diff --git a/usr/share/rear/conf/default.conf b/usr/share/rear/conf/default.conf index 23a83b71..0d13b487 100644 --- a/usr/share/rear/conf/default.conf +++ b/usr/share/rear/conf/default.conf @@ -416,6 +416,18 @@ test "$RECOVERY_UPDATE_URL" || RECOVERY_UPDATE_URL="" # export MIGRATION_MODE='true' # directly before he calls "rear recover": test "$MIGRATION_MODE" || MIGRATION_MODE='' +#### + +#### +# Formatting DASDs (S/390 specific) +# DASD (Direct Access Storage Device) denotes a disk drive on the S/390 architecture. +# DASDs need to be formatted before use (even before creating a partition table on them). +# By default ReaR will format the DASDs that are going to be used to recreate the system +# (are referenced in disklayout.conf) before recreating the disk layout. +# This can be suppressed by setting FORMAT_DASDS="false". It can be useful when one intends +# to use already formatted DASDs as recovery target. +FORMAT_DASDS="" +#### ## # Resizing partitions in MIGRATION_MODE during "rear recover" diff --git a/usr/share/rear/layout/prep-for-mount/Linux-s390/205_s390_enable_disk.sh b/usr/share/rear/layout/prep-for-mount/Linux-s390/205_s390_enable_disk.sh new file mode 120000 index 00000000..5f7a2ac0 --- /dev/null +++ b/usr/share/rear/layout/prep-for-mount/Linux-s390/205_s390_enable_disk.sh @@ -0,0 +1 @@ +../../prepare/Linux-s390/205_s390_enable_disk.sh \ No newline at end of file diff --git a/usr/share/rear/layout/prepare/GNU/Linux/100_include_partition_code.sh b/usr/share/rear/layout/prepare/GNU/Linux/100_include_partition_code.sh index 13c69ce8..2a2bc33f 100644 --- a/usr/share/rear/layout/prepare/GNU/Linux/100_include_partition_code.sh +++ b/usr/share/rear/layout/prepare/GNU/Linux/100_include_partition_code.sh @@ -24,6 +24,7 @@ fi ### Prepare a disk for partitioning/general usage. create_disk() { local component disk size label junk + local blocksize layout dasdtype dasdcyls junk2 read component disk size label junk < <(grep "^disk $1 " "$LAYOUT_FILE") ### Disks should be block devices. @@ -67,7 +68,8 @@ sync EOF - create_partitions "$disk" "$label" + # $junk can contain useful DASD-specific fields + create_partitions "$disk" "$label" "$junk" cat >> "$LAYOUT_CODE" <> "$LAYOUT_CODE" <"$DASD_FORMAT_CODE" + +# Show the current output of lsdasd, it can be useful for identifying disks +# (in particular it shows the Linux device name <-> virtual device number mapping, +# formatted / unformatted status and the number/size of blocks when formatted ) +echo "# Current output of 'lsdasd':" >>"$DASD_FORMAT_CODE" +lsdasd | sed -e 's/^/# /' >>"$DASD_FORMAT_CODE" + +cat <>"$DASD_FORMAT_CODE" + +LogPrint "Start DASD format restoration." + +set -e +set -x + +EOF + +while read component disk size label junk; do + if [ "$label" == dasd ]; then + # Ignore excluded components. + # Normally they are removed in 520_exclude_components.sh, + # but we run before it, so we must skip them here as well. + if IsInArray "$disk" "${EXCLUDE_RECREATE[@]}" ; then + Log "Excluding $disk from DASD reformatting." + continue + fi + # dasd has more fields - junk is not junk anymore + read blocksize layout dasdtype dasdcyls junk2 <<<$junk + dasd_format_code "$disk" "$size" "$blocksize" "$layout" "$dasdtype" "$dasdcyls" >> "$DASD_FORMAT_CODE" || \ + LogPrintError "Error producing DASD format code for $disk" + fi +done < <(grep "^disk " "$LAYOUT_FILE") + +cat <>"$DASD_FORMAT_CODE" + +set +x +set +e + +LogPrint "DASD(s) formatted." + +EOF diff --git a/usr/share/rear/layout/prepare/Linux-s390/370_confirm_dasd_format_code.sh b/usr/share/rear/layout/prepare/Linux-s390/370_confirm_dasd_format_code.sh new file mode 100644 index 00000000..5ba4edd5 --- /dev/null +++ b/usr/share/rear/layout/prepare/Linux-s390/370_confirm_dasd_format_code.sh @@ -0,0 +1,69 @@ +# adapted from 100_confirm_layout_code.sh +# +# Let the user confirm the +# DASD format code (dasdformat.sh) script. +# + +is_false "$FORMAT_DASDS" && return 0 + +# Show the user confirmation dialog in any case but when not in migration mode +# automatically proceed with less timeout USER_INPUT_INTERRUPT_TIMEOUT (by default 10 seconds) +# to avoid longer delays (USER_INPUT_TIMEOUT is by default 300 seconds) in case of unattended recovery: +# (taken from 120_confirm_wipedisk_disks.sh) +local timeout="$USER_INPUT_TIMEOUT" +is_true "$MIGRATION_MODE" || timeout="$USER_INPUT_INTERRUPT_TIMEOUT" + +rear_workflow="rear $WORKFLOW" +original_disk_space_usage_file="$VAR_DIR/layout/config/df.txt" +rear_shell_history="$( echo -e "cd $VAR_DIR/layout/\nvi $DASD_FORMAT_CODE\nless $DASD_FORMAT_CODE" )" +unset choices +choices[0]="Confirm DASD format script and continue '$rear_workflow'" +choices[1]="Edit DASD format script ($DASD_FORMAT_CODE)" +choices[2]="View DASD format script ($DASD_FORMAT_CODE)" +choices[3]="View original disk space usage ($original_disk_space_usage_file)" +choices[4]="Confirm what is currently on the DASDs, skip formatting them and continue '$rear_workflow'" +choices[5]="Use Relax-and-Recover shell and return back to here" +choices[6]="Abort '$rear_workflow'" +prompt="Confirm or edit the DASD format script" +choice="" +wilful_input="" +# When USER_INPUT_DASD_FORMAT_CODE_CONFIRMATION has any 'true' value be liberal in what you accept and +# assume choices[0] 'Confirm DASD format' was actually meant: +is_true "$USER_INPUT_DASD_FORMAT_CODE_CONFIRMATION" && USER_INPUT_DASD_FORMAT_CODE_CONFIRMATION="${choices[0]}" +while true ; do + choice="$( UserInput -I DASD_FORMAT_CODE_CONFIRMATION -t "$timeout" -p "$prompt" -D "${choices[0]}" "${choices[@]}" )" && wilful_input="yes" || wilful_input="no" + case "$choice" in + (${choices[0]}) + # Confirm DASD format file and continue: + is_true "$wilful_input" && LogPrint "User confirmed DASD format script" || LogPrint "Continuing '$rear_workflow' by default" + break + ;; + (${choices[1]}) + # Run 'vi' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + vi $DASD_FORMAT_CODE 0<&6 1>&7 2>&8 + ;; + (${choices[2]}) + # Run 'less' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + less $DASD_FORMAT_CODE 0<&6 1>&7 2>&8 + ;; + (${choices[3]}) + # Run 'less' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + less $original_disk_space_usage_file 0<&6 1>&7 2>&8 + ;; + (${choices[4]}) + # Confirm what is on the disks and continue without formatting + FORMAT_DASDS="false" + ;; + (${choices[5]}) + # rear_shell runs 'bash' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + rear_shell "" "$rear_shell_history" + ;; + (${choices[6]}) + abort_dasd_format + Error "User chose to abort '$rear_workflow' in ${BASH_SOURCE[0]}" + ;; + esac +done + +chmod +x $DASD_FORMAT_CODE + diff --git a/usr/share/rear/layout/prepare/Linux-s390/400_run_dasd_format_code.sh b/usr/share/rear/layout/prepare/Linux-s390/400_run_dasd_format_code.sh new file mode 100644 index 00000000..16451af6 --- /dev/null +++ b/usr/share/rear/layout/prepare/Linux-s390/400_run_dasd_format_code.sh @@ -0,0 +1,185 @@ +# adapted from 200_run_layout_code.sh +# +# Run the DASD format code (dasdformat.sh) +# again and again until it succeeds or the user aborts. +# + +# Skip DASD formatting when the user has explicitly specified to not format them +# or when the user selected "Confirm what is currently on the DASDs, skip formatting them" +# in 370_confirm_dasd_format_code.sh + +is_false "$FORMAT_DASDS" && return 0 + +function lsdasd_output () { + lsdasd 1>> >( tee -a "$RUNTIME_LOGFILE" 1>&7 ) +} + +rear_workflow="rear $WORKFLOW" +original_disk_space_usage_file="$VAR_DIR/layout/config/df.txt" +rear_shell_history="$( echo -e "cd $VAR_DIR/layout/\nvi $DASD_FORMAT_CODE\nless $RUNTIME_LOGFILE" )" +wilful_input="" + +unset choices +choices[0]="Rerun DASD format script ($DASD_FORMAT_CODE)" +choices[1]="View '$rear_workflow' log file ($RUNTIME_LOGFILE)" +choices[2]="Edit DASD format script ($DASD_FORMAT_CODE)" +choices[3]="Show what is currently on the disks ('lsdasd' device list)" +choices[4]="View original disk space usage ($original_disk_space_usage_file)" +choices[5]="Use Relax-and-Recover shell and return back to here" +choices[6]="Confirm what is currently on the disks and continue '$rear_workflow'" +choices[7]="Abort '$rear_workflow'" +prompt="DASD format choices" + +choice="" +# When USER_INPUT_DASD_FORMAT_CODE_RUN has any 'true' value be liberal in what you accept and +# assume choices[0] 'Rerun DASD format script' was actually meant +# regardless that this likely lets 'rear recover' run an endless loop +# of failed DASD format attempts but ReaR must obey what the user specified +# (perhaps it is intended to let 'rear recover' loop here until an admin intervenes): +is_true "$USER_INPUT_DASD_FORMAT_CODE_RUN" && USER_INPUT_DASD_FORMAT_CODE_RUN="${choices[0]}" + +unset confirm_choices +confirm_choices[0]="Confirm recreated DASD format and continue '$rear_workflow'" +confirm_choices[1]="Go back one step to redo DASD format" +confirm_choices[2]="Use Relax-and-Recover shell and return back to here" +confirm_choices[3]="Abort '$rear_workflow'" +confirm_prompt="Confirm the recreated DASD format or go back one step" +confirm_choice="" +# When USER_INPUT_DASD_FORMAT_MIGRATED_CONFIRMATION has any 'true' value be liberal in what you accept and +# assume confirm_choices[0] 'Confirm recreated DASD format and continue' was actually meant: +is_true "$USER_INPUT_DASD_FORMAT_MIGRATED_CONFIRMATION" && USER_INPUT_DASD_FORMAT_MIGRATED_CONFIRMATION="${confirm_choices[0]}" + +# Run the DASD format code (dasdformat.sh) +# again and again until it succeeds or the user aborts +# or the user confirms to continue with what is currently on the disks +# (the user may have setup manually what he needs via the Relax-and-Recover shell): +while true ; do + prompt="The DASD format had failed" + # After switching to recreating with DASD format script + # change choices[0] from "Run ..." to "Rerun ...": + choices[0]="Rerun DASD format script ($DASD_FORMAT_CODE)" + # Run DASD_FORMAT_CODE in a sub-shell because it sets 'set -e' + # so that it exits the running shell in case of an error + # but that exit must not exit this running bash here: + ( source $DASD_FORMAT_CODE ) + # One must explicitly test whether or not $? is zero in a separated bash command + # because with bash 3.x and bash 4.x code like + # # ( set -e ; cat qqq ; echo "hello" ) && echo ok || echo failed + # cat: qqq: No such file or directory + # hello + # ok + # does not work as one may expect (cf. what "man bash" describes for 'set -e'). + # There is a subtle behavioural difference between bash 3.x and bash 4.x + # when a script that has 'set -e' set gets sourced: + # With bash 3.x the 'set -e' inside the sourced script is effective: + # # echo 'set -e ; cat qqq ; echo hello' >script.sh + # # ( source script.sh ) && echo ok || echo failed + # cat: qqq: No such file or directory + # failed + # With bash 4.x the 'set -e' inside the sourced script gets noneffective: + # # echo 'set -e ; cat qqq ; echo hello' >script.sh + # # ( source script.sh ) && echo ok || echo failed + # cat: qqq: No such file or directory + # hello + # ok + # With bash 3.x and bash 4.x testing $? in a separated bash command + # keeps the 'set -e' inside the sourced script effective: + # # echo 'set -e ; cat qqq ; echo hello' >script.sh + # # ( source script.sh ) ; (( $? == 0 )) && echo ok || echo failed + # cat: qqq: No such file or directory + # failed + # See also https://github.com/rear/rear/pull/1573#issuecomment-344303590 + if (( $? == 0 )) ; then + prompt="DASD format had been successful" + # When DASD_FORMAT_CODE succeeded and when not in migration mode + # break the outer while loop and continue the "rear recover" workflow + # which means continue with restoring the backup: + is_true "$MIGRATION_MODE" || break + # When DASD_FORMAT_CODE succeeded in migration mode + # let the user explicitly confirm the recreated (and usually migrated) format + # before continuing the "rear recover" workflow with restoring the backup. + # Show the recreated DASD format to the user on his terminal (and also in the log file): + LogPrint "Recreated DASD format:" + lsdasd_output + # Run an inner while loop with a user dialog so that the user can inspect the recreated DASD format + # and perhaps even manually fix the recreated DASD format if it is not what the user wants + # (e.g. by using the Relax-and-Recover shell and returning back to this user dialog): + while true ; do + confirm_choice="$( UserInput -I DASD_FORMAT_MIGRATED_CONFIRMATION -p "$confirm_prompt" -D "${confirm_choices[0]}" "${confirm_choices[@]}" )" && wilful_input="yes" || wilful_input="no" + case "$confirm_choice" in + (${confirm_choices[0]}) + # Confirm recreated DASD format and continue: + is_true "$wilful_input" && LogPrint "User confirmed recreated DASD format" || LogPrint "Continuing with recreated DASD format by default" + # Break the outer while loop and continue with restoring the backup: + break 2 + ;; + (${confirm_choices[1]}) + # Go back one step to redo DASD format: + # Only break the inner while loop (i.e. this user dialog loop) + # and continue with the next user dialog below: + break + ;; + (${confirm_choices[2]}) + # rear_shell runs 'bash' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + rear_shell "" "$rear_shell_history" + ;; + (${confirm_choices[3]}) + abort_dasd_format + Error "User did not confirm the recreated DASD format but aborted '$rear_workflow' in ${BASH_SOURCE[0]}" + ;; + esac + done + fi + # Run an inner while loop with a user dialog so that the user can fix things + # when DASD_FORMAT_CODE failed. + # Such a fix does not necessarily mean the user must change + # the dasdformat.sh script when DASD_FORMAT_CODE failed. + # The user might also fix things by only using the Relax-and-Recover shell and + # then confirm what is on the disks and continue with restoring the backup + # or abort this "rear recover" run to re-try from scratch. + while true ; do + choice="$( UserInput -I DASD_FORMAT_CODE_RUN -p "$prompt" -D "${choices[0]}" "${choices[@]}" )" && wilful_input="yes" || wilful_input="no" + case "$choice" in + (${choices[0]}) + # Rerun or run (after switching to recreating with DASD format script) DASD format script: + is_true "$wilful_input" && LogPrint "User runs DASD format script" || LogPrint "Running DASD format script by default" + # Only break the inner while loop (i.e. the user dialog loop): + break + ;; + (${choices[1]}) + # Run 'less' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + less $RUNTIME_LOGFILE 0<&6 1>&7 2>&8 + ;; + (${choices[2]}) + # Run 'vi' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + vi $DASD_FORMAT_CODE 0<&6 1>&7 2>&8 + ;; + (${choices[3]}) + LogPrint "This is the current list of DASDs:" + lsdasd_output + ;; + (${choices[4]}) + # Run 'less' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + less $original_disk_space_usage_file 0<&6 1>&7 2>&8 + ;; + (${choices[5]}) + # rear_shell runs 'bash' with the original STDIN STDOUT and STDERR when 'rear' was launched by the user: + rear_shell "" "$rear_shell_history" + ;; + (${choices[6]}) + # Confirm what is on the disks and continue: + # Break the outer while loop and continue with restoring the backup: + break 2 + ;; + (${choices[7]}) + abort_dasd_format + Error "User chose to abort '$rear_workflow' in ${BASH_SOURCE[0]}" + ;; + esac + done +# End of the outer while loop: +done + +# Local functions must be 'unset' because bash does not support 'local function ...' +# cf. https://unix.stackexchange.com/questions/104755/how-can-i-create-a-local-function-in-my-bashrc +unset -f lsdasd_output diff --git a/usr/share/rear/layout/prepare/default/010_prepare_files.sh b/usr/share/rear/layout/prepare/default/010_prepare_files.sh index 7a980e63..4191be33 100644 --- a/usr/share/rear/layout/prepare/default/010_prepare_files.sh +++ b/usr/share/rear/layout/prepare/default/010_prepare_files.sh @@ -7,6 +7,8 @@ LAYOUT_CODE="$VAR_DIR/layout/diskrestore.sh" LAYOUT_XFS_OPT_DIR="$VAR_DIR/layout/xfs" LAYOUT_XFS_OPT_DIR_RESTORE="$LAYOUT_XFS_OPT_DIR/restore" +DASD_FORMAT_CODE="$VAR_DIR/layout/dasdformat.sh" + FS_UUID_MAP="$VAR_DIR/layout/fs_uuid_mapping" LUN_WWID_MAP="$VAR_DIR/layout/lun_wwid_mapping" diff --git a/usr/share/rear/layout/prepare/default/250_compare_disks.sh b/usr/share/rear/layout/prepare/default/250_compare_disks.sh index c459b928..751433ba 100644 --- a/usr/share/rear/layout/prepare/default/250_compare_disks.sh +++ b/usr/share/rear/layout/prepare/default/250_compare_disks.sh @@ -54,7 +54,9 @@ local more_than_one_same_orig_size='' # Cf. the "Compare disks one by one" code below: while read disk dev size junk ; do if IsInArray "$size" "${original_system_used_disk_sizes[@]}" ; then - more_than_one_same_orig_size='true' + if ! has_mapping_hint "$dev" ; then + more_than_one_same_orig_size='true' + fi else original_system_used_disk_sizes+=( "$size" ) fi @@ -109,14 +111,17 @@ fi # No further disk comparisons are needed when MIGRATION_MODE is already set true above: if ! is_true "$MIGRATION_MODE" ; then # Compare original disks and their possible target disk one by one: - while read disk dev size junk ; do - dev=$( get_sysfs_name $dev ) + while read disk devnode size junk ; do + dev=$( get_sysfs_name $devnode ) Log "Comparing $dev" if test -e "/sys/block/$dev" ; then Log "Device /sys/block/$dev exists" newsize=$( get_disk_size $dev ) if test "$newsize" -eq "$size" ; then LogPrint "Device $dev has expected (same) size $size bytes (will be used for '$WORKFLOW')" + elif test "$( get_mapping_hint $devnode )" == "$devnode" ; then + Debug "Found identical mapping hint ${devnode} -> ${devnode}" + LogPrint "Device $dev found according to mapping hints (will be used for '$WORKFLOW')" else LogPrint "Device $dev has size $newsize bytes but $size bytes is expected (needs manual configuration)" MIGRATION_MODE='true' diff --git a/usr/share/rear/layout/prepare/default/300_map_disks.sh b/usr/share/rear/layout/prepare/default/300_map_disks.sh index 2e90768c..468aa35c 100644 --- a/usr/share/rear/layout/prepare/default/300_map_disks.sh +++ b/usr/share/rear/layout/prepare/default/300_map_disks.sh @@ -112,7 +112,14 @@ while read keyword orig_device orig_size junk ; do # Continue with next original device when it is already used as source in the mapping file: is_mapping_source "$orig_device" && continue # First, try to find if there is a current disk with same name and same size as the original: - sysfs_device_name="$( get_sysfs_name "$orig_device" )" + # (possibly influenced by mapping hints if known) + if has_mapping_hint "$orig_device" ; then + candidate_target_device_name="$( get_mapping_hint "$orig_device" )" + Debug "Using mapping hint ${candidate_target_device_name} as candidate for $orig_device mapping" + else + candidate_target_device_name="$orig_device" + fi + sysfs_device_name="$( get_sysfs_name "$candidate_target_device_name" )" current_device="/sys/block/$sysfs_device_name" if test -e $current_device ; then current_size=$( get_disk_size $sysfs_device_name ) @@ -122,11 +129,16 @@ while read keyword orig_device orig_size junk ; do # Continue with next one if the current one is already used as target in the mapping file: is_mapping_target "$preferred_target_device_name" && continue # Use the current one if it is of same size as the old one: - if test "$orig_size" -eq "$current_size" ; then + if has_mapping_hint "$orig_device" || test "$orig_size" -eq "$current_size" ; then # Ensure the determined target device is really a block device: if test -b "$preferred_target_device_name" ; then + if has_mapping_hint "$orig_device" ; then + mapping_reason="determined by mapping hint" + else + mapping_reason="same name and same size $current_size" + fi add_mapping "$orig_device" "$preferred_target_device_name" - LogPrint "Using $preferred_target_device_name (same name and same size) for recreating $orig_device" + LogPrint "Using $preferred_target_device_name ($mapping_reason) for recreating $orig_device" # Continue with next original device in the LAYOUT_FILE: continue fi diff --git a/usr/share/rear/layout/save/GNU/Linux/200_partition_layout.sh b/usr/share/rear/layout/save/GNU/Linux/200_partition_layout.sh index 3ab7357d..da6ce64c 100644 --- a/usr/share/rear/layout/save/GNU/Linux/200_partition_layout.sh +++ b/usr/share/rear/layout/save/GNU/Linux/200_partition_layout.sh @@ -362,18 +362,27 @@ Log "Saving disk partitions." if [[ $blockd == dasd* && "$ARCH" == "Linux-s390" ]] ; then devname=$(get_device_name $disk) + dasdnum=$( lsdasd | awk "\$3 == \"$blockd\" { print \$1}" ) + dasdstatus=$( lsdasd | awk "\$3 == \"$blockd\" { print \$2}" ) + # ECKD or FBA + dasdtype=$( lsdasd | awk "\$3 == \"$blockd\" { print \$5}" ) + if [ "$dasdtype" != ECKD ] && [ "$dasdtype" != FBA ]; then + LogPrint "Type $dasdtype of DASD $blockd unexpected: neither ECKD nor FBA" + fi - echo "# active dasd bus and channel" - echo "# bus-id type" - echo "dasd_channel $( lsdasd|grep $blockd|awk '{ print $1 " " $2 " " $3 " " $4}' )" - - echo "# dasdfmt - disk layout is either cdl for the compatible disk layout (default) or ldl" - echo "# example usage: dasdfmt -b 4096 -d cdl -y /dev/dasda" - layout=$(dasdview -x /dev/$blockd|grep "^format"|awk '{print $7}') - blocksize=$( dasdview -i /dev/$blockd|grep blocksize|awk '{print $6}' ) - echo "# dasdfmt $devname" - echo "# dasdfmt -b -d -y " - echo "dasdfmt -b $blocksize -d $layout -y $devname" + echo "# every DASD bus and channel" + echo "# Format: dasd_channel " + echo "dasd_channel $dasdnum $blockd" + + # We need to print the dasd_channel line even for ignored devices, + # otherwise we could have naming gaps and naming would change when + # recreating layout. + # E.g. if dasda is ignored, and dasdb is not, we would create only dasdb + # during recreation, but it would be named dasda. + if [ "$dasdstatus" != active ]; then + Log "Ignoring $blockd: it is not active (Status is $dasdstatus)" + continue + fi fi #FIXME: exclude *rpmb (Replay Protected Memory Block) for nvme*, mmcblk* and uas @@ -387,11 +396,38 @@ Log "Saving disk partitions." devname=$(get_device_name $disk) devsize=$(get_disk_size ${disk#/sys/block/}) disktype=$(parted -s $devname print | grep -E "Partition Table|Disk label" | cut -d ":" -f "2" | tr -d " ") - - echo "# Disk $devname" - echo "# Format: disk " - echo "disk $devname $devsize $disktype" - + if [ "$disktype" != "dasd" ]; then + echo "# Disk $devname" + echo "# Format: disk " + echo "disk $devname $devsize $disktype" + elif [[ $blockd == dasd* && "$ARCH" == "Linux-s390" ]] ; then + layout=$(dasdview -x $devname |grep "^format"|awk '{print $7}') + case "$layout" in + (NOT) + # NOT -> dasdview has printed "NOT formatted" + LogPrintError "Ignoring $blockd: it is not formatted" + continue + ;; + (LDL|CDL) + ;; + (*) + BugError "Invalid 'disk $devname' entry (unknown DASD layout $layout)" + ;; + esac + test $disktype || Error "No partition label type for DASD entry 'disk $devname'" + blocksize=$( get_block_size "$blockd" ) + if ! test $blocksize ; then + # fallback - ugly method + blocksize=$( dasdview -i $devname |grep blocksize|awk '{print $6}' ) + test $blocksize || Error "Unknown block size of DASD $devname" + fi + dasdcyls=$( get_dasd_cylinders "$blockd" ) + echo "# Disk $devname" + echo "# Format: disk " + echo "disk $devname $devsize $disktype $blocksize $layout $dasdtype $dasdcyls" + else + Error "Invalid 'disk $devname' entry (DASD partition label on non-s390 arch $ARCH)" + fi echo "# Partitions on $devname" echo "# Format: part /dev/" extract_partitions "$devname" diff --git a/usr/share/rear/lib/layout-functions.sh b/usr/share/rear/lib/layout-functions.sh index 91c5ff73..4f5b8f6f 100644 --- a/usr/share/rear/lib/layout-functions.sh +++ b/usr/share/rear/lib/layout-functions.sh @@ -93,6 +93,12 @@ abort_recreate() { restore_original_file "$LAYOUT_FILE" } +abort_dasd_format() { + Log "Error detected during DASD formatting." + Log "Restoring saved original $DASD_FORMAT_FILE" + restore_original_file "$DASD_FORMAT_FILE" +} + # Test and log if a component $1 (type $2) needs to be recreated. create_component() { local device="$1" @@ -722,6 +728,46 @@ get_block_size() { fi } +# Get the number of cylinders of a DASD. +# The number of cylinders has the advantage of being fixed - size depends on formatting +# and number of cylinders is valid even for unformatted DASDs, size is not. +get_dasd_cylinders() { + local disk_name="${1##*/}" # /some/path/dasda -> dasda + local dasd_cyls + + dasd_cyls=$(dasdview -i /dev/$disk_name | grep cylinders | cut -d ':' -f2 | awk '{print $4}') + ### Make sure we always return a number + echo $(( dasd_cyls )) +} + +# Sometimes we know what the new device for the original device should be in a more reliable way +# than by looking at disk sizes. THis information is called "mapping hints". Let's pass them +# to the mapping code using the DISK_MAPPING_HINTS array. Each element of the array has the form +# "/dev/source /dev/target" (space-separated). + +# Output the mapping hint for the original device. +function get_mapping_hint () { + local device="$1" + local hint mapping_hint_source mapping_hint_target + + for hint in "${DISK_MAPPING_HINTS[@]}"; do + mapping_hint_source=${hint%% *} + mapping_hint_target=${hint##* } + if [ "${device}" == "${mapping_hint_source}" ] ; then + echo "$mapping_hint_target" + return 0 + fi + done + return 1 +} + +# Determine if there is a mapping hint for the original device. +function has_mapping_hint () { + local device="$1" + + get_mapping_hint "$device" > /dev/null +} + # Get the UUID of a device. # Device is something like /dev/sda1. blkid_uuid_of_device() {