From 68b3c6652e48eb93570d3d65c76e24d58c2507e7 Mon Sep 17 00:00:00 2001 From: CentOS Sources Date: May 17 2022 10:09:07 +0000 Subject: import pnm2ppa-1.04-52.el9 --- diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..adde4da --- /dev/null +++ b/.gitignore @@ -0,0 +1,2 @@ +SOURCES/pnm2ppa-1.04.tar.gz +SOURCES/ppa-0.8.6.tar.gz diff --git a/.pnm2ppa.metadata b/.pnm2ppa.metadata new file mode 100644 index 0000000..999a4f9 --- /dev/null +++ b/.pnm2ppa.metadata @@ -0,0 +1,2 @@ +a3cd26788779bc80fa6c8265f3b2aacaaa5acd92 SOURCES/pnm2ppa-1.04.tar.gz +97eedbb777940cd7fa9b2efa181c70f7146325af SOURCES/ppa-0.8.6.tar.gz diff --git a/SOURCES/pbm2ppa-20000205.diff b/SOURCES/pbm2ppa-20000205.diff new file mode 100644 index 0000000..96fbae5 --- /dev/null +++ b/SOURCES/pbm2ppa-20000205.diff @@ -0,0 +1,894 @@ +diff -up pbm2ppa-0.8.6/CALIBRATION.20000205 pbm2ppa-0.8.6/CALIBRATION +--- pbm2ppa-0.8.6/CALIBRATION.20000205 1998-08-22 14:44:07.000000000 +0100 ++++ pbm2ppa-0.8.6/CALIBRATION 2008-09-24 15:15:53.000000000 +0100 +@@ -10,9 +10,22 @@ during this procedure (like 600)] + The 'pbmtpg' program generates a full-page (8.5"x11") test pattern in + pbmraw (P4) format on stdout. The output may be fed directly into pbm2ppa + in order to print a calibration pattern on your printer with commands such as: ++Assuming you printer is on /dev/lp0 + +- pbmtpg | pbm2ppa > /dev/lp1 ++ pbmtpg | pbm2ppa > /dev/lp0 + ( as root ) ++(Note: /dev/lp0 is the default device for the primary parallel port on systems ++with 2.2.x or later Linux kernels; it is /dev/lp1 on systems with ++older Linux 2.0.x kernels) ++ ++For other papersizes, the command must specify a valid size, for both ++pbmtpg and pbm2ppa: ++ ++ pbmtpg -a4 | pbm2ppa -s a4 > /dev/lp0 ++ pbmtpg -legal | pbm2ppa -s legal > /dev/lp0 ++ pbmtpg -letter | pbm2ppa -s letter > /dev/lp0 ++ ++For A4, US Legal of US Letter (default). + + - or - + +@@ -33,3 +46,7 @@ paper. Also, the margins should be able + causing the printer to choke with 'blinking lights syndrome'. + + [TODO: Add shearing adjustments to pbm2ppa and explain here] ++ ++ ++ ++ +diff -up pbm2ppa-0.8.6/defaults.1000.h.20000205 pbm2ppa-0.8.6/defaults.1000.h +--- pbm2ppa-0.8.6/defaults.1000.h.20000205 1998-08-22 14:44:12.000000000 +0100 ++++ pbm2ppa-0.8.6/defaults.1000.h 2008-09-24 15:17:47.000000000 +0100 +@@ -1,19 +0,0 @@ +-/* defaults.h +- * Default printer values. Edit these and recompile if so desired. +- * [Note: a /etc/pbm2ppa.conf file will override these] +- */ +-#ifndef _DEFAULTS_H +-#define _DEFAULTS_H +- +-#define DEFAULT_PRINTER ( HP1000 ) +- +-/* Refer to CALIBRATION file about these settings */ +-#define DEFAULT_X_OFFSET ( 100 ) +-#define DEFAULT_Y_OFFSET ( -650 ) +- +-#define DEFAULT_TOP_MARGIN ( 150 ) +-#define DEFAULT_LEFT_MARGIN ( 150 ) +-#define DEFAULT_RIGHT_MARGIN ( 150 ) +-#define DEFAULT_BOTTOM_MARGIN ( 150 ) +- +-#endif +diff -up pbm2ppa-0.8.6/defaults.720.h.20000205 pbm2ppa-0.8.6/defaults.720.h +--- pbm2ppa-0.8.6/defaults.720.h.20000205 1998-08-22 14:44:12.000000000 +0100 ++++ pbm2ppa-0.8.6/defaults.720.h 2008-09-24 15:17:47.000000000 +0100 +@@ -1,19 +0,0 @@ +-/* defaults.h +- * Default printer values. Edit these and recompile if so desired. +- * [Note: a /etc/pbm2ppa.conf file will override these] +- */ +-#ifndef _DEFAULTS_H +-#define _DEFAULTS_H +- +-#define DEFAULT_PRINTER ( HP720 ) +- +-/* Refer to CALIBRATION file about these settings */ +-#define DEFAULT_X_OFFSET ( 169 ) +-#define DEFAULT_Y_OFFSET ( -569 ) +- +-#define DEFAULT_TOP_MARGIN ( 150 ) +-#define DEFAULT_LEFT_MARGIN ( 150 ) +-#define DEFAULT_RIGHT_MARGIN ( 150 ) +-#define DEFAULT_BOTTOM_MARGIN ( 150 ) +- +-#endif +diff -up pbm2ppa-0.8.6/defaults.820.h.20000205 pbm2ppa-0.8.6/defaults.820.h +--- pbm2ppa-0.8.6/defaults.820.h.20000205 1998-08-22 14:44:12.000000000 +0100 ++++ pbm2ppa-0.8.6/defaults.820.h 2008-09-24 15:17:47.000000000 +0100 +@@ -1,19 +0,0 @@ +-/* defaults.h +- * Default printer values. Edit these and recompile if so desired. +- * [Note: a /etc/pbm2ppa.conf file will override these] +- */ +-#ifndef _DEFAULTS_H +-#define _DEFAULTS_H +- +-#define DEFAULT_PRINTER ( HP820 ) +- +-/* Refer to CALIBRATION file about these settings */ +-#define DEFAULT_X_OFFSET ( 75 ) +-#define DEFAULT_Y_OFFSET ( -500 ) +- +-#define DEFAULT_TOP_MARGIN ( 80 ) +-#define DEFAULT_LEFT_MARGIN ( 80 ) +-#define DEFAULT_RIGHT_MARGIN ( 80 ) +-#define DEFAULT_BOTTOM_MARGIN ( 150 ) +- +-#endif +diff -up /dev/null pbm2ppa-0.8.6/defaults.h +--- /dev/null 2008-09-24 08:53:03.196006296 +0100 ++++ pbm2ppa-0.8.6/defaults.h 2008-09-24 15:15:53.000000000 +0100 +@@ -0,0 +1,53 @@ ++/* defaults.h ++ * Default printer values. Edit these and recompile if so desired. ++ * [Note: a /etc/pbm2ppa.conf file will override these] ++ */ ++ ++#ifndef _DEFAULTS_H ++#define _DEFAULTS_H ++ ++#ifndef DEFAULT_PRINTER ++#define DEFAULT_PRINTER ( HP720 ) ++#endif ++ ++/* for HP720 series */ ++/* Refer to CALIBRATION file about these settings */ ++#define HP720_X_OFFSET ( 169 ) ++#define HP720_Y_OFFSET ( -569 ) ++ ++#define HP720_TOP_MARGIN ( 150 ) ++#define HP720_LEFT_MARGIN ( 150 ) ++#define HP720_RIGHT_MARGIN ( 150 ) ++#define HP720_BOTTOM_MARGIN ( 150 ) ++ ++/* for HP820 series */ ++/* Refer to CALIBRATION file about these settings */ ++#define HP820_X_OFFSET ( 75 ) ++#define HP820_Y_OFFSET ( -500 ) ++ ++#define HP820_TOP_MARGIN ( 80 ) ++#define HP820_LEFT_MARGIN ( 80 ) ++#define HP820_RIGHT_MARGIN ( 80 ) ++#define HP820_BOTTOM_MARGIN ( 150 ) ++ ++/* for HP1000 series */ ++/* Refer to CALIBRATION file about these settings */ ++#define HP1000_X_OFFSET ( 100 ) ++#define HP1000_Y_OFFSET ( -650 ) ++ ++#define HP1000_TOP_MARGIN ( 150 ) ++#define HP1000_LEFT_MARGIN ( 150 ) ++#define HP1000_RIGHT_MARGIN ( 150 ) ++#define HP1000_BOTTOM_MARGIN ( 150 ) ++ ++#endif ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ +diff -up pbm2ppa-0.8.6/INSTALL.20000205 pbm2ppa-0.8.6/INSTALL +--- pbm2ppa-0.8.6/INSTALL.20000205 1998-10-19 02:27:16.000000000 +0100 ++++ pbm2ppa-0.8.6/INSTALL 2008-09-24 15:15:53.000000000 +0100 +@@ -1,6 +1,6 @@ + Overview + -------- +-This file contains some quick notes on installation in general. For a ++ This file contains some quick notes on installation in general. For a + complete step-by-step instruction on how to install pbm2ppa for your + printer, please see INSTALL-MORE. (It was written for the 820, but it + should work for all supported models) Thanks to Michael Buehlmann for +@@ -9,14 +9,19 @@ writing that guide! + Compilation + ----------- + To compile, you should simply run 'make' with the series of your +-printer. The following options are supported: ++printer. This will set the default printer to the HP720 series. ++To specify a different default printyer, the following options are supported: + + make 720 # for 720 series - e.g. 722C + make 820 # for 820 series - e.g. 820Cse + make 1000 # for 1000 series + +-If you choose to recompile for a different printer series, you must 'make +-clean' first. ++ If you choose to recompile for a different default printer series, ++you must 'make clean' first. However, the default printer choice ++selected at compilation time can be overridden with e.g., the ++"pbm2pppa -v 820 ..." command line option, or specified by e.g., ++a "version 820" entry in the /etc/pbm2ppa.conf file. ++Type "pbm2ppa -h" to see the list of options. + + Installation + ------------ +@@ -26,17 +31,23 @@ but you might want to tweak them). See + + The other binary created, pbm2ppa, is a converter from a PBM + image to a stream of PPA data that can be sent directly to the printer. +-The PBM image is expected to be 600 dpi, 8.5"x11". These files can be ++The PBM image is expected to be 600 dpi, and the paper size ++can be 8.5"x11" (US Letter), 8.5"x14" (US Legal) or A4. These files can be + generated with ghostscript. Both the pbm and pbmraw devices are supported. + pbmraw is MUCH faster, so use it if you have it available! ++IMPORTANT: the PAPERSIZE option passed to ghostscript must match ++the paper size specified for pbm2ppa. ++Valid papersizes are: "letter" = "us" , "legal" , and "a4" . + + Use + --- +- To print a postscript file with this program, I use a simple +-shell script: ++ To print a postscript file with this program, on US Letter ++paper and a HP 710/720 series printer, I use a simple shell script: + +-cat $1 | gs -sDEVICE=pbm -q -dNOPAUSE -r600 -sOutputFile=- - | \ +-pbm2ppa - - | lpr ++cat $1 | gs -sDEVICE=pbm -q -dNOPAUSE -r600 -sPAPERSIZE=letter -sOutputFile=- - | \ ++pbm2ppa -s letter -v 720 - - | lpr -l ++ ++Valid printer versions are "720", "820" and "1000". + + You can also set up a printer filter. See the documentation for + your print spooler for information on how to do that, or look in +diff -up pbm2ppa-0.8.6/INSTALL-MORE.20000205 pbm2ppa-0.8.6/INSTALL-MORE +--- pbm2ppa-0.8.6/INSTALL-MORE.20000205 1998-10-19 02:27:17.000000000 +0100 ++++ pbm2ppa-0.8.6/INSTALL-MORE 2008-09-24 15:15:53.000000000 +0100 +@@ -36,14 +36,21 @@ or put in your printer number (720, 820 + file). + + +-2. To adjust the paper size to DIN A4, use the -s a4 option to pbm2ppa or ++2. To adjust the paper size to US Legal (8.5"x14"), use the -s legal option ++to pbm2ppa or change your pbm2ppa.conf file to read "papersize legal" ++To adjust the paper size to DIN A4, use the -s a4 option to pbm2ppa or + change your pbm2ppa.conf file to read "papersize a4" (see step 5). +- ++For US Letter (8.5"x11") paper is the default; "-s us", "-s letter", ++"papersize us" and "papersize letter" also specif this size. + + 3. You can now calibrate the printer with + +-For US size paper: ++For US Letter size paper: + # pbmtpg | pbm2ppa > /dev/lp1 ( as root ) ++or ++# pbmtpg -letter | pbm2ppa > /dev/lp1 ( as root ) ++For US Legal size paper: ++# pbmtpg -legal | pbm2ppa -s a4 > /dev/lp1 ( as root ) + For A4 size paper: + # pbmtpg -a4 | pbm2ppa -s a4 > /dev/lp1 ( as root ) + +diff -up pbm2ppa-0.8.6/Makefile.20000205 pbm2ppa-0.8.6/Makefile +--- pbm2ppa-0.8.6/Makefile.20000205 1998-10-11 16:17:16.000000000 +0100 ++++ pbm2ppa-0.8.6/Makefile 2008-09-24 15:15:53.000000000 +0100 +@@ -1,36 +1,23 @@ + CC=gcc +-CFLAGS=-Wall -O2 ++CFLAGS=-Wall -O2 + LDFLAGS= ++PRINTER=HP720 + +-default: +- @echo Please specify the type of printer you wish to compile this +- @echo software for. Supported options are: +- @echo +- @echo make 720 +- @echo make 820 +- @echo make 1000 +- @echo +- @exit ++default: all + +-720.h: +- cp defaults.720.h defaults.h ++720: PRINTER=HP720 ++720: all + +-820.h: +- cp defaults.820.h defaults.h ++820: PRINTER=HP820 ++820: all + +-1000.h: +- cp defaults.1000.h defaults.h ++1000: PRINTER=HP1000 ++1000: all + +-720: 720.h all +- +-820: 820.h all +- +-1000: 1000.h all +- +-all: defaults.h pbm2ppa pbmtpg ++all: pbm2ppa pbmtpg + + clean: +- rm -f *.o *~ pbmtpg pbm2ppa defaults.h ++ rm -f *.o *~ pbmtpg pbm2ppa + + pbm2ppa: pbm2ppa.o ppa.o pbm.o cutswath.o + $(CC) $(LDFLAGS) -o pbm2ppa pbm2ppa.o ppa.o pbm.o cutswath.o +@@ -39,4 +26,11 @@ pbmtpg: pbmtpg.o + $(CC) $(CFLAGS) -o pbmtpg pbmtpg.o -lm + + .c.o: $*.c ppa.h pbm.h +- $(CC) $(CFLAGS) -c $*.c ++ $(CC) $(CFLAGS) -DDEFAULT_PRINTER=$(PRINTER) -c $*.c ++ ++ ++ ++ ++ ++ ++ +diff -up /dev/null pbm2ppa-0.8.6/pbm2ppa.1 +--- /dev/null 2008-09-24 08:53:03.196006296 +0100 ++++ pbm2ppa-0.8.6/pbm2ppa.1 2008-09-24 15:15:53.000000000 +0100 +@@ -0,0 +1,135 @@ ++.TH pnm2ppa "5 Feb 2000" ++.SH NAME ++pbm2ppa - convert portable bitmap (PBM) to HP's Printing Performance Architecture (PPA) file format ++.SH SYNOPSIS ++pbm2ppa [options] [ <\fIinfile\fR] > [ <\fIoutfile\fR]> ] ] ++ ++.SH DESCRIPTION ++Reads portable bitmap (PBM) format as input. Outputs a stream suitable for ++processing by Hewlett-Packard's range of Printing Performance Architecture ++(PPA) printers. ++pnm2ppa supports the HP 710c, 712c, 720c, 722c, 820c, and 1000c ++series printers. ++.PP ++(Portable bitmap (PBM) format output can be produced from PostScript(tm) input ++by the GhostScript driver "pbmraw".) ++.PP ++ ++ ++.SH OPTIONS ++.\"{{{ infile ++.IP "\fB\\fIinfile\fR \fP" ++Input file \fIinfile\fR is either a path to a file or device, or '-' to indicate stdin (defaults to stdin) ++.\"}}} ++ ++ ++.\"{{{ outfile ++.IP "\fB\\fIoutfile\fR \fP" ++Output file \fIoutfile\fR is either a path to a file or device, or '-' to indicate stdout (defaults to stdout) ++.\"}}} ++ ++ ++.\"{{{ -b bottommargin ++.IP "\fB\-b \fIbottommargin\fR\fP" ++Sets the bottom margin \fIbottommargin\fR in units of 1/600 inches (e.g., -b 150 = 0.25") ++.\"}}} ++ ++ ++.\"{{{ -d ++.IP "\fB\-d\fP" ++Displays the current configuration ++.\"}}} ++ ++ ++.\"{{{ -f configfile ++.IP "\fB\-f \fIconfigfile\fR\fP" ++Overrides reading the configuration from /etc/pnm2ppa.conf, and uses ++\fIconfigfile\fR instead. ++.\"}}} ++ ++ ++.\"{{{ -h ++.IP "\fB\-h\fP" ++Displays program usage ++.\"}}} ++ ++ ++ ++.\"{{{ -l leftmargin ++.IP "\fB\-l \fIleftmargin\fR\fP" ++Sets the left margin \fIleftmargin\fR in units of 1/600 inches (e.g., -l 150 = 0.25") ++.\"}}} ++ ++ ++.\"{{{ -r rightmargin ++.IP "\fB\-r \fIrightmargin\fR\fP" ++Sets the right margin \fIrightmargin\fR in units of 1/600 inches (e.g., -r 150 = 0.25") ++.\"}}} ++ ++.\"{{{ -s papersize ++.IP "\fB\-s \fIpapersize\fR\fP" ++Sets the paper size. Possible values for \fIpapersize\fR are \fBa4\fP (A4), ++\fBletter\fP or \fBus\fP (US Letter, 8.5"x11"), and \fBlegal\fR (US Legal, ++8.5"x14"). ++The default is US Letter. ++.\"}}} ++ ++.\"{{{ -t topmargin ++.IP "\fB\-t \fItopmargin\fR\fP" ++Sets the top margin \fItopmargin\fR in units of 1/600 inches (ie -t 150 = 0.25") ++.\"}}} ++ ++.\"{{{ -v printertype ++.IP "\fB\-v \fIprintertype\fP" ++Selects the printer model. Possible values of \fIprintertype\fR are: ++\fB710\fP, \fB712\fP, \fB720\fP, \fB722\fP, \fB820\fP and \fB1000\fP. ++The default is the HP DeskJet 7X0 Series (710, 712, 720, 722). ++.\"}}} ++ ++ ++.\"{{{ -x xoffset ++.IP "\fB\-x \fIxoffset\fR\fP" ++Sets the x-offset \fBxoffset\fR from the left of the page. Units are 1/600 inches ++.\"}}} ++ ++.\"{{{ -y yoffset ++.IP "\fB\-y \fIyoffset\fR\fP" ++Sets the y-offset \fByoffset\fR from the top of the page. Units are 1/600 inches ++.\"}}} ++ ++ ++.SH NOTES ++The configuration file is read in first. Command line arguments then modify the resulting definitions. ++.PP ++The -x and -y options accumulate. The -v option resets all definitions back to ++an inbuilt default for that printer and should be used before subsequent -b -l -r, -t, -x, and -y arguments. ++.SH "SEE ALSO" ++pbm(5) ++ ++.SH FILES ++ ++.\"{{{ /etc/pbm2ppa.conf ++.IP "\fB\fI/etc/pbm2ppa.conf\fR\fP" ++Default configuration file ++.\"}}} ++ ++ ++.SH AUTHOR ++This code is licensed under the GNU Public License version 2. See ++LICENSE for details. ++.PP ++(c) 1998 Tim Norman ++.PP ++.SH HISTORY ++This program was written by Tim Norman. It originally ++supported black and white output on the 820 series. This program is ++almost obsolete; its successor pnm2ppa will support color printing. ++.SH BUGS ++This is a stable driver, but does not support color printing. ++ ++ ++ ++ ++ ++ ++ +diff -up pbm2ppa-0.8.6/pbm2ppa.c.20000205 pbm2ppa-0.8.6/pbm2ppa.c +--- pbm2ppa-0.8.6/pbm2ppa.c.20000205 1998-09-16 01:00:27.000000000 +0100 ++++ pbm2ppa-0.8.6/pbm2ppa.c 2008-09-24 15:15:53.000000000 +0100 +@@ -17,10 +17,15 @@ + + /* Paper sizes in 600ths of an inch. */ + +-/* US is 8.5 in by 11 in */ ++/* US Letter is 8.5 in by 11 in */ + +-#define USWIDTH (5100) +-#define USHEIGHT (6600) ++#define LETTERWIDTH (5100) ++#define LETTERHEIGHT (6600) ++ ++/* US Legal is 8.5 in by 14 in */ ++ ++#define LEGALWIDTH (5100) ++#define LEGALHEIGHT (8400) + + /* A4 is 210 mm by 297 mm == 8.27 in by 11.69 in */ + +@@ -121,16 +126,35 @@ int print_pbm (FILE *in) + + void set_printer_specific_defaults() + { +- printer.x_offset=DEFAULT_X_OFFSET; +- printer.y_offset=DEFAULT_Y_OFFSET; + switch(printer.version) + { + case HP720: ++ printer.x_offset=HP720_X_OFFSET; ++ printer.y_offset=HP720_Y_OFFSET; ++ printer.top_margin=HP720_TOP_MARGIN; ++ printer.left_margin=HP720_LEFT_MARGIN; ++ printer.right_margin=HP720_RIGHT_MARGIN; ++ printer.bottom_margin=HP720_BOTTOM_MARGIN; + printer.marg_diff=2; + printer.bufsize = 200*1024; + break; + case HP820: ++ printer.x_offset=HP820_X_OFFSET; ++ printer.y_offset=HP820_Y_OFFSET; ++ printer.top_margin=HP820_TOP_MARGIN; ++ printer.left_margin=HP820_LEFT_MARGIN; ++ printer.right_margin=HP820_RIGHT_MARGIN; ++ printer.bottom_margin=HP820_BOTTOM_MARGIN; ++ printer.marg_diff=0x62; ++ printer.bufsize = 100*1024; ++ break; + case HP1000: ++ printer.x_offset=HP1000_X_OFFSET; ++ printer.y_offset=HP1000_Y_OFFSET; ++ printer.top_margin=HP1000_TOP_MARGIN; ++ printer.left_margin=HP1000_LEFT_MARGIN; ++ printer.right_margin=HP1000_RIGHT_MARGIN; ++ printer.bottom_margin=HP1000_BOTTOM_MARGIN; + printer.marg_diff=0x62; + printer.bufsize = 100*1024; + break; +@@ -144,15 +168,17 @@ void show_usage(char* prog) + { + printf("usage: %s [ options ] [ [ ] ]\n\n",prog); + printf(" Prints a pbm- or pbmraw-format to HP720/820/1000-format .\n\n"); +- printf(" -v printer version (720, 820, or 1000)\n"); +- printf(" -x vertical offset adjustment in 1\"/600\n"); +- printf(" -y horizontal offset adjustment in 1\"/600\n"); +- printf(" -t top margin in 1\"/600 (default: 150 = 0.25\")\n"); +- printf(" -l left margin in 1\"/600 (default: 150 = 0.25\")\n"); +- printf(" -r right margin in 1\"/600 (default: 150 = 0.25\")\n"); +- printf(" -b bottom margin in 1\"/600 (default: 150 = 0.25\")\n"); +- printf(" -s paper size (us, a4, default: us)\n"); ++ printf(" -b bottom margin in 1\"/600 (default: 150 = 0.25\")\n"); ++ printf(" -d dumps the configuration to stdout"); + printf(" -f read as parameters\n\n"); ++ printf(" -h displays this help text"); ++ printf(" -l left margin in 1\"/600 (default: 150 = 0.25\")\n"); ++ printf(" -r right margin in 1\"/600 (default: 150 = 0.25\")\n"); ++ printf(" -s paper size (us,letter,legal,a4, default: us)\n"); ++ printf(" -t top margin in 1\"/600 (default: 150 = 0.25\")\n"); ++ printf(" -v printer model (710, 712, 720, 722, 820, or 1000)\n"); ++ printf(" -x vertical offset adjustment in 1\"/600\n"); ++ printf(" -y horizontal offset adjustment in 1\"/600\n"); + printf(" The -x and -y options accumulate. The -v option resets the horizontal and\n"); + printf(" vertical adjustments to an internal default. and default\n"); + printf(" to stdin and stdout. '-' is a synonym for stdin and stdout.\n\n"); +@@ -173,7 +199,13 @@ void show_usage(char* prog) + + void parm_version(char* arg) + { +- if(!strcasecmp(arg,"hp720") || !strcmp(arg,"720")) ++ if(!strcasecmp(arg,"hp710") || !strcmp(arg,"710")) ++ printer.version=HP720; ++ else if(!strcasecmp(arg,"hp712") || !strcmp(arg,"712")) ++ printer.version=HP720; ++ else if(!strcasecmp(arg,"hp720") || !strcmp(arg,"720")) ++ printer.version=HP720; ++ else if(!strcasecmp(arg,"hp722") || !strcmp(arg,"722")) + printer.version=HP720; + else if(!strcasecmp(arg,"hp820") || !strcmp(arg,"820")) + printer.version=HP820; +@@ -191,7 +223,10 @@ void parm_iversion(int arg) + { + switch(arg) + { ++ case 710: ++ case 712: + case 720: ++ case 722: + printer.version=HP720; + break; + case 820: +@@ -262,10 +297,15 @@ void read_config_file(char* fname) + printer.bottom_margin=value; + else if(!strncmp(key,"papersize",len)) + { +- if(!strcmp(buf,"us")) ++ if(!strcmp(buf,"us") || !strcmp(buf,"letter")) ++ { ++ Width = LETTERWIDTH; ++ Height = LETTERHEIGHT; ++ } ++ else if(!strcmp(buf,"legal")) + { +- Width = USWIDTH; +- Height = USHEIGHT; ++ Width = LEGALWIDTH; ++ Height = LEGALHEIGHT; + } + else if(!strcmp(buf,"a4")) + { +@@ -313,15 +353,9 @@ int main (int argc, char *argv[]) + FILE *in=stdin, *out=stdout; + struct stat tmpstat; + +- printer.version = DEFAULT_PRINTER; +- printer.x_offset = DEFAULT_X_OFFSET; +- printer.y_offset = DEFAULT_Y_OFFSET; +- printer.top_margin = DEFAULT_TOP_MARGIN; +- printer.left_margin = DEFAULT_LEFT_MARGIN; +- printer.right_margin = DEFAULT_RIGHT_MARGIN; +- printer.bottom_margin = DEFAULT_BOTTOM_MARGIN; +- Width = USWIDTH; +- Height = USHEIGHT; ++ printer.version = DEFAULT_PRINTER; ++ Width = LETTERWIDTH; ++ Height = LETTERHEIGHT; + set_printer_specific_defaults(); + + if(!stat(defaultcfgfile,&tmpstat)) +@@ -356,10 +390,15 @@ int main (int argc, char *argv[]) + else if(!strcmp(argv[argn],"-s")) + { + argn++; +- if(!strcmp(argv[argn],"us")) ++ if(!strcmp(argv[argn],"us") || !strcmp(argv[argn],"letter")) + { +- Width = USWIDTH; +- Height = USHEIGHT; ++ Width = LETTERWIDTH; ++ Height = LETTERHEIGHT; ++ } ++ else if(!strcmp(argv[argn],"legal")) ++ { ++ Width = LEGALWIDTH; ++ Height = LEGALHEIGHT; + } + else if(!strcmp(argv[argn],"a4")) + { +@@ -414,3 +453,4 @@ int main (int argc, char *argv[]) + return print_pbm (in); + } + ++ +diff -up /dev/null pbm2ppa-0.8.6/pbm2ppa.conf +--- /dev/null 2008-09-24 08:53:03.196006296 +0100 ++++ pbm2ppa-0.8.6/pbm2ppa.conf 2008-09-24 15:15:53.000000000 +0100 +@@ -0,0 +1,58 @@ ++# Sample configuration file for the HP720/HP820/HP1000 PPA Printers ++# ++# This file will be automatically read upon startup if it's placed in ++# /etc/pbm2ppa.conf ++# ++ ++# uncomment options (remove "#" at beginning of line) to activate them ++ ++#valid printer versions are 710, 712, 720, 722. 820, 100 ++# 710 = 712 = 720 = 722: HP DeskJet 710C, 712C, 720C, 722C (default) ++# 820: HP DeskJet 820Cse, 820Cxi ++# 1000: HP DeskJet 1000Cse, 1000Cxi ++#version 720 ++#version 820 ++#version 1000 ++# ++ ++# valid papersizes are us, letter, legal, a4 ++# US Letter (8.5"x11"): us, letter (default) ++# US Legal (8.5"x14"): legal ++# A4 : a4 ++#papersize letter ++#papersize legal ++#papersize a4 ++ ++ ++#Defaults for 720 series: ++# X-offset, Y-Offset: (Adjust these for your printer, see CALIBRATE) ++#xoff 169 ++#yoff -569 ++# 1/4 inch margins all around (at 600 DPI) ++#top 150 ++#bottom 150 ++#left 150 ++#right 150 ++ ++#Defaults for 820 series: ++# X-offset, Y-Offset: (Adjust these for your printer, see CALIBRATE) ++#xoff 75 ++#yoff -500 ++# 1/4 inch margins all around (at 600 DPI) ++#top 80 ++#bottom 150 ++#left 80 ++#right 80 ++ ++#Defaults for 820 series: ++# X-offset, Y-Offset: (Adjust these for your printer, see CALIBRATE) ++#xoff 100 ++#yoff -650 ++# 1/4 inch margins all around (at 600 DPI) ++#top 150 ++#bottom 150 ++#left 150 ++#right 150 ++ ++ ++ +diff -up pbm2ppa-0.8.6/pbm2ppa.conf.hp1000.20000205 pbm2ppa-0.8.6/pbm2ppa.conf.hp1000 +--- pbm2ppa-0.8.6/pbm2ppa.conf.hp1000.20000205 1998-10-19 02:27:19.000000000 +0100 ++++ pbm2ppa-0.8.6/pbm2ppa.conf.hp1000 2008-09-24 15:17:47.000000000 +0100 +@@ -1,18 +0,0 @@ +-# Sample configuration file for the HP720 +-# +-# This file will be automatically read upon startup if it's placed in +-# /etc/pbm2ppa.conf +-# +- +-version 1000 +- +-papersize us +- +-xoff 100 # \ Adjust these for your printer. +-yoff -650 # / (see CALIBRATE) +- +-# 1/4 inch margins all around (at 600 DPI) +-top 150 +-bottom 150 +-left 150 +-right 150 +diff -up pbm2ppa-0.8.6/pbm2ppa.conf.hp720.20000205 pbm2ppa-0.8.6/pbm2ppa.conf.hp720 +--- pbm2ppa-0.8.6/pbm2ppa.conf.hp720.20000205 1998-10-19 02:27:20.000000000 +0100 ++++ pbm2ppa-0.8.6/pbm2ppa.conf.hp720 2008-09-24 15:17:47.000000000 +0100 +@@ -1,18 +0,0 @@ +-# Sample configuration file for the HP720 +-# +-# This file will be automatically read upon startup if it's placed in +-# /etc/pbm2ppa.conf +-# +- +-version 720 +- +-papersize us +- +-xoff 169 # \ Adjust these for your printer. +-yoff -569 # / (see CALIBRATE) +- +-# 1/4 inch margins all around (at 600 DPI) +-top 150 +-bottom 150 +-left 150 +-right 150 +diff -up pbm2ppa-0.8.6/pbm2ppa.conf.hp820.20000205 pbm2ppa-0.8.6/pbm2ppa.conf.hp820 +--- pbm2ppa-0.8.6/pbm2ppa.conf.hp820.20000205 1998-10-19 02:27:21.000000000 +0100 ++++ pbm2ppa-0.8.6/pbm2ppa.conf.hp820 2008-09-24 15:17:47.000000000 +0100 +@@ -1,18 +0,0 @@ +-# Sample configuration file for the HP820 +-# +-# This file will be automatically read upon startup if it's placed in +-# /etc/pbm2ppa.conf +-# +- +-version 820 +- +-papersize us +- +-xoff 75 # \ Adjust these for your printer. +-yoff -500 # / (see CALIBRATE) +- +-# 1/4 inch margins all around (at 600 DPI) +-top 80 +-bottom 150 +-left 80 +-right 80 +diff -up pbm2ppa-0.8.6/pbmtpg.c.20000205 pbm2ppa-0.8.6/pbmtpg.c +--- pbm2ppa-0.8.6/pbmtpg.c.20000205 1998-09-16 01:00:28.000000000 +0100 ++++ pbm2ppa-0.8.6/pbmtpg.c 2008-09-24 15:15:53.000000000 +0100 +@@ -1,13 +1,19 @@ + #include + #include + #include ++#include + +-/* Support both US and A4. */ ++/* Support US Letter, Legal, and A4. */ + +-/* US is 8.5 in by 11 in */ ++/* US Letter is 8.5 in by 11 in */ + +-#define USWIDTH (5100) +-#define USHEIGHT (6600) ++#define LETTERWIDTH (5100) ++#define LETTERHEIGHT (6600) ++ ++/* US Legal is 8.5 in by 14 in */ ++ ++#define LEGALWIDTH (5100) ++#define LEGALHEIGHT (8400) + + /* A4 is 210 mm by 297 mm == 8.27 in by 11.69 in */ + +@@ -137,8 +143,24 @@ int main(int argc,char** argv) + char buf[128]; + char *progname = *argv; + +- Width = USWIDTH; +- Height = USHEIGHT; ++ Width = LETTERWIDTH; ++ Height = LETTERHEIGHT; ++ if(argc>1 && strcmp(argv[1], "-letter")==0) ++ { ++ Width = LETTERWIDTH; ++ Height = LETTERHEIGHT; ++ argc--; ++ argv++; ++ } ++ ++ if(argc>1 && strcmp(argv[1], "-legal")==0) ++ { ++ Width = LEGALWIDTH; ++ Height = LEGALHEIGHT; ++ argc--; ++ argv++; ++ } ++ + if(argc>1 && strcmp(argv[1], "-a4")==0) + { + Width = A4WIDTH; +@@ -146,6 +168,9 @@ int main(int argc,char** argv) + argc--; + argv++; + } ++ ++ ++ + Pwidth = (Width+7)/8; + bitmap = (char *)malloc(Pwidth*Height); + +@@ -192,6 +217,7 @@ int main(int argc,char** argv) + return 1; + } + ++ Width = 8*Pwidth ; /* here need 8*Pwidth as the Width ! */ + printf("P4\n%d %d\n",Width,Height); + + for(x=0; x +-helpful! ++The best way to integrate support for the HP PPA Printers into RedHat's ++Linux Print System Manager (printtool) is to replace e.g., the ++rhs-printfilters-1.57-3 RPM package that comes with Red Hat 6.1, ++with a PPA-aware version from the pnm2ppa project whic h has a ++homepage at http://www.sourceforge.net/projects/?group_id=1322 + +-Here is a tip to intergrate HP720C support in RedHat's printtool: ++At the time of writing, the latest release is ++ rhs-printfilters-1.57-4ppa1 ++This package includes support for both pbm2ppa and the new ++color driver pnm2ppa. + +-Install pbm2ppa. Copy pbm2ppa to /usr/bin. +-Edit "printerdb" (in my system it is found in +-/usr/lib/rhs/rhs-printfilters ) +-and append the following lines: ++ ------------------------------------- ++ ++If for some reason, they cannot use this PPA-aware version of ++rhs-printfilters, RedHat users may still find the following tip from ++Panayotis Vryonis helpful! ++It will work with the standard rhs-printfilters that comes with the ++Red Hat release: ++ ++ Here is a tip to integrate HP720C support in RedHat's printtool: ++ ++ Install pbm2ppa. Copy pbm2ppa to /usr/bin. ++ Edit "printerdb" (in my system it is found in ++ /usr/lib/rhs/rhs-printfilters ) ++ and append the following lines: + ----------------------Cut here + ------------------------------------------- + StartEntry: DeskJet720C +@@ -23,7 +39,11 @@ StartEntry: DeskJet720C + EndEntry + -------------------------------------------------------------------------- + +-Now you can add an HP720C printer just like any other, using printtool. ++ Now you can add an HP720C printer just like any other, using printtool. ++ ++ [Author's (P. Vryonis) Note: The same should work for the 820 and ++ 1000, but it hasn't been tested. Also, use the pbmraw GSDriver if ++ you have it; it's faster. ] ++ ++ + +-[Author's Note: The same should work for the 820 and 1000, but it hasn't +-been tested. Also, use the pbmraw GSDriver if you have it; it's faster. ] diff --git a/SOURCES/pnm2ppa-coverity-return-local.patch b/SOURCES/pnm2ppa-coverity-return-local.patch new file mode 100644 index 0000000..ce7e1d3 --- /dev/null +++ b/SOURCES/pnm2ppa-coverity-return-local.patch @@ -0,0 +1,52 @@ +diff -up pnm2ppa-1.04/calibrate_ppa.c.coverity-return-local pnm2ppa-1.04/calibrate_ppa.c +--- pnm2ppa-1.04/calibrate_ppa.c.coverity-return-local 2000-11-11 22:22:38.000000000 +0000 ++++ pnm2ppa-1.04/calibrate_ppa.c 2011-05-20 16:04:23.233425268 +0100 +@@ -75,7 +75,7 @@ main (int argc, char *argv[]) + BOOLEAN gamma = false ; + FILE *outFile = NULL ; + int testPattern = 0; +- char *out_filepath = NULL; ++ char out_filepath[MAXPATHLEN]; + char c; + static struct option long_opts[] = { + {"gamma",0,0,'g'}, +@@ -157,9 +157,7 @@ main (int argc, char *argv[]) + { + if ( strlen(optarg) < MAXPATHLEN ) + { +- char filepath[MAXPATHLEN]; +- strncpy(filepath, optarg, MAXPATHLEN); +- out_filepath = filepath ; ++ strncpy(out_filepath, optarg, MAXPATHLEN); + use_stdout = false ; + } + } +diff -up pnm2ppa-1.04/pnm2ppa.c.coverity-return-local pnm2ppa-1.04/pnm2ppa.c +--- pnm2ppa-1.04/pnm2ppa.c.coverity-return-local 2000-11-11 19:53:03.000000000 +0000 ++++ pnm2ppa-1.04/pnm2ppa.c 2011-05-20 16:04:23.234425246 +0100 +@@ -145,20 +145,15 @@ print_pnm (FILE * fptr) + char * + readPath(char *input ) + { +- char File_path[MAXPATHLEN]; + char *path = NULL; + /* security audit ajv 20001007; be very careful with input strings!*/ + if (strlen(input) < MAXPATHLEN ) + { +- if ( strncpy (File_path, input, MAXPATHLEN )) +- { +- /* +- a user-specifed file *File_path may later be opened; +- should any extra validation of this be performed now ? +- */ +- path = File_path; +- return path; +- } ++ path = strdup(input); ++ /* ++ a user-specifed file *path may later be opened; ++ should any extra validation of this be performed now ? ++ */ + } + else + { diff --git a/SOURCES/pnm2ppa-gcc10.patch b/SOURCES/pnm2ppa-gcc10.patch new file mode 100644 index 0000000..223f310 --- /dev/null +++ b/SOURCES/pnm2ppa-gcc10.patch @@ -0,0 +1,25 @@ +diff --git a/syslog.c b/syslog.c +index e70f12c..af067e2 100644 +--- a/syslog.c ++++ b/syslog.c +@@ -27,6 +27,7 @@ + #include "global.h" + + ++char syslog_message[128]; + + /* + For some reason, BeOS doesn't seem to implement syslog(), even though it is +diff --git a/syslog.h b/syslog.h +index 7d0e436..5c1accd 100644 +--- a/syslog.h ++++ b/syslog.h +@@ -39,7 +39,7 @@ + #include + #endif + +-char syslog_message[128]; ++extern char syslog_message[128]; + extern size_t message_size ; + + void wrap_syslog( int, char *, char *); diff --git a/SOURCES/pnm2ppa-ldflags.patch b/SOURCES/pnm2ppa-ldflags.patch new file mode 100644 index 0000000..53b4e78 --- /dev/null +++ b/SOURCES/pnm2ppa-ldflags.patch @@ -0,0 +1,52 @@ +diff -up pnm2ppa-1.04/Makefile.ldflags pnm2ppa-1.04/Makefile +--- pnm2ppa-1.04/Makefile.ldflags 2018-03-01 15:38:09.225582684 +0100 ++++ pnm2ppa-1.04/Makefile 2018-03-01 15:50:34.307261745 +0100 +@@ -11,7 +11,6 @@ INSTALL=install + + # production build + CFLAGS=$(RPM_OPT_FLAGS) -DNDEBUG +-LDFLAGS=-lm + OBJS = pnm2ppa.o syslog.o ppa.o image.o dither.o cutswath.o hash_ink.o gamma.o + SRC = pnm2ppa.c syslog.c ppa.c image.c dither.c cutswath.c hash_ink.c gamma.c + +@@ -108,10 +107,10 @@ uninstall: + rm -f $(CONFDIR)/pnm2ppa.conf + + pnm2ppa: $(OBJS) +- $(CC) $(LDFLAGS) $(CFLAGS) -o pnm2ppa $(OBJS) ++ $(CC) -lm $(LDFLAGS) $(CFLAGS) -o pnm2ppa $(OBJS) + + calibrate_ppa: calibrate_ppa.o pnmtools.o gamma.o +- $(CC) $(LDFLAGS) $(CFLAGS) -o calibrate_ppa calibrate_ppa.o pnmtools.o gamma.o ++ $(CC) -lm $(LDFLAGS) $(CFLAGS) -o calibrate_ppa calibrate_ppa.o pnmtools.o gamma.o + + calibrate_ppa.o: calibrate_ppa.c global.h image.h defaults.h pnmtools.h + $(CC) $(CFLAGS) -c calibrate_ppa.c +@@ -144,7 +143,7 @@ syslog.o: syslog.c syslog.h global.h + $(CC) $(CFLAGS) -c syslog.c + + make_hash_ink: make_hash_ink.c palette.h hash_ink.h +- $(CC) $(CFLAGS) -o make_hash_ink make_hash_ink.c ++ $(CC) $(CFLAGS) -lm $(LDFLAGS) -o make_hash_ink make_hash_ink.c + + hash_ink.c: make_hash_ink + ./make_hash_ink 4 3 > hash_ink.c +diff -up pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile.ldflags pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile +--- pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile.ldflags 2018-03-01 15:38:09.226582676 +0100 ++++ pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile 2018-03-01 15:53:22.016739424 +0100 +@@ -1,6 +1,5 @@ + CC=gcc + CFLAGS=$(RPM_OPT_FLAGS) +-LDFLAGS= + PRINTER=HP720 + + default: all +@@ -23,7 +22,7 @@ pbm2ppa: pbm2ppa.o ppa.o pbm.o cutswath. + $(CC) $(LDFLAGS) -o pbm2ppa pbm2ppa.o ppa.o pbm.o cutswath.o + + pbmtpg: pbmtpg.o +- $(CC) $(CFLAGS) -o pbmtpg pbmtpg.o -lm ++ $(CC) $(CFLAGS) $(LDFLAGS) -o pbmtpg pbmtpg.o -lm + + .c.o: $*.c ppa.h pbm.h + $(CC) $(CFLAGS) -DDEFAULT_PRINTER=$(PRINTER) -c $*.c diff --git a/SOURCES/pnm2ppa-optargs-read.patch b/SOURCES/pnm2ppa-optargs-read.patch new file mode 100644 index 0000000..a837955 --- /dev/null +++ b/SOURCES/pnm2ppa-optargs-read.patch @@ -0,0 +1,13 @@ +diff --git a/pnm2ppa.c b/pnm2ppa.c +index 4ae36ce..0d60fbb 100644 +--- a/pnm2ppa.c ++++ b/pnm2ppa.c +@@ -604,7 +604,7 @@ main (int argc, char *argv[]) + int i, opt_index; + FILE *in = NULL, *out = NULL, *gf = NULL; + struct stat tmpstat; +- char c; ++ int c; + BOOLEAN get_Gamma = true; + + char *gammaFile=NULL; diff --git a/SOURCES/pnm2ppa-redhat.patch b/SOURCES/pnm2ppa-redhat.patch new file mode 100644 index 0000000..f3294a1 --- /dev/null +++ b/SOURCES/pnm2ppa-redhat.patch @@ -0,0 +1,33 @@ +diff -up pnm2ppa-1.04/Makefile.rh pnm2ppa-1.04/Makefile +--- pnm2ppa-1.04/Makefile.rh 2000-11-02 18:33:08.000000000 +0000 ++++ pnm2ppa-1.04/Makefile 2008-09-24 15:18:26.000000000 +0100 +@@ -10,7 +10,7 @@ CC=gcc + INSTALL=install + + # production build +-CFLAGS=-Wall -pedantic -O2 -g -DNDEBUG ++CFLAGS=$(RPM_OPT_FLAGS) -DNDEBUG + LDFLAGS=-lm + OBJS = pnm2ppa.o syslog.o ppa.o image.o dither.o cutswath.o hash_ink.o gamma.o + SRC = pnm2ppa.c syslog.c ppa.c image.c dither.c cutswath.c hash_ink.c gamma.c +diff -up pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile.rh pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile +--- pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile.rh 2008-09-24 15:18:26.000000000 +0100 ++++ pnm2ppa-1.04/pbm2ppa-0.8.6/Makefile 2008-09-24 15:18:26.000000000 +0100 +@@ -1,5 +1,5 @@ + CC=gcc +-CFLAGS=-Wall -O2 ++CFLAGS=$(RPM_OPT_FLAGS) + LDFLAGS= + PRINTER=HP720 + +diff -up pnm2ppa-1.04/pnm2ppa.conf.rh pnm2ppa-1.04/pnm2ppa.conf +--- pnm2ppa-1.04/pnm2ppa.conf.rh 2000-10-28 16:02:57.000000000 +0100 ++++ pnm2ppa-1.04/pnm2ppa.conf 2008-09-24 15:18:26.000000000 +0100 +@@ -12,7 +12,6 @@ + # will be used. The printer version can also be set with the command line + # option e.g., "-v 720". + +-version ERROR # PNM2PPA WIIL *NOT* WORK UNTIUL THIS ENTRY IS REMOVED!!!! + #version 720 # 710, 712, 722 also acceptable + #version 820 + #version 1000 diff --git a/SPECS/pnm2ppa.spec b/SPECS/pnm2ppa.spec new file mode 100644 index 0000000..4fcf337 --- /dev/null +++ b/SPECS/pnm2ppa.spec @@ -0,0 +1,312 @@ +Name: pnm2ppa +Summary: Drivers for printing to HP PPA printers +Epoch: 1 +Version: 1.04 +Release: 52%{?dist} +URL: http://sourceforge.net/projects/pnm2ppa +Source: http://download.sourceforge.net/pnm2ppa/pnm2ppa-%{version}.tar.gz +# Following sourcelink is dead currently. +Source1: http://www.httptech.com/ppa/files/ppa-0.8.6.tar.gz +# Upstream sync. +Patch2: pbm2ppa-20000205.diff +# Use RPM_OPT_FLAGS. +Patch3: pnm2ppa-redhat.patch +# Don't return a local variable out of scope (bug #704568). +Patch4: pnm2ppa-coverity-return-local.patch +# add ldflags to Makefile +Patch5: pnm2ppa-ldflags.patch +# FTBFS with GCC 10 +Patch6: pnm2ppa-gcc10.patch +# fix argument reading for non x86_64 archs - use int instead of char +Patch7: pnm2ppa-optargs-read.patch +License: GPLv2+ + +# gcc is no longer in buildroot by default +BuildRequires: gcc +# uses make +BuildRequires: make + +# foomatic is needed for using the filters in CUPS +Requires: foomatic + +%description +Pnm2ppa is a color driver for HP PPA host-based printers such as the +HP710C, 712C, 720C, 722C, 820Cse, 820Cxi, 1000Cse, and 1000Cxi. +Pnm2ppa accepts Ghostscript output in PPM format and sends it to the +printer in PPA format. + +Install pnm2ppa if you need to print to a PPA printer. + +%prep +%setup -q + +#pbm2ppa source +%setup -q -T -D -a 1 +%patch2 -p0 -b .20000205 +%patch3 -p1 -b .rh +%patch4 -p1 -b .coverity-return-local +%patch5 -p1 -b .ldflags +%patch6 -p1 -b .gcc10 +%patch7 -p1 -b .optargs-read + +for file in docs/en/LICENSE pbm2ppa-0.8.6/LICENSE; do + sed "s|\r||g" $file > $file.new && \ + touch -r $file $file.new && \ + mv $file.new $file +done + +%build +# set redhat build flags +%set_build_flags +%make_build +pushd pbm2ppa-0.8.6 +%make_build +popd + + +%install +install -d $RPM_BUILD_ROOT%{_bindir} +install -d $RPM_BUILD_ROOT%{_sysconfdir} +install -d $RPM_BUILD_ROOT%{_mandir}/man1 +make INSTALLDIR=$RPM_BUILD_ROOT%{_bindir} CONFDIR=$RPM_BUILD_ROOT%{_sysconfdir} \ + MANDIR=$RPM_BUILD_ROOT%{_mandir}/man1 install +install -p -m 0755 utils/Linux/detect_ppa $RPM_BUILD_ROOT%{_bindir} +install -p -m 0755 utils/Linux/test_ppa $RPM_BUILD_ROOT%{_bindir} +install -p -m 0755 pbm2ppa-0.8.6/pbm2ppa $RPM_BUILD_ROOT%{_bindir} +install -p -m 0755 pbm2ppa-0.8.6/pbmtpg $RPM_BUILD_ROOT%{_bindir} +install -p -m 0644 pbm2ppa-0.8.6/pbm2ppa.conf $RPM_BUILD_ROOT%{_sysconfdir} +install -p -m 0644 pbm2ppa-0.8.6/pbm2ppa.1 $RPM_BUILD_ROOT%{_mandir}/man1 + +chmod 644 docs/en/LICENSE +mkdir -p pbm2ppa +for file in CALIBRATION CREDITS INSTALL INSTALL-MORE LICENSE README ; do + install -p -m 0644 pbm2ppa-0.8.6/$file pbm2ppa/$file +done + + +%files +%license docs/en/LICENSE +%doc docs/en/CREDITS docs/en/INSTALL docs/en/README +%doc docs/en/RELEASE-NOTES docs/en/TODO +%doc docs/en/INSTALL.REDHAT.txt docs/en/COLOR.txt docs/en/CALIBRATION.txt +%doc docs/en/INSTALL.REDHAT.html docs/en/COLOR.html docs/en/CALIBRATION.html +%doc test.ps +%doc pbm2ppa +%{_bindir}/pnm2ppa +%{_bindir}/pbm2ppa +%{_bindir}/pbmtpg +%{_bindir}/calibrate_ppa +%{_bindir}/test_ppa +%{_bindir}/detect_ppa +%{_mandir}/man1/pnm2ppa.1* +%{_mandir}/man1/pbm2ppa.1* +%config(noreplace) %{_sysconfdir}/pnm2ppa.conf +%config(noreplace) %{_sysconfdir}/pbm2ppa.conf + +%changelog +* Mon Aug 09 2021 Mohan Boddu - 1:1.04-52 +- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags + Related: rhbz#1991688 + +* Fri Apr 16 2021 Mohan Boddu - 1:1.04-51 +- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937 + +* Wed Jan 27 2021 Fedora Release Engineering - 1:1.04-50 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild + +* Thu Nov 05 2020 Zdenek Dohnal - 1:1.04-49 +- make is no longer in buildroot by default + +* Tue Aug 04 2020 Zdenek Dohnal - 1:1.04-48 +- fix argument reading for non x86_64 archs - use int instead of char + +* Mon Aug 03 2020 Zdenek Dohnal - 1:1.04-47 +- add foomatic as a dependency, because pnm2ppa drivers are not available as a driver without it + +* Tue Jul 28 2020 Fedora Release Engineering - 1:1.04-46 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild + +* Mon Feb 03 2020 Zdenek Dohnal - 1:1.04-45 +- FTBFS with GCC 10 + +* Thu Jan 30 2020 Fedora Release Engineering - 1:1.04-44 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild + +* Fri Jul 26 2019 Fedora Release Engineering - 1:1.04-43 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild + +* Sat Feb 02 2019 Fedora Release Engineering - 1:1.04-42 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild + +* Tue Jul 24 2018 Zdenek Dohnal - 1:1.04-41 +- correcting license + +* Fri Jul 13 2018 Fedora Release Engineering - 1:1.04-40 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild + +* Wed Jul 11 2018 Zdenek Dohnal - 1:1.04-39 +- ship license in %%license tag + +* Thu Mar 01 2018 Zdenek Dohnal - 1:1.04-38 +- 1548734 - pnm2ppa: Partial Fedora build flags injection + +* Mon Feb 19 2018 Zdenek Dohnal - 1:1.04-37 +- gcc is no longer in buildroot by default + +* Fri Feb 09 2018 Fedora Release Engineering - 1:1.04-36 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild + +* Thu Feb 08 2018 Zdenek Dohnal - 1:1.04-35 +- remove old stuff https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/MRWOMRZ6KPCV25EFHJ2O67BCCP3L4Y6N/ + +* Thu Aug 03 2017 Fedora Release Engineering - 1:1.04-34 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild + +* Thu Jul 27 2017 Fedora Release Engineering - 1:1.04-33 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild + +* Sat Feb 11 2017 Fedora Release Engineering - 1:1.04-32 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild + +* Thu Feb 04 2016 Fedora Release Engineering - 1:1.04-31 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild + +* Thu Jun 18 2015 Fedora Release Engineering - 1:1.04-30 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild + +* Sun Aug 17 2014 Fedora Release Engineering - 1:1.04-29 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild + +* Sat Jun 07 2014 Fedora Release Engineering - 1:1.04-28 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild + +* Sun Aug 04 2013 Fedora Release Engineering - 1:1.04-27 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild + +* Thu Feb 14 2013 Fedora Release Engineering - 1:1.04-26 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild + +* Tue Oct 23 2012 Tim Waugh - 1:1.04-25 +- Fixed license tag. pnm2ppa is GPLv2+; pbm2ppa is GPLv2. + +* Sat Jul 21 2012 Fedora Release Engineering - 1:1.04-24 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild + +* Sat Jan 14 2012 Fedora Release Engineering - 1:1.04-23 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild + +* Fri May 20 2011 Tim Waugh - 1:1.04-22 +- Don't return a local variable out of scope (bug #704568). + +* Wed Feb 09 2011 Fedora Release Engineering - 1:1.04-21 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild + +* Tue Oct 05 2010 Parag Nemade - 1:1.04-20 +- Merge-review cleanup (#226303) + +* Fri Mar 5 2010 Tim Waugh - 1:1.04-19 +- Consistent use of macros. +- Removed ancient obsoletes tag. +- Clean buildroot in install section not prep section. +- Make setup quiet. +- Use noreplace for config files. + +* Sun Jul 26 2009 Fedora Release Engineering - 1:1.04-18 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild + +* Thu Feb 26 2009 Fedora Release Engineering - 1:1.04-17 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild + +* Wed Sep 24 2008 Tim Waugh 1:1.04-16 +- Removed patch fuzz. + +* Wed Feb 13 2008 Tim Waugh 1:1.04-15 +- Rebuild for GCC 4.3. + +* Wed Aug 29 2007 Tim Waugh 1:1.04-14 +- Added dist tag. +- Fixed summary. +- Better buildroot tag. +- More specific license tag. + +* Wed Jul 12 2006 Jesse Keating - 1:1.04-13.2.2 +- rebuild + +* Fri Feb 10 2006 Jesse Keating - 1:1.04-13.2.1 +- bump again for double-long bug on ppc(64) + +* Tue Feb 07 2006 Jesse Keating - 1:1.04-13.2 +- rebuilt for new gcc4.1 snapshot and glibc changes + +* Fri Dec 09 2005 Jesse Keating +- rebuilt + +* Wed Mar 16 2005 Tim Waugh 1:1.04-13 +- Rebuild for new GCC. + +* Wed Feb 9 2005 Tim Waugh 1:1.04-12 +- s/Copyright:/License:/. +- s/Serial:/Epoch:/. +- Rebuilt. + +* Tue Jun 15 2004 Elliot Lee +- rebuilt + +* Thu Feb 19 2004 Tim Waugh +- rebuilt + +* Fri Feb 13 2004 Elliot Lee +- rebuilt + +* Wed Jun 04 2003 Elliot Lee +- rebuilt + +* Wed Jan 22 2003 Tim Powers +- rebuilt + +* Wed Nov 20 2002 Tim Powers +- rebuild in current collinst + +* Fri Jun 21 2002 Tim Powers +- automated rebuild + +* Thu May 23 2002 Tim Powers +- automated rebuild + +* Wed Jan 09 2002 Tim Powers +- automated rebuild + +* Sun Jun 24 2001 Elliot Lee +- Bump release + rebuild. + +* Mon Dec 11 2000 Crutcher Dunnavant +- Upgrade to 1.04, editied the pbm2ppa patch to add +- to pbmtpg.c, which uses strmp, edited the redhat patch to +- apply cleanly. + +* Thu Aug 17 2000 Bill Nottingham +- tweak summary + +* Thu Aug 3 2000 Bill Nottingham +- build upstream package + +* Tue Jul 11 2000 Duncan Haldane +- updated for 1.0 release. + +* Mon Jul 10 2000 Florian La Roche +- remove execute bits from config file and man-page + +* Sun Apr 09 2000 +- added optional updated rhs-printfilter files + +* Thu Feb 10 2000 Bill Nottingham +- adopt upstream package + +* Sun Feb 6 2000 +- new pnm2ppa release, and add pbm2ppa driver. + +* Thu Jan 6 2000 +- created rpm + + +