%ifarch %{ix86} %global kvm_package system-x86 # need_qemu_kvm should only ever be used by x86 %global need_qemu_kvm 1 %endif %ifarch x86_64 %global kvm_package system-x86 # need_qemu_kvm should only ever be used by x86 %global need_qemu_kvm 1 %endif %ifarch %{power64} %global kvm_package system-ppc %endif %ifarch s390x %global kvm_package system-s390x %endif %ifarch armv7hl %global kvm_package system-arm %endif %ifarch aarch64 %global kvm_package system-aarch64 %endif %ifarch %{mips} %global kvm_package system-mips %endif %global user_static 1 %global have_kvm 0 %if 0%{?kvm_package:1} %global have_kvm 1 %endif # Matches numactl ExcludeArch %global have_numactl 1 %ifarch s390 %{arm} %global have_numactl 0 %endif # Upstream disables iasl for big endian and QEMU checks # for this. Fedora has re-enabled it on BE circumventing # the QEMU checks, but it fails none the less: # # https://bugzilla.redhat.com/show_bug.cgi?id=1332449 %global have_iasl 1 %ifnarch s390 s390x ppc ppc64 %global have_iasl 0 %endif # Matches spice ExclusiveArch %ifarch %{ix86} x86_64 %{arm} aarch64 %global have_spice 1 %endif # Matches xen ExclusiveArch %ifarch %{ix86} x86_64 armv7hl aarch64 %global have_xen 1 %endif # Matches edk2.spec ExclusiveArch %ifarch %{ix86} x86_64 %{arm} aarch64 %global have_edk2 1 %endif # If we can run qemu-sanity-check, hostqemu gets defined. %ifarch %{arm} %global hostqemu arm-softmmu/qemu-system-arm %endif %ifarch aarch64 %global hostqemu arm-softmmu/qemu-system-aarch64 %endif %ifarch %{ix86} %global hostqemu i386-softmmu/qemu-system-i386 %endif %ifarch x86_64 %global hostqemu x86_64-softmmu/qemu-system-x86_64 %endif # All modules should be listed here. %global requires_all_modules \ Requires: %{name}-block-curl = %{epoch}:%{version}-%{release} \ Requires: %{name}-block-dmg = %{epoch}:%{version}-%{release} \ Requires: %{name}-block-gluster = %{epoch}:%{version}-%{release} \ Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release} \ Requires: %{name}-block-nfs = %{epoch}:%{version}-%{release} \ Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release} \ Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release} \ Requires: %{name}-audio-alsa = %{epoch}:%{version}-%{release} \ Requires: %{name}-audio-oss = %{epoch}:%{version}-%{release} \ Requires: %{name}-audio-pa = %{epoch}:%{version}-%{release} \ Requires: %{name}-audio-sdl = %{epoch}:%{version}-%{release} \ Requires: %{name}-ui-curses = %{epoch}:%{version}-%{release} \ Requires: %{name}-ui-gtk = %{epoch}:%{version}-%{release} \ Requires: %{name}-ui-sdl = %{epoch}:%{version}-%{release} # Release candidate version tracking %global rcver rc3 %if 0%{?rcver:1} %global rcrel .%{rcver} %global rcstr -%{rcver} %endif Summary: QEMU is a FAST! processor emulator Name: qemu Version: 3.0.0 Release: 0.2%{?rcrel}%{?dist} Epoch: 2 License: GPLv2 and BSD and MIT and CC-BY URL: http://www.qemu.org/ Source0: http://wiki.qemu-project.org/download/%{name}-%{version}%{?rcstr}.tar.xz # guest agent service Source10: qemu-guest-agent.service Source17: qemu-ga.sysconfig # guest agent udev rules Source11: 99-qemu-guest-agent.rules # /etc/qemu/bridge.conf Source12: bridge.conf # qemu-kvm back compat wrapper installed as /usr/bin/qemu-kvm Source13: qemu-kvm.sh # PR manager service Source14: qemu-pr-helper.service Source15: qemu-pr-helper.socket # /etc/modprobe.d/kvm.conf, for x86 Source20: kvm-x86.modprobe.conf # /etc/security/limits.d/95-kvm-ppc64-memlock.conf Source21: 95-kvm-ppc64-memlock.conf # documentation deps BuildRequires: texinfo # For /usr/bin/pod2man BuildRequires: perl-podlators # For sanity test BuildRequires: qemu-sanity-check-nodeps BuildRequires: kernel %if %{have_iasl} # For acpi compilation BuildRequires: iasl %endif # For chrpath calls in specfile BuildRequires: chrpath # -display sdl support BuildRequires: SDL2-devel # used in various places for compression BuildRequires: zlib-devel # used in various places for crypto BuildRequires: gnutls-devel # VNC sasl auth support BuildRequires: cyrus-sasl-devel # aio implementation for block drivers BuildRequires: libaio-devel # pulseaudio audio output BuildRequires: pulseaudio-libs-devel # alsa audio output BuildRequires: alsa-lib-devel # qemu-pr-helper multipath support (requires libudev too) BuildRequires: device-mapper-multipath-devel BuildRequires: systemd-devel # iscsi drive support BuildRequires: libiscsi-devel # NFS drive support BuildRequires: libnfs-devel # snappy compression for memory dump BuildRequires: snappy-devel # lzo compression for memory dump BuildRequires: lzo-devel # needed for -display curses BuildRequires: ncurses-devel # used by 9pfs BuildRequires: libattr-devel BuildRequires: libcap-devel # used by qemu-bridge-helper and qemu-pr-helper BuildRequires: libcap-ng-devel # spice usb redirection support BuildRequires: usbredir-devel >= 0.5.2 %if 0%{?have_spice:1} # spice graphics support BuildRequires: spice-protocol >= 0.12.2 BuildRequires: spice-server-devel >= 0.12.0 %endif # seccomp containment support BuildRequires: libseccomp-devel >= 2.3.0 # For network block driver BuildRequires: libcurl-devel # For rbd block driver BuildRequires: librados2-devel BuildRequires: librbd1-devel # We need both because the 'stap' binary is probed for by configure BuildRequires: systemtap BuildRequires: systemtap-sdt-devel # For VNC JPEG support BuildRequires: libjpeg-devel # For VNC PNG support BuildRequires: libpng-devel # For BlueZ device support BuildRequires: bluez-libs-devel # For Braille device support BuildRequires: brlapi-devel # For FDT device tree support BuildRequires: libfdt-devel # Hard requirement for version >= 1.3 BuildRequires: pixman-devel # For gluster support BuildRequires: glusterfs-devel >= 3.4.0 BuildRequires: glusterfs-api-devel >= 3.4.0 # Needed for usb passthrough for qemu >= 1.5 BuildRequires: libusbx-devel # SSH block driver BuildRequires: libssh2-devel # GTK frontend BuildRequires: gtk3-devel BuildRequires: vte291-devel # GTK translations BuildRequires: gettext # RDMA migration BuildRequires: rdma-core-devel %if 0%{?have_xen:1} # Xen support BuildRequires: xen-devel %endif %if %{have_numactl} # qemu 2.1: needed for memdev hostmem backend BuildRequires: numactl-devel %endif # qemu 2.3: reading bzip2 compressed dmg images BuildRequires: bzip2-devel # qemu 2.4: needed for opengl bits BuildRequires: libepoxy-devel # qemu 2.5: needed for TLS test suite BuildRequires: libtasn1-devel # qemu 2.5: libcacard is it's own project now BuildRequires: libcacard-devel >= 2.5.0 # qemu 2.5: virgl 3d support BuildRequires: virglrenderer-devel # qemu 2.6: Needed for gtk GL support BuildRequires: mesa-libgbm-devel # qemu 2.11: preferred disassembler for TCG BuildRequires: capstone-devel # qemu 2.12: parallels disk images require libxml2 now BuildRequires: libxml2-devel # python scripts in the build process BuildRequires: python3 BuildRequires: glibc-static pcre-static glib2-static zlib-static %if 0%{?hostqemu:1} # For complicated reasons, this is required so that # /bin/kernel-install puts the kernel directly into /boot, instead of # into a /boot/ subdirectory (in Fedora >= 23). This is # so we can run qemu-sanity-check. Read the kernel-install script to # understand why. BuildRequires: grubby %endif Requires: %{name}-user = %{epoch}:%{version}-%{release} Requires: %{name}-system-aarch64 = %{epoch}:%{version}-%{release} Requires: %{name}-system-alpha = %{epoch}:%{version}-%{release} Requires: %{name}-system-arm = %{epoch}:%{version}-%{release} Requires: %{name}-system-cris = %{epoch}:%{version}-%{release} Requires: %{name}-system-lm32 = %{epoch}:%{version}-%{release} Requires: %{name}-system-m68k = %{epoch}:%{version}-%{release} Requires: %{name}-system-microblaze = %{epoch}:%{version}-%{release} Requires: %{name}-system-mips = %{epoch}:%{version}-%{release} Requires: %{name}-system-moxie = %{epoch}:%{version}-%{release} Requires: %{name}-system-nios2 = %{epoch}:%{version}-%{release} Requires: %{name}-system-or1k = %{epoch}:%{version}-%{release} Requires: %{name}-system-ppc = %{epoch}:%{version}-%{release} Requires: %{name}-system-riscv = %{epoch}:%{version}-%{release} Requires: %{name}-system-s390x = %{epoch}:%{version}-%{release} Requires: %{name}-system-sh4 = %{epoch}:%{version}-%{release} Requires: %{name}-system-sparc = %{epoch}:%{version}-%{release} Requires: %{name}-system-tricore = %{epoch}:%{version}-%{release} Requires: %{name}-system-unicore32 = %{epoch}:%{version}-%{release} Requires: %{name}-system-x86 = %{epoch}:%{version}-%{release} Requires: %{name}-system-xtensa = %{epoch}:%{version}-%{release} Requires: %{name}-img = %{epoch}:%{version}-%{release} %description QEMU is a generic and open source processor emulator which achieves a good emulation speed by using dynamic translation. QEMU has two operating modes: * Full system emulation. In this mode, QEMU emulates a full system (for example a PC), including a processor and various peripherials. It can be used to launch different Operating Systems without rebooting the PC or to debug system code. * User mode emulation. In this mode, QEMU can launch Linux processes compiled for one CPU on another CPU. As QEMU requires no host kernel patches to run, it is safe and easy to use. %package common Summary: QEMU common files needed by all QEMU targets Requires: ipxe-roms-qemu Requires(post): /usr/bin/getent Requires(post): /usr/sbin/groupadd Requires(post): /usr/sbin/useradd Requires(post): systemd-units Requires(preun): systemd-units Requires(postun): systemd-units %description common This package provides the common files needed by all QEMU targets %package guest-agent Summary: QEMU guest agent Requires(post): systemd-units Requires(preun): systemd-units Requires(postun): systemd-units %description guest-agent This package provides an agent to run inside guests, which communicates with the host over a virtio-serial channel named "org.qemu.guest_agent.0" This package does not need to be installed on the host OS. %package img Summary: QEMU command line tool for manipulating disk images %description img This package provides a command line tool for manipulating disk images %package -n ivshmem-tools Summary: Client and server for QEMU ivshmem device %description -n ivshmem-tools This package provides client and server tools for QEMU's ivshmem device. %package block-curl Summary: QEMU CURL block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-curl This package provides the additional CURL block driver for QEMU. Install this package if you want to access remote disks over http, https, ftp and other transports provided by the CURL library. %package block-dmg Summary: QEMU block driver for DMG disk images Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-dmg This package provides the additional DMG block driver for QEMU. Install this package if you want to open '.dmg' files. %package block-gluster Summary: QEMU Gluster block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-gluster This package provides the additional Gluster block driver for QEMU. Install this package if you want to access remote Gluster storage. %package block-iscsi Summary: QEMU iSCSI block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-iscsi This package provides the additional iSCSI block driver for QEMU. Install this package if you want to access iSCSI volumes. %package block-nfs Summary: QEMU NFS block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-nfs This package provides the additional NFS block driver for QEMU. Install this package if you want to access remote NFS storage. %package block-rbd Summary: QEMU Ceph/RBD block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-rbd This package provides the additional Ceph/RBD block driver for QEMU. Install this package if you want to access remote Ceph volumes using the rbd protocol. %package block-ssh Summary: QEMU SSH block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-ssh This package provides the additional SSH block driver for QEMU. Install this package if you want to access remote disks using the Secure Shell (SSH) protocol. %package audio-alsa Summary: QEMU ALSA audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-alsa This package provides the additional ALSA audio driver for QEMU. %package audio-oss Summary: QEMU OSS audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-oss This package provides the additional OSS audio driver for QEMU. %package audio-pa Summary: QEMU PulseAudio audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-pa This package provides the additional PulseAudi audio driver for QEMU. %package audio-sdl Summary: QEMU SDL audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-sdl This package provides the additional SDL audio driver for QEMU. %package ui-curses Summary: QEMU curses UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description ui-curses This package provides the additional curses UI for QEMU. %package ui-gtk Summary: QEMU GTK UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description ui-gtk This package provides the additional GTK UI for QEMU. %package ui-sdl Summary: QEMU SDL UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description ui-sdl This package provides the additional SDL UI for QEMU. %if %{have_kvm} %package kvm Summary: QEMU metapackage for KVM support Requires: qemu-%{kvm_package} = %{epoch}:%{version}-%{release} %description kvm This is a meta-package that provides a qemu-system- package for native architectures where kvm can be enabled. For example, in an x86 system, this will install qemu-system-x86 %package kvm-core Summary: QEMU metapackage for KVM support Requires: qemu-%{kvm_package}-core = %{epoch}:%{version}-%{release} %description kvm-core This is a meta-package that provides a qemu-system--core package for native architectures where kvm can be enabled. For example, in an x86 system, this will install qemu-system-x86-core %endif %package user Summary: QEMU user mode emulation of qemu targets Requires: %{name}-common = %{epoch}:%{version}-%{release} # On upgrade, make qemu-user get replaced with qemu-user + qemu-user-binfmt Obsoletes: %{name}-user < 2:2.6.0-5%{?dist} %description user This package provides the user mode emulation of qemu targets %package user-binfmt Summary: QEMU user mode emulation of qemu targets Requires: %{name}-user = %{epoch}:%{version}-%{release} Requires(post): systemd-units Requires(postun): systemd-units # qemu-user-binfmt + qemu-user-static both provide binfmt rules Conflicts: %{name}-user-static # On upgrade, make qemu-user get replaced with qemu-user + qemu-user-binfmt Obsoletes: %{name}-user < 2:2.6.0-5%{?dist} %description user-binfmt This package provides the user mode emulation of qemu targets %if %{user_static} %package user-static Summary: QEMU user mode emulation of qemu targets static build Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires(post): systemd-units Requires(postun): systemd-units # qemu-user-binfmt + qemu-user-static both provide binfmt rules Conflicts: %{name}-user-binfmt Provides: %{name}-user-binfmt %description user-static This package provides the user mode emulation of qemu targets built as static binaries %endif %package system-aarch64 Summary: QEMU system emulator for AArch64 Requires: %{name}-system-aarch64-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-aarch64 This package provides the QEMU system emulator for AArch64. %package system-aarch64-core Summary: QEMU system emulator for AArch64 Requires: %{name}-common = %{epoch}:%{version}-%{release} %if 0%{?have_edk2:1} Requires: edk2-aarch64 %endif %description system-aarch64-core This package provides the QEMU system emulator for AArch64. %package system-alpha Summary: QEMU system emulator for Alpha Requires: %{name}-system-alpha-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-alpha This package provides the QEMU system emulator for Alpha systems. %package system-alpha-core Summary: QEMU system emulator for Alpha Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-alpha-core This package provides the QEMU system emulator for Alpha systems. %package system-arm Summary: QEMU system emulator for ARM Requires: %{name}-system-arm-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-arm This package provides the QEMU system emulator for ARM systems. %package system-arm-core Summary: QEMU system emulator for ARM Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-arm-core This package provides the QEMU system emulator for ARM boards. %package system-cris Summary: QEMU system emulator for CRIS Requires: %{name}-system-cris-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-cris This package provides the system emulator for CRIS systems. %package system-cris-core Summary: QEMU system emulator for CRIS Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-cris-core This package provides the system emulator for CRIS boards. %package system-hppa Summary: QEMU system emulator for HPPA Requires: %{name}-system-hppa-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-hppa This package provides the QEMU system emulator for HPPA. %package system-hppa-core Summary: QEMU system emulator for hppa Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-hppa-core This package provides the QEMU system emulator for HPPA. %package system-lm32 Summary: QEMU system emulator for LatticeMico32 Requires: %{name}-system-lm32-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-lm32 This package provides the QEMU system emulator for LatticeMico32 boards. %package system-lm32-core Summary: QEMU system emulator for LatticsMico32 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-lm32-core This package provides the QEMU system emulator for LatticeMico32 boards. %package system-m68k Summary: QEMU system emulator for ColdFire (m68k) Requires: %{name}-system-m68k-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-m68k This package provides the QEMU system emulator for ColdFire boards. %package system-m68k-core Summary: QEMU system emulator for ColdFire (m68k) Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-m68k-core This package provides the QEMU system emulator for ColdFire boards. %package system-microblaze Summary: QEMU system emulator for Microblaze Requires: %{name}-system-microblaze-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-microblaze This package provides the QEMU system emulator for Microblaze boards. %package system-microblaze-core Summary: QEMU system emulator for Microblaze Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-microblaze-core This package provides the QEMU system emulator for Microblaze boards. %package system-mips Summary: QEMU system emulator for MIPS Requires: %{name}-system-mips-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-mips This package provides the QEMU system emulator for MIPS systems. %package system-mips-core Summary: QEMU system emulator for MIPS Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-mips-core This package provides the QEMU system emulator for MIPS systems. %package system-moxie Summary: QEMU system emulator for Moxie Requires: %{name}-system-moxie-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-moxie This package provides the QEMU system emulator for Moxie boards. %package system-moxie-core Summary: QEMU system emulator for Moxie Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-moxie-core This package provides the QEMU system emulator for Moxie boards. %package system-nios2 Summary: QEMU system emulator for nios2 Requires: %{name}-system-nios2-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-nios2 This package provides the QEMU system emulator for NIOS2. %package system-nios2-core Summary: QEMU system emulator for nios2 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-nios2-core This package provides the QEMU system emulator for NIOS2. %package system-or1k Summary: QEMU system emulator for OpenRisc32 Requires: %{name}-system-or1k-core = %{epoch}:%{version}-%{release} Obsoletes: %{name}-system-or32 < 2:2.9.0 %{requires_all_modules} %description system-or1k This package provides the QEMU system emulator for OpenRisc32 boards. %package system-or1k-core Summary: QEMU system emulator for OpenRisc32 Requires: %{name}-common = %{epoch}:%{version}-%{release} Obsoletes: %{name}-system-or32-core < 2:2.9.0 %description system-or1k-core This package provides the QEMU system emulator for OpenRisc32 boards. %package system-ppc Summary: QEMU system emulator for PPC Requires: %{name}-system-ppc-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-ppc This package provides the QEMU system emulator for PPC and PPC64 systems. %package system-ppc-core Summary: QEMU system emulator for PPC Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: openbios Requires: SLOF Requires: seavgabios-bin %description system-ppc-core This package provides the QEMU system emulator for PPC and PPC64 systems. %package system-riscv Summary: QEMU system emulator for RISC-V Requires: %{name}-system-riscv-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-riscv This package provides the QEMU system emulator for RISC-V systems. %package system-riscv-core Summary: QEMU system emulator for RISC-V Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-riscv-core This package provides the QEMU system emulator for RISC-V systems. %package system-s390x Summary: QEMU system emulator for S390 Requires: %{name}-system-s390x-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-s390x This package provides the QEMU system emulator for S390 systems. %package system-s390x-core Summary: QEMU system emulator for S390 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-s390x-core This package provides the QEMU system emulator for S390 systems. %package system-sh4 Summary: QEMU system emulator for SH4 Requires: %{name}-system-sh4-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-sh4 This package provides the QEMU system emulator for SH4 boards. %package system-sh4-core Summary: QEMU system emulator for SH4 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-sh4-core This package provides the QEMU system emulator for SH4 boards. %package system-sparc Summary: QEMU system emulator for SPARC Requires: %{name}-system-sparc-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-sparc This package provides the QEMU system emulator for SPARC and SPARC64 systems. %package system-sparc-core Summary: QEMU system emulator for SPARC Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: openbios %description system-sparc-core This package provides the QEMU system emulator for SPARC and SPARC64 systems. %package system-tricore Summary: QEMU system emulator for tricore Requires: %{name}-system-tricore-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-tricore This package provides the QEMU system emulator for Tricore. %package system-tricore-core Summary: QEMU system emulator for tricore Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-tricore-core This package provides the QEMU system emulator for Tricore. %package system-unicore32 Summary: QEMU system emulator for Unicore32 Requires: %{name}-system-unicore32-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-unicore32 This package provides the QEMU system emulator for Unicore32 boards. %package system-unicore32-core Summary: QEMU system emulator for Unicore32 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-unicore32-core This package provides the QEMU system emulator for Unicore32 boards. %package system-x86 Summary: QEMU system emulator for x86 Requires: %{name}-system-x86-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-x86 This package provides the QEMU system emulator for x86. When being run in a x86 machine that supports it, this package also provides the KVM virtualization platform. %package system-x86-core Summary: QEMU system emulator for x86 Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: seabios-bin Requires: sgabios-bin Requires: seavgabios-bin %if 0%{?have_edk2:1} Requires: edk2-ovmf %endif %description system-x86-core This package provides the QEMU system emulator for x86. When being run in a x86 machine that supports it, this package also provides the KVM virtualization platform. %package system-xtensa Summary: QEMU system emulator for Xtensa Requires: %{name}-system-xtensa-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-xtensa This package provides the QEMU system emulator for Xtensa boards. %package system-xtensa-core Summary: QEMU system emulator for Xtensa Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-xtensa-core This package provides the QEMU system emulator for Xtensa boards. %prep %setup -q -n qemu-%{version}%{?rcstr} %autopatch -p1 %build # drop -g flag to prevent memory exhaustion by linker %ifarch s390 %global optflags %(echo %{optflags} | sed 's/-g//') sed -i.debug 's/"-g $CFLAGS"/"$CFLAGS"/g' configure %endif # OOM killer breaks builds with parallel make on s390(x) %ifarch s390 s390x %global _smp_mflags %{nil} %endif # --build-id option is used for giving info to the debug packages. extraldflags="-Wl,--build-id"; buildldflags="VL_LDFLAGS=-Wl,--build-id" # As of qemu 2.1, --enable-trace-backends supports multiple backends, # but there's a performance impact for non-dtrace so we don't use them tracebackends="dtrace" %if 0%{?have_spice:1} %global spiceflag --enable-spice %else %global spiceflag --disable-spice %endif run_configure() { ../configure \ --prefix=%{_prefix} \ --libdir=%{_libdir} \ --sysconfdir=%{_sysconfdir} \ --localstatedir=%{_localstatedir} \ --libexecdir=%{_libexecdir} \ --interp-prefix=%{_prefix}/qemu-%%M \ --with-pkgversion=%{name}-%{version}-%{release} \ --disable-strip \ --disable-werror \ --enable-kvm \ --python=/usr/bin/python3 \ %ifarch s390 %{mips64} --enable-tcg-interpreter \ %endif --enable-trace-backend=$tracebackends \ --extra-ldflags="$extraldflags -Wl,-z,relro -Wl,-z,now" \ --extra-cflags="%{optflags}" \ "$@" || cat config.log } mkdir build-dynamic pushd build-dynamic run_configure \ --enable-system \ --enable-linux-user \ --enable-pie \ --enable-modules \ --audio-drv-list=pa,sdl,alsa,oss \ --tls-priority=@QEMU,SYSTEM \ --enable-mpath \ %{spiceflag} \ --with-sdlabi="2.0" \ --with-gtkabi="3.0" echo "config-host.mak contents:" echo "===" cat config-host.mak echo "===" make V=1 %{?_smp_mflags} $buildldflags popd %if %{user_static} mkdir build-static pushd build-static run_configure \ --disable-system \ --enable-linux-user \ --static \ --disable-pie \ --disable-sdl \ --disable-gtk \ --disable-spice \ --disable-tools \ --disable-guest-agent \ --disable-guest-agent-msi \ --disable-curses \ --disable-curl \ --disable-gnutls \ --disable-gcrypt \ --disable-nettle \ --disable-cap-ng \ --disable-brlapi \ --disable-mpath \ --disable-libnfs \ --disable-capstone make V=1 %{?_smp_mflags} $buildldflags popd %endif %install %global _udevdir /lib/udev/rules.d %global qemudocdir %{_docdir}/%{name} mkdir -p %{buildroot}%{_udevdir} mkdir -p %{buildroot}%{_unitdir} mkdir -p %{buildroot}%{_sysconfdir}/qemu # Install qemu-guest-agent service and udev rules install -m 0644 %{_sourcedir}/qemu-guest-agent.service %{buildroot}%{_unitdir} install -m 0644 %{_sourcedir}/qemu-ga.sysconfig %{buildroot}%{_sysconfdir}/sysconfig/qemu-ga install -m 0644 %{_sourcedir}/99-qemu-guest-agent.rules %{buildroot}%{_udevdir} mkdir -p %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook.d install -p -m 0755 scripts/qemu-guest-agent/fsfreeze-hook %{buildroot}%{_sysconfdir}/qemu-ga install -p -m 0644 scripts/qemu-guest-agent/fsfreeze-hook.d/*.sample %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook.d/ mkdir -p %{buildroot}%{_localstatedir}/log touch %{buildroot}%{_localstatedir}/log/qga-fsfreeze-hook.log # Install qemu-pr-helper service install -m 0644 %{_sourcedir}/qemu-pr-helper.service %{buildroot}%{_unitdir} install -m 0644 %{_sourcedir}/qemu-pr-helper.socket %{buildroot}%{_unitdir} %ifarch %{power64} install -d %{buildroot}%{_sysconfdir}/security/limits.d install -m 0644 %{_sourcedir}/95-kvm-ppc64-memlock.conf %{buildroot}%{_sysconfdir}/security/limits.d %endif # Install kvm specific bits %if %{have_kvm} mkdir -p %{buildroot}%{_bindir}/ %endif %if %{user_static} pushd build-static make DESTDIR=%{buildroot} install # Give all QEMU user emulators a -static suffix for src in %{buildroot}%{_bindir}/qemu-* do mv $src $src-static done # Update trace files to match for src in %{buildroot}%{_datadir}/systemtap/tapset/qemu-*.stp do dst=`echo $src | sed -e 's/.stp/-static.stp/'` mv $src $dst perl -i -p -e 's/(qemu-\w+)/$1-static/g; s/(qemu\.user\.\w+)/$1.static/g' $dst done popd %endif pushd build-dynamic make DESTDIR=%{buildroot} install popd %find_lang %{name} chmod -x %{buildroot}%{_mandir}/man1/* install -D -p -m 0644 -t %{buildroot}%{qemudocdir} Changelog README COPYING COPYING.LIB LICENSE for emu in %{buildroot}%{_bindir}/qemu-system-*; do ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/$(basename $emu).1.gz done %if 0%{?need_qemu_kvm} install -m 0755 %{_sourcedir}/qemu-kvm.sh %{buildroot}%{_bindir}/qemu-kvm ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/qemu-kvm.1.gz install -D -p -m 0644 %{_sourcedir}/kvm-x86.modprobe.conf %{buildroot}%{_sysconfdir}/modprobe.d/kvm.conf %endif install -D -p -m 0644 qemu.sasl %{buildroot}%{_sysconfdir}/sasl2/qemu.conf # XXX With qemu 2.11 we can probably drop this symlinking with use of # configure --firmwarepath, see qemu git 3d5eecab4 # Provided by package openbios rm -rf %{buildroot}%{_datadir}/%{name}/openbios-ppc rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc32 rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc64 # Provided by package SLOF rm -rf %{buildroot}%{_datadir}/%{name}/slof.bin # Provided by package ipxe rm -rf %{buildroot}%{_datadir}/%{name}/pxe*rom rm -rf %{buildroot}%{_datadir}/%{name}/efi*rom # Provided by package seavgabios rm -rf %{buildroot}%{_datadir}/%{name}/vgabios*bin # Provided by package seabios rm -rf %{buildroot}%{_datadir}/%{name}/bios.bin rm -rf %{buildroot}%{_datadir}/%{name}/bios-256k.bin # Provided by package sgabios rm -rf %{buildroot}%{_datadir}/%{name}/sgabios.bin pxe_link() { ln -s ../ipxe/$2.rom %{buildroot}%{_datadir}/%{name}/pxe-$1.rom ln -s ../ipxe.efi/$2.rom %{buildroot}%{_datadir}/%{name}/efi-$1.rom } pxe_link e1000 8086100e pxe_link ne2k_pci 10ec8029 pxe_link pcnet 10222000 pxe_link rtl8139 10ec8139 pxe_link virtio 1af41000 pxe_link eepro100 80861209 pxe_link e1000e 808610d3 pxe_link vmxnet3 15ad07b0 rom_link() { ln -s $1 %{buildroot}%{_datadir}/%{name}/$2 } rom_link ../seavgabios/vgabios-isavga.bin vgabios.bin rom_link ../seavgabios/vgabios-cirrus.bin vgabios-cirrus.bin rom_link ../seavgabios/vgabios-qxl.bin vgabios-qxl.bin rom_link ../seavgabios/vgabios-stdvga.bin vgabios-stdvga.bin rom_link ../seavgabios/vgabios-vmware.bin vgabios-vmware.bin rom_link ../seavgabios/vgabios-virtio.bin vgabios-virtio.bin rom_link ../seabios/bios.bin bios.bin rom_link ../seabios/bios-256k.bin bios-256k.bin rom_link ../sgabios/sgabios.bin sgabios.bin # Install binfmt %global binfmt_dir %{buildroot}%{_exec_prefix}/lib/binfmt.d mkdir -p %{binfmt_dir} ./scripts/qemu-binfmt-conf.sh --systemd ALL --exportdir %{binfmt_dir} --qemu-path %{_bindir} for i in %{binfmt_dir}/*; do mv $i $(echo $i | sed 's/.conf/-dynamic.conf/') done %if %{user_static} for regularfmt in %{binfmt_dir}/*; do staticfmt="$(echo $regularfmt | sed 's/-dynamic/-static/g')" cat $regularfmt | tr -d '\n' | sed "s/:$/-static:F/" > $staticfmt done %endif # Install rules to use the bridge helper with libvirt's virbr0 install -m 0644 %{_sourcedir}/bridge.conf %{buildroot}%{_sysconfdir}/qemu # When building using 'rpmbuild' or 'fedpkg local', RPATHs can be left in # the binaries and libraries (although this doesn't occur when # building in Koji, for some unknown reason). Some discussion here: # # https://lists.fedoraproject.org/pipermail/devel/2013-November/192553.html # # In any case it should always be safe to remove RPATHs from # the final binaries: for f in %{buildroot}%{_bindir}/* %{buildroot}%{_libdir}/* \ %{buildroot}%{_libexecdir}/*; do if file $f | grep -q ELF | grep -q -i shared; then chrpath --delete $f; fi done # We need to make the modules executable else # RPM won't pick up their dependencies. chmod +x %{buildroot}%{_libdir}/qemu/*.so %check # Tests are hanging on s390 as of 2.3.0 # https://bugzilla.redhat.com/show_bug.cgi?id=1206057 # Tests seem to be a recurring problem on s390, so I'd suggest just leaving # it disabled. %global archs_skip_tests s390 %global archs_ignore_test_failures 0 pushd build-dynamic %ifnarch %{archs_skip_tests} # Check the binary runs (see eg RHBZ#998722). b="./x86_64-softmmu/qemu-system-x86_64" if [ -x "$b" ]; then "$b" -help; fi %ifarch %{archs_ignore_test_failures} make check V=1 || : %else make check V=1 %endif %if 0%{?hostqemu:1} # Sanity-check current kernel can boot on this qemu. # The results are advisory only. qemu-sanity-check --qemu=%{?hostqemu} ||: %endif %endif # archs_skip_tests popd %post common getent group kvm >/dev/null || groupadd -g 36 -r kvm getent group qemu >/dev/null || groupadd -g 107 -r qemu getent passwd qemu >/dev/null || \ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \ -c "qemu user" qemu %post user-binfmt /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-binfmt /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %if %{user_static} %post user-static /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %endif %post guest-agent %systemd_post qemu-guest-agent.service %preun guest-agent %systemd_preun qemu-guest-agent.service %postun guest-agent %systemd_postun_with_restart qemu-guest-agent.service %files # Deliberately empty %files common -f %{name}.lang %dir %{qemudocdir} %doc %{qemudocdir}/Changelog %doc %{qemudocdir}/COPYING %doc %{qemudocdir}/COPYING.LIB %doc %{qemudocdir}/LICENSE %doc %{qemudocdir}/qemu-doc.html %doc %{qemudocdir}/qemu-doc.txt %doc %{qemudocdir}/qemu-ga-ref.html %doc %{qemudocdir}/qemu-ga-ref.txt %doc %{qemudocdir}/qemu-qmp-ref.html %doc %{qemudocdir}/qemu-qmp-ref.txt %doc %{qemudocdir}/README %dir %{_datadir}/%{name}/ %{_datadir}/%{name}/qemu-icon.bmp %{_datadir}/%{name}/qemu_logo_no_text.svg %{_datadir}/%{name}/keymaps/ %{_datadir}/%{name}/trace-events-all %{_datadir}/%{name}/vgabios.bin %{_datadir}/%{name}/vgabios-cirrus.bin %{_datadir}/%{name}/vgabios-qxl.bin %{_datadir}/%{name}/vgabios-stdvga.bin %{_datadir}/%{name}/vgabios-vmware.bin %{_datadir}/%{name}/vgabios-virtio.bin %{_datadir}/%{name}/pxe-e1000.rom %{_datadir}/%{name}/efi-e1000.rom %{_datadir}/%{name}/pxe-e1000e.rom %{_datadir}/%{name}/efi-e1000e.rom %{_datadir}/%{name}/pxe-eepro100.rom %{_datadir}/%{name}/efi-eepro100.rom %{_datadir}/%{name}/pxe-ne2k_pci.rom %{_datadir}/%{name}/efi-ne2k_pci.rom %{_datadir}/%{name}/pxe-pcnet.rom %{_datadir}/%{name}/efi-pcnet.rom %{_datadir}/%{name}/pxe-rtl8139.rom %{_datadir}/%{name}/efi-rtl8139.rom %{_datadir}/%{name}/pxe-virtio.rom %{_datadir}/%{name}/efi-virtio.rom %{_datadir}/%{name}/pxe-vmxnet3.rom %{_datadir}/%{name}/efi-vmxnet3.rom %{_mandir}/man1/qemu.1* %{_mandir}/man1/virtfs-proxy-helper.1* %{_mandir}/man7/qemu-block-drivers.7* %{_mandir}/man7/qemu-ga-ref.7* %{_mandir}/man7/qemu-qmp-ref.7* %{_bindir}/virtfs-proxy-helper %{_bindir}/qemu-keymap %{_bindir}/qemu-pr-helper %{_unitdir}/qemu-pr-helper.service %{_unitdir}/qemu-pr-helper.socket %attr(4755, root, root) %{_libexecdir}/qemu-bridge-helper %config(noreplace) %{_sysconfdir}/sasl2/qemu.conf %dir %{_sysconfdir}/qemu %config(noreplace) %{_sysconfdir}/qemu/bridge.conf %dir %{_libdir}/qemu %files guest-agent %{_bindir}/qemu-ga %{_mandir}/man8/qemu-ga.8* %{_unitdir}/qemu-guest-agent.service %{_udevdir}/99-qemu-guest-agent.rules %config(noreplace) %{_sysconfdir}/sysconfig/qemu-ga %{_sysconfdir}/qemu-ga %ghost %{_localstatedir}/log/qga-fsfreeze-hook.log %files img %{_bindir}/qemu-img %{_bindir}/qemu-io %{_bindir}/qemu-nbd %{_mandir}/man1/qemu-img.1* %{_mandir}/man8/qemu-nbd.8* %files block-curl %{_libdir}/qemu/block-curl.so %files block-dmg %{_libdir}/qemu/block-dmg-bz2.so %files block-gluster %{_libdir}/qemu/block-gluster.so %files block-iscsi %{_libdir}/qemu/block-iscsi.so %files block-nfs %{_libdir}/qemu/block-nfs.so %files block-rbd %{_libdir}/qemu/block-rbd.so %files block-ssh %{_libdir}/qemu/block-ssh.so %files audio-alsa %{_libdir}/qemu/audio-alsa.so %files audio-oss %{_libdir}/qemu/audio-oss.so %files audio-pa %{_libdir}/qemu/audio-pa.so %files audio-sdl %{_libdir}/qemu/audio-sdl.so %files ui-curses %{_libdir}/qemu/ui-curses.so %files ui-gtk %{_libdir}/qemu/ui-gtk.so %files ui-sdl %{_libdir}/qemu/ui-sdl.so %files -n ivshmem-tools %{_bindir}/ivshmem-client %{_bindir}/ivshmem-server %if %{have_kvm} %files kvm # Deliberately empty %files kvm-core # Deliberately empty %endif %files user %{_bindir}/qemu-i386 %{_bindir}/qemu-x86_64 %{_bindir}/qemu-aarch64 %{_bindir}/qemu-aarch64_be %{_bindir}/qemu-alpha %{_bindir}/qemu-arm %{_bindir}/qemu-armeb %{_bindir}/qemu-cris %{_bindir}/qemu-hppa %{_bindir}/qemu-m68k %{_bindir}/qemu-microblaze %{_bindir}/qemu-microblazeel %{_bindir}/qemu-mips %{_bindir}/qemu-mipsel %{_bindir}/qemu-mips64 %{_bindir}/qemu-mips64el %{_bindir}/qemu-mipsn32 %{_bindir}/qemu-mipsn32el %{_bindir}/qemu-nios2 %{_bindir}/qemu-or1k %{_bindir}/qemu-ppc %{_bindir}/qemu-ppc64 %{_bindir}/qemu-ppc64abi32 %{_bindir}/qemu-ppc64le %{_bindir}/qemu-riscv32 %{_bindir}/qemu-riscv64 %{_bindir}/qemu-s390x %{_bindir}/qemu-sh4 %{_bindir}/qemu-sh4eb %{_bindir}/qemu-sparc %{_bindir}/qemu-sparc32plus %{_bindir}/qemu-sparc64 %{_bindir}/qemu-tilegx %{_bindir}/qemu-xtensa %{_bindir}/qemu-xtensaeb %{_datadir}/systemtap/tapset/qemu-i386.stp %{_datadir}/systemtap/tapset/qemu-i386-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-x86_64.stp %{_datadir}/systemtap/tapset/qemu-x86_64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-aarch64.stp %{_datadir}/systemtap/tapset/qemu-aarch64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-alpha.stp %{_datadir}/systemtap/tapset/qemu-alpha-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-arm.stp %{_datadir}/systemtap/tapset/qemu-arm-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-armeb.stp %{_datadir}/systemtap/tapset/qemu-armeb-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-cris.stp %{_datadir}/systemtap/tapset/qemu-cris-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-hppa.stp %{_datadir}/systemtap/tapset/qemu-hppa-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-m68k.stp %{_datadir}/systemtap/tapset/qemu-m68k-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-microblaze.stp %{_datadir}/systemtap/tapset/qemu-microblaze-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-microblazeel.stp %{_datadir}/systemtap/tapset/qemu-microblazeel-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mips.stp %{_datadir}/systemtap/tapset/qemu-mips-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mipsel.stp %{_datadir}/systemtap/tapset/qemu-mipsel-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mips64.stp %{_datadir}/systemtap/tapset/qemu-mips64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mips64el.stp %{_datadir}/systemtap/tapset/qemu-mips64el-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mipsn32.stp %{_datadir}/systemtap/tapset/qemu-mipsn32-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-nios2.stp %{_datadir}/systemtap/tapset/qemu-nios2-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-or1k.stp %{_datadir}/systemtap/tapset/qemu-or1k-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-ppc.stp %{_datadir}/systemtap/tapset/qemu-ppc-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-ppc64.stp %{_datadir}/systemtap/tapset/qemu-ppc64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-ppc64abi32.stp %{_datadir}/systemtap/tapset/qemu-ppc64abi32-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-ppc64le.stp %{_datadir}/systemtap/tapset/qemu-ppc64le-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-riscv32.stp %{_datadir}/systemtap/tapset/qemu-riscv32-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-riscv64.stp %{_datadir}/systemtap/tapset/qemu-riscv64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-s390x.stp %{_datadir}/systemtap/tapset/qemu-s390x-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sh4.stp %{_datadir}/systemtap/tapset/qemu-sh4-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sh4eb.stp %{_datadir}/systemtap/tapset/qemu-sh4eb-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sparc.stp %{_datadir}/systemtap/tapset/qemu-sparc-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sparc64.stp %{_datadir}/systemtap/tapset/qemu-sparc64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-tilegx.stp %{_datadir}/systemtap/tapset/qemu-tilegx-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-xtensa.stp %{_datadir}/systemtap/tapset/qemu-xtensa-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb-simpletrace.stp %files user-binfmt %{_exec_prefix}/lib/binfmt.d/qemu-*-dynamic.conf %if %{user_static} %files user-static # Just use wildcard matches here: we will catch any new/missing files # in the qemu-user filelists %{_exec_prefix}/lib/binfmt.d/qemu-*-static.conf %{_bindir}/qemu-*-static %{_datadir}/systemtap/tapset/qemu-*-static.stp %endif %files system-aarch64 %files system-aarch64-core %{_bindir}/qemu-system-aarch64 %{_datadir}/systemtap/tapset/qemu-system-aarch64*.stp %{_mandir}/man1/qemu-system-aarch64.1* %files system-alpha %files system-alpha-core %{_bindir}/qemu-system-alpha %{_datadir}/systemtap/tapset/qemu-system-alpha*.stp %{_mandir}/man1/qemu-system-alpha.1* %{_datadir}/%{name}/palcode-clipper %files system-arm %files system-arm-core %{_bindir}/qemu-system-arm %{_datadir}/systemtap/tapset/qemu-system-arm*.stp %{_mandir}/man1/qemu-system-arm.1* %files system-cris %files system-cris-core %{_bindir}/qemu-system-cris %{_datadir}/systemtap/tapset/qemu-system-cris*.stp %{_mandir}/man1/qemu-system-cris.1* %files system-hppa %files system-hppa-core %{_bindir}/qemu-system-hppa %{_datadir}/systemtap/tapset/qemu-system-hppa*.stp %{_mandir}/man1/qemu-system-hppa.1* %{_datadir}/%{name}/hppa-firmware.img %files system-lm32 %files system-lm32-core %{_bindir}/qemu-system-lm32 %{_datadir}/systemtap/tapset/qemu-system-lm32*.stp %{_mandir}/man1/qemu-system-lm32.1* %files system-m68k %files system-m68k-core %{_bindir}/qemu-system-m68k %{_datadir}/systemtap/tapset/qemu-system-m68k*.stp %{_mandir}/man1/qemu-system-m68k.1* %files system-microblaze %files system-microblaze-core %{_bindir}/qemu-system-microblaze %{_bindir}/qemu-system-microblazeel %{_datadir}/systemtap/tapset/qemu-system-microblaze*.stp %{_mandir}/man1/qemu-system-microblaze.1* %{_mandir}/man1/qemu-system-microblazeel.1* %{_datadir}/%{name}/petalogix*.dtb %files system-mips %files system-mips-core %{_bindir}/qemu-system-mips %{_bindir}/qemu-system-mipsel %{_bindir}/qemu-system-mips64 %{_bindir}/qemu-system-mips64el %{_datadir}/systemtap/tapset/qemu-system-mips*.stp %{_mandir}/man1/qemu-system-mips.1* %{_mandir}/man1/qemu-system-mipsel.1* %{_mandir}/man1/qemu-system-mips64el.1* %{_mandir}/man1/qemu-system-mips64.1* %files system-moxie %files system-moxie-core %{_bindir}/qemu-system-moxie %{_datadir}/systemtap/tapset/qemu-system-moxie*.stp %{_mandir}/man1/qemu-system-moxie.1* %files system-nios2 %files system-nios2-core %{_bindir}/qemu-system-nios2 %{_datadir}/systemtap/tapset/qemu-system-nios2*.stp %{_mandir}/man1/qemu-system-nios2.1* %files system-or1k %files system-or1k-core %{_bindir}/qemu-system-or1k %{_datadir}/systemtap/tapset/qemu-system-or1k*.stp %{_mandir}/man1/qemu-system-or1k.1* %files system-ppc %files system-ppc-core %{_bindir}/qemu-system-ppc %{_bindir}/qemu-system-ppc64 %{_bindir}/qemu-system-ppcemb %{_datadir}/systemtap/tapset/qemu-system-ppc*.stp %{_mandir}/man1/qemu-system-ppc.1* %{_mandir}/man1/qemu-system-ppc64.1* %{_mandir}/man1/qemu-system-ppcemb.1* %{_datadir}/%{name}/bamboo.dtb %{_datadir}/%{name}/canyonlands.dtb %{_datadir}/%{name}/ppc_rom.bin %{_datadir}/%{name}/qemu_vga.ndrv %{_datadir}/%{name}/skiboot.lid %{_datadir}/%{name}/spapr-rtas.bin %{_datadir}/%{name}/u-boot.e500 %{_datadir}/%{name}/u-boot-sam460-20100605.bin %ifarch %{power64} %{_sysconfdir}/security/limits.d/95-kvm-ppc64-memlock.conf %endif %files system-riscv %files system-riscv-core %{_bindir}/qemu-system-riscv32 %{_bindir}/qemu-system-riscv64 %{_datadir}/systemtap/tapset/qemu-system-riscv*.stp %{_mandir}/man1/qemu-system-riscv*.1* %files system-s390x %files system-s390x-core %{_bindir}/qemu-system-s390x %{_datadir}/systemtap/tapset/qemu-system-s390x*.stp %{_mandir}/man1/qemu-system-s390x.1* %{_datadir}/%{name}/s390-ccw.img %{_datadir}/%{name}/s390-netboot.img %files system-sh4 %files system-sh4-core %{_bindir}/qemu-system-sh4 %{_bindir}/qemu-system-sh4eb %{_datadir}/systemtap/tapset/qemu-system-sh4*.stp %{_mandir}/man1/qemu-system-sh4.1* %{_mandir}/man1/qemu-system-sh4eb.1* %files system-sparc %files system-sparc-core %{_bindir}/qemu-system-sparc %{_bindir}/qemu-system-sparc64 %{_datadir}/systemtap/tapset/qemu-system-sparc*.stp %{_mandir}/man1/qemu-system-sparc.1* %{_mandir}/man1/qemu-system-sparc64.1* %{_datadir}/%{name}/QEMU,tcx.bin %{_datadir}/%{name}/QEMU,cgthree.bin %files system-tricore %files system-tricore-core %{_bindir}/qemu-system-tricore %{_datadir}/systemtap/tapset/qemu-system-tricore*.stp %{_mandir}/man1/qemu-system-tricore.1* %files system-unicore32 %files system-unicore32-core %{_bindir}/qemu-system-unicore32 %{_datadir}/systemtap/tapset/qemu-system-unicore32*.stp %{_mandir}/man1/qemu-system-unicore32.1* %files system-x86 %files system-x86-core %{_bindir}/qemu-system-i386 %{_bindir}/qemu-system-x86_64 %{_datadir}/systemtap/tapset/qemu-system-i386*.stp %{_datadir}/systemtap/tapset/qemu-system-x86_64*.stp %{_mandir}/man1/qemu-system-i386.1* %{_mandir}/man1/qemu-system-x86_64.1* %{_datadir}/%{name}/bios.bin %{_datadir}/%{name}/bios-256k.bin %{_datadir}/%{name}/sgabios.bin %{_datadir}/%{name}/linuxboot.bin %{_datadir}/%{name}/linuxboot_dma.bin %{_datadir}/%{name}/multiboot.bin %{_datadir}/%{name}/kvmvapic.bin %if 0%{?need_qemu_kvm} %{_bindir}/qemu-kvm %{_mandir}/man1/qemu-kvm.1* %config(noreplace) %{_sysconfdir}/modprobe.d/kvm.conf %endif %files system-xtensa %files system-xtensa-core %{_bindir}/qemu-system-xtensa %{_bindir}/qemu-system-xtensaeb %{_datadir}/systemtap/tapset/qemu-system-xtensa*.stp %{_mandir}/man1/qemu-system-xtensa.1* %{_mandir}/man1/qemu-system-xtensaeb.1* %changelog * Mon Aug 13 2018 Cole Robinson - 2:3.0.0-0.2.rc3 - Drop ksm package, moved to ksmtuned srpm * Tue Jul 31 2018 Cole Robinson - 2:3.0.0-0.1.rc3 - Rebase to qemu-3.0.0-rc3 - Drop now unneeded s390x conf (bz #1609706) - Only install modprobe kvm.conf on x86 (bz #1517989) * Fri Jul 13 2018 Peter Robinson 2:2.12.0-4 - Rebuild for Xen 4.11 * Mon Jun 18 2018 Daniel P. Berrangé - 2:2.12.0-3 - New CPU features for speculative store bypass (CVE-2018-3639) * Tue Jun 05 2018 Cole Robinson - 2:2.12.0-2 - Fix qxl memslot_get_virt crashes (bz #1565354) * Mon Apr 30 2018 Cole Robinson - 2:2.12.0-1 - Update to qemu-2.12.0 GA * Mon Apr 16 2018 Richard W.M. Jones - 2:2.12.0-0.7.rc3 - Update to qemu-2.12.0-rc3 - Remove upstream patch. - Fixes issues with partition / LV minimum alignment (RHBZ#1565714). * Thu Apr 05 2018 Cole Robinson - 2:2.12.0-0.6.rc2 - Update to qemu-2.12.0-rc2 * Wed Mar 28 2018 Cole Robinson - 2:2.12.0-0.5.rc1 - Update to qemu-2.12.0-rc1 * Mon Mar 26 2018 Cole Robinson - 2:2.12.0-0.4.rc0 - Enable missing tilegx, xtensa* qemu-user targets * Sun Mar 25 2018 Cole Robinson - 2:2.12.0-0.3.rc0 - Generate binfmt configs with qemu-binfmt-conf.sh * Fri Mar 23 2018 Cole Robinson - 2:2.12.0-0.2.rc0 - Fix audio and ui module RPM deps - Drop some arch restrictions for rdma, spice, xen, numactl - Fix hppa firmware packaging * Thu Mar 22 2018 Cole Robinson - 2:2.12.0-0.1.rc0 - Rebase to qemu-2.12.0-rc0 - Add hppa and riscv32/64 targets - Add audio and ui modules * Mon Mar 19 2018 Daniel P. Berrangé - 2:2.11.1-2 - Re-enable normal hardened build macros to fix ksmctl.c hardening - Don't strip _FORTIFY_SOURCE from compiler flags - Don't pass -pie as an extra ldflags when we use --enable-pie * Wed Feb 28 2018 Cole Robinson - 2:2.11.1-1 - Rebase to qemu 2.11.1 bugfix release * Tue Feb 27 2018 Daniel P. Berrange - 2:2.11.0-5 - Improve License tag - Honour CC/LD flags for ksmctl - Fix non-deterministic test failure - Use explicit "python2" binary to avoid "python" brokeness (rhbz#1550010) - Avoid breakage in TLS tests due to stricter crypto policies * Fri Feb 09 2018 Fedora Release Engineering - 2:2.11.0-4.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Thu Dec 21 2017 Daniel P. Berrange - 2:2.11.0-4 - Re-enable RBD on arm/ppc (rhbz #1528378) * Wed Dec 20 2017 Adam Williamson - 2:2.11.0-3 - Fix problem with typing some characters via VNC (LP#1738283) * Wed Dec 20 2017 Cole Robinson - 2:2.11.0-2 - Rebuild for xen 4.10 * Mon Dec 18 2017 Cole Robinson - 2:2.11.0-1 - Rebase to 2.11.0 GA * Mon Dec 04 2017 Cole Robinson - 2:2.11.0-0.3-rc3 - Rebase to 2.11.0-rc3 * Tue Nov 28 2017 Paolo Bonzini - 2:2.11.0-0.2.rc2 - Fix compilation - Upgrade qemu-ga packaging based on RHEL 7 * Mon Nov 20 2017 Cole Robinson - 2:2.11.0-0.1.rc1 - Rebase to 2.11.0-rc1 * Thu Oct 19 2017 Cole Robinson - 2:2.10.1-1 - Fix ppc64 KVM failure (bz #1501936) - CVE-2017-15038: 9p: information disclosure when reading extended attributes (bz #1499111) - CVE-2017-15268: potential memory exhaustion via websock connection to VNC (bz #1496882) * Tue Oct 17 2017 Paolo Bonzini - 2:2.10.0-7 - Update patch 1014 for new libmultipath/libmpathpersist API - Force build to fail if multipath is not available - Tighten permissions on the qemu-pr-helper socket * Mon Oct 9 2017 Daniel P. Berrange - 2:2.10.0-6 - Rebuild for libiscsi changed soname again * Tue Oct 03 2017 Paolo Bonzini - 2:2.10.0-5 - Rebuild with new libiscsi for iSER support * Thu Sep 28 2017 Paolo Bonzini - 2:2.10.0-4 - Stop using tcmalloc, glibc got faster * Fri Sep 22 2017 Paolo Bonzini - 2:2.10.0-3 - Backport persistent reservation manager in preparation for SELinux work - Fix previous patch * Mon Sep 18 2017 Nathaniel McCallum - 2:2.10.0-2 - Fix endianness of e_type in the ppc64le binfmt * Thu Sep 07 2017 Cole Robinson - 2:2.10.0-1 - Rebase to 2.10.0 GA * Tue Aug 29 2017 Nathaniel McCallum - 2:2.10.0-0.5.rc4 - Fix incorrect byte order in e_machine field in ppc64le binfmt (#1486379) * Fri Aug 25 2017 Cole Robinson - 2:2.10.0-0.4.rc4 - Rebase to 2.10.0-rc4 * Tue Aug 22 2017 Adam Williamson - 2:2.10.0-0.3.rc3 - Don't build against rdma on 32-bit ARM (#1484155) * Wed Aug 16 2017 Cole Robinson - 2:2.10.0-0.2.rc3 - Rebase to 2.10.0-rc3 * Thu Aug 03 2017 Cole Robinson - 2:2.10.0-0.1.rc1 - Rebase to 2.10.0-rc1 * Sun Jul 30 2017 Florian Weimer - 2:2.9.0-9 - Rebuild with binutils fix for ppc64le (#1475636) * Tue Jul 25 2017 Daniel Berrange - 2:2.9.0-8 - Disabled RBD on arm & ppc64 (rhbz #1474743) * Thu Jul 20 2017 Nathaniel McCallum - 2:2.9.0-7 - Fix binfmt dependencies and post scriptlets - Add binfmt for ppc64le * Wed Jul 19 2017 Daniel Berrange - 2:2.9.0-6 - Fixes for compat with Xen 4.9 * Tue Jul 18 2017 Nathaniel McCallum - 2:2.9.0-5 - Fix ucontext_t references * Tue Jul 18 2017 Daniel P. Berrange - 2:2.9.0-4 - Rebuild for changed Xen sonames * Wed Jul 12 2017 Cole Robinson - 2:2.9.0-3 - CVE-2017-8112: vmw_pvscsi: infinite loop in pvscsi_log2 (bz #1445622) - CVE-2017-8309: audio: host memory lekage via capture buffer (bz #1446520) - CVE-2017-8379: input: host memory lekage via keyboard events (bz #1446560) - CVE-2017-8380: scsi: megasas: out-of-bounds read in megasas_mmio_write (bz #1446578) - CVE-2017-7493: 9pfs: guest privilege escalation in virtfs mapped-file mode (bz #1451711) - CVE-2017-9503: megasas: null pointer dereference while processing megasas command (bz #1459478) - CVE-2017-10806: usb-redirect: stack buffer overflow in debug logging (bz #1468497) - CVE-2017-9524: nbd: segfault due to client non-negotiation (bz #1460172) - CVE-2017-10664: qemu-nbd: server breaks with SIGPIPE upon client abort (bz #1466192) * Mon May 22 2017 Richard W.M. Jones - 2:2.9.0-2 - Bump release and rebuild to try to fix _ZdlPvm symbol (see RHBZ#1452813). * Tue Apr 25 2017 Cole Robinson - 2:2.9.0-1 - Rebase to qemu-2.9.0 GA * Thu Apr 13 2017 Cole Robinson - 2:2.9.0-0.2-rc4 - Rebase to qemu-2.9.0-rc4 - Fix ipxe rom links for aarch64 * Sat Apr 08 2017 Richard W.M. Jones - 2:2.9.0-0.2-rc3 - Backport upstream fix for assertion when copy-on-read=true (RHBZ#1439922). * Tue Apr 04 2017 Cole Robinson - 2:2.9.0-0.1-rc3 - Rebase to qemu-2.9.0-rc3 * Wed Mar 29 2017 Cole Robinson - 2:2.9.0-0.1-rc2 - Rebase to qemu-2.9.0-rc2 - Add Obsoletes for or32-or1k rename (bz 1435016) - spec: Pull in vga and pxe roms for ppc64 (bz 1431403) * Tue Mar 21 2017 Cole Robinson - 2:2.9.0-0.1-rc1 - Rebase to qemu-2.9.0-rc1 * Wed Mar 15 2017 Cole Robinson - 2:2.9.0-0.1-rc0 * Rebase to qemu-2.9.0-rc0 * Mon Feb 20 2017 Daniel Berrange - 2:2.8.0-2 - Drop texi2html BR, since QEMU switched to using makeinfo back in 2010 * Sat Feb 11 2017 Fedora Release Engineering - 2:2.8.0-1.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Tue Dec 20 2016 Cole Robinson - 2:2.8.0-1 - Rebase to qemu-2.8.0 GA * Mon Dec 12 2016 Cole Robinson - 2:2.8.0-0.3-rc3 - Rebase to qemu-2.8.0-rc3 * Mon Dec 05 2016 Cole Robinson - 2:2.8.0-0.2-rc2 - Rebuild to pick up changed libxen* sonames * Mon Dec 05 2016 Cole Robinson - 2:2.8.0-0.1-rc2 - Rebase to qemu-2.8.0-rc2 * Mon Nov 28 2016 Paolo Bonzini - 2:2.7.0-10 - Do not build aarch64 with -fPIC anymore (rhbz 1232499) * Tue Nov 15 2016 Nathaniel McCallum - 2:2.7.0-9 - Clean up binfmt.d configuration files * Mon Nov 14 2016 Richard W.M. Jones - 2:2.7.0-8 - Create subpackages for modularized qemu block drivers (RHBZ#1393688). - Fix qemu-sanity-check. * Tue Oct 25 2016 Cole Robinson - 2:2.7.0-7 - Fix PPC64 build with memlock file (bz #1387601) * Wed Oct 19 2016 Bastien Nocera - 2:2.7.0-6 - Add "F" flag to static user emulators' binfmt, to make them available in containers (#1384615) - Also fixes the path of those emulators in the binfmt configurations * Wed Oct 19 2016 Cole Robinson - 2:2.7.0-5 - Fix nested PPC 'Unknown MMU model' error (bz #1374749) - Fix flickering display with boxes + wayland VM (bz #1266484) - Add ppc64 kvm memlock file (bz #1293024) * Sat Oct 15 2016 Cole Robinson - 2:2.7.0-4 - CVE-2016-7155: pvscsi: OOB read and infinite loop (bz #1373463) - CVE-2016-7156: pvscsi: infinite loop when building SG list (bz #1373480) - CVE-2016-7156: pvscsi: infinite loop when processing IO requests (bz #1373480) - CVE-2016-7170: vmware_vga: OOB stack memory access (bz #1374709) - CVE-2016-7157: mptsas: invalid memory access (bz #1373505) - CVE-2016-7466: usb: xhci memory leakage during device unplug (bz #1377838) - CVE-2016-7423: scsi: mptsas: OOB access (bz #1376777) - CVE-2016-7422: virtio: null pointer dereference (bz #1376756) - CVE-2016-7908: net: Infinite loop in mcf_fec_do_tx (bz #1381193) - CVE-2016-8576: usb: xHCI: infinite loop vulnerability (bz #1382322) - CVE-2016-7995: usb: hcd-ehci: memory leak (bz #1382669) * Mon Oct 10 2016 Hans de Goede - 2:2.7.0-3 - Fix interrupt endpoints not working with network/spice USB redirection on guest with an emulated xhci controller (rhbz#1382331) * Tue Sep 20 2016 Michal Toman - 2:2.7.0-2 - Fix build on MIPS * Thu Sep 08 2016 Cole Robinson - 2:2.7.0-1 - Rebase to qemu 2.7.0 GA * Fri Aug 19 2016 Cole Robinson - 2:2.7.0-0.2.rc3 - Rebase to qemu 2.7.0-rc3 * Wed Aug 03 2016 Cole Robinson - 2:2.7.0-0.1.rc2 - Rebase to qemu 2.7.0-rc2 * Sat Jul 23 2016 Richard W.M. Jones - 2:2.6.0-6 - Rebuild to attempt to fix '2:qemu-system-xtensa-2.6.0-5.fc25.x86_64 requires libxenctrl.so.4.6()(64bit)' * Wed Jul 13 2016 Daniel Berrange - 2:2.6.0-5 - Introduce qemu-user-static sub-RPM * Wed Jun 22 2016 Cole Robinson - 2:2.6.0-4 - CVE-2016-4002: net: buffer overflow in MIPSnet (bz #1326083) - CVE-2016-4952 scsi: pvscsi: out-of-bounds access issue - CVE-2016-4964: scsi: mptsas infinite loop (bz #1339157) - CVE-2016-5106: scsi: megasas: out-of-bounds write (bz #1339581) - CVE-2016-5105: scsi: megasas: stack information leakage (bz #1339585) - CVE-2016-5107: scsi: megasas: out-of-bounds read (bz #1339573) - CVE-2016-4454: display: vmsvga: out-of-bounds read (bz #1340740) - CVE-2016-4453: display: vmsvga: infinite loop (bz #1340744) - CVE-2016-5126: block: iscsi: buffer overflow (bz #1340925) - CVE-2016-5238: scsi: esp: OOB write (bz #1341932) - CVE-2016-5338: scsi: esp: OOB r/w access (bz #1343325) - CVE-2016-5337: scsi: megasas: information leakage (bz #1343910) - Fix crash with -nodefaults -sdl (bz #1340931) - Add deps on edk2-ovmf and edk2-aarch64 * Thu May 26 2016 Cole Robinson - 2:2.6.0-3 - CVE-2016-4020: memory leak in kvmvapic.c (bz #1326904) - CVE-2016-4439: scsi: esb: OOB write #1 (bz #1337503) - CVE-2016-4441: scsi: esb: OOB write #2 (bz #1337506) - Fix regression installing windows 7 with qxl/vga (bz #1339267) - Fix crash with aarch64 gic-version=host and accel=tcg (bz #1339977) * Fri May 20 2016 Cole Robinson - 2:2.6.0-2 - Explicitly error if spice GL setup fails - Fix monitor resizing with virgl (bz #1337564) - Fix libvirt noise when introspecting qemu-kvm without hw virt * Fri May 13 2016 Cole Robinson - 2:2.6.0-1 - Rebase to v2.6.0 GA * Mon May 09 2016 Cole Robinson - 2:2.6.0-0.2.rc5 - Fix gtk UI crash when switching to monitor (bz #1333424) - Fix sdl2 UI lockup lockup when switching to monitor - Rebased to qemu-2.6.0-rc5 * Mon May 02 2016 Cole Robinson 2:2.6.0-0.2.rc4 - Rebased to version 2.6.0-rc4 - Fix test suite on big endian hosts (bz 1330174) * Mon Apr 25 2016 Cole Robinson - 2:2.6.0-0.2.rc3 - Rebuild to pick up spice GL support * Mon Apr 18 2016 Cole Robinson 2:2.6.0-0.1.rc3 - Rebased to version 2.6.0-rc3 - Fix s390 sysctl file install (bz 1327870) - Adjust spice gl version check to expect F24 backported version * Thu Apr 14 2016 Cole Robinson 2:2.6.0-0.1.rc2 - Rebased to version 2.6.0-rc2 - Fix GL deps (bz 1325966) - Ship sysctl file to fix s390x kvm (bz 1290589) - Fix FTBFS on s390 (bz 1326247) * Thu Apr 07 2016 Cole Robinson - 2:2.6.0-0.1.rc1 - Rebased to version 2.6.0-rc1 * Thu Mar 17 2016 Cole Robinson - 2:2.5.0-11 - CVE-2016-2857: net: out of bounds read (bz #1309564) - CVE-2016-2392: usb: null pointer dereference (bz #1307115) * Thu Mar 17 2016 Cole Robinson - 2:2.5.0-10 - CVE-2016-2538: Integer overflow in usb module (bz #1305815) - CVE-2016-2841: ne2000: infinite loop (bz #1304047) - CVE-2016-2857 net: out of bounds read (bz #1309564) - CVE-2016-2392 usb: null pointer dereference (bz #1307115) - Fix external snapshot any more after active committing (bz #1300209) * Wed Mar 9 2016 Peter Robinson 2:2.5.0-9 - Rebuild for tcmalloc ifunc issues on non x86 arches (see rhbz 1312462) * Tue Mar 1 2016 Paolo Bonzini 2:2.5.0-8 - Disable xfsctl, fallocate works fine in newer kernels (bz #1305512) * Tue Mar 1 2016 Peter Robinson 2:2.5.0-7 - All Fedora arches have libseccomp support (ARMv7, aarch64, Power64, s390(x)) * Mon Feb 15 2016 Cole Robinson - 2:2.5.0-6 - CVE-2015-8619: Fix sendkey out of bounds (bz #1292757) - CVE-2016-1981: infinite loop in e1000 (bz #1299995) - Fix Out-of-bounds read in usb-ehci (bz #1300234, bz #1299455) - CVE-2016-2197: ahci: null pointer dereference (bz #1302952) - Fix gdbstub for VSX registers for ppc64 (bz #1304377) - Fix qemu-img vmdk images to work with VMware (bz #1299185) * Thu Feb 04 2016 Fedora Release Engineering - 2:2.5.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Wed Jan 20 2016 Cole Robinson - 2:2.5.0-4 - CVE-2015-8567: net: vmxnet3: host memory leakage (bz #1289818) - CVE-2016-1922: i386: avoid null pointer dereference (bz #1292766) - CVE-2015-8613: buffer overflow in megasas_ctrl_get_info (bz #1284008) - CVE-2015-8701: Buffer overflow in tx_consume in rocker.c (bz #1293720) - CVE-2015-8743: ne2000: OOB memory access in ioport r/w functions (bz #1294787) - CVE-2016-1568: Use-after-free vulnerability in ahci (bz #1297023) - Fix modules.d/kvm.conf example syntax (bz #1298823) * Sat Jan 09 2016 Cole Robinson - 2:2.5.0-3 - Fix virtio 9p thread pool usage - CVE-2015-8558: DoS by infinite loop in ehci_advance_state (bz #1291309) - Re-add dist tag * Thu Jan 7 2016 Paolo Bonzini - 2:2.5.0-2 - add /etc/modprobe.d/kvm.conf - add 0001-virtio-9p-use-accessor-to-get-thread-pool.patch * Wed Dec 23 2015 Cole Robinson 2:2.5.0-1 - Rebased to version 2.5.0 * Tue Dec 08 2015 Cole Robinson 2:2.5.0-0.1.rc3 - Rebased to version 2.5.0-rc3 * Mon Nov 30 2015 Cole Robinson 2:2.5.0-0.1.rc2 - Rebased to version 2.5.0-rc2 * Fri Nov 20 2015 Cole Robinson 2:2.5.0-0.1.rc1 - Rebased to version 2.5.0-rc1 * Wed Nov 04 2015 Cole Robinson - 2:2.4.1-1 - Rebased to version 2.4.1 * Sun Oct 11 2015 Cole Robinson - 2:2.4.0.1-2 - Rebuild for xen 4.6 * Thu Oct 08 2015 Cole Robinson - 2:2.4.0.1-1 - Rebased to version 2.4.0.1 - CVE-2015-7295: virtio-net possible remote DoS (bz #1264393) - drive-mirror: Fix coroutine reentrance (bz #1266936) * Mon Sep 21 2015 Cole Robinson - 2:2.4.0-4 - CVE-2015-6815: net: e1000: infinite loop issue (bz #1260225) - CVE-2015-6855: ide: divide by zero issue (bz #1261793) - CVE-2015-5278: Infinite loop in ne2000_receive() (bz #1263284) - CVE-2015-5279: Heap overflow vulnerability in ne2000_receive() (bz #1263287) * Sun Sep 20 2015 Richard W.M. Jones - 2:2.4.0-3 - Fix emulation of various instructions, required by libm in F22 ppc64 guests. * Mon Aug 31 2015 Cole Robinson - 2:2.4.0-2 - CVE-2015-5255: heap memory corruption in vnc_refresh_server_surface (bz #1255899) * Tue Aug 11 2015 Cole Robinson - 2:2.4.0-1 - Rebased to version 2.4.0 - Support for virtio-gpu, 2D only - Support for virtio-based keyboard/mouse/tablet emulation - x86 support for memory hot-unplug - ACPI v5.1 table support for 'virt' board * Sun Aug 09 2015 Cole Robinson - 2:2.4.0-0.2.rc4 - CVE-2015-3209: pcnet: multi-tmd buffer overflow in the tx path (bz #1230536) - CVE-2015-3214: i8254: out-of-bounds memory access (bz #1243728) - CVE-2015-5158: scsi stack buffer overflow (bz #1246025) - CVE-2015-5154: ide: atapi: heap overflow during I/O buffer memory access (bz #1247141) - CVE-2015-5165: rtl8139 uninitialized heap memory information leakage to guest (bz #1249755) - CVE-2015-5166: BlockBackend object use after free issue (bz #1249758) - CVE-2015-5745: buffer overflow in virtio-serial (bz #1251160) * Tue Jul 14 2015 Cole Robinson 2:2.4.0-0.1-rc0 - Rebased to version 2.4.0-rc0 * Fri Jul 3 2015 Richard W.M. Jones - 2:2.3.0-15 - Bump and rebuild. * Fri Jul 3 2015 Daniel P. Berrange - 2:2.3.0-14 - Use explicit --(enable,disable)-spice args (rhbz #1239102) * Thu Jul 2 2015 Peter Robinson 2:2.3.0-13 - Build aarch64 with -fPIC (rhbz 1232499) * Wed Jul 01 2015 Nick Clifton - 2:2.3.0-12 - Disable stack protection for AArch64. F23's GCC thinks that it is available but F23's glibc does not support it. * Fri Jun 26 2015 Paolo Bonzini - 2:2.3.0-10 - Rebuild for libiscsi soname bump * Fri Jun 19 2015 Paolo Bonzini - 2:2.3.0-10 - Re-enable tcmalloc on arm * Thu Jun 18 2015 Fedora Release Engineering - 2:2.3.0-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Wed Jun 10 2015 Dan Horák - 2:2.3.0-8 - gperftools not available on s390(x) * Fri Jun 05 2015 Cole Robinson - 2:2.3.0-7 - CVE-2015-4037: insecure temporary file use in /net/slirp.c (bz #1222894) * Mon Jun 1 2015 Daniel P. Berrange - 2:2.3.0-6 - Disable tcmalloc on arm since it currently hangs (rhbz #1226806) - Re-enable tests on arm * Wed May 13 2015 Cole Robinson - 2:2.3.0-5 - Backport upstream 2.4 patch to link with tcmalloc, enable it - CVE-2015-3456: (VENOM) fdc: out-of-bounds fifo buffer memory access (bz #1221152) * Sun May 10 2015 Paolo Bonzini 2:2.3.0-4 - Backport upstream 2.4 patch to link with tcmalloc, enable it - Add -p1 to autopatch * Wed May 06 2015 Cole Robinson 2:2.3.0-3 - Fix ksm.service (bz 1218814) * Tue May 5 2015 Dan Horák - 2:2.3.0-2 - Require libseccomp only when built with it * Tue Mar 24 2015 Cole Robinson - 2:2.3.0-1 - Rebased to version 2.3.0 GA - Another attempt at fixing default /dev/kvm permissions (bz 950436) * Tue Mar 24 2015 Cole Robinson - 2:2.3.0-0.5.rc3 - Drop unneeded kvm.modules - Fix s390/ppc64 FTBFS (bz 1212328) * Tue Mar 24 2015 Cole Robinson - 2:2.3.0-0.4.rc3 - Rebased to version 2.3.0-rc3 * Tue Mar 24 2015 Cole Robinson - 2:2.3.0-0.3.rc2 - Rebased to version 2.3.0-rc2 - Don't install ksm services as executable (bz #1192720) - Skip hanging tests on s390 (bz #1206057) - CVE-2015-1779 vnc: insufficient resource limiting in VNC websockets decoder (bz #1205051, bz #1199572) * Tue Mar 24 2015 Cole Robinson - 2:2.3.0-0.2.rc1 - Rebased to version 2.3.0-rc1 * Sun Mar 22 2015 Cole Robinson - 2:2.3.0-0.1.rc0 - Rebased to version 2.3.0-rc0 * Tue Feb 17 2015 Richard W.M. Jones - 2:2.2.0-7 - Add -fPIC flag to build to avoid 'relocation R_X86_64_PC32 against undefined symbol' errors. - Add a hopefully temporary hack so that -fPIC is used to build NSS files in libcacard. * Wed Feb 4 2015 Richard W.M. Jones - 2:2.2.0-5 - Add UEFI support for aarch64. * Tue Feb 3 2015 Daniel P. Berrange - 2:2.2.0-4 - Re-enable SPICE after previous build fixes circular dep * Tue Feb 3 2015 Daniel P. Berrange - 2:2.2.0-3 - Rebuild for changed xen soname - Temporarily disable SPICE to break circular build-dep on libcacard - Stop libcacard linking against the entire world * Wed Jan 28 2015 Daniel P. Berrange - 2:2.2.0-2 - Pass package information to configure