diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..ec4c75d
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+SOURCES/mariadb-10.2.8.tar.gz
diff --git a/.rh-mariadb102-mariadb.metadata b/.rh-mariadb102-mariadb.metadata
new file mode 100644
index 0000000..a61a281
--- /dev/null
+++ b/.rh-mariadb102-mariadb.metadata
@@ -0,0 +1 @@
+80dcd455986eec254fc81b6bbedd4a542e8af495 SOURCES/mariadb-10.2.8.tar.gz
diff --git a/README.md b/README.md
deleted file mode 100644
index 98f42b4..0000000
--- a/README.md
+++ /dev/null
@@ -1,4 +0,0 @@
-The master branch has no content
-
-Look at the c7 branch if you are working with CentOS-7, or the c4/c5/c6 branch for CentOS-4, 5 or 6
-If you find this file in a distro specific branch, it means that no content has been checked in yet
diff --git a/SOURCES/LICENSE.clustercheck b/SOURCES/LICENSE.clustercheck
new file mode 100644
index 0000000..609015d
--- /dev/null
+++ b/SOURCES/LICENSE.clustercheck
@@ -0,0 +1,27 @@
+Copyright (c) 2012-2014, Olaf van Zandwijk
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors
+   may be used to endorse or promote products derived from this software without
+   specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/SOURCES/README.mariadb-devel b/SOURCES/README.mariadb-devel
new file mode 100644
index 0000000..3e7a55a
--- /dev/null
+++ b/SOURCES/README.mariadb-devel
@@ -0,0 +1,44 @@
+This is a short overview how rh-mariadb101-mariadb-devel should be used.
+
+* General information
+
+Red Hat Software Collections contains the server part of MariaDB 10.1 database.
+The core Red Hat Enterprise Linux 6 provides version 5.1 of MySQL databases
+(client library and server daemon) and the core Red Hat Enterprise Linux 7
+provides version 5.5 of MariaDB databases (client library and server daemon) .
+
+A protocol which is used between the client library and the daemon (MySQL
+and MariaDB are compatible enough from this POV) is stable across database
+versions, so using, for example, the MySQL 5.1 client library with the
+MariaDB 10.1 daemon works as expected.
+
+
+* Usage of database connectors for dynamic languages
+
+Client libraries from MySQL 5.1 or MariaDB 5.5 are used in database connectors
+for dynamic languages (Python, Perl, PHP, Ruby) and libraries that are part
+of the core Red Hat Enterprise Linux 6 and Red Hat Enterprise Linux 7.
+
+The same client libraries from MySQL 5.1 or MariaDB 5.5 are used in database
+connectors for more recent version of dynamic languages that are part of
+the Red Hat Software Collections.
+
+
+* How to build applications for MariaDB 10.1 from Red Hat Software Collection
+
+MariaDB 10.1 from Red Hat Software Collection does not include database
+connectors; client libraries packaged in the MariaDB 10.1 Red Hat Software
+Collections database packages are not supposed to be used as they are included
+only for purposes of server utilities and the daemon. Users are instead
+expected to use the system libraries and database connectors provided by
+MySQL 5.1 or MariaDB 5.5 with the core system.
+
+It means that users who would like to link their application against MariaDB
+client library should compile and link it against MySQL 5.1 or MariaDB 5.5
+in the core Red Hat Enterprise Linux environment, not in MariaDB 10.1 Red Hat
+Software Collections environment.
+
+The only exception to this are server-side plugins, which are expected
+to be built under MariaDB 10.1 Red Hat Software Collections environment,
+which means the build process should be run inside "scl enable rh-mysql101 '...'"
+call.
diff --git a/SOURCES/README.mysql-cnf b/SOURCES/README.mysql-cnf
new file mode 100644
index 0000000..3700c7f
--- /dev/null
+++ b/SOURCES/README.mysql-cnf
@@ -0,0 +1,13 @@
+This directory contains prepared configuration files with .cnf extension,
+which provide a configuration for some common MariaDB deployment scenarios.
+These configuration files do not include the default configuration of datadir,
+log-file and pid-file locations, as specified in the default my.cnf file,
+provided in this distribution.
+
+Thus, it is recommended to use these configuration files as an addition to the
+default my.cnf configuration file.
+
+Since default my.cnf contains `!includedir @INSTALL_SYSCONF2DIR@` directive, it is
+recommended to copy required configuration under @INSTALL_SYSCONF2DIR@ directory,
+so the default my.cnf specifications will be extended.
+
diff --git a/SOURCES/README.mysql-docs b/SOURCES/README.mysql-docs
new file mode 100644
index 0000000..dd894a7
--- /dev/null
+++ b/SOURCES/README.mysql-docs
@@ -0,0 +1,4 @@
+The official MySQL documentation is not freely redistributable, so we cannot
+include it in RHEL or Fedora.  You can find it on-line at
+
+http://dev.mysql.com/doc/
diff --git a/SOURCES/README.mysql-license b/SOURCES/README.mysql-license
new file mode 100644
index 0000000..ceabbcf
--- /dev/null
+++ b/SOURCES/README.mysql-license
@@ -0,0 +1,9 @@
+MySQL is distributed under GPL v2, but there are some licensing exceptions
+that allow the client libraries to be linked with a non-GPL application,
+so long as the application is under a license approved by Oracle.
+For details see
+
+http://www.mysql.com/about/legal/licensing/foss-exception/
+
+Some innobase code from Percona and Google is under BSD license.
+Some code related to test-suite is under LGPLv2.
diff --git a/SOURCES/clustercheck.sh b/SOURCES/clustercheck.sh
new file mode 100644
index 0000000..782dbb6
--- /dev/null
+++ b/SOURCES/clustercheck.sh
@@ -0,0 +1,89 @@
+#!/bin/bash
+#
+# Script to make a proxy (ie HAProxy) capable of monitoring Galera cluster nodes properly
+#
+# Author: Olaf van Zandwijk <olaf.vanzandwijk@nedap.com>
+# Author: Raghavendra Prabhu <raghavendra.prabhu@percona.com>
+# Author: Ryan O'Hara <rohara@redhat.com>
+#
+# Documentation and download: https://github.com/olafz/percona-clustercheck
+#
+# Based on the original script from Unai Rodriguez
+#
+
+if [ -f @INSTALL_SYSCONFDIR@/sysconfig/clustercheck ]; then
+    . @INSTALL_SYSCONFDIR@/sysconfig/clustercheck
+fi
+
+MYSQL_USERNAME="${MYSQL_USERNAME-clustercheckuser}"
+MYSQL_PASSWORD="${MYSQL_PASSWORD-clustercheckpassword!}"
+MYSQL_HOST="${MYSQL_HOST:-127.0.0.1}"
+MYSQL_PORT="${MYSQL_PORT:-3306}"
+ERR_FILE="${ERR_FILE:-/dev/null}"
+AVAILABLE_WHEN_DONOR=${AVAILABLE_WHEN_DONOR:-0}
+AVAILABLE_WHEN_READONLY=${AVAILABLE_WHEN_READONLY:-1}
+DEFAULTS_EXTRA_FILE=${DEFAULTS_EXTRA_FILE:-@INSTALL_SYSCONFDIR@/my.cnf}
+
+#Timeout exists for instances where mysqld may be hung
+TIMEOUT=10
+
+if [[ -r $DEFAULTS_EXTRA_FILE ]];then
+    MYSQL_CMDLINE="mysql --defaults-extra-file=$DEFAULTS_EXTRA_FILE -nNE \
+                    --connect-timeout=$TIMEOUT \
+                    --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \
+                    --host=${MYSQL_HOST} --port=${MYSQL_PORT}"
+else
+    MYSQL_CMDLINE="mysql -nNE --connect-timeout=$TIMEOUT \
+                    --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} \
+                    --host=${MYSQL_HOST} --port=${MYSQL_PORT}"
+fi
+#
+# Perform the query to check the wsrep_local_state
+#
+WSREP_STATUS=$($MYSQL_CMDLINE -e "SHOW STATUS LIKE 'wsrep_local_state';" \
+    2>${ERR_FILE} | tail -1 2>>${ERR_FILE})
+
+if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]]
+then
+    # Check only when set to 0 to avoid latency in response.
+    if [[ $AVAILABLE_WHEN_READONLY -eq 0 ]];then
+        READ_ONLY=$($MYSQL_CMDLINE -e "SHOW GLOBAL VARIABLES LIKE 'read_only';" \
+                    2>${ERR_FILE} | tail -1 2>>${ERR_FILE})
+
+        if [[ "${READ_ONLY}" == "ON" ]];then
+            # Galera cluster node local state is 'Synced', but it is in
+            # read-only mode. The variable AVAILABLE_WHEN_READONLY is set to 0.
+            # => return HTTP 503
+            # Shell return-code is 1
+            echo -en "HTTP/1.1 503 Service Unavailable\r\n"
+            echo -en "Content-Type: text/plain\r\n"
+            echo -en "Connection: close\r\n"
+            echo -en "Content-Length: 35\r\n"
+            echo -en "\r\n"
+            echo -en "Galera cluster node is read-only.\r\n"
+            sleep 0.1
+            exit 1
+        fi
+    fi
+    # Galera cluster node local state is 'Synced' => return HTTP 200
+    # Shell return-code is 0
+    echo -en "HTTP/1.1 200 OK\r\n"
+    echo -en "Content-Type: text/plain\r\n"
+    echo -en "Connection: close\r\n"
+    echo -en "Content-Length: 32\r\n"
+    echo -en "\r\n"
+    echo -en "Galera cluster node is synced.\r\n"
+    sleep 0.1
+    exit 0
+else
+    # Galera cluster node local state is not 'Synced' => return HTTP 503
+    # Shell return-code is 1
+    echo -en "HTTP/1.1 503 Service Unavailable\r\n"
+    echo -en "Content-Type: text/plain\r\n"
+    echo -en "Connection: close\r\n"
+    echo -en "Content-Length: 36\r\n"
+    echo -en "\r\n"
+    echo -en "Galera cluster node is not synced.\r\n"
+    sleep 0.1
+    exit 1
+fi
diff --git a/SOURCES/daemon-scl-helper.sh b/SOURCES/daemon-scl-helper.sh
new file mode 100644
index 0000000..7f0ec05
--- /dev/null
+++ b/SOURCES/daemon-scl-helper.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+
+# This helper script is necessary for having proper SELinux context of daemon
+# process run in SCL environment via systemd unit file.
+# Without this script the process looses SELinux type because /usr/bin/scl
+# has context bin_t and unit_t -> bin_t results in unconfined process running.
+# If this helper script has the same SELinux context as the original binary,
+# the process will have proper SELinux context.
+#
+# This script was designed to be usable the same as the scl command is used,
+# including the collections given as more arguments, separated from binary
+# itself by -- separator.
+# So it is possible to use the list of collections to be enabled via
+# environment file.
+# Thus, instead of:
+#   /usr/bin/scl enable scl1 scl2 -- /path/to/bin arg1 arg2
+# you can use:
+#   /usr/bin/this-script enable scl1 scl2 -- /path/to/bin arg1 arg2
+#
+# Notice: do not forget to set proper SELinux context for this file.
+# The context should be the same as the binary running has.
+#
+# More information at http://bugzilla.redhat.com/show_bug.cgi?id=1172683
+
+action="$1"
+shift
+
+while [ -n "$1" ] && [ "$1" != "--" ] ; do
+  source scl_source "$action" "$1"
+  shift
+done
+
+if [ $# -le 2 ] ; then
+  echo "Usage `basename $0` enable sclname [sclname ...] -- /path/to/bin [arg ...]" >&2
+  exit 1
+fi
+
+shift
+
+exec "$@"
+
+
+
diff --git a/SOURCES/mariadb-admincrash.patch b/SOURCES/mariadb-admincrash.patch
new file mode 100644
index 0000000..cdad20c
--- /dev/null
+++ b/SOURCES/mariadb-admincrash.patch
@@ -0,0 +1,24 @@
+mysqladmin crash on execution of below command:
+
+  #> mysqladmin -u root -p
+  ...
+  Segmentation fault (core dumped)
+
+This is probably caused by memory corruption based on working with temp_argv[-1].
+
+RHBZ: #1207041
+Upstream report: https://mariadb.atlassian.net/browse/MDEV-7883
+
+diff -up mariadb-5.5.41/client/mysqladmin.cc.bz1207041 mariadb-5.5.41/client/mysqladmin.cc
+--- mariadb-5.5.41/client/mysqladmin.cc.bz1207041	2015-03-30 12:37:31.078880914 +0200
++++ mariadb-5.5.41/client/mysqladmin.cc	2015-03-30 13:03:32.442152833 +0200
+@@ -1266,7 +1266,8 @@ static char **mask_password(int argc, ch
+      }
+     argc--;
+   }
+-  temp_argv[argc]= my_strdup((*argv)[argc], MYF(MY_FAE));
++  if (argc >= 0)
++    temp_argv[argc]= my_strdup((*argv)[argc], MYF(MY_FAE));
+   return(temp_argv);
+ }
+ 
diff --git a/SOURCES/mariadb-errno.patch b/SOURCES/mariadb-errno.patch
new file mode 100644
index 0000000..18038b0
--- /dev/null
+++ b/SOURCES/mariadb-errno.patch
@@ -0,0 +1,17 @@
+--- mariadb-10.0.10/include/my_sys.h.p1	2014-03-30 19:56:37.000000000 +0200
++++ mariadb-10.0.10/include/my_sys.h	2014-04-07 15:30:20.627060157 +0200
+@@ -218,13 +218,7 @@ extern void my_large_free(uchar *ptr);
+ #define my_safe_afree(ptr, size) my_afree(ptr)
+ #endif /* HAVE_ALLOCA */
+ 
+-#ifndef errno				/* did we already get it? */
+-#ifdef HAVE_ERRNO_AS_DEFINE
+-#include <errno.h>			/* errno is a define */
+-#else
+-extern int errno;			/* declare errno */
+-#endif
+-#endif					/* #ifndef errno */
++#include <errno.h>				/* errno is a define */
+ extern char *home_dir;			/* Home directory for user */
+ extern MYSQL_PLUGIN_IMPORT char  *mysql_data_home;
+ extern const char *my_progname;		/* program-name (printed in errors) */
diff --git a/SOURCES/mariadb-file-contents.patch b/SOURCES/mariadb-file-contents.patch
new file mode 100644
index 0000000..3ad6a44
--- /dev/null
+++ b/SOURCES/mariadb-file-contents.patch
@@ -0,0 +1,46 @@
+Upstream chooses to install INFO_SRC and INFO_BIN into the docs dir, which
+breaks at least two packaging commandments, so we put them into $libdir
+instead.  That means we have to hack the file_contents regression test
+to know about this.
+
+Recommendation they change is at http://bugs.mysql.com/bug.php?id=61425
+
+
+diff -up mariadb-10.0.12/mysql-test/t/file_contents.test.file_contents mariadb-10.0.12/mysql-test/t/file_contents.test.
+diff -up mariadb-10.0.12/mysql-test/t/file_contents.test.file_contents mariadb-10.0.12/mysql-test/t/file_contents.test
+--- mariadb-10.0.12/mysql-test/t/file_contents.test.file_contents	2014-06-12 11:26:03.000000000 +0200
++++ mariadb-10.0.12/mysql-test/t/file_contents.test	2014-07-24 23:53:49.833176793 +0200
+@@ -11,7 +11,7 @@
+ --perl
+ print "\nChecking 'INFO_SRC' and 'INFO_BIN'\n";
+ $dir_bin = $ENV{'MYSQL_BINDIR'};
+-if ($dir_bin eq '/usr/') {
++if ($dir_bin =~ '.*/usr/$') {
+   # RPM package
+   $dir_docs = $dir_bin;
+   $dir_docs =~ s|/lib|/share/doc|;
+@@ -22,7 +22,7 @@ if ($dir_bin eq '/usr/') {
+     # RedHat: version number in directory name
+     $dir_docs = glob "$dir_docs/MariaDB-server*";
+   }
+-} elsif ($dir_bin eq '/usr') {
++} elsif ($dir_bin =~ '.*/usr$') {
+   # RPM build during development
+   $dir_docs = "$dir_bin/share/doc";
+   if(-d "$dir_docs/packages") {
+@@ -32,6 +32,15 @@ if ($dir_bin eq '/usr/') {
+     # RedHat/Debian: version number in directory name
+     $dir_docs = glob "$dir_docs/mariadb-server-*";
+     $dir_docs = glob "$dir_docs/MariaDB-server*" unless -d $dir_docs;
++
++    # All the above is entirely wacko, because these files are not docs;
++    # they should be kept in libdir instead.  mtr does not provide a nice
++    # way to find libdir though, so we have to kluge it like this:
++    if (-d "$dir_bin/lib64/mysql") {
++       $dir_docs = "$dir_bin/lib64/mysql";
++    } else {
++       $dir_docs = "$dir_bin/lib/mysql";
++    }
+   }
+   # Slackware
+   $dir_docs = glob "$dir_bin/doc/mariadb-[0-9]*" unless -d $dir_docs;
diff --git a/SOURCES/mariadb-galera-macros.patch b/SOURCES/mariadb-galera-macros.patch
new file mode 100644
index 0000000..b43a8cc
--- /dev/null
+++ b/SOURCES/mariadb-galera-macros.patch
@@ -0,0 +1,12 @@
+diff -up mariadb-10.2.6/scripts/galera_recovery.sh.newpatch mariadb-10.2.6/scripts/galera_recovery.sh
+--- mariadb-10.2.6/scripts/galera_recovery.sh.newpatch	2017-06-26 10:46:52.143445636 +0200
++++ mariadb-10.2.6/scripts/galera_recovery.sh	2017-06-26 10:48:01.666569584 +0200
+@@ -68,7 +68,7 @@ parse_arguments() {
+ 
+ wsrep_recover_position() {
+   # Redirect server's error log to the log file.
+-  eval /usr/sbin/mysqld $cmdline_args --user=$user --wsrep_recover \
++  eval @libexecdir@/mysqld $cmdline_args --user=$user --wsrep_recover \
+     --log-error="$log_file"
+   ret=$?
+   if [ $ret -ne 0 ]; then
diff --git a/SOURCES/mariadb-galera-new-cluster-init.patch b/SOURCES/mariadb-galera-new-cluster-init.patch
new file mode 100644
index 0000000..fb55cde
--- /dev/null
+++ b/SOURCES/mariadb-galera-new-cluster-init.patch
@@ -0,0 +1,20 @@
+diff -up mariadb-10.2.6/scripts/galera_new_cluster.sh.p42 mariadb-10.2.6/scripts/galera_new_cluster.sh
+--- mariadb-10.2.6/scripts/galera_new_cluster.sh.p42	2017-06-18 22:08:10.921574458 +0200
++++ mariadb-10.2.6/scripts/galera_new_cluster.sh	2017-06-18 22:13:58.836159661 +0200
+@@ -24,7 +24,13 @@ fi
+ VERSION="@VERSION@@MYSQL_SERVER_SUFFIX@"
+ COMPILATION_COMMENT="@COMPILATION_COMMENT@"
+ 
+-systemctl set-environment _WSREP_NEW_CLUSTER='--wsrep-new-cluster' && \
+-    systemctl start ${1:-@DAEMON_NAME@}
++echo "_WSREP_NEW_CLUSTER='--wsrep-new-cluster'" >> @sysconfdir@/sysconfig/mariadb
++ 
++service @DAEMON_NAME@ start
++
++EXIT_CODE=$?
++
++sed -i -r "/^_WSREP_NEW_CLUSTER='--wsrep-new-cluster'$/d" @sysconfdir@/sysconfig/mariadb
++
++exit $EXIT_CODE
+ 
+-systemctl set-environment _WSREP_NEW_CLUSTER=''
diff --git a/SOURCES/mariadb-galera.cnf.patch b/SOURCES/mariadb-galera.cnf.patch
new file mode 100644
index 0000000..6ea6c60
--- /dev/null
+++ b/SOURCES/mariadb-galera.cnf.patch
@@ -0,0 +1,12 @@
+--- mariadb-10.1.11/support-files/wsrep.cnf.sh.orig	2016-04-06 16:55:28.429983803 +0200
++++ mariadb-10.1.11/support-files/wsrep.cnf.sh	2016-04-06 16:56:02.194964351 +0200
+@@ -30,6 +30,9 @@ bind-address=0.0.0.0
+ ## WSREP options
+ ##
+ 
++# Enable wsrep
++wsrep_on=1
++
+ # Full path to wsrep provider library or 'none'
+ wsrep_provider=none
+ 
diff --git a/SOURCES/mariadb-install-db-sharedir.patch b/SOURCES/mariadb-install-db-sharedir.patch
new file mode 100644
index 0000000..7595d24
--- /dev/null
+++ b/SOURCES/mariadb-install-db-sharedir.patch
@@ -0,0 +1,40 @@
+Use configured value instead of hardcoded path
+
+diff -up mariadb-10.1.19/scripts/mysql_install_db.pl.in.pbasedir mariadb-10.1.19/scripts/mysql_install_db.pl.in
+--- mariadb-10.1.19/scripts/mysql_install_db.pl.in.pbasedir	2016-11-19 13:08:53.882777759 +0100
++++ mariadb-10.1.19/scripts/mysql_install_db.pl.in	2016-11-19 13:08:53.880777758 +0100
+@@ -320,7 +320,7 @@ elsif ( $opt->{basedir} )
+                     find_in_basedir($opt,"file","mysqld-nt",
+                                   "bin");  # ,"sql"
+   $srcpkgdatadir  = find_in_basedir($opt,"dir","fill_help_tables.sql",
+-                                    "share","share/mysql");  # ,"scripts"
++                                    "share","@INSTALL_MYSQLSHAREDIR@");  # ,"scripts"
+   $buildpkgdir    = $srcpkgdatadir;
+   $scriptdir      = "$opt->{basedir}/scripts";
+ }
+diff -up mariadb-10.1.19/mysql-test/mysql-test-run.pl.pbasedir mariadb-10.1.19/mysql-test/mysql-test-run.pl
+diff -up mariadb-10.1.19/scripts/mysql_install_db.sh.pbasedir mariadb-10.1.19/scripts/mysql_install_db.sh
+--- mariadb-10.1.19/scripts/mysql_install_db.sh.pbasedir	2016-12-20 14:53:05.118823806 +0100
++++ mariadb-10.1.19/scripts/mysql_install_db.sh	2016-12-20 16:35:10.888834851 +0100
+@@ -283,17 +283,17 @@ then
+     cannot_find_file mysqld $basedir/libexec $basedir/sbin $basedir/bin
+     exit 1
+   fi
+-  langdir=`find_in_basedir --dir errmsg.sys share/english share/mysql/english`
++  langdir=`find_in_basedir --dir errmsg.sys share/english @INSTALL_MYSQLSHAREDIR@/english`
+   if test -z "$langdir"
+   then
+-    cannot_find_file errmsg.sys $basedir/share/english $basedir/share/mysql/english
++    cannot_find_file errmsg.sys $basedir/share/english $basedir/@INSTALL_MYSQLSHAREDIR@/english
+     exit 1
+   fi
+-  srcpkgdatadir=`find_in_basedir --dir fill_help_tables.sql share share/mysql`
++  srcpkgdatadir=`find_in_basedir --dir fill_help_tables.sql share @INSTALL_MYSQLSHAREDIR@`
+   buildpkgdatadir=$srcpkgdatadir
+   if test -z "$srcpkgdatadir"
+   then
+-    cannot_find_file fill_help_tables.sql $basedir/share $basedir/share/mysql
++    cannot_find_file fill_help_tables.sql $basedir/share $basedir/@INSTALL_MYSQLSHAREDIR@
+     exit 1
+   fi
+   scriptdir="$basedir/scripts"
diff --git a/SOURCES/mariadb-install-test.patch b/SOURCES/mariadb-install-test.patch
new file mode 100644
index 0000000..e085599
--- /dev/null
+++ b/SOURCES/mariadb-install-test.patch
@@ -0,0 +1,55 @@
+Improve the documentation that will be installed in the mysql-test RPM.
+
+--- mariadb-10.1.13/mysql-test/README.orig	2016-03-24 10:12:10.000000000 +0100
++++ mariadb-10.1.13/mysql-test/README	2016-03-29 10:23:30.074326900 +0200
+@@ -1,15 +1,28 @@
+-This directory contains a test suite for the MySQL daemon. To run
+-the currently existing test cases, simply execute ./mysql-test-run in
+-this directory. It will fire up the newly built mysqld and test it.
+-
+-Note that you do not have to have to do "make install", and you could
+-actually have a co-existing MySQL installation. The tests will not
+-conflict with it. To run the test suite in a source directory, you
+-must do make first.
+-
+-All tests must pass. If one or more of them fail on your system, please
+-read the following manual section for instructions on how to report the
+-problem:
++This directory contains a test suite for the MariaDB daemon. To run
++the currently existing test cases, execute ./mysql-test-run in
++this directory.
++
++For use in Red Hat distributions, you should run the script as user mysql,
++who is created with nologin shell however, so the best bet is something like
++       $ su -
++       # cd /usr/share/mysql-test
++       # su -s /bin/bash mysql -c "./mysql-test-run --skip-test-list=rh-skipped-tests.list"
++
++This will use the installed mysql executables, but will run a private copy
++of the server process (using data files within /usr/share/mysql-test),
++so you need not start the mysqld service beforehand.
++
++The "--skip-test-list=rh-skipped-tests.list" option excludes tests that are
++known to fail on one or more Red-Hat-supported platforms.  You can omit it
++if you want to check whether such failures occur for you.  Documentation
++about the reasons for omitting such tests can be found in the file
++rh-skipped-tests.list.
++
++To clean up afterwards, remove the created "var" subdirectory, eg
++       # su -s /bin/bash - mysql -c "rm -rf /usr/share/mysql-test/var"
++
++If one or more tests fail on your system, please read the following manual
++section for instructions on how to report the problem:
+ 
+ https://mariadb.com/kb/en/reporting-bugs
+ 
+@@ -26,7 +39,8 @@ other relevant options.
+ 
+ With no test cases named on the command line, mysql-test-run falls back
+ to the normal "non-extern" behavior. The reason for this is that some
+-tests cannot run with an external server.
++tests cannot run with an external server (because they need to control the
++options with which the server is started).
+ 
+ You can create your own test cases. To create a test case, create a new
+ file in the t subdirectory using a text editor. The file should have a .test
diff --git a/SOURCES/mariadb-logrotate.patch b/SOURCES/mariadb-logrotate.patch
new file mode 100644
index 0000000..b0f6566
--- /dev/null
+++ b/SOURCES/mariadb-logrotate.patch
@@ -0,0 +1,72 @@
+Adjust the mysql-log-rotate script in several ways:
+
+* Use the correct log file pathname for Red Hat installations.
+* Enable creation of the log file by logrotate (needed since
+  /var/log/ isn't writable by mysql user); and set the same 640
+  permissions we normally use.
+* Comment out the actual rotation commands, so that user must edit
+  the file to enable rotation.  This is unfortunate, but the fact
+  that the script will probably fail without manual configuration
+  (to set a root password) means that we can't really have it turned
+  on by default.  Fortunately, in most configurations the log file
+  is low-volume and so rotation is not critical functionality.
+
+See discussions at RH bugs 799735, 547007
+
+
+diff -up mariadb-10.2.6/support-files/mysql-log-rotate.sh.p4 mariadb-10.2.6/support-files/mysql-log-rotate.sh
+--- mariadb-10.2.6/support-files/mysql-log-rotate.sh.p4	2017-05-15 01:13:28.000000000 +0200
++++ mariadb-10.2.6/support-files/mysql-log-rotate.sh	2017-06-18 18:42:19.930844360 +0200
+@@ -1,9 +1,9 @@
+ # This logname can be set in /etc/my.cnf
+-# by setting the variable "err-log"
+-# in the [safe_mysqld] section as follows:
++# by setting the variable "log-error"
++# in the [mysqld_safe] section as follows:
+ #
+-# [safe_mysqld]
+-# err-log=@localstatedir@/mysqld.log
++# [mysqld_safe]
++# log-error=@LOG_LOCATION@
+ #
+ # If the root user has a password you have to create a
+ # /root/.my.cnf configuration file with the following
+@@ -18,20 +18,21 @@
+ # ATTENTION: This /root/.my.cnf should be readable ONLY
+ # for root !
+ 
+-@localstatedir@/mysqld.log {
+-        # create 600 mysql mysql
+-        notifempty
+-	daily
+-        rotate 3
+-        missingok
+-        compress
+-    postrotate
+-	# just if mysqld is really running
+-	if test -x @bindir@/mysqladmin && \
+-	   @bindir@/mysqladmin ping &>/dev/null
+-	then
+-	   @bindir@/mysqladmin --local flush-error-log \
+-              flush-engine-log flush-general-log flush-slow-log
+-	fi
+-    endscript
+-}
++# To enable mysql's log file rotation, un-comment the following lines.
++#@LOG_LOCATION@ {
++#        create 640 mysql mysql
++#        notifempty
++#	daily
++#        rotate 3
++#        missingok
++#        compress
++#    postrotate
++#	# just if mysqld is really running
++#	if test -x @bindir@/mysqladmin && \
++#	   @bindir@/mysqladmin ping &>/dev/null
++#	then
++#	   @bindir@/mysqladmin --local flush-error-log \
++#              flush-engine-log flush-general-log flush-slow-log
++#	fi
++#    endscript
++#}
diff --git a/SOURCES/mariadb-noclientlib.patch b/SOURCES/mariadb-noclientlib.patch
new file mode 100644
index 0000000..43f0487
--- /dev/null
+++ b/SOURCES/mariadb-noclientlib.patch
@@ -0,0 +1,21 @@
+diff -up mariadb-10.1.11/scripts/mysql_config.sh.noclient mariadb-10.1.11/scripts/mysql_config.sh
+--- mariadb-10.1.11/scripts/mysql_config.sh.noclient	2016-02-07 14:49:15.275379972 +0100
++++ mariadb-10.1.11/scripts/mysql_config.sh	2016-02-07 14:50:26.767420573 +0100
+@@ -120,8 +120,6 @@ Usage: $0 [OPTIONS]
+ Options:
+         --cflags         [$cflags]
+         --include        [$include]
+-        --libs           [$libs]
+-        --libs_r         [$libs]
+         --plugindir      [$plugindir]
+         --socket         [$socket]
+         --port           [$port]
+@@ -141,8 +139,6 @@ while test $# -gt 0; do
+         case $1 in
+         --cflags)  echo "$cflags" ;;
+         --include) echo "$include" ;;
+-        --libs)    echo "$libs" ;;
+-        --libs_r)  echo "$libs" ;;
+         --plugindir) echo "$plugindir" ;;
+         --socket)  echo "$socket" ;;
+         --port)    echo "$port" ;;
diff --git a/SOURCES/mariadb-notestdb.patch b/SOURCES/mariadb-notestdb.patch
new file mode 100644
index 0000000..88b66fc
--- /dev/null
+++ b/SOURCES/mariadb-notestdb.patch
@@ -0,0 +1,16 @@
+diff -up mariadb-10.0.16/scripts/mysql_install_db.pl.in.createtestdb mariadb-10.0.16/scripts/mysql_install_db.pl.in
+--- mariadb-10.0.16/scripts/mysql_install_db.pl.in.createtestdb	2015-03-03 23:02:33.287620715 +0100
++++ mariadb-10.0.16/scripts/mysql_install_db.pl.in	2015-03-03 23:02:56.664641960 +0100
+@@ -399,10 +399,10 @@ if ( $opt->{'skip-name-resolve'} and $re
+ }
+ 
+ # ----------------------------------------------------------------------
+-# Create database directories mysql & test
++# Create database directories mysql
+ # ----------------------------------------------------------------------
+ 
+-foreach my $dir ( $opt->{ldata}, "$opt->{ldata}/mysql", "$opt->{ldata}/test" )
++foreach my $dir ( $opt->{ldata}, "$opt->{ldata}/mysql" )
+ {
+   # FIXME not really the same as original "mkdir -p", but ok?
+   mkdir($dir, 0700) unless -d $dir;
diff --git a/SOURCES/mariadb-ownsetup.patch b/SOURCES/mariadb-ownsetup.patch
new file mode 100644
index 0000000..893999f
--- /dev/null
+++ b/SOURCES/mariadb-ownsetup.patch
@@ -0,0 +1,31 @@
+diff -up mariadb-10.1.8/support-files/CMakeLists.txt.p9 mariadb-10.1.8/support-files/CMakeLists.txt
+--- mariadb-10.1.8/support-files/CMakeLists.txt.p9	2015-11-03 11:38:46.029139464 +0100
++++ mariadb-10.1.8/support-files/CMakeLists.txt	2015-11-03 11:41:07.107605055 +0100
+@@ -62,6 +62,7 @@ IF(UNIX)
+   ENDIF()
+ 
+   CONFIGURE_FILE(mariadb.pc.in ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc @ONLY)
++  CONFIGURE_FILE(rpm/server.cnf ${CMAKE_CURRENT_BINARY_DIR}/rpm/server.cnf @ONLY)
+   INSTALL(FILES ${CMAKE_CURRENT_BINARY_DIR}/mariadb.pc DESTINATION ${INSTALL_SHAREDIR}/pkgconfig COMPONENT Development)
+ 
+   INSTALL(FILES mysql.m4 DESTINATION ${INSTALL_SHAREDIR}/aclocal COMPONENT Development)
+diff -up mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup mariadb-10.0.15/support-files/rpm/server.cnf
+--- mariadb-10.0.15/support-files/rpm/server.cnf.ownsetup	2015-01-24 23:55:55.110063592 +0100
++++ mariadb-10.0.15/support-files/rpm/server.cnf	2015-01-24 23:57:42.308114387 +0100
+@@ -9,7 +9,16 @@
+ [server]
+ 
+ # this is only for the mysqld standalone daemon
++# Settings user and group are ignored when systemd is used.
++# If you need to run mysqld under a different user or group,
++# customize your systemd unit file for mysqld/mariadb according to the
++# instructions in http://fedoraproject.org/wiki/Systemd
+ [mysqld]
++datadir=@MYSQL_DATADIR@
++socket=@MYSQL_UNIX_ADDR@
++log-error=@LOG_LOCATION@
++pid-file=@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid
++
+ 
+ #
+ # * Galera-related settings
diff --git a/SOURCES/mariadb-scl-env-check.patch b/SOURCES/mariadb-scl-env-check.patch
new file mode 100644
index 0000000..1876293
--- /dev/null
+++ b/SOURCES/mariadb-scl-env-check.patch
@@ -0,0 +1,202 @@
+diff -up mariadb-10.2.8/scripts/mysqld_safe.sh.p90 mariadb-10.2.8/scripts/mysqld_safe.sh
+--- mariadb-10.2.8/scripts/mysqld_safe.sh.p90	2017-08-17 12:05:39.000000000 +0200
++++ mariadb-10.2.8/scripts/mysqld_safe.sh	2017-09-21 21:47:46.128058738 +0200
+@@ -11,6 +11,12 @@
+ # mysql.server works by first doing a cd to the base directory and from there
+ # executing mysqld_safe
+ 
++# we want start daemon only inside "scl enable" invocation
++if ! scl_enabled @SCL_NAME@ ; then
++    echo "Use \"scl enable @SCL_NAME@ 'service ...'\" invocation"
++    exit 1
++fi
++
+ # Initialize script globals
+ KILL_MYSQLD=1;
+ MYSQLD=
+diff -up mariadb-10.2.8/scripts/mysql.init.in.p90 mariadb-10.2.8/scripts/mysql.init.in
+--- mariadb-10.2.8/scripts/mysql.init.in.p90	2017-09-21 21:47:46.125058730 +0200
++++ mariadb-10.2.8/scripts/mysql.init.in	2017-09-21 21:50:28.505677217 +0200
+@@ -72,7 +72,7 @@ start(){
+ 	ret=0
+     else
+         @libexecdir@/mysql-check-socket || return 1
+-        su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-prepare-db-dir $MYUSER $MYGROUP" || return 4
++        su - $MYUSER -s /bin/bash -c "scl enable @SCL_NAME@ -- @libexecdir@/mysql-prepare-db-dir $MYUSER $MYGROUP" || return 4
+ 
+ 	# Pass all the options determined above, to ensure consistent behavior.
+ 	# In many cases mysqld_safe would arrive at the same conclusions anyway
+@@ -81,13 +81,13 @@ start(){
+ 	# and some users might prefer to configure logging to syslog.)
+ 	# Note: set --basedir to prevent probes that might trigger SELinux
+ 	# alarms, per bug #547485
+-	su - $MYUSER -s /bin/bash -c "$exec   --datadir='$datadir' --socket='$socketfile' \
++	su - $MYUSER -s /bin/bash -c "scl enable @SCL_NAME@ -- $exec   --datadir='$datadir' --socket='$socketfile' \
+ 		--pid-file='$pidfile' $MYSQLD_OPTS $_WSREP_NEW_CLUSTER \
+ 		--basedir=@prefix@ --user=$MYUSER" >/dev/null 2>&1 &
+ 	safe_pid=$!
+ 
+ 	# Wait until the daemon is up
+-	su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-wait-ready '$safe_pid'"
++	su - $MYUSER -s /bin/bash -c "scl enable @SCL_NAME@ -- @libexecdir@/mysql-wait-ready '$safe_pid'"
+ 	ret=$?
+ 
+ 	if [ $ret -eq 0 ]; then
+@@ -154,6 +154,18 @@ condrestart(){
+     [ -e $lockfile ] && restart || :
+ }
+ 
++# We have to re-enable SCL environment, because /sbin/service
++# clears almost all environment variables.
++# Since X_SCLS is cleared as well, we lose information about other
++# collections enabled.
++source @SCL_SCRIPTS@/service-environment
++source scl_source enable $@SCL_NAME_UPPER@_SCLS_ENABLED
++
++# we want start daemon only inside "scl enable" invocation
++if ! scl_enabled @SCL_NAME@ ; then
++    echo "Collection @SCL_NAME@ has to be listed in @SCL_SCRIPTS@/service-environment"
++    exit 1
++fi
+ 
+ # See how we were called.
+ case "$1" in
+diff -up mariadb-10.2.8/scripts/mysql_install_db.sh.p90 mariadb-10.2.8/scripts/mysql_install_db.sh
+--- mariadb-10.2.8/scripts/mysql_install_db.sh.p90	2017-09-21 21:47:46.095058650 +0200
++++ mariadb-10.2.8/scripts/mysql_install_db.sh	2017-09-21 21:47:46.129058741 +0200
+@@ -19,6 +19,12 @@
+ #
+ # All unrecognized arguments to this script are passed to mysqld.
+ 
++# we want start daemon only inside "scl enable" invocation
++if ! scl_enabled @SCL_NAME@ ; then
++    echo "Use \"scl enable @SCL_NAME@ 'service ...'\" invocation"
++    exit 1
++fi
++
+ basedir=""
+ builddir=""
+ ldata="@localstatedir@"
+@@ -480,16 +486,16 @@ else
+   echo "The problem could be conflicting information in an external"
+   echo "my.cnf files. You can ignore these by doing:"
+   echo
+-  echo "    shell> $scriptdir/scripts/mysql_install_db --defaults-file=~/.my.cnf"
++  echo "    shell> su -s /bin/bash - mysql -c 'scl enable @SCL_NAME@ -- $scriptdir/scripts/mysql_install_db --defaults-file=~/.my.cnf'"
+   echo
+   echo "You can also try to start the mysqld daemon with:"
+   echo
+-  echo "    shell> $mysqld --skip-grant --general-log &"
++  echo "    shell> su -s /bin/bash - mysql -c 'scl enable @SCL_NAME@ -- $mysqld --skip-grant --general-log &'"
+   echo
+   echo "and use the command line tool $bindir/mysql"
+   echo "to connect to the mysql database and look at the grant tables:"
+   echo
+-  echo "    shell> $bindir/mysql -u root mysql"
++  echo "    shell> scl enable @SCL_NAME@ -- $bindir/mysql -u root mysql"
+   echo "    mysql> show tables;"
+   echo
+   echo "Try 'mysqld --help' if you have problems with paths.  Using"
+@@ -509,19 +515,15 @@ fi
+ # the screen.
+ if test "$cross_bootstrap" -eq 0 && test -z "$srcdir"
+ then
+-  s_echo
+-  s_echo "To start mysqld at boot time you have to copy"
+-  s_echo "support-files/mysql.server to the right place for your system"
+-
+   echo
+   echo "PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !"
+   echo "To do so, start the server, then issue the following commands:"
+   echo
+-  echo "'$bindir/mysqladmin' -u root password 'new-password'"
+-  echo "'$bindir/mysqladmin' -u root -h $hostname password 'new-password'"
++  echo "scl enable @SCL_NAME@ -- '$bindir/mysqladmin' -u root password 'new-password'"
++  echo "scl enable @SCL_NAME@ -- '$bindir/mysqladmin' -u root -h $hostname password 'new-password'"
+   echo
+   echo "Alternatively you can run:"
+-  echo "'$bindir/mysql_secure_installation'"
++  echo "scl enable @SCL_NAME@ -- '$bindir/mysql_secure_installation'"
+   echo
+   echo "which will also give you the option of removing the test"
+   echo "databases and anonymous user created by default.  This is"
+@@ -537,7 +539,8 @@ then
+     echo "cd '$basedir' ; $bindir/mysqld_safe --datadir='$ldata'"
+     echo
+     echo "You can test the MariaDB daemon with mysql-test-run.pl"
+-    echo "cd '$basedir/mysql-test' ; perl mysql-test-run.pl"
++    echo "after installing @SCL_NAME@-mariadb-test package."
++    echo "See @prefix@/share/mysql-test/README for instructions."
+   fi
+ 
+   echo
+diff -up mariadb-10.2.8/scripts/mysql.service.in.p90 mariadb-10.2.8/scripts/mysql.service.in
+--- mariadb-10.2.8/scripts/mysql.service.in.p90	2017-09-21 21:47:46.123058725 +0200
++++ mariadb-10.2.8/scripts/mysql.service.in	2017-09-21 21:47:46.129058741 +0200
+@@ -33,14 +33,20 @@ Type=notify
+ User=mysql
+ Group=mysql
+ 
+-ExecStartPre=@libexecdir@/mysql-check-socket
++# Load collections set to enabled for this service
++EnvironmentFile=@SCL_SCRIPTS@/service-environment
++
++# We want to start server only inside "scl enable" invocation
++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- /usr/bin/scl_enabled @SCL_NAME@
++
++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-socket
+ # '%n' expands to 'Full unit name'; man systemd.unit
+-ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n
++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-prepare-db-dir %n
+ # MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
+ # Note: we set --basedir to prevent probes that might trigger SELinux alarms,
+ # per bug #547485
+-ExecStart=@libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
+-ExecStartPost=@libexecdir@/mysql-check-upgrade
++ExecStart=@libexecdir@/mysqld-scl-helper enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
++ExecStartPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-upgrade
+ 
+ # Setting this to true can break replication and the Type=notify settings
+ # See also bind-address mysqld option.
+diff -up mariadb-10.2.8/scripts/mysql@.service.in.p90 mariadb-10.2.8/scripts/mysql@.service.in
+--- mariadb-10.2.8/scripts/mysql@.service.in.p90	2017-09-21 21:47:46.125058730 +0200
++++ mariadb-10.2.8/scripts/mysql@.service.in	2017-09-21 21:47:46.129058741 +0200
+@@ -40,13 +40,19 @@ Type=notify
+ User=mysql
+ Group=mysql
+ 
+-ExecStartPre=@libexecdir@/mysql-check-socket --defaults-group-suffix=.%I
+-ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
++# Load collections set to enabled for this service
++EnvironmentFile=@SCL_SCRIPTS@/service-environment
++
++# We want to start server only inside "scl enable" invocation
++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- /usr/bin/scl_enabled @SCL_NAME@
++
++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-socket --defaults-group-suffix=.%I
++ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
+ # MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
+ # Note: we set --basedir to prevent probes that might trigger SELinux alarms,
+ # per bug #547485
+-ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
+-ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
++ExecStart=@libexecdir@/mysqld-scl-helper enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
++ExecStartPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
+ 
+ # Setting this to true can break replication and the Type=notify settings
+ # See also bind-address mysqld option.
+diff -up mariadb-10.2.8/support-files/mysql-log-rotate.sh.p90 mariadb-10.2.8/support-files/mysql-log-rotate.sh
+--- mariadb-10.2.8/support-files/mysql-log-rotate.sh.p90	2017-09-21 21:47:46.084058621 +0200
++++ mariadb-10.2.8/support-files/mysql-log-rotate.sh	2017-09-21 21:47:46.129058741 +0200
+@@ -29,9 +29,9 @@
+ #    postrotate
+ #	# just if mysqld is really running
+ #	if test -x @bindir@/mysqladmin && \
+-#	   @bindir@/mysqladmin ping &>/dev/null
++#	   /usr/bin/scl enable @SCL_NAME@ -- @bindir@/mysqladmin ping &>/dev/null
+ #	then
+-#	   @bindir@/mysqladmin --local flush-error-log \
++#	   /usr/bin/scl enable @SCL_NAME@ -- @bindir@/mysqladmin --local flush-error-log \
+ #              flush-engine-log flush-general-log flush-slow-log
+ #	fi
+ #    endscript
diff --git a/SOURCES/mariadb-scripts.patch b/SOURCES/mariadb-scripts.patch
new file mode 100644
index 0000000..72abe5e
--- /dev/null
+++ b/SOURCES/mariadb-scripts.patch
@@ -0,0 +1,43 @@
+We have some downstream patches and other scripts that include variables to
+be expanded by cmake. Cmake needs to know about them, so adding them manually.
+
+
+diff -up mariadb-10.2.8/scripts/CMakeLists.txt.p7 mariadb-10.2.8/scripts/CMakeLists.txt
+--- mariadb-10.2.8/scripts/CMakeLists.txt.p7	2017-08-28 22:35:58.589879693 +0200
++++ mariadb-10.2.8/scripts/CMakeLists.txt	2017-08-28 22:34:10.463434154 +0200
+@@ -338,6 +338,35 @@ ELSE()
+      )
+   ENDFOREACH()
+ 
++  # files for systemd
++  SET(SYSTEMD_SCRIPTS
++    mysql.tmpfiles.d
++    mysql.service
++    mysql@.service
++    mysql-prepare-db-dir
++    mysql-wait-ready
++    mysql-check-socket
++    mysql-check-upgrade
++    mysql-scripts-common
++    mysql_config_multilib
++    clustercheck
++    galera_new_cluster
++    mysql.init
++    my.cnf
++  )
++  FOREACH(file ${SYSTEMD_SCRIPTS})
++    IF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh)
++      CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.sh
++        ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY)
++    ELSEIF(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${file}.in)
++      CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${file}.in
++        ${CMAKE_CURRENT_BINARY_DIR}/${file} ESCAPE_QUOTES @ONLY)
++    ELSE()
++      MESSAGE(FATAL_ERROR "Can not find ${file}.sh or ${file}.in in "
++        "${CMAKE_CURRENT_SOURCE_DIR}" )
++    ENDIF()
++  ENDFOREACH()
++
+ ENDIF()
+ 
+ # Install libgcc as  mylibgcc.a
diff --git a/SOURCES/mariadb-server-galera.te b/SOURCES/mariadb-server-galera.te
new file mode 100644
index 0000000..bdce127
--- /dev/null
+++ b/SOURCES/mariadb-server-galera.te
@@ -0,0 +1,23 @@
+
+module mariadb-server-galera 1.0;
+
+require {
+    type mysqld_t;
+    type rsync_exec_t;
+    type anon_inodefs_t;
+    type proc_net_t;
+    type kerberos_port_t;
+    class file { read execute execute_no_trans getattr open };
+    class tcp_socket { name_bind name_connect };
+    class process { setpgid siginh rlimitinh noatsecure };
+}
+
+# allow mysqld to run rsyncd
+allow mysqld_t self:process setpgid;
+allow mysqld_t rsync_exec_t:file { read execute execute_no_trans getattr open };
+allow mysqld_t anon_inodefs_t:file getattr;
+allow mysqld_t proc_net_t:file { read open };
+
+# allow rsyncd to listen on port 4444
+allow mysqld_t kerberos_port_t:tcp_socket { name_bind name_connect };
+
diff --git a/SOURCES/mariadb-servicename.patch b/SOURCES/mariadb-servicename.patch
new file mode 100644
index 0000000..6e28974
--- /dev/null
+++ b/SOURCES/mariadb-servicename.patch
@@ -0,0 +1,11 @@
+diff -up mariadb-10.1.11/scripts/galera_new_cluster.sh.servicename mariadb-10.1.11/scripts/galera_new_cluster.sh
+--- mariadb-10.1.11/scripts/galera_new_cluster.sh.servicename	2016-02-11 13:57:39.739360761 +0100
++++ mariadb-10.1.11/scripts/galera_new_cluster.sh	2016-02-11 13:57:56.017395496 +0100
+@@ -9,6 +9,6 @@ VERSION="@VERSION@@MYSQL_SERVER_SUFFIX@"
+ COMPILATION_COMMENT="@COMPILATION_COMMENT@"
+ 
+ systemctl set-environment _WSREP_NEW_CLUSTER='--wsrep-new-cluster' && \
+-    systemctl start ${1:-mariadb}
++    systemctl start ${1:-@DAEMON_NAME@}
+ 
+ systemctl set-environment _WSREP_NEW_CLUSTER=''
diff --git a/SOURCES/mariadb-strmov.patch b/SOURCES/mariadb-strmov.patch
new file mode 100644
index 0000000..1a765c7
--- /dev/null
+++ b/SOURCES/mariadb-strmov.patch
@@ -0,0 +1,34 @@
+Remove overly optimistic definition of strmov() as stpcpy().
+
+mysql uses this macro with overlapping source and destination strings,
+which is verboten per spec, and fails on some Red Hat platforms.
+Deleting the definition is sufficient to make it fall back to a
+byte-at-a-time copy loop, which should consistently give the
+expected behavior.
+
+Note: the particular case that prompted this patch is reported and fixed
+at http://bugs.mysql.com/bug.php?id=48864.  However, my faith in upstream's
+ability to detect this type of error is low, and I also see little evidence
+of any real performance gain from optimizing these calls.  So I'm keeping
+this patch.
+
+MariaDB upstream ticket: https://jira.mariadb.org/browse/MDEV-11752
+
+diff -up mariadb-10.2.6/include/m_string.h.p1 mariadb-10.2.6/include/m_string.h
+--- mariadb-10.2.6/include/m_string.h.p1	2017-06-18 18:37:00.772596153 +0200
++++ mariadb-10.2.6/include/m_string.h	2017-06-18 18:37:42.283542656 +0200
+@@ -74,14 +74,6 @@ extern void *(*my_str_malloc)(size_t);
+ extern void *(*my_str_realloc)(void *, size_t);
+ extern void (*my_str_free)(void *);
+ 
+-#ifdef DBUG_OFF
+-#if defined(HAVE_STPCPY) && MY_GNUC_PREREQ(3, 4) && !defined(__INTEL_COMPILER)
+-#define strmov(A,B) __builtin_stpcpy((A),(B))
+-#elif defined(HAVE_STPCPY)
+-#define strmov(A,B) stpcpy((A),(B))
+-#endif
+-#endif
+-
+ /* Declared in int2str() */
+ extern const char _dig_vec_upper[];
+ extern const char _dig_vec_lower[];
diff --git a/SOURCES/my.cnf.in b/SOURCES/my.cnf.in
new file mode 100644
index 0000000..247e12d
--- /dev/null
+++ b/SOURCES/my.cnf.in
@@ -0,0 +1,18 @@
+#
+# This group is read both both by the client and the server
+# use it for options that affect everything
+#
+[client-server]
+
+#
+# This group is read by the server
+#
+[mysqld]
+# Disabling symbolic-links is recommended to prevent assorted security risks
+symbolic-links=0
+
+#
+# include all files from the config directory
+#
+!includedir @INSTALL_SYSCONF2DIR@
+
diff --git a/SOURCES/mysql-check-socket.sh b/SOURCES/mysql-check-socket.sh
new file mode 100644
index 0000000..b15cd32
--- /dev/null
+++ b/SOURCES/mysql-check-socket.sh
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# We check if there is already a process using the socket file,
+# since otherwise the systemd service file could report false
+# positive result when starting and mysqld_safe could remove
+# a socket file, which is actually being used by a different daemon.
+
+source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
+
+if test -e "$socketfile" ; then
+    echo "Socket file $socketfile exists." >&2
+
+    # no write permissions
+    if ! test -w "$socketfile" ; then
+        echo "Not enough permission to write to the socket file $socketfile, which is suspicious." >&2
+        echo "Please, remove $socketfile manually to start the service." >&2
+        exit 1
+    fi
+
+    # not a socket file
+    if ! test -S "$socketfile" ; then
+        echo "The file $socketfile is not a socket file, which is suspicious." >&2
+        echo "Please, remove $socketfile manually to start the service." >&2
+        exit 1
+    fi
+
+    # some process uses the socket file
+    if fuser "$socketfile" &>/dev/null ; then
+        socketpid=$(fuser "$socketfile" 2>/dev/null)
+        echo "Is another MySQL daemon already running with the same unix socket?" >&2
+        echo "Please, stop the process $socketpid or remove $socketfile manually to start the service." >&2
+        exit 1
+    fi
+
+    # socket file is a garbage
+    echo "No process is using $socketfile, which means it is a garbage, so it will be removed automatically." >&2
+fi
+
+exit 0
diff --git a/SOURCES/mysql-check-upgrade.sh b/SOURCES/mysql-check-upgrade.sh
new file mode 100644
index 0000000..1bfd3bc
--- /dev/null
+++ b/SOURCES/mysql-check-upgrade.sh
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
+
+upgrade_info_file="$datadir/mysql_upgrade_info"
+version=0
+# get version as integer from mysql_upgrade_info file
+if [ -f "$upgrade_info_file" ] && [ -r "$upgrade_info_file" ] ; then
+    version_major=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\1/')
+    version_minor=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\2/')
+    if [[ $version_major =~ ^[0-9]+$ ]] && [[ $version_minor =~ ^[0-9]+$ ]] ; then
+        version=$((version_major*100+version_minor))
+    fi
+fi
+
+# compute current version as integer
+thisversion=$((@MAJOR_VERSION@*100+@MINOR_VERSION@))
+
+# provide warning in cases we should run mysql_upgrade
+if [ $version -ne $thisversion ] ; then
+
+    # give extra warning if some version seems to be skipped
+    if [ $version -gt 0 ] && [ $version -lt 505 ] ; then
+        echo "The datadir located at $datadir seems to be older than of a version 5.5. Please, mind that as a general rule, to upgrade from one release series to another, go to the next series rather than skipping a series." >&2
+    fi
+
+    cat <<EOF >&2
+The datadir located at $datadir needs to be upgraded using 'mysql_upgrade' tool. This can be done using the following steps:
+
+  1. Back-up your data before with 'mysql_upgrade'
+  2. Start the database daemon using 'service @DAEMON_NAME@ start'
+  3. Run 'mysql_upgrade' with a database user that has sufficient privileges
+
+Read more about 'mysql_upgrade' usage at:
+https://mariadb.com/kb/en/mariadb/documentation/sql-commands/table-commands/mysql_upgrade/
+EOF
+fi
+
+exit 0
diff --git a/SOURCES/mysql-prepare-db-dir.sh b/SOURCES/mysql-prepare-db-dir.sh
new file mode 100644
index 0000000..785ddc2
--- /dev/null
+++ b/SOURCES/mysql-prepare-db-dir.sh
@@ -0,0 +1,137 @@
+#!/bin/sh
+
+# This script creates the mysql data directory during first service start.
+# In subsequent starts, it does nothing much.
+
+source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
+
+export LC_ALL=C
+
+# Returns content of the specified directory
+# If listing files fails, fake-file is returned so which means
+# we'll behave like there was some data initialized
+# Some files or directories are fine to be there, so those are
+# explicitly removed from the listing
+# @param <dir> datadir
+list_datadir ()
+{
+    ( ls -1A "$1" 2>/dev/null || echo "fake-file" ) | grep -v \
+    -e '^lost+found$' \
+    -e '\.err$' \
+    -e '^.bash_history$'
+}
+
+# Checks whether datadir should be initialized
+# @param <dir> datadir
+should_initialize ()
+{
+    test -z "$(list_datadir "$1")"
+}
+
+# If two args given first is user, second is group
+# otherwise the arg is the systemd service file
+if [ "$#" -eq 2 ]
+then
+    myuser="$1"
+    mygroup="$2"
+else
+    # Absorb configuration settings from the specified systemd service file,
+    # or the default service if not specified
+    SERVICE_NAME="$1"
+    if [ x"$SERVICE_NAME" = x ]
+    then
+        SERVICE_NAME=@DAEMON_NAME@.service
+    fi
+
+    myuser=`systemctl show -p User "${SERVICE_NAME}" |
+      sed 's/^User=//'`
+    if [ x"$myuser" = x ]
+    then
+        myuser=mysql
+    fi
+
+    mygroup=`systemctl show -p Group "${SERVICE_NAME}" |
+      sed 's/^Group=//'`
+    if [ x"$mygroup" = x ]
+    then
+        mygroup=mysql
+    fi
+fi
+
+# Set up the errlogfile with appropriate permissions
+if [ ! -e "$errlogfile" -a ! -h "$errlogfile" -a x$(dirname "$errlogfile") = "x/var/log" ]; then
+    case $(basename "$errlogfile") in
+        mysql*.log|mariadb*.log) install /dev/null -m0640 -o$myuser -g$mygroup "$errlogfile" ;;
+        *) ;;
+    esac
+else
+    # Provide some advice if the log file cannot be created by this script
+    errlogdir=$(dirname "$errlogfile")
+    if ! [ -d "$errlogdir" ] ; then
+        echo "The directory $errlogdir does not exist."
+        exit 1
+    elif [ -e "$errlogfile" -a ! -w "$errlogfile" ] ; then
+        echo "The log file $errlogfile cannot be written, please, fix its permissions."
+        echo "The daemon will be run under $myuser:$mygroup"
+        exit 1
+    fi
+fi
+
+# Make the data directory if doesn't exist or empty
+if should_initialize "$datadir" ; then
+    # First, make sure $datadir is there with correct permissions
+    # (note: if it's not, and we're not root, this'll fail ...)
+    if [ ! -e "$datadir" -a ! -h "$datadir" ]
+    then
+        mkdir -p "$datadir" || exit 1
+    fi
+    chown "$myuser:$mygroup" "$datadir"
+    chmod 0755 "$datadir"
+    [ -x /sbin/restorecon ] && /sbin/restorecon "$datadir"
+
+    # Now create the database
+    echo "Initializing @NICE_PROJECT_NAME@ database"
+    # Avoiding deletion of files not created by mysql_install_db is
+    # guarded by time check and sleep should help work-arounded
+    # potential issues on systems with 1 second resolution timestamps
+    # https://bugzilla.redhat.com/show_bug.cgi?id=1335849#c19
+    INITDB_TIMESTAMP=`LANG=C date -u`
+    sleep 1
+    @bindir@/mysql_install_db --rpm --datadir="$datadir" --user="$myuser"
+    ret=$?
+    if [ $ret -ne 0 ] ; then
+        echo "Initialization of @NICE_PROJECT_NAME@ database failed." >&2
+        echo "Perhaps @sysconfdir@/my.cnf is misconfigured or there is some problem with permissions of $datadir." >&2
+        # Clean up any partially-created database files
+        if [ ! -e "$datadir/mysql/user.frm" ] && [ -d "$datadir" ] ; then
+            echo "Initialization of @NICE_PROJECT_NAME@ database was not finished successfully." >&2
+            echo "Files created so far will be removed." >&2
+            find "$datadir" -mindepth 1 -maxdepth 1 -newermt "$INITDB_TIMESTAMP" \
+                 -not -name "lost+found" -exec rm -rf {} +
+            if [ $? -ne 0 ] ; then
+                echo "Removing of created files was not successfull." >&2
+                echo "Please, clean directory $datadir manually." >&2
+            fi
+        else
+            echo "However, part of data has been initialized and those will not be removed." >&2
+            echo "Please, clean directory $datadir manually." >&2
+        fi
+        exit $ret
+    fi
+    # upgrade does not need to be run on a fresh datadir
+    echo "@VERSION@-MariaDB" >"$datadir/mysql_upgrade_info"
+else
+    if [ -d "$datadir/mysql/" ] ; then
+        # mysql dir exists, it seems data are initialized properly
+        echo "Database @NICE_PROJECT_NAME@ is probably initialized in $datadir already, nothing is done."
+        echo "If this is not the case, make sure the $datadir is empty before running `basename $0`."
+    else
+        # if the directory is not empty but mysql/ directory is missing, then
+        # print error and let user to initialize manually or empty the directory
+        echo "Database @NICE_PROJECT_NAME@ is not initialized, but the directory $datadir is not empty, so initialization cannot be done."
+        echo "Make sure the $datadir is empty before running `basename $0`."
+        exit 1
+    fi
+fi
+
+exit 0
diff --git a/SOURCES/mysql-scripts-common.sh b/SOURCES/mysql-scripts-common.sh
new file mode 100644
index 0000000..e270433
--- /dev/null
+++ b/SOURCES/mysql-scripts-common.sh
@@ -0,0 +1,68 @@
+#!/bin/sh
+
+# Some useful functions used in other MySQL helper scripts
+# This scripts defines variables datadir, errlogfile, socketfile
+
+export LC_ALL=C
+
+# extract value of a MySQL option from config files
+# Usage: get_mysql_option VARNAME DEFAULT SECTION [ SECTION, ... ]
+# result is returned in $result
+# We use my_print_defaults which prints all options from multiple files,
+# with the more specific ones later; hence take the last match.
+get_mysql_option(){
+	if [ $# -ne 3 ] ; then
+		echo "get_mysql_option requires 3 arguments: section option default_value"
+		return
+	fi
+	sections="$1"
+	option_name="$2"
+	default_value="$3"
+	result=`@bindir@/my_print_defaults $my_print_defaults_extra_args $sections | sed -n "s/^--${option_name}=//p" | tail -n 1`
+	if [ -z "$result" ]; then
+	    # not found, use default
+	    result="${default_value}"
+	fi
+}
+
+# For the case of running more instances via systemd, scrits that source
+# this file can get --default-group-suffix or similar option as the first
+# argument. The utility my_print_defaults needs to use it as well, so the
+# scripts sourcing this file work with the same options as the daemon.
+my_print_defaults_extra_args=''
+while echo "$1" | grep -q '^--defaults' ; do
+	my_print_defaults_extra_args="${my_print_defaults_extra_args} $1"
+	shift
+done
+
+# Defaults here had better match what mysqld_safe will default to
+# The option values are generally defined on three important places
+# on the default installation:
+#  1) default values are hardcoded in the code of mysqld daemon or
+#     mysqld_safe script
+#  2) configurable values are defined in @sysconfdir@/my.cnf
+#  3) default values for helper scripts are specified bellow
+# So, in case values are defined in my.cnf, we need to get that value.
+# In case they are not defined in my.cnf, we need to get the same value
+# in the daemon, as in the helper scripts. Thus, default values here
+# must correspond with values defined in mysqld_safe script and source
+# code itself.
+
+server_sections="mysqld_safe mysqld server mysqld-@MAJOR_VERSION@.@MINOR_VERSION@ mariadb mariadb-@MAJOR_VERSION@.@MINOR_VERSION@ client-server"
+
+get_mysql_option "$server_sections" datadir "@MYSQL_DATADIR@"
+datadir="$result"
+
+# if there is log_error in the my.cnf, my_print_defaults still
+# returns log-error
+# log-error might be defined in mysqld_safe and mysqld sections,
+# the former has bigger priority
+get_mysql_option "$server_sections" log-error "$datadir/`uname -n`.err"
+errlogfile="$result"
+
+get_mysql_option "$server_sections" socket "@MYSQL_UNIX_ADDR@"
+socketfile="$result"
+
+get_mysql_option "$server_sections" pid-file "$datadir/`uname -n`.pid"
+pidfile="$result"
+
diff --git a/SOURCES/mysql-wait-ready.sh b/SOURCES/mysql-wait-ready.sh
new file mode 100644
index 0000000..2ed5fe1
--- /dev/null
+++ b/SOURCES/mysql-wait-ready.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+
+source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
+
+# This script waits for mysqld to be ready to accept connections
+# (which can be many seconds or even minutes after launch, if there's
+# a lot of crash-recovery work to do).
+# Running this as ExecStartPost is useful so that services declared as
+# "After mysqld" won't be started until the database is really ready.
+
+if [ $# -ne 1 ] ; then
+	echo "You need to pass daemon pid as an argument for this script."
+	exit 20
+fi
+
+# Service file passes us the daemon's PID (actually, mysqld_safe's PID)
+daemon_pid="$1"
+
+# Wait for the server to come up or for the mysqld process to disappear
+ret=0
+while /bin/true; do
+	# Check process still exists
+	if ! [ -d "/proc/${daemon_pid}" ] ; then
+	    ret=1
+	    break
+	fi
+	RESPONSE=`@bindir@/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1`
+	mret=$?
+	if [ $mret -eq 0 ] ; then
+	    break
+	fi
+	# exit codes 1, 11 (EXIT_CANNOT_CONNECT_TO_SERVICE) are expected,
+	# anything else suggests a configuration error
+	if [ $mret -ne 1 -a $mret -ne 11 ]; then
+            echo "Cannot check for @NICE_PROJECT_NAME@ Daemon startup because of mysqladmin failure." >&2
+	    ret=$mret
+	    break
+	fi
+	# "Access denied" also means the server is alive
+	echo "$RESPONSE" | grep -q "Access denied for user" && break
+
+	sleep 1
+done
+
+exit $ret
diff --git a/SOURCES/mysql.init.in b/SOURCES/mysql.init.in
new file mode 100644
index 0000000..aa3b809
--- /dev/null
+++ b/SOURCES/mysql.init.in
@@ -0,0 +1,186 @@
+#!/bin/sh
+#
+# @DAEMON_NAME@	This shell script takes care of starting and stopping
+#		the MySQL subsystem (mysqld).
+#
+# chkconfig: - 64 36
+# description:	MySQL database server.
+# processname: mysqld
+# config: @sysconfdir@/my.cnf
+# pidfile: /var/run/@DAEMON_NAME@/@DAEMON_NO_PREFIX@.pid
+### BEGIN INIT INFO
+# Provides: mysqld
+# Required-Start: $local_fs $remote_fs $network $named $syslog $time
+# Required-Stop: $local_fs $remote_fs $network $named $syslog $time
+# Short-Description: start and stop MySQL server
+# Description: MySQL database server
+### END INIT INFO
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+
+exec="@bindir@/mysqld_safe"
+prog="@DAEMON_NAME@"
+
+# Set timeouts here so they can be overridden from @sysconfdir@/sysconfig/@DAEMON_NO_PREFIX@
+STARTTIMEOUT=300
+STOPTIMEOUT=60
+
+# User and group the daemon will run under
+MYUSER=mysql
+MYGROUP=mysql
+
+# Edit the following file in order to re-write some of the environment
+# variables defined above, like $STARTTIMEOUT, $STOPTIMEOUT, $exec
+[ -e @sysconfdir@/sysconfig/@DAEMON_NO_PREFIX@ ] && . @sysconfdir@/sysconfig/@DAEMON_NO_PREFIX@
+
+lockfile=/var/lock/subsys/$prog
+
+# get options from my.cnf
+source "@libexecdir@/mysql-scripts-common"
+
+start(){
+    [ -x $exec ] || exit 5
+
+    # check permissions
+    if ! touch $(dirname $socketfile) &>/dev/null ; then
+        action $"Starting $prog: " /bin/false
+        return 4
+    fi
+
+    # check to see if it's already running
+    MYSQLDRUNNING=0
+    if [ -f "$pidfile" ]; then
+	MYSQLPID=`cat "$pidfile" 2>/dev/null`
+	if [ -n "$MYSQLPID" ] && [ -d "/proc/$MYSQLPID" ] ; then
+	    MYSQLDRUNNING=1
+	fi
+    fi
+    RESPONSE=`@bindir@/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1`
+    if [ $MYSQLDRUNNING = 1 ] && [ $? = 0 ]; then
+	# already running, do nothing
+	action $"Starting $prog: " /bin/true
+	ret=0
+    elif [ $MYSQLDRUNNING = 1 ] && echo "$RESPONSE" | grep -q "Access denied for user"
+    then
+	# already running, do nothing
+	action $"Starting $prog: " /bin/true
+	ret=0
+    else
+        @libexecdir@/mysql-check-socket || return 1
+        su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-prepare-db-dir $MYUSER $MYGROUP" || return 4
+
+	# Pass all the options determined above, to ensure consistent behavior.
+	# In many cases mysqld_safe would arrive at the same conclusions anyway
+	# but we need to be sure.  (An exception is that we don't force the
+	# log-error setting, since this script doesn't really depend on that,
+	# and some users might prefer to configure logging to syslog.)
+	# Note: set --basedir to prevent probes that might trigger SELinux
+	# alarms, per bug #547485
+	su - $MYUSER -s /bin/bash -c "$exec   --datadir='$datadir' --socket='$socketfile' \
+		--pid-file='$pidfile' $MYSQLD_OPTS $_WSREP_NEW_CLUSTER \
+		--basedir=@prefix@ --user=$MYUSER" >/dev/null 2>&1 &
+	safe_pid=$!
+
+	# Wait until the daemon is up
+	su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-wait-ready '$safe_pid'"
+	ret=$?
+
+	if [ $ret -eq 0 ]; then
+	    action $"Starting $prog: " /bin/true
+	    chmod o+r $pidfile >/dev/null 2>&1
+	    touch $lockfile
+	else
+	    action $"Starting $prog: " /bin/false
+	fi
+    fi
+    return $ret
+}
+
+stop(){
+	if [ ! -f "$pidfile" ]; then
+	    # not running; per LSB standards this is "ok"
+	    action $"Stopping $prog: " /bin/true
+	    return 0
+	fi
+	MYSQLPID=`cat "$pidfile" 2>/dev/null`
+	if [ -n "$MYSQLPID" ]; then
+	    if ! [ -d "/proc/$MYSQLPID" ] ; then
+		# process doesn't run anymore
+		action $"Stopping $prog: " /bin/true
+		return 0
+	    fi
+	    /bin/kill "$MYSQLPID" >/dev/null 2>&1
+	    ret=$?
+	    if [ $ret -eq 0 ]; then
+		TIMEOUT="$STOPTIMEOUT"
+		while [ $TIMEOUT -gt 0 ]; do
+		    /bin/kill -0 "$MYSQLPID" >/dev/null 2>&1 || break
+		    sleep 1
+		    let TIMEOUT=${TIMEOUT}-1
+		done
+		if [ $TIMEOUT -eq 0 ]; then
+		    echo "Timeout error occurred trying to stop MySQL Daemon."
+		    ret=1
+		    action $"Stopping $prog: " /bin/false
+		else
+		    rm -f $lockfile
+		    rm -f "$socketfile"
+		    action $"Stopping $prog: " /bin/true
+		fi
+	    else
+		# kill command failed, probably insufficient permissions
+		action $"Stopping $prog: " /bin/false
+		ret=4
+	    fi
+	else
+	    # failed to read pidfile, probably insufficient permissions
+	    action $"Stopping $prog: " /bin/false
+	    ret=4
+	fi
+	return $ret
+}
+ 
+restart(){
+    stop
+    start
+}
+
+condrestart(){
+    [ -e $lockfile ] && restart || :
+}
+
+
+# See how we were called.
+case "$1" in
+  start)
+    start
+    ;;
+  stop)
+    stop
+    ;;
+  status)
+    status -p "$pidfile" $prog
+    ;;
+  restart)
+    restart
+    ;;
+  condrestart|try-restart)
+    condrestart
+    ;;
+  reload)
+    exit 3
+    ;;
+  force-reload)
+    restart
+    ;;
+  *)
+    echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
+    exit 2
+esac
+
+exit $?
diff --git a/SOURCES/mysql.service.in b/SOURCES/mysql.service.in
new file mode 100644
index 0000000..8292553
--- /dev/null
+++ b/SOURCES/mysql.service.in
@@ -0,0 +1,69 @@
+# It's not recommended to modify this file in-place, because it will be
+# overwritten during package upgrades.  If you want to customize, the
+# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service",
+# containing
+#	.include /usr/lib/systemd/system/@DAEMON_NAME@.service
+#	...make your changes here...
+# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf",
+# which doesn't need to include ".include" call and which will be parsed
+# after the file @DAEMON_NAME@.service itself is parsed.
+#
+# For more info about custom unit files, see systemd.unit(5) or
+# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
+
+# For example, if you want to increase mysql's open-files-limit to 10000,
+# you need to increase systemd's LimitNOFILE setting, so create a file named
+# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing:
+#	[Service]
+#	LimitNOFILE=10000
+
+# Note: /usr/lib/... is recommended in the .include line though /lib/...
+# still works.
+# Don't forget to reload systemd daemon after you change unit configuration:
+# root> systemctl --system daemon-reload
+
+# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance.
+
+[Unit]
+Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server
+After=network.target
+
+[Service]
+Type=notify
+User=mysql
+Group=mysql
+
+ExecStartPre=@libexecdir@/mysql-check-socket
+# '%n' expands to 'Full unit name'; man systemd.unit
+ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n
+# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
+# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
+# per bug #547485
+ExecStart=@libexecdir@/mysqld --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
+ExecStartPost=@libexecdir@/mysql-check-upgrade
+
+# Setting this to true can break replication and the Type=notify settings
+# See also bind-address mysqld option.
+PrivateNetwork=false
+
+KillMode=process
+KillSignal=SIGTERM
+
+# Don't want to see an automated SIGKILL ever
+SendSIGKILL=no
+
+# Restart crashed server only, on-failure would also restart, for example, when
+# my.cnf contains unknown option
+Restart=on-abort
+RestartSec=5s
+
+UMask=007
+
+# Give a reasonable amount of time for the server to start up/shut down
+TimeoutSec=300
+
+# Place temp files in a secure directory, not /tmp
+PrivateTmp=true
+
+[Install]
+WantedBy=multi-user.target
diff --git a/SOURCES/mysql.tmpfiles.d.in b/SOURCES/mysql.tmpfiles.d.in
new file mode 100644
index 0000000..d2c4b31
--- /dev/null
+++ b/SOURCES/mysql.tmpfiles.d.in
@@ -0,0 +1 @@
+d @PID_FILE_DIR@ 0755 mysql mysql -
diff --git a/SOURCES/mysql@.service.in b/SOURCES/mysql@.service.in
new file mode 100644
index 0000000..3bf386d
--- /dev/null
+++ b/SOURCES/mysql@.service.in
@@ -0,0 +1,75 @@
+# Multi instance version of mariadb. For if you run mutiple verions at once.
+# Also used for @DAEMON_NAME@@bootstrap to bootstrap Galera.
+#
+# To use multi instance variant, use [mysqld.INSTANCENAME] as sections in my.cnf
+# and start the service via:
+#	systemctl start @DAEMON_NAME@@{instancename}.server
+#
+# It's not recommended to modify this file in-place, because it will be
+# overwritten during package upgrades.  If you want to customize, the
+# best way is to create a file "/etc/systemd/system/@DAEMON_NAME@.service",
+# containing
+#	.include /usr/lib/systemd/system/@DAEMON_NAME@.service
+#	...make your changes here...
+# or create a file "/etc/systemd/system/@DAEMON_NAME@.service.d/foo.conf",
+# which doesn't need to include ".include" call and which will be parsed
+# after the file @DAEMON_NAME@.service itself is parsed.
+#
+# For more info about custom unit files, see systemd.unit(5) or
+# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
+
+# For example, if you want to increase mysql's open-files-limit to 10000,
+# you need to increase systemd's LimitNOFILE setting, so create a file named
+# "/etc/systemd/system/@DAEMON_NAME@.service.d/limits.conf" containing:
+#	[Service]
+#	LimitNOFILE=10000
+
+# Note: /usr/lib/... is recommended in the .include line though /lib/...
+# still works.
+# Don't forget to reload systemd daemon after you change unit configuration:
+# root> systemctl --system daemon-reload
+
+# Use [mysqld.INSTANCENAME] as sections in my.cnf to configure this instance.
+
+[Unit]
+Description=@NICE_PROJECT_NAME@ @MAJOR_VERSION@.@MINOR_VERSION@ database server
+After=network.target
+
+[Service]
+Type=notify
+User=mysql
+Group=mysql
+
+ExecStartPre=@libexecdir@/mysql-check-socket --defaults-group-suffix=.%I
+ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
+# MYSQLD_OPTS here is for users to set in /etc/systemd/system/@DAEMON_NAME@@.service.d/MY_SPECIAL.conf
+# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
+# per bug #547485
+ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@ $MYSQLD_OPTS $_WSREP_NEW_CLUSTER
+ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
+
+# Setting this to true can break replication and the Type=notify settings
+# See also bind-address mysqld option.
+PrivateNetwork=false
+
+KillMode=process
+KillSignal=SIGTERM
+
+# Don't want to see an automated SIGKILL ever
+SendSIGKILL=no
+
+# Restart crashed server only, on-failure would also restart, for example, when
+# my.cnf contains unknown option
+Restart=on-abort
+RestartSec=5s
+
+UMask=007
+
+# Give a reasonable amount of time for the server to start up/shut down
+TimeoutSec=300
+
+# Place temp files in a secure directory, not /tmp
+PrivateTmp=true
+
+[Install]
+WantedBy=multi-user.target
diff --git a/SOURCES/mysql_config_multilib.sh b/SOURCES/mysql_config_multilib.sh
new file mode 100644
index 0000000..06c2a2b
--- /dev/null
+++ b/SOURCES/mysql_config_multilib.sh
@@ -0,0 +1,26 @@
+#! /bin/sh
+#
+# Wrapper script for mysql_config to support multilib
+#
+# This command respects setarch
+
+bits=$(rpm --eval %__isa_bits)
+
+case $bits in
+    32|64) status=known ;;
+        *) status=unknown ;;
+esac
+
+if [ "$status" = "unknown" ] ; then
+    echo "$0: error: command 'rpm --eval %__isa_bits' returned unknown value: $bits"
+    exit 1
+fi
+
+
+if [ -x @bindir@/mysql_config-$bits ] ; then
+    @bindir@/mysql_config-$bits "$@"
+else
+    echo "$0: error: needed binary: @bindir@/mysql_config-$bits is missing"
+    exit 1
+fi
+
diff --git a/SOURCES/rh-skipped-tests-arm.list b/SOURCES/rh-skipped-tests-arm.list
new file mode 100644
index 0000000..92d9a47
--- /dev/null
+++ b/SOURCES/rh-skipped-tests-arm.list
@@ -0,0 +1 @@
+connect.tbl_thread                           : bz#1462836
diff --git a/SOURCES/rh-skipped-tests-base.list b/SOURCES/rh-skipped-tests-base.list
new file mode 100644
index 0000000..8c2f01d
--- /dev/null
+++ b/SOURCES/rh-skipped-tests-base.list
@@ -0,0 +1,33 @@
+# failed tests tracked in bz#1462836
+
+spider/bg.spider3_fixes                      :
+spider/bg.spider3_fixes_part                 :
+spider/bg.spider_fixes                       :
+spider/bg.spider_fixes_part                  :
+spider/bg.basic_sql                          :
+spider/bg.basic_sql_part                     :
+spider/bg.direct_aggregate                   :
+spider/bg.direct_aggregate_part              :
+spider/bg.direct_update                      :
+spider/bg.direct_update_part                 :
+spider/bg.function                           :
+spider/bg.ha                                 :
+spider/bg.ha_part                            :
+spider/bg.vp_fixes                           :
+spider.spider3_fixes                         :
+spider.spider3_fixes_part                    :
+spider.spider_fixes                          :
+spider.spider_fixes_part                     :
+spider.basic_sql_part                        :
+spider.direct_aggregate                      :
+spider.direct_aggregate_part                 :
+spider.direct_update                         :
+spider.direct_update_part                    :
+spider.function                              :
+spider.ha                                    :
+spider.ha_part                               :
+spider.vp_fixes                              :
+
+perfschema.bad_option_1                      : bz#1462836
+perfschema.bad_option_5                      : bz#1462836
+
diff --git a/SOURCES/rh-skipped-tests-ppc.list b/SOURCES/rh-skipped-tests-ppc.list
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/SOURCES/rh-skipped-tests-ppc.list
diff --git a/SOURCES/rh-skipped-tests-s390.list b/SOURCES/rh-skipped-tests-s390.list
new file mode 100644
index 0000000..1f66749
--- /dev/null
+++ b/SOURCES/rh-skipped-tests-s390.list
@@ -0,0 +1,2 @@
+gcol_column_def_options_innodb          : bz#1462836
+gcol_column_def_options_myisam          : bz#1462836
diff --git a/SPECS/mariadb.spec b/SPECS/mariadb.spec
new file mode 100644
index 0000000..d963fbd
--- /dev/null
+++ b/SPECS/mariadb.spec
@@ -0,0 +1,2408 @@
+# SCL stuff
+%{?scl:%scl_package mariadb}
+%{!?scl:%global pkg_name %{name}}
+
+# Prefix that is used for patches
+%global pkgnamepatch mariadb
+
+# Regression tests may take a long time (many cores recommended), skip them by
+# passing --nocheck to rpmbuild or by setting runselftest to 0 if defining
+# --nocheck is not possible (e.g. in koji build)
+%{!?runselftest:%global runselftest 1}
+
+# Set this to 1 to see which tests fail, but 0 on production ready build
+%global ignore_testsuite_result 0
+
+# In f20+ use unversioned docdirs, otherwise the old versioned one
+%global _pkgdocdirname %{pkg_name}%{!?_pkgdocdir:-%{version}}
+%{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{pkg_name}-%{version}}
+
+# Use Full RELRO for all binaries (RHBZ#1092548)
+%global _hardened_build 1
+
+# By default, patch(1) creates backup files when chunks apply with offsets.
+# Turn that off to ensure such files don't get included in RPMs (cf bz#884755).
+%global _default_patch_flags --no-backup-if-mismatch
+
+# TokuDB engine is now part of MariaDB, but it is available only for x86_64;
+# variable tokudb allows to build with TokuDB storage engine
+# Temporarily disabled in F21+ for https://mariadb.atlassian.net/browse/MDEV-6446
+%if 0%{?scl:1}
+%bcond_with tokudb
+%else
+%ifarch x86_64
+%bcond_without tokudb
+%else
+%bcond_with tokudb
+%endif
+%endif
+
+# Mroonga engine is now part of MariaDB, but it only builds for x86_64;
+# variable mroonga allows to build with Mroonga storage engine
+%if 0%{?scl:1}
+%bcond_with mroonga
+%else
+%ifarch x86_64 i686
+%bcond_without mroonga
+%else
+%bcond_with mroonga
+%endif
+%endif
+
+# The Open Query GRAPH engine (OQGRAPH) is a computation engine allowing
+# hierarchies and more complex graph structures to be handled in a relational
+# fashion; enabled by default
+%bcond_without oqgraph
+
+# For some use cases we do not need some parts of the package
+%bcond_without devel
+%bcond_without client
+%bcond_without common
+%bcond_without errmsg
+%bcond_without bench
+%bcond_without test
+%bcond_without galera
+%bcond_without mariabackup
+%bcond_without gssapi
+
+# rocksdb currently disabled for SCL
+%ifarch x86_64 ppc64le aarch64 armv7hl
+%bcond_with    rocksdb
+%else
+%if 0%{?scl:1}
+%bcond_with    rocksdb
+%else
+%bcond_without rocksdb
+%endif
+%endif
+
+%if 0%{?scl:1}
+%bcond_with embedded
+%bcond_with clibrary
+%bcond_with connect
+%bcond_with cracklib_password_check
+%else
+%bcond_without clibrary
+%bcond_without embedded
+%bcond_without connect
+%bcond_without cracklib_password_check
+%endif
+
+# When there is already another package that ships /etc/my.cnf,
+# rather include it than ship the file again, since conflicts between
+# those files may create issues
+%bcond_without config
+
+# For deep debugging we need to build binaries with extra debug info
+%bcond_with debug
+
+# Include files for SysV init or systemd
+%if 0%{?fedora} >= 15 || 0%{?rhel} >= 7
+%bcond_without init_systemd
+%bcond_with init_sysv
+%global daemon_name %{?scl_prefix}%{pkg_name}
+%global daemon_no_prefix %{pkg_name}
+%else
+%bcond_with init_systemd
+%bcond_without init_sysv
+%global daemon_name %{?scl:%{?scl_prefix}%{pkg_name}}%{!?scl:mysqld}
+%global daemon_no_prefix %{?scl:%{pkg_name}}%{!?scl:mysqld}
+%endif
+
+# MariaDB 10.0 and later requires pcre >= 8.35, otherwise we need to use
+# the bundled library, since the package cannot be build with older version
+%global pcre_version 8.41
+%if 0%{?fedora} >= 21
+%bcond_without pcre
+%else
+%bcond_with pcre
+%endif
+
+# Define where to get propper SELinux context
+# and define names and locations specific for the whole collection
+%if 0%{?rhel} >= 7 || 0%{?fedora} >= 15
+%{?scl:%global se_daemon_source %{_unitdir}/mariadb}
+%{?scl:%global se_log_source %{?_root_localstatedir}/log/mariadb}
+%global daemondir %{_unitdir}
+%else
+%{?scl:%global se_daemon_source %{?scl:%_root_sysconfdir}%{!?scl:%_sysconfdir}/rc.d/init.d/mysqld}
+%{?scl:%global se_log_source %{?_root_localstatedir}/log/mysql}
+%global daemondir %{?scl:%_root_sysconfdir}%{!?scl:%_sysconfdir}/rc.d/init.d
+%endif
+%if ! 0%{?scl:1} || 0%{?nfsmountable:1}
+%global logfiledir %{_localstatedir}/log/mariadb
+%global dbdatadir %{_localstatedir}/lib/mysql
+%else
+%global logfiledir %{?_root_localstatedir}/log/%{?scl_prefix}mariadb
+%global dbdatadir %{?_scl_root}/var/lib/mysql
+%endif
+
+# Directory for storing pid file
+%if 0%{?rhel} == 6
+%global pidfiledir %{?scl:%{_root_localstatedir}}%{!?scl:%{_localstatedir}}/run/%{daemon_name}
+%else #RHEL 6
+%global pidfiledir %{_rundir}/%{daemon_name}
+%endif
+
+# We define some system's well known locations here so we can use them easily
+# later when building to another location (like SCL)
+%global logrotateddir %{?scl:%_root_sysconfdir}%{!?scl:%_sysconfdir}/logrotate.d
+%global logfile %{logfiledir}/%{daemon_no_prefix}.log
+
+# Home directory of mysql user should be same for all packages that create it
+%global mysqluserhome /var/lib/mysql
+
+# The evr of mysql we want to obsolete
+%if ! 0%{?scl:1}
+%global obsoleted_mysql_evr 5.6-0
+%global obsoleted_mysql_case_evr 5.5.30-5
+%endif
+
+# Provide mysql names for compatibility
+%if 0%{?scl:1}
+%bcond_with mysql_names
+%bcond_with conflicts
+%else
+%bcond_without mysql_names
+%bcond_without conflicts
+%endif
+
+# Make long macros shorter
+%global sameevr   %{epoch}:%{version}-%{release}
+%global compatver 10.2
+%global bugfixver 8
+
+%if 0%{?scl:1}
+%global scl_upper %{lua:print(string.upper(string.gsub(rpm.expand("%{scl}"), "-", "_")))}
+%endif
+
+Name:             %{?scl_prefix}mariadb
+Version:          %{compatver}.%{bugfixver}
+Release:          5%{?with_debug:.debug}%{?dist}
+Epoch:            1
+
+Summary:          A community developed branch of MySQL
+Group:            Applications/Databases
+URL:              http://mariadb.org
+# Exceptions allow client libraries to be linked with most open source SW, not only GPL code.  See README.mysql-license
+License:          GPLv2 with exceptions and LGPLv2 and BSD
+
+Source0:          https://downloads.mariadb.org/interstitial/mariadb-%{version}/source/mariadb-%{version}.tar.gz
+Source2:          mysql_config_multilib.sh
+Source3:          my.cnf.in
+Source5:          README.mysql-cnf
+Source6:          README.mysql-docs
+Source7:          README.mysql-license
+Source8:          README.mariadb-devel
+Source10:         mysql.tmpfiles.d.in
+Source11:         mysql.service.in
+Source12:         mysql-prepare-db-dir.sh
+Source13:         mysql-wait-ready.sh
+Source14:         mysql-check-socket.sh
+Source15:         mysql-scripts-common.sh
+Source16:         mysql-check-upgrade.sh
+Source18:         mysql@.service.in
+Source19:         mysql.init.in
+Source40:         daemon-scl-helper.sh
+Source50:         rh-skipped-tests-base.list
+Source51:         rh-skipped-tests-arm.list
+Source52:         rh-skipped-tests-s390.list
+Source53:         rh-skipped-tests-ppc.list
+# TODO: clustercheck contains some hard-coded paths, these should be expanded using template system
+Source70:         clustercheck.sh
+Source71:         LICENSE.clustercheck
+Source72:         mariadb-server-galera.te
+
+# Comments for these patches are in the patch files
+# Patches common for more mysql-like packages
+Patch1:           %{pkgnamepatch}-strmov.patch
+Patch2:           %{pkgnamepatch}-install-test.patch
+Patch4:           %{pkgnamepatch}-logrotate.patch
+Patch5:           %{pkgnamepatch}-file-contents.patch
+Patch7:           %{pkgnamepatch}-scripts.patch
+Patch8:           %{pkgnamepatch}-install-db-sharedir.patch
+Patch9:           %{pkgnamepatch}-ownsetup.patch
+Patch10:          %{pkgnamepatch}-noclientlib.patch
+Patch12:          %{pkgnamepatch}-admincrash.patch
+
+# Patches specific for this mysql package
+Patch30:          %{pkgnamepatch}-errno.patch
+Patch37:          %{pkgnamepatch}-notestdb.patch
+Patch38:          %{pkgnamepatch}-servicename.patch
+
+# Patches for galera
+Patch40:          %{pkgnamepatch}-galera.cnf.patch
+Patch42:          %{pkgnamepatch}-galera-new-cluster-init.patch
+Patch43:          %{pkgnamepatch}-galera-macros.patch
+
+# Patches specific for scl
+Patch90:          %{pkgnamepatch}-scl-env-check.patch
+
+BuildRequires:    cmake
+BuildRequires:    libaio-devel
+BuildRequires:    libedit-devel
+BuildRequires:    ncurses-devel
+BuildRequires:    perl
+BuildRequires:    systemtap-sdt-devel
+BuildRequires:    zlib-devel
+BuildRequires:    multilib-rpm-config
+# auth_pam.so plugin will be build if pam-devel is installed
+BuildRequires:    pam-devel
+# use either new enough version of pcre or provide bundles(pcre)
+%{?with_pcre:BuildRequires: pcre-devel >= 8.35}
+%{!?with_pcre:Provides: bundled(pcre) = %{pcre_version}}
+# Tests requires time and ps and some perl modules
+BuildRequires:    procps
+BuildRequires:    time
+BuildRequires:    perl(Env)
+BuildRequires:    perl(Exporter)
+BuildRequires:    perl(Fcntl)
+BuildRequires:    perl(File::Temp)
+BuildRequires:    perl(Data::Dumper)
+BuildRequires:    perl(Getopt::Long)
+BuildRequires:    perl(IPC::Open3)
+BuildRequires:    perl(Memoize)
+BuildRequires:    perl(Socket)
+BuildRequires:    perl(Sys::Hostname)
+BuildRequires:    perl(Test::More)
+BuildRequires:    perl(Time::HiRes)
+BuildRequires:    perl(Symbol)
+
+# for running some openssl tests rhbz#1189180
+BuildRequires:    openssl
+BuildRequires:    openssl-devel
+
+# Rocksdb requires C++11, so we need GCC 4.8 or newer
+%if 0%{?scl:1}
+%global dts devtoolset-7
+BuildRequires:    %{dts}-gcc-c++
+%endif
+
+# Mariabackup
+%if %{with mariabackup}
+BuildRequires:    libarchive-devel
+%endif
+
+# Cracklib plugin
+%if %{with cracklib_password_check}
+BuildRequires:    cracklib-dicts cracklib-devel
+%endif
+
+# gssapi plugins
+%if %{with gssapi}
+BuildRequires:    krb5-devel
+%endif
+
+%if %{with galera}
+BuildRequires:    selinux-policy-devel
+%endif
+
+%if %{with init_systemd}
+BuildRequires: systemd systemd-devel
+%endif
+
+Requires:         bash
+Requires:         fileutils
+Requires:         grep
+Requires:         %{name}-common%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+
+%if %{with mysql_names}
+Provides:         mysql = %{sameevr}
+Provides:         mysql%{?_isa} = %{sameevr}
+Provides:         mysql-compat-client = %{sameevr}
+Provides:         mysql-compat-client%{?_isa} = %{sameevr}
+%endif
+
+# MySQL (with caps) is upstream's spelling of their own RPMs for mysql
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL < %{obsoleted_mysql_case_evr}}
+%{?obsoleted_mysql_evr:Obsoletes: mysql < %{obsoleted_mysql_evr}}
+%{?with_conflicts:Conflicts:        community-mysql}
+
+# Filtering: https://fedoraproject.org/wiki/Packaging:AutoProvidesAndRequiresFiltering
+%if 0%{?fedora} > 14 || 0%{?rhel} > 6
+%global __requires_exclude ^perl\\((hostnames|lib::mtr|lib::v1|mtr_|My::)
+%global __provides_exclude_from ^(%{_datadir}/(mysql|mysql-test)/.*|%{_libdir}/mysql/plugin/.*\\.so)$
+%else
+%filter_from_requires /perl(\(hostnames\|lib::mtr\|lib::v1\|mtr_\|My::\)/d
+%filter_provides_in -P (%{_datadir}/(mysql|mysql-test)/.*|%{_libdir}/mysql/plugin/.*\.so)
+%filter_setup
+%endif
+
+# Define license macro if not present
+%{!?_licensedir:%global license %doc}
+
+%description
+MariaDB is a community developed branch of MySQL.
+MariaDB is a multi-user, multi-threaded SQL database server.
+It is a client/server implementation consisting of a server daemon (mysqld)
+and many different client programs and libraries. The base package
+contains the standard MariaDB/MySQL client programs and generic MySQL files.
+
+
+%if %{with clibrary}
+%package          libs
+Summary:          The shared libraries required for MariaDB/MySQL clients
+Group:            Applications/Databases
+Requires:         %{name}-common%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+%if %{with mysql_names}
+Provides:         mysql-libs = %{sameevr}
+Provides:         mysql-libs%{?_isa} = %{sameevr}
+%endif
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-libs < %{obsoleted_mysql_case_evr}}
+%{?obsoleted_mysql_evr:Obsoletes: mysql-libs < %{obsoleted_mysql_evr}}
+
+%description      libs
+The mariadb-libs package provides the essential shared libraries for any
+MariaDB/MySQL client program or interface. You will need to install this
+package to use any other MariaDB package or any clients that need to connect
+to a MariaDB/MySQL server. MariaDB is a community developed branch of MySQL.
+%endif
+
+
+%if %{with config}
+%package          config
+Summary:          The config files required by server and client
+Group:            Applications/Databases
+%{?scl:Requires:%scl_runtime}
+
+%description      config
+The package provides the config file my.cnf and my.cnf.d directory used by any
+MariaDB or MySQL program. You will need to install this package to use any
+other MariaDB or MySQL package if the config files are not provided in the
+package itself.
+%endif
+
+
+%if %{with common}
+%package          common
+Summary:          The shared files required by server and client
+Group:            Applications/Databases
+Requires:         %{_sysconfdir}/my.cnf
+%{?scl:Requires:%scl_runtime}
+
+%description      common
+The package provides the essential shared files for any MariaDB program.
+You will need to install this package to use any other MariaDB package.
+%endif
+
+
+%if %{with errmsg}
+%package          errmsg
+Summary:          The error messages files required by server and embedded
+Group:            Applications/Databases
+Requires:         %{name}-common%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+
+%description      errmsg
+The package provides error messages files for the MariaDB daemon and the
+embedded server. You will need to install this package to use any of those
+MariaDB packages.
+%endif
+
+
+%if %{with galera}
+%package          server-galera
+Summary:          The configuration files and scripts for galera replication
+Group:            Applications/Databases
+Requires:         %{name}-common%{?_isa} = %{sameevr}
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+Requires:         %{name}-backup%{?_isa} = %{sameevr}
+Requires:         %{?scl_prefix}galera >= 25.3.3
+Requires(post):   libselinux-utils
+Requires(post):   policycoreutils-python
+%{?scl:Requires:%scl_runtime}
+
+%description      server-galera
+MariaDB is a multi-user, multi-threaded SQL database server. It is a
+client/server implementation consisting of a server daemon (mysqld)
+and many different client programs and libraries. This package contains
+the MariaDB server and some accompanying files and directories.
+MariaDB is a community developed branch of MySQL.
+%endif
+
+
+%package          server
+Summary:          The MariaDB server and related files
+Group:            Applications/Databases
+
+# note: no version here = %%{version}-%%{release}
+%if %{with mysql_names}
+Requires:         mysql-compat-client%{?_isa}
+Requires:         mysql%{?_isa}
+%else
+Requires:         %{name}%{?_isa}
+%endif
+Requires:         %{name}-common%{?_isa} = %{sameevr}
+Requires:         %{name}-errmsg%{?_isa} = %{sameevr}
+Requires:         %{name}-server-utils%{?_isa} = %{sameevr}
+Requires:         %{_sysconfdir}/my.cnf
+Requires:         %{_sysconfdir}/my.cnf.d
+Requires:         coreutils
+# for fuser in mysql-check-socket
+Requires:         psmisc
+Requires(pre):    /usr/sbin/useradd
+%if %{with init_systemd}
+# We require this to be present for %%{_tmpfilesdir}
+Requires:         systemd
+# Make sure it's there when scriptlets run, too
+Requires(pre):    systemd
+Requires(posttrans): systemd
+%{?systemd_requires: %systemd_requires}
+%endif
+%{?scl:Requires(post): policycoreutils policycoreutils-python libselinux-utils}
+# mysqlhotcopy needs DBI/DBD support
+Requires:         perl(DBI)
+Requires:         perl(DBD::mysql)
+%{?scl:Requires:%scl_runtime}
+%{?scl:Requires:%{_root_bindir}/scl_source}
+# wsrep requirements
+Requires:         lsof
+Requires:         net-tools
+Requires:         coreutils
+Requires:         rsync
+%if %{with mysql_names}
+Provides:         mysql-server = %{sameevr}
+Provides:         mysql-server%{?_isa} = %{sameevr}
+Provides:         mysql-compat-server = %{sameevr}
+Provides:         mysql-compat-server%{?_isa} = %{sameevr}
+%endif
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-server < %{obsoleted_mysql_case_evr}}
+%{?with_conflicts:Conflicts:        community-mysql-server}
+%{?with_conflicts:Conflicts:        mariadb-galera-server}
+%{?obsoleted_mysql_evr:Obsoletes: mysql-server < %{obsoleted_mysql_evr}}
+
+%description      server
+MariaDB is a multi-user, multi-threaded SQL database server. It is a
+client/server implementation consisting of a server daemon (mysqld)
+and many different client programs and libraries. This package contains
+the MariaDB server and some accompanying files and directories.
+MariaDB is a community developed branch of MySQL.
+
+
+%if %{with oqgraph}
+%package          oqgraph-engine
+Summary:          The Open Query GRAPH engine for MariaDB
+Group:            Applications/Databases
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+# boost and Judy required for oograph
+%if 0%{?fedora} >= 15 || 0%{?rhel} >= 7
+BuildRequires:    boost-devel
+%else
+BuildRequires:    %{?scl_prefix}boost-devel
+%endif
+BuildRequires:    %{?scl_prefix}Judy-devel
+
+%description      oqgraph-engine
+The package provides Open Query GRAPH engine (OQGRAPH) as plugin for MariaDB
+database server. OQGRAPH is a computation engine allowing hierarchies and more
+complex graph structures to be handled in a relational fashion. In a nutshell,
+tree structures and friend-of-a-friend style searches can now be done using
+standard SQL syntax, and results joined onto other tables.
+%endif
+
+
+%if %{with connect}
+%package          connect-engine
+Summary:          The CONNECT storage engine for MariaDB
+Group:            Applications/Databases
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+
+%description      connect-engine
+The CONNECT storage engine enables MariaDB to access external local or
+remote data (MED). This is done by defining tables based on different data
+types, in particular files in various formats, data extracted from other DBMS
+or products (such as Excel), or data retrieved from the environment
+(for example DIR, WMI, and MAC tables).
+%endif
+
+
+%if %{with mariabackup}
+%package          backup
+Summary:          The mariabackup tool for physical online backups
+Group:            Applications/Databases
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+
+%description      backup
+MariaDB Backup is an open source tool provided by MariaDB for performing
+physical online backups of InnoDB, Aria and MyISAM tables.
+For InnoDB, "hot online" backups are possible.
+%endif
+
+
+%if %{with cracklib_password_check}
+%package          cracklib-password-check
+Summary:          The password strength checking plugin
+Group:            Applications/Databases
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+
+%description      cracklib-password-check
+CrackLib is a password strength checking library. It is installed by default
+in many Linux distributions and is invoked automatically (by pam_cracklib.so)
+whenever the user login password is modified.
+Now, with the cracklib_password_check password validation plugin, one can
+also use it to check MariaDB account passwords.
+%endif
+
+
+%if %{with gssapi}
+%package          gssapi-client
+Summary:          GSSAPI authentication plugin for client
+Group:            Applications/Databases
+Requires:         %{name}%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+
+%description      gssapi-client
+GSSAPI authentication client-side plugin for MariaDB for passwordless login.
+This plugin includes support for Kerberos on Unix.
+
+
+%package          gssapi-server
+Summary:          GSSAPI authentication plugin for server
+Group:            Applications/Databases
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+
+%description      gssapi-server
+GSSAPI authentication server-side plugin for MariaDB for passwordless login.
+This plugin includes support for Kerberos on Unix.
+%endif
+
+
+%package          server-utils
+Summary:          Non-essential server utilities for MariaDB/MySQL applications
+Group:            Applications/Databases
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+%if %{with mysql_names}
+Provides:         mysql-perl = %{sameevr}
+%endif
+# mysqlhotcopy needs DBI/DBD support
+Requires:         perl(DBI) perl(DBD::mysql)
+%{?scl:Requires:%scl_runtime}
+
+%description      server-utils
+This package contains all non-essential server utilities and scripts for managing
+databases. It also contains all utilities requiring Perl and it is the only MariaDB
+subpackage, except test subpackage, that depends on Perl.
+
+
+%if %{with devel}
+%package          devel
+Summary:          Files for development of MariaDB/MySQL applications
+Group:            Applications/Databases
+%{?with_clibrary:Requires:         %{name}-libs%{?_isa} = %{sameevr}}
+Requires:         openssl-devel%{?_isa}
+%{?scl:Requires:%scl_runtime}
+%if %{with mysql_names}
+Provides:         mysql-devel = %{sameevr}
+Provides:         mysql-devel%{?_isa} = %{sameevr}
+%endif
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-devel < %{obsoleted_mysql_case_evr}}
+%{?obsoleted_mysql_evr:Obsoletes: mysql-devel < %{obsoleted_mysql_evr}}
+%{?with_conflicts:Conflicts:        community-mysql-devel}
+
+%description      devel
+MariaDB is a multi-user, multi-threaded SQL database server. This
+package contains the libraries and header files that are needed for
+developing MariaDB/MySQL client applications.
+MariaDB is a community developed branch of MySQL.
+%endif
+
+
+%if %{with embedded}
+%package          embedded
+Summary:          MariaDB as an embeddable library
+Group:            Applications/Databases
+Requires:         %{name}-common%{?_isa} = %{sameevr}
+Requires:         %{name}-errmsg%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+%if %{with mysql_names}
+Provides:         mysql-embedded = %{sameevr}
+Provides:         mysql-embedded%{?_isa} = %{sameevr}
+%endif
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-embedded < %{obsoleted_mysql_case_evr}}
+%{?obsoleted_mysql_evr:Obsoletes: mysql-embedded < %{obsoleted_mysql_evr}}
+
+%description      embedded
+MariaDB is a multi-user, multi-threaded SQL database server. This
+package contains a version of the MariaDB server that can be embedded
+into a client application instead of running as a separate process.
+MariaDB is a community developed branch of MySQL.
+
+
+%package          embedded-devel
+Summary:          Development files for MariaDB as an embeddable library
+Group:            Applications/Databases
+Requires:         %{name}-embedded%{?_isa} = %{sameevr}
+Requires:         %{name}-devel%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+# embedded-devel should require libaio-devel (rhbz#1290517)
+Requires:         libaio-devel
+%if %{with mysql_names}
+Provides:         mysql-embedded-devel = %{sameevr}
+Provides:         mysql-embedded-devel%{?_isa} = %{sameevr}
+%endif
+%{?with_conflicts:Conflicts:        community-mysql-embedded-devel}
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-embedded-devel < %{obsoleted_mysql_case_evr}}
+%{?obsoleted_mysql_evr:Obsoletes: mysql-embedded-devel < %{obsoleted_mysql_evr}}
+
+%description      embedded-devel
+MariaDB is a multi-user, multi-threaded SQL database server. This
+package contains files needed for developing and testing with
+the embedded version of the MariaDB server.
+MariaDB is a community developed branch of MySQL.
+%endif
+
+
+%if %{with bench}
+%package          bench
+Summary:          MariaDB benchmark scripts and data
+Group:            Applications/Databases
+Requires:         %{name}%{?_isa} = %{sameevr}
+%{?scl:Requires:%scl_runtime}
+%if %{with mysql_names}
+Provides:         mysql-bench = %{sameevr}
+Provides:         mysql-bench%{?_isa} = %{sameevr}
+%endif
+%{?with_conflicts:Conflicts:        community-mysql-bench}
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-bench < %{obsoleted_mysql_case_evr}}
+%{?obsoleted_mysql_evr:Obsoletes: mysql-bench < %{obsoleted_mysql_evr}}
+
+%description      bench
+MariaDB is a multi-user, multi-threaded SQL database server. This
+package contains benchmark scripts and data for use when benchmarking
+MariaDB.
+MariaDB is a community developed branch of MySQL.
+%endif
+
+
+%if %{with test}
+%package          test
+Summary:          The test suite distributed with MariaDB
+Group:            Applications/Databases
+Requires:         %{name}%{?_isa} = %{sameevr}
+Requires:         %{name}-common%{?_isa} = %{sameevr}
+Requires:         %{name}-server%{?_isa} = %{sameevr}
+Requires:         perl(Env)
+Requires:         perl(Exporter)
+Requires:         perl(Fcntl)
+Requires:         perl(File::Temp)
+Requires:         perl(Data::Dumper)
+Requires:         perl(Getopt::Long)
+Requires:         perl(IPC::Open3)
+Requires:         perl(Socket)
+Requires:         perl(Sys::Hostname)
+Requires:         perl(Test::More)
+Requires:         perl(Time::HiRes)
+%{?scl:Requires:%scl_runtime}
+%{?with_conflicts:Conflicts:        community-mysql-test}
+%if %{with mysql_names}
+Provides:         mysql-test = %{sameevr}
+Provides:         mysql-test%{?_isa} = %{sameevr}
+%endif
+%{?obsoleted_mysql_case_evr:Obsoletes: MySQL-test < %{obsoleted_mysql_case_evr}}
+%{?obsoleted_mysql_evr:Obsoletes: mysql-test < %{obsoleted_mysql_evr}}
+
+%description      test
+MariaDB is a multi-user, multi-threaded SQL database server. This
+package contains the regression test suite distributed with
+the MariaDB sources.
+MariaDB is a community developed branch of MySQL.
+%endif
+
+%if 0%{?scl:1}
+%scl_syspaths_package -d
+%scl_syspaths_package config -d
+%scl_syspaths_package backup -d
+%scl_syspaths_package server -d
+%scl_syspaths_package server-utils -d
+%scl_syspaths_package server-galera -d
+%endif
+
+%prep
+%setup -q -n mariadb-%{version}
+
+# Removt JAR files that upstream puts into tarball
+find . -name "*.jar" -type f -exec rm --verbose -f {} \;
+
+%patch1 -p1
+%patch2 -p1
+%patch4 -p1
+%patch5 -p1
+%patch7 -p1
+%patch8 -p1
+%patch9 -p1
+%patch10 -p1
+%patch12 -p1
+%patch30 -p1
+%patch37 -p1
+%patch38 -p1
+%patch40 -p1
+%if %{without init_systemd}
+%patch42 -p1
+%endif
+%patch43 -p1
+
+# workaround for upstream bug #56342
+rm mysql-test/t/ssl_8k_key-master.opt
+
+# generate a list of tests that fail, but are not disabled by upstream
+cat %{SOURCE50} | tee -a mysql-test/unstable-tests
+
+# disable some tests failing on different architectures
+%ifarch %{arm} aarch64
+cat %{SOURCE51} | tee -a mysql-test/unstable-tests
+%endif
+
+%ifarch s390 s390x
+cat %{SOURCE52} | tee -a mysql-test/unstable-tests
+%endif
+
+%ifarch ppc ppc64 ppc64p7 ppc64le
+cat %{SOURCE53} | tee -a mysql-test/unstable-tests
+%endif
+
+cp %{SOURCE2} %{SOURCE3} %{SOURCE10} %{SOURCE11} %{SOURCE12} %{SOURCE13} \
+   %{SOURCE14} %{SOURCE15} %{SOURCE16} %{SOURCE18} %{SOURCE19} \
+   %{SOURCE70} scripts
+
+%if 0%{?scl:1}
+%patch90 -p1
+%endif
+
+%if %{with galera}
+# prepare selinux policy
+mkdir selinux
+sed 's/mariadb-server-galera/%{name}-server-galera/' %{SOURCE72} > selinux/%{name}-server-galera.te
+%if 0%{?rhel} == 6
+sed -i 's/kerberos_port_t/kerberos_master_port_t/' selinux/%{name}-server-galera.te
+%endif
+cat selinux/%{name}-server-galera.te
+%endif
+
+# Check if PCRE version is actual
+%{!?with_pcre:
+pcre_maj=`grep '^m4_define(pcre_major' pcre/configure.ac | sed -r 's/^m4_define\(pcre_major, \[([0-9]+)\]\)/\1/'`
+pcre_min=`grep '^m4_define(pcre_minor' pcre/configure.ac | sed -r 's/^m4_define\(pcre_minor, \[([0-9]+)\]\)/\1/'`
+
+if [ %{pcre_version} != "$pcre_maj.$pcre_min" ]
+then
+  echo "\n Error: PCRE version is outdated. \n\tIncluded version:%{pcre_version} \n\tUpstream version: $pcre_maj.$pcre_min\n"
+  exit 1
+fi
+}
+
+%if %{without rocksdb}
+rm -r storage/rocksdb/
+%endif
+
+%build
+
+# fail quickly and obviously if user tries to build as root
+%if %runselftest
+    if [ x"$(id -u)" = "x0" ]; then
+        echo "mysql's regression tests fail if run as root."
+        echo "If you really need to build the RPM as root, use"
+        echo "--nocheck to skip the regression tests."
+        exit 1
+    fi
+%endif
+
+%{?scl:scl enable %{scl} %{?dts} - << "EOF"}
+set -ex
+CFLAGS="%{optflags} -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE"
+# force PIC mode so that we can build libmysqld.so
+CFLAGS="$CFLAGS -fPIC"
+# gcc seems to have some bugs on sparc as of 4.4.1, back off optimization; rhbz#529298
+%ifarch sparc sparcv9 sparc64
+CFLAGS=`echo $CFLAGS| sed -e "s|-O2|-O1|g" `
+%endif
+# significant performance gains can be achieved by compiling with -O3 optimization; rhbz#1051069
+%ifarch ppc64
+CFLAGS=`echo $CFLAGS| sed -e "s|-O2|-O3|g" `
+%endif
+CXXFLAGS="$CFLAGS"
+export CFLAGS CXXFLAGS
+
+%if 0%{?_hardened_build}
+# building with PIE
+LDFLAGS="$LDFLAGS -pie -Wl,-z,relro,-z,now"
+export LDFLAGS
+%endif
+
+# The INSTALL_xxx macros have to be specified relative to CMAKE_INSTALL_PREFIX
+# so we can't use %%{_datadir} and so forth here.
+%cmake . \
+         -DBUILD_CONFIG=mysql_release \
+         -DFEATURE_SET="community" \
+         -DINSTALL_LAYOUT=RPM \
+         -DDAEMON_NAME="%{daemon_name}" \
+         -DDAEMON_NO_PREFIX="%{daemon_no_prefix}" \
+%if 0%{?scl:1}
+         -DSCL_NAME="%{?scl}" \
+         -DSCL_NAME_UPPER="%{?scl_upper}" \
+         -DSCL_SCRIPTS="%{?_scl_scripts}" \
+%endif
+         -DLOG_LOCATION="%{logfile}" \
+         -DPID_FILE_DIR="%{pidfiledir}" \
+         -DNICE_PROJECT_NAME="MariaDB" \
+         -DRPM="%{?rhel:rhel%{rhel}}%{!?rhel:fedora%{fedora}}" \
+         -DCMAKE_INSTALL_PREFIX="%{_prefix}" \
+         -DINSTALL_SYSCONFDIR="%{_sysconfdir}" \
+         -DINSTALL_SYSCONF2DIR="%{_sysconfdir}/my.cnf.d" \
+         -DINSTALL_DOCDIR="share/doc/%{_pkgdocdirname}" \
+         -DINSTALL_DOCREADMEDIR="share/doc/%{_pkgdocdirname}" \
+         -DINSTALL_INCLUDEDIR=include/mysql \
+         -DINSTALL_INFODIR=share/info \
+         -DINSTALL_LIBDIR="%{_lib}/mysql" \
+         -DINSTALL_MANDIR=share/man \
+         -DINSTALL_MYSQLSHAREDIR=share/%{pkg_name} \
+         -DINSTALL_MYSQLTESTDIR=share/mysql-test \
+         -DINSTALL_PLUGINDIR="%{_lib}/mysql/plugin" \
+         -DINSTALL_SBINDIR=libexec \
+         -DINSTALL_SCRIPTDIR=bin \
+         -DINSTALL_SQLBENCHDIR=share \
+         -DINSTALL_SUPPORTFILESDIR=share/%{pkg_name} \
+         -DMYSQL_DATADIR="%{dbdatadir}" \
+         -DMYSQL_UNIX_ADDR="/var/lib/mysql/mysql.sock" \
+         -DENABLED_LOCAL_INFILE=ON \
+         -DENABLE_DTRACE=OFF \
+         -DWITH_EMBEDDED_SERVER=ON \
+         -DWITH_SSL=system \
+         -DWITH_ZLIB=system \
+%{?with_pcre: -DWITH_PCRE=system}\
+         -DWITH_JEMALLOC=no \
+         -DWITH_LIBARCHIVE=ON \
+         -DWITH_MARIABACKUP=ON \
+%{!?with_tokudb: -DWITHOUT_TOKUDB=ON}\
+%{!?with_mroonga: -DWITHOUT_MROONGA=ON}\
+%{!?with_oqgraph: -DWITHOUT_OQGRAPH=ON}\
+         -DCONNECT_WITH_MONGO=OFF \
+         -DCONNECT_WITH_JDBC=OFF \
+         -DTMPDIR=/var/tmp \
+%{?with_debug: -DCMAKE_BUILD_TYPE=Debug}\
+%{?_hardened_build: -DWITH_MYSQLD_LDFLAGS="-pie -Wl,-z,relro,-z,now"}
+
+make %{?_smp_mflags} VERBOSE=1
+%{?scl:EOF}
+
+# debuginfo extraction scripts fail to find source files in their real
+# location -- satisfy them by copying these files into location, which
+# is expected by scripts
+for e in innobase xtradb ; do
+  for f in pars0grm.y pars0lex.l ; do
+    cp -p "storage/$e/pars/$f" "storage/$e/$f"
+  done
+done
+
+# build selinux policy
+%if %{with galera}
+pushd selinux
+make -f /usr/share/selinux/devel/Makefile %{name}-server-galera.pp
+%endif
+
+%install
+%{?scl:scl enable %{scl} %{?dts} - << "EOF"}
+set -ex
+make DESTDIR=%{buildroot} install
+%{?scl:EOF}
+
+# multilib support for shell scripts
+# we only apply this to known Red Hat multilib arches, per bug #181335
+if %multilib_capable; then
+  cp scripts/mysql_config_multilib scripts/mariadb_config_multilib
+fi
+
+# remove mysql_config and link to mariadb_config instead
+rm %{buildroot}%{_bindir}/mysql_config
+ln -s mariadb_config %{buildroot}%{_bindir}/mysql_config
+ln -s mysql_config.1.gz %{buildroot}%{_mandir}/man1/mariadb_config.1.gz
+
+# Upstream install this into arch-independent directory
+mkdir -p %{buildroot}/%{_libdir}/pkgconfig
+mv %{buildroot}/%{_datadir}/pkgconfig/*.pc %{buildroot}/%{_libdir}/pkgconfig
+
+# install INFO_SRC, INFO_BIN into libdir (upstream thinks these are doc files,
+# but that's pretty wacko --- see also %%{name}-file-contents.patch)
+install -p -m 644 Docs/INFO_SRC %{buildroot}%{_libdir}/mysql/
+install -p -m 644 Docs/INFO_BIN %{buildroot}%{_libdir}/mysql/
+rm -r %{buildroot}%{_datadir}/doc/%{_pkgdocdirname}/MariaDB-server-%{version}/
+
+mkdir -p %{buildroot}%{logfiledir}
+chmod 0750 %{buildroot}%{logfiledir}
+touch %{buildroot}%{logfile}
+
+mkdir -p %{buildroot}%{pidfiledir}
+install -p -m 0755 -d %{buildroot}%{dbdatadir}
+
+# create directory for socket
+%{?scl:install -p -m 0755 -d %{buildroot}/var/lib/mysql}
+
+%if %{with config}
+install -D -p -m 0644 scripts/my.cnf %{buildroot}%{_sysconfdir}/my.cnf
+%else
+rm %{buildroot}%{_sysconfdir}/my.cnf.d/mysql-clients.cnf
+rm %{buildroot}%{_sysconfdir}/my.cnf
+%endif
+
+# use different config file name for each variant of server
+mv %{buildroot}%{_sysconfdir}/my.cnf.d/server.cnf %{buildroot}%{_sysconfdir}/my.cnf.d/%{pkg_name}-server.cnf
+
+# install systemd unit files and scripts for handling server startup
+%if %{with init_systemd}
+install -D -p -m 644 scripts/mysql.service %{buildroot}%{_unitdir}/%{daemon_name}.service
+install -D -p -m 644 scripts/mysql@.service %{buildroot}%{_unitdir}/%{daemon_name}@.service
+install -D -p -m 0644 scripts/mysql.tmpfiles.d %{buildroot}%{_tmpfilesdir}/%{name}.conf
+%endif
+
+# install SysV init script
+%if %{with init_sysv}
+install -D -p -m 755 scripts/mysql.init %{buildroot}%{daemondir}/%{daemon_name}
+%endif
+
+# helper scripts for service starting
+install -p -m 755 scripts/mysql-prepare-db-dir %{buildroot}%{_libexecdir}/mysql-prepare-db-dir
+install -p -m 755 scripts/mysql-check-socket %{buildroot}%{_libexecdir}/mysql-check-socket
+install -p -m 755 scripts/mysql-check-upgrade %{buildroot}%{_libexecdir}/mysql-check-upgrade
+install -p -m 644 scripts/mysql-scripts-common %{buildroot}%{_libexecdir}/mysql-scripts-common
+%if %{with init_sysv}
+install -p -m 755 scripts/mysql-wait-ready %{buildroot}%{_libexecdir}/mysql-wait-ready
+%endif
+
+# daemon helper for fixing SELinux in systemd
+%if %{with init_systemd} && 0%{?scl:1}
+install -p -m 755 %{SOURCE40} %{buildroot}%{_libexecdir}/mysqld-scl-helper
+%endif
+
+# install selinux policy
+%if %{with galera}
+install -p -m 644 -D selinux/%{name}-server-galera.pp %{buildroot}%{_datadir}/selinux/packages/%{name}/%{name}-server-galera.pp
+%endif
+
+# mysql-test includes one executable that doesn't belong under /usr/share,
+# so move it and provide a symlink
+mv %{buildroot}%{_datadir}/mysql-test/lib/My/SafeProcess/my_safe_process %{buildroot}%{_bindir}
+ln -s ../../../../../bin/my_safe_process %{buildroot}%{_datadir}/mysql-test/lib/My/SafeProcess/my_safe_process
+
+# should move this to /etc/ ?
+rm %{buildroot}%{_bindir}/mysql_embedded
+rm %{buildroot}%{_libdir}/mysql/*.a
+rm %{buildroot}%{_datadir}/%{pkg_name}/binary-configure
+rm %{buildroot}%{_datadir}/%{pkg_name}/magic
+rm %{buildroot}%{_datadir}/%{pkg_name}/my-*.cnf
+rm %{buildroot}%{_datadir}/%{pkg_name}/mysql.server
+rm %{buildroot}%{_datadir}/%{pkg_name}/mysqld_multi.server
+rm %{buildroot}%{_mandir}/man1/mysql-stress-test.pl.1*
+rm %{buildroot}%{_mandir}/man1/mysql-test-run.pl.1*
+rm %{buildroot}%{_bindir}/mytop
+
+# put logrotate script where it needs to be
+mkdir -p %{buildroot}%{logrotateddir}
+mv %{buildroot}%{_datadir}/%{pkg_name}/mysql-log-rotate %{buildroot}%{logrotateddir}/%{daemon_name}
+chmod 644 %{buildroot}%{logrotateddir}/%{daemon_name}
+
+%if %{with clibrary} && 0%{!?scl:1}
+mkdir -p %{buildroot}%{_sysconfdir}/ld.so.conf.d
+echo "%{_libdir}/mysql" > %{buildroot}%{_sysconfdir}/ld.so.conf.d/%{name}-%{_arch}.conf
+%endif
+
+# copy additional docs into build tree so %%doc will find them
+install -p -m 0644 %{SOURCE5} %{basename:%{SOURCE5}}
+install -p -m 0644 %{SOURCE6} %{basename:%{SOURCE6}}
+install -p -m 0644 %{SOURCE7} %{basename:%{SOURCE7}}
+install -p -m 0644 %{SOURCE8} %{basename:%{SOURCE8}}
+install -p -m 0644 %{SOURCE16} %{basename:%{SOURCE16}}
+install -p -m 0644 %{SOURCE71} %{basename:%{SOURCE71}}
+
+# install galera config file
+sed -i -r 's|^wsrep_provider=none|wsrep_provider=%{_libdir}/galera/libgalera_smm.so|' support-files/wsrep.cnf
+install -p -m 0644 support-files/wsrep.cnf %{buildroot}%{_sysconfdir}/my.cnf.d/galera.cnf
+
+# install the clustercheck script
+mkdir -p %{buildroot}%{_sysconfdir}/sysconfig
+touch %{buildroot}%{_sysconfdir}/sysconfig/clustercheck
+install -p -m 0755 scripts/clustercheck %{buildroot}%{_bindir}/clustercheck
+
+# install the galera_new_cluster script anyway
+%if %{without init_systemd}
+install -p -m 0755 scripts/galera_new_cluster %{buildroot}%{_bindir}/galera_new_cluster
+%endif
+
+# remove SysV init script and a symlink to that
+rm %{buildroot}%{_sysconfdir}/init.d/mysql
+rm %{buildroot}%{_libexecdir}/rcmysql
+
+# for SCL we do not want unprefixed service file
+%if 0%{?scl:1} && %{with init_systemd}
+rm %{buildroot}%{_unitdir}/mariadb.service
+%endif
+
+# remove duplicate logrotate script
+rm %{buildroot}%{_sysconfdir}/logrotate.d/mysql
+
+# rename the wsrep README so it corresponds with the other README names
+cp Docs/README-wsrep Docs/README.wsrep
+
+# Remove AppArmor files
+rm -r %{buildroot}%{_datadir}/%{pkg_name}/policy/apparmor
+
+# Remove service file from upstream
+%if %{with init_systemd}
+rm -r %{buildroot}%{_datadir}/%{pkg_name}/systemd
+%endif
+
+# install the list of skipped tests to be available for user runs
+install -p -m 0644 mysql-test/unstable-tests %{buildroot}%{_datadir}/mysql-test
+ln -s unstable-tests %{buildroot}%{_datadir}/mysql-test/rh-skipped-tests.list
+
+%if %{without clibrary}
+%{!?scl: rm -r %{buildroot}%{_sysconfdir}/ld.so.conf.d}
+unlink %{buildroot}%{_libdir}/mysql/libmariadb.so
+rm %{buildroot}%{_libdir}/mysql/libmariadb*.so.*
+rm %{buildroot}%{_sysconfdir}/my.cnf.d/client.cnf
+unlink %{buildroot}%{_libdir}/mysql/libmysqlclient.so
+unlink %{buildroot}%{_libdir}/mysql/libmysqlclient_r.so
+%endif
+
+%if %{without embedded}
+rm %{buildroot}%{_libdir}/mysql/libmysqld.so*
+rm %{buildroot}%{_bindir}/{mysql_client_test_embedded,mysqltest_embedded}
+rm %{buildroot}%{_mandir}/man1/{mysql_client_test_embedded,mysqltest_embedded}.1*
+%endif
+
+%if %{without devel}
+unlink %{buildroot}%{_bindir}/mysql_config
+rm %{buildroot}%{_bindir}/mariadb_config
+rm -r %{buildroot}%{_includedir}/mysql
+rm %{buildroot}%{_datadir}/aclocal/mysql.m4
+rm %{buildroot}%{_libdir}/pkgconfig/mariadb.pc
+rm %{buildroot}%{_mandir}/man1/mysql_config.1*
+unlink %{buildroot}%{_mandir}/man1/mariadb_config.1*
+%endif
+
+%if %{without client}
+rm %{buildroot}%{_bindir}/{msql2mysql,mysql,mysql_find_rows,\
+mysql_plugin,mysql_waitpid,mysqlaccess,mysqladmin,mysqlbinlog,mysqlcheck,\
+mysqldump,mysqlimport,mysqlshow,mysqlslap,my_print_defaults}
+rm %{buildroot}%{_mandir}/man1/{msql2mysql,mysql,mysql_find_rows,\
+mysql_plugin,mysql_waitpid,mysqlaccess,mysqladmin,mysqlbinlog,mysqlcheck,\
+mysqldump,mysqlimport,mysqlshow,mysqlslap,my_print_defaults}.1*
+%endif
+
+%if %{without connect}
+rm %{buildroot}%{_sysconfdir}/my.cnf.d/connect.cnf
+%endif
+
+%if %{without oqgraph}
+rm %{buildroot}%{_sysconfdir}/my.cnf.d/oqgraph.cnf
+%endif
+
+%if %{without mariabackup}
+rm %{buildroot}%{_bindir}/mariabackup
+rm %{buildroot}%{_bindir}/mbstream
+%endif
+
+%if %{without tokudb}
+%ifarch x86_64
+%if 0%{!?scl:1}
+rm %{buildroot}%{_bindir}/tokuftdump
+rm %{buildroot}%{_bindir}/tokuft_logprint
+%endif
+%endif
+# because upstream ships manpages for tokudb even on architectures that tokudb doesn't support
+rm %{buildroot}%{_mandir}/man1/tokuftdump.1*
+rm %{buildroot}%{_mandir}/man1/tokuft_logdump.1*
+%endif
+
+%if %{without config}
+rm %{buildroot}%{_sysconfdir}/my.cnf
+rm %{buildroot}%{_sysconfdir}/my.cnf.d/mysql-clients.cnf
+%endif
+
+%if %{without common}
+rm -r %{buildroot}%{_datadir}/%{pkg_name}/charsets
+%endif
+
+%if %{without errmsg}
+rm %{buildroot}%{_datadir}/%{pkg_name}/errmsg-utf8.txt
+rm -r %{buildroot}%{_datadir}/%{pkg_name}/{english,czech,danish,dutch,estonian,\
+french,german,greek,hungarian,italian,japanese,korean,norwegian,norwegian-ny,\
+polish,portuguese,romanian,russian,serbian,slovak,spanish,swedish,ukrainian}
+%endif
+
+%if %{without bench}
+rm -r %{buildroot}%{_datadir}/sql-bench
+%endif
+
+%if %{without test}
+rm %{buildroot}%{_bindir}/{mysql_client_test,my_safe_process}
+rm -r %{buildroot}%{_datadir}/mysql-test
+rm %{buildroot}%{_mandir}/man1/mysql_client_test.1*
+%endif
+
+%if 0%{?scl:1}
+# generate a configuration file for daemon
+cat << EOF | tee -a %{buildroot}%{?_scl_scripts}/service-environment
+# Services are started in a fresh environment without any influence of user's
+# environment (like environment variable values). As a consequence,
+# information of all enabled collections will be lost during service start up.
+# If user needs to run a service under any software collection enabled, this
+# collection has to be written into %{scl_upper}_SCLS_ENABLED variable 
+# in %{?_scl_scripts}/service-environment.
+%{scl_upper}_SCLS_ENABLED="%{scl}"
+EOF
+
+# clear *.lst files, so it the spec works with --short-circuit RPM option
+# otherwise we'd have the content repeated
+rm -f *.lst
+
+# Creating syspath without prefix for mariadb-config package
+%scl_syspaths_install_wrapper -n mariadb-config -m link %{_sysconfdir}/my.cnf %{_root_sysconfdir}/%{scl_prefix}my.cnf
+%scl_syspaths_install_wrapper -n mariadb-config -m link %{_sysconfdir}/my.cnf.d %{_root_sysconfdir}/%{scl_prefix}my.cnf.d
+
+# Creating syspath without prefix for mariadb package
+mariadb_binaries='msql2mysql my_print_defaults mysql mysql_find_rows mysql_plugin
+mysql_waitpid mysqlaccess mysqladmin mysqlbinlog mysqlcheck mysqldump
+mysqlimport mysqlshow mysqlslap'
+
+%scl_syspaths_install_wrappers -n mariadb -m script -p bin $mariadb_binaries
+
+mans= ; for bin in $mariadb_binaries; do mans+=" man1/$bin.1.gz" ; done
+%scl_syspaths_install_wrappers -n mariadb -m link -p man $mans
+
+# Creating syspath without prefix for mariadb-server package
+mariadb_server_binaries='aria_chk aria_dump_log aria_ftdump aria_pack
+aria_read_log innochecksum myisam_ftdump myisamchk myisamlog
+myisampack mysql_install_db mysql_secure_installation mysql_tzinfo_to_sql mysql_upgrade
+mysqld_safe mysqld_safe_helper replace resolve_stack_dump resolveip
+wsrep_sst_common wsrep_sst_mysqldump wsrep_sst_rsync
+wsrep_sst_xtrabackup wsrep_sst_xtrabackup-v2'
+
+mariadb_backup_binaries_no_man='wsrep_sst_mariabackup mariabackup mbstream'
+
+%scl_syspaths_install_wrappers -n mariadb-server -m script -p bin $mariadb_server_binaries
+%scl_syspaths_install_wrappers -n mariadb-backup -m script -p bin $mariadb_backup_binaries_no_man
+
+mans= ; for bin in $mariadb_server_binaries; do mans+=" man1/$bin.1.gz" ; done
+%scl_syspaths_install_wrappers -n mariadb-server -m link -p man $mans
+
+%scl_syspaths_install_wrapper -n mariadb-server -m link %{logfiledir} %{_root_localstatedir}/log/%{scl_prefix}mariadb
+%scl_syspaths_install_wrapper -n mariadb-server -m link %{dbdatadir} %{_root_localstatedir}/lib/%{scl_prefix}mysql
+
+%if %{with init_systemd}
+%scl_syspaths_install_wrapper -n mariadb-server -m link %{_unitdir}/%{daemon_name}.service %{_unitdir}/%{daemon_no_prefix}.service
+%scl_syspaths_install_wrapper -n mariadb-server -m link %{_unitdir}/%{daemon_name}@.service %{_unitdir}/%{daemon_no_prefix}@.service
+%endif
+
+%if %{with init_sysv}
+%scl_syspaths_install_wrapper -n mariadb-server -m link %{daemondir}/%{daemon_name} %{daemondir}/%{daemon_no_prefix}
+%endif
+
+# Creating syspath without prefix for mariadb-server-utils package
+mariadb_server_utils_binaries='
+mysql_convert_table_format mysql_fix_extensions mysql_setpermission
+mysqldumpslow mysqld_multi mysqlhotcopy mysqltest perror'
+
+%scl_syspaths_install_wrappers -n mariadb-server-utils -m script -p bin $mariadb_server_utils_binaries
+
+mans= ; for bin in $mariadb_server_utils_binaries; do mans+=" man1/$bin.1.gz" ; done
+%scl_syspaths_install_wrappers -n mariadb-server-utils -m link -p man $mans
+
+# Creating syspath without prefix for mariadb-server-galera package
+mariadb_server_galera_binaries='galera_new_cluster'
+%if %{with init_systemd}
+mariadb_server_galera_binaries+=' galera_recovery'
+%endif
+mariadb_server_galera_binaries_no_man='clustercheck'
+
+%scl_syspaths_install_wrappers -n mariadb-server-galera -m script -p bin $mariadb_server_galera_binaries
+%scl_syspaths_install_wrappers -n mariadb-server-galera -m script -p bin $mariadb_server_galera_binaries_no_man
+
+mans= ; for bin in $mariadb_server_galera_binaries; do mans+=" man1/$bin.1.gz" ; done
+%scl_syspaths_install_wrappers -n mariadb-server-galera -m link -p man $mans
+
+%endif #scl
+
+
+%check
+%if %{with test}
+%if %runselftest
+%{?scl:scl enable %{scl} %{?dts} - << "EOF"}
+set -ex
+
+# hack to let 32- and 64-bit tests run concurrently on same build machine
+export MTR_PARALLEL=1
+# builds might happen at the same host, avoid collision
+export MTR_BUILD_THREAD=%{__isa_bits}
+
+# The cmake build scripts don't provide any simple way to control the
+# options for mysql-test-run, so ignore the make target and just call it
+# manually.  Nonstandard options chosen are:
+# --force to continue tests after a failure
+# no retries please
+# skip tests that are listed in rh-skipped-tests.list
+# avoid redundant test runs with --binlog-format=mixed
+# increase timeouts to prevent unwanted failures during mass rebuilds
+(
+  set -ex
+  # avoid https://mariadb.atlassian.net/browse/MDEV-7454
+  %{?with_init_sysv:export LD_LIBRARY_PATH=$(pwd)/libmariadb/unittest/mytap:$(pwd)/libmariadb/unittest/libmariadb:$(pwd)/unittest/mytap${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}}
+  cd mysql-test
+  perl ./mysql-test-run.pl --force --retry=0 \
+    --suite-timeout=720 --testcase-timeout=30 \
+    --mysqld=--binlog-format=mixed --force-restart \
+    --shutdown-timeout=60 --max-test-fail=0 \
+%if %{ignore_testsuite_result}
+    || :
+%else
+    --skip-test-list=unstable-tests
+%endif
+  # cmake build scripts will install the var cruft if left alone :-(
+  rm -rf var
+)
+%{?scl:EOF}
+%endif
+%endif
+
+%pre server
+/usr/sbin/groupadd -g 27 -o -r mysql >/dev/null 2>&1 || :
+/usr/sbin/useradd -M -N -g mysql -o -r -d %{mysqluserhome} -s /sbin/nologin \
+  -c "MySQL Server" -u 27 mysql >/dev/null 2>&1 || :
+
+%if %{with clibrary}
+%post libs -p /sbin/ldconfig
+%endif
+
+%if %{with embedded}
+%post embedded -p /sbin/ldconfig
+%endif
+
+%if %{with galera}
+%post server-galera
+# Do what README at support-files/policy/selinux/README and upstream page
+# http://galeracluster.com/documentation-webpages/firewallsettings.html recommend:
+semanage port -a -t mysqld_port_t -p tcp 4568 >/dev/null 2>&1 || :
+semanage port -a -t mysqld_port_t -p tcp 4567 >/dev/null 2>&1 || :
+semanage port -a -t mysqld_port_t -p udp 4567 >/dev/null 2>&1 || :
+semodule -i %{_datadir}/selinux/packages/%{name}/%{name}-server-galera.pp >/dev/null 2>&1 || :
+%endif
+
+%post server
+%if 0%{?scl:1}
+semanage fcontext -a -e "%{se_daemon_source}" "%{daemondir}/%{daemon_name}%{?with_init_systemd:.service}" >/dev/null 2>&1 || :
+semanage fcontext -a -t mysqld_var_run_t "%{pidfiledir}" >/dev/null 2>&1 || :
+%if %{with init_systemd}
+# work-around for rhbz#1172683
+semanage fcontext -a -t mysqld_exec_t %{_root_libexecdir}/mysqld-scl-helper >/dev/null 2>&1 || :
+%endif
+# work-around for rhbz#1464803
+semanage fcontext -a -t mysqld_exec_t %{_root_bindir}/mysqld_safe_helper >/dev/null 2>&1 || :
+selinuxenabled && load_policy || :
+restorecon -R "%{?_scl_root}/" >/dev/null 2>&1 || :
+restorecon -R "%{_sysconfdir}" >/dev/null 2>&1 || :
+restorecon -R "%{_localstatedir}" >/dev/null 2>&1 || :
+restorecon -R "%{daemondir}/%{daemon_name}%{?with_init_systemd:.service}" >/dev/null 2>&1 || :
+restorecon -R "%{pidfiledir}" >/dev/null 2>&1 || :
+%endif
+%if %{with init_systemd}
+%systemd_post %{daemon_name}.service
+%endif
+%if %{with init_sysv}
+if [ $1 = 1 ]; then
+    /sbin/chkconfig --add %{daemon_name}
+fi
+%endif
+
+%preun server
+%if %{with init_systemd}
+%systemd_preun %{daemon_name}.service
+%endif
+%if %{with init_sysv}
+if [ $1 = 0 ]; then
+    /sbin/service %{daemon_name} stop >/dev/null 2>&1
+    /sbin/chkconfig --del %{daemon_name}
+fi
+%endif
+
+%if %{with clibrary}
+%postun libs -p /sbin/ldconfig
+%endif
+
+%if %{with embedded}
+%postun embedded -p /sbin/ldconfig
+%endif
+
+%if %{with galera}
+%postun server-galera
+if [ $1 -eq 0 ]; then
+    semodule -r %{name}-server-galera 2>/dev/null || :
+fi
+%endif
+
+%postun server
+%if %{with init_systemd}
+%systemd_postun_with_restart %{daemon_name}.service
+%endif
+%if %{with init_sysv}
+if [ $1 -ge 1 ]; then
+    /sbin/service %{daemon_name} condrestart >/dev/null 2>&1 || :
+fi
+%endif
+
+%if %{with client}
+%files
+%{_bindir}/msql2mysql
+%{_bindir}/mysql
+%{_bindir}/mysql_find_rows
+%{_bindir}/mysql_plugin
+%{_bindir}/mysql_waitpid
+%{_bindir}/mysqlaccess
+%{_bindir}/mysqladmin
+%{_bindir}/mysqlbinlog
+%{_bindir}/mysqlcheck
+%{_bindir}/mysqldump
+%{_bindir}/mysqlimport
+%{_bindir}/mysqlshow
+%{_bindir}/mysqlslap
+%{_bindir}/my_print_defaults
+
+%{_mandir}/man1/msql2mysql.1*
+%{_mandir}/man1/mysql.1*
+%{_mandir}/man1/mysql_find_rows.1*
+%{_mandir}/man1/mysql_plugin.1*
+%{_mandir}/man1/mysql_waitpid.1*
+%{_mandir}/man1/mysqlaccess.1*
+%{_mandir}/man1/mysqladmin.1*
+%{_mandir}/man1/mysqlbinlog.1*
+%{_mandir}/man1/mysqlcheck.1*
+%{_mandir}/man1/mysqldump.1*
+%{_mandir}/man1/mysqlimport.1*
+%{_mandir}/man1/mysqlshow.1*
+%{_mandir}/man1/mysqlslap.1*
+%{_mandir}/man1/my_print_defaults.1*
+%endif
+
+%if %{with clibrary}
+%files libs
+%{_libdir}/mysql/libmariadb.so.*
+%{_libdir}/mysql/libmysqlclient.so.18
+%{!?scl: %{_sysconfdir}/ld.so.conf.d/*}
+%config(noreplace) %{_sysconfdir}/my.cnf.d/client.cnf
+%endif
+
+%if %{with config}
+%files config
+# although the default my.cnf contains only server settings, we put it in the
+# common package because it can be used for client settings too.
+%dir %{_sysconfdir}/my.cnf.d
+%config(noreplace) %{_sysconfdir}/my.cnf
+%config(noreplace) %{_sysconfdir}/my.cnf.d/mysql-clients.cnf
+%config(noreplace) %{_sysconfdir}/my.cnf.d/enable_encryption.preset
+%endif
+
+%if %{with common}
+%files common
+%doc COPYING COPYING.thirdparty README.md README.mysql-license README.mysql-docs README.mariadb-devel
+%doc storage/innobase/COPYING.Percona storage/innobase/COPYING.Google
+%doc %{_datadir}/doc/%{_pkgdocdirname}
+%dir %{_libdir}/mysql
+%dir %{_libdir}/mysql/plugin
+%dir %{_datadir}/%{pkg_name}
+%{_libdir}/mysql/plugin/dialog.so
+%{_libdir}/mysql/plugin/mysql_clear_password.so
+%{_datadir}/%{pkg_name}/charsets
+%endif
+
+%if %{with errmsg}
+%files errmsg
+%{_datadir}/%{pkg_name}/errmsg-utf8.txt
+%{_datadir}/%{pkg_name}/english
+%lang(cs) %{_datadir}/%{pkg_name}/czech
+%lang(da) %{_datadir}/%{pkg_name}/danish
+%lang(nl) %{_datadir}/%{pkg_name}/dutch
+%lang(et) %{_datadir}/%{pkg_name}/estonian
+%lang(fr) %{_datadir}/%{pkg_name}/french
+%lang(de) %{_datadir}/%{pkg_name}/german
+%lang(el) %{_datadir}/%{pkg_name}/greek
+%lang(hi) %{_datadir}/%{pkg_name}/hindi
+%lang(hu) %{_datadir}/%{pkg_name}/hungarian
+%lang(it) %{_datadir}/%{pkg_name}/italian
+%lang(ja) %{_datadir}/%{pkg_name}/japanese
+%lang(ko) %{_datadir}/%{pkg_name}/korean
+%lang(no) %{_datadir}/%{pkg_name}/norwegian
+%lang(no) %{_datadir}/%{pkg_name}/norwegian-ny
+%lang(pl) %{_datadir}/%{pkg_name}/polish
+%lang(pt) %{_datadir}/%{pkg_name}/portuguese
+%lang(ro) %{_datadir}/%{pkg_name}/romanian
+%lang(ru) %{_datadir}/%{pkg_name}/russian
+%lang(sr) %{_datadir}/%{pkg_name}/serbian
+%lang(sk) %{_datadir}/%{pkg_name}/slovak
+%lang(es) %{_datadir}/%{pkg_name}/spanish
+%lang(sv) %{_datadir}/%{pkg_name}/swedish
+%lang(uk) %{_datadir}/%{pkg_name}/ukrainian
+%endif
+
+%if %{with galera}
+%files server-galera
+%doc Docs/README.wsrep
+%doc LICENSE.clustercheck
+%{_bindir}/clustercheck
+%{_bindir}/galera_new_cluster
+%if %{with init_systemd}
+%{_bindir}/galera_recovery
+%endif
+%config(noreplace) %{_sysconfdir}/my.cnf.d/galera.cnf
+%attr(0640,root,root) %ghost %config(noreplace) %{_sysconfdir}/sysconfig/clustercheck
+%dir %{_datadir}/selinux/packages/%{name}
+%{_datadir}/selinux/packages/%{name}/%{name}-server-galera.pp
+%{_mandir}/man1/galera_new_cluster.1.*
+%{_mandir}/man1/galera_recovery.1.*
+%endif
+
+%files server
+%doc README.mysql-cnf
+
+%{_bindir}/aria_chk
+%{_bindir}/aria_dump_log
+%{_bindir}/aria_ftdump
+%{_bindir}/aria_pack
+%{_bindir}/aria_read_log
+%if %{with init_systemd}
+%{_bindir}/mariadb-service-convert
+%endif
+%{_bindir}/myisamchk
+%{_bindir}/myisam_ftdump
+%{_bindir}/myisamlog
+%{_bindir}/myisampack
+%{_bindir}/mysql_install_db
+%{_bindir}/mysql_secure_installation
+%{_bindir}/mysql_tzinfo_to_sql
+%{_bindir}/mysqld_safe
+%{_bindir}/mysqld_safe_helper
+%{_bindir}/innochecksum
+%{_bindir}/replace
+%{_bindir}/resolve_stack_dump
+%{_bindir}/resolveip
+%{_bindir}/wsrep_sst_common
+%{_bindir}/wsrep_sst_mariabackup
+%{_bindir}/wsrep_sst_mysqldump
+%{_bindir}/wsrep_sst_rsync
+%{_bindir}/wsrep_sst_xtrabackup
+%{_bindir}/wsrep_sst_xtrabackup-v2
+%{?with_tokudb:%{_bindir}/tokuftdump}
+%{?with_tokudb:%{_bindir}/tokuft_logprint}
+
+%config(noreplace) %{_sysconfdir}/my.cnf.d/%{pkg_name}-server.cnf
+%{?with_tokudb:%config(noreplace) %{_sysconfdir}/my.cnf.d/tokudb.cnf}
+
+# RocksDB engine
+%if %{with rocksdb}
+%config(noreplace) %{_sysconfdir}/my.cnf.d/rocksdb.cnf
+%{_bindir}/mysql_ldb
+%{_bindir}/sst_dump
+%endif
+
+%{_libexecdir}/mysqld
+%if %{with init_systemd} && 0%{?scl:1}
+%{_libexecdir}/mysqld-scl-helper
+%endif
+
+%{_libdir}/mysql/INFO_SRC
+%{_libdir}/mysql/INFO_BIN
+%if %{without common}
+%dir %{_datadir}/%{pkg_name}
+%endif
+
+%{_libdir}/mysql/plugin/*
+%{?with_oqgraph:%exclude %{_libdir}/mysql/plugin/ha_oqgraph.so}
+%{?with_connect:%exclude %{_libdir}/mysql/plugin/ha_connect.so}
+%exclude %{_libdir}/mysql/plugin/dialog.so
+%exclude %{_libdir}/mysql/plugin/mysql_clear_password.so
+%{?with_gssapi:%exclude %{_libdir}/mysql/plugin/auth_gssapi.so}
+%{?with_gssapi:%exclude %{_libdir}/mysql/plugin/auth_gssapi_client.so}
+%{?with_cracklib_password_check:%exclude %{_libdir}/mysql/plugin/cracklib_password_check.so}
+
+%{_mandir}/man1/aria_chk.1*
+%{_mandir}/man1/aria_dump_log.1*
+%{_mandir}/man1/aria_ftdump.1*
+%{_mandir}/man1/aria_pack.1*
+%{_mandir}/man1/aria_read_log.1*
+%{_mandir}/man1/mariadb-service-convert.1*
+%{_mandir}/man1/myisamchk.1*
+%{_mandir}/man1/myisamlog.1*
+%{_mandir}/man1/myisampack.1*
+%{_mandir}/man1/myisam_ftdump.1*
+%{_mandir}/man1/mysql.server.1*
+%{_mandir}/man1/mysql_install_db.1*
+%{_mandir}/man1/mysql_secure_installation.1*
+%{_mandir}/man1/mysql_tzinfo_to_sql.1*
+%{_mandir}/man1/mysqld_safe.1*
+%{_mandir}/man1/mysqld_safe_helper.1*
+%{_mandir}/man1/my_safe_process.1*
+%{_mandir}/man1/innochecksum.1*
+%{_mandir}/man1/replace.1*
+%{_mandir}/man1/resolveip.1*
+%{_mandir}/man1/resolve_stack_dump.1*
+%{_mandir}/man8/mysqld.8*
+%{?with_tokudb:%{_mandir}/man1/tokuftdump.1*}
+%{?with_tokudb:%{_mandir}/man1/tokuft_logdump.1*}
+%{_mandir}/man1/wsrep_sst_common.1*
+%{_mandir}/man1/wsrep_sst_mysqldump.1*
+%{_mandir}/man1/wsrep_sst_rsync.1*
+%{_mandir}/man1/wsrep_sst_xtrabackup.1*
+%{_mandir}/man1/wsrep_sst_xtrabackup-v2.1*
+
+%{_datadir}/%{pkg_name}/fill_help_tables.sql
+%{_datadir}/%{pkg_name}/install_spider.sql
+%{_datadir}/%{pkg_name}/maria_add_gis_sp.sql
+%{_datadir}/%{pkg_name}/maria_add_gis_sp_bootstrap.sql
+%{_datadir}/%{pkg_name}/mysql_system_tables.sql
+%{_datadir}/%{pkg_name}/mysql_system_tables_data.sql
+%{_datadir}/%{pkg_name}/mysql_test_data_timezone.sql
+%{_datadir}/%{pkg_name}/mysql_to_mariadb.sql
+%{_datadir}/%{pkg_name}/mysql_performance_tables.sql
+%{?with_mroonga:%{_datadir}/%{pkg_name}/mroonga/install.sql}
+%{?with_mroonga:%{_datadir}/%{pkg_name}/mroonga/uninstall.sql}
+%{_datadir}/%{pkg_name}/wsrep.cnf
+%{_datadir}/%{pkg_name}/wsrep_notify
+%dir %{_datadir}/%{pkg_name}/policy
+%dir %{_datadir}/%{pkg_name}/policy/selinux
+%{_datadir}/%{pkg_name}/policy/selinux/README
+%{_datadir}/%{pkg_name}/policy/selinux/mariadb-server.*
+%{_datadir}/%{pkg_name}/policy/selinux/mariadb.*
+
+%{daemondir}/%{daemon_name}*
+%{_libexecdir}/mysql-prepare-db-dir
+%{_libexecdir}/mysql-check-socket
+%{_libexecdir}/mysql-check-upgrade
+%{_libexecdir}/mysql-scripts-common
+%if %{with init_sysv}
+%{_libexecdir}/mysql-wait-ready
+%endif
+
+%{?with_init_systemd:%{_tmpfilesdir}/%{name}.conf}
+%attr(0755,mysql,mysql) %dir %{pidfiledir}
+%attr(0755,mysql,mysql) %dir %{dbdatadir}
+%{?scl:%attr(0755,mysql,mysql) %dir /var/lib/mysql}
+%attr(0750,mysql,mysql) %dir %{logfiledir}
+%attr(0640,mysql,mysql) %config %ghost %verify(not md5 size mtime) %{logfile}
+%config(noreplace) %{logrotateddir}/%{daemon_name}
+
+%{?scl:%config(noreplace) %{?_scl_scripts}/service-environment}
+
+%if %{with oqgraph}
+%files oqgraph-engine
+%config(noreplace) %{_sysconfdir}/my.cnf.d/oqgraph.cnf
+%{_libdir}/mysql/plugin/ha_oqgraph.so
+%endif
+
+%if %{with connect}
+%files connect-engine
+%config(noreplace) %{_sysconfdir}/my.cnf.d/connect.cnf
+%{_libdir}/mysql/plugin/ha_connect.so
+%endif
+
+%if %{with mariabackup}
+%files backup
+%{_bindir}/mariabackup
+%{_bindir}/mbstream
+%endif
+
+%if %{with cracklib_password_check}
+%files cracklib-password-check
+%{_libdir}/mysql/plugin/cracklib_password_check.so
+%endif
+
+%if %{with gssapi}
+%files gssapi-client
+%{_libdir}/mysql/plugin/auth_gssapi_client.so
+
+%files gssapi-server
+%config(noreplace) %{_sysconfdir}/my.cnf.d/auth_gssapi.cnf
+%{_libdir}/mysql/plugin/auth_gssapi.so
+%endif
+
+%files server-utils
+# Perl utilities
+%{_bindir}/mysql_convert_table_format
+%{_bindir}/mysql_fix_extensions
+%{_bindir}/mysql_setpermission
+%{_bindir}/mysqldumpslow
+%{_bindir}/mysqld_multi
+%{_bindir}/mysqlhotcopy
+%{_mandir}/man1/mysql_convert_table_format.1*
+%{_mandir}/man1/mysql_fix_extensions.1*
+%{_mandir}/man1/mysqldumpslow.1*
+%{_mandir}/man1/mysqld_multi.1*
+%{_mandir}/man1/mysqlhotcopy.1*
+%{_mandir}/man1/mysql_setpermission.1*
+# Utilities that can be used remotely
+%{_bindir}/mysql_upgrade
+%{_bindir}/mysqltest
+%{_bindir}/perror
+%{_mandir}/man1/mysql_upgrade.1*
+%{_mandir}/man1/mysqltest.1*
+%{_mandir}/man1/perror.1*
+
+%if %{with devel}
+%files devel
+%{_bindir}/mysql_config*
+%{_bindir}/mariadb_config*
+%{_includedir}/mysql
+%{_datadir}/aclocal/mysql.m4
+%{_libdir}/pkgconfig/mariadb.pc
+%if %{with clibrary}
+%{_libdir}/mysql/libmariadb.so
+%{_libdir}/mysql/libmysqlclient.so
+%{_libdir}/mysql/libmysqlclient_r.so
+%endif
+%{_mandir}/man1/mysql_config*
+%{_mandir}/man1/mariadb_config*
+%endif
+
+%if %{with embedded}
+%files embedded
+%{_libdir}/mysql/libmysqld.so.*
+
+%files embedded-devel
+%{_libdir}/mysql/libmysqld.so
+%{_bindir}/mysql_client_test_embedded
+%{_bindir}/mysqltest_embedded
+%{_mandir}/man1/mysql_client_test_embedded.1*
+%{_mandir}/man1/mysqltest_embedded.1*
+%endif
+
+%if %{with bench}
+%files bench
+%{_datadir}/sql-bench
+%endif
+
+%if %{with test}
+%files test
+%{_bindir}/mysql_client_test
+%{_bindir}/my_safe_process
+%attr(-,mysql,mysql) %{_datadir}/mysql-test
+%{_mandir}/man1/mysql_client_test.1*
+%endif
+
+%if 0%{?scl:1}
+%scl_syspaths_files -n mariadb
+%scl_syspaths_files -n mariadb-config
+%scl_syspaths_files -n mariadb-backup
+%scl_syspaths_files -n mariadb-server
+%scl_syspaths_files -n mariadb-server-utils
+%scl_syspaths_files -n mariadb-server-galera
+%endif
+%changelog
+* Sun Sep 24 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.8-5
+- Support MYSQLD_OPTS and _WSREP_NEW_CLUSTER env vars in init script,
+  same as it is done in case of systemd unit file
+  Related: #1455850
+
+* Sat Sep 23 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.8-4
+- Fix issues found by rpmdiff, particularly:
+  unexpanded macro %{mysqld_pid_dir} -- left-over from switching pid file dir,
+  we can remove in new SCL
+  jar files included in connect engine
+  Related: #1455850
+
+* Wed Sep 20 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.8-3
+- Handle left-over files that do not uninstall
+  Resolves: #1487292
+- Fix uninstalled directories
+  Resolves: #1487292
+- Files outside of /opt/rh should be in syspath package
+  Resolves: #1492645
+- Split mariadb package to more sub-packages to match upstream's RPM list
+  Resolves: #1490419
+
+* Mon Aug 28 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.8-2
+- Support --defaults-group-suffix properly in systemd unit file
+  Resolves: #1485777
+- Run mysql-prepare-db-dir as non-root
+
+* Sun Aug 20 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.8-1
+- Rebase to 10.2.8
+
+* Wed Aug 09 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.7-6
+- Re-enable tests
+
+* Wed Aug 09 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.7-5
+- Allow 4567 port for tcp as well
+
+* Wed Aug 09 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.7-4
+- Install mysql-wait-ready on RHEL-6 for the SysV init
+- Do not use mysql-wait-stop on RHEL-7 service files
+
+* Tue Aug 08 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.7-3
+- Enable tests
+
+* Tue Aug 08 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.7-2
+- Re-add README and LICENSE files, fix dangling symlinks
+
+* Tue Aug 01 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.7-1
+- Rebase to 10.2.7
+- Use "/run" location instead of "/var/run" symlink
+  Related: #1455811
+- Remove mysql-wait-* scripts. They aren't needed when using systemd "Type=notify"
+- Enable building of mysqlbackup and include small fixes from Fedora
+- Marge more mostly format related changes from Fedora to keep the spec better
+
+* Mon Jun 26 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-9
+- Fix the SELinux context of mysqld_safe_helper on rhel-6 as well
+  Related: #1464803
+
+* Mon Jun 26 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-7
+- Define SELinux context for mysqld_safe_helper
+  Use scl enable for running prepare script after changing the user
+
+* Mon Jun 26 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-6
+- Use configured paths in galera_recovery.sh
+  Resolves: #1403416
+
+* Mon Jun 26 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-5
+- Re-enable tests without --ssl and --big-test that fail
+
+* Sun Jun 25 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-4
+- Fix mysql-prepare-db-dir for CVE-2017-3265
+
+* Sat Jun 24 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-3
+- Disable RocksDB engine
+- Split -server and -server-utils to make SPEC more similar to Fedora
+- Ship only binary mariadb_config, which would avoid multilib issues
+
+* Thu Jun 22 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-2
+- Add initial *-syspaths implementation
+
+* Mon Jun 19 2017 Honza Horak <hhorak@redhat.com> - 1:10.2.6-1
+- Update to 10.2.6
+- Uses GCC from devtoolset-7 since it fails on aarch with other versions
+- Disables dtrace since it failed to build with enabled
+
+* Wed Nov 23 2016 Michal Schorm <mschorm@redhat.com> - 1:10.1.19-7
+- Rebase to version 10.1.19
+- JdbcMariaDB.jar test removed
+- PCRE version check added
+- All test removed from blacklist, 2 new added to blacklist
+  Related: #1393306, #1396934
+  Also fix: CVE-2016-3492 CVE-2016-5616 CVE-2016-5624 CVE-2016-5626
+            CVE-2016-5629 CVE-2016-6662 CVE-2016-6663 CVE-2016-8283
+
+* Tue Jul 26 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.16-1
+- Rebase to version 10.1.16
+  Resolves: #1359870
+
+* Thu May 12 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.14-2
+- Fixed selinux policy removal
+  Related: #1333007
+
+* Wed May 11 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.14-1
+- Fixed selinux policy
+- Update to 10.1.14 (includes various bug fixes)
+- Add -h and --help options to galera_new_cluster
+  Resolves: #1333007
+
+* Thu May  5 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.13-2
+- Fix CVE-2016-3191 and CVE-2016-1283
+  Resolves: #1330494
+
+* Fri Apr 15 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.13-1
+- Update to 10.1.13
+
+* Wed Apr 13 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.11-14
+- Add selinux policy
+
+* Wed Apr 13 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.11-13
+- Rebuild with new boost
+
+* Wed Apr  6 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.11-12
+- Fixed Requires (missing scl_prefix)
+
+* Mon Apr  4 2016 Jakub Dorňák <jdornak@redhat.com> - 1:10.1.11-11
+- Add galera subpackage, which provides galera related files
+
+* Thu Feb 25 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-10
+- Rebuild after buildroot change
+  Resolves: #1311579
+
+* Tue Feb 16 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-9
+- Remove dangling symlink to /etc/init.d/mysql
+
+* Sat Feb 13 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-8
+- Enable test-suite
+
+* Sat Feb 13 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-7
+- Re-enable using libedit, which should be now fixed
+  Related: #1201988
+- Add Provides: bundled(pcre) in case we build with bundled pcre
+  Related: #1302296
+- embedded-devel should require libaio-devel
+  Resolves: #1290517
+
+* Thu Feb 11 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-6
+- Rebuild with newer scl-utils
+
+* Thu Feb 11 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-5
+- Add missing requirements for proper wsrep functionality
+- Remove mariadb-wait-ready call from systemd unit, we have now systemd notify support
+- Make mariadb@.service similar to mariadb.service
+
+* Thu Feb 11 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-4
+- Use systemd unit file more compatible with upstream
+
+* Thu Feb 11 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-3
+- Fix service name in galera_new_cluster script
+
+* Wed Feb 10 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-2
+- Add set -xe for better build logs
+
+* Sun Feb 07 2016 Honza Horak <hhorak@redhat.com> - 1:10.1.11-1
+- Update to 10.1.11
+
+* Tue Jul 28 2015 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.20-1
+- Rebase to version 10.0.20
+  Resolves: #1247029
+
+* Thu Apr 23 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-9
+- Define context for pid file dir explicitely
+  Resolves: #1207113
+- Fix mysqladmin crash if run with -u root -p
+  Resolves: #1207170
+
+* Tue Mar 31 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-8
+- Do not replace AES cipher
+  Fail in case any command in check fails
+  Related: #1124791
+
+* Fri Mar 20 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-7
+- Add dependency for semanage
+- Define SELinux context for files under /etc/my.cnf.d
+  Related: #1203991
+- Add openssl as BuildRequires to run some openssl tests during build
+  Related: #1189180
+
+* Tue Mar 17 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-6
+- Use correct comment in the init script
+  Related: #1184604
+
+* Sun Mar 15 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-5
+- Make openssl_1 test more robust for various openssl versions
+
+* Fri Mar 13 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-4
+- Include client plugins into -common package since they are used by both -libs
+  and base packages.
+- Do not use libedit
+  Related: #1201988
+- Daemon wrapper to run process with proper SELinux context
+  Resolves: #1202011
+- Let plugin dir to be owned by -common
+
+* Mon Mar 09 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-3
+- Rebuild due to 'scls' removal
+  Resolves: #1200048
+
+* Mon Mar 09 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-2
+- Release bump
+
+* Wed Mar 04 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.17-1
+- Rebase to version 10.0.17
+- Added variable for turn off skipping some tests
+- Add SELinux rules for pid file
+- Add SELinux definition for /var/log/mariadb.*
+  Related: #1194206
+
+* Tue Mar 03 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.16-6
+- Do not use scl prefix more than once in paths
+  Based on https://www.redhat.com/archives/sclorg/2015-February/msg00038.html
+- Check permissions when starting service on RHEL-6
+  Resolves: #1194699
+- Do not create test database by default
+  Related: #1194611
+
+* Mon Feb 23 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.16-5
+- Use --no-defaults when checking server status before starting
+
+* Wed Feb 18 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.16-4
+- Wait for daemon ends
+  Resolves: #1072958
+
+* Wed Feb 18 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.16-3
+- Fix openssl_1 test
+
+* Wed Feb 18 2015 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.16-2
+- Include new certificate for tests
+- Update lists of failing tests
+  Related: #1186110
+
+* Wed Feb 18 2015 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.16-1
+- Rebase to version 10.0.16
+  Resolves: #1187895
+
+* Wed Feb 18 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-19
+- Remove NFS register feature for questionable usage for DBs
+
+* Wed Feb 18 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-18
+- Create directory for socket in build for SCL
+
+* Mon Feb 16 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-17
+- Require scl_source if building for scl
+
+* Tue Jan 27 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-16
+- Do not include symlink to libmysqlclient if not shipping the library
+
+* Tue Jan 27 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-15
+- Do not define selinux specifically for /var/run and config, it is done
+  generally for all /etc and /var
+
+* Tue Jan 27 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-14
+- Run tests in scl environment
+
+* Mon Jan 26 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-13
+- Do not use clibrary in -devel package and mysql_config if not built with
+
+* Mon Jan 26 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-12
+- Enable oqgraph also for scl
+
+* Mon Jan 26 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-11
+- Restorecon on sclroot in post script and move selinux actions before working
+  with the service
+
+* Sun Jan 25 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-10
+- Use scl call in the logrotate script
+
+* Sun Jan 25 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-9
+- Do not create log file in post script
+
+* Sun Jan 25 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-8
+- Use pkg_name for files in share
+
+* Sat Jan 24 2015 Honza Horak <hhorak@redhat.com>
+- Fix path for sysconfig file
+  Filter provides in el6 properly
+  Fix initscript file location
+
+* Sat Jan 17 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-6
+- Do not package connect plugin for scl
+
+* Sat Jan 17 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-5
+- Rework register implementation
+
+* Fri Jan 16 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-6
+- Move service-environment into mariadb package
+
+* Fri Jan 16 2015 Honza Horak <hhorak@redhat.com> - 1:10.0.15-5
+- Implement scl register functionality
+
+* Fri Dec 05 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.15-3
+- Rework usage of macros and use macros defined in the meta package
+  Remove some compatibility artefacts
+- Fix macros paths in my.cnf
+- Create old location for pid file if it remained in my.cnf
+- Disable failing tests connect.mrr, connect.updelx2 on ppc and s390
+
+* Fri Dec 05 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.15-2
+- Merging changes from Fedora and upgrading to 10.0.15
+
+* Thu Nov 27 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.15-1
+- Update to 10.0.15
+
+* Thu Nov 20 2014 Jan Stanek <jstanek@redhat.com> - 1:10.0.14-8
+- Applied upstream fix for mysql_config --cflags output.
+  Resolves: #1160845
+
+* Fri Oct 24 2014 Jan Stanek <jstanek@redhat.com> - 1:10.0.14-7
+- Fixed compat service file.
+  Resolves: #1155700
+
+* Mon Oct 13 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-6
+- Remove bundled cmd-line-utils
+  Related: #1079637
+- Move mysqlimport man page to proper package
+- Disable main.key_cache test on s390
+  Releated: #1149647
+
+* Wed Oct 08 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-5
+- Disable tests connect.part_file, connect.part_table
+  and connect.updelx
+  Related: #1149647
+
+* Wed Oct 01 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-4
+- Add bcond_without mysql_names
+  Use more correct path when deleting mysql logrotate script
+
+* Wed Oct 01 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-3
+- Build with system libedit
+  Resolves: #1079637
+
+* Mon Sep 29 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-2
+- Add with_debug option
+
+* Mon Sep 29 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.14-1
+- Update to 10.0.14
+
+* Wed Sep 24 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-8
+- Move connect engine to a separate package
+  Rename oqgraph engine to align with upstream packages
+- Move some files to correspond with MariaDB upstream packages
+  client.cnf into -libs, mysql_plugin and msql2mysql into base,
+  tokuftdump and aria_* into -server, errmsg-utf8.txt into -errmsg
+- Remove duplicate cnf files packaged using %%doc
+- Check upgrade script added to warn about need for mysql_upgrade
+
+* Wed Sep 24 2014 Matej Muzila <mmuzila@redhat.com> - 1:10.0.13-7
+- Client related libraries moved from mariadb-server to mariadb-libs
+  Related: #1138843
+
+* Mon Sep 08 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-6
+- Disable vcol_supported_sql_funcs_myisam test on all arches
+  Related: #1096787
+- Install systemd service file on RHEL-7+
+  Server requires any mysql package, so it should be fine with older client
+
+* Thu Sep 04 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-5
+- Fix paths in mysql_install_db script
+  Resolves: #1134328
+- Use %%cmake macro
+
+* Tue Aug 19 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-4
+- Build config subpackage everytime
+- Disable failing tests: innodb_simulate_comp_failures_small, key_cache
+  rhbz#1096787
+
+* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.0.13-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Thu Aug 14 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-2
+- Include mysqld_unit only if required; enable tokudb in f20-
+
+* Wed Aug 13 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.13-1
+- Rebase to version 10.0.13
+
+* Tue Aug 12 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-8
+- Introduce -config subpackage and ship base config files here
+
+* Tue Aug  5 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-7
+- Adopt changes from mysql, thanks Bjorn Munch <bjorn.munch@oracle.com>
+
+* Mon Jul 28 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-6
+- Use explicit sysconfdir
+- Absolut path for default value for pid file and error log
+
+* Tue Jul 22 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-5
+- Hardcoded paths removed to work fine in chroot
+- Spec rewrite to be more similar to oterh MySQL implementations
+- Use variable for daemon unit name
+- Include SysV init script if built on older system
+- Add possibility to not ship some sub-packages
+
+* Mon Jul 21 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-4
+- Reformating spec and removing unnecessary snippets
+
+* Tue Jul 15 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.12-3
+- Enable OQGRAPH engine and package it as a sub-package
+- Add support for TokuDB engine for x86_64 (currently still disabled)
+- Re-enable tokudb_innodb_xa_crash again, seems to be fixed now
+- Drop superfluous -libs and -embedded ldconfig deps (thanks Ville Skyttä)
+- Separate -lib and -common sub-packages
+- Require /etc/my.cnf instead of shipping it
+- Include README.mysql-cnf
+- Multilib support re-worked
+- Introduce new option with_mysqld_unit
+- Removed obsolete mysql-cluster, the package should already be removed
+- Improve error message when log file is not writable
+- Compile all binaries with full RELRO (RHBZ#1092548)
+- Use modern symbol filtering with compatible backup
+- Add more groupnames for server's my.cnf
+- Error messages now provided by a separate package (thanks Alexander Barkov)
+- Expand paths in helper scripts using cmake
+
+* Wed Jun 18 2014 Mikko Tiihonen <mikko.tiihonen@iki.fi> - 1:10.0.12-2
+- Use -fno-delete-null-pointer-checks to avoid segfaults with gcc 4.9
+
+* Tue Jun 17 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.12-1
+- Rebase to version 10.0.12
+
+* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.0.11-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Tue Jun  3 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.11-4
+- rebuild with tests failing on different arches disabled (#1096787)
+
+* Thu May 29 2014 Dan Horák <dan[at]danny.cz> - 1:10.0.11-2
+- rebuild with tests failing on big endian arches disabled (#1096787)
+
+* Wed May 14 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.11-1
+- Rebase to version 10.0.11
+
+* Mon May 05 2014 Honza Horak <hhorak@redhat.com> - 1:10.0.10-3
+- Script for socket check enhanced
+
+* Thu Apr 10 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.10-2
+- use system pcre library
+
+* Thu Apr 10 2014 Jakub Dorňák <jdornak@redhat.com> - 1:10.0.10-1
+- Rebase to version 10.0.10
+
+* Wed Mar 12 2014 Honza Horak <hhorak@redhat.com> - 1:5.5.36-2
+- Server crashes on SQL select containing more group by and left join statements using innodb tables
+  Resolves: #1065676
+- Fix paths in helper scripts
+- Move language files into mariadb directory
+
+* Thu Mar 06 2014 Honza Horak <hhorak@redhat.com> - 1:5.5.36-1
+- Rebase to 5.5.36
+  https://kb.askmonty.org/en/mariadb-5536-changelog/
+
+* Tue Feb 25 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-5
+- Daemon helper scripts sanity changes and spec files clean-up
+
+* Tue Feb 11 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-4
+- Fix typo in mysqld.service
+  Resolves: #1063981
+
+* Wed Feb  5 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-3
+- Do not touch the log file in post script, so it does not get wrong owner
+  Resolves: #1061045
+
+* Thu Jan 30 2014 Honza Horak <hhorak@redhat.com> 1:5.5.35-1
+- Rebase to 5.5.35
+  https://kb.askmonty.org/en/mariadb-5535-changelog/
+  Also fixes: CVE-2014-0001, CVE-2014-0412, CVE-2014-0437, CVE-2013-5908,
+  CVE-2014-0420, CVE-2014-0393, CVE-2013-5891, CVE-2014-0386, CVE-2014-0401,
+  CVE-2014-0402
+  Resolves: #1054043
+  Resolves: #1059546
+
+* Tue Jan 14 2014 Honza Horak <hhorak@redhat.com> - 1:5.5.34-9
+- Adopt compatible system versioning
+  Related: #1045013
+- Use compatibility mysqld.service instead of link
+  Related: #1014311
+
+* Mon Jan 13 2014 Rex Dieter <rdieter@fedoraproject.org> 1:5.5.34-8
+- move mysql_config alternatives scriptlets to -devel too
+
+* Fri Jan 10 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-7
+- Build with -O3 on ppc64
+  Related: #1051069
+- Move mysql_config to -devel sub-package and remove Require: mariadb
+  Related: #1050920
+
+* Fri Jan 10 2014 Marcin Juszkiewicz <mjuszkiewicz@redhat.com> 1:5.5.34-6
+- Disable main.gis-precise test also for AArch64
+- Disable perfschema.func_file_io and perfschema.func_mutex for AArch64
+  (like it is done for 32-bit ARM)
+
+* Fri Jan 10 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-5
+- Clean all non-needed doc files properly
+
+* Wed Jan  8 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-4
+- Read socketfile location in mariadb-prepare-db-dir script
+
+* Mon Jan  6 2014 Honza Horak <hhorak@redhat.com> 1:5.5.34-3
+- Don't test EDH-RSA-DES-CBC-SHA cipher, it seems to be removed from openssl
+  which now makes mariadb/mysql FTBFS because openssl_1 test fails
+  Related: #1044565
+- Use upstream's layout for symbols version in client library
+  Related: #1045013
+- Check if socket file is not being used by another process at a time
+  of starting the service
+  Related: #1045435
+- Use %%ghost directive for the log file
+  Related: 1043501
+
+* Wed Nov 27 2013 Honza Horak <hhorak@redhat.com> 1:5.5.34-2
+- Fix mariadb-wait-ready script
+
+* Fri Nov 22 2013 Honza Horak <hhorak@redhat.com> 1:5.5.34-1
+- Rebase to 5.5.34
+
+* Mon Nov  4 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-4
+- Fix spec file to be ready for backport by Oden Eriksson
+  Resolves: #1026404
+
+* Mon Nov  4 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-3
+- Add pam-devel to build-requires in order to build
+  Related: #1019945
+- Check if correct process is running in mysql-wait-ready script
+  Related: #1026313
+
+* Mon Oct 14 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-2
+- Turn on test suite
+
+* Thu Oct 10 2013 Honza Horak <hhorak@redhat.com> 1:5.5.33a-1
+- Rebase to 5.5.33a
+  https://kb.askmonty.org/en/mariadb-5533-changelog/
+  https://kb.askmonty.org/en/mariadb-5533a-changelog/
+- Enable outfile_loaddata test
+- Disable tokudb_innodb_xa_crash test
+
+* Mon Sep  2 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-12
+- Re-organize my.cnf to include only generic settings
+  Resolves: #1003115
+- Move pid file location to /var/run/mariadb
+- Make mysqld a symlink to mariadb unit file rather than the opposite way
+  Related: #999589
+
+* Thu Aug 29 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-11
+- Move log file into /var/log/mariadb/mariadb.log
+- Rename logrotate script to mariadb
+- Resolves: #999589
+
+* Wed Aug 14 2013 Rex Dieter <rdieter@fedoraproject.org> 1:5.5.32-10
+- fix alternatives usage
+
+* Tue Aug 13 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-9
+- Multilib issues solved by alternatives
+  Resolves: #986959
+
+* Sat Aug 03 2013 Petr Pisar <ppisar@redhat.com> - 1:5.5.32-8
+- Perl 5.18 rebuild
+
+* Wed Jul 31 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-7
+- Do not use login shell for mysql user
+
+* Tue Jul 30 2013 Honza Horak <hhorak@redhat.com> - 1:5.5.32-6
+- Remove unneeded systemd-sysv requires
+- Provide mysql-compat-server symbol
+- Create mariadb.service symlink
+- Fix multilib header location for arm
+- Enhance documentation in the unit file
+- Use scriptstub instead of links to avoid multilib conflicts
+- Add condition for doc placement in F20+
+
+* Sun Jul 28 2013 Dennis Gilmore <dennis@ausil.us> - 1:5.5.32-5
+- remove "Requires(pretrans): systemd" since its not possible
+- when installing mariadb and systemd at the same time. as in a new install
+
+* Sat Jul 27 2013 Kevin Fenzi <kevin@scrye.com> 1:5.5.32-4
+- Set rpm doc macro to install docs in unversioned dir
+
+* Fri Jul 26 2013 Dennis Gilmore <dennis@ausil.us> 1:5.5.32-3
+- add Requires(pre) on systemd for the server package
+
+* Tue Jul 23 2013 Dennis Gilmore <dennis@ausil.us> 1:5.5.32-2
+- replace systemd-units requires with systemd
+- remove solaris files
+
+* Fri Jul 19 2013 Honza Horak <hhorak@redhat.com> 1:5.5.32-1
+- Rebase to 5.5.32
+  https://kb.askmonty.org/en/mariadb-5532-changelog/
+- Clean-up un-necessary systemd snippets
+
+* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 1:5.5.31-7
+- Perl 5.18 rebuild
+
+* Mon Jul  1 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-6
+- Test suite params enhanced to decrease server condition influence
+- Fix misleading error message when uninstalling built-in plugins
+  Related: #966873
+
+* Thu Jun 27 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-5
+- Apply fixes found by Coverity static analysis tool
+
+* Wed Jun 19 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-4
+- Do not use pretrans scriptlet, which doesn't work in anaconda
+  Resolves: #975348
+
+* Fri Jun 14 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-3
+- Explicitly enable mysqld if it was enabled in the beginning
+  of the transaction.
+
+* Thu Jun 13 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-2
+- Apply man page fix from Jan Stanek
+
+* Fri May 24 2013 Honza Horak <hhorak@redhat.com> 1:5.5.31-1
+- Rebase to 5.5.31
+  https://kb.askmonty.org/en/mariadb-5531-changelog/
+- Preserve time-stamps in case of installed files
+- Use /var/tmp instead of /tmp, since the later is using tmpfs,
+  which can cause problems
+  Resolves: #962087
+- Fix test suite requirements
+
+* Sun May  5 2013 Honza Horak <hhorak@redhat.com> 1:5.5.30-2
+- Remove mytop utility, which is packaged separately
+- Resolve multilib conflicts in mysql/private/config.h
+
+* Fri Mar 22 2013 Honza Horak <hhorak@redhat.com> 1:5.5.30-1
+- Rebase to 5.5.30
+  https://kb.askmonty.org/en/mariadb-5530-changelog/
+
+* Fri Mar 22 2013 Honza Horak <hhorak@redhat.com> 1:5.5.29-11
+- Obsolete MySQL since it is now renamed to community-mysql
+- Remove real- virtual names
+
+* Thu Mar 21 2013 Honza Horak <hhorak@redhat.com> 1:5.5.29-10
+- Adding epoch to have higher priority than other mysql implementations
+  when comes to provider comparison
+
+* Wed Mar 13 2013 Honza Horak <hhorak@redhat.com> 5.5.29-9
+- Let mariadb-embedded-devel conflict with MySQL-embedded-devel
+- Adjust mariadb-sortbuffer.patch to correspond with upstream patch
+
+* Mon Mar  4 2013 Honza Horak <hhorak@redhat.com> 5.5.29-8
+- Mask expected warnings about setrlimit in test suite
+
+* Thu Feb 28 2013 Honza Horak <hhorak@redhat.com> 5.5.29-7
+- Use configured prefix value instead of guessing basedir
+  in mysql_config
+Resolves: #916189
+- Export dynamic columns and non-blocking API functions documented
+  by upstream
+
+* Wed Feb 27 2013 Honza Horak <hhorak@redhat.com> 5.5.29-6
+- Fix sort_buffer_length option type
+
+* Wed Feb 13 2013 Honza Horak <hhorak@redhat.com> 5.5.29-5
+- Suppress warnings in tests and skip tests also on ppc64p7
+
+* Tue Feb 12 2013 Honza Horak <hhorak@redhat.com> 5.5.29-4
+- Suppress warning in tests on ppc
+- Enable fixed index_merge_myisam test case
+
+* Thu Feb 07 2013 Honza Horak <hhorak@redhat.com> 5.5.29-3
+- Packages need to provide also %%_isa version of mysql package
+- Provide own symbols with real- prefix to distinguish from mysql
+  unambiguously
+- Fix format for buffer size in error messages (MDEV-4156)
+- Disable some tests that fail on ppc and s390
+- Conflict only with real-mysql, otherwise mariadb conflicts with ourself
+
+* Tue Feb 05 2013 Honza Horak <hhorak@redhat.com> 5.5.29-2
+- Let mariadb-libs to own /etc/my.cnf.d
+
+* Thu Jan 31 2013 Honza Horak <hhorak@redhat.com> 5.5.29-1
+- Rebase to 5.5.29
+  https://kb.askmonty.org/en/mariadb-5529-changelog/
+- Fix inaccurate default for socket location in mysqld-wait-ready
+  Resolves: #890535
+
+* Thu Jan 31 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-8
+- Enable obsoleting mysql
+
+* Wed Jan 30 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-7
+- Adding necessary hacks for perl dependency checking, rpm is still
+  not wise enough
+- Namespace sanity re-added for symbol default_charset_info
+
+* Mon Jan 28 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-6
+- Removed %%{_isa} from provides/obsoletes, which doesn't allow
+  proper obsoleting
+- Do not obsolete mysql at the time of testing
+
+* Thu Jan 10 2013 Honza Horak <hhorak@redhat.com> 5.5.28a-5
+- Added licenses LGPLv2 and BSD
+- Removed wrong usage of %%{epoch}
+- Test-suite is run in %%check
+- Removed perl dependency checking adjustment, rpm seems to be smart enough
+- Other minor spec file fixes
+
+* Tue Dec 18 2012 Honza Horak <hhorak@redhat.com> 5.5.28a-4
+- Packaging of MariaDB based on MySQL package
+