This document contains documentation of the individual compiler flags

and how to use them.

[TOC]

# Using RPM build flags

For packages which use autoconf to set up the build environment, use

the `%configure` macro to obtain the full complement of flags, like

this:

    %configure

This will invoke the `./configure` with arguments (such as

`--prefix=/usr`) to adjust the paths to the packaging defaults.

As a side effect, this will set the environment variables `CFLAGS`,

`CXXFLAGS`, `FFLAGS`, `FCFLAGS`, and `LDFLAGS`, so they can be used by

makefiles and other build tools.  (However, existing values for this

variables are not overwritten.)

If your package does not use autoconf, you can still set the same

environment variables using

    %set_build_flags

early in the `%build` section.  (Again, existing environment variables

are not overwritten.)

Individual build flags are also available through RPM macros:

* `%{build_cflags}` for the C compiler flags (also known as the

  `CFLAGS` variable).  Also historically available as `%{optflags}`.

  Furthermore, at the start of the `%build` section, the environment

  variable `RPM_OPT_FLAGS` is set to this value.

* `%{build_cxxflags}` for the C++ compiler flags (usually assigned to

  the `CXXFLAGS` shell variable).

* `%{build_fflags} for `FFLAGS` (the Fortran compiler flags, also

  known as the `FCFLAGS` variable).

* `%{build_ldflags}` for the link editor (ld) flags, usually known as

  `LDFLAGS`.  Note that the contents quotes linker arguments using

  `-Wl`, so this variable is intended for use with the `gcc` compiler

  driver.  At the start of the `%build` section, the environment

  variable `RPM_LD_FLAGS` is set to this value.

These RPM macros do not alter shell environment variables.

For some other build tools separate mechanisms exist:

* CMake builds use the the `%cmake` macro from the `cmake-rpm-macros`

  package.

Care must be taking not to compile the current selection of compiler

flags into any RPM package besides `redhat-rpm-config`, so that flag

changes are picked up automatically once `redhat-rpm-config` is

updated.

# Flag selection for the build type

The default flags are suitable for building applications.

For building shared objects, you must compile with `-fPIC` in

(`CFLAGS` or `CXXFLAGS`) and link with `-shared` (in `LDFLAGS`).

For other considerations involving shared objects, see:

* [Fedora Packaging Guidelines: Shared Libraries](https://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries)

# Customizing compiler flags

It is possible to set RPM macros to change some aspects of the

compiler flags.  Changing these flags should be used as a last

recourse if other workarunds are not available.

### Lazy binding

If your package depends on the semantics of lazy binding (e.g., it has

plugins which load additional plugins to complete their dependencies,

before which some referenced functions are undefined), you should put

`-Wl,-z,lazy` at the end of the `LDFLAGS` setting when linking objects

which have such requirements.  Under these circumstances, it is

unnecessary to disable hardened builds (and thus lose full ASLR for

executables), or link everything without `-Wl,z,now` (non-lazy

binding).

### Hardened builds

By default, the build flags enable fully hardened builds.  To change

this, include this in the RPM spec file:

    %undefine _hardened_build

This turns off certain hardening features, as described in detail

below.  The main difference is that executables will be

position-dependent (no full ASLR) and use lazy binding.

### Annotated builds/watermarking

By default, the build flags cause a special output section to be

included in ELF files which describes certain aspects of the build.

To change this for all compiler invocations, include this in the RPM

spec file:

    %undefine _annotated_build

Be warned that this turns off watermarking, making it impossible to do

full hardening coverage analysis for any binaries produced.

It is possible to disable annotations for individual compiler

invocations, using the `-fplugin-arg-annobin-disable` flag.  However,

the annobin plugin must still be loaded for this flag to be

recognized, so it has to come after the hardening flags on the command

line (it has to be added at the end of `CFLAGS`, or specified after

the `CFLAGS` variable contents).

### Strict symbol checks in the link editor (ld)

Optionally, the link editor will refuse to link shared objects which

contain undefined symbols.  Such symbols lack symbol versioning

information and can be bound to the wrong (compatibility) symbol

version at run time, and not the actual (default) symbol version which

would have been used if the symbol definition had been available at

static link time.  Furthermore, at run time, the dynamic linker will

not have complete dependency information (in the form of DT_NEEDED

entries), which can lead to errors (crashes) if IFUNC resolvers are

executed before the shared object containing them is fully relocated.

To switch on these checks, define this macro in the RPM spec file:

    %define _strict_symbol_defs_build 1

If this RPM spec option is active, link failures will occur if the

linker command line does not list all shared objects which are needed.

In this case, you need to add the missing DSOs (with linker arguments

such as `-lm`).  As a result, the link editor will also generated the

necessary DT_NEEDED entries.

In some cases (such as when a DSO is loaded as a plugin and is

expected to bind to symbols in the main executable), undefined symbols

are expected.  In this case, you can add

    %undefine _strict_symbol_defs_build

to the RPM spec file to disable these strict checks.  Alternatively,

you can pass `-z undefs` to ld (written as `-Wl,-z,undefs` on the gcc

command line).  The latter needs binutils 2.29.1-12.fc28 or later.

# Individual compiler flags

Compiler flags end up in the environment variables `CFLAGS`,

`CXXFLAGS`, `FFLAGS`, and `FCFLAGS`.

The general (architecture-independent) build flags are:

* `-O2`: Turn on various GCC optimizations.  See the [GCC manual](https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-O2).

  Optimization improves performance, the accuracy of warnings, and the

  reach of toolchain-based hardening, but it makes debugging harder.

* `-g`: Generate debugging information (DWARF).  In Fedora, this data

  is separated into `-debuginfo` RPM packages whose installation is

  optional, so debuging information does not increase the size of

  installed binaries by default.

* `-pipe`: Run compiler and assembler in parallel and do not use a

  temporary file for the assembler input.  This can improve

  compilation performance.  (This does not affect code generation.)

* `-Wall`: Turn on various GCC warnings.

  See the [GCC manual](https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wall).

* `-Werror=format-security`: Turn on format string warnings and treat

  them as errors.

  See the [GCC manual](https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wformat-security).

  This can occasionally result in compilation errors.  In this case,

  the best option is to rewrite the source code so that only constant

  format strings (string literals) are used.

* `-Wp,-D_FORTIFY_SOURCE=2`: Source fortification activates various

  hardening features in glibc:

    * String functions such as `memcpy` attempt to detect buffer lengths

      and terminate the process if a buffer overflow is detected.

    * `printf` format strings may only contain the `%n` format specifier

      if the format string resides in read-only memory.

    * `open` and `openat` flags are checked for consistency with the

      presence of a *mode* argument.

    * Plus other minor hardening changes.

  (These changes can occasionally break valid programs.)

* `-fexceptions`: Provide exception unwinding support for C programs.

  See the [`-fexceptions` option in the GCC

  manual](https://gcc.gnu.org/onlinedocs/gcc/Code-Gen-Options.html#index-fexceptions)

  and the [`cleanup` variable

  attribute](https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html#index-cleanup-variable-attribute).

  This also hardens cancellation handling in C programs because

  it is not required to use an on-stack jump buffer to install

  a cancellation handler with `pthread_cleanup_push`.  It also makes

  it possible to unwind the stack (using C++ `throw` or Rust panics)

  from C callback functions if a C library supports non-local exits

  from them (e.g., via `longjmp`).

* `-Wp,-D_GLIBCXX_ASSERTIONS`: Enable lightweight assertions in the

  C++ standard library, such as bounds checking for the subscription

  operator on vectors.  (This flag is added to both `CFLAGS` and

  `CXXFLAGS`; C compilations will simply ignore it.)

* `-fstack-protector-strong`: Instrument functions to detect

  stack-based buffer overflows before jumping to the return address on

  the stack.  The *strong* variant only performs the instrumentation

  for functions whose stack frame contains addressable local

  variables.  (If the address of a variable is never taken, it is not

  possible that a buffer overflow is caused by incorrect pointer

  arithmetic involving a pointer to that variable.)

* `-grecord-gcc-switches`: Include select GCC command line switches in

  the DWARF debugging information.  This is useful for detecting the

  presence of certain build flags and general hardening coverage.

For hardened builds (which are enabled by default, see above for how

to disable them), the flag

`-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1` is added to the

command line.  It adds the following flag to the command line:

*   `-fPIE`: Compile for a position-independent executable (PIE),

    enabling full address space layout randomization (ASLR).  This is

    similar to `-fPIC`, but avoids run-time indirections on certain

    architectures, resulting in improved performance and slightly

    smaller executables.  However, compared to position-dependent code

    (the default generated by GCC), there is still a measurable

    performance impact.

    If the command line also contains `-r` (producing a relocatable

    object file), `-fpic` or `-fPIC`, this flag is automatically

    dropped.  (`-fPIE` can only be used for code which is linked into

    the main program.) Code which goes into static libraries should be

    compiled with `-fPIE`, except when this code is expected to be

    linked into DSOs, when `-fPIC` must be used.

    To be effective, `-fPIE` must be used with the `-pie` linker flag

    when producing an executable, see below.

To support [binary watermarks for ELF

objects](https://fedoraproject.org/wiki/Toolchain/Watermark) using

annobin, the `-specs=/usr/lib/rpm/redhat/redhat-annobin-cc1` flag is

added by default.  This can be switched off by undefining the

`%_annotated_build` RPM macro (see above).

### Architecture-specific compiler flags

These compiler flags are enabled for all builds (hardened/annotated or

not), but their selection depends on the architecture:

*   `-fstack-clash-protection`: Turn on instrumentation to avoid

    skipping the guard page in large stack frames.  (Without this flag,

    vulnerabilities can result where the stack overlaps with the heap,

    or thread stacks spill into other regions of memory.)  This flag is

    fully ABI-compatible and has adds very little run-time overhead, but

    is only available on certain architectures (currently aarch64, i386,

    ppc64, ppc64le, s390x, x86_64).

*   `-fcf-protection`: Instrument binaries to guard against

    ROP/JOP attacks.  Used on i686 and x86_64.

*   `-m64` and `-m32`: Some GCC builds support both 32-bit and 64-bit in

    the same compilation.  For such architectures, the RPM build process

    explicitly selects the architecture variant by passing this compiler

    flag.

*   `-fasynchronous-unwind-tables`: Generate full unwind information

    covering all program points.  This is required for support of

    asynchronous cancellation and proper unwinding from signal

    handlers.  It also makes performance and debugging tools more

    useful because unwind information is available without having to

    install (and load) debugging ienformation.

    Asynchronous unwind tables are enabled for aarch64, i686, s390x,

    and x86_64.  They are not needed on armhfp, ppc64 and ppc64le due

    to architectural differences in stack management.  On these

    architectures, `-fexceptions` (see above) still enables regular

    unwind tables (or they are enabled by default even without this

    option).

*   `-funwind-tables`: A subset of the unwind information restricted

    to actual call sites.  Used on ppc64, ppc64le.  Also implied by

    `-fexceptions`.

In addition, `redhat-rpm-config` re-selects the built-in default

tuning in the `gcc` package.  These settings are:

*   **armhfp**: `-march=armv7-a -mfpu=vfpv3-d16  -mfloat-abi=hard`

    selects an Arm subarchitecture based on the ARMv7-A architecture

    with 16 64-bit floating point registers.  `-mtune=cortex-8a` selects

    tuning for the Cortex-A8 implementation (while preserving compatibility

    with other ARMv7-A implementations).  `-mabi=aapcs-linux` switches to

    the AAPCS ABI for GNU/Linux.

*   **i686**: `-march=x86-64` is used to select a minimum supported

    CPU level matching the baseline for the x86_64 architecture.

    `-mtune=generic` activates tuning for a current blend of CPUs.

    `-mfpmath=sse` uses the SSE2 unit for floating point math,

    instead of the legacy i387 FPU, avoiding issues related to excess

    precision.  `-mstackrealign` ensures that the generated code

    does not assume 16-byte stack alignment (as required by the current

    i386 ABI), but stays compatible with application code compiled

    before the introduction of 16-byte stack alignment along with SSE2

    support.

*   **ppc64le**: `-mcpu=power8 -mtune=power8` selects a minimum supported

    CPU level of POWER8 (the first CPU with ppc64le support) and tunes

    for POWER8.

*   **s390x**: `-march=z13 -mtune=z14` specifies a minimum supported CPU

    level of z13, while optimizing for a subsequent CPU generation

    (z14).

*   **x86_64**: `-mtune=generic` selects tuning which is expected to

     beneficial for a broad range of current CPUs.

*   **ppc64** and **aarch64** do not have any architecture-specific tuning.

# Individual linker flags

Linker flags end up in the environment variable `LDFLAGS`.

The linker flags listed below are injected.  Note that they are

prefixed with `-Wl` because it is expected that these flags are passed

to the compiler driver `gcc`, and not directly to the link editor

`ld`.

* `-z relro`: Activate the *read-only after relocation* feature.

  Constant data and relocations are placed on separate pages, and the

  dynamic linker is instructed to revoke write permissions after

  dynamic linking.  Full protection of relocation data requires the

  `-z now` flag (see below).

* `-z defs`: Refuse to link shared objects (DSOs) with undefined symbols

  (optional, see above).

For hardened builds, the

`-specs=/usr/lib/rpm/redhat/redhat-hardened-ld` flag is added to the

compiler driver command line.  (This can be disabled by undefining the

`%_hardened_build` macro; see above) This activates the following

linker flags:

* `-pie`: Produce a PIE binary.  This is only activated for the main

  executable, and only if it is dynamically linked.  This requires

  that all objects which are linked in the main executable have been

  compiled with `-fPIE` or `-fPIC` (or `-fpie` or `-fpic`; see above).

  By itself, `-pie` has only a slight performance impact because it

  disables some link editor optimization, however the `-fPIE` compiler

  flag has some overhead.

* `-z now`: Disable lazy binding and turn on the `BIND_NOW` dynamic

  linker feature.  Lazy binding involves an array of function pointers

  which is writable at run time (which could be overwritten as part of

  security exploits, redirecting execution).  Therefore, it is

  preferable to turn of lazy binding, although it increases startup

  time.

# Support for extension builders

Some packages include extension builders that allow users to build

extension modules (which are usually written in C and C++) under the

control of a special-purpose build system.  This is a common

functionality provided by scripting languages such as Python and Perl.

Traditionally, such extension builders captured the Fedora build flags

when these extension were built.  However, these compiler flags are

adjusted for a specific Fedora release and toolchain version and

therefore do not work with a custom toolchain (e.g., different C/C++

compilers), and users might want to build their own extension modules

with such toolchains.

The macros `%{extension_cflags}`, `%{extension_cxxflags}`,

`%{extension_fflags}`, `%{extension_ldflags}` contain a subset of

flags that have been adjusted for compatibility with alternative

toolchains, while still preserving some of the compile-time security

hardening that the standard Fedora build flags provide.

The current set of differences are:

* No GCC plugins (such as annobin) are activated.

* No GCC spec files (`-specs=` arguments) are used.

Additional flags may be removed in the future if they prove to be

incompatible with alternative toolchains.

Extension builders should detect whether they are performing a regular

RPM build (e.g., by looking for an `RPM_OPT_FLAGS` variable).  In this

case, they should use the *current* set of Fedora build flags (that

is, the output from `rpm --eval '%{build_cflags}'` and related

commands).  Otherwise, when not performing an RPM build, they can

either use hard-coded extension builder flags (thus avoiding a

run-time dependency on `redhat-rpm-config`), or use the current

extension builder flags (with a run-time dependency on

`redhat-rpm-config`).

As a result, extension modules built for Fedora will use the official

Fedora build flags, while users will still be able to build their own

extension modules with custom toolchains.