From 12d4393d0830a2a63828d302f177a9b8e31f433a Mon Sep 17 00:00:00 2001 From: Brendan Fennell Date: Wed, 26 Sep 2012 16:46:28 +0100 Subject: [PATCH] pl190: fix read of VECTADDR Reading VECTADDR was causing us to set the current priority to the wrong value, the most obvious effect of which was that we would return the vector for the wrong interrupt as the result of the read. Signed-off-by: Brendan Fennell Signed-off-by: Peter Maydell (cherry picked from commit 14c126baf1c38607c5bd988878de85a06cefd8cf) Signed-off-by: Michael Roth --- hw/pl190.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/hw/pl190.c b/hw/pl190.c index cb50afb..7332f4d 100644 --- a/hw/pl190.c +++ b/hw/pl190.c @@ -117,12 +117,18 @@ static uint64_t pl190_read(void *opaque, target_phys_addr_t offset, return s->protected; case 12: /* VECTADDR */ /* Read vector address at the start of an ISR. Increases the - current priority level to that of the current interrupt. */ - for (i = 0; i < s->priority; i++) - { - if ((s->level | s->soft_level) & s->prio_mask[i]) - break; - } + * current priority level to that of the current interrupt. + * + * Since an enabled interrupt X at priority P causes prio_mask[Y] + * to have bit X set for all Y > P, this loop will stop with + * i == the priority of the highest priority set interrupt. + */ + for (i = 0; i < s->priority; i++) { + if ((s->level | s->soft_level) & s->prio_mask[i + 1]) { + break; + } + } + /* Reading this value with no pending interrupts is undefined. We return the default address. */ if (i == PL190_NUM_PRIO) -- 1.7.12.1