only constraint is + beeing able to send the SIGHUP to the process and read the mysqld pid file, which root can. +* Submited as PR: https://github.com/MariaDB/server/pull/807 + +Update 02/2021 +* Enhance the script as proposed in: + https://mariadb.com/kb/en/rotating-logs-on-unix-and-linux/ +* Discussion continues in: + https://jira.mariadb.org/browse/MDEV-16621 + +--- mariadb-10.5.8/support-files/mysql-log-rotate.sh 2021-02-12 08:37:47.857289694 +0100 ++++ mariadb-10.5.8/support-files/mysql-log-rotate.sh_pacthed 2021-02-12 08:40:26.420372325 +0100 +@@ -3,35 +3,22 @@ + # in the [mysqld] section as follows: + # + # [mysqld] +-# log-error=@localstatedir@/mysqld.log +-# +-# If the root user has a password you have to create a +-# /root/.my.cnf configuration file with the following +-# content: +-# +-# [mysqladmin] +-# password = +-# user= root +-# +-# where "" is the password. +-# +-# ATTENTION: This /root/.my.cnf should be readable ONLY +-# for root ! ++# log-error=@LOG_LOCATION@ + +-@localstatedir@/mysqld.log { +- # create 600 mysql mysql ++@LOG_LOCATION@ { ++ create 600 mysql mysql + notifempty + daily + rotate 3 + missingok + compress ++ delaycompress ++ sharedscripts + postrotate + # just if mariadbd is really running +- if test -x @bindir@/mysqladmin && \ +- @bindir@/mysqladmin ping &>/dev/null +- then +- @bindir@/mysqladmin --local flush-error-log \ +- flush-engine-log flush-general-log flush-slow-log +- fi ++ if [ -e @PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid ] ++ then ++ kill -1 $(<@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid) ++ fi + endscript + } diff --git a/SOURCES/mariadb-ownsetup.patch b/SOURCES/mariadb-ownsetup.patch new file mode 100644 index 0000000..7728cf1 --- /dev/null +++ b/SOURCES/mariadb-ownsetup.patch @@ -0,0 +1,31 @@ +--- mariadb-10.4.14/support-files/CMakeLists.txt 2020-08-06 17:28:28.000000000 +0200 ++++ mariadb-10.4.14/support-files/CMakeLists.txt_patched 2020-09-03 13:21:07.826658279 +0200 +@@ -187,6 +187,7 @@ IF(UNIX) + COMPONENT SharedLibraries) + INSTALL(FILES rpm/mysql-clients.cnf DESTINATION ${INSTALL_SYSCONF2DIR} + COMPONENT Client) ++ CONFIGURE_FILE(rpm/server.cnf ${CMAKE_CURRENT_SOURCE_DIR}/rpm/server.cnf @ONLY) + INSTALL(FILES rpm/server.cnf DESTINATION ${INSTALL_SYSCONF2DIR} + COMPONENT IniFiles) + INSTALL(FILES rpm/enable_encryption.preset DESTINATION ${INSTALL_SYSCONF2DIR} + +diff -up mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup mariadb-10.0.15/support-files/rpm/server.cnf +--- mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup 2015-01-24 23:55:55.110063592 +0100 ++++ mariadb-10.0.15/support-files/rpm/server.cnf 2015-01-24 23:57:42.308114387 +0100 +@@ -9,7 +9,16 @@ + [server] + + # this is only for the mysqld standalone daemon ++# Settings user and group are ignored when systemd is used. ++# If you need to run mysqld under a different user or group, ++# customize your systemd unit file for mysqld/mariadb according to the ++# instructions in http://fedoraproject.org/wiki/Systemd + [mysqld] ++datadir=@MYSQL_DATADIR@ ++socket=@MYSQL_UNIX_ADDR@ ++log-error=@LOG_LOCATION@ ++pid-file=@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid ++ + + # + # * Galera-related settings diff --git a/SOURCES/mariadb-pcdir.patch b/SOURCES/mariadb-pcdir.patch new file mode 100644 index 0000000..117273a --- /dev/null +++ b/SOURCES/mariadb-pcdir.patch @@ -0,0 +1,19 @@ +Use PCDIR CMake option, if configured + +Upstream install the server pkgconfig file into arch-independent directory +Reported to upstream as: https://jira.mariadb.org/browse/MDEV-14340 + +--- mariadb-10.5.5/support-files/CMakeLists.txt.old 2020-09-30 10:36:08.582490318 +0200 ++++ mariadb-10.5.5/support-files/CMakeLists.txt 2020-09-30 10:38:58.079710848 +0200 +@@ -91,7 +91,11 @@ + ENDIF() + + CONFIGURE_FILE(mariadb.pc.in ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc @ONLY) ++IF(INSTALL_PCDIR) ++ INSTALL(FILES ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc DESTINATION ${INSTALL_PCDIR} COMPONENT Development) ++ELSE() + INSTALL(FILES ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc DESTINATION ${INSTALL_LIBDIR}/pkgconfig COMPONENT Development) ++ENDIF() + + INSTALL(FILES mysql.m4 DESTINATION ${INSTALL_SHAREDIR}/aclocal COMPONENT Development) + diff --git a/SOURCES/mariadb-scl-env-check.patch b/SOURCES/mariadb-scl-env-check.patch new file mode 100644 index 0000000..3a882ac --- /dev/null +++ b/SOURCES/mariadb-scl-env-check.patch @@ -0,0 +1,154 @@ +diff -up mariadb-10.3.11/scripts/galera_new_cluster.sh.p90 mariadb-10.3.11/scripts/galera_new_cluster.sh +--- mariadb-10.3.11/scripts/galera_new_cluster.sh.p90 2018-12-18 17:47:15.963970827 +0100 ++++ mariadb-10.3.11/scripts/galera_new_cluster.sh 2018-12-18 17:47:37.917160998 +0100 +@@ -22,7 +22,7 @@ EOF + fi + + systemctl set-environment _WSREP_NEW_CLUSTER='--wsrep-new-cluster' && \ +- systemctl start ${1:-mariadb} ++ systemctl start ${1:-@DAEMON_NAME@} + + extcode=$? + +diff -up mariadb-10.3.11/scripts/mysqld_safe.sh.p90 mariadb-10.3.11/scripts/mysqld_safe.sh +--- mariadb-10.3.11/scripts/mysqld_safe.sh.p90 2018-12-18 17:45:20.907974139 +0100 ++++ mariadb-10.3.11/scripts/mysqld_safe.sh 2018-12-18 17:45:20.910974165 +0100 +@@ -11,6 +11,12 @@ + # mysql.server works by first doing a cd to the base directory and from there + # executing mysqld_safe + ++# we want start daemon only inside "scl enable" invocation ++if ! scl_enabled @SCL_NAME@ ; then ++ echo "Use \"scl enable @SCL_NAME@ 'service ...'\" invocation" ++ exit 1 ++fi ++ + # Initialize script globals + KILL_MYSQLD=1; + MYSQLD= +diff -up mariadb-10.3.11/scripts/mysql_install_db.sh.p90 mariadb-10.3.11/scripts/mysql_install_db.sh +--- mariadb-10.3.11/scripts/mysql_install_db.sh.p90 2018-12-18 17:45:20.906974130 +0100 ++++ mariadb-10.3.11/scripts/mysql_install_db.sh 2018-12-18 17:45:20.910974165 +0100 +@@ -19,6 +19,12 @@ + # + # All unrecognized arguments to this script are passed to mysqld. + ++# we want start daemon only inside "scl enable" invocation ++if ! scl_enabled @SCL_NAME@ ; then ++ echo "Use \"scl enable @SCL_NAME@ 'service ...'\" invocation" ++ exit 1 ++fi ++ + basedir="" + builddir="" + ldata="@localstatedir@" +@@ -514,16 +520,16 @@ else + echo "The problem could be conflicting information in an external" + echo "my.cnf files. You can ignore these by doing:" + echo +- echo " shell> $0 --defaults-file=~/.my.cnf" ++ echo " shell> su -s /bin/bash - mysql -c 'scl enable @SCL_NAME@ -- $0 --defaults-file=~/.my.cnf'" + echo + echo "You can also try to start the mysqld daemon with:" + echo +- echo " shell> $mysqld --skip-grant-tables --general-log &" ++ echo " shell> su -s /bin/bash - mysql -c 'scl enable @SCL_NAME@ -- $mysqld --skip-grant-tables --general-log &'" + echo + echo "and use the command line tool $bindir/mysql" + echo "to connect to the mysql database and look at the grant tables:" + echo +- echo " shell> $bindir/mysql -u root mysql" ++ echo " shell> su -s /bin/bash - mysql -c 'scl enable @SCL_NAME@ -- $bindir/mysql -u root mysql''" + echo " mysql> show tables;" + echo + echo "Try 'mysqld --help' if you have problems with paths. Using" +@@ -543,10 +549,6 @@ fi + # the screen. + if test "$cross_bootstrap" -eq 0 && test -z "$srcdir" + then +- s_echo +- s_echo "To start mysqld at boot time you have to copy" +- s_echo "support-files/mysql.server to the right place for your system" +- + if test "$auth_root_authentication_method" = normal + then + echo +@@ -554,11 +556,11 @@ then + echo "PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !" + echo "To do so, start the server, then issue the following commands:" + echo +- echo "'$bindir/mysqladmin' -u root password 'new-password'" +- echo "'$bindir/mysqladmin' -u root -h $hostname password 'new-password'" ++ echo "scl enable @SCL_NAME@ -- '$bindir/mysqladmin' -u root password 'new-password'" ++ echo "scl enable @SCL_NAME@ -- '$bindir/mysqladmin' -u root -h $hostname password 'new-password'" + echo + echo "Alternatively you can run:" +- echo "'$bindir/mysql_secure_installation'" ++ echo "scl enable @SCL_NAME@ -- '$bindir/mysql_secure_installation'" + echo + echo "which will also give you the option of removing the test" + echo "databases and anonymous user created by default. This is" +@@ -577,6 +579,8 @@ then + echo + echo "You can test the MariaDB daemon with mysql-test-run.pl" + echo "cd '$basedir/mysql-test' ; perl mysql-test-run.pl" ++ echo "after installing @SCL_NAME@-mariadb-test package." ++ echo "See @prefix@/share/mysql-test/README for instructions." + fi + + echo +diff -up mariadb-10.3.11/scripts/mysql.service.in.p90 mariadb-10.3.11/scripts/mysql.service.in +--- mariadb-10.3.11/scripts/mysql.service.in.p90 2018-12-18 17:45:20.909974156 +0100 ++++ mariadb-10.3.11/scripts/mysql.service.in 2018-12-18 17:45:20.910974165 +0100 +@@ -40,14 +40,20 @@ Type=notify + User=mysql + Group=mysql + +-ExecStartPre=@libexecdir@/mysql-check-socket ++# Load collections set to enabled for this service ++EnvironmentFile=@SCL_SCRIPTS@/service-environment ++ ++# We want to start server only inside "scl enable" invocation ++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- /usr/bin/scl_enabled @SCL_NAME@ ++ ++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-socket + # '%n' expands to 'Full unit name'; man systemd.unit +-ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n ++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-prepare-db-dir %n + # MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf + # Note: we set --basedir to prevent probes that might trigger SELinux alarms, + # per bug #547485 +-ExecStart=@libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER +-ExecStartPost=@libexecdir@/mysql-check-upgrade ++ExecStart=@libexecdir@/mysqld-scl-helper enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER ++ExecStartPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-upgrade + + # Setting this to true can break replication and the Type=notify settings + # See also bind-address mysqld option. +diff -up mariadb-10.3.11/scripts/mysql@.service.in.p90 mariadb-10.3.11/scripts/mysql@.service.in +--- mariadb-10.3.11/scripts/mysql@.service.in.p90 2018-12-18 17:45:20.909974156 +0100 ++++ mariadb-10.3.11/scripts/mysql@.service.in 2018-12-18 17:45:20.910974165 +0100 +@@ -47,13 +47,19 @@ Type=notify + User=mysql + Group=mysql + +-ExecStartPre=@libexecdir@/mysql-check-socket --defaults-group-suffix=.%I +-ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n ++# Load collections set to enabled for this service ++EnvironmentFile=@SCL_SCRIPTS@/service-environment ++ ++# We want to start server only inside "scl enable" invocation ++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- /usr/bin/scl_enabled @SCL_NAME@ ++ ++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-socket --defaults-group-suffix=.%I ++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n + # MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf + # Note: we set --basedir to prevent probes that might trigger SELinux alarms, + # per bug #547485 +-ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER +-ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I ++ExecStart=@libexecdir@/mysqld-scl-helper enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER ++ExecStartPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I + + # Setting this to true can break replication and the Type=notify settings + # See also bind-address mysqld option. diff --git a/SOURCES/mariadb-scripts.patch b/SOURCES/mariadb-scripts.patch new file mode 100644 index 0000000..74914b1 --- /dev/null +++ b/SOURCES/mariadb-scripts.patch @@ -0,0 +1,41 @@ +We have some downstream patches and other scripts that include variables to +be expanded by cmake. Cmake needs to know about them, so adding them manually. + + # Install libgcc as mylibgcc.a +--- mariadb-10.5.5/scripts/CMakeLists.txt.old 2020-09-24 10:13:35.272589689 +0200 ++++ mariadb-10.5.5/scripts/CMakeLists.txt 2020-09-24 10:17:31.428985798 +0200 +@@ -377,6 +377,34 @@ + INSTALL_LINK(${file} ${binname} ${INSTALL_BINDIR} ${${file}_COMPONENT}) + ENDIF() + ENDFOREACH() ++ ++ # files for systemd ++ SET(SYSTEMD_SCRIPTS ++ mysql.tmpfiles.d ++ mysql.service ++ mysql@.service ++ mysql-prepare-db-dir ++ mysql-check-socket ++ mysql-check-upgrade ++ mysql-scripts-common ++ mysql_config_multilib ++ clustercheck ++ galera_new_cluster ++ my.cnf ++ ) ++ FOREACH(file ${SYSTEMD_SCRIPTS}) ++ IF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh) ++ CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh ++ ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY) ++ ELSEIF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.in) ++ CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.in ++ ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY) ++ ELSE() ++ MESSAGE(FATAL_ERROR "Can not find ${file}.sh or ${file}.in in " ++ "${CMAKE_CURRENT_SOURCE_DIR}" ) ++ ENDIF() ++ ENDFOREACH() ++ + ENDIF() + + # Install libgcc as mylibgcc.a diff --git a/SOURCES/mariadb-server-galera.te b/SOURCES/mariadb-server-galera.te new file mode 100644 index 0000000..bdce127 --- /dev/null +++ b/SOURCES/mariadb-server-galera.te @@ -0,0 +1,23 @@ + +module mariadb-server-galera 1.0; + +require { + type mysqld_t; + type rsync_exec_t; + type anon_inodefs_t; + type proc_net_t; + type kerberos_port_t; + class file { read execute execute_no_trans getattr open }; + class tcp_socket { name_bind name_connect }; + class process { setpgid siginh rlimitinh noatsecure }; +} + +# allow mysqld to run rsyncd +allow mysqld_t self:process setpgid; +allow mysqld_t rsync_exec_t:file { read execute execute_no_trans getattr open }; +allow mysqld_t anon_inodefs_t:file getattr; +allow mysqld_t proc_net_t:file { read open }; + +# allow rsyncd to listen on port 4444 +allow mysqld_t kerberos_port_t:tcp_socket { name_bind name_connect }; + diff --git a/SOURCES/mariadb-ssl-cipher-tests.patch b/SOURCES/mariadb-ssl-cipher-tests.patch new file mode 100644 index 0000000..567e433 --- /dev/null +++ b/SOURCES/mariadb-ssl-cipher-tests.patch @@ -0,0 +1,13 @@ +diff -up mariadb-10.3.9/mysql-test/main/ssl_cipher.test.fixtest mariadb-10.3.9/mysql-test/main/ssl_cipher.test +--- mariadb-10.3.13/mysql-test/main/ssl_cipher.test 2019-02-20 08:59:09.000000000 +0100 ++++ mariadb-10.3.13/mysql-test/main/ssl_cipher.test_patched 2019-02-22 11:22:01.250256060 +0100 +@@ -97,7 +97,9 @@ drop user mysqltest_1@localhost; + let $restart_parameters=--ssl-cipher=AES128-SHA; + source include/restart_mysqld.inc; + connect (ssl_con,localhost,root,,,,,SSL); ++--replace_regex /TLS_AES_.*/AES128-SHA/ + SHOW STATUS LIKE 'Ssl_cipher'; ++--replace_regex /TLS_AES_.*/AES128-SHA/ + SHOW STATUS LIKE 'Ssl_cipher_list'; + disconnect ssl_con; + connection default; diff --git a/SOURCES/my.cnf.in b/SOURCES/my.cnf.in new file mode 100644 index 0000000..247e12d --- /dev/null +++ b/SOURCES/my.cnf.in @@ -0,0 +1,18 @@ +# +# This group is read both both by the client and the server +# use it for options that affect everything +# +[client-server] + +# +# This group is read by the server +# +[mysqld] +# Disabling symbolic-links is recommended to prevent assorted security risks +symbolic-links=0 + +# +# include all files from the config directory +# +!includedir @INSTALL_SYSCONF2DIR@ + diff --git a/SOURCES/mysql-check-socket.sh b/SOURCES/mysql-check-socket.sh new file mode 100644 index 0000000..407523f --- /dev/null +++ b/SOURCES/mysql-check-socket.sh @@ -0,0 +1,39 @@ +#!/bin/sh + +# We check if there is already a process using the socket file, +# since otherwise the systemd service file could report false +# positive result when starting and mysqld_safe could remove +# a socket file, which is actually being used by a different daemon. + +source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common" + +if test -e "$socketfile" ; then + echo "Socket file $socketfile exists." >&2 + + # no write permissions + if ! test -w "$socketfile" ; then + echo "Not enough permission to write to the socket file $socketfile, which is suspicious." >&2 + echo "Please, remove $socketfile manually to start the service." >&2 + exit 1 + fi + + # not a socket file + if ! test -S "$socketfile" ; then + echo "The file $socketfile is not a socket file, which is suspicious." >&2 + echo "Please, remove $socketfile manually to start the service." >&2 + exit 1 + fi + + # some process uses the socket file + response=`@bindir@/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER --connect-timeout="${CHECKSOCKETTIMEOUT:-10}" ping 2>&1` + if [ $? -eq 0 ] || echo "$response" | grep -q "Access denied for user" ; then + echo "Is another MySQL daemon already running with the same unix socket?" >&2 + echo "Please, stop the process using the socket $socketfile or remove the file manually to start the service." >&2 + exit 1 + fi + + # socket file is a garbage + echo "No process is using $socketfile, which means it is a garbage, so it will be removed automatically." >&2 +fi + +exit 0 diff --git a/SOURCES/mysql-check-upgrade.sh b/SOURCES/mysql-check-upgrade.sh new file mode 100644 index 0000000..1bfd3bc --- /dev/null +++ b/SOURCES/mysql-check-upgrade.sh @@ -0,0 +1,39 @@ +#!/bin/sh + +source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common" + +upgrade_info_file="$datadir/mysql_upgrade_info" +version=0 +# get version as integer from mysql_upgrade_info file +if [ -f "$upgrade_info_file" ] && [ -r "$upgrade_info_file" ] ; then + version_major=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\1/') + version_minor=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\2/') + if [[ $version_major =~ ^[0-9]+$ ]] && [[ $version_minor =~ ^[0-9]+$ ]] ; then + version=$((version_major*100+version_minor)) + fi +fi + +# compute current version as integer +thisversion=$((@MAJOR_VERSION@*100+@MINOR_VERSION@)) + +# provide warning in cases we should run mysql_upgrade +if [ $version -ne $thisversion ] ; then + + # give extra warning if some version seems to be skipped + if [ $version -gt 0 ] && [ $version -lt 505 ] ; then + echo "The datadir located at $datadir seems to be older than of a version 5.5. Please, mind that as a general rule, to upgrade from one release series to another, go to the next series rather than skipping a series." >&2 + fi + + cat <&2 +The datadir located at $datadir needs to be upgraded using 'mysql_upgrade' tool. This can be done using the following steps: + + 1. Back-up your data before with 'mysql_upgrade' + 2. Start the database daemon using 'service @DAEMON_NAME@ start' + 3. Run 'mysql_upgrade' with a database user that has sufficient privileges + +Read more about 'mysql_upgrade' usage at: +https://mariadb.com/kb/en/mariadb/documentation/sql-commands/table-commands/mysql_upgrade/ +EOF +fi + +exit 0 diff --git a/SOURCES/mysql-prepare-db-dir.sh b/SOURCES/mysql-prepare-db-dir.sh new file mode 100644 index 0000000..a82479f --- /dev/null +++ b/SOURCES/mysql-prepare-db-dir.sh @@ -0,0 +1,137 @@ +#!/bin/sh + +# This script creates the mysql data directory during first service start. +# In subsequent starts, it does nothing much. + +source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common" + +export LC_ALL=C + +# Returns content of the specified directory +# If listing files fails, fake-file is returned so which means +# we'll behave like there was some data initialized +# Some files or directories are fine to be there, so those are +# explicitly removed from the listing +# @param datadir +list_datadir () +{ + ( ls -1A "$1" 2>/dev/null || echo "fake-file" ) | grep -v \ + -e '^lost+found$' \ + -e '\.err$' \ + -e '^.bash_history$' +} + +# Checks whether datadir should be initialized +# @param datadir +should_initialize () +{ + test -z "$(list_datadir "$1")" +} + +# If two args given first is user, second is group +# otherwise the arg is the systemd service file +if [ "$#" -eq 2 ] +then + myuser="$1" + mygroup="$2" +else + # Absorb configuration settings from the specified systemd service file, + # or the default service if not specified + SERVICE_NAME="$1" + if [ x"$SERVICE_NAME" = x ] + then + SERVICE_NAME=@DAEMON_NAME@.service + fi + + myuser=`systemctl show -p User "${SERVICE_NAME}" | + sed 's/^User=//'` + if [ x"$myuser" = x ] + then + myuser=mysql + fi + + mygroup=`systemctl show -p Group "${SERVICE_NAME}" | + sed 's/^Group=//'` + if [ x"$mygroup" = x ] + then + mygroup=mysql + fi +fi + +# Set up the errlogfile with appropriate permissions +if [ ! -e "$errlogfile" -a ! -h "$errlogfile" -a x$(dirname "$errlogfile") = "x/var/log" ]; then + case $(basename "$errlogfile") in + mysql*.log|mariadb*.log) install /dev/null -m0640 -o$myuser -g$mygroup "$errlogfile" ;; + *) ;; + esac +else + # Provide some advice if the log file cannot be created by this script + errlogdir=$(dirname "$errlogfile") + if ! [ -d "$errlogdir" ] ; then + echo "The directory $errlogdir does not exist." >&2 + exit 1 + elif [ -e "$errlogfile" -a ! -w "$errlogfile" ] ; then + echo "The log file $errlogfile cannot be written, please, fix its permissions." >&2 + echo "The daemon will be run under $myuser:$mygroup" >&2 + exit 1 + fi +fi + +# Make the data directory if doesn't exist or empty +if should_initialize "$datadir" ; then + # First, make sure $datadir is there with correct permissions + # (note: if it's not, and we're not root, this'll fail ...) + if [ ! -e "$datadir" -a ! -h "$datadir" ] + then + mkdir -p "$datadir" || exit 1 + fi + chown "$myuser:$mygroup" "$datadir" + chmod 0755 "$datadir" + [ -x /sbin/restorecon ] && /sbin/restorecon "$datadir" + + # Now create the database + echo "Initializing @NICE_PROJECT_NAME@ database" >&2 + # Avoiding deletion of files not created by mysql_install_db is + # guarded by time check and sleep should help work-arounded + # potential issues on systems with 1 second resolution timestamps + # https://bugzilla.redhat.com/show_bug.cgi?id=1335849#c19 + INITDB_TIMESTAMP=`LANG=C date -u` + sleep 1 + @bindir@/mysql_install_db --rpm --datadir="$datadir" --user="$myuser" --skip-test-db >&2 + ret=$? + if [ $ret -ne 0 ] ; then + echo "Initialization of @NICE_PROJECT_NAME@ database failed." >&2 + echo "Perhaps @sysconfdir@/my.cnf is misconfigured or there is some problem with permissions of $datadir." >&2 + # Clean up any partially-created database files + if [ ! -e "$datadir/mysql/user.frm" ] && [ -d "$datadir" ] ; then + echo "Initialization of @NICE_PROJECT_NAME@ database was not finished successfully." >&2 + echo "Files created so far will be removed." >&2 + find "$datadir" -mindepth 1 -maxdepth 1 -newermt "$INITDB_TIMESTAMP" \ + -not -name "lost+found" -exec rm -rf {} + + if [ $? -ne 0 ] ; then + echo "Removing of created files was not successfull." >&2 + echo "Please, clean directory $datadir manually." >&2 + fi + else + echo "However, part of data has been initialized and those will not be removed." >&2 + echo "Please, clean directory $datadir manually." >&2 + fi + exit $ret + fi + # upgrade does not need to be run on a fresh datadir + echo "@VERSION@-MariaDB" >"$datadir/mysql_upgrade_info" +else + if [ -d "$datadir/mysql/" ] ; then + # mysql dir exists, it seems data are initialized properly + echo "Database @NICE_PROJECT_NAME@ is probably initialized in $datadir already, nothing is done." + echo "If this is not the case, make sure the $datadir is empty before running `basename $0`." + else + # if the directory is not empty but mysql/ directory is missing, then + # print error and let user to initialize manually or empty the directory + echo "Database @NICE_PROJECT_NAME@ is not initialized, but the directory $datadir is not empty, so initialization cannot be done." >&2 + echo "Make sure the $datadir is empty before running `basename $0`." >&2 + exit 1 + fi +fi + +exit 0 diff --git a/SOURCES/mysql-scripts-common.sh b/SOURCES/mysql-scripts-common.sh new file mode 100644 index 0000000..e270433 --- /dev/null +++ b/SOURCES/mysql-scripts-common.sh @@ -0,0 +1,68 @@ +#!/bin/sh + +# Some useful functions used in other MySQL helper scripts +# This scripts defines variables datadir, errlogfile, socketfile + +export LC_ALL=C + +# extract value of a MySQL option from config files +# Usage: get_mysql_option VARNAME DEFAULT SECTION [ SECTION, ... ] +# result is returned in $result +# We use my_print_defaults which prints all options from multiple files, +# with the more specific ones later; hence take the last match. +get_mysql_option(){ + if [ $# -ne 3 ] ; then + echo "get_mysql_option requires 3 arguments: section option default_value" + return + fi + sections="$1" + option_name="$2" + default_value="$3" + result=`@bindir@/my_print_defaults $my_print_defaults_extra_args $sections | sed -n "s/^--${option_name}=//p" | tail -n 1` + if [ -z "$result" ]; then + # not found, use default + result="${default_value}" + fi +} + +# For the case of running more instances via systemd, scrits that source +# this file can get --default-group-suffix or similar option as the first +# argument. The utility my_print_defaults needs to use it as well, so the +# scripts sourcing this file work with the same options as the daemon. +my_print_defaults_extra_args='' +while echo "$1" | grep -q '^--defaults' ; do + my_print_defaults_extra_args="${my_print_defaults_extra_args} $1" + shift +done + +# Defaults here had better match what mysqld_safe will default to +# The option values are generally defined on three important places +# on the default installation: +# 1) default values are hardcoded in the code of mysqld daemon or +# mysqld_safe script +# 2) configurable values are defined in @sysconfdir@/my.cnf +# 3) default values for helper scripts are specified bellow +# So, in case values are defined in my.cnf, we need to get that value. +# In case they are not defined in my.cnf, we need to get the same value +# in the daemon, as in the helper scripts. Thus, default values here +# must correspond with values defined in mysqld_safe script and source +# code itself. + +server_sections="mysqld_safe mysqld server mysqld-@MAJOR_VERSION@.@MINOR_VERSION@ mariadb mariadb-@MAJOR_VERSION@.@MINOR_VERSION@ client-server" + +get_mysql_option "$server_sections" datadir "@MYSQL_DATADIR@" +datadir="$result" + +# if there is log_error in the my.cnf, my_print_defaults still +# returns log-error +# log-error might be defined in mysqld_safe and mysqld sections, +# the former has bigger priority +get_mysql_option "$server_sections" log-error "$datadir/`uname -n`.err" +errlogfile="$result" + +get_mysql_option "$server_sections" socket "@MYSQL_UNIX_ADDR@" +socketfile="$result" + +get_mysql_option "$server_sections" pid-file "$datadir/`uname -n`.pid" +pidfile="$result" + diff --git a/SOURCES/mysql.service.in b/SOURCES/mysql.service.in new file mode 100644 index 0000000..6f84dd3 --- /dev/null +++ b/SOURCES/mysql.service.in @@ -0,0 +1,73 @@ +# It's not recommended to modify this file in-place, because it will be +# overwritten during package upgrades. If you want to customize, the +# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service", +# containing +# .include /usr/lib/systemd/system/@DAEMON_NAME@.service +# ...make your changes here... +# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf", +# which doesn't need to include ".include" call and which will be parsed +# after the file @DAEMON_NAME@.service itself is parsed. +# +# For more info about custom unit files, see systemd.unit(5) or +# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F + +# For example, if you want to increase mysql's open-files-limit to 10000, +# you need to increase systemd's LimitNOFILE setting, so create a file named +# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing: +# [Service] +# LimitNOFILE=10000 + +# Note: /usr/lib/... is recommended in the .include line though /lib/... +# still works. +# Don't forget to reload systemd daemon after you change unit configuration: +# root> systemctl --system daemon-reload + +# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance. + +[Unit] +Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server +Documentation=man:mysqld(8) +Documentation=https://mariadb.com/kb/en/library/systemd/ +After=network.target + +[Install] +WantedBy=multi-user.target +Alias=mysql.service +Alias=mysqld.service + +[Service] +Type=notify +User=mysql +Group=mysql + +ExecStartPre=@libexecdir@/mysql-check-socket +# '%n' expands to 'Full unit name'; man systemd.unit +ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n +# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf +# Note: we set --basedir to prevent probes that might trigger SELinux alarms, +# per bug #547485 +ExecStart=@libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER +ExecStartPost=@libexecdir@/mysql-check-upgrade + +# Setting this to true can break replication and the Type=notify settings +# See also bind-address mysqld option. +PrivateNetwork=false + +KillMode=process +KillSignal=SIGTERM + +# Don't want to see an automated SIGKILL ever +SendSIGKILL=no + +# Restart crashed server only, on-failure would also restart, for example, when +# my.cnf contains unknown option +Restart=on-abort +RestartSec=5s + +UMask=007 + +# Give a reasonable amount of time for the server to start up/shut down +TimeoutSec=300 + +# Place temp files in a secure directory, not /tmp +PrivateTmp=true diff --git a/SOURCES/mysql.tmpfiles.d.in b/SOURCES/mysql.tmpfiles.d.in new file mode 100644 index 0000000..9e6b6e8 --- /dev/null +++ b/SOURCES/mysql.tmpfiles.d.in @@ -0,0 +1,3 @@ +# Do not edit this file. +# To override this, put /etc/tmpfiles.d/mariadb.conf instead. +d @PID_FILE_DIR@ 0755 mysql mysql - diff --git a/SOURCES/mysql@.service.in b/SOURCES/mysql@.service.in new file mode 100644 index 0000000..b36ce6d --- /dev/null +++ b/SOURCES/mysql@.service.in @@ -0,0 +1,79 @@ +# Multi instance version of mariadb. For if you run mutiple verions at once. +# Also used for @DAEMON_NAME@@bootstrap to bootstrap Galera. +# +# To use multi instance variant, use [mysqld.INSTANCENAME] as sections in my.cnf +# and start the service via: +# systemctl start @DAEMON_NAME@@{instancename}.server +# +# It's not recommended to modify this file in-place, because it will be +# overwritten during package upgrades. If you want to customize, the +# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service", +# containing +# .include /usr/lib/systemd/system/@DAEMON_NAME@.service +# ...make your changes here... +# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf", +# which doesn't need to include ".include" call and which will be parsed +# after the file @DAEMON_NAME@.service itself is parsed. +# +# For more info about custom unit files, see systemd.unit(5) or +# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F + +# For example, if you want to increase mysql's open-files-limit to 10000, +# you need to increase systemd's LimitNOFILE setting, so create a file named +# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing: +# [Service] +# LimitNOFILE=10000 + +# Note: /usr/lib/... is recommended in the .include line though /lib/... +# still works. +# Don't forget to reload systemd daemon after you change unit configuration: +# root> systemctl --system daemon-reload + +# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance. + +[Unit] +Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server +Documentation=man:mysqld(8) +Documentation=https://mariadb.com/kb/en/library/systemd/ +After=network.target + +[Install] +WantedBy=multi-user.target +Alias=mysql.service +Alias=mysqld.service + +[Service] +Type=notify +User=mysql +Group=mysql + +ExecStartPre=@libexecdir@/mysql-check-socket --defaults-group-suffix=.%I +ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n +# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf +# Note: we set --basedir to prevent probes that might trigger SELinux alarms, +# per bug #547485 +ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER +ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I + +# Setting this to true can break replication and the Type=notify settings +# See also bind-address mysqld option. +PrivateNetwork=false + +KillMode=process +KillSignal=SIGTERM + +# Don't want to see an automated SIGKILL ever +SendSIGKILL=no + +# Restart crashed server only, on-failure would also restart, for example, when +# my.cnf contains unknown option +Restart=on-abort +RestartSec=5s + +UMask=007 + +# Give a reasonable amount of time for the server to start up/shut down +TimeoutSec=300 + +# Place temp files in a secure directory, not /tmp +PrivateTmp=true diff --git a/SOURCES/mysql_config_multilib.sh b/SOURCES/mysql_config_multilib.sh new file mode 100644 index 0000000..06c2a2b --- /dev/null +++ b/SOURCES/mysql_config_multilib.sh @@ -0,0 +1,26 @@ +#! /bin/sh +# +# Wrapper script for mysql_config to support multilib +# +# This command respects setarch + +bits=$(rpm --eval %__isa_bits) + +case $bits in + 32|64) status=known ;; + *) status=unknown ;; +esac + +if [ "$status" = "unknown" ] ; then + echo "$0: error: command 'rpm --eval %__isa_bits' returned unknown value: $bits" + exit 1 +fi + + +if [ -x @bindir@/mysql_config-$bits ] ; then + @bindir@/mysql_config-$bits "$@" +else + echo "$0: error: needed binary: @bindir@/mysql_config-$bits is missing" + exit 1 +fi + diff --git a/SOURCES/rh-skipped-tests-arm.list b/SOURCES/rh-skipped-tests-arm.list new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/SOURCES/rh-skipped-tests-arm.list diff --git a/SOURCES/rh-skipped-tests-base.list b/SOURCES/rh-skipped-tests-base.list new file mode 100644 index 0000000..4ec7273 --- /dev/null +++ b/SOURCES/rh-skipped-tests-base.list @@ -0,0 +1,25 @@ +# The SSL test are failing correctly. For more explanation, see: +# https://jira.mariadb.org/browse/MDEV-8404?focusedCommentId=84275&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel#comment-84275 +main.ssl_7937 : +main.ssl_8k_key : +main.ssl_crl : +main.ssl_system_ca : + +perfschema.cnf_option : +perfschema.nesting : +perfschema.socket_summary_by_instance_func : +perfschema.socket_summary_by_event_name_func : + +# --- + +main.userstat : +main.mysqld--help-aria : + +rpl.rpl_row_img_blobs : +rpl.rpl_row_img_eng_min : +rpl.rpl_row_img_eng_noblob : + +sys_vars.slave_parallel_threads_basic : + +# Since 10.3.26 produces a warning to the test logfile which causes the test to fail +plugins.feedback_plugin_load : diff --git a/SOURCES/rh-skipped-tests-ppc.list b/SOURCES/rh-skipped-tests-ppc.list new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/SOURCES/rh-skipped-tests-ppc.list diff --git a/SOURCES/rh-skipped-tests-s390.list b/SOURCES/rh-skipped-tests-s390.list new file mode 100644 index 0000000..5b1d342 --- /dev/null +++ b/SOURCES/rh-skipped-tests-s390.list @@ -0,0 +1,4 @@ +#Fails from 10.3.17 +main.func_regexp_pcre: +unit.pcre_test: + diff --git a/SOURCES/upstream_5cc2096f93b7f130b36f8bc0fc43440db9a848e4.patch b/SOURCES/upstream_5cc2096f93b7f130b36f8bc0fc43440db9a848e4.patch new file mode 100644 index 0000000..f1c2f19 --- /dev/null +++ b/SOURCES/upstream_5cc2096f93b7f130b36f8bc0fc43440db9a848e4.patch @@ -0,0 +1,1128 @@ +From 5cc2096f93b7f130b36f8bc0fc43440db9a848e4 Mon Sep 17 00:00:00 2001 +From: Pali +Date: Fri, 7 Jun 2019 16:30:27 +0200 +Subject: [PATCH] Switch Perl DBI scripts from DBD::mysql to DBD::MariaDB + driver + +Perl DBD::MariaDB driver is available CPAN and is already used in +production environment. +--- + Docs/INSTALL-BINARY | 2 +- + man/mysql_convert_table_format.1 | 2 +- + man/mysql_setpermission.1 | 2 +- + ...dbd-mysql.inc => have_dbi_dbd-mariadb.inc} | 10 ++-- + mysql-test/include/mysqlhotcopy.inc | 4 +- + ...I_DBD-mysql.pl => checkDBI_DBD-MariaDB.pl} | 26 ++++---- + plugin/handler_socket/client/hspool_test.pl | 4 +- + plugin/handler_socket/client/hstest.pl | 4 +- + .../handler_socket/regtest/common/hstest.pm | 8 +-- + scripts/mysql_convert_table_format.sh | 4 +- + scripts/mysql_setpermission.sh | 2 +- + scripts/mysqlhotcopy.sh | 8 +-- + scripts/mytop.sh | 6 +- + sql-bench/server-cfg.sh | 4 +- + storage/maria/ma_ft_test1.h | 2 +- + tests/big_record.pl | 6 +- + tests/check_async_queries.pl | 2 +- + tests/consistent_snapshot.pl | 2 +- + tests/drop_test.pl | 12 ++-- + tests/fork_big.pl | 28 ++++----- + tests/fork_big2.pl | 32 +++++----- + tests/grant.pl | 4 +- + tests/index_corrupt.pl | 10 ++-- + tests/insert_and_repair.pl | 10 ++-- + tests/mail_to_db.pl | 6 +- + tests/pmail.pl | 2 +- + tests/rename_test.pl | 12 ++-- + tests/test_delayed_insert.pl | 22 +++---- + tests/truncate.pl | 6 +- + 35 files changed, 161 insertions(+), 166 deletions(-) + rename mysql-test/include/{have_dbi_dbd-mysql.inc => have_dbi_dbd-mariadb.inc} (91%) + rename mysql-test/std_data/{checkDBI_DBD-mysql.pl => checkDBI_DBD-MariaDB.pl} (80%) + +diff --git a/Docs/INSTALL-BINARY b/Docs/INSTALL-BINARY +index 2bd6daaea17c..64d5192a49dd 100644 +--- a/Docs/INSTALL-BINARY ++++ b/Docs/INSTALL-BINARY +@@ -154,7 +154,7 @@ shell> chown -R mysql data + script itself and at + https://mariadb.com/kb/en/starting-and-stopping-mariadb-automatically. + 10. You can set up new accounts using the bin/mysql_setpermission +- script if you install the DBI and DBD::mysql Perl modules. See ++ script if you install the DBI and DBD::MariaDB Perl modules. See + Section 4.6.14, "mysql_setpermission --- Interactively Set + Permissions in Grant Tables." For Perl module installation + instructions, see Section 2.15, "Perl Installation Notes." +diff --git a/man/mysql_convert_table_format.1 b/man/mysql_convert_table_format.1 +index 0c35c2954192..faa35afbe560 100644 +--- a/man/mysql_convert_table_format.1 ++++ b/man/mysql_convert_table_format.1 +@@ -26,7 +26,7 @@ by default)\&. + is written in Perl and requires that the + DBI + and +-DBD::mysql ++DBD::MariaDB + Perl modules be installed (see + Section\ \&2.15, \(lqPerl Installation Notes\(rq)\&. + .PP +diff --git a/man/mysql_setpermission.1 b/man/mysql_setpermission.1 +index f20f7ceff358..f2f5e3e039c8 100644 +--- a/man/mysql_setpermission.1 ++++ b/man/mysql_setpermission.1 +@@ -25,7 +25,7 @@ is a Perl script that was originally written and contributed by Luuk de Boer\&. + is written in Perl and requires that the + DBI + and +-DBD::mysql ++DBD::MariaDB + Perl modules be installed\&. + .PP + Invoke +diff --git a/mysql-test/include/have_dbi_dbd-mysql.inc b/mysql-test/include/have_dbi_dbd-mariadb.inc +similarity index 91% +rename from mysql-test/include/have_dbi_dbd-mysql.inc +rename to mysql-test/include/have_dbi_dbd-mariadb.inc +index 7c2113a8109b..1495d2891c8a 100644 +--- a/mysql-test/include/have_dbi_dbd-mysql.inc ++++ b/mysql-test/include/have_dbi_dbd-mariadb.inc +@@ -1,7 +1,7 @@ + # + # Originally created by John Embretsen, 2011-01-26. + # +-# Checks for the existence of Perl modules DBI and DBD::mysql as seen from the ++# Checks for the existence of Perl modules DBI and DBD::MariaDB as seen from the + # perl installation used by "external" executable perl scripts, i.e. scripts + # that are executed as standalone scripts interpreted by the perl installation + # specified by the "shebang" line in the top of these scripts. +@@ -30,7 +30,7 @@ + # We jump through some hoops since there is no direct way to check if an + # external command went OK or not from a mysql-test file: + # +-# - In theory, we could do as simple as "exec perl -MDBI -MDBD::mysql -e 1", ++# - In theory, we could do as simple as "exec perl -MDBI -MDBD::MariaDB -e 1", + # however we cannot check the result (exit code) from within a test script. + # Also, this may not yield the same result as other uses of perl due to the + # shebang issue mentioned above. +@@ -55,8 +55,8 @@ + # Instead, we call a separate helper script which checks for the modules in its + # own environment. We call it without "perl" in front. + +---let $perlChecker= $MYSQLTEST_VARDIR/std_data/checkDBI_DBD-mysql.pl +---let $resultFile= $MYSQL_TMP_DIR/dbidbd-mysql.txt ++--let $perlChecker= $MYSQLTEST_VARDIR/std_data/checkDBI_DBD-MariaDB.pl ++--let $resultFile= $MYSQL_TMP_DIR/dbiDBD-MariaDB.txt + + --exec perl $perlChecker + +@@ -64,7 +64,7 @@ + --source $resultFile + + if (!$dbidbd) { +- --skip Test needs Perl modules DBI and DBD::mysql ++ --skip Test needs Perl modules DBI and DBD::MariaDB + } + + # Clean up +diff --git a/mysql-test/include/mysqlhotcopy.inc b/mysql-test/include/mysqlhotcopy.inc +index 2fc14d599d94..306f0acc2084 100644 +--- a/mysql-test/include/mysqlhotcopy.inc ++++ b/mysql-test/include/mysqlhotcopy.inc +@@ -4,7 +4,7 @@ + + --source include/not_windows.inc + --source include/not_embedded.inc +---source include/have_dbi_dbd-mysql.inc ++--source include/have_dbi_dbd-mariadb.inc + + if (!$MYSQLHOTCOPY) + { +@@ -19,7 +19,7 @@ if (!$MYSQLHOTCOPY) + # executable, i.e. not necessarily using the perl interpreter in PATH, + # because that is how the documentation demonstrates it. + # +-# We include have_dbi_dbd-mysql.inc above so that the test will ++# We include have_dbi_dbd-mariadb.inc above so that the test will + # be skipped if Perl modules required by the mysqlhotcopy tool are not + # found when the script is run this way. + +diff --git a/mysql-test/std_data/checkDBI_DBD-mysql.pl b/mysql-test/std_data/checkDBI_DBD-MariaDB.pl +similarity index 80% +rename from mysql-test/std_data/checkDBI_DBD-mysql.pl +rename to mysql-test/std_data/checkDBI_DBD-MariaDB.pl +index 328a7ad774f3..ed0f5b415d7a 100755 +--- a/mysql-test/std_data/checkDBI_DBD-mysql.pl ++++ b/mysql-test/std_data/checkDBI_DBD-MariaDB.pl +@@ -20,7 +20,7 @@ + ################################################################################ + # + # This perl script checks for availability of the Perl modules DBI and +-# DBD::mysql using the "current" perl interpreter. ++# DBD::MariaDB using the "current" perl interpreter. + # + # Useful for test environment checking before testing executable perl scripts + # in the MySQL Server distribution. +@@ -30,8 +30,8 @@ + # support running perl scripts with such a shebang without specifying the + # perl interpreter on the command line. Such a script is mysqlhotcopy. + # +-# When run as "checkDBI_DBD-mysql.pl" the shebang line will be evaluated +-# and used. When run as "perl checkDBI_DBD-mysql.pl" the shebang line is ++# When run as "checkDBI_DBD-MariaDB.pl" the shebang line will be evaluated ++# and used. When run as "perl checkDBI_DBD-MariaDB.pl" the shebang line is + # not used. + # + # NOTE: This script will create a temporary file in MTR's tmp dir. +@@ -43,13 +43,13 @@ + # + # Example: + # +-# --let $perlChecker= $MYSQLTEST_VARDIR/std_data/checkDBI_DBD-mysql.pl +-# --let $resultFile= $MYSQL_TMP_DIR/dbidbd-mysql.txt ++# --let $perlChecker= $MYSQLTEST_VARDIR/std_data/checkDBI_DBD-MariaDB.pl ++# --let $resultFile= $MYSQL_TMP_DIR/dbiDBD-MariaDB.txt + # --chmod 0755 $perlChecker + # --exec $perlChecker + # --source $resultFile + # if (!$dbidbd) { +-# --skip Test needs Perl modules DBI and DBD::mysql ++# --skip Test needs Perl modules DBI and DBD::MariaDB + # } + # + # The calling script is also responsible for cleaning up after use: +@@ -59,7 +59,7 @@ + # Windows notes: + # - shebangs may work differently - call this script with "perl " in front. + # +-# See mysql-test/include/have_dbi_dbd-mysql.inc for example use of this script. ++# See mysql-test/include/have_dbi_dbd-mariadb.inc for example use of this script. + # This script should be executable for the user running MTR. + # + ################################################################################ +@@ -69,13 +69,13 @@ BEGIN + # We need to catch "Can't locate" as well as "Can't load" errors. + eval{ + $FOUND_DBI=0; +- $FOUND_DBD_MYSQL=0; ++ $FOUND_DBD_MARIADB=0; + + # Check for DBI module: + $FOUND_DBI=1 if require DBI; + +- # Check for DBD::mysql module +- $FOUND_DBD_MYSQL=1 if require DBD::mysql; ++ # Check for DBD::MariaDB module ++ $FOUND_DBD_MARIADB=1 if require DBD::MariaDB; + }; + }; + +@@ -83,11 +83,11 @@ BEGIN + # The file must be created whether we write to it or not, otherwise mysql-test + # will complain if trying to source it. + # An empty file indicates failure to load modules. +-open(FILE, ">", $ENV{'MYSQL_TMP_DIR'}.'/dbidbd-mysql.txt'); ++open(FILE, ">", $ENV{'MYSQL_TMP_DIR'}.'/dbiDBD-MariaDB.txt'); + +-if ($FOUND_DBI && $FOUND_DBD_MYSQL) { ++if ($FOUND_DBI && $FOUND_DBD_MARIADB) { + # write a mysql-test command setting a variable to indicate success +- print(FILE 'let $dbidbd= FOUND_DBI_DBD-MYSQL;'."\n"); ++ print(FILE 'let $dbidbd= FOUND_DBI_DBD-MARIADB;'."\n"); + } + + # close the file. +diff --git a/plugin/handler_socket/client/hspool_test.pl b/plugin/handler_socket/client/hspool_test.pl +index 7fe073301b18..091cb4967cb8 100755 +--- a/plugin/handler_socket/client/hspool_test.pl ++++ b/plugin/handler_socket/client/hspool_test.pl +@@ -31,8 +31,8 @@ + my $mysql_user = 'root'; + my $mysql_password = ''; + +-my $dsn = "DBI:mysql:database=;host=$host;port=$mysqlport" +- . ";mysql_server_prepare=$ssps"; ++my $dsn = "DBI:MariaDB:database=;host=$host;port=$mysqlport" ++ . ";mariadb_server_prepare=$ssps"; + my $dbh = DBI->connect($dsn, $mysql_user, $mysql_password, + { RaiseError => 1 }); + my $hsargs = { 'host' => $host, 'port' => $hsport_rd }; +diff --git a/plugin/handler_socket/client/hstest.pl b/plugin/handler_socket/client/hstest.pl +index 4d177b6cdc87..de39fcb6d6c5 100755 +--- a/plugin/handler_socket/client/hstest.pl ++++ b/plugin/handler_socket/client/hstest.pl +@@ -33,8 +33,8 @@ + my $keytype = get_conf("keytype", "varchar(32)"); + my $file = get_conf("file", undef); + +-my $dsn = "DBI:mysql:database=;host=$host;port=$mysqlport" +- . ";mysql_server_prepare=$ssps"; ++my $dsn = "DBI:MariaDB:database=;host=$host;port=$mysqlport" ++ . ";mariadb_server_prepare=$ssps"; + my $dbh = DBI->connect($dsn, $mysqluser, $mysqlpass, { RaiseError => 1 }); + my $hsargs = { 'host' => $host, 'port' => $hsport }; + my $cli = new Net::HandlerSocket($hsargs); +diff --git a/plugin/handler_socket/regtest/common/hstest.pm b/plugin/handler_socket/regtest/common/hstest.pm +index 348242b027f3..89f273c9786b 100644 +--- a/plugin/handler_socket/regtest/common/hstest.pm ++++ b/plugin/handler_socket/regtest/common/hstest.pm +@@ -29,10 +29,10 @@ sub get_dbi_connection { + = ($conf{dbname}, $conf{host}, $conf{myport}, $conf{ssps}, + $conf{user}, $conf{pass}); + my $mycnf = "binary_my.cnf"; +- my $dsn = "DBI:mysql:database=;host=$host;port=$myport" +- . ";mysql_server_prepare=$ssps" +- . ";mysql_read_default_group=perl" +- . ";mysql_read_default_file=../common/$mycnf"; ++ my $dsn = "DBI:MariaDB:database=;host=$host;port=$myport" ++ . ";mariadb_server_prepare=$ssps" ++ . ";mariadb_read_default_group=perl" ++ . ";mariadb_read_default_file=../common/$mycnf"; + my $dbh = DBI->connect($dsn, $user, $pass, { RaiseError => 1 }); + return $dbh; + } +diff --git a/scripts/mysql_convert_table_format.sh b/scripts/mysql_convert_table_format.sh +index 2001efae3929..6b4d758a5131 100644 +--- a/scripts/mysql_convert_table_format.sh ++++ b/scripts/mysql_convert_table_format.sh +@@ -57,10 +57,10 @@ if ($opt_port) + } + if (length($opt_socket)) + { +- $connect_opt.=";mysql_socket=$opt_socket"; ++ $connect_opt.=";mariadb_socket=$opt_socket"; + } + +-$dbh = DBI->connect("DBI:mysql:$opt_database:${opt_host}$connect_opt", ++$dbh = DBI->connect("DBI:MariaDB:$opt_database:${opt_host}$connect_opt", + $opt_user, + $opt_password, + { PrintError => 0}) +diff --git a/scripts/mysql_setpermission.sh b/scripts/mysql_setpermission.sh +index 71462d286229..66decbd69af7 100644 +--- a/scripts/mysql_setpermission.sh ++++ b/scripts/mysql_setpermission.sh +@@ -86,7 +86,7 @@ if ($opt_password eq '') + + + # make the connection to MariaDB +-$dbh= DBI->connect("DBI:mysql:mysql:host=$sqlhost:port=$opt_port:mysql_socket=$opt_socket",$opt_user,$opt_password, {PrintError => 0}) || ++$dbh= DBI->connect("DBI:MariaDB:mysql:host=$sqlhost:port=$opt_port:mariadb_socket=$opt_socket",$opt_user,$opt_password, {PrintError => 0}) || + die("Can't make a connection to the mysql server.\n The error: $DBI::errstr"); + + # the start of the program +diff --git a/scripts/mysqlhotcopy.sh b/scripts/mysqlhotcopy.sh +index c56cdea470c0..94e577a94a7f 100644 +--- a/scripts/mysqlhotcopy.sh ++++ b/scripts/mysqlhotcopy.sh +@@ -192,12 +192,12 @@ $opt{allowold} = 1 if $opt{keepold}; + my $dsn; + $dsn = ";host=" . (defined($opt{host}) ? $opt{host} : "localhost"); + $dsn .= ";port=$opt{port}" if $opt{port}; +-$dsn .= ";mysql_socket=$opt{socket}" if $opt{socket}; ++$dsn .= ";mariadb_socket=$opt{socket}" if $opt{socket}; + +-# use mysql_read_default_group=mysqlhotcopy so that [client] and ++# use mariadb_read_default_group=mysqlhotcopy so that [client] and + # [mysqlhotcopy] groups will be read from standard options files. + +-my $dbh = DBI->connect("dbi:mysql:$dsn;mysql_read_default_group=mysqlhotcopy", ++my $dbh = DBI->connect("DBI:MariaDB:$dsn;mariadb_read_default_group=mysqlhotcopy", + $opt{user}, $opt{password}, + { + RaiseError => 1, +@@ -796,7 +796,7 @@ sub record_log_pos { + + my $row_hash = get_row_hash( $dbh, "show slave status" ); + my ($master_host, $log_file, $log_pos ); +- if ( $dbh->{mysql_serverinfo} =~ /^3\.23/ ) { ++ if ( $dbh->{mariadb_serverinfo} =~ /^3\.23/ ) { + ($master_host, $log_file, $log_pos ) + = @{$row_hash}{ qw / Master_Host Log_File Pos / }; + } else { +diff --git a/scripts/mytop.sh b/scripts/mytop.sh +index 3ef0a59f27f7..1c4d7a502f51 100644 +--- a/scripts/mytop.sh ++++ b/scripts/mytop.sh +@@ -230,11 +230,11 @@ my $dsn; + + ## Socket takes precedence. + +-$dsn ="DBI:mysql:database=$config{db};mysql_read_default_group=mytop;"; ++$dsn ="DBI:MariaDB:database=$config{db};mariadb_read_default_group=mytop;"; + + if ($config{socket} and -S $config{socket}) + { +- $dsn .= "mysql_socket=$config{socket}"; ++ $dsn .= "mariadb_socket=$config{socket}"; + } + else + { +@@ -1877,7 +1877,7 @@ following: + + * Perl 5.005 or newer + * Getopt::Long +- * DBI and DBD::mysql ++ * DBI and DBD::MariaDB + * Term::ReadKey from CPAN + + Most systems are likely to have all of those installed--except for +diff --git a/sql-bench/server-cfg.sh b/sql-bench/server-cfg.sh +index 3991d16c6b18..6ef39c4d91f8 100644 +--- a/sql-bench/server-cfg.sh ++++ b/sql-bench/server-cfg.sh +@@ -116,8 +116,8 @@ sub new + bless $self; + + $self->{'cmp_name'} = "mysql"; +- $self->{'data_source'} = "DBI:mysql:database=$database;host=$host"; +- $self->{'data_source'} .= ";mysql_socket=$socket" if($socket); ++ $self->{'data_source'} = "DBI:MariaDB:database=$database;host=$host"; ++ $self->{'data_source'} .= ";mariadb_socket=$socket" if($socket); + $self->{'data_source'} .= ";$connect_options" if($connect_options); + $self->{'limits'} = \%limits; + $self->{'blob'} = "blob"; +diff --git a/storage/maria/ma_ft_test1.h b/storage/maria/ma_ft_test1.h +index 0f4997a71424..df86eeceb66c 100644 +--- a/storage/maria/ma_ft_test1.h ++++ b/storage/maria/ma_ft_test1.h +@@ -311,7 +311,7 @@ struct { const char *f0, *f2; } data[NDATAS] = { + {"18.4.49", "Problems linking with the C API"}, + {"18.4.50", "How to make a thread-safe client"}, + {"18.5", "MySQL Perl API's"}, +- {"18.5.1", "DBI with DBD::mysql"}, ++ {"18.5.1", "DBI with DBD::MariaDB"}, + {"18.5.1.1", "The DBI interface"}, + {"18.5.1.2", "More DBI/DBD information"}, + {"18.6", "MySQL Java connectivity (JDBC)"}, +diff --git a/tests/big_record.pl b/tests/big_record.pl +index cb1f89984682..b2aeee276586 100755 +--- a/tests/big_record.pl ++++ b/tests/big_record.pl +@@ -37,9 +37,9 @@ + print "Connection to database $test_db\n"; + + $extra_options=""; +-$extra_options.=":mysql_compression=1" if ($opt_compress); ++$extra_options.=":mariadb_compression=1" if ($opt_compress); + +-$dbh = DBI->connect("DBI:mysql:$opt_db:$host$extra_options",$opt_user,$opt_password) || die "Can't connect: $DBI::errstr\n"; ++$dbh = DBI->connect("DBI:MariaDB:$opt_db:$host$extra_options",$opt_user,$opt_password) || die "Can't connect: $DBI::errstr\n"; + + $dbh->do("drop table if exists $opt_table"); + +@@ -65,7 +65,7 @@ + + print "\nReading records\n"; + +-$sth=$dbh->prepare("select * from $opt_table", { "mysql_use_result" => 1}) or die $dbh->errstr; ++$sth=$dbh->prepare("select * from $opt_table", { "mariadb_use_result" => 1}) or die $dbh->errstr; + + $sth->execute() or die $sth->errstr; + +diff --git a/tests/check_async_queries.pl b/tests/check_async_queries.pl +index b599bc334d3c..0039dd90eb9c 100644 +--- a/tests/check_async_queries.pl ++++ b/tests/check_async_queries.pl +@@ -13,7 +13,7 @@ + die "Usage: $0 \n" + unless @ARGV == 4; + +-my $dbh= DBI->connect("DBI:mysql:database=$ARGV[3];host=$ARGV[0]", ++my $dbh= DBI->connect("DBI:MariaDB:database=$ARGV[3];host=$ARGV[0]", + $ARGV[1], $ARGV[2], + { RaiseError => 1, PrintError => 0 }); + +diff --git a/tests/consistent_snapshot.pl b/tests/consistent_snapshot.pl +index 9e53eaea6a1a..5c006b0092d5 100755 +--- a/tests/consistent_snapshot.pl ++++ b/tests/consistent_snapshot.pl +@@ -17,7 +17,7 @@ + my $stop_time= time() + $DURATION; + + sub my_connect { +- my $dbh= DBI->connect("dbi:mysql:mysql_socket=/tmp/mysql.sock;database=test", ++ my $dbh= DBI->connect("DBI:MariaDB:mariadb_socket=/tmp/mysql.sock;database=test", + "root", undef, { RaiseError=>1, PrintError=>0, AutoCommit=>0}); + $dbh->do("SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ"); + $dbh->do("SET SESSION autocommit = 0"); +diff --git a/tests/drop_test.pl b/tests/drop_test.pl +index 329f65eb65da..15a75f4908c6 100755 +--- a/tests/drop_test.pl ++++ b/tests/drop_test.pl +@@ -50,7 +50,7 @@ package main; + $start_time=new Benchmark; + if (!$opt_skip_create) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table if exists $firsttable, ${firsttable}_1, ${firsttable}_2"); +@@ -81,7 +81,7 @@ package main; + + if (!$opt_skip_delete && !$errors) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table $firsttable"); +@@ -103,7 +103,7 @@ sub test_insert + { + my ($dbh,$i); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + for ($i=0 ; $i < $opt_loop_count; $i++) +@@ -124,7 +124,7 @@ sub test_drop + my ($id) = @_; + my ($dbh,$i,$sth,$error_counter,$sleep_time); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $error_counter=0; +@@ -169,7 +169,7 @@ sub test_select + { + my ($dbh,$i,$sth,@row,$error_counter,$sleep_time); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -206,7 +206,7 @@ sub test_flush + { + my ($dbh,$i,$sth,@row,$error_counter,$sleep_time); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +diff --git a/tests/fork_big.pl b/tests/fork_big.pl +index 623377ab5cdd..2f803b7fdd3c 100755 +--- a/tests/fork_big.pl ++++ b/tests/fork_big.pl +@@ -65,7 +65,7 @@ package main; + #### + + $start_time=new Benchmark; +-$dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++$dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + if (!$opt_skip_create) +@@ -155,7 +155,7 @@ package main; + if (!$opt_skip_delete && !$errors) + { + my $table_def; +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -189,7 +189,7 @@ sub test_insert + $from_table=0; $to_table=$numtables-1; + } + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -218,7 +218,7 @@ sub test_select + { + my ($dbh, $i, $j, $count, $loop, $count_query, $row_counts); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -255,7 +255,7 @@ sub test_select_count + { + my ($dbh, $i, $j, $count, $loop); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -285,7 +285,7 @@ sub test_join + { + my ($dbh, $i, $j, $count, $loop, $count_query, $row_counts); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -326,7 +326,7 @@ sub test_delete + + $table_count=2; + $count=0; +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -360,7 +360,7 @@ sub test_delete + sub test_update + { + my ($dbh, $i, $j, $row_counts, $count_query, $count, $loop); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -403,7 +403,7 @@ sub test_update + sub test_check + { + my ($dbh, $sth, $row, $i, $j, $type, $table); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -440,7 +440,7 @@ sub test_check + sub test_repair + { + my ($dbh, $sth, $row, $i, $type, $table); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -474,7 +474,7 @@ sub test_flush + { + my ($dbh,$count,$tables); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -502,7 +502,7 @@ sub test_database + { + my ($database) = @_; + my ($dbh, $sth, $row, $i, $type, $tables); +- $dbh = DBI->connect("DBI:mysql:$database:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$database:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -535,7 +535,7 @@ sub test_database + sub test_alter + { + my ($dbh, $sth, $row, $i, $type, $table); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -559,7 +559,7 @@ sub test_alter + sub signal_abort + { + my ($dbh); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +diff --git a/tests/fork_big2.pl b/tests/fork_big2.pl +index c844d2908345..a2b465734dc5 100644 +--- a/tests/fork_big2.pl ++++ b/tests/fork_big2.pl +@@ -81,7 +81,7 @@ package main; + } + + $start_time=new Benchmark; +-$dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++$dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + if (!$opt_skip_create) +@@ -212,7 +212,7 @@ package main; + if (!$opt_skip_drop && !$errors) + { + my $table_def; +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -257,7 +257,7 @@ sub test_insert + $from_table=0; $to_table=$numtables-1; + } + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -286,7 +286,7 @@ sub test_select + { + my ($dbh, $i, $j, $count, $loop); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -323,7 +323,7 @@ sub test_select_count + { + my ($dbh, $i, $j, $count, $loop); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -353,7 +353,7 @@ sub test_join + { + my ($dbh, $i, $j, $count, $loop); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -391,7 +391,7 @@ sub test_join_count + { + my ($dbh, $i, $j, $count, $loop); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -446,7 +446,7 @@ sub test_delete + + $table_count=2; + $count=0; +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -480,7 +480,7 @@ sub test_delete + sub test_update + { + my ($dbh, $i, $j, $row_counts, $count_query, $count, $loop); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -523,7 +523,7 @@ sub test_update + sub test_check + { + my ($dbh, $row, $i, $j, $type, $table); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -560,7 +560,7 @@ sub test_check + sub test_repair + { + my ($dbh, $row, $i, $type, $table); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -594,7 +594,7 @@ sub test_flush + { + my ($dbh,$count,$tables); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -621,7 +621,7 @@ sub test_resize + { + my ($dbh, $key_buffer_size); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -648,7 +648,7 @@ sub test_database + { + my ($database) = @_; + my ($dbh, $row, $i, $type, $tables); +- $dbh = DBI->connect("DBI:mysql:$database:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$database:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -681,7 +681,7 @@ sub test_database + sub test_alter + { + my ($dbh, $row, $i, $type, $table); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -705,7 +705,7 @@ sub test_alter + sub signal_abort + { + my ($dbh); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +diff --git a/tests/grant.pl b/tests/grant.pl +index cd6516433166..f8cdc1af4d55 100755 +--- a/tests/grant.pl ++++ b/tests/grant.pl +@@ -60,7 +60,7 @@ + # clear grant tables + # + +-$dbh = DBI->connect("DBI:mysql:mysql:$opt_host", ++$dbh = DBI->connect("DBI:MariaDB:mysql:$opt_host", + $opt_root_user,$opt_password, + { PrintError => 0}) || die "Can't connect to mysql server with user '$opt_root_user': $DBI::errstr\n"; + +@@ -653,7 +653,7 @@ sub user_connect + print "Connecting $opt_user\n" if ($opt_verbose); + $user_dbh->disconnect if (defined($user_dbh)); + +- $user_dbh=DBI->connect("DBI:mysql:$opt_database:$opt_host",$opt_user, ++ $user_dbh=DBI->connect("DBI:MariaDB:$opt_database:$opt_host",$opt_user, + $password, { PrintError => 0}); + if (!$user_dbh) + { +diff --git a/tests/index_corrupt.pl b/tests/index_corrupt.pl +index 6b04ce8a59c5..6f31b85bd614 100755 +--- a/tests/index_corrupt.pl ++++ b/tests/index_corrupt.pl +@@ -51,7 +51,7 @@ package main; + $start_time=new Benchmark; + if (!$opt_skip_create) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table if exists $firsttable, $secondtable"); +@@ -111,7 +111,7 @@ package main; + + if (!$opt_skip_delete && !$errors) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table $firsttable, $secondtable"); +@@ -134,7 +134,7 @@ sub insert_in_bench + { + my ($dbh,$rows,$found,$i); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + for ($rows= 1; $rows <= $opt_loop_count ; $rows++) +@@ -179,7 +179,7 @@ sub select_from_bench + { + my ($dbh,$rows,$cursor); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + for ($rows= 1; $rows < $opt_loop_count ; $rows++) +@@ -206,7 +206,7 @@ sub delete_from_bench + { + my ($dbh,$row, $t_value, $t2_value, $statement, $cursor); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +diff --git a/tests/insert_and_repair.pl b/tests/insert_and_repair.pl +index 18091c92718d..dfa490456cb8 100755 +--- a/tests/insert_and_repair.pl ++++ b/tests/insert_and_repair.pl +@@ -49,7 +49,7 @@ package main; + $start_time=new Benchmark; + if (!$opt_skip_create) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table if exists $firsttable, $secondtable"); +@@ -79,7 +79,7 @@ package main; + + if (!$opt_skip_delete && !$errors) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table $firsttable,$secondtable"); +@@ -100,7 +100,7 @@ sub insert_in_bench1 + { + my ($dbh,$rows,$found,$i); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $rows=$found=0; +@@ -123,7 +123,7 @@ sub insert_in_bench2 + { + my ($dbh,$rows,$found,$i); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $rows=$found=0; +@@ -149,7 +149,7 @@ sub repair_and_check + $table); + $found1=$found2=0; $last_found1=$last_found2= -1; + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +diff --git a/tests/mail_to_db.pl b/tests/mail_to_db.pl +index e50415d96f31..94f3955b2c32 100755 +--- a/tests/mail_to_db.pl ++++ b/tests/mail_to_db.pl +@@ -110,12 +110,12 @@ sub main + die "FATAL: Can't find inbox file: $ARGV[$i]\n" if (! -f $ARGV[$i]); + } + +- $connect_arg = "DBI:mysql:"; ++ $connect_arg = "DBI:MariaDB:"; + push @args, "database=$opt_db" if defined($opt_db); + push @args, "host=$opt_host" if defined($opt_host); + push @args, "port=$opt_port" if defined($opt_port); +- push @args, "mysql_socket=$opt_socket" if defined($opt_socket); +- push @args, "mysql_read_default_group=mail_to_db"; ++ push @args, "mariadb_socket=$opt_socket" if defined($opt_socket); ++ push @args, "mariadb_read_default_group=mail_to_db"; + $connect_arg .= join ';', @args; + $dbh = DBI->connect("$connect_arg", $opt_user, $opt_password, + { PrintError => 0}) +diff --git a/tests/pmail.pl b/tests/pmail.pl +index 359256c25b34..de469923c7d3 100755 +--- a/tests/pmail.pl ++++ b/tests/pmail.pl +@@ -60,7 +60,7 @@ + #### Connect and parsing the query to MySQL + #### + +-$dbh= DBI->connect("DBI:mysql:$opt_db:$opt_host:port=$opt_port:mysql_socket=$opt_socket", $opt_user,$opt_password, { PrintError => 0}) ++$dbh= DBI->connect("DBI:MariaDB:$opt_db:$opt_host:port=$opt_port:mariadb_socket=$opt_socket", $opt_user,$opt_password, { PrintError => 0}) + || die $DBI::errstr; + + main(); +diff --git a/tests/rename_test.pl b/tests/rename_test.pl +index d7097df1e4e3..ff1b73434e54 100755 +--- a/tests/rename_test.pl ++++ b/tests/rename_test.pl +@@ -48,7 +48,7 @@ package main; + $start_time=new Benchmark; + if (!$opt_skip_create) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table if exists $firsttable, ${firsttable}_1, ${firsttable}_2"); +@@ -81,7 +81,7 @@ package main; + + if (!$opt_skip_delete && !$errors) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $dbh->do("drop table $firsttable"); +@@ -103,7 +103,7 @@ sub test_insert + { + my ($dbh,$i,$error); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + for ($i=0 ; $i < $opt_loop_count; $i++) +@@ -128,7 +128,7 @@ sub test_rename + my ($id) = @_; + my ($dbh,$i,$error_counter,$sleep_time); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + $error_counter=0; +@@ -158,7 +158,7 @@ sub test_select + { + my ($dbh,$i,$sth,@row,$sleep_time); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -192,7 +192,7 @@ sub test_flush + { + my ($dbh,$i,$sth,@row,$error_counter,$sleep_time); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +diff --git a/tests/test_delayed_insert.pl b/tests/test_delayed_insert.pl +index cb5b86a228d1..2ebb42e08d1c 100755 +--- a/tests/test_delayed_insert.pl ++++ b/tests/test_delayed_insert.pl +@@ -50,7 +50,7 @@ package main; + $start_time=new Benchmark; + if (!$opt_skip_create) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $Mysql::QUIET = 1; + $dbh->do("drop table if exists $firsttable,$secondtable"); + $Mysql::QUIET = 0; +@@ -87,7 +87,7 @@ package main; + + if (!$opt_skip_delete && !$errors) + { +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $dbh->do("drop table $firsttable"); + $dbh->do("drop table $secondtable"); + } +@@ -107,7 +107,7 @@ sub test_1 + { + my ($dbh,$tmpvar,$rows,$found,$i); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $tmpvar=1; + $rows=$found=0; + for ($i=0 ; $i < $opt_loop_count; $i++) +@@ -131,7 +131,7 @@ sub test_delayed_1 + { + my ($dbh,$tmpvar,$rows,$found,$i,$id); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $tmpvar=1; + $rows=$found=0; + for ($i=0 ; $i < $opt_loop_count; $i++) +@@ -162,7 +162,7 @@ sub test_delayed_2 + { + my ($dbh,$tmpvar,$rows,$found,$i,$id); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $tmpvar=1; + $rows=$found=0; + for ($i=0 ; $i < $opt_loop_count; $i++) +@@ -196,7 +196,7 @@ sub test_2 + { + my ($dbh,$id,$tmpvar,$rows,$found,$i,$max_id,$tmp,$sth,$count); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $tmpvar=111111; + $rows=$found=$max_id=$id=0; + for ($i=0 ; $i < $opt_loop_count ; $i++) +@@ -245,7 +245,7 @@ sub test_2 + sub test_3 + { + my ($dbh,$id,$tmpvar,$rows,$i,$count); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $tmpvar=222222; + $rows=0; + for ($i=0 ; $i < $opt_loop_count ; $i++) +@@ -269,7 +269,7 @@ sub test_3 + sub test_4 + { + my ($dbh,$id,$tmpvar,$rows,$i,$count); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $tmpvar=333333; + $rows=0; + for ($i=0 ; $i < $opt_loop_count; $i++) +@@ -288,7 +288,7 @@ sub test_4 + sub test_5 + { + my ($dbh,$id,$tmpvar,$rows,$i,$max_id,$count,$sth); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $tmpvar=444444; + $rows=$max_id=0; + for ($i=0 ; $i < $opt_loop_count ; $i++) +@@ -328,7 +328,7 @@ sub test_5 + sub test_del + { + my ($dbh,$min_id,$i,$sth,$rows); +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host") || die $DBI::errstr; ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host") || die $DBI::errstr; + $rows=0; + for ($i=0 ; $i < $opt_loop_count/3; $i++) + { +@@ -357,7 +357,7 @@ sub test_flush + my ($dbh,$sth,$found1,$last_found1,$i,@row); + $found1=0; $last_found1=-1; + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +diff --git a/tests/truncate.pl b/tests/truncate.pl +index 98791a15b2c6..85a7888bc4af 100755 +--- a/tests/truncate.pl ++++ b/tests/truncate.pl +@@ -47,7 +47,7 @@ package main; + #### + + $start_time=new Benchmark; +-$dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++$dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + if (!$opt_skip_create) +@@ -100,7 +100,7 @@ package main; + if (!$opt_skip_delete && !$errors) + { + my $table_def; +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + +@@ -127,7 +127,7 @@ sub test_truncate + { + my ($dbh,$i,$j,$count,$table_def,$table); + +- $dbh = DBI->connect("DBI:mysql:$opt_db:$opt_host", ++ $dbh = DBI->connect("DBI:MariaDB:$opt_db:$opt_host", + $opt_user, $opt_password, + { PrintError => 0}) || die $DBI::errstr; + diff --git a/SOURCES/wsrep_sst_rsync_tunnel b/SOURCES/wsrep_sst_rsync_tunnel new file mode 100644 index 0000000..562d191 --- /dev/null +++ b/SOURCES/wsrep_sst_rsync_tunnel @@ -0,0 +1,482 @@ +#!/bin/bash -ue + +# Copyright (C) 2010-2014 Codership Oy +# Copyright (C) 2017 Damien Ciabrini +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; see the file COPYING. If not, write to the +# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston +# MA 02110-1301 USA. + +# This is a reference script for rsync-based state snapshot tansfer +# over an encrypted communication channel, managed by socat + +RSYNC_PID= # rsync pid file +RSYNC_CONF= # rsync configuration file +RSYNC_REAL_PID= # rsync process id + +SOCAT_PID= # socat pid file +SOCAT_REAL_PID= # socat process id + +SOCAT_OPTS= # openssl connection args + +MODULE="rsync_tunnel_sst" + +OS=$(uname) +[ "$OS" == "Darwin" ] && export -n LD_LIBRARY_PATH + +# Setting the path for lsof on CentOS +export PATH="/usr/sbin:/sbin:$PATH" + +. $(dirname $0)/wsrep_sst_common + +wsrep_check_programs rsync socat + +cleanup_pid() +{ + local real_pid=$1 + [ "0" != "$real_pid" ] && \ + kill $real_pid && \ + sleep 0.5 && \ + kill -9 $real_pid >/dev/null 2>&1 || \ + : +} + +cleanup_tunnel() +{ + wsrep_log_info "cleanup socat PID: $SOCAT_REAL_PID" + [ -n "$SOCAT_REAL_PID" ] && cleanup_pid $SOCAT_REAL_PID + rm -rf "$SOCAT_PID" +} + +cleanup_joiner() +{ + wsrep_log_info "Joiner cleanup. rsync PID: $RSYNC_REAL_PID" + [ -n "$RSYNC_REAL_PID" ] && cleanup_pid $RSYNC_REAL_PID + rm -rf "$RSYNC_CONF" + rm -rf "$MAGIC_FILE" + rm -rf "$RSYNC_PID" + + cleanup_tunnel + + wsrep_log_info "Joiner cleanup done." + if [ "${WSREP_SST_OPT_ROLE}" = "joiner" ];then + wsrep_cleanup_progress_file + fi +} + +# Check whether process is still running. +check_pid() +{ + local pid_file=$1 + [ -r "$pid_file" ] && ps -p $(cat $pid_file) >/dev/null 2>&1 +} + +check_pid_and_port() +{ + local pid_file=$1 + local service_pid=$2 + local service_port=$3 + local service_host=$4 + local service_name=$5 + + if ! which lsof > /dev/null; then + wsrep_log_error "lsof tool not found in PATH! Make sure you have it installed." + exit 2 # ENOENT + fi + + local port_info=$(lsof -i "@"$service_host:$service_port -Pn 2>/dev/null | \ + grep "(LISTEN)") + local is_service=$(echo $port_info | \ + grep -w '^'"$service_name"'[[:space:]]\+'"$service_pid" 2>/dev/null) + + if [ -n "$port_info" -a -z "$is_service" ]; then + wsrep_log_error "$service_name daemon port '$service_port' has been taken" + exit 16 # EBUSY + fi + + if ! check_pid $pid_file; then + wsrep_log_error "$service_name process terminated unexpectedly" + exit 10 # ECHILD + fi + + [ -n "$port_info" ] && [ -n "$is_service" ] && \ + [ $(cat $pid_file) -eq $service_pid ] +} + +config_from_cnf() +{ + local group=$1 + local key=$2 + echo $($MY_PRINT_DEFAULTS $group | grep -- "--$key=" | cut -d= -f2- | tail -1) +} + +setup_tunnel_args() +{ + tca=$(config_from_cnf sst tca) + tkey=$(config_from_cnf sst tkey) + tcert=$(config_from_cnf sst tcert) + sockopt=$(config_from_cnf sst sockopt) + + if [ -z "$tcert" ]; then + wsrep_log_error "Encryption certificate not found in my.cnf" + exit 3 + else + SOCAT_OPTS="cert=$tcert" + fi + [ -n "$tkey" ] && SOCAT_OPTS="$SOCAT_OPTS,key=$tkey" + [ -n "$tca" ] && SOCAT_OPTS="$SOCAT_OPTS,cafile=$tca" + wsrep_log_info "Encryption setting to be used for socat tunnel: $SOCAT_OPTS" + + [ -n "$sockopt" ] && SOCAT_OPTS="$SOCAT_OPTS,$sockopt" +} + +MAGIC_FILE="$WSREP_SST_OPT_DATA/rsync_tunnel_sst_complete" +rm -rf "$MAGIC_FILE" + +BINLOG_TAR_FILE="$WSREP_SST_OPT_DATA/wsrep_sst_binlog.tar" +BINLOG_N_FILES=1 +rm -f "$BINLOG_TAR_FILE" || : + +if ! [ -z $WSREP_SST_OPT_BINLOG ] +then + BINLOG_DIRNAME=$(dirname $WSREP_SST_OPT_BINLOG) + BINLOG_FILENAME=$(basename $WSREP_SST_OPT_BINLOG) +fi + +WSREP_LOG_DIR=${WSREP_LOG_DIR:-""} +# if WSREP_LOG_DIR env. variable is not set, try to get it from my.cnf +if [ -z "$WSREP_LOG_DIR" ]; then + WSREP_LOG_DIR=$($MY_PRINT_DEFAULTS --mysqld \ + | grep -- '--innodb[-_]log[-_]group[-_]home[-_]dir=' \ + | cut -b 29- ) +fi + +if [ -n "$WSREP_LOG_DIR" ]; then + # handle both relative and absolute paths + WSREP_LOG_DIR=$(cd $WSREP_SST_OPT_DATA; mkdir -p "$WSREP_LOG_DIR"; cd $WSREP_LOG_DIR; pwd -P) +else + # default to datadir + WSREP_LOG_DIR=$(cd $WSREP_SST_OPT_DATA; pwd -P) +fi + +# Old filter - include everything except selected +# FILTER=(--exclude '*.err' --exclude '*.pid' --exclude '*.sock' \ +# --exclude '*.conf' --exclude core --exclude 'galera.*' \ +# --exclude grastate.txt --exclude '*.pem' \ +# --exclude '*.[0-9][0-9][0-9][0-9][0-9][0-9]' --exclude '*.index') + +# New filter - exclude everything except dirs (schemas) and innodb files +FILTER=(-f '- /lost+found' -f '- /.fseventsd' -f '- /.Trashes' + -f '+ /wsrep_sst_binlog.tar' -f '+ /ib_lru_dump' -f '+ /ibdata*' -f '+ /*/' -f '- /*') + +SOCAT_PID="$WSREP_SST_OPT_DATA/$MODULE-socat.pid" + +if check_pid $SOCAT_PID +then + wsrep_log_error "socat tunnel already running." + exit 114 # EALREADY +fi +rm -rf "$SOCAT_PID" + +setup_tunnel_args + +if [ "$WSREP_SST_OPT_ROLE" = "donor" ] +then + + SOCAT_JOINER_ADDR=$(echo $WSREP_SST_OPT_ADDR | awk -F'/' '{print $1}') + # map to name in case we received an IP + SOCAT_JOINER_HOST=$(getent hosts $SOCAT_JOINER_ADDR | awk '{ print $2 }') + if [ -z "$SOCAT_JOINER_HOST" ]; then + SOCAT_JOINER_HOST=$SOCAT_JOINER_ADDR + fi + SOCAT_PORT=$(echo $SOCAT_JOINER_ADDR | awk -F ':' '{ print $2 }') + if [ -z "$SOCAT_PORT" ] + then + SOCAT_PORT=4444 + fi + TARGET_ADDR=localhost:$SOCAT_PORT/$MODULE + + trap cleanup_tunnel EXIT + + # Socat forwards rsync connections to the joiner + SOCAT_SRC=tcp-listen:$SOCAT_PORT,bind=localhost,reuseaddr,fork + SOCAT_DST=openssl:$SOCAT_JOINER_HOST,$SOCAT_OPTS + wsrep_log_info "Setting up tunnel for donor: socat $SOCAT_SRC $SOCAT_DST" + socat $SOCAT_SRC $SOCAT_DST & + SOCAT_REAL_PID=$! + # This is ok because a local galera node doesn't run SST concurrently + echo $SOCAT_REAL_PID >"$SOCAT_PID" + until check_pid_and_port $SOCAT_PID $SOCAT_REAL_PID $SOCAT_PORT localhost "socat" + do + sleep 0.2 + done + + if [ $WSREP_SST_OPT_BYPASS -eq 0 ] + then + + FLUSHED="$WSREP_SST_OPT_DATA/tables_flushed" + ERROR="$WSREP_SST_OPT_DATA/sst_error" + + rm -rf "$FLUSHED" + rm -rf "$ERROR" + + # Use deltaxfer only for WAN + inv=$(basename $0) + [ "$inv" = "wsrep_sst_rsync_wan" ] && WHOLE_FILE_OPT="" \ + || WHOLE_FILE_OPT="--whole-file" + + echo "flush tables" + + # Wait for : + # (a) Tables to be flushed, AND + # (b) Cluster state ID & wsrep_gtid_domain_id to be written to the file, OR + # (c) ERROR file, in case flush tables operation failed. + + while [ ! -r "$FLUSHED" ] && ! grep -q ':' "$FLUSHED" >/dev/null 2>&1 + do + # Check whether ERROR file exists. + if [ -f "$ERROR" ] + then + # Flush tables operation failed. + rm -rf "$ERROR" + exit 255 + fi + + sleep 0.2 + done + + STATE="$(cat $FLUSHED)" + rm -rf "$FLUSHED" + + sync + + if ! [ -z $WSREP_SST_OPT_BINLOG ] + then + # Prepare binlog files + pushd $BINLOG_DIRNAME &> /dev/null + binlog_files_full=$(tail -n $BINLOG_N_FILES ${BINLOG_FILENAME}.index) + binlog_files="" + for ii in $binlog_files_full + do + binlog_files="$binlog_files $(basename $ii)" + done + if ! [ -z "$binlog_files" ] + then + wsrep_log_info "Preparing binlog files for transfer:" + tar -cvf $BINLOG_TAR_FILE $binlog_files >&2 + fi + popd &> /dev/null + fi + + # first, the normal directories, so that we can detect incompatible protocol + RC=0 + rsync --owner --group --perms --links --specials \ + --ignore-times --inplace --dirs --delete --quiet \ + $WHOLE_FILE_OPT "${FILTER[@]}" "$WSREP_SST_OPT_DATA/" \ + rsync://$TARGET_ADDR >&2 || RC=$? + + if [ "$RC" -ne 0 ]; then + wsrep_log_error "rsync returned code $RC:" + + case $RC in + 12) RC=71 # EPROTO + wsrep_log_error \ + "rsync server on the other end has incompatible protocol. " \ + "Make sure you have the same version of rsync on all nodes." + ;; + 22) RC=12 # ENOMEM + ;; + *) RC=255 # unknown error + ;; + esac + exit $RC + fi + + # second, we transfer InnoDB log files + rsync --owner --group --perms --links --specials \ + --ignore-times --inplace --dirs --delete --quiet \ + $WHOLE_FILE_OPT -f '+ /ib_logfile[0-9]*' -f '- **' "$WSREP_LOG_DIR/" \ + rsync://$TARGET_ADDR-log_dir >&2 || RC=$? + + if [ $RC -ne 0 ]; then + wsrep_log_error "rsync innodb_log_group_home_dir returned code $RC:" + exit 255 # unknown error + fi + + # then, we parallelize the transfer of database directories, use . so that pathconcatenation works + pushd "$WSREP_SST_OPT_DATA" >/dev/null + + count=1 + [ "$OS" == "Linux" ] && count=$(grep -c processor /proc/cpuinfo) + [ "$OS" == "Darwin" -o "$OS" == "FreeBSD" ] && count=$(sysctl -n hw.ncpu) + + find . -maxdepth 1 -mindepth 1 -type d -not -name "lost+found" -print0 | \ + xargs -I{} -0 -P $count \ + rsync --owner --group --perms --links --specials \ + --ignore-times --inplace --recursive --delete --quiet \ + $WHOLE_FILE_OPT --exclude '*/ib_logfile*' "$WSREP_SST_OPT_DATA"/{}/ \ + rsync://$TARGET_ADDR/{} >&2 || RC=$? + + popd >/dev/null + + if [ $RC -ne 0 ]; then + wsrep_log_error "find/rsync returned code $RC:" + exit 255 # unknown error + fi + + else # BYPASS + wsrep_log_info "Bypassing state dump." + + # Store donor's wsrep GTID (state ID) and wsrep_gtid_domain_id + # (separated by a space). + STATE="$WSREP_SST_OPT_GTID $WSREP_SST_OPT_GTID_DOMAIN_ID" + fi + + echo "continue" # now server can resume updating data + + echo "$STATE" > "$MAGIC_FILE" + rsync --archive --quiet --checksum "$MAGIC_FILE" rsync://$TARGET_ADDR + + echo "done $STATE" + +elif [ "$WSREP_SST_OPT_ROLE" = "joiner" ] +then + wsrep_check_programs lsof socat + + touch $SST_PROGRESS_FILE + MYSQLD_PID=$WSREP_SST_OPT_PARENT + + RSYNC_PID="$WSREP_SST_OPT_DATA/$MODULE.pid" + + if check_pid $RSYNC_PID + then + wsrep_log_error "rsync daemon already running." + exit 114 # EALREADY + fi + rm -rf "$RSYNC_PID" + + ADDR=$WSREP_SST_OPT_ADDR + RSYNC_PORT=$(echo $ADDR | awk -F ':' '{ print $2 }') + if [ -z "$RSYNC_PORT" ] + then + RSYNC_PORT=4444 + ADDR="$(echo $ADDR | awk -F ':' '{ print $1 }'):$RSYNC_PORT" + fi + + SOCAT_ADDR=$(echo $ADDR | awk -F ':' '{ print $1 }') + # map to name in case we received an IP + SOCAT_HOST=$(getent hosts $SOCAT_ADDR | awk '{ print $2 }') + if [ -z "$SOCAT_HOST" ]; then + SOCAT_HOST=$SOCAT_ADDR + fi + SOCAT_PORT=$RSYNC_PORT + + trap "exit 32" HUP PIPE + trap "exit 3" INT TERM ABRT + trap cleanup_joiner EXIT + + RSYNC_CONF="$WSREP_SST_OPT_DATA/$MODULE.conf" + + if [ -n "${MYSQL_TMP_DIR:-}" ] ; then + SILENT="log file = $MYSQL_TMP_DIR/rsynd.log" + else + SILENT="" + fi + +cat << EOF > "$RSYNC_CONF" +pid file = $RSYNC_PID +use chroot = no +read only = no +timeout = 300 +$SILENT +[$MODULE] + path = $WSREP_SST_OPT_DATA +[$MODULE-log_dir] + path = $WSREP_LOG_DIR +EOF + +# rm -rf "$DATA"/ib_logfile* # we don't want old logs around + + # Socat receives rsync connections from the donor + SOCAT_SRC=openssl-listen:$SOCAT_PORT,bind=$SOCAT_HOST,reuseaddr,fork,$SOCAT_OPTS + SOCAT_DST=tcp:localhost:$RSYNC_PORT + wsrep_log_info "Setting up tunnel for joiner: socat $SOCAT_SRC $SOCAT_DST" + socat $SOCAT_SRC $SOCAT_DST & + SOCAT_REAL_PID=$! + # This is ok because a local galera node doesn't run SST concurrently + echo $SOCAT_REAL_PID >"$SOCAT_PID" + until check_pid_and_port $SOCAT_PID $SOCAT_REAL_PID $SOCAT_PORT $SOCAT_HOST "socat" + do + sleep 0.2 + done + + wsrep_log_info "rsync --daemon --no-detach --address localhost --port $RSYNC_PORT --config \"$RSYNC_CONF\"" + rsync --daemon --no-detach --address localhost --port $RSYNC_PORT --config "$RSYNC_CONF" & + RSYNC_REAL_PID=$! + + until check_pid_and_port $RSYNC_PID $RSYNC_REAL_PID $RSYNC_PORT localhost "rsync" + do + sleep 0.2 + done + + echo "ready $ADDR/$MODULE" + + # wait for SST to complete by monitoring magic file + while [ ! -r "$MAGIC_FILE" ] && check_pid "$RSYNC_PID" && \ + check_pid "$SOCAT_PID" && ps -p $MYSQLD_PID >/dev/null + do + sleep 1 + done + + if ! ps -p $MYSQLD_PID >/dev/null + then + wsrep_log_error \ + "Parent mysqld process (PID:$MYSQLD_PID) terminated unexpectedly." + exit 32 + fi + + if ! [ -z $WSREP_SST_OPT_BINLOG ] + then + + pushd $BINLOG_DIRNAME &> /dev/null + if [ -f $BINLOG_TAR_FILE ] + then + # Clean up old binlog files first + rm -f ${BINLOG_FILENAME}.* + wsrep_log_info "Extracting binlog files:" + tar -xvf $BINLOG_TAR_FILE >&2 + for ii in $(ls -1 ${BINLOG_FILENAME}.*) + do + echo ${BINLOG_DIRNAME}/${ii} >> ${BINLOG_FILENAME}.index + done + fi + popd &> /dev/null + fi + if [ -r "$MAGIC_FILE" ] + then + # UUID:seqno & wsrep_gtid_domain_id is received here. + cat "$MAGIC_FILE" # Output : UUID:seqno wsrep_gtid_domain_id + else + # this message should cause joiner to abort + echo "rsync process ended without creating '$MAGIC_FILE'" + fi + wsrep_cleanup_progress_file +# cleanup_joiner +else + wsrep_log_error "Unrecognized role: '$WSREP_SST_OPT_ROLE'" + exit 22 # EINVAL +fi + +rm -f $BINLOG_TAR_FILE || : + +exit 0 diff --git a/SPECS/mariadb.spec b/SPECS/mariadb.spec new file mode 100644 index 0000000..672a99c --- /dev/null +++ b/SPECS/mariadb.spec @@ -0,0 +1,3168 @@ +# SCL stuff +%{?scl:%scl_package mariadb} +%{!?scl:%global pkg_name %{name}} + +# This is a fix for the https://fedoraproject.org/wiki/Changes/CMake_to_do_out-of-source_builds +# So the beaviour will be the same also in F31 nad F32 +%undefine __cmake_in_source_build + +# Prefix that is used for patches +%global pkgnamepatch mariadb + +# Regression tests may take a long time (many cores recommended), skip them by +%{!?runselftest:%global runselftest 1} + +# Set this to 1 to see which tests fail, but 0 on production ready build +%global ignore_testsuite_result 0 + +# The last version on which the full testsuite has been run +# In case of further rebuilds of that version, don't require full testsuite to be run +# run only "main" suite +%global last_tested_version 10.5.9 +# Set to 1 to force run the testsuite even if it was already tested in current version +%global force_run_testsuite 0 + +# Aditional SELinux rules +%global require_mysql_selinux 1 + +# In f20+ use unversioned docdirs, otherwise the old versioned one +%global _pkgdocdirname %{pkg_name}%{!?_pkgdocdir:-%{version}} +%{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{pkg_name}-%{version}} + +# By default, patch(1) creates backup files when chunks apply with offsets. +# Turn that off to ensure such files don't get included in RPMs (cf bz#884755). +%global _default_patch_flags --no-backup-if-mismatch + + + +# TokuDB engine - DEPRECATED ! +# https://mariadb.com/kb/en/mariadb/tokudb/ +# TokuDB engine is available only for x86_64 +# The Percona upstream deprecated the SE. It is not part of MariaDB 10.5 +# Mroonga engine +# https://mariadb.com/kb/en/mariadb/about-mroonga/ +# Current version in MariaDB, 7.07, only supports the x86_64 +# Mroonga upstream warns about using 32-bit package: http://mroonga.org/docs/install.html +# RocksDB engine +# https://mariadb.com/kb/en/library/about-myrocks-for-mariadb/ +# RocksDB engine is available only for x86_64 +# RocksDB may be built with jemalloc, if specified in CMake +%ifarch x86_64 +%if 0%{?fedora} +# TokuDB is deprecated in MariaDB 10.5 and later +%bcond_with tokudb +%bcond_without mroonga +%bcond_without rocksdb +%else +%bcond_with tokudb +%bcond_with mroonga +%bcond_with rocksdb +%endif +%endif + +# The Open Query GRAPH engine (OQGRAPH) is a computation engine allowing +# hierarchies and more complex graph structures to be handled in a relational fashion +%bcond_without oqgraph + +# PAM authentication plugin +%bcond_without pam + +# Other plugins +%if 0%{?fedora} +%bcond_without cracklib +%bcond_without sphinx +%else +%bcond_with cracklib +%bcond_with sphinx +%endif + +%bcond_without connect +%bcond_without gssapi + +# For some use cases we do not need some parts of the package. Set to "...with" to exclude +%if 0%{?fedora} || 0%{?rhel} > 7 +%bcond_with clibrary +%else +%bcond_without clibrary +%endif +%if 0%{?scl:1} +%bcond_with embedded +%else +%bcond_without embedded +%endif +%bcond_without devel +%bcond_without client +%bcond_without common +%bcond_without errmsg +%bcond_without test +%bcond_without galera +%bcond_without backup + +# When there is already another package that ships /etc/my.cnf, +# rather include it than ship the file again, since conflicts between +# those files may create issues +%if 0%{?fedora} || 0%{?rhel} > 7 +%bcond_with config +%else +%bcond_without config +%endif + +# For deep debugging we need to build binaries with extra debug info +%bcond_with debug + +# Page compression algorithms for InnoDB & XtraDB +# lz4 currently cannot be turned off by CMake, only by not having lz4-devel package in the buildroot +# https://jira.mariadb.org/browse/MDEV-15932 +%bcond_without lz4 + +# MariaDB 10.5 and later requires pcre >= 10.34, but deliberately not using the +# the bundled library, since the package builds fine with the older version +# and bundling pcre2 library looks like not necessary. +# https://mariadb.com/kb/en/pcre/ +%if 0%{?fedora} || 0%{?rhel} >= 7 +%bcond_without unbundled_pcre +%else +%bcond_with unbundled_pcre +%global pcre_bundled_version 10.36 +%endif + +# Use main python interpretter version +%if 0%{?fedora} || 0%{?rhel} > 7 +%global python_path /usr/bin/python3 +%else +%global python_path /usr/bin/python2 +%endif + +# Include systemd files +%global daemon_name %{name} +%global daemon_no_prefix %{pkg_name} +%global mysqld_pid_dir %{name} + +# We define some system's well known locations here so we can use them easily +# later when building to another location (like SCL) +%if 0%{?scl:1} +%global logrotateddir %{_root_sysconfdir}/logrotate.d +%else +%global logrotateddir %{_sysconfdir}/logrotate.d +%endif +%global logfiledir %{_localstatedir}/log/%{daemon_no_prefix} +%global logfile %{logfiledir}/%{daemon_no_prefix}.log +# Directory for storing pid file +%global pidfiledir %{_rundir}/%{mysqld_pid_dir} +# Defining where database data live +%global dbdatadir %{_localstatedir}/lib/mysql +# Home directory of mysql user should be same for all packages that create it +%global mysqluserhome /var/lib/mysql + +# Provide mysql names for compatibility +%if 0%{?fedora} +%bcond_without mysql_names +%else +%bcond_with mysql_names +%endif +# Explicit conflicts with mysql +%if 0%{?scl:1} +%bcond_with conflicts +%else +%bcond_without conflicts +%endif + +# Make long macros shorter +%global sameevr %{epoch}:%{version}-%{release} + +%if 0%{?scl:1} +%global scl_upper %{lua:print(string.upper(string.gsub(rpm.expand("%{scl}"), "-", "_")))} +%endif + +Name: %{?scl_prefix}mariadb +Version: 10.5.9 +Release: 2%{?with_debug:.debug}%{?dist} +Epoch: 3 + +Summary: A very fast and robust SQL database server +URL: http://mariadb.org +# Exceptions allow client libraries to be linked with most open source SW, not only GPL code. See README.mysql-license +License: GPLv2 with exceptions and LGPLv2 and BSD + +# Original upstream sources archive URL +# Source0: https://downloads.mariadb.org/interstitial/mariadb-%{version}/source/mariadb-%{version}.tar.gz +# Non-existent URL containing correct archive name +# The archive was created by executing the "generate-modified-sources.sh" script +Source0: https://fedoraproject.org/mariadb-%{version}-downstream_modified.tar.gz + +Source2: mysql_config_multilib.sh +Source3: my.cnf.in +Source6: README.mysql-docs +Source7: README.mysql-license +Source8: README.wsrep_sst_rsync_tunnel +Source10: mysql.tmpfiles.d.in +Source11: mysql.service.in +Source12: mysql-prepare-db-dir.sh +Source14: mysql-check-socket.sh +Source15: mysql-scripts-common.sh +Source16: mysql-check-upgrade.sh +Source18: mysql@.service.in +Source40: daemon-scl-helper.sh +Source50: rh-skipped-tests-base.list +Source51: rh-skipped-tests-arm.list +Source52: rh-skipped-tests-s390.list +Source53: rh-skipped-tests-ppc.list +# Proposed upstream: https://jira.mariadb.org/browse/MDEV-12442 +# General upstream response was slightly positive +Source70: clustercheck.sh +Source71: LICENSE.clustercheck +# Upstream said: "Generally MariaDB has more allows to allow for xtradb sst mechanism". +# https://jira.mariadb.org/browse/MDEV-12646 +Source72: mariadb-server-galera.te +# Script to support encrypted rsync transfers when SST is required between nodes. +# https://github.com/dciabrin/wsrep_sst_rsync_tunnel/blob/master/wsrep_sst_rsync_tunnel +Source73: wsrep_sst_rsync_tunnel + +# Patch4: Red Hat distributions specific logrotate fix +# it would be big unexpected change, if we start shipping it now. Better wait for MariaDB 10.2 +Patch4: %{pkgnamepatch}-logrotate.patch +# Patch7: add to the CMake file all files where we want macros to be expanded +Patch7: %{pkgnamepatch}-scripts.patch +# Patch9: pre-configure to comply with guidelines +Patch9: %{pkgnamepatch}-ownsetup.patch +# Patch10: Fix cipher name in the SSL Cipher name test +Patch10: %{pkgnamepatch}-ssl-cipher-tests.patch +# Patch11: Use PCDIR CMake option, if configured +Patch11: %{pkgnamepatch}-pcdir.patch +# Patch16: Add option to edit groonga's and groonga-normalizer-mysql install path +Patch16: %{pkgnamepatch}-groonga.patch +# Patch17: Revert of an upstream commit +Patch17: upstream_5cc2096f93b7f130b36f8bc0fc43440db9a848e4.patch + +# Patches specific for scl +Patch90: %{pkgnamepatch}-scl-env-check.patch + +BuildRequires: cmake gcc-c++ +BuildRequires: multilib-rpm-config +BuildRequires: selinux-policy-devel +BuildRequires: systemd systemd-devel + +# Page compression algorithms for InnoDB & XtraDB +BuildRequires: zlib-devel +%{?with_lz4:BuildRequires: lz4-devel} + +# asynchornous operations stuff; needed also for wsrep API +BuildRequires: libaio-devel +# commands history features +BuildRequires: libedit-devel +# CLI graphic; needed also for wsrep API +BuildRequires: ncurses-devel +# debugging stuff +BuildRequires: systemtap-sdt-devel +# Bison SQL parser; needed also for wsrep API +BuildRequires: bison bison-devel + +%{?with_debug:BuildRequires: valgrind-devel} + +# auth_pam.so plugin will be build if pam-devel is installed +BuildRequires: pam-devel +# use either new enough version of pcre2 or provide bundles(pcre2) +%{?with_unbundled_pcre:BuildRequires: pcre2-devel} +%{!?with_unbundled_pcre:Provides: bundled(pcre2) = %{pcre_bundled_version}} +# Few utilities needs Perl +%if 0%{?fedora} || 0%{?rhel} > 7 +BuildRequires: perl-interpreter +BuildRequires: perl-generators +%endif +# Some tests requires python +%if 0%{?scl:1} +BuildRequires: python +%else +BuildRequires: python3 +%endif +# Tests requires time and ps and some perl modules +BuildRequires: procps +BuildRequires: time +BuildRequires: perl(base) +BuildRequires: perl(Cwd) +BuildRequires: perl(Data::Dumper) +BuildRequires: perl(English) +BuildRequires: perl(Env) +BuildRequires: perl(Errno) +BuildRequires: perl(Exporter) +BuildRequires: perl(Fcntl) +BuildRequires: perl(File::Basename) +BuildRequires: perl(File::Copy) +BuildRequires: perl(File::Find) +BuildRequires: perl(File::Spec) +BuildRequires: perl(File::Spec::Functions) +BuildRequires: perl(File::Temp) +BuildRequires: perl(Getopt::Long) +BuildRequires: perl(IO::File) +BuildRequires: perl(IO::Handle) +BuildRequires: perl(IO::Select) +BuildRequires: perl(IO::Socket) +BuildRequires: perl(IO::Socket::INET) +BuildRequires: perl(IPC::Open3) +BuildRequires: perl(lib) +BuildRequires: perl(Memoize) +BuildRequires: perl(POSIX) +BuildRequires: perl(Socket) +BuildRequires: perl(strict) +BuildRequires: perl(Symbol) +BuildRequires: perl(Sys::Hostname) +BuildRequires: perl(Term::ANSIColor) +BuildRequires: perl(Test::More) +BuildRequires: perl(Time::HiRes) +BuildRequires: perl(Time::localtime) +BuildRequires: perl(warnings) +# for running some openssl tests rhbz#1189180 +BuildRequires: openssl openssl-devel + +%if %{with debug} +BuildRequires: valgrind-devel +%endif + +Requires: bash coreutils grep + +Requires: %{name}-common%{?_isa} = %{sameevr} + +%if %{with clibrary} +# Explicit EVR requirement for -libs is needed for RHBZ#1406320 +Requires: %{name}-libs%{?_isa} = %{sameevr} +%else +# If not built with client library in this package, use connector-c +%if ! 0%{?scl:1} +Requires: mariadb-connector-c >= 3.0 +%endif +%endif +%{?scl:Requires:%scl_runtime} + +%if %{with mysql_names} +Provides: mysql = %{sameevr} +Provides: mysql%{?_isa} = %{sameevr} +Provides: mysql-compat-client = %{sameevr} +Provides: mysql-compat-client%{?_isa} = %{sameevr} +%endif + +%if ! 0%{?scl:1} +Suggests: %{name}-server%{?_isa} = %{sameevr} +%endif +# MySQL (with caps) is upstream's spelling of their own RPMs for mysql +%{?with_conflicts:Conflicts: mysql} + +# Filtering: https://docs.fedoraproject.org/en-US/packaging-guidelines/AutoProvidesAndRequiresFiltering/ +%global __requires_exclude ^perl\\((hostnames|lib::mtr|lib::v1|mtr_|My::|wsrep) +%global __provides_exclude_from ^(%{_datadir}/(mysql|mysql-test)/.*|%{_libdir}/%{pkg_name}/plugin/.*\\.so)$ + +# Define license macro if not present +%{!?_licensedir:%global license %doc} + +%description +MariaDB is a community developed branch of MySQL - a multi-user, multi-threaded +SQL database server. It is a client/server implementation consisting of +a server daemon (mysqld) and many different client programs and libraries. +The base package contains the standard MariaDB/MySQL client programs and +generic MySQL files. + + +%if %{with clibrary} +%package libs +Summary: The shared libraries required for MariaDB/MySQL clients +Requires: %{name}-common%{?_isa} = %{sameevr} +%{?scl:Requires:%scl_runtime} +%if %{with mysql_names} +Provides: mysql-libs = %{sameevr} +Provides: mysql-libs%{?_isa} = %{sameevr} +%endif + +%description libs +The mariadb-libs package provides the essential shared libraries for any +MariaDB/MySQL client program or interface. You will need to install this +package to use any other MariaDB package or any clients that need to connect +to a MariaDB/MySQL server. +%endif + + +# At least main config file /etc/my.cnf is shared for client and server part +# Since we want to support combination of different client and server +# implementations (e.g. mariadb library and community-mysql server), +# we need the config file(s) to be in a separate package, so no extra packages +# are pulled, because these would likely conflict. +# More specifically, the dependency on the main configuration file (/etc/my.cnf) +# is supposed to be defined as Requires: /etc/my.cnf rather than requiring +# a specific package, so installer app can choose whatever package fits to +# the transaction. +%if %{with config} +%package config +Summary: The config files required by server and client +%{?scl:Requires:%scl_runtime} + +%description config +The package provides the config file my.cnf and my.cnf.d directory used by any +MariaDB or MySQL program. You will need to install this package to use any +other MariaDB or MySQL package if the config files are not provided in the +package itself. +%endif + + +%if %{with common} +%package common +Summary: The shared files required by server and client +Requires: %{_sysconfdir}/my.cnf +%{?scl:Requires:%scl_runtime} + + +%if %{without clibrary} +Obsoletes: %{name}-libs <= %{sameevr} +%endif + +%description common +The package provides the essential shared files for any MariaDB program. +You will need to install this package to use any other MariaDB package. +%endif + + +%if %{with errmsg} +%package errmsg +Summary: The error messages files required by server and embedded +Requires: %{name}-common%{?_isa} = %{sameevr} +%{?scl:Requires:%scl_runtime} + +%description errmsg +The package provides error messages files for the MariaDB daemon and the +embedded server. You will need to install this package to use any of those +MariaDB packages. +%endif + + +%if %{with galera} +%package server-galera +Summary: The configuration files and scripts for galera replication +Requires: %{name}-common%{?_isa} = %{sameevr} +Requires: %{name}-server%{?_isa} = %{sameevr} +Requires: %{?scl_prefix}galera >= 26.4.3 +Requires(post): libselinux-utils +Requires(post): policycoreutils-python +# wsrep requirements +Requires: lsof +# Default wsrep_sst_method +Requires: rsync +%{?scl:Requires:%scl_runtime} + +%description server-galera +MariaDB is a multi-user, multi-threaded SQL database server. It is a +client/server implementation consisting of a server daemon (mysqld) +and many different client programs and libraries. This package contains +the MariaDB server and some accompanying files and directories. +MariaDB is a community developed branch of MySQL. +%endif + + +%package server +Summary: The MariaDB server and related files + +# note: no version here = %%{version}-%%{release} +%if %{with mysql_names} +Requires: mysql-compat-client%{?_isa} +Requires: mysql%{?_isa} +%if 0%{?scl:1} +Requires: %{name}%{?_isa} +%else +Recommends: %{name}%{?_isa} +%endif +%else +Requires: %{name}%{?_isa} +%endif +Requires: %{name}-common%{?_isa} = %{sameevr} +Requires: %{name}-errmsg%{?_isa} = %{sameevr} +%{?scl:Requires:%scl_runtime} +%if ! 0%{?scl:1} +Recommends: %{name}-server-utils%{?_isa} = %{sameevr} +Recommends: %{name}-backup%{?_isa} = %{sameevr} +%endif +%if ! 0%{?scl:1} +%{?with_cracklib:Recommends: %{name}-cracklib-password-check%{?_isa} = %{sameevr}} +%{?with_gssapi:Recommends: %{name}-gssapi-server%{?_isa} = %{sameevr}} +%{?with_rocksdb:Suggests: %{name}-rocksdb-engine%{?_isa} = %{sameevr}} +%{?with_tokudb:Suggests: %{name}-tokudb-engine%{?_isa} = %{sameevr}} +%{?with_sphinx:Suggests: %{name}-sphinx-engine%{?_isa} = %{sameevr}} +%{?with_oqgraph:Suggests: %{name}-oqgraph-engine%{?_isa} = %{sameevr}} +%{?with_connect:Suggests: %{name}-connect-engine%{?_isa} = %{sameevr}} +%endif +%if ! 0%{?scl:1} +%{?with_cracklib:Requires: %{name}-cracklib-password-check%{?_isa} = %{sameevr}} +%endif + +%if ! 0%{?scl:1} +Suggests: mytop +Suggests: logrotate +%endif + +Requires: %{_sysconfdir}/my.cnf +Requires: %{_sysconfdir}/my.cnf.d + +# Aditional SELinux rules (common for MariaDB & MySQL) shipped in a separate package +# For cases, where we want to fix a SELinux issues in MariaDB sooner than patched selinux-policy-targeted package is released +# TODO: handle the new mariadb binaries +#%if %%{?require_mysql_selinux} +#Requires: (mysql-selinux if selinux-policy-targeted) +#%endif + +# for fuser in mysql-check-socket +Requires: psmisc + +Requires: coreutils +Requires(pre): /usr/sbin/useradd +# We require this to be present for %%{_tmpfilesdir} +Requires: systemd +# Make sure it's there when scriptlets run, too +%{?systemd_requires} +# RHBZ#1496131; use 'iproute' instead of 'net-tools' +Requires: iproute +%{?scl:Requires:%scl_runtime} +%if %{with mysql_names} +Provides: mysql-server = %{sameevr} +Provides: mysql-server%{?_isa} = %{sameevr} +Provides: mysql-compat-server = %{sameevr} +Provides: mysql-compat-server%{?_isa} = %{sameevr} +%endif +%{?with_conflicts:Conflicts: mysql-server} + +# Bench subpackage has been deprecated in F32 +Obsoletes: %{name}-bench <= %{sameevr} + +%description server +MariaDB is a multi-user, multi-threaded SQL database server. It is a +client/server implementation consisting of a server daemon (mysqld) +and many different client programs and libraries. This package contains +the MariaDB server and some accompanying files and directories. +MariaDB is a community developed branch of MySQL. + + +%if %{with oqgraph} +%package oqgraph-engine +Summary: The Open Query GRAPH engine for MariaDB +Requires: %{name}-server%{?_isa} = %{sameevr} +# boost and Judy required for oograph +%{?scl:Requires:%scl_runtime} +# boost and Judy required for oograph +BuildRequires: boost-devel +BuildRequires: %{?scl_prefix}Judy-devel + +%description oqgraph-engine +The package provides Open Query GRAPH engine (OQGRAPH) as plugin for MariaDB +database server. OQGRAPH is a computation engine allowing hierarchies and more +complex graph structures to be handled in a relational fashion. In a nutshell, +tree structures and friend-of-a-friend style searches can now be done using +standard SQL syntax, and results joined onto other tables. +%endif + + +%if %{with connect} +%package connect-engine +Summary: The CONNECT storage engine for MariaDB +Requires: %{name}-server%{?_isa} = %{sameevr} +%{?scl:Requires:%scl_runtime} + +# As per https://jira.mariadb.org/browse/MDEV-21450 +BuildRequires: libxml2-devel + +%description connect-engine +The CONNECT storage engine enables MariaDB to access external local or +remote data (MED). This is done by defining tables based on different data +types, in particular files in various formats, data extracted from other DBMS +or products (such as Excel), or data retrieved from the environment +(for example DIR, WMI, and MAC tables). +%endif + + +%if %{with backup} +%package backup +Summary: The mariabackup tool for physical online backups +Requires: %{name}-server%{?_isa} = %{sameevr} +%{?scl:Requires:%scl_runtime} +BuildRequires: libarchive-devel + +%description backup +MariaDB Backup is an open source tool provided by MariaDB for performing +physical online backups of InnoDB, Aria and MyISAM tables. +For InnoDB, "hot online" backups are possible. +%endif + + +%if %{with rocksdb} +%package rocksdb-engine +Summary: The RocksDB storage engine for MariaDB +Requires: %{name}-server%{?_isa} = %{sameevr} +%{?scl:Requires:%scl_runtime} +Provides: bundled(rocksdb) + +%description rocksdb-engine +The RocksDB storage engine is used for high performance servers on SSD drives. +%endif + + +%if %{with tokudb} +%package tokudb-engine +Summary: The TokuDB storage engine for MariaDB +Requires: %{name}-server%{?_isa} = %{sameevr} +BuildRequires: jemalloc-devel +Requires: jemalloc +%{?scl:Requires:%scl_runtime} + +%description tokudb-engine +The TokuDB storage engine from Percona. +%endif + + +%if %{with cracklib} +%package cracklib-password-check +Summary: The password strength checking plugin +Requires: %{name}-server%{?_isa} = %{sameevr} +BuildRequires: cracklib-dicts cracklib-devel +Requires: cracklib-dicts +%{?scl:Requires:%scl_runtime} + +%description cracklib-password-check +CrackLib is a password strength checking library. It is installed by default +in many Linux distributions and is invoked automatically (by pam_cracklib.so) +whenever the user login password is modified. +Now, with the cracklib_password_check password validation plugin, one can +also use it to check MariaDB account passwords. +%endif + + +%if %{with gssapi} +%package gssapi-server +Summary: GSSAPI authentication plugin for server +Requires: %{name}-server%{?_isa} = %{sameevr} +BuildRequires: krb5-devel +%{?scl:Requires:%scl_runtime} + +%description gssapi-server +GSSAPI authentication server-side plugin for MariaDB for passwordless login. +This plugin includes support for Kerberos on Unix. +%endif + + +%if %{with pam} +%package pam +Summary: PAM authentication plugin for the MariaDB server + +Requires: %{name}-server%{?_isa} = %{sameevr} +# This subpackage NEED the 'mysql' user/group (created during mariadb-server %pre) to be available prior installation +Requires(pre): %{name}-server%{?_isa} = %{sameevr} + +BuildRequires: pam-devel +%{?scl:Requires:%scl_runtime} + +%description pam +PAM authentication server-side plugin for MariaDB. +%endif + + +%if %{with sphinx} +%package sphinx-engine +Summary: The Sphinx storage engine for MariaDB +Requires: %{name}-server%{?_isa} = %{sameevr} +BuildRequires: sphinx libsphinxclient libsphinxclient-devel +Requires: sphinx libsphinxclient +%{?scl:Requires:%scl_runtime} + +%description sphinx-engine +The Sphinx storage engine for MariaDB. +%endif + + +%package server-utils +Summary: Non-essential server utilities for MariaDB/MySQL applications +Requires: %{name}-server%{?_isa} = %{sameevr} +%if %{with mysql_names} +Provides: mysql-perl = %{sameevr} +%endif +# mysqlhotcopy needs DBI/DBD support +Requires: perl(DBI) perl(DBD::mysql) +%{?scl:Requires:%scl_runtime} + +%description server-utils +This package contains all non-essential server utilities and scripts for +managing databases. It also contains all utilities requiring Perl and it is +the only MariaDB sub-package, except test subpackage, that depends on Perl. + + +%if %{with devel} +%package devel +Summary: Files for development of MariaDB/MySQL applications +%{?with_clibrary:Requires: %{name}-libs%{?_isa} = %{sameevr}} +Requires: openssl-devel +%if %{without clibrary} && ! 0%{?scl:1} +Requires: mariadb-connector-c-devel >= 3.0 +%endif +%{?scl:Requires:%scl_runtime} +%if %{with mysql_names} +Provides: mysql-devel = %{sameevr} +Provides: mysql-devel%{?_isa} = %{sameevr} +%endif + +%description devel +MariaDB is a multi-user, multi-threaded SQL database server. +MariaDB is a community developed branch of MySQL. +%if %{with clibrary} +This package contains everything needed for developing MariaDB/MySQL client +and server applications. +%else +This package contains everything needed for developing MariaDB/MySQL server +applications. For developing client applications, use mariadb-connector-c +package. +%endif +%endif + + +%if %{with embedded} +%package embedded +Summary: MariaDB as an embeddable library +Requires: %{name}-common%{?_isa} = %{sameevr} +Requires: %{name}-errmsg%{?_isa} = %{sameevr} +%{?scl:Requires:%scl_runtime} +%if %{with mysql_names} +Provides: mysql-embedded = %{sameevr} +Provides: mysql-embedded%{?_isa} = %{sameevr} +%endif + +%description embedded +MariaDB is a multi-user, multi-threaded SQL database server. This +package contains a version of the MariaDB server that can be embedded +into a client application instead of running as a separate process. +MariaDB is a community developed branch of MySQL. + + +%package embedded-devel +Summary: Development files for MariaDB as an embeddable library +Requires: %{name}-embedded%{?_isa} = %{sameevr} +Requires: %{name}-devel%{?_isa} = %{sameevr} +# embedded-devel should require libaio-devel (rhbz#1290517) +Requires: libaio-devel +%{?scl:Requires:%scl_runtime} +%if %{with mysql_names} +Provides: mysql-embedded-devel = %{sameevr} +Provides: mysql-embedded-devel%{?_isa} = %{sameevr} +%endif + +%description embedded-devel +MariaDB is a multi-user, multi-threaded SQL database server. +MariaDB is a community developed branch of MySQL. +This package contains files needed for developing and testing with +the embedded version of the MariaDB server. +%endif + + +%if %{with test} +%package test +Summary: The test suite distributed with MariaDB +Requires: %{name}%{?_isa} = %{sameevr} +Requires: %{name}-common%{?_isa} = %{sameevr} +Requires: %{name}-server%{?_isa} = %{sameevr} +Requires: patch +Requires: perl(Env) +Requires: perl(Exporter) +Requires: perl(Fcntl) +Requires: perl(File::Temp) +Requires: perl(Data::Dumper) +Requires: perl(Getopt::Long) +Requires: perl(IPC::Open3) +Requires: perl(Socket) +Requires: perl(Sys::Hostname) +Requires: perl(Test::More) +Requires: perl(Time::HiRes) +%{?scl:Requires:%scl_runtime} +%if %{with mysql_names} +Provides: mysql-test = %{sameevr} +Provides: mysql-test%{?_isa} = %{sameevr} +%endif + +%description test +MariaDB is a multi-user, multi-threaded SQL database server. +MariaDB is a community developed branch of MySQL. +This package contains the regression test suite distributed with the MariaDB +sources. +%endif + +%if 0%{?scl:1} +%scl_syspaths_package -d +%scl_syspaths_package config -d +%scl_syspaths_package backup -d +%scl_syspaths_package server -d +%scl_syspaths_package server-utils -d +%scl_syspaths_package server-galera -d +%endif + + +%prep +%setup -q -n mariadb-%{version}-downstream_modified + +# Remove JAR files that upstream puts into tarball +find . -name "*.jar" -type f -exec rm --verbose -f {} \; +# Remove testsuite for the mariadb-connector-c +rm -rf libmariadb/unittest +%if %{without rocksdb} +rm -r storage/rocksdb/ +%endif + + + +%patch4 -p1 +%patch7 -p1 +%patch9 -p1 +%patch10 -p1 +%patch11 -p1 +%patch16 -p1 +%patch17 -R -p1 + +# workaround for upstream bug #56342 +#rm mysql-test/t/ssl_8k_key-master.opt + +# generate a list of tests that fail, but are not disabled by upstream +cat %{SOURCE50} | tee -a mysql-test/unstable-tests + +# disable some tests failing on different architectures +%ifarch %{arm} aarch64 +cat %{SOURCE51} | tee -a mysql-test/unstable-tests +%endif + +%ifarch s390 s390x +cat %{SOURCE52} | tee -a mysql-test/unstable-tests +%endif + +%ifarch ppc ppc64 ppc64p7 ppc64le +cat %{SOURCE53} | tee -a mysql-test/unstable-tests +%endif + +cp %{SOURCE2} %{SOURCE3} %{SOURCE10} %{SOURCE11} %{SOURCE12} \ + %{SOURCE14} %{SOURCE15} %{SOURCE16} %{SOURCE18} %{SOURCE70} %{SOURCE73} scripts + +%if 0%{?scl:1} +%patch90 -p1 -b .p90 +%endif + +%if %{with galera} +# prepare selinux policy +mkdir selinux +sed 's/mariadb-server-galera/%{name}-server-galera/' %{SOURCE72} > selinux/%{name}-server-galera.te +%endif + + +# Get version of PCRE, that upstream use +pcre_version=`grep -e "URL\s" cmake/pcre.cmake | sed -r "s;[^0123456789]*2-([[:digit:]]+\.[[:digit:]]+)\.[^0123456789]*;\1;"` + +# Check if the PCRE version in macro 'pcre_bundled_version', used in Provides: bundled(...), is the same version as upstream actually bundles +%if %{without unbundled_pcre} +if [ %{pcre_bundled_version} != "$pcre_version" ] ; then + echo "\n Error: Bundled PCRE version is not correct. \n\tBundled version number:%{pcre_bundled_version} \n\tUpstream version number: $pcre_version\n" + exit 1 +fi +%else +# Check if the PCRE version that upstream use, is the same as the one present in system +# This is explicitly ignored at this point as it looks like the system version +# looks good so far, despite upstram's recommendation +#pcre_system_version=`pkgconf %{?scl:%{_root_libdir}}%{!?scl:%{_libdir}}/pkgconfig/libpcre.pc --modversion 2>/dev/null ` + +#if [ "$pcre_system_version" != "$pcre_version" ] ; then +# echo "\n Warning: Error: Bundled PCRE version is not correct. \n\tSystem version number:$pcre_system_version \n\tUpstream version number: $pcre_version\n" +#fi +%endif + + + +%build +# This package has static probe points which do not currently +# work with LTO and result in undefined symbols at link time. +# This is being worked on in upstream GCC +%define _lto_cflags %{nil} + +# fail quickly and obviously if user tries to build as root +%if %runselftest + if [ x"$(id -u)" = "x0" ]; then + echo "mysql's regression tests fail if run as root." + echo "If you really need to build the RPM as root, use" + echo "--nocheck to skip the regression tests." + exit 1 + fi +%endif + +%{?scl:scl enable %{scl} %{?dts} - << "EOF"} +set -ex +# The INSTALL_xxx macros have to be specified relative to CMAKE_INSTALL_PREFIX +# so we can't use %%{_datadir} and so forth here. +%cmake . \ + -DBUILD_CONFIG=mysql_release \ + -DFEATURE_SET="community" \ + -DINSTALL_LAYOUT=RPM \ + -DDAEMON_NAME="%{daemon_name}" \ + -DDAEMON_NO_PREFIX="%{daemon_no_prefix}" \ +%if 0%{?scl:1} + -DSCL_NAME="%{?scl}" \ + -DSCL_NAME_UPPER="%{?scl_upper}" \ + -DSCL_SCRIPTS="%{?_scl_scripts}" \ +%endif + -DLOG_LOCATION="%{logfile}" \ + -DPID_FILE_DIR="%{pidfiledir}" \ + -DNICE_PROJECT_NAME="MariaDB" \ + -DRPM="%{?rhel:rhel%{rhel}}%{!?rhel:fedora%{fedora}}" \ + -DCMAKE_INSTALL_PREFIX="%{_prefix}" \ + -DINSTALL_SYSCONFDIR="%{_sysconfdir}" \ + -DINSTALL_SYSCONF2DIR="%{_sysconfdir}/my.cnf.d" \ + -DINSTALL_DOCDIR="share/doc/%{_pkgdocdirname}" \ + -DINSTALL_DOCREADMEDIR="share/doc/%{_pkgdocdirname}" \ + -DINSTALL_INCLUDEDIR=include/mysql \ + -DINSTALL_INFODIR=share/info \ + -DINSTALL_LIBDIR="%{_lib}" \ + -DINSTALL_MANDIR=share/man \ + -DINSTALL_MYSQLSHAREDIR=share/%{pkg_name} \ + -DINSTALL_MYSQLTESTDIR=%{?with_test:share/mysql-test}%{!?with_test:} \ + -DINSTALL_PLUGINDIR="%{_lib}/%{pkg_name}/plugin" \ + -DINSTALL_SBINDIR=libexec \ + -DINSTALL_SCRIPTDIR=bin \ + -DINSTALL_SUPPORTFILESDIR=share/%{pkg_name} \ + -DINSTALL_PCDIR=%{_lib}/pkgconfig \ + -DMYSQL_DATADIR="%{dbdatadir}" \ + -DMYSQL_UNIX_ADDR="/var/lib/mysql/mysql.sock" \ + -DTMPDIR=/var/tmp \ + -DGRN_DATA_DIR=share/%{name}-server/groonga \ + -DGROONGA_NORMALIZER_MYSQL_PROJECT_NAME=%{name}-server/groonga-normalizer-mysql \ + -DENABLED_LOCAL_INFILE=ON \ + -DENABLE_DTRACE=ON \ + -DSECURITY_HARDENED=ON \ + -DWITH_WSREP=%{?with_galera:ON}%{!?with_galera:OFF} \ + -DWITH_INNODB_DISALLOW_WRITES=%{?with_galera:ON}%{!?with_galera:OFF} \ + -DWITH_EMBEDDED_SERVER=%{?with_embedded:ON}%{!?with_embedded:OFF} \ + -DWITH_MARIABACKUP=%{?with_backup:ON}%{!?with_backup:NO} \ + -DWITH_UNIT_TESTS=%{?with_test:ON}%{!?with_test:NO} \ + -DCONC_WITH_SSL=%{?with_clibrary:ON}%{!?with_clibrary:NO} \ + -DWITH_SSL=system \ + -DWITH_ZLIB=system \ + -DWITH_PCRE=system \ + -DWITH_JEMALLOC=%{?with_tokudb:yes}%{!?with_tokudb:no} \ + -DLZ4_LIBS=%{_libdir}/liblz4.so \ + -DLZ4_LIBS=%{?with_lz4:%{_libdir}/liblz4.so}%{!?with_lz4:} \ + -DWITH_INNODB_LZ4=%{?with_lz4:ON}%{!?with_lz4:OFF} \ + -DWITH_ROCKSDB_LZ4=%{?with_lz4:ON}%{!?with_lz4:OFF} \ + -DPLUGIN_MROONGA=%{?with_mroonga:DYNAMIC}%{!?with_mroonga:NO} \ + -DPLUGIN_OQGRAPH=%{?with_oqgraph:DYNAMIC}%{!?with_oqgraph:NO} \ + -DPLUGIN_CRACKLIB_PASSWORD_CHECK=%{?with_cracklib:DYNAMIC}%{!?with_cracklib:NO} \ + -DPLUGIN_ROCKSDB=%{?with_rocksdb:DYNAMIC}%{!?with_rocksdb:NO} \ + -DPLUGIN_SPHINX=%{?with_sphinx:DYNAMIC}%{!?with_sphinx:NO} \ + -DPLUGIN_TOKUDB=%{?with_tokudb:DYNAMIC}%{!?with_tokudb:NO} \ + -DPLUGIN_CONNECT=%{?with_connect:DYNAMIC}%{!?with_connect:NO} \ + -DPLUGIN_CLIENT_ED25519=OFF \ + -DPLUGIN_CACHING_SHA2_PASSWORD=OFF \ + -DPYTHON_SHEBANG=%{python_path} \ + -DPYTHON_SHEBANG=%{__python} \ + -DPLUGIN_AWS_KEY_MANAGEMENT=NO \ + -DCONNECT_WITH_MONGO=OFF \ + -DCONNECT_WITH_JDBC=OFF \ +%{?with_debug: -DCMAKE_BUILD_TYPE=Debug -DWITH_ASAN=OFF -DWITH_INNODB_EXTRA_DEBUG=ON -DWITH_VALGRIND=ON} + + +CFLAGS="$CFLAGS -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" +# force PIC mode so that we can build libmysqld.so +CFLAGS="$CFLAGS -fPIC" + +%if %{with debug} +# Override all optimization flags when making a debug build +# -D_FORTIFY_SOURCE requires optimizations enabled. Disable the fortify. +CFLAGS=`echo "$CFLAGS" | sed -r 's/-D_FORTIFY_SOURCE=[012]/-D_FORTIFY_SOURCE=0/'` +CFLAGS=`echo "$CFLAGS" | sed -r 's/-O[0123]//'` + +CFLAGS="$CFLAGS -O0 -g -D_FORTIFY_SOURCE=0" + +# Fixes for Fedora 32 & Rawhide (GCC 10.0): +%if 0%{?fedora} >= 32 +CFLAGS="$CFLAGS -Wno-error=class-memaccess" +CFLAGS="$CFLAGS -Wno-error=enum-conversion" +%endif # f32 +%endif # debug + +CXXFLAGS="$CFLAGS" +CPPFLAGS="$CFLAGS" +export CFLAGS CXXFLAGS CPPFLAGS + + +# Print all Cmake options values; "-LAH" means "List Advanced Help" +cmake -LAH + +#%cmake_build + +# to safe disk space, do not use ccache +export CCACHE_DISABLE=1 +# do not use %%{?_smp_mflags} to safe memory and avoid build failure due to not enough resources +make -j2 VERBOSE=1 + +%{?scl:EOF} + + +# build selinux policy +%if %{with galera} +pushd selinux +make -f /usr/share/selinux/devel/Makefile %{name}-server-galera.pp +%endif + + + +%install +#%cmake_install +%{?scl:scl enable %{scl} %{?dts} - << "EOF"} +set -ex +make DESTDIR=%{buildroot} install +%{?scl:EOF} + +# multilib header support #1625157 +for header in mysql/server/my_config.h mysql/server/private/config.h; do +%multilib_fix_c_header --file %{_includedir}/$header +done + +ln -s mysql_config.1.gz %{buildroot}%{_mandir}/man1/mariadb_config.1.gz + +# multilib support for shell scripts +# we only apply this to known Red Hat multilib arches, per bug #181335 +if [ %multilib_capable ] +then +mv %{buildroot}%{_bindir}/mysql_config %{buildroot}%{_bindir}/mysql_config-%{__isa_bits} +install -p -m 0755 scripts/mysql_config_multilib %{buildroot}%{_bindir}/mysql_config +# Copy manual page for multilib mysql_config; https://jira.mariadb.org/browse/MDEV-11961 +ln -s mysql_config.1 %{buildroot}%{_mandir}/man1/mysql_config-%{__isa_bits}.1 +fi + +%if %{without clibrary} +# We don't ship the client library part in SCL +rm %{buildroot}%{_libdir}/pkgconfig/libmariadb.pc +%endif + +# install INFO_SRC, INFO_BIN into libdir (upstream thinks these are doc files, +# but that's pretty wacko --- see also %%{name}-file-contents.patch) +install -p -m 644 Docs/INFO_SRC %{buildroot}%{_libdir}/%{pkg_name}/ +install -p -m 644 Docs/INFO_BIN %{buildroot}%{_libdir}/%{pkg_name}/ +rm -r %{buildroot}%{_datadir}/doc/%{_pkgdocdirname}/MariaDB-server-%{version}/ + +# Logfile creation +mkdir -p %{buildroot}%{logfiledir} +chmod 0750 %{buildroot}%{logfiledir} +touch %{buildroot}%{logfile} + +# current setting in my.cnf is to use /var/run/mariadb for creating pid file, +# however since my.cnf is not updated by RPM if changed, we need to create mysqld +# as well because users can have odd settings in their /etc/my.cnf +mkdir -p %{buildroot}%{pidfiledir} +install -p -m 0755 -d %{buildroot}%{dbdatadir} + +# create directory for socket +%{?scl:install -p -m 0755 -d %{buildroot}/var/lib/mysql} + +%if %{with config} +install -D -p -m 0644 scripts/my.cnf %{buildroot}%{_sysconfdir}/my.cnf +%else +rm scripts/my.cnf +%endif + +# use different config file name for each variant of server (mariadb / mysql) +mv %{buildroot}%{_sysconfdir}/my.cnf.d/server.cnf %{buildroot}%{_sysconfdir}/my.cnf.d/%{pkg_name}-server.cnf + +# Rename sysusers and tmpfiles config files, they should be named after the software they belong to +mv %{buildroot}%{_sysusersdir}/mariadb.conf %{buildroot}%{_sysusersdir}/%{name}.conf +rm %{buildroot}%{_tmpfilesdir}/mariadb.conf + +# remove SysV init script and a symlink to that, we use systemd +rm %{buildroot}%{_libexecdir}/rcmysql +# install systemd unit files and scripts for handling server startup +rm -f %{buildroot}%{_unitdir}/%{pkg_name}.service +install -D -p -m 644 scripts/mysql.service %{buildroot}%{_unitdir}/%{daemon_name}.service +install -D -p -m 644 scripts/mysql@.service %{buildroot}%{_unitdir}/%{daemon_name}@.service + +# Install downstream version of tmpfiles +install -D -p -m 0644 scripts/mysql.tmpfiles.d %{buildroot}%{_tmpfilesdir}/%{name}.conf +%if 0%{?mysqld_pid_dir:1} +echo "d %{pidfiledir} 0755 mysql mysql -" >>%{buildroot}%{_tmpfilesdir}/%{name}.conf +%endif + +# helper scripts for service starting +install -p -m 755 scripts/mysql-prepare-db-dir %{buildroot}%{_libexecdir}/mysql-prepare-db-dir +install -p -m 755 scripts/mysql-check-socket %{buildroot}%{_libexecdir}/mysql-check-socket +install -p -m 755 scripts/mysql-check-upgrade %{buildroot}%{_libexecdir}/mysql-check-upgrade +install -p -m 644 scripts/mysql-scripts-common %{buildroot}%{_libexecdir}/mysql-scripts-common + +# daemon helper for fixing SELinux in systemd +%if 0%{?scl:1} +install -p -m 755 %{SOURCE40} %{buildroot}%{_libexecdir}/mysqld-scl-helper +%endif + +# install aditional galera selinux policy +%if %{with galera} +install -p -m 644 -D selinux/%{name}-server-galera.pp %{buildroot}%{_datadir}/selinux/packages/%{name}/%{name}-server-galera.pp +%endif + +%if %{with test} +# mysql-test includes one executable that doesn't belong under /usr/share, so move it and provide a symlink +mv %{buildroot}%{_datadir}/mysql-test/lib/My/SafeProcess/my_safe_process %{buildroot}%{_bindir} +ln -s ../../../../../bin/my_safe_process %{buildroot}%{_datadir}/mysql-test/lib/My/SafeProcess/my_safe_process +# Provide symlink expected by RH QA tests +ln -s unstable-tests %{buildroot}%{_datadir}/mysql-test/rh-skipped-tests.list +%endif + + +# Client that uses libmysqld embedded server. +# Pretty much like normal mysql command line client, but it doesn't require a running mariadb server. +%{?with_embedded:rm %{buildroot}%{_bindir}/{mariadb-,mysql_}embedded} +rm %{buildroot}%{_mandir}/man1/{mysql_,mariadb-}embedded.1* +# Static libraries +rm %{buildroot}%{_libdir}/*.a +# This script creates the MySQL system tables and starts the server. +# Upstream says: +# It looks like it's just "mysql_install_db && mysqld_safe" +# I've never heard of anyone using it, I'd say, no need to pack it. +rm %{buildroot}%{_datadir}/%{pkg_name}/binary-configure +# FS files first-bytes recoginiton +# Not updated by upstream since nobody realy use that +rm %{buildroot}%{_datadir}/%{pkg_name}/magic + +# Upstream ships them because of, https://jira.mariadb.org/browse/MDEV-10797 +# In Fedora we use our own systemd unit files and scripts +rm %{buildroot}%{_datadir}/%{pkg_name}/mysql.server +rm %{buildroot}%{_datadir}/%{pkg_name}/mysqld_multi.server + +# Binary for monitoring MySQL performance +# Shipped as a standalone package in Fedora +rm %{buildroot}%{_bindir}/mytop +rm %{buildroot}%{_mandir}/man1/mytop.1* + +# Should be shipped with mariadb-connector-c +rm %{buildroot}%{_mandir}/man1/mariadb_config.1* + +# put logrotate script where it needs to be +mkdir -p %{buildroot}%{logrotateddir} +mv %{buildroot}%{_datadir}/%{pkg_name}/mysql-log-rotate %{buildroot}%{logrotateddir}/%{daemon_name} +chmod 644 %{buildroot}%{logrotateddir}/%{daemon_name} + +# for compatibility with upstream RPMs, create mysqld symlink in sbin +mkdir -p %{buildroot}%{_sbindir} +ln -s %{_libexecdir}/mysqld %{buildroot}%{_sbindir}/mysqld +ln -s %{_libexecdir}/mariadbd %{buildroot}%{_sbindir}/mariadbd + +# copy additional docs into build tree so %%doc will find them +install -p -m 0644 %{SOURCE6} %{basename:%{SOURCE6}} +install -p -m 0644 %{SOURCE7} %{basename:%{SOURCE7}} +install -p -m 0644 %{SOURCE8} %{basename:%{SOURCE8}} +install -p -m 0644 %{SOURCE16} %{basename:%{SOURCE16}} +install -p -m 0644 %{SOURCE71} %{basename:%{SOURCE71}} + +# Delete upstreams service files +# We don't use this location of service files +rm %{buildroot}%{_datadir}/%{pkg_name}/systemd/{mysql,mysqld}.service +# These may come handy in a future, but right now we use our own services +rm %{buildroot}/usr/lib/systemd/system/{mysql,mysqld}.service + +# install galera config file +%if %{with galera} +sed -i -r 's|^wsrep_provider=none|wsrep_provider=%{_libdir}/galera/libgalera_smm.so|' support-files/wsrep.cnf +install -p -m 0644 support-files/wsrep.cnf %{buildroot}%{_sysconfdir}/my.cnf.d/galera.cnf +%endif +# install the clustercheck script +mkdir -p %{buildroot}%{_sysconfdir}/sysconfig +touch %{buildroot}%{_sysconfdir}/sysconfig/clustercheck +install -p -m 0755 scripts/clustercheck %{buildroot}%{_bindir}/clustercheck + +# for SCL we do not want unprefixed service file +%if 0%{?scl:1} && %{with init_systemd} +rm %{buildroot}%{_unitdir}/mariadb.service +%endif + +# remove duplicate logrotate script +rm %{buildroot}%{_sysconfdir}/logrotate.d/mysql +# Remove AppArmor files +rm -r %{buildroot}%{_datadir}/%{pkg_name}/policy/apparmor + +# Buildroot does not have symlink /lib64 --> /usr/lib64 +mv %{buildroot}/%{_lib}/security %{buildroot}%{_libdir} + +# Move new PAM auth plugin files to the correct SCL locations +mv %{buildroot}/etc/security %{buildroot}%{_sysconfdir} + +# Add wsrep_sst_rsync_tunnel script +install -p -m 0755 scripts/wsrep_sst_rsync_tunnel %{buildroot}%{_bindir}/wsrep_sst_rsync_tunnel + +# Disable plugins +%if %{with gssapi} +sed -i 's/^plugin-load-add/#plugin-load-add/' %{buildroot}%{_sysconfdir}/my.cnf.d/auth_gssapi.cnf +%endif +%if %{with cracklib} +sed -i 's/^plugin-load-add/#plugin-load-add/' %{buildroot}%{_sysconfdir}/my.cnf.d/cracklib_password_check.cnf +%endif + +# Fix Galera Replication config file +# The replication requires cluster address upon startup (which is end-user specific). +# Disable it entirely, rather than have it failing out-of-the-box. +%if %{with galera} +sed -i 's/^wsrep_on=1/wsrep_on=0/' %{buildroot}%{_sysconfdir}/my.cnf.d/galera.cnf +%endif + +%if %{without embedded} +rm %{buildroot}%{_mandir}/man1/{mysql_client_test_embedded,mysqltest_embedded}.1* +rm %{buildroot}%{_mandir}/man1/{mariadb-client-test-embedded,mariadb-test-embedded}.1* +%endif + + +%if %{without clibrary} +rm %{buildroot}%{_sysconfdir}/my.cnf.d/client.cnf +# Client library and links +rm %{buildroot}%{_libdir}/libmariadb.so.* +unlink %{buildroot}%{_libdir}/libmysqlclient.so +unlink %{buildroot}%{_libdir}/libmysqlclient_r.so +unlink %{buildroot}%{_libdir}/libmariadb.so +%if ! 0%{?scl:1} +# Client plugins +rm %{buildroot}%{_libdir}/%{pkg_name}/plugin/{dialog.so,mysql_clear_password.so,sha256_password.so,auth_gssapi_client.so} +%endif +%endif + +%if %{without clibrary} || %{without devel} +rm %{buildroot}%{_bindir}/mysql_config* +rm %{buildroot}%{_bindir}/mariadb_config +rm %{buildroot}%{_bindir}/mariadb-config +rm %{buildroot}%{_mandir}/man1/mysql_config*.1* +%endif + +%if %{without clibrary} && %{with devel} +# This files are already included in mariadb-connector-c +rm %{buildroot}%{_includedir}/mysql/mysql_version.h +rm %{buildroot}%{_includedir}/mysql/{errmsg.h,ma_list.h,ma_pvio.h,mariadb_com.h,\ +mariadb_ctype.h,mariadb_dyncol.h,mariadb_stmt.h,mariadb_version.h,ma_tls.h,mysqld_error.h,mysql.h} +rm -r %{buildroot}%{_includedir}/mysql/{mariadb,mysql} +%endif + +%if %{without devel} +rm -r %{buildroot}%{_includedir}/mysql +rm %{buildroot}%{_datadir}/aclocal/mysql.m4 +rm %{buildroot}%{_libdir}/pkgconfig/mariadb.pc +%if %{with clibrary} +rm %{buildroot}%{_libdir}/libmariadb*.so +unlink %{buildroot}%{_libdir}/libmysqlclient.so +unlink %{buildroot}%{_libdir}/libmysqlclient_r.so +%endif +%endif + +%if %{without client} +rm %{buildroot}%{_bindir}/msql2mysql +rm %{buildroot}%{_bindir}/{mysql,mariadb} +rm %{buildroot}%{_bindir}/mysql{access,admin,binlog,check,dump,_find_rows,import,_plugin,show,slap,_waitpid} +rm %{buildroot}%{_bindir}/mariadb-{access,admin,binlog,check,dump,find-rows,import,plugin,show,slap,waitpid} + +rm %{buildroot}%{_mandir}/man1/msql2mysql.1* +rm %{buildroot}%{_mandir}/man1/{mysql,mariadb}.1* +rm %{buildroot}%{_mandir}/man1/mysql{access,admin,binlog,check,dump,_find_rows,import,_plugin,show,slap,_waitpid}.1* +rm %{buildroot}%{_mandir}/man1/mariadb-{access,admin,binlog,check,dump,find-rows,import,plugin,show,slap,waitpid}.1* +%endif + +%if %{with tokudb} +%if 0%{?fedora} || 0%{?rhel} > 7 +# Move the upstream file to the correct location +mkdir -p %{buildroot}%{_unitdir}/mariadb.service.d +mv %{buildroot}/etc/systemd/system/mariadb.service.d/tokudb.conf %{buildroot}%{_unitdir}/mariadb.service.d/tokudb.conf +# Move to better location, systemd config files has to be in /lib/ +mv %{buildroot}%{_sysconfdir}/systemd/system/mariadb.service.d %{buildroot}%{_unitdir} +%endif +%endif + +%if %{without config} +rm %{buildroot}%{_sysconfdir}/my.cnf +%endif + +%if %{without common} +rm -r %{buildroot}%{_datadir}/%{pkg_name}/charsets +%endif + +%if %{without gssapi} +rm -r %{buildroot}/etc/my.cnf.d/auth_gssapi.cnf +%endif + +%if %{without errmsg} +rm %{buildroot}%{_datadir}/%{pkg_name}/errmsg-utf8.txt +rm -r %{buildroot}%{_datadir}/%{pkg_name}/{english,czech,danish,dutch,estonian,\ +french,german,greek,hungarian,italian,japanese,korean,norwegian,norwegian-ny,\ +polish,portuguese,romanian,russian,serbian,slovak,spanish,swedish,ukrainian,hindi} +%endif + +%if %{without test} +%if %{with embedded} +rm %{buildroot}%{_bindir}/{mysql_client_test_embedded,mysqltest_embedded} +rm %{buildroot}%{_bindir}/{mariadb-client-test-embedded,mariadb-test-embedded} +rm %{buildroot}%{_mandir}/man1/{mysql_client_test_embedded,mysqltest_embedded}.1* +rm %{buildroot}%{_mandir}/man1/{mariadb-client-test-embedded,mariadb-test-embedded}.1* +%endif # embedded +rm %{buildroot}%{_bindir}/test-connect-t +rm %{buildroot}%{_bindir}/{mysql_client_test,mysqltest} +rm %{buildroot}%{_bindir}/{mariadb-client-test,mariadb-test} +rm %{buildroot}%{_mandir}/man1/{mysql_client_test,mysqltest,my_safe_process}.1* +rm %{buildroot}%{_mandir}/man1/{mariadb-client-test,mariadb-test}.1* +rm %{buildroot}%{_mandir}/man1/{mysql-test-run,mysql-stress-test}.pl.1* +rm %{buildroot}/suite/plugins/pam/mariadb_mtr +rm %{buildroot}/suite/plugins/pam/pam_mariadb_mtr.so +%endif + +%if %{without galera} +rm %{buildroot}%{_sysconfdir}/my.cnf.d/galera.cnf +rm %{buildroot}%{_sysconfdir}/sysconfig/clustercheck +rm %{buildroot}%{_bindir}/{clustercheck,galera_new_cluster} +rm %{buildroot}%{_bindir}/galera_recovery +rm %{buildroot}%{_datadir}/%{pkg_name}/systemd/use_galera_new_cluster.conf +%endif + +%if %{without rocksdb} +rm %{buildroot}%{_mandir}/man1/{mysql_,mariadb-}ldb.1* +rm %{buildroot}%{_mandir}/man1/myrocks_hotbackup.1* +%endif + +%if 0%{?scl:1} +# generate a configuration file for daemon +cat << EOF | tee -a %{buildroot}%{?_scl_scripts}/service-environment +# Services are started in a fresh environment without any influence of user's +# environment (like environment variable values). As a consequence, +# information of all enabled collections will be lost during service start up. +# If user needs to run a service under any software collection enabled, this +# collection has to be written into %{scl_upper}_SCLS_ENABLED variable +# in %{?_scl_scripts}/service-environment. +%{scl_upper}_SCLS_ENABLED="%{scl}" +EOF + +# clear *.lst files, so it the spec works with --short-circuit RPM option +# otherwise we'd have the content repeated +rm -f *.lst + +# Creating syspath without prefix for mariadb-config package +%scl_syspaths_install_wrapper -n mariadb-config -m link %{_sysconfdir}/my.cnf %{_root_sysconfdir}/%{scl_prefix}my.cnf +%scl_syspaths_install_wrapper -n mariadb-config -m link %{_sysconfdir}/my.cnf.d %{_root_sysconfdir}/%{scl_prefix}my.cnf.d + +# Creating syspath without prefix for mariadb package +mariadb_binaries='msql2mysql my_print_defaults mysql mysql_find_rows mysql_plugin +mysql_waitpid mysqlaccess mysqladmin mysqlbinlog mysqlcheck mysqldump +mysqlimport mysqlshow mysqlslap' + +%scl_syspaths_install_wrappers -n mariadb -m script -p bin $mariadb_binaries + +mans= ; for bin in $mariadb_binaries; do mans+=" man1/$bin.1.gz" ; done +%scl_syspaths_install_wrappers -n mariadb -m link -p man $mans + + +# Creating syspath without prefix for mariadb-server package +mariadb_server_binaries='aria_chk aria_dump_log aria_ftdump aria_pack +aria_read_log innochecksum myisam_ftdump myisamchk myisamlog +myisampack mysql_install_db mysql_secure_installation mysql_tzinfo_to_sql mysql_upgrade +mysqld_safe mysqld_safe_helper replace resolve_stack_dump resolveip +wsrep_sst_common wsrep_sst_mysqldump wsrep_sst_rsync' + +mariadb_backup_binaries_no_man='wsrep_sst_mariabackup mariabackup mbstream' + +%scl_syspaths_install_wrappers -n mariadb-server -m script -p bin $mariadb_server_binaries +%scl_syspaths_install_wrappers -n mariadb-backup -m script -p bin $mariadb_backup_binaries_no_man + +mans= ; for bin in $mariadb_server_binaries; do mans+=" man1/$bin.1.gz" ; done +%scl_syspaths_install_wrappers -n mariadb-server -m link -p man $mans + +%scl_syspaths_install_wrapper -n mariadb-server -m link %{logfiledir} %{_root_localstatedir}/log/%{scl_prefix}mariadb +%scl_syspaths_install_wrapper -n mariadb-server -m link %{dbdatadir} %{_root_localstatedir}/lib/%{scl_prefix}mysql + +%scl_syspaths_install_wrapper -n mariadb-server -m link %{_unitdir}/%{daemon_name}.service %{_unitdir}/%{daemon_no_prefix}.service +%scl_syspaths_install_wrapper -n mariadb-server -m link %{_unitdir}/%{daemon_name}@.service %{_unitdir}/%{daemon_no_prefix}@.service + +# Creating syspath without prefix for mariadb-server-utils package +mariadb_server_utils_binaries=' +mysql_convert_table_format mysql_fix_extensions mysql_setpermission +mysqldumpslow mysqld_multi mysqlhotcopy mysqltest perror' + +%scl_syspaths_install_wrappers -n mariadb-server-utils -m script -p bin $mariadb_server_utils_binaries + +mans= ; for bin in $mariadb_server_utils_binaries; do mans+=" man1/$bin.1.gz" ; done +%scl_syspaths_install_wrappers -n mariadb-server-utils -m link -p man $mans + +# Creating syspath without prefix for mariadb-server-galera package +mariadb_server_galera_binaries='galera_new_cluster' +mariadb_server_galera_binaries+=' galera_recovery' +mariadb_server_galera_binaries_no_man='clustercheck' + +%scl_syspaths_install_wrappers -n mariadb-server-galera -m script -p bin $mariadb_server_galera_binaries +%scl_syspaths_install_wrappers -n mariadb-server-galera -m script -p bin $mariadb_server_galera_binaries_no_man + +mans= ; for bin in $mariadb_server_galera_binaries; do mans+=" man1/$bin.1.gz" ; done +%scl_syspaths_install_wrappers -n mariadb-server-galera -m link -p man $mans + +%endif #scl + +%check +%if %{with test} +%if %runselftest +%{?scl:scl enable %{scl} %{?dts} - << "EOF"} +set -ex +# hack to let 32- and 64-bit tests run concurrently on same build machine +export MTR_PARALLEL=1 +# Builds might happen at the same host, avoid collision +# The port used is calculated as 20 * MTR_BUILD_THREAD + 10000 +# The resulting port must be between 5000 and 32767 +# This is the same as using option "--build-thread" for the "mysql-test-run.pl" +export MTR_BUILD_THREAD=$(( $(date +%s) % 1100 )) + +# The cmake build scripts don't provide any simple way to control the +# options for mysql-test-run, so ignore the make target and just call it +# manually. Nonstandard options chosen are: +# --force to continue tests after a failure +# no retries please +# test SSL with --ssl +# skip tests that are listed in rh-skipped-tests.list +# avoid redundant test runs with --binlog-format=mixed +# increase timeouts to prevent unwanted failures during mass rebuilds + +# Usefull arguments: +# --do-test=mysql_client_test_nonblock \ +# --skip-rpl +# --suite=roles +# --mem for running in the RAM; Not enough space in KOJI for this + +( + set -ex + cd %{buildroot}%{_datadir}/mysql-test + + export common_testsuite_arguments=" --parallel=auto --force --retry=2 --suite-timeout=900 --testcase-timeout=30 --mysqld=--binlog-format=mixed --force-restart --shutdown-timeout=60 --max-test-fail=5 --mem" + + # If full testsuite has already been run on this version and we don't explicitly want the full testsuite to be run + if [[ "%{last_tested_version}" == "%{version}" ]] && [[ %{force_run_testsuite} -eq 0 ]] + then + # in further rebuilds only run the basic "main" suite (~800 tests) + echo "running only base testsuite" + perl ./mysql-test-run.pl $common_testsuite_arguments --ssl --suite=main --mem --skip-test-list=unstable-tests + fi + + # If either this version wasn't marked as tested yet or I explicitly want to run the testsuite, run everything we have (~4000 test) + if [[ "%{last_tested_version}" != "%{version}" ]] || [[ %{force_run_testsuite} -ne 0 ]] + then + echo "running advanced testsuite" + perl ./mysql-test-run.pl $common_testsuite_arguments --ssl --skip-test=spider \ + %if %{ignore_testsuite_result} + --max-test-fail=9999 || : + %else + --skip-test-list=unstable-tests + %endif + # Second run for the SPIDER suites that fail with SCA (ssl self signed certificate) + perl ./mysql-test-run.pl $common_testsuite_arguments --skip-ssl --big-test --mem --suite=spider,spider/bg,spider/bugfix,spider/handler \ + %if %{ignore_testsuite_result} + --max-test-fail=999 || : + %endif + # blank line + fi + + # There might be a dangling symlink left from the testing, remove it to not be installed + rm -rf ./var +) + +# NOTE: the Spider SE has 2 more hidden testsuites "oracle" and "oracle2". +# however, all of the tests fail with: "failed: 12521: Can't use wrapper 'oracle' for SQL connection" + +%{?scl:EOF} +%endif +%endif + + + +%pre server +/usr/sbin/groupadd -g 27 -o -r mysql >/dev/null 2>&1 || : +/usr/sbin/useradd -M -N -g mysql -o -r -d %{mysqluserhome} -s /sbin/nologin \ + -c "MySQL Server" -u 27 mysql >/dev/null 2>&1 || : + +%if %{with galera} +%post server-galera +# Allow ports needed for the replication: +# https://mariadb.com/kb/en/library/configuring-mariadb-galera-cluster/#network-ports +# Galera Replication Port +semanage port -a -t mysqld_port_t -p tcp 4567 >/dev/null 2>&1 || : +semanage port -a -t mysqld_port_t -p udp 4567 >/dev/null 2>&1 || : +# IST Port +semanage port -a -t mysqld_port_t -p tcp 4568 >/dev/null 2>&1 || : +# SST Port +semanage port -a -t mysqld_port_t -p tcp 4444 >/dev/null 2>&1 || : + +semodule -i %{_datadir}/selinux/packages/%{name}/%{name}-server-galera.pp >/dev/null 2>&1 || : +%endif + +%post server +%if 0%{?scl:1} +semanage fcontext -a -e "%{se_daemon_source}" "%{_unitdir}/%{daemon_name}.service" >/dev/null 2>&1 || : +semanage fcontext -a -t mysqld_var_run_t "%{pidfiledir}" >/dev/null 2>&1 || : +# work-around for rhbz#1172683 +semanage fcontext -a -t mysqld_exec_t %{_root_libexecdir}/mysqld-scl-helper >/dev/null 2>&1 || : +# work-around for rhbz#1464803 +semanage fcontext -a -t mysqld_exec_t %{_root_bindir}/mysqld_safe_helper >/dev/null 2>&1 || : +# mysqld is now a symlink to mariadbd, mysql_upgrade a symlink to mariadb-upgrade +semanage fcontext -a -t mysqld_exec_t %{_root_libexecdir}/mariadbd +semanage fcontext -a -t mysqld_exec_t %{_root_bindir}/mariadb-upgrade +selinuxenabled && load_policy || : +restorecon -R "%{?_scl_root}/" >/dev/null 2>&1 || : +restorecon -R "%{_sysconfdir}" >/dev/null 2>&1 || : +restorecon -R "%{_localstatedir}" >/dev/null 2>&1 || : +restorecon -R "%{_unitdir}/%{daemon_name}.service" >/dev/null 2>&1 || : +restorecon -R "%{pidfiledir}" >/dev/null 2>&1 || : +%endif +%systemd_post %{daemon_name}.service + +%preun server +%systemd_preun %{daemon_name}.service + +%if %{with galera} +%postun server-galera +if [ $1 -eq 0 ]; then + semodule -r %{name}-server-galera 2>/dev/null || : +fi +%endif + +%postun server +%systemd_postun_with_restart %{daemon_name}.service + + + +%if %{with client} +%files +%{_bindir}/msql2mysql +%{_bindir}/mysql +%{_bindir}/mariadb +%{_bindir}/mysqlaccess +%{_bindir}/mysqladmin +%{_bindir}/mysqlbinlog +%{_bindir}/mysqlcheck +%{_bindir}/mysqldump +%{_bindir}/mysql_find_rows +%{_bindir}/mysqlimport +%{_bindir}/mysql_plugin +%{_bindir}/mysqlshow +%{_bindir}/mysqlslap +%{_bindir}/mysql_waitpid +%{_bindir}/mariadb-access +%{_bindir}/mariadb-admin +%{_bindir}/mariadb-binlog +%{_bindir}/mariadb-check +%{_bindir}/mariadb-dump +%{_bindir}/mariadb-find-rows +%{_bindir}/mariadb-import +%{_bindir}/mariadb-plugin +%{_bindir}/mariadb-show +%{_bindir}/mariadb-slap +%{_bindir}/mariadb-waitpid + +%{_mandir}/man1/msql2mysql.1* +%{_mandir}/man1/mysql.1* +%{_mandir}/man1/mariadb.1* +%{_mandir}/man1/mysqlaccess.1* +%{_mandir}/man1/mysqladmin.1* +%{_mandir}/man1/mysqlbinlog.1* +%{_mandir}/man1/mysqlcheck.1* +%{_mandir}/man1/mysqldump.1* +%{_mandir}/man1/mysql_find_rows.1* +%{_mandir}/man1/mysqlimport.1* +%{_mandir}/man1/mysql_plugin.1* +%{_mandir}/man1/mysqlshow.1* +%{_mandir}/man1/mysqlslap.1* +%{_mandir}/man1/mysql_waitpid.1* +%{_mandir}/man1/mariadb-access.1* +%{_mandir}/man1/mariadb-admin.1* +%{_mandir}/man1/mariadb-binlog.1* +%{_mandir}/man1/mariadb-check.1* +%{_mandir}/man1/mariadb-dump.1* +%{_mandir}/man1/mariadb-find-rows.1* +%{_mandir}/man1/mariadb-import.1* +%{_mandir}/man1/mariadb-plugin.1* +%{_mandir}/man1/mariadb-show.1* +%{_mandir}/man1/mariadb-slap.1* +%{_mandir}/man1/mariadb-waitpid.1* + +%config(noreplace) %{_sysconfdir}/my.cnf.d/mysql-clients.cnf + +# Client plugins +%if 0%{?scl:1} +%{_libdir}/%{pkg_name}/plugin/dialog.so +%{_libdir}/%{pkg_name}/plugin/mysql_clear_password.so +%{_libdir}/%{pkg_name}/plugin/sha256_password.so +%{_libdir}/%{pkg_name}/plugin/auth_gssapi_client.so +%endif + +%endif + +%if %{with clibrary} +%files libs +#%exclude %{_libdir}/libmysqlclient.so.18 +%exclude %{_libdir}/libmariadb.so +%exclude %{_libdir}/libmysqlclient.so +%exclude %{_libdir}/libmysqlclient_r.so +%{_libdir}/libmariadb.so* +%config(noreplace) %{_sysconfdir}/my.cnf.d/client.cnf +%endif + +%if %{with config} +%files config +# although the default my.cnf contains only server settings, we put it in the +# common package because it can be used for client settings too. +%dir %{_sysconfdir}/my.cnf.d +%config(noreplace) %{_sysconfdir}/my.cnf +%endif + +%if %{with common} +%files common +%doc %{_datadir}/doc/%{_pkgdocdirname} +%dir %{_datadir}/%{pkg_name} +%{_datadir}/%{pkg_name}/charsets +%if %{with clibrary} +%{_libdir}/%{pkg_name}/plugin/dialog.so +%{_libdir}/%{pkg_name}/plugin/mysql_clear_password.so +%endif +%endif + +%if %{with errmsg} +%files errmsg +%{_datadir}/%{pkg_name}/errmsg-utf8.txt +%{_datadir}/%{pkg_name}/english +%lang(cs) %{_datadir}/%{pkg_name}/czech +%lang(da) %{_datadir}/%{pkg_name}/danish +%lang(nl) %{_datadir}/%{pkg_name}/dutch +%lang(et) %{_datadir}/%{pkg_name}/estonian +%lang(fr) %{_datadir}/%{pkg_name}/french +%lang(de) %{_datadir}/%{pkg_name}/german +%lang(el) %{_datadir}/%{pkg_name}/greek +%lang(hi) %{_datadir}/%{pkg_name}/hindi +%lang(hu) %{_datadir}/%{pkg_name}/hungarian +%lang(it) %{_datadir}/%{pkg_name}/italian +%lang(ja) %{_datadir}/%{pkg_name}/japanese +%lang(ko) %{_datadir}/%{pkg_name}/korean +%lang(no) %{_datadir}/%{pkg_name}/norwegian +%lang(no) %{_datadir}/%{pkg_name}/norwegian-ny +%lang(pl) %{_datadir}/%{pkg_name}/polish +%lang(pt) %{_datadir}/%{pkg_name}/portuguese +%lang(ro) %{_datadir}/%{pkg_name}/romanian +%lang(ru) %{_datadir}/%{pkg_name}/russian +%lang(sr) %{_datadir}/%{pkg_name}/serbian +%lang(sk) %{_datadir}/%{pkg_name}/slovak +%lang(es) %{_datadir}/%{pkg_name}/spanish +%lang(sv) %{_datadir}/%{pkg_name}/swedish +%lang(uk) %{_datadir}/%{pkg_name}/ukrainian +%endif + +%if %{with galera} +%files server-galera +#%doc Docs/README-wsrep +#%license LICENSE.clustercheck +%{_bindir}/clustercheck +%{_bindir}/galera_new_cluster +%{_bindir}/galera_recovery +%{_datadir}/%{pkg_name}/systemd/use_galera_new_cluster.conf +%config(noreplace) %{_sysconfdir}/my.cnf.d/galera.cnf +%attr(0640,root,root) %ghost %config(noreplace) %{_sysconfdir}/sysconfig/clustercheck +%{_datadir}/selinux/packages/%{name}/%{name}-server-galera.pp +%endif + +%files server +%doc README.wsrep_sst_rsync_tunnel + +%{_bindir}/aria_chk +%{_bindir}/aria_dump_log +%{_bindir}/aria_ftdump +%{_bindir}/aria_pack +%{_bindir}/aria_read_log +%{_bindir}/mariadb-service-convert +%{_bindir}/myisamchk +%{_bindir}/myisam_ftdump +%{_bindir}/myisamlog +%{_bindir}/myisampack +%{_bindir}/my_print_defaults + +%{_bindir}/mariadb-conv + +%{_bindir}/mysql_install_db +%{_bindir}/mysql_secure_installation +%{_bindir}/mysql_tzinfo_to_sql +%{_bindir}/mariadb-install-db +%{_bindir}/mariadb-secure-installation +%{_bindir}/mariadb-tzinfo-to-sql +%{_bindir}/mysqld_safe +%{_bindir}/mariadbd-safe +%{_bindir}/mysqld_safe_helper +%{_bindir}/mariadbd-safe-helper + +%{_bindir}/innochecksum +%{_bindir}/replace +%{_bindir}/resolve_stack_dump +%{_bindir}/resolveip +# wsrep_sst_common should be moved to /usr/share/mariadb: https://jira.mariadb.org/browse/MDEV-14296 +%{_bindir}/wsrep_* + +%config(noreplace) %{_sysconfdir}/my.cnf.d/%{pkg_name}-server.cnf +%config(noreplace) %{_sysconfdir}/my.cnf.d/enable_encryption.preset +%config(noreplace) %{_sysconfdir}/my.cnf.d/spider.cnf + +%{_libexecdir}/mysqld +%{_libexecdir}/mariadbd +%{_sbindir}/mysqld +%{_sbindir}/mariadbd + +%if 0%{?scl:1} +%{_libexecdir}/mysqld-scl-helper +%endif + +%{_libdir}/%{pkg_name}/INFO_SRC +%{_libdir}/%{pkg_name}/INFO_BIN +%if %{without common} +%dir %{_datadir}/%{pkg_name} +%endif + +%dir %{_libdir}/%{pkg_name} +%dir %{_libdir}/%{pkg_name}/plugin +%{_libdir}/%{pkg_name}/plugin/* +%{?with_oqgraph:%exclude %{_libdir}/%{pkg_name}/plugin/ha_oqgraph.so} +%{?with_connect:%exclude %{_libdir}/%{pkg_name}/plugin/ha_connect.so} +%{?with_cracklib:%exclude %{_libdir}/%{pkg_name}/plugin/cracklib_password_check.so} +%{?with_rocksdb:%exclude %{_libdir}/%{pkg_name}/plugin/ha_rocksdb.so} +%{?with_tokudb:%exclude %{_libdir}/%{pkg_name}/plugin/ha_tokudb.so} +%{?with_gssapi:%exclude %{_libdir}/%{pkg_name}/plugin/auth_gssapi.so} +%{?with_sphinx:%exclude %{_libdir}/%{pkg_name}/plugin/ha_sphinx.so} +# Client plugins +%if 0%{?scl:1} +%exclude %{_libdir}/%{pkg_name}/plugin/dialog.so +%exclude %{_libdir}/%{pkg_name}/plugin/mysql_clear_password.so +%exclude %{_libdir}/%{pkg_name}/plugin/sha256_password.so +%exclude %{_libdir}/%{pkg_name}/plugin/auth_gssapi_client.so +%else +%if %{with clibrary} +%exclude %{_libdir}/%{pkg_name}/plugin/dialog.so +%exclude %{_libdir}/%{pkg_name}/plugin/mysql_clear_password.so +%endif +%endif + +# PAM plugin; moved to a standalone sub-package +%exclude %{_libdir}/%{pkg_name}/plugin/auth_pam.so +%exclude %{_libdir}/%{pkg_name}/plugin/auth_pam_v1.so +%exclude %dir %{_libdir}/%{pkg_name}/plugin/auth_pam_tool_dir +%exclude %{_libdir}/%{pkg_name}/plugin/auth_pam_tool_dir/auth_pam_tool + +%{_mandir}/man1/aria_chk.1* +%{_mandir}/man1/aria_dump_log.1* +%{_mandir}/man1/aria_ftdump.1* +%{_mandir}/man1/aria_pack.1* +%{_mandir}/man1/aria_read_log.1* +%{_mandir}/man1/aria_s3_copy.1* +%{_mandir}/man1/galera_new_cluster.1* +%{_mandir}/man1/galera_recovery.1* +%{_mandir}/man1/mariadb-service-convert.1* +%{_mandir}/man1/myisamchk.1* +%{_mandir}/man1/myisamlog.1* +%{_mandir}/man1/myisampack.1* +%{_mandir}/man1/myisam_ftdump.1* +%{_mandir}/man1/my_print_defaults.1* + +%{_mandir}/man1/mariadb-conv.1* + +%{_mandir}/man1/mysql_install_db.1* +%{_mandir}/man1/mysql_secure_installation.1* +%{_mandir}/man1/mysql_tzinfo_to_sql.1* +%{_mandir}/man1/mariadb-install-db.1* +%{_mandir}/man1/mariadb-secure-installation.1* +%{_mandir}/man1/mariadb-tzinfo-to-sql.1* +%{_mandir}/man1/mysqld_safe.1* +%{_mandir}/man1/mariadbd-safe.1* +%{_mandir}/man1/mysqld_safe_helper.1* +%{_mandir}/man1/mariadbd-safe-helper.1* + +%{_mandir}/man1/innochecksum.1* +%{_mandir}/man1/replace.1* +%{_mandir}/man1/resolveip.1* +%{_mandir}/man1/resolve_stack_dump.1* +%{_mandir}/man8/mysqld.8* +%{_mandir}/man8/mariadbd.8* +%{_mandir}/man1/wsrep_*.1* + +%{_mandir}/man1/mysql.server.1* + +%{_datadir}/%{pkg_name}/fill_help_tables.sql +%{_datadir}/%{pkg_name}/maria_add_gis_sp.sql +%{_datadir}/%{pkg_name}/maria_add_gis_sp_bootstrap.sql +%{_datadir}/%{pkg_name}/mysql_system_tables.sql +%{_datadir}/%{pkg_name}/mysql_system_tables_data.sql +%{_datadir}/%{pkg_name}/mysql_test_data_timezone.sql +%{_datadir}/%{pkg_name}/mysql_to_mariadb.sql +%{_datadir}/%{pkg_name}/mysql_performance_tables.sql +%{_datadir}/%{pkg_name}/mysql_test_db.sql +%if %{with mroonga} +%{_datadir}/%{pkg_name}/mroonga/install.sql +%{_datadir}/%{pkg_name}/mroonga/uninstall.sql +%license %{_datadir}/%{pkg_name}/mroonga/COPYING +%license %{_datadir}/%{pkg_name}/mroonga/AUTHORS +%license %{_datadir}/%{name}-server/groonga-normalizer-mysql/lgpl-2.0.txt +%license %{_datadir}/%{name}-server/groonga/COPYING +%doc %{_datadir}/%{name}-server/groonga-normalizer-mysql/README.md +%doc %{_datadir}/%{name}-server/groonga/README.md +%endif +%if %{with galera} +%{_datadir}/%{pkg_name}/wsrep.cnf +%endif +%{_datadir}/%{pkg_name}/wsrep_notify +%dir %{_datadir}/%{pkg_name}/policy +%dir %{_datadir}/%{pkg_name}/policy/selinux +%{_datadir}/%{pkg_name}/policy/selinux/README +%{_datadir}/%{pkg_name}/policy/selinux/mariadb-server.* +%{_datadir}/%{pkg_name}/policy/selinux/mariadb.* +%{_datadir}/%{pkg_name}/systemd/mariadb.service +# mariadb@ is installed only when we have cmake newer than 3.3 +%if 0%{?fedora} || 0%{?rhel} > 7 +%{_datadir}/%{pkg_name}/systemd/mariadb@.service +%endif + +%{_unitdir}/%{daemon_name}* +%{_libexecdir}/mysql-prepare-db-dir +%{_libexecdir}/mysql-check-socket +%{_libexecdir}/mysql-check-upgrade +%{_libexecdir}/mysql-scripts-common + +%attr(0755,mysql,mysql) %dir %{pidfiledir} +%attr(0755,mysql,mysql) %dir %{dbdatadir} +%attr(0750,mysql,mysql) %dir %{logfiledir} +%{?scl:%attr(0755,mysql,mysql) %dir /var/lib/mysql} +# This does what it should. +# RPMLint error "conffile-without-noreplace-flag /var/log/mariadb/mariadb.log" is false positive. +%attr(0640,mysql,mysql) %config %ghost %verify(not md5 size mtime) %{logfile} +%config(noreplace) %{logrotateddir}/%{daemon_name} + +%{?scl:%config(noreplace) %{?_scl_scripts}/service-environment} + +%{_tmpfilesdir}/%{name}.conf +%{_sysusersdir}/%{name}.conf + +%if %{with cracklib} +%files cracklib-password-check +%config(noreplace) %{_sysconfdir}/my.cnf.d/cracklib_password_check.cnf +%{_libdir}/%{pkg_name}/plugin/cracklib_password_check.so +%endif + +%if %{with backup} +%files backup +%{_bindir}/mariabackup +%{_bindir}/mariadb-backup +%{_bindir}/mbstream +%{_mandir}/man1/mariabackup.1* +%{_mandir}/man1/mariadb-backup.1* +%{_mandir}/man1/mbstream.1* +%endif + +%if %{with rocksdb} +%files rocksdb-engine +%config(noreplace) %{_sysconfdir}/my.cnf.d/rocksdb.cnf +%{_bindir}/myrocks_hotbackup +%{_bindir}/mysql_ldb +%{_bindir}/mariadb-ldb +%{_bindir}/sst_dump +%{_libdir}/%{pkg_name}/plugin/ha_rocksdb.so +%{_mandir}/man1/mysql_ldb.1* +%{_mandir}/man1/mariadb-ldb.1* +%{_mandir}/man1/myrocks_hotbackup.1* +%endif + +%if %{with tokudb} +%files tokudb-engine +%{_bindir}/tokuftdump +%{_bindir}/tokuft_logprint +%{_mandir}/man1/tokuftdump.1* +%{_mandir}/man1/tokuft_logprint.1* +%config(noreplace) %{_sysconfdir}/my.cnf.d/tokudb.cnf +%{_libdir}/%{pkg_name}/plugin/ha_tokudb.so +%{_unitdir}/mariadb.service.d/tokudb.conf +%endif + +%if %{with gssapi} +%files gssapi-server +%{_libdir}/%{pkg_name}/plugin/auth_gssapi.so +%config(noreplace) %{_sysconfdir}/my.cnf.d/auth_gssapi.cnf +%endif + +%if %{with pam} +%files pam +%{_libdir}/%{pkg_name}/plugin/auth_pam.so +%{_libdir}/%{pkg_name}/plugin/auth_pam_v1.so +%attr(0755,root,root) %dir %{_libdir}/%{pkg_name}/plugin/auth_pam_tool_dir +# SUID-to-root binary. Access MUST be restricted (https://jira.mariadb.org/browse/MDEV-25126) +%attr(4750,root,mysql) %{_libdir}/%{pkg_name}/plugin/auth_pam_tool_dir/auth_pam_tool +%{_libdir}/security/pam_user_map.so +%{_sysconfdir}/security/user_map.conf +%endif + +%if %{with sphinx} +%files sphinx-engine +%{_libdir}/%{pkg_name}/plugin/ha_sphinx.so +%endif + +%if %{with oqgraph} +%files oqgraph-engine +%config(noreplace) %{_sysconfdir}/my.cnf.d/oqgraph.cnf +%{_libdir}/%{pkg_name}/plugin/ha_oqgraph.so +%endif + +%if %{with connect} +%files connect-engine +%config(noreplace) %{_sysconfdir}/my.cnf.d/connect.cnf +%{_libdir}/%{pkg_name}/plugin/ha_connect.so +%endif + +%files server-utils +# Perl utilities +%{_bindir}/mysql_convert_table_format +%{_bindir}/mysqldumpslow +%{_bindir}/mysql_fix_extensions +%{_bindir}/mysqlhotcopy +%{_bindir}/mysql_setpermission +%{_bindir}/mariadb-convert-table-format +%{_bindir}/mariadb-dumpslow +%{_bindir}/mariadb-fix-extensions +%{_bindir}/mariadb-hotcopy +%{_bindir}/mariadb-setpermission +%{_bindir}/mysqld_multi +%{_bindir}/mariadbd-multi + +%{_mandir}/man1/mysql_convert_table_format.1* +%{_mandir}/man1/mysqldumpslow.1* +%{_mandir}/man1/mysql_fix_extensions.1* +%{_mandir}/man1/mysqlhotcopy.1* +%{_mandir}/man1/mysql_setpermission.1* +%{_mandir}/man1/mariadb-convert-table-format.1* +%{_mandir}/man1/mariadb-dumpslow.1* +%{_mandir}/man1/mariadb-fix-extensions.1* +%{_mandir}/man1/mariadb-hotcopy.1* +%{_mandir}/man1/mariadb-setpermission.1* +%{_mandir}/man1/mysqld_multi.1* +%{_mandir}/man1/mariadbd-multi.1* + +# Utilities that can be used remotely +%{_bindir}/mysql_upgrade +%{_bindir}/mariadb-upgrade +%{_bindir}/perror +%{_mandir}/man1/mysql_upgrade.1* +%{_mandir}/man1/mariadb-upgrade.1* +%{_mandir}/man1/perror.1* + +%if %{with devel} +%files devel +%{_includedir}/* +%{_datadir}/aclocal/mysql.m4 +%{_libdir}/pkgconfig/*mariadb.pc +%if %{with clibrary} +#%{_libdir}/libmysqlclient.so.18 +%{_bindir}/mysql_config* +%{_bindir}/mariadb_config* +%{_bindir}/mariadb-config +%{_libdir}/libmariadb.so +%{_libdir}/libmysqlclient.so +%{_libdir}/libmysqlclient_r.so +%{_mandir}/man1/mysql_config* +%endif +%endif + +%if %{with embedded} +%files embedded +%{_libdir}/libmariadbd.so.* + +%files embedded-devel +%{_libdir}/libmysqld.so +%{_libdir}/libmariadbd.so +%endif + +%if %{with test} +%files test +%if %{with embedded} +%{_bindir}/test-connect-t +%{_bindir}/mysql_client_test_embedded +%{_bindir}/mysqltest_embedded +%{_bindir}/mariadb-client-test-embedded +%{_bindir}/mariadb-test-embedded +%{_mandir}/man1/mysql_client_test_embedded.1* +%{_mandir}/man1/mysqltest_embedded.1* +%{_mandir}/man1/mariadb-client-test-embedded.1* +%{_mandir}/man1/mariadb-test-embedded.1* +%endif +%{_bindir}/mysql_client_test +%{_bindir}/mysqltest +%{_bindir}/mariadb-client-test +%{_bindir}/mariadb-test +%{_bindir}/my_safe_process +%attr(-,mysql,mysql) %{_datadir}/mysql-test +%{_mandir}/man1/mysql_client_test.1* +%{_mandir}/man1/mysqltest.1* +%{_mandir}/man1/mariadb-client-test.1* +%{_mandir}/man1/mariadb-test.1* +%{_mandir}/man1/my_safe_process.1* +%{_mandir}/man1/mysql-stress-test.pl.1* +%{_mandir}/man1/mysql-test-run.pl.1* +%endif + +%if 0%{?scl:1} +%scl_syspaths_files -n mariadb +%scl_syspaths_files -n mariadb-config +%scl_syspaths_files -n mariadb-backup +%scl_syspaths_files -n mariadb-server +%scl_syspaths_files -n mariadb-server-utils +%scl_syspaths_files -n mariadb-server-galera +%endif + +%changelog +* Mon May 10 2021 Michal Schorm - 10.5.9-2 +- Modify the upstream sources + +* Fri Mar 26 2021 Michal Schorm - 10.5.9-1 +- Rebase to 10.5.9 + +* Wed Dec 09 2020 Honza Horak +- SCLize the package + +* Wed Nov 11 2020 Michal Schorm - 10.5.8-1 +- Rebase to 10.5.8 + +* Fri Nov 06 2020 Michal Schorm - 10.5.7-1 +- Rebase to 10.5.7 + +* Mon Sep 21 2020 Lukas Javorsky - 10.5.5-1 +- Rebase to 10.5.5 +- Fix mariadb-ownsetup +- Add manual for aria_s3_copy + +* Wed Sep 16 2020 Lukas Javorsky - 10.5.4-1 +- Rebase to 10.5.4 +- Add spider.cnf to the server config files + +* Mon Sep 14 2020 Lukas Javorsky - 10.5.3-1 +- Rebase to 10.5.3 + +* Fri Sep 11 2020 Michal Schorm - 10.5.2-1 +- Test rebase to 10.5.2 - Beta +- TokuDB SE has been deprecated + +* Thu Sep 10 2020 Michal Schorm - 10.5.1-1 +- Test rebase to 10.5.1 - Beta + +* Thu Sep 10 2020 Michal Schorm - 10.5.0-1 +- Test rebase to 10.5.0 - Alpha + +* Sun Sep 06 2020 Michal Schorm - 10.4.14-3 +- Resolves: #1851605 + +* Thu Sep 03 2020 Michal Schorm - 10.4.14-2 +- Resolves: #1873999, #1874446 + +* Thu Aug 20 2020 Michal Schorm - 10.4.14-1 +- Rebase to 10.4.14 + +* Tue Aug 18 2020 Michal Schorm - 10.4.13-7 +- Do CMake out-of-source builds +- Force the CMake change regarding the in-source builds also to F31 and F32 +- Use CMake macros instead of cmake & make direct commands +- %%cmake macro covers the %%{set_build_flags}, so they are not needed + Other changes to compile flags must be specified *after* the %%cmake macro + +* Wed Aug 05 2020 Jeff Law - 3:10.4.13-6 +- Disable LTO + +* Sat Aug 01 2020 Fedora Release Engineering - 3:10.4.13-5 +- Second attempt - Rebuilt for + https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild + +* Tue Jul 28 2020 Fedora Release Engineering - 3:10.4.13-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild + +* Tue Jul 14 2020 Michal Schorm - 10.4.13-3 +- Make conflicts between corresponding mariadb and mysql packages explicit +- Get rid of the Conflicts macro, it was intended to mark conflicts with + *upstream* packages + +* Fri Jun 05 2020 Michal Schorm - 10.4.13-2 +- Extend Perl "Requires" filtering to wsrep + Resolves: #1845376 + +* Fri Jun 05 2020 Michal Schorm - 10.4.13-1 +- Rebase to 10.4.13 + +* Sun May 24 2020 Lukas Javorsky - 3:10.4.12-6 +- Remove mariadb_rpl.h from includedir to prevent conflict with connector-c's libraries + +* Thu Apr 02 2020 Björn Esser - 3:10.4.12-5 +- Fix string quoting for rpm >= 4.16 + +* Thu Mar 26 2020 Jitka Plesnikova - 10.4.12-4 +- Add perl dependencies needed for tests + +* Mon Mar 16 2020 Michal Schorm - 10.4.12-3 +- Rebase mariadb-connector-c git submodule to commit fbf1db6 + For fix: https://jira.mariadb.org/browse/CONC-441 + +* Tue Mar 10 2020 Michal Schorm - 10.4.12-2 +- Update the fix for building in the debug mode + +* Thu Feb 06 2020 Michal Schorm - 10.4.12-1 +- Rebase to 10.4.12 + +* Wed Jan 29 2020 Fedora Release Engineering - 3:10.4.11-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild + +* Fri Jan 17 2020 Michal Schorm - 10.4.11-1 +- Rebase to 10.4.11 + Related: #1756468 +- Remove 'bench' subpackage. Upstream no longer maintains it. +- Use Valgrind for debug builds +- Remove ancient obsoletions +- Tweak build flags +- Add patch for auth_pam_tool directory + +* Fri Jan 10 2020 Michal Schorm - 10.3.21-1 +- Rebase to 10.3.21 + +* Mon Nov 18 2019 Lukas Javorsky - 10.3.20-3 +- Change path of groonga's packaged files +- Fix bz#1763287 + +* Tue Nov 12 2019 Michal Schorm - 10.3.20-2 +- Rebuild on top fo new mariadb-connector-c + +* Mon Nov 11 2019 Michal Schorm - 10.3.20-1 +- Rebase to 10.3.20 + +* Wed Nov 06 2019 Michal Schorm - 10.3.19-1 +- Rebase to 10.3.19 + +* Thu Oct 31 2019 Carl George - 3:10.3.18-1 +- Rebase to 10.3.18 + +* Wed Sep 11 2019 Michal Schorm - 10.3.17-3 +- Disable building of the ed25519 client plugin. + From now on it will be shipped by 'mariadb-connector-c' package + +* Fri Sep 06 2019 Michal Schorm - 10.3.17-2 +- Fix the debug build + +* Thu Aug 01 2019 Michal Schorm - 10.3.17-1 +- Rebase to 10.3.17 + +* Thu Jul 25 2019 Fedora Release Engineering - 3:10.3.16-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild + +* Tue Jun 18 2019 Michal Schorm - 10.3.16-1 +- Rebase to 10.3.16 +- Added patch for armv7hl builds of spider SE + +* Tue Jun 11 2019 Michal Schorm - 10.3.15-1 +- Rebase to 10.3.15 +- CVEs fixed: + CVE-2019-2510 CVE-2019-2537 +- CVEs fixed: + CVE-2019-2614 CVE-2019-2627 CVE-2019-2628 + +* Tue Jun 11 2019 Michal Schorm - 10.3.12-15 +- Remove Cassandra subpackage; it is no longer developed + +* Thu Mar 21 2019 Michal Schorm - 10.3.12-14 +- Fix building of TokuDB with Jemalloc 5 +- Fix building with / without lz4 + +* Thu Mar 21 2019 Michal Schorm - 10.3.12-13 +- Add patch for mysqld_safe --dry-run + +* Wed Mar 20 2019 Michal Schorm - 10.3.12-12 +- Add patch for server pkgconfig file location + +* Sat Feb 23 2019 Pavel Raiskup - 10.3.12-11 +- conditionally depend on selinux-policy-targeted again (rhbz#1665643) + +* Mon Feb 11 2019 Michal Schorm - 3:10.3.12-10 +- Disable the requirement of mysql-selinux, until its bug is solved for good; #1665643 + +* Fri Feb 01 2019 Fedora Release Engineering - 3:10.3.12-9 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild + +* Wed Jan 30 2019 Honza Horak - 3:10.3.12-8 +- Fix several SSL tests that failed because of different SSL cipher expectation + +* Wed Jan 23 2019 Michal Schorm - 3:10.3.12-7 +- Fix TokuDB Jemalloc ld_preload + Resolves: #1668375 +- Tweak macros usage + +* Sat Jan 19 2019 Michal Schorm - 3:10.3.12-6 +- Enable mysql-selinux requirement +- Tweak the testsuite execution, speed up the testsuite on rebuilds +- Change weak dependency of RocksDB and TokuDB storage engines + from Recommends to Suggests +- Add "Suggests" weak dependencies to more storage engines + +* Wed Jan 16 2019 Michal Schorm - 3:10.3.12-5 +- Tweak handling of the mysql-selinux requirement, leave disabled due to #1665643 + +* Mon Jan 14 2019 Björn Esser - 3:10.3.12-4 +- Rebuilt for libcrypt.so.2 (#1666033) + +* Fri Jan 11 2019 Kevin Fenzi - 3:10.3.12-3 +- Drop mysql-selinux recommends for now due to bug #1665643 + +* Wed Jan 09 2019 Honza Horak - 3:10.3.12-2 +- Use specific python shebang + +* Tue Jan 08 2019 Michal Schorm - 3:10.3.12-1 +- Rebase to 10.3.12 +- Disable building of the caching_sha2_password plugin, it is shipped + by 'mariadb-connector-c' +- Remove libmariadb.pc, is it shipped by 'mariadb-connector-c' + +* Mon Dec 10 2018 Michal Schorm - 3:10.3.11-1 +- Rebase to 10.3.11 +- CVEs fixed: + CVE-2018-3282, CVE-2016-9843, CVE-2018-3174, CVE-2018-3143, CVE-2018-3156 + CVE-2018-3251, CVE-2018-3185, CVE-2018-3277, CVE-2018-3162, CVE-2018-3173 + CVE-2018-3200, CVE-2018-3284 + +* Fri Oct 05 2018 Michal Schorm - 3:10.3.10-1 +- Rebase to 10.3.10 + +* Tue Sep 04 2018 Michal Schorm - 3:10.3.9-2 +- Fix parallel installability of x86_64 and i686 devel packages + +* Mon Aug 20 2018 Michal Schorm - 3:10.3.9-1 +- Rebase to 10.3.9 + +* Fri Aug 10 2018 Petr Lautrbach - 3:10.3.8-5 +- Update mariadb-server-galera sub-package to require the correct package with /usr/sbin/semanage + +* Wed Jul 25 2018 Honza Horak - 3:10.3.8-4 +- Do not build config on systems where mariadb-connector-c-config exists instead + +* Tue Jul 17 2018 Honza Horak - 3:10.3.8-3 +- Move config files mysql-clients.cnf and enable_encryption.preset to correct + sub-packages, similar to what upstream does + +* Fri Jul 13 2018 Fedora Release Engineering - 3:10.3.8-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild + +* Tue Jul 03 2018 Michal Schorm - 3:10.3.8-1 +- Rebase to 10.3.8 +- Build TokuDB with jemalloc + +* Wed Jun 27 2018 Michal Schorm - 3:10.3.7-2 +- Rebase to 10.3.7 +- Remove the galera obsoletes + +* Tue Jun 05 2018 Honza Horak - 3:10.2.15-2 +- Use mysqladmin for checking the socket +- Jemalloc dependency moved to the TokuDB subpackage. + CMake jemalloc option removed, not used anymore. + The server doesn't need jemalloc since 10.2: https://jira.mariadb.org/browse/MDEV-11059 +- Build MariaDB with TokuDB without Jemalloc. + +* Wed May 23 2018 Michal Schorm - 3:10.2.15-1 +- Rebase to 10.2.15 +- CVEs fixed: #1568962 + CVE-2018-2755 CVE-2018-2761 CVE-2018-2766 CVE-2018-2771 CVE-2018-2781 + CVE-2018-2782 CVE-2018-2784 CVE-2018-2787 CVE-2018-2813 CVE-2018-2817 + CVE-2018-2819 CVE-2018-2786 CVE-2018-2759 CVE-2018-2777 CVE-2018-2810 + +* Thu Mar 29 2018 Michal Schorm - 3:10.2.14-1 +- Rebase to 10.2.14 +- Update testsuite run for SSL self signed certificates + +* Tue Mar 6 2018 Michal Schorm - 3:10.2.13-2 +- Further fix of ldconfig scriptlets for F27 +- Fix hardcoded paths, move unversioned libraries and symlinks to the devel subpackage + +* Thu Mar 1 2018 Michal Schorm - 3:10.2.13-1 +- Rebase to 10.2.13 + +* Mon Feb 26 2018 Michal Schorm - 3:10.2.12-8 +- SPECfile refresh, RHEL6, SySV init and old fedora stuff removed + +* Sun Feb 25 2018 Michal Schorm - 3:10.2.12-7 +- Rebuilt for ldconfig_post and ldconfig_postun bug + Related: #1548331 + +* Thu Feb 08 2018 Fedora Release Engineering - 3:10.2.12-6 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild + +* Fri Jan 26 2018 Michal Schorm - 3:10.2.12-5 +- Use '-ldl' compiler flag when associated library used + Resolves: #1538990 + +* Thu Jan 25 2018 Michal Schorm - 3:10.2.12-4 +- Fix the upgrade path. Build TokuDB subpackage again, but build a unsupported + configuration by upstream (without Jemalloc). + Jemmalloc has been updated to version 5, which isn't backwards compatible. +- Use downstream tmpfiles instead of the upstream one + Related: #1538066 + +* Sat Jan 20 2018 Björn Esser - 3:10.2.12-3 +- Rebuilt for switch to libxcrypt + +* Thu Jan 11 2018 Honza Horak - 3:10.2.12-1 +- Do not build connect plugin with mongo and jdbc connectors +- Support MYSQLD_OPTS and _WSREP_NEW_CLUSTER env vars in init script, + same as it is done in case of systemd unit file + Related: #1455850 +- Print the same messages as before when starting the service in SysV init, + to not scare users + Related: #1463411 + +* Wed Jan 10 2018 Michal Schorm - 3:10.2.12-1 +- Rebase to 10.2.12 +- Temporary fix for https://jira.mariadb.org/browse/MDEV-14537 removed +- TokuDB disabled + +* Mon Dec 11 2017 Michal Schorm - 3:10.2.11-2 +- Temporary fix for #1523875 removed, bug in Annobin fixed + Resolves: #1523875 + +* Sat Dec 09 2017 Michal Schorm - 3:10.2.11-1 +- Rebase to 10.2.11 +- Temporary fix for https://jira.mariadb.org/browse/MDEV-14537 introduced +- Temporary fix for #1523875 intoruced + Related: #1523875 + +* Wed Dec 06 2017 Michal Schorm - 3:10.2.10-2 +- Fix PID file location + Related: #1483331, #1515779 +- Remove 'Group' tags as they should not be used any more + Related: https://fedoraproject.org/wiki/RPMGroups + +* Mon Nov 20 2017 Michal Schorm - 3:10.2.10-1 +- Rebase to 10.2.10 version +- Patch 2: mariadb-install-test.patch has been incorporated by upstream +- Patch 8: mariadb-install-db-sharedir.patch; upstream started to use macros +- Update PCRE check +- Start using location libdir/mariadb for plugins +- Move libraries to libdir +- Divided to more sub-packages to match upstream's RPM list + Resolves: #1490401; #1400463 +- Update of Cmake arguments to supported format + Related: https://lists.launchpad.net/maria-discuss/msg04852.html +- Remove false Provides + +* Thu Oct 05 2017 Michal Schorm - 3:10.2.9-3 +- Fix client library obsolete + Related: #1498956 +- Enable testsuite again +- RPMLint error fix: + Remove unused python scripts which remained from TokuDB upstream +- RPMLint error fix: description line too long + +* Wed Oct 04 2017 Michal Schorm - 3:10.2.9-2 +- Fix of "with" and "without" macros, so they works +- Use 'iproute' dependency instead of 'net-tools' + Related: #1496131 +- Set server package to own /usr/lib64/mysql directory +- Use correct obsolete, so upgrade from maridb 10.1 to 10.2 is possible + with dnf "--allowerasing" option + Related: #1497234 +- Fix building with client library + +* Thu Sep 28 2017 Michal Schorm - 3:10.2.9-1 +- Rebase to 10.2.9 +- Testsuite temorarly disabled in order to fast deploy critical fix + Related: #1497234 + +* Wed Sep 20 2017 Michal Schorm - 3:10.2.8-5 +- Fix building without client library part +- Start building mariadb without client library part, + use mariadb-connector-c package >= 3.0 instead +- Use obosletes of "-libs" in "-common", if built without client library part + +* Mon Aug 28 2017 Honza Horak - 3:10.2.8-2 +- Fix paths in galera_recovery and galera_new_cluster + Resolves: #1403416 +- Support --defaults-group-suffix properly in systemd unit file + Resolves: #1485777 +- Allow 4567 port for tcp as well +- Install mysql-wait-ready on RHEL-6 for the SysV init +- Run mysql-prepare-db-dir as non-root +- Sync mysql.init with community-mysql + +* Sun Aug 20 2017 Honza Horak - 3:10.2.8-1 +- Rebase to 10.2.8 + +* Thu Aug 03 2017 Fedora Release Engineering - 3:10.2.7-8 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild + +* Wed Jul 26 2017 Fedora Release Engineering - 3:10.2.7-7 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild + +* Tue Jul 25 2017 Adam Williamson - 3:10.2.7-6 +- Revert previous change, go back to libmariadb headers (RHBZ #1474764) + +* Fri Jul 21 2017 Adam Williamson - 3:10.2.7-5 +- Install correct headers (server, not client) - MDEV-13370 + +* Wed Jul 19 2017 Jonathan Wakely - 3:10.2.7-4 +- Rebuilt for s390x binutils bug + +* Tue Jul 18 2017 Jonathan Wakely - 3:10.2.7-3 +- Rebuilt for Boost 1.64 + +* Thu Jul 13 2017 Michal Schorm - 3:10.2.7-2 +- Remove mysql-wait-* scripts. They aren't needed when using systemd "Type=notify" + +* Thu Jul 13 2017 Michal Schorm - 3:10.2.7-1 +- Rebase to 10.2.7 +- Get back mysql_config, its "--libmysqld-libs" is still needed + +* Wed Jul 12 2017 Adam Williamson - 3:10.2.6-4 +- Add manual Provides: for the libmysqlcient compat symlink + +* Wed Jul 12 2017 Adam Williamson - 3:10.2.6-3 +- Move libmysqlclient.so.18 compat link to -libs subpackage + +* Tue Jul 11 2017 Michal Schorm - 3:10.2.6-2 +- Disable Dtrace +- Disable Sphinx, circural dependency + +* Tue Jul 11 2017 Michal Schorm - 3:10.2.6-1 +- Rebase to 10.2.6 +- SSL patch removed +- 'libmariadb.so.3' replaced 'limysqlclient.so.18.0.0', symlinks provided +- "make test" removed, it needs running server and same test are included in the testsuite + +* Mon Jul 10 2017 Michal Schorm - 3:10.1.25-1 +- Rebase to 10.1.25 +- Disable plugins 'cracklib' and 'gssapi' by default +- Related: #1468028, #1464070 +- Looks like the testsuite removes its 'var' content correctly, + no need to do that explicitly. + +* Fri Jul 07 2017 Igor Gnatenko - 3:10.1.24-5 +- Rebuild due to bug in RPM (RHBZ #1468476) + +* Mon Jun 19 2017 Michal Schorm - 3:10.1.24-4 +- Use "/run" location instead of "/var/run" symlink +- Related: #1455811 +- Remove AppArmor files + +* Fri Jun 09 2017 Honza Horak - 3:10.1.24-3 +- Downstream script mariadb-prepare-db-dir fixed for CVE-2017-3265 +- Resolves: #1458940 +- Check properly that datadir includes only expected files +- Related: #1356897 + +* Wed Jun 07 2017 Michal Schorm - 3:10.1.24-2 +- Fixed incorrect Jemalloc initialization; #1459671 + +* Fri Jun 02 2017 Michal Schorm - 3:10.1.24-1 +- Rebase to 10.1.24 +- Build dependecies Bison and Libarchive added, others corrected +- Disabling Mroonga engine for i686 architecture, as it is not supported by MariaDB +- Removed patches: (fixed by upstream) + Patch5: mariadb-file-contents.patch + Patch14: mariadb-example-config-files.patch + Patch31: mariadb-string-overflow.patch + Patch32: mariadb-basedir.patch + Patch41: mariadb-galera-new-cluster-help.patch +- Resolves: rhbz#1414387 + CVE-2017-3313 +- Resolves partly: rhbz#1443408 + CVE-2017-3308 CVE-2017-3309 CVE-2017-3453 CVE-2017-3456 CVE-2017-3464 + +* Tue May 23 2017 Michal Schorm - 3:10.1.21-6 +- Plugin oqgraph enabled +- Plugin jemalloc enabled +- 'force' option for 'rm' removed +- Enabled '--big-test' option for the testsuite +- Disabled '--skip-rpl' option for the testsuite = replication tests enabled +- Multilib manpage added + +* Mon May 15 2017 Fedora Release Engineering - 3:10.1.21-5 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_27_Mass_Rebuild + +* Tue Mar 07 2017 Michal Schorm - 3:10.1.21-4 +- Cracklib plugin enabled +- Removed strmov patch, it is no longer needed. The issue was fixed long ago in both MariaDB and MySQL + +* Wed Feb 15 2017 Michal Schorm - 3:10.1.21-3 +- Fix for some RPMLint issues +- Fix: Only server utilities can be move to server-utils subpackage. The rest (from client) + were moved back to where they came from (client - the main subpackage) +- Added correct "Obsoletes" for the server-utils subpackage +- Fixed FTBFS in F26 on x86_64, because of -Werror option +- Related: #1421092, #1395127 + +* Fri Feb 10 2017 Fedora Release Engineering - 3:10.1.21-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild + +* Tue Jan 24 2017 Michal Schorm - 3:10.1.21-1 +- Rebase to version 10.1.21 +- Most of the non-essential utilites has been moved to the new sub-package mariadb-server-utils +- Patches "admincrash" and "errno" removed, they are no longer relevant + "mysql-embedded-check.c" removed, no longer relevant +- Buildrequires krb5-devel duplicity removed +- Manpage for mysql_secure_installation extended +- Preparation for the CrackLib plugin to be added (waiting for correct SELinux rules to be relased) +- Related: #1260821, #1205082, #1414387 + +* Tue Jan 03 2017 Honza Horak - 3:10.1.20-3 +- Add explicit EVR requirement in main package for -libs +- Related: #1406320 + +* Tue Dec 20 2016 Honza Horak - 3:10.1.20-2 +- Use correct macro when removing doc files +- Resolves: #1400981 + +* Sat Dec 17 2016 Michal Schorm - 3:10.1.20-1 +- Rebase to version 10.1.20 +- Related: #1405258 + +* Fri Dec 02 2016 Michal Schorm - 3:10.1.19-6 +- Move patch from specfile to standalone patch file +- Related: #1382988 + +* Thu Dec 01 2016 Rex Dieter - 3:10.1.19-6 +- -devel: use pkgconfig(openssl) to allow any implementation (like compat-openssl10) + +* Wed Nov 30 2016 Michal Schorm - 3:10.1.19-5 +- Testsuite blacklists heavily updated. Current tracker: #1399847 +- Log-error option added to all config files examples +- Resolves: #1382988 + +* Wed Nov 16 2016 Michal Schorm - 3:10.1.19-4 +- JdbcMariaDB.jar test removed +- PCRE version check added +- Related: #1382988, #1396945, #1096787 + +* Wed Nov 16 2016 Michal Schorm - 3:10.1.19-4 +- test suite ENABLED, consensus was made it still should be run every build + +* Wed Nov 16 2016 Michal Schorm - 3:10.1.19-2 +- fixed bug 1382988 +- added comment to the test suite +- test suite DISABLED for most builds in Koji, see comments + +* Wed Nov 16 2016 Michal Schorm - 3:10.1.19-1 +- Update to 10.1.19 +- added temporary support to build with OpenSSL 1.0 on Fedora >= 26 +- added krb5-devel pkg as Buldrquires to prevent gssapi failure + +* Tue Oct 4 2016 Jakub Dorňák - 3:10.1.18-1 +- Update to 10.1.18 + +* Wed Aug 31 2016 Jakub Dorňák - 3:10.1.17-1 +- Update to 10.1.17 + +* Mon Aug 29 2016 Jakub Dorňák - 3:10.1.16-2 +- Fixed galera replication +- Resolves: #1352946 + +* Tue Jul 19 2016 Jakub Dorňák - 3:10.1.16-1 +- Update to 10.1.16 + +* Fri Jul 15 2016 Honza Horak - 3:10.1.14-5 +- Fail build when test-suite fails +- Use license macro for inclusion of licenses + +* Thu Jul 14 2016 Honza Horak - 3:10.1.14-4 +- Revert Update to 10.1.15, this release is broken + https://lists.launchpad.net/maria-discuss/msg03691.html + +* Thu Jul 14 2016 Honza Horak - 2:10.1.15-3 +- Check datadir more carefully to avoid unwanted data corruption +- Related: #1335849 + +* Thu Jul 7 2016 Jakub Dorňák - 2:10.1.15-2 +- Bump epoch + (related to the downgrade from the pre-release version) + +* Fri Jul 1 2016 Jakub Dorňák - 1:10.1.15-1 +- Update to 10.1.15 + +* Fri Jul 1 2016 Jakub Dorňák - 1:10.1.14-3 +- Revert "Update to 10.2.0" + It is possible that MariaDB 10.2.0 won't be stable till f25 GA. + +* Tue Jun 21 2016 Pavel Raiskup - 1:10.1.14-3 +- BR multilib-rpm-config and use it for multilib workarounds +- install architecture dependant pc file to arch-dependant location + +* Thu May 26 2016 Jakub Dorňák - 1:10.2.0-2 +- Fix mysql-prepare-db-dir +- Resolves: #1335849 + +* Thu May 12 2016 Jakub Dorňák - 1:10.2.0-1 +- Update to 10.2.0 + +* Thu May 12 2016 Jakub Dorňák - 1:10.1.14-1 +- Add selinux policy +- Update to 10.1.14 (includes various bug fixes) +- Add -h and --help options to galera_new_cluster + +* Thu Apr 7 2016 Jakub Dorňák - 1:10.1.13-3 +- wsrep_on in galera.cnf + +* Tue Apr 5 2016 Jakub Dorňák - 1:10.1.13-2 +- Moved /etc/sysconfig/clustercheck + and /usr/share/mariadb/systemd/use_galera_new_cluster.conf + to mariadb-server-galera + +* Tue Mar 29 2016 Jakub Dorňák - 1:10.1.13-1 +- Update to 10.1.13 + +* Wed Mar 23 2016 Jakub Dorňák - 1:10.1.12-4 +- Fixed conflict with mariadb-galera-server + +* Tue Mar 22 2016 Jakub Dorňák - 1:10.1.12-3 +- Add subpackage mariadb-server-galera +- Resolves: 1310622 + +* Tue Mar 01 2016 Honza Horak - 1:10.1.12-2 +- Rebuild for BZ#1309199 (symbol versioning) + +* Mon Feb 29 2016 Jakub Dorňák - 1:10.1.12-1 +- Update to 10.1.12 + +* Tue Feb 16 2016 Honza Horak - 1:10.1.11-9 +- Remove dangling symlink to /etc/init.d/mysql + +* Sat Feb 13 2016 Honza Horak - 1:10.1.11-8 +- Use epoch for obsoleting mariadb-galera-server + +* Fri Feb 12 2016 Honza Horak - 1:10.1.11-7 +- Add Provides: bundled(pcre) in case we build with bundled pcre +- Related: #1302296 +- embedded-devel should require libaio-devel +- Resolves: #1290517 + +* Fri Feb 12 2016 Honza Horak - 1:10.1.11-6 +- Fix typo s/obsolate/obsolete/ + +* Thu Feb 11 2016 Honza Horak - 1:10.1.11-5 +- Add missing requirements for proper wsrep functionality +- Obsolate mariadb-galera & mariadb-galera-server (thanks Tomas Repik) +- Resolves: #1279753 +- Re-enable using libedit, which should be now fixed +- Related: #1201988 +- Remove mariadb-wait-ready call from systemd unit, we have now systemd notify support +- Make mariadb@.service similar to mariadb.service + +* Mon Feb 08 2016 Honza Horak - 1:10.1.11-4 +- Use systemd unit file more compatible with upstream + +* Sun Feb 07 2016 Honza Horak - 1:10.1.11-3 +- Temporarily disabling oqgraph for + https://mariadb.atlassian.net/browse/MDEV-9479 + +* Thu Feb 04 2016 Fedora Release Engineering - 1:10.1.11-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild + +* Wed Feb 3 2016 Jakub Dorňák - 1:10.1.11-1 +- Update to 10.1.11 + +* Tue Jan 19 2016 Jakub Dorňák - 1:10.1.10-1 +- Update to 10.1.10 + +* Mon Dec 07 2015 Dan Horák - 1:10.1.8-3 +- rebuilt for s390(x) + +* Tue Nov 03 2015 Honza Horak - 1:10.1.8-2 +- Expand variables in server.cnf + +* Thu Oct 22 2015 Jakub Dorňák - 1:10.1.8-1 +- Update to 10.1.8 + +* Thu Aug 27 2015 Jonathan Wakely - 1:10.0.21-2 +- Rebuilt for Boost 1.59 + +* Mon Aug 10 2015 Jakub Dorňák - 1:10.0.21-1 +- Update to 10.0.21 + +* Wed Jul 29 2015 Fedora Release Engineering - 1:10.0.20-3 +- Rebuilt for https://fedoraproject.org/wiki/Changes/F23Boost159 + +* Wed Jul 22 2015 David Tardon - 1:10.0.20-2 +- rebuild for Boost 1.58 + +* Tue Jun 23 2015 Honza Horak - 1:10.0.20-1 +- Update to 10.0.20 + +* Wed Jun 17 2015 Fedora Release Engineering - 1:10.0.19-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild + +* Wed Jun 03 2015 Dan Horák - 1:10.0.19-2 +- Update lists of failing tests (jdornak) +- Related: #1149647 + +* Mon May 11 2015 Honza Horak - 1:10.0.19-1 +- Update to 10.0.19 + +* Thu May 07 2015 Honza Horak - 1:10.0.18-1 +- Update to 10.0.18 + +* Thu May 07 2015 Honza Horak - 1:10.0.17-4 +- Include client plugins into -common package since they are used by both -libs + and base packages. +- Do not use libedit +- Related: #1201988 +- Let plugin dir to be owned by -common +- Use correct comment in the init script +- Related: #1184604 +- Add openssl as BuildRequires to run some openssl tests during build +- Related: #1189180 +- Fail in case any command in check fails +- Related: #1124791 +- Fix mysqladmin crash if run with -u root -p +- Resolves: #1207170 + +* Sat May 02 2015 Kalev Lember - 1:10.0.17-3 +- Rebuilt for GCC 5 C++11 ABI change + +* Fri Mar 06 2015 Honza Horak - 1:10.0.17-2 +- Wait for daemon ends +- Resolves: #1072958 +- Do not include symlink to libmysqlclient if not shipping the library +- Do not use scl prefix more than once in paths + Based on https://www.redhat.com/archives/sclorg/2015-February/msg00038.html + +* Wed Mar 04 2015 Honza Horak - 1:10.0.17-1 +- Rebase to version 10.0.17 +- Added variable for turn off skipping some tests + +* Tue Mar 03 2015 Honza Horak - 1:10.0.16-6 +- Check permissions when starting service on RHEL-6 +- Resolves: #1194699 +- Do not create test database by default +- Related: #1194611 + +* Fri Feb 13 2015 Matej Muzila - 1:10.0.16-4 +- Enable tokudb + +* Tue Feb 10 2015 Honza Horak - 1:10.0.16-3 +- Fix openssl_1 test + +* Wed Feb 4 2015 Jakub Dorňák - 1:10.0.16-2 +- Include new certificate for tests +- Update lists of failing tests +- Related: #1186110 + +* Tue Feb 3 2015 Jakub Dorňák - 1:10.0.16-9 +- Rebase to version 10.0.16 +- Resolves: #1187895 + +* Tue Jan 27 2015 Petr Machata - 1:10.0.15-9 +- Rebuild for boost 1.57.0 + +* Mon Jan 26 2015 Honza Horak - 1:10.0.15-8 +- Fix typo in the config file + +* Sun Jan 25 2015 Honza Horak - 1:10.0.15-7 +- Do not create log file in post script + +* Sat Jan 24 2015 Honza Horak - 1:10.0.15-6 +- Move server settings to config file under my.cnf.d dir + +* Sat Jan 24 2015 Honza Horak - 1:10.0.15-5 +- Fix path for sysconfig file + Filter provides in el6 properly + Fix initscript file location + +* Tue Jan 06 2015 Honza Horak - 1:10.0.15-4 +- Disable failing tests connect.mrr, connect.updelx2 on ppc and s390 + +* Mon Dec 22 2014 Honza Horak - 1:10.0.15-3 +- Fix macros paths in my.cnf +- Create old location for pid file if it remained in my.cnf + +* Fri Dec 05 2014 Honza Horak - 1:10.0.15-2 +- Rework usage of macros and remove some compatibility artefacts + +* Thu Nov 27 2014 Jakub Dorňák - 1:10.0.15-1 +- Update to 10.0.15 + +* Thu Nov 20 2014 Jan Stanek - 1:10.0.14-8 +- Applied upstream fix for mysql_config --cflags output. +- Resolves: #1160845 + +* Fri Oct 24 2014 Jan Stanek - 1:10.0.14-7 +- Fixed compat service file. +- Resolves: #1155700 + +* Mon Oct 13 2014 Honza Horak - 1:10.0.14-6 +- Remove bundled cmd-line-utils +- Related: #1079637 +- Move mysqlimport man page to proper package +- Disable main.key_cache test on s390 + Releated: #1149647 + +* Wed Oct 08 2014 Honza Horak - 1:10.0.14-5 +- Disable tests connect.part_file, connect.part_table + and connect.updelx +- Related: #1149647 + +* Wed Oct 01 2014 Honza Horak - 1:10.0.14-4 +- Add bcond_without mysql_names + Use more correct path when deleting mysql logrotate script + +* Wed Oct 01 2014 Honza Horak - 1:10.0.14-3 +- Build with system libedit +- Resolves: #1079637 + +* Mon Sep 29 2014 Honza Horak - 1:10.0.14-2 +- Add with_debug option + +* Mon Sep 29 2014 Honza Horak - 1:10.0.14-1 +- Update to 10.0.14 + +* Wed Sep 24 2014 Honza Horak - 1:10.0.13-8 +- Move connect engine to a separate package + Rename oqgraph engine to align with upstream packages +- Move some files to correspond with MariaDB upstream packages + client.cnf into -libs, mysql_plugin and msql2mysql into base, + tokuftdump and aria_* into -server, errmsg-utf8.txt into -errmsg +- Remove duplicate cnf files packaged using %%doc +- Check upgrade script added to warn about need for mysql_upgrade + +* Wed Sep 24 2014 Matej Muzila - 1:10.0.13-7 +- Client related libraries moved from mariadb-server to mariadb-libs +- Related: #1138843 + +* Mon Sep 08 2014 Honza Horak - 1:10.0.13-6 +- Disable vcol_supported_sql_funcs_myisam test on all arches +- Related: #1096787 +- Install systemd service file on RHEL-7+ + Server requires any mysql package, so it should be fine with older client + +* Thu Sep 04 2014 Honza Horak - 1:10.0.13-5 +- Fix paths in mysql_install_db script +- Resolves: #1134328 +- Use %%cmake macro + +* Tue Aug 19 2014 Honza Horak - 1:10.0.13-4 +- Build config subpackage everytime +- Disable failing tests: innodb_simulate_comp_failures_small, key_cache + rhbz#1096787 + +* Sun Aug 17 2014 Fedora Release Engineering - 1:10.0.13-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild + +* Thu Aug 14 2014 Honza Horak - 1:10.0.13-2 +- Include mysqld_unit only if required; enable tokudb in f20- + +* Wed Aug 13 2014 Honza Horak - 1:10.0.13-1 +- Rebase to version 10.0.13 + +* Tue Aug 12 2014 Honza Horak - 1:10.0.12-8 +- Introduce -config subpackage and ship base config files here + +* Tue Aug 5 2014 Honza Horak - 1:10.0.12-7 +- Adopt changes from mysql, thanks Bjorn Munch + +* Mon Jul 28 2014 Honza Horak - 1:10.0.12-6 +- Use explicit sysconfdir +- Absolut path for default value for pid file and error log + +* Tue Jul 22 2014 Honza Horak - 1:10.0.12-5 +- Hardcoded paths removed to work fine in chroot +- Spec rewrite to be more similar to oterh MySQL implementations +- Use variable for daemon unit name +- Include SysV init script if built on older system +- Add possibility to not ship some sub-packages + +* Mon Jul 21 2014 Honza Horak - 1:10.0.12-4 +- Reformating spec and removing unnecessary snippets + +* Tue Jul 15 2014 Honza Horak - 1:10.0.12-3 +- Enable OQGRAPH engine and package it as a sub-package +- Add support for TokuDB engine for x86_64 (currently still disabled) +- Re-enable tokudb_innodb_xa_crash again, seems to be fixed now +- Drop superfluous -libs and -embedded ldconfig deps (thanks Ville Skyttä) +- Separate -lib and -common sub-packages +- Require /etc/my.cnf instead of shipping it +- Include README.mysql-cnf +- Multilib support re-worked +- Introduce new option with_mysqld_unit +- Removed obsolete mysql-cluster, the package should already be removed +- Improve error message when log file is not writable +- Compile all binaries with full RELRO (RHBZ#1092548) +- Use modern symbol filtering with compatible backup +- Add more groupnames for server's my.cnf +- Error messages now provided by a separate package (thanks Alexander Barkov) +- Expand paths in helper scripts using cmake + +* Wed Jun 18 2014 Mikko Tiihonen - 1:10.0.12-2 +- Use -fno-delete-null-pointer-checks to avoid segfaults with gcc 4.9 + +* Tue Jun 17 2014 Jakub Dorňák - 1:10.0.12-1 +- Rebase to version 10.0.12 + +* Sat Jun 07 2014 Fedora Release Engineering - 1:10.0.11-5 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild + +* Tue Jun 3 2014 Jakub Dorňák - 1:10.0.11-4 +- rebuild with tests failing on different arches disabled (#1096787) + +* Thu May 29 2014 Dan Horák - 1:10.0.11-2 +- rebuild with tests failing on big endian arches disabled (#1096787) + +* Wed May 14 2014 Jakub Dorňák - 1:10.0.11-1 +- Rebase to version 10.0.11 + +* Mon May 05 2014 Honza Horak - 1:10.0.10-3 +- Script for socket check enhanced + +* Thu Apr 10 2014 Jakub Dorňák - 1:10.0.10-2 +- use system pcre library + +* Thu Apr 10 2014 Jakub Dorňák - 1:10.0.10-1 +- Rebase to version 10.0.10 + +* Wed Mar 12 2014 Honza Horak - 1:5.5.36-2 +- Server crashes on SQL select containing more group by and left join statements using innodb tables +- Resolves: #1065676 +- Fix paths in helper scripts +- Move language files into mariadb directory + +* Thu Mar 06 2014 Honza Horak - 1:5.5.36-1 +- Rebase to 5.5.36 + https://kb.askmonty.org/en/mariadb-5536-changelog/ + +* Tue Feb 25 2014 Honza Horak 1:5.5.35-5 +- Daemon helper scripts sanity changes and spec files clean-up + +* Tue Feb 11 2014 Honza Horak 1:5.5.35-4 +- Fix typo in mysqld.service +- Resolves: #1063981 + +* Wed Feb 5 2014 Honza Horak 1:5.5.35-3 +- Do not touch the log file in post script, so it does not get wrong owner +- Resolves: #1061045 + +* Thu Jan 30 2014 Honza Horak 1:5.5.35-1 +- Rebase to 5.5.35 + https://kb.askmonty.org/en/mariadb-5535-changelog/ + Also fixes: CVE-2014-0001, CVE-2014-0412, CVE-2014-0437, CVE-2013-5908, + CVE-2014-0420, CVE-2014-0393, CVE-2013-5891, CVE-2014-0386, CVE-2014-0401, + CVE-2014-0402 +- Resolves: #1054043 +- Resolves: #1059546 + +* Tue Jan 14 2014 Honza Horak - 1:5.5.34-9 +- Adopt compatible system versioning +- Related: #1045013 +- Use compatibility mysqld.service instead of link +- Related: #1014311 + +* Mon Jan 13 2014 Rex Dieter 1:5.5.34-8 +- move mysql_config alternatives scriptlets to -devel too + +* Fri Jan 10 2014 Honza Horak 1:5.5.34-7 +- Build with -O3 on ppc64 +- Related: #1051069 +- Move mysql_config to -devel sub-package and remove Require: mariadb +- Related: #1050920 + +* Fri Jan 10 2014 Marcin Juszkiewicz 1:5.5.34-6 +- Disable main.gis-precise test also for AArch64 +- Disable perfschema.func_file_io and perfschema.func_mutex for AArch64 + (like it is done for 32-bit ARM) + +* Fri Jan 10 2014 Honza Horak 1:5.5.34-5 +- Clean all non-needed doc files properly + +* Wed Jan 8 2014 Honza Horak 1:5.5.34-4 +- Read socketfile location in mariadb-prepare-db-dir script + +* Mon Jan 6 2014 Honza Horak 1:5.5.34-3 +- Don't test EDH-RSA-DES-CBC-SHA cipher, it seems to be removed from openssl + which now makes mariadb/mysql FTBFS because openssl_1 test fails +- Related: #1044565 +- Use upstream's layout for symbols version in client library +- Related: #1045013 +- Check if socket file is not being used by another process at a time + of starting the service +- Related: #1045435 +- Use %%ghost directive for the log file +- Related: 1043501 + +* Wed Nov 27 2013 Honza Horak 1:5.5.34-2 +- Fix mariadb-wait-ready script + +* Fri Nov 22 2013 Honza Horak 1:5.5.34-1 +- Rebase to 5.5.34 + +* Mon Nov 4 2013 Honza Horak 1:5.5.33a-4 +- Fix spec file to be ready for backport by Oden Eriksson +- Resolves: #1026404 + +* Mon Nov 4 2013 Honza Horak 1:5.5.33a-3 +- Add pam-devel to build-requires in order to build +- Related: #1019945 +- Check if correct process is running in mysql-wait-ready script +- Related: #1026313 + +* Mon Oct 14 2013 Honza Horak 1:5.5.33a-2 +- Turn on test suite + +* Thu Oct 10 2013 Honza Horak 1:5.5.33a-1 +- Rebase to 5.5.33a + https://kb.askmonty.org/en/mariadb-5533-changelog/ + https://kb.askmonty.org/en/mariadb-5533a-changelog/ +- Enable outfile_loaddata test +- Disable tokudb_innodb_xa_crash test + +* Mon Sep 2 2013 Honza Horak - 1:5.5.32-12 +- Re-organize my.cnf to include only generic settings +- Resolves: #1003115 +- Move pid file location to /var/run/mariadb +- Make mysqld a symlink to mariadb unit file rather than the opposite way +- Related: #999589 + +* Thu Aug 29 2013 Honza Horak - 1:5.5.32-11 +- Move log file into /var/log/mariadb/mariadb.log +- Rename logrotate script to mariadb +- Resolves: #999589 + +* Wed Aug 14 2013 Rex Dieter 1:5.5.32-10 +- fix alternatives usage + +* Tue Aug 13 2013 Honza Horak - 1:5.5.32-9 +- Multilib issues solved by alternatives +- Resolves: #986959 + +* Sat Aug 03 2013 Petr Pisar - 1:5.5.32-8 +- Perl 5.18 rebuild + +* Wed Jul 31 2013 Honza Horak - 1:5.5.32-7 +- Do not use login shell for mysql user + +* Tue Jul 30 2013 Honza Horak - 1:5.5.32-6 +- Remove unneeded systemd-sysv requires +- Provide mysql-compat-server symbol +- Create mariadb.service symlink +- Fix multilib header location for arm +- Enhance documentation in the unit file +- Use scriptstub instead of links to avoid multilib conflicts +- Add condition for doc placement in F20+ + +* Sun Jul 28 2013 Dennis Gilmore - 1:5.5.32-5 +- remove "Requires(pretrans): systemd" since its not possible +- when installing mariadb and systemd at the same time. as in a new install + +* Sat Jul 27 2013 Kevin Fenzi 1:5.5.32-4 +- Set rpm doc macro to install docs in unversioned dir + +* Fri Jul 26 2013 Dennis Gilmore 1:5.5.32-3 +- add Requires(pre) on systemd for the server package + +* Tue Jul 23 2013 Dennis Gilmore 1:5.5.32-2 +- replace systemd-units requires with systemd +- remove solaris files + +* Fri Jul 19 2013 Honza Horak 1:5.5.32-1 +- Rebase to 5.5.32 + https://kb.askmonty.org/en/mariadb-5532-changelog/ +- Clean-up un-necessary systemd snippets + +* Wed Jul 17 2013 Petr Pisar - 1:5.5.31-7 +- Perl 5.18 rebuild + +* Mon Jul 1 2013 Honza Horak 1:5.5.31-6 +- Test suite params enhanced to decrease server condition influence +- Fix misleading error message when uninstalling built-in plugins +- Related: #966873 + +* Thu Jun 27 2013 Honza Horak 1:5.5.31-5 +- Apply fixes found by Coverity static analysis tool + +* Wed Jun 19 2013 Honza Horak 1:5.5.31-4 +- Do not use pretrans scriptlet, which doesn't work in anaconda +- Resolves: #975348 + +* Fri Jun 14 2013 Honza Horak 1:5.5.31-3 +- Explicitly enable mysqld if it was enabled in the beginning + of the transaction. + +* Thu Jun 13 2013 Honza Horak 1:5.5.31-2 +- Apply man page fix from Jan Stanek + +* Fri May 24 2013 Honza Horak 1:5.5.31-1 +- Rebase to 5.5.31 + https://kb.askmonty.org/en/mariadb-5531-changelog/ +- Preserve time-stamps in case of installed files +- Use /var/tmp instead of /tmp, since the later is using tmpfs, + which can cause problems +- Resolves: #962087 +- Fix test suite requirements + +* Sun May 5 2013 Honza Horak 1:5.5.30-2 +- Remove mytop utility, which is packaged separately +- Resolve multilib conflicts in mysql/private/config.h + +* Fri Mar 22 2013 Honza Horak 1:5.5.30-1 +- Rebase to 5.5.30 + https://kb.askmonty.org/en/mariadb-5530-changelog/ + +* Fri Mar 22 2013 Honza Horak 1:5.5.29-11 +- Obsolete MySQL since it is now renamed to community-mysql +- Remove real- virtual names + +* Thu Mar 21 2013 Honza Horak 1:5.5.29-10 +- Adding epoch to have higher priority than other mysql implementations + when comes to provider comparison + +* Wed Mar 13 2013 Honza Horak 5.5.29-9 +- Let mariadb-embedded-devel conflict with MySQL-embedded-devel +- Adjust mariadb-sortbuffer.patch to correspond with upstream patch + +* Mon Mar 4 2013 Honza Horak 5.5.29-8 +- Mask expected warnings about setrlimit in test suite + +* Thu Feb 28 2013 Honza Horak 5.5.29-7 +- Use configured prefix value instead of guessing basedir + in mysql_config +- Resolves: #916189 +- Export dynamic columns and non-blocking API functions documented + by upstream + +* Wed Feb 27 2013 Honza Horak 5.5.29-6 +- Fix sort_buffer_length option type + +* Wed Feb 13 2013 Honza Horak 5.5.29-5 +- Suppress warnings in tests and skip tests also on ppc64p7 + +* Tue Feb 12 2013 Honza Horak 5.5.29-4 +- Suppress warning in tests on ppc +- Enable fixed index_merge_myisam test case + +* Thu Feb 07 2013 Honza Horak 5.5.29-3 +- Packages need to provide also %%_isa version of mysql package +- Provide own symbols with real- prefix to distinguish from mysql + unambiguously +- Fix format for buffer size in error messages (MDEV-4156) +- Disable some tests that fail on ppc and s390 +- Conflict only with real-mysql, otherwise mariadb conflicts with ourself + +* Tue Feb 05 2013 Honza Horak 5.5.29-2 +- Let mariadb-libs to own /etc/my.cnf.d + +* Thu Jan 31 2013 Honza Horak 5.5.29-1 +- Rebase to 5.5.29 + https://kb.askmonty.org/en/mariadb-5529-changelog/ +- Fix inaccurate default for socket location in mysqld-wait-ready +- Resolves: #890535 + +* Thu Jan 31 2013 Honza Horak 5.5.28a-8 +- Enable obsoleting mysql + +* Wed Jan 30 2013 Honza Horak 5.5.28a-7 +- Adding necessary hacks for perl dependency checking, rpm is still + not wise enough +- Namespace sanity re-added for symbol default_charset_info + +* Mon Jan 28 2013 Honza Horak 5.5.28a-6 +- Removed %%{_isa} from provides/obsoletes, which doesn't allow + proper obsoleting +- Do not obsolete mysql at the time of testing + +* Thu Jan 10 2013 Honza Horak 5.5.28a-5 +- Added licenses LGPLv2 and BSD +- Removed wrong usage of %%{epoch} +- Test-suite is run in %%check +- Removed perl dependency checking adjustment, rpm seems to be smart enough +- Other minor spec file fixes + +* Tue Dec 18 2012 Honza Horak 5.5.28a-4 +- Packaging of MariaDB based on MySQL package +