--- Python-2.7.4/Modules/Setup.dist.rhconfig	2013-04-06 16:02:34.000000000 +0200

+++ Python-2.7.4/Modules/Setup.dist	2013-04-08 10:05:16.369985654 +0200

@@ -153,7 +153,7 @@ GLHACK=-Dclear=__GLclear

 # modules are to be built as shared libraries (see above for more

 # detail; also note that *static* reverses this effect):

-#*shared*

+*shared*

 # GNU readline.  Unlike previous Python incarnations, GNU readline is

 # now incorporated in an optional module, configured in the Setup file

@@ -163,77 +163,77 @@ GLHACK=-Dclear=__GLclear

 # it, depending on your system -- see the GNU readline instructions.

 # It's okay for this to be a shared library, too.

-#readline readline.c -lreadline -ltermcap

+readline readline.c -lreadline -ltermcap

 # Modules that should always be present (non UNIX dependent):

-#array arraymodule.c	# array objects

-#cmath cmathmodule.c _math.c # -lm # complex math library functions

-#math mathmodule.c _math.c # -lm # math library functions, e.g. sin()

-#_struct _struct.c	# binary structure packing/unpacking

-#time timemodule.c # -lm # time operations and variables

-#operator operator.c	# operator.add() and similar goodies

-#_testcapi _testcapimodule.c    # Python C API test module

-#_random _randommodule.c	# Random number generator

-#_collections _collectionsmodule.c # Container types

+array arraymodule.c	# array objects

+cmath cmathmodule.c _math.c # -lm # complex math library functions

+math mathmodule.c _math.c # -lm # math library functions, e.g. sin()

+_struct _struct.c	# binary structure packing/unpacking

+time timemodule.c # -lm # time operations and variables

+operator operator.c	# operator.add() and similar goodies

+_testcapi _testcapimodule.c    # Python C API test module

+_random _randommodule.c	# Random number generator

+_collections _collectionsmodule.c # Container types

 #_heapq _heapqmodule.c		# Heapq type

-#itertools itertoolsmodule.c	# Functions creating iterators for efficient looping 

-#strop stropmodule.c		# String manipulations

-#_functools _functoolsmodule.c	# Tools for working with functions and callable objects

+itertools itertoolsmodule.c	# Functions creating iterators for efficient looping 

+strop stropmodule.c		# String manipulations

+_functools _functoolsmodule.c	# Tools for working with functions and callable objects

 #_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c	# elementtree accelerator

 #_pickle _pickle.c	# pickle accelerator

 #datetime datetimemodule.c	# date/time type

-#_bisect _bisectmodule.c	# Bisection algorithms

+_bisect _bisectmodule.c	# Bisection algorithms

-#unicodedata unicodedata.c    # static Unicode character database

+unicodedata unicodedata.c    # static Unicode character database

 # access to ISO C locale support

-#_locale _localemodule.c  # -lintl

+_locale _localemodule.c  # -lintl

 # Standard I/O baseline

 #_io -I$(srcdir)/Modules/_io _io/bufferedio.c _io/bytesio.c _io/fileio.c _io/iobase.c _io/_iomodule.c _io/stringio.c _io/textio.c

 # Modules with some UNIX dependencies -- on by default:

 # (If you have a really backward UNIX, select and socket may not be

 # supported...)

-#fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)

-#spwd spwdmodule.c		# spwd(3) 

-#grp grpmodule.c		# grp(3)

-#select selectmodule.c	# select(2); not on ancient System V

+fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)

+spwd spwdmodule.c		# spwd(3) 

+grp grpmodule.c		# grp(3)

+select selectmodule.c	# select(2); not on ancient System V

 # Memory-mapped files (also works on Win32).

-#mmap mmapmodule.c

+mmap mmapmodule.c

 # CSV file helper

-#_csv _csv.c

+_csv _csv.c

 # Socket module helper for socket(2)

-#_socket socketmodule.c timemodule.c

+_socket socketmodule.c timemodule.c

 # Socket module helper for SSL support; you must comment out the other

 # socket line above, and possibly edit the SSL variable:

 #SSL=/usr/local/ssl

-#_ssl _ssl.c \

-#	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \

-#	-L$(SSL)/lib -lssl -lcrypto

+_ssl _ssl.c \

+	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \

+	-L$(SSL)/lib -lssl -lcrypto

 # The crypt module is now disabled by default because it breaks builds

 # on many systems (where -lcrypt is needed), e.g. Linux (I believe).

 #

 # First, look at Setup.config; configure may have set this for you.

-#crypt cryptmodule.c # -lcrypt	# crypt(3); needs -lcrypt on some systems

+crypt cryptmodule.c # -lcrypt	# crypt(3); needs -lcrypt on some systems

 # Some more UNIX dependent modules -- off by default, since these

 # are not supported by all UNIX systems:

-#nis nismodule.c -lnsl	# Sun yellow pages -- not everywhere

-#termios termios.c	# Steen Lumholt's termios module

-#resource resource.c	# Jeremy Hylton's rlimit interface

+nis nismodule.c -lnsl -ltirpc -I/usr/include/tirpc -I/usr/include/nsl -L/usr/lib/nsl

+termios termios.c	# Steen Lumholt's termios module

+resource resource.c	# Jeremy Hylton's rlimit interface

 # Multimedia modules -- off by default.

@@ -238,8 +238,8 @@ GLHACK=-Dclear=__GLclear

 # #993173 says audioop works on 64-bit platforms, though.

 # These represent audio samples or images as strings:

-#audioop audioop.c	# Operations on audio samples

-#imageop imageop.c	# Operations on images

+audioop audioop.c	# Operations on audio samples

+imageop imageop.c	# Operations on images

 # Note that the _md5 and _sha modules are normally only built if the

@@ -249,14 +249,14 @@ GLHACK=-Dclear=__GLclear

 # Message-Digest Algorithm, described in RFC 1321.  The necessary files

 # md5.c and md5.h are included here.

-#_md5 md5module.c md5.c

+_md5 md5module.c md5.c

 # The _sha module implements the SHA checksum algorithms.

 # (NIST's Secure Hash Algorithms.)

-#_sha shamodule.c

-#_sha256 sha256module.c

-#_sha512 sha512module.c

+_sha shamodule.c

+_sha256 sha256module.c

+_sha512 sha512module.c

 # SGI IRIX specific modules -- off by default.

@@ -303,12 +303,12 @@ GLHACK=-Dclear=__GLclear

 # A Linux specific module -- off by default; this may also work on 

 # some *BSDs.

-#linuxaudiodev linuxaudiodev.c

+linuxaudiodev linuxaudiodev.c

 # George Neville-Neil's timing module:

-#timing timingmodule.c

+timing timingmodule.c

 # The _tkinter module.

@@ -323,7 +323,7 @@ GLHACK=-Dclear=__GLclear

 # every system.

 # *** Always uncomment this (leave the leading underscore in!):

-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \

+_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \

 # *** Uncomment and edit to reflect where your Tcl/Tk libraries are:

 #	-L/usr/local/lib \

 # *** Uncomment and edit to reflect where your Tcl/Tk headers are:

@@ -333,7 +333,7 @@ GLHACK=-Dclear=__GLclear

 # *** Or uncomment this for Solaris:

 #	-I/usr/openwin/include \

 # *** Uncomment and edit for Tix extension only:

-#	-DWITH_TIX -ltix8.1.8.2 \

+	-DWITH_TIX -ltix \

 # *** Uncomment and edit for BLT extension only:

 #	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \

 # *** Uncomment and edit for PIL (TkImaging) extension only:

@@ -342,7 +342,7 @@ GLHACK=-Dclear=__GLclear

 # *** Uncomment and edit for TOGL extension only:

 #	-DWITH_TOGL togl.c \

 # *** Uncomment and edit to reflect your Tcl/Tk versions:

-#	-ltk8.2 -ltcl8.2 \

+	-ltk -ltcl \

 # *** Uncomment and edit to reflect where your X11 libraries are:

 #	-L/usr/X11R6/lib \

 # *** Or uncomment this for Solaris:

@@ -352,7 +352,7 @@ GLHACK=-Dclear=__GLclear

 # *** Uncomment for AIX:

 #	-lld \

 # *** Always uncomment this; X11 libraries to link with:

-#	-lX11

+	-lX11

 # Lance Ellinghaus's syslog module

 #syslog syslogmodule.c		# syslog daemon interface

@@ -374,7 +374,7 @@ GLHACK=-Dclear=__GLclear

 # it is a highly experimental and dangerous device for calling

 # *arbitrary* C functions in *arbitrary* shared libraries:

-#dl dlmodule.c

+dl dlmodule.c

 # Modules that provide persistent dictionary-like semantics.  You will

@@ -397,7 +397,7 @@ GLHACK=-Dclear=__GLclear

 #

 # First, look at Setup.config; configure may have set this for you.

-#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm

+gdbm gdbmmodule.c -lgdbm

 # Sleepycat Berkeley DB interface.

@@ -412,11 +412,9 @@ GLHACK=-Dclear=__GLclear

 #

 # Edit the variables DB and DBLIBVERto point to the db top directory

 # and the subdirectory of PORT where you built it.

-#DB=/usr/local/BerkeleyDB.4.0

-#DBLIBVER=4.0

-#DBINC=$(DB)/include

-#DBLIB=$(DB)/lib

-#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)

+DBINC=/usr/include/libdb

+DBLIB=/usr/lib

+_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb

 # Historical Berkeley DB 1.85

 #

@@ -431,14 +430,14 @@ GLHACK=-Dclear=__GLclear

 # Helper module for various ascii-encoders

-#binascii binascii.c

+binascii binascii.c

 # Fred Drake's interface to the Python parser

-#parser parsermodule.c

+parser parsermodule.c

 # cStringIO and cPickle

-#cStringIO cStringIO.c

-#cPickle cPickle.c

+cStringIO cStringIO.c

+cPickle cPickle.c

 # Lee Busby's SIGFPE modules.

@@ -461,7 +460,7 @@ GLHACK=-Dclear=__GLclear

 # Andrew Kuchling's zlib module.

 # This require zlib 1.1.3 (or later).

 # See http://www.gzip.org/zlib/

-#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz

+zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz

 # Interface to the Expat XML parser

 #

@@ -480,14 +479,14 @@ GLHACK=-Dclear=__GLclear

 # Hye-Shik Chang's CJKCodecs

 # multibytecodec is required for all the other CJK codec modules

-#_multibytecodec cjkcodecs/multibytecodec.c

+_multibytecodec cjkcodecs/multibytecodec.c

-#_codecs_cn cjkcodecs/_codecs_cn.c

-#_codecs_hk cjkcodecs/_codecs_hk.c

-#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c

-#_codecs_jp cjkcodecs/_codecs_jp.c

-#_codecs_kr cjkcodecs/_codecs_kr.c

-#_codecs_tw cjkcodecs/_codecs_tw.c

+_codecs_cn cjkcodecs/_codecs_cn.c

+_codecs_hk cjkcodecs/_codecs_hk.c

+_codecs_iso2022 cjkcodecs/_codecs_iso2022.c

+_codecs_jp cjkcodecs/_codecs_jp.c

+_codecs_kr cjkcodecs/_codecs_kr.c

+_codecs_tw cjkcodecs/_codecs_tw.c

 # Example -- included for reference only:

 # xx xxmodule.c