This document contains documentation of the individual compiler flags and how to use them.
For packages which use autoconf to set up the build environment, use
the %configure macro to obtain the full complement of flags, like
this:
%configure
This will invoke the ./configure with arguments (such as
--prefix=/usr) to adjust the paths to the packaging defaults.
As a side effect, this will set the environment variables CFLAGS,
CXXFLAGS, FFLAGS, FCFLAGS, LDFLAGS and LT_SYS_LIBRARY_PATH,
so they can be used by makefiles and other build tools. (However,
existing values for these variables are not overwritten.)
If your package does not use autoconf, you can still set the same environment variables using
%set_build_flags
early in the %build section. (Again, existing environment variables
are not overwritten.)
Individual build flags are also available through RPM macros:
%{build_cflags} for the C compiler flags (also known as the
CFLAGS variable). Also historically available as %{optflags}.
Furthermore, at the start of the %build section, the environment
variable RPM_OPT_FLAGS is set to this value.%{build_cxxflags} for the C++ compiler flags (usually assigned to
the CXXFLAGS shell variable).%{build_fflags} forFFLAGS(the Fortran compiler flags, also
known as theFCFLAGS` variable).%{build_ldflags} for the link editor (ld) flags, usually known as
LDFLAGS. Note that the contents quotes linker arguments using
-Wl, so this variable is intended for use with the gcc compiler
driver. At the start of the %build section, the environment
variable RPM_LD_FLAGS is set to this value.The variable LT_SYS_LIBRARY_PATH is defined here to prevent the libtool
script (v2.4.6+) from hardcoding %_libdir into the binaries' RPATH.
These RPM macros do not alter shell environment variables.
For some other build tools separate mechanisms exist:
%cmake macro from the cmake-rpm-macros
package.Care must be taking not to compile the current selection of compiler
flags into any RPM package besides redhat-rpm-config, so that flag
changes are picked up automatically once redhat-rpm-config is
updated.
The default flags are suitable for building applications.
For building shared objects, you must compile with -fPIC in
(CFLAGS or CXXFLAGS) and link with -shared (in LDFLAGS).
For other considerations involving shared objects, see:
It is possible to set RPM macros to change some aspects of the compiler flags. Changing these flags should be used as a last recourse if other workarounds are not available.
If your package depends on the semantics of lazy binding (e.g., it has
plugins which load additional plugins to complete their dependencies,
before which some referenced functions are undefined), you should put
-Wl,-z,lazy at the end of the LDFLAGS setting when linking objects
which have such requirements. Under these circumstances, it is
unnecessary to disable hardened builds (and thus lose full ASLR for
executables), or link everything without -Wl,z,now (non-lazy
binding).
By default, the build flags enable fully hardened builds. To change this, include this in the RPM spec file:
%undefine _hardened_build
This turns off certain hardening features, as described in detail below. The main difference is that executables will be position-dependent (no full ASLR) and use lazy binding.
By default, the build flags cause a special output section to be included in ELF files which describes certain aspects of the build. To change this for all compiler invocations, include this in the RPM spec file:
%undefine _annotated_build
Be warned that this turns off watermarking, making it impossible to do full hardening coverage analysis for any binaries produced.
It is possible to disable annotations for individual compiler
invocations, using the -fplugin-arg-annobin-disable flag. However,
the annobin plugin must still be loaded for this flag to be
recognized, so it has to come after the hardening flags on the command
line (it has to be added at the end of CFLAGS, or specified after
the CFLAGS variable contents).
Optionally, the link editor will refuse to link shared objects which contain undefined symbols. Such symbols lack symbol versioning information and can be bound to the wrong (compatibility) symbol version at run time, and not the actual (default) symbol version which would have been used if the symbol definition had been available at static link time. Furthermore, at run time, the dynamic linker will not have complete dependency information (in the form of DT_NEEDED entries), which can lead to errors (crashes) if IFUNC resolvers are executed before the shared object containing them is fully relocated.
To switch on these checks, define this macro in the RPM spec file:
%define _strict_symbol_defs_build 1
If this RPM spec option is active, link failures will occur if the
linker command line does not list all shared objects which are needed.
In this case, you need to add the missing DSOs (with linker arguments
such as -lm). As a result, the link editor will also generated the
necessary DT_NEEDED entries.
In some cases (such as when a DSO is loaded as a plugin and is expected to bind to symbols in the main executable), undefined symbols are expected. In this case, you can add
%undefine _strict_symbol_defs_build
to the RPM spec file to disable these strict checks. Alternatively,
you can pass -z undefs to ld (written as -Wl,-z,undefs on the gcc
command line). The latter needs binutils 2.29.1-12.fc28 or later.
Since version 10, gcc defaults to -fno-common.
Builds may fail with multiple definition of ... errors.
As a short term workaround for such failure,
it is possible to add -fcommon to the flags by defining %_legacy_common_support.
%define _legacy_common_support 1
Properly fixing the failure is always preferred!
Compiler flags end up in the environment variables CFLAGS,
CXXFLAGS, FFLAGS, and FCFLAGS.
The general (architecture-independent) build flags are:
-O2: Turn on various GCC optimizations. See the GCC manual.
Optimization improves performance, the accuracy of warnings, and the
reach of toolchain-based hardening, but it makes debugging harder.-g: Generate debugging information (DWARF). In Fedora, this data
is separated into -debuginfo RPM packages whose installation is
optional, so debuging information does not increase the size of
installed binaries by default.-pipe: Run compiler and assembler in parallel and do not use a
temporary file for the assembler input. This can improve
compilation performance. (This does not affect code generation.)-Wall: Turn on various GCC warnings.
See the GCC manual.-Werror=format-security: Turn on format string warnings and treat
them as errors.
See the GCC manual.
This can occasionally result in compilation errors. In this case,
the best option is to rewrite the source code so that only constant
format strings (string literals) are used.-Wp,-D_FORTIFY_SOURCE=2: Source fortification activates various
hardening features in glibc:memcpy attempt to detect buffer lengths
and terminate the process if a buffer overflow is detected.printf format strings may only contain the %n format specifier
if the format string resides in read-only memory.open and openat flags are checked for consistency with the
presence of a mode argument.-fexceptions: Provide exception unwinding support for C programs.
See the -fexceptions option in the GCC
manual
and the cleanup variable
attribute.
This also hardens cancellation handling in C programs because
it is not required to use an on-stack jump buffer to install
a cancellation handler with pthread_cleanup_push. It also makes
it possible to unwind the stack (using C++ throw or Rust panics)
from C callback functions if a C library supports non-local exits
from them (e.g., via longjmp).-Wp,-D_GLIBCXX_ASSERTIONS: Enable lightweight assertions in the
C++ standard library, such as bounds checking for the subscription
operator on vectors. (This flag is added to both CFLAGS and
CXXFLAGS; C compilations will simply ignore it.)-fstack-protector-strong: Instrument functions to detect
stack-based buffer overflows before jumping to the return address on
the stack. The strong variant only performs the instrumentation
for functions whose stack frame contains addressable local
variables. (If the address of a variable is never taken, it is not
possible that a buffer overflow is caused by incorrect pointer
arithmetic involving a pointer to that variable.)-grecord-gcc-switches: Include select GCC command line switches in
the DWARF debugging information. This is useful for detecting the
presence of certain build flags and general hardening coverage.For hardened builds (which are enabled by default, see above for how
to disable them), the flag
-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 is added to the
command line. It adds the following flag to the command line:
-fPIE: Compile for a position-independent executable (PIE),
enabling full address space layout randomization (ASLR). This is
similar to -fPIC, but avoids run-time indirections on certain
architectures, resulting in improved performance and slightly
smaller executables. However, compared to position-dependent code
(the default generated by GCC), there is still a measurable
performance impact.
If the command line also contains -r (producing a relocatable
object file), -fpic or -fPIC, this flag is automatically
dropped. (-fPIE can only be used for code which is linked into
the main program.) Code which goes into static libraries should be
compiled with -fPIE, except when this code is expected to be
linked into DSOs, when -fPIC must be used.
To be effective, -fPIE must be used with the -pie linker flag
when producing an executable, see below.
To support binary watermarks for ELF
objects using
annobin, the -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 flag is
added by default. This can be switched off by undefining the
%_annotated_build RPM macro (see above).
These compiler flags are enabled for all builds (hardened/annotated or not), but their selection depends on the architecture:
-fstack-clash-protection: Turn on instrumentation to avoid
skipping the guard page in large stack frames. (Without this flag,
vulnerabilities can result where the stack overlaps with the heap,
or thread stacks spill into other regions of memory.) This flag is
fully ABI-compatible and has adds very little run-time overhead, but
is only available on certain architectures (currently aarch64, i386,
ppc64, ppc64le, s390x, x86_64).-fcf-protection: Instrument binaries to guard against
ROP/JOP attacks. Used on i686 and x86_64.-m64 and -m32: Some GCC builds support both 32-bit and 64-bit in
the same compilation. For such architectures, the RPM build process
explicitly selects the architecture variant by passing this compiler
flag.-fasynchronous-unwind-tables: Generate full unwind information
covering all program points. This is required for support of
asynchronous cancellation and proper unwinding from signal
handlers. It also makes performance and debugging tools more
useful because unwind information is available without having to
install (and load) debugging ienformation.
Asynchronous unwind tables are enabled for aarch64, i686, ppc64,
ppc64le, s390x, and x86_64. They are not needed on armhfp due to
architectural differences in stack management. On these
architectures, -fexceptions (see above) still enables regular
unwind tables (or they are enabled by default even without this
option).In addition, redhat-rpm-config re-selects the built-in default
tuning in the gcc package. These settings are:
-march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard
selects an Arm subarchitecture based on the ARMv7-A architecture
with 16 64-bit floating point registers. -mtune=cortex-8a selects
tuning for the Cortex-A8 implementation (while preserving compatibility
with other ARMv7-A implementations). -mabi=aapcs-linux switches to
the AAPCS ABI for GNU/Linux.-march=i686 is used to select a minmum support CPU level
of i686 (corresponding to the Pentium Pro). SSE2 support is
enabled with -msse2 (so only CPUs with SSE2 support can run the
compiled code; SSE2 was introduced first with the Pentium 4).
-mtune=generic activates tuning for a current blend of CPUs
(under the assumption that most users of i686 packages obtain them
through an x86_64 installation on current hardware).
-mfpmath=sse instructs GCC to use the SSE2 unit for floating
point math to avoid excess precision issues. -mstackrealign
avoids relying on the stack alignment guaranteed by the current
version of the i386 ABI.-mcpu=power8 -mtune=power8 selects a minimum supported
CPU level of POWER8 (the first CPU with ppc64le support) and tunes
for POWER8.-march=zEC12 -mtune=z13 specifies a minimum supported CPU
level of zEC12, while optimizing for a subsequent CPU generation
(z13).-mtune=generic selects tuning which is expected to
beneficial for a broad range of current CPUs.Linker flags end up in the environment variable LDFLAGS.
The linker flags listed below are injected. Note that they are
prefixed with -Wl because it is expected that these flags are passed
to the compiler driver gcc, and not directly to the link editor
ld.
-z relro: Activate the read-only after relocation feature.
Constant data and relocations are placed on separate pages, and the
dynamic linker is instructed to revoke write permissions after
dynamic linking. Full protection of relocation data requires the
-z now flag (see below).-z defs: Refuse to link shared objects (DSOs) with undefined symbols
(optional, see above).For hardened builds, the
-specs=/usr/lib/rpm/redhat/redhat-hardened-ld flag is added to the
compiler driver command line. (This can be disabled by undefining the
%_hardened_build macro; see above) This activates the following
linker flags:
-pie: Produce a PIE binary. This is only activated for the main
executable, and only if it is dynamically linked. This requires
that all objects which are linked in the main executable have been
compiled with -fPIE or -fPIC (or -fpie or -fpic; see above).
By itself, -pie has only a slight performance impact because it
disables some link editor optimization, however the -fPIE compiler
flag has some overhead.-z now: Disable lazy binding and turn on the BIND_NOW dynamic
linker feature. Lazy binding involves an array of function pointers
which is writable at run time (which could be overwritten as part of
security exploits, redirecting execution). Therefore, it is
preferable to turn of lazy binding, although it increases startup
time.Some packages include extension builders that allow users to build extension modules (which are usually written in C and C++) under the control of a special-purpose build system. This is a common functionality provided by scripting languages such as Python and Perl. Traditionally, such extension builders captured the Fedora build flags when these extension were built. However, these compiler flags are adjusted for a specific Fedora release and toolchain version and therefore do not work with a custom toolchain (e.g., different C/C++ compilers), and users might want to build their own extension modules with such toolchains.
The macros %{extension_cflags}, %{extension_cxxflags},
%{extension_fflags}, %{extension_ldflags} contain a subset of
flags that have been adjusted for compatibility with alternative
toolchains, while still preserving some of the compile-time security
hardening that the standard Fedora build flags provide.
The current set of differences are:
-specs= arguments) are used.Additional flags may be removed in the future if they prove to be incompatible with alternative toolchains.
Extension builders should detect whether they are performing a regular
RPM build (e.g., by looking for an RPM_OPT_FLAGS variable). In this
case, they should use the current set of Fedora build flags (that
is, the output from rpm --eval '%{build_cflags}' and related
commands). Otherwise, when not performing an RPM build, they can
either use hard-coded extension builder flags (thus avoiding a
run-time dependency on redhat-rpm-config), or use the current
extension builder flags (with a run-time dependency on
redhat-rpm-config).
As a result, extension modules built for Fedora will use the official Fedora build flags, while users will still be able to build their own extension modules with custom toolchains.