#! /bin/bash -eu

# Script for checking various microcode caveats

#

#

# SPDX-License-Identifier: CC0-1.0

: ${MC_CAVEATS_DATA_DIR=/usr/share/microcode_ctl/ucode_with_caveats}

: ${FW_DIR=/lib/firmware}

: ${CFG_DIR=/etc/microcode_ctl/ucode_with_caveats}

usage() {

	echo 'Usage: check_caveats [-d] [-e] [-k TARGET_KVER] [-c CONFIG]'

	echo '                     [-m] [-v]'

	echo

	echo '   -d - enables disclaimer printing mode'

	echo '   -e - check for early microcode load possibility (instead of'

	echo '        late microcode load)'

	echo '   -k - target version to check against, $(uname -r) is used'

	echo '        otherwise'

	echo '   -c - caveat config(s) to check, all configs are checked'

	echo '        otherwise'

	echo '   -m - check that caveats actually apply to the current model'

	echo '   -v - verbose output'

	echo

	echo 'Environment:'

	echo '  MC_CAVEATS_DATA_DIR - directory that contains caveats'

	echo '                        configuration data'

}

debug() { [ 0 = "$verbose" ] || echo "$*" >&2; }

# A simplified RPM version comparison that takes into account knowledge about

# Y- and Z-streams (so it compares versions inside Y-stram or Z-stream if

# the version against which comparison is performed has appropriate versioning

# scheme).

#

# $1 - kernel version to check

# $* - list of kernel versions to check against

check_kver()

{

	local t_major= t_minor= t_patch= t_y= t_z1= t_z2= t_rest=

	local m_major= m_minor= m_patch= m_y= m_z1= m_z2= m_rest=

	local cmp_type=

	# IFS=.- read -r t_major t_minor t_patch t_y t_z1 t_z2 t_rest <<<"$1"

	# "cannot create temp file for here-document: Read-only file system"

	# that's why we can't have nice things.

	t_major=${1%%.*}

	t_rest=${1#${t_major}}

	t_rest=${t_rest#.}

	t_minor=${t_rest%%.*}

	t_rest=${t_rest#${t_minor}}

	t_rest=${t_rest#.}

	t_patch=${t_rest%%-*}

	t_rest=${t_rest#${t_patch}}

	t_rest=${t_rest#-}

	t_y=${t_rest%%.*}

	t_rest=${t_rest#${t_y}}

	t_rest=${t_rest#.}

	t_z1=${t_rest%%.*}

	t_rest=${t_rest#${t_z1}}

	t_rest=${t_rest#.}

	t_z2=${t_rest%%.*}

	# minor/major/patch/y should be numeric

	[ -n "${t_major##*[!0-9]*}" ] || return 1

	[ -n "${t_minor##*[!0-9]*}" ] || return 1

	[ -n "${t_patch##*[!0-9]*}" ] || return 1

	[ -n "${t_y##*[!0-9]*}" ] || return 1

	# reset z1/z2 to zero if non-numeric

	[ -n "${t_z1##*[!0-9]*}" ] || t_z1=0

	[ -n "${t_z2##*[!0-9]*}" ] || t_z2=0

	while [ 1 -lt "$#" ]; do

		cmp_type=upstream

		shift

		m_major=${1%%.*}

		m_rest=${1#${m_major}}

		m_rest=${m_rest#.}

		m_minor=${m_rest%%.*}

		m_rest=${m_rest#${m_minor}}

		m_rest=${m_rest#.}

		m_patch=${m_rest%%-*}

		m_rest=${m_rest#${m_patch}}

		m_rest=${m_rest#-}

		m_y=${m_rest%%.*}

		m_rest=${m_rest#${m_y}}

		m_rest=${m_rest#.}

		m_z1=${m_rest%%.*}

		m_rest=${m_rest#${m_z1}}

		m_rest=${m_rest#.}

		m_z2=${m_rest%%.*}

		# minor/major/patch should be numeric

		[ -n "${m_major##*[!0-9]*}" ] || continue

		[ -n "${m_minor##*[!0-9]*}" ] || continue

		[ -n "${m_patch##*[!0-9]*}" ] || continue

		# reset z1/z2 to zero if non-numeric

		[ -n "${m_y##*[!0-9]*}" ] && cmp_type=y || m_y=0

		[ -n "${m_z1##*[!0-9]*}" ] && cmp_type=z || m_z1=0

		[ -n "${m_z2##*[!0-9]*}" ] && cmp_type=z || m_z2=0

		# Comparing versions

		case "$cmp_type" in

		upstream)

			[ "$t_major" -ge "$m_major" ] || continue

			[ "$t_minor" -ge "$m_minor" ] || continue

			[ "$t_patch" -ge "$m_patch" ] || continue

			return 0

			;;

		y)

			[ "$t_major" -eq "$m_major" ] || continue

			[ "$t_minor" -eq "$m_minor" ] || continue

			[ "$t_patch" -eq "$m_patch" ] || continue

			[ "$t_y" -ge "$m_y" ] || continue

			return 0

			;;

		z)

			[ "$t_major" -eq "$m_major" ] || continue

			[ "$t_minor" -eq "$m_minor" ] || continue

			[ "$t_patch" -eq "$m_patch" ] || continue

			[ "$t_y" -eq "$m_y" ] || continue

			[ "$t_z1" -ge "$m_z1" ] || continue

			[ "$t_z2" -ge "$m_z2" ] || continue

			return 0

			;;

		esac

	done

	return 1

}

# It is needed for SKX[1] for which different product segments

# are differentiated by a value in the CAPID0 field of PCU registers

# device[2].

# [1] https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/21

# [2] https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-scalable-spec-update.pdf#page=13

#

# $1 - params in config file, space-separated, in key=value form:

#   domain=* - PCI domain, '*' or number

#   bus=* - PCI bus, '*' or number

#   device=* - PCI device, '*' or number

#   function=* - PCI function, '*' or number

#   vid= - PCI vendor ID, empty or number

#   did= - PCI device ID, empty or number

#   offset=0 - offset in configuration space

#   size=4 - field size

#   mask=0 - mask applied to the data read

#   val=0 - comma-separated list of possible values

#   mode=success-any [ success-ail, fail-any, fail-all ] - matching mode:

#     success-any: Returns 0 if there was at least one match, otherwise 1.

#     success-all: Returns 0 if there was at least one device checked and all

#                  the checked devices have matches, otherwise 1.

#     fail-any:    Returns 1 if there was at least one match, otherwise 0.

#     fail-all:    Returns 1 if there was at least one device checked and all

#                  the checked devices have matches, otherwise 0.

# $2 - whether model filter is engaged (if it is not '1', just return the result

#      based on "mode" value that assumes that there were 0 checks/0 matches).

check_pci_config_val()

{

	local domain='*' bus='*' device='*' func='*' vid= did=

	local offset=0 size=4 mask=0 val=0 mode=success-any

	local checked=0 matched=0 path=''

	local dev_path dev_vid dev_did dev_val

	local opts="${1:-}"

	local match_model="${2:-0}"

	set -- $1

	while [ "$#" -gt 0 ]; do

		[ "x${1#domain=}" = "x${1}" ] || domain="${1#domain=}"

		[ "x${1#bus=}" = "x${1}" ] || bus="${1#bus=}"

		[ "x${1#device=}" = "x${1}" ] || device="${1#device=}"

		[ "x${1#function=}" = "x${1}" ] || func="${1#function=}"

		[ "x${1#vid=}" = "x${1}" ] || vid="${1#vid=}"

		[ "x${1#did=}" = "x${1}" ] || did="${1#did=}"

		[ "x${1#offset=}" = "x${1}" ] || offset="${1#offset=}"

		[ "x${1#size=}" = "x${1}" ] || size="${1#size=}"

		[ "x${1#mask=}" = "x${1}" ] || mask="${1#mask=}"

		[ "x${1#val=}" = "x${1}" ] || val="${1#val=}"

		[ "x${1#mode=}" = "x${1}" ] || mode="${1#mode=}"

		shift

	done

	path="$domain"

	if [ "x$bus" = 'x*' ]; then

		path="$path:$bus";

	else

		path=$(printf '%s:%02x' "$path" "$bus")

	fi

	if [ "x$device" = 'x*' ]; then

		path="$path:$device";

	else

		path=$(printf '%s:%02x' "$path" "$device")

	fi

	if [ "x$func" = 'x*' ]; then

		path="$path.$func";

	else

		path=$(printf '%s.%01x' "$path" "$func")

	fi

	# Normalise VID, DID

	[ -n "$vid" ] || vid="$(printf '0x%04x' "$vid")"

	[ -n "$did" ] || did="$(printf '0x%04x' "$did")"

	( [ 1 != "$match_model" ] \

	  || /usr/bin/find /sys/bus/pci/devices/ -maxdepth 1 -name "$path" \

	  || : ) | (

		while read -r dev_path; do

			# Filter VID, DID

			if [ -n "$vid" ]; then

				dev_vid=$(/bin/cat "$dev_path/vendor")

				[ "x$vid" = "x$dev_vid" ] || continue

			fi

			if [ -n "$did" ]; then

				dev_did=$(/bin/cat "$dev_path/device")

				[ "x$did" = "x$dev_did" ] || continue

			fi

			checked="$((checked + 1))"

			dev_val="$(/usr/bin/od -j "$offset" -N "$size" -A n \

					       -t "u$size" "$dev_path/config")"

			val_rest="${val}"

			while :; do

				cur_val="${val_rest%%,*}"

				if [ "$((dev_val & mask))" = "$((cur_val & mask))" ]

				then

					matched="$((matched + 1))"

					break

				fi

				[ "x${val_rest}" != "x${val_rest#*,}" ] || break

				val_rest="${val_rest#*,}"

			done

			case "$mode" in

			success-any) [ "$matched" -eq 0 ] || { echo 0; exit; } ;;

			success-all) [ "$matched" -eq "$checked" ] || { echo 1; exit; } ;;

			fail-any)    [ "$matched" -eq 0 ] || { echo 1; exit; } ;;

			fail-all)    [ "$matched" -eq "$checked" ] || { echo 0; exit; } ;;

			*)           echo 2; exit;;

			esac

		done

		debug "PCI config value check ($opts): checked $checked," \

		      "matched $matched (model check is set to $match_model)"

		case "$mode" in

		success-any) if [ "$matched" -eq 0 ]; then echo 1; else echo 0; fi ;;

		success-all) if [ "$matched" -gt 0 -a "$matched" -eq "$checked" ]; then echo 0; else echo 1; fi ;;

		fail-any)    if [ "$matched" -eq 0 ]; then echo 0; else echo 1; fi  ;;

		fail-all)    if [ "$matched" -gt 0 -a "$matched" -eq "$checked" ]; then echo 1; else echo 0; fi ;;

		*)           echo 2; exit;;

		esac

	)

}

# It is needed for filtering by BIOS vendor name that is available in DMI data

#

# $1 - params in config file, space-separated, in key=value form:

#   key= - DMI value to check. Can be one of the following: bios_date,

#          bios_vendor, bios_version, board_asset_tag, board_name, board_serial,

#          board_vendor, board_version, chassis_asset_tag, chassis_serial,

#          chassis_type, chassis_vendor, chassis_version, product_family,

#          product_name, product_serial, product_uuid, product_version,

#          sys_vendor.

#   val= - a string to match DMI data against.  Can be enclosed in single

#          or double quotes.

#   mode=success-equal [ success-equal, fail-equal ] - matching mode:

#     success-equal: Returns 0 if the value present in the corresponding file

#                    under /sys/devices/virtual/dmi/id/<key> is equal

#                    to the value supplied as a value of "val" parameter,

#                    otherwise 1.

#     fail-equal:    Returns 1 if the value present in the corresponding file

#                    under /sys/devices/virtual/dmi/id/<key> is equal

#                    to the value supplied as a value of "val" parameter,

#                    otherwise 0.

#   no-model-mode=success [ success, fail ] - return value if model filter

#                                             is not enabled:

#     success: Return 0.

#     fail:    Return 1.

# $2 - whether model filter is engaged (if it is not '1', just return the result

#      based on "mode" value that assumes that the check has failed).

check_dmi_val()

{

	local key= val= mode='success-equal' nm_mode='success'

	local opts="${1:-}" opt= opt_=

	local match_model="${2:-0}"

	local valid_keys=" bios_date bios_vendor bios_version board_asset_tag board_name board_serial board_vendor board_version chassis_asset_tag chassis_serial chassis_type chassis_vendor chassis_version product_family product_name product_serial product_uuid product_version sys_vendor "

	local success=1

	while [ -n "$opts" ]; do

		opt="${opts%%[ 	]*}"

		[ -n "${opt}" ] || { opts="${opts#[ 	]}"; continue; }

		[ "x${opt#key=}" = "x${opt}" ] || key="${opt#key=}"

		[ "x${opt#mode=}" = "x${opt}" ] || mode="${opt#mode=}"

		[ "x${opt#no-model-mode=}" = "x${opt}" ] || \

			nm_mode="${opt#no-model-mode=}"

		# Handle possible quoting

		[ "x${opt#val=}" = "x${opt}" ] || {

			case "${opt#val=}" in

			[']*) opt_="${opts#val=\'}"; val="${opt_%%\'*}"; opt="val=\'${val}\'" ;;

			["]*) opt_="${opts#val=\"}"; val="${opt_%%\"*}"; opt="val=\"${val}\"" ;;

			*)    val="${opt#val=}" ;;

			esac

		}

		opts="${opts#"${opt}"}"

		continue

	done

	# Check key for validity

	[ "x${valid_keys#* ${key} *}" != "x${valid_keys}" ] || {

		debug "Invalid \"key\" parameter value: \"${key}\""

		echo 2

		exit

	}

	[ 1 = "$match_model" ] || {

		case "$nm_mode" in

		success) echo 0 ;;

		fail)    echo 1 ;;

		*)

			debug "Invalid no-model-mode value: \"${nm_mode}\""

			echo 2

			;;

		esac

		exit

	}

	[ -r "/sys/devices/virtual/dmi/id/${key}" ] || {

		debug "Can't access /sys/devices/virtual/dmi/id/${key}"

		echo 3

		exit

	}

	file_val="$(/bin/cat "/sys/devices/virtual/dmi/id/${key}")"

	[ "x${val}" = "x${file_val}" ] || success=0

	case "$mode" in

	success-equal) echo "$((1 - $success))" ;;

	fail-equal)    echo "${success}" ;;

	*)             debug "Invalid mode value: \"${nm_mode}\""; echo 2 ;;

	esac

}

# Provides model in format "VENDOR_ID FAMILY-MODEL-STEPPING"

#

# We check only the first processor as we don't expect non-symmetrical setups

# with CPUs with caveats

get_model_string()

{

	/usr/bin/printf "%s %02x-%02x-%02x" \

		$(/bin/sed -rn '1,/^$/{

			s/^vendor_id[[:space:]]*: (.*)$/\1/p;

			s/^cpu family[[:space:]]*: (.*)$/\1/p;

			s/^model[[:space:]]*: (.*)$/\1/p;

			s/^stepping[[:space:]]*: (.*)$/\1/p;

		}' /proc/cpuinfo)

}

get_model_name()

{

	/bin/sed -rn '1,/^$/s/^model name[[:space:]]*: (.*)$/\1/p' /proc/cpuinfo

}

get_vendor_id()

{

	/bin/sed -rn '1,/^$/s/^vendor_id[[:space:]]*: (.*)$/\1/p' /proc/cpuinfo

}

get_mc_path()

{

	case "$1" in

	GenuineIntel)

		echo "intel-ucode/$2"

		;;

	AuthenticAMD)

		echo "amd-ucode/$2"

		;;

	*)

		# We actually only support Intel ucode, but things may break

		# if nothing is printed (input would be gotten from stdin

		# otherwise).

		echo "invalid"

		;;

	esac

}

get_mc_ver()

{

	/bin/sed -rn '1,/^$/s/^microcode[[:space:]]*: (.*)$/\1/p' /proc/cpuinfo

}

# fail [CHECK_ONLY]

fail()

{

	check_only="${1:-0}"

	[ 0 = "$check_only" ] || return

	ret=1

	fail_cfgs="$fail_cfgs $cfg"

	fail_paths="$fail_paths $cfg_path"

	[ 0 -eq "$print_disclaimers" ] || [ ! -e "${dir}/disclaimer" ] \

		|| /bin/cat "${dir}/disclaimer"

}

#check_kver "$@"

#get_model_name

match_model=0

configs=

kver=$(/bin/uname -r)

verbose=0

early_check=0

print_disclaimers=0

ret=0

while getopts "dek:c:mv" opt; do

	case "${opt}" in

	d)

		print_disclaimers=1

		early_check=2

		;;

	e)

		early_check=1

		;;

	k)

		kver="$OPTARG"

		;;

	c)

		configs="$configs $OPTARG"

		;;

	m)

		match_model=1

		;;

	v)

		verbose=1

		;;

	*)

		usage

		exit 1;

		;;

	esac

done

: "${configs:=$(find "${MC_CAVEATS_DATA_DIR}" -maxdepth 1 -mindepth 1 -type d -printf "%f\n")}"

cpu_model=$(get_model_string)

cpu_model_name=$(get_model_name)

cpu_vendor=$(get_vendor_id)

ret_paths=""

ok_paths=""

fail_paths=""

ret_cfgs=""

ok_cfgs=""

fail_cfgs=""

skip_cfgs=""

if [ 1 -eq "$early_check" ]; then

	stage="early"

else

	stage="late"

fi

# check_caveat CFG [CHECK_ONLY]

# changes ret_paths, ok_paths, fail_paths, ret_cfgs, ok_cfgs, fail_cfgs,

# skip_cfgs if CHECK_ONLY is set to 0 (default).

# Return value:

#  0 - check is successful

#  1 - check has been failed

#  2 - configuration has been skipped

check_caveat() {

	local cfg="$1"

	local check_only="${2:-0}"

	local dir="$MC_CAVEATS_DATA_DIR/$cfg"

	# We add cfg to the skip list first and then, if we do not skip it,

	# we remove the configuration from the list.

	[ 0 != "$check_only" ] || skip_cfgs="$skip_cfgs $cfg"

	[ -r "${dir}/readme" ] || {

		debug "File 'readme' in ${dir} is not found, skipping"

		return 2

	}

	[ -r "${dir}/config" ] || {

		debug "File 'config' in ${dir} is not found, skipping"

		return 2

	}

	local cfg_model=

	local cfg_vendor=

	local cfg_path=

	local cfg_kvers=

	local cfg_kvers_early=

	local cfg_mc_min_ver_late=

	local cfg_disable=

	local cfg_pci=

	local cfg_dmi=

	local key

	local value

	while read -r key value; do

		case "$key" in

		model)

			cfg_model="$value"

			;;

		vendor)

			cfg_vendor="$value"

			;;

		path)

			cfg_path="$cfg_path $value"

			;;

		kernel)

			cfg_kvers="$cfg_kvers $value"

			;;

		kernel_early)

			cfg_kvers_early="$cfg_kvers_early $value"

			;;

		mc_min_ver_late)

			cfg_mc_min_ver_late="$value"

			;;

		disable)

			cfg_disable="$cfg_disable $value "

			;;

		pci_config_val)

			cfg_pci="$cfg_pci

				$value"

			;;

		dmi)

			cfg_dmi="$cfg_dmi

				$value"

			;;

		'#'*|'')

			continue

			;;

		*)

			debug "Unknown key '$key' (value '$value') in config" \

			      "'$cfg'"

			;;

		esac

	done < "${dir}/config"

	debug "${cfg}: model '$cfg_model', path '$cfg_path', kvers '$cfg_kvers'"

	# Check for override files in the following order:

	#  - disallow early/late specific caveat for specific kernel

	#  - force early/late specific caveat for specific kernel

	#  - disallow specific caveat for specific kernel

	#  - force specific caveat for specific kernel

	#

	#  - disallow early/late specific caveat for any kernel

	#  - disallow early/late any caveat for specific kernel

	#  - force early/late specific caveat for any kernel

	#  - force early/late any caveat for specific kernel

	#  - disallow specific caveat for any kernel

	#  - disallow any caveat for specific kernel

	#  - force specific caveat for any kernel

	#  - force any caveat for specific kernel

	#

	#  - disallow early/late everything

	#  - force early/late everyhting

	#  - disallow everything

	#  - force everyhting

	local ignore_cfg=0

	local force_cfg=0

	local override_file=""

	local overrides="

	0:$FW_DIR/$kver/disallow-$stage-$cfg

	1:$FW_DIR/$kver/force-$stage-$cfg

	0:$FW_DIR/$kver/disallow-$cfg

	1:$FW_DIR/$kver/force-$cfg

	0:$FW_DIR/$kver/disallow-$stage

	0:$CFG_DIR/disallow-$stage-$cfg

	1:$FW_DIR/$kver/force-$stage

	1:$CFG_DIR/force-$stage-$cfg

	0:$FW_DIR/$kver/disallow

	0:$CFG_DIR/disallow-$cfg

	1:$FW_DIR/$kver/force

	1:$CFG_DIR/force-$cfg

	0:$CFG_DIR/disallow-$stage

	1:$CFG_DIR/force-$stage

	0:$CFG_DIR/disallow

	1:$CFG_DIR/force"

	local o

	local o_force

	local override_file

	for o in $(echo "$overrides"); do

		o_force=${o%%:*}

		override_file=${o#$o_force:}

		[ -e "$override_file" ] || continue

		if [ 0 -eq "$o_force" ]; then

			ignore_cfg=1

		else

			force_cfg=1

		fi

		break

	done

	[ 0 -eq "$ignore_cfg" ] || {

		debug "Configuration \"$cfg\" is ignored due to presence of" \

		      "\"$override_file\"."

		return 2

	}

	# Check model if model filter is enabled

	if [ 1 -eq "$match_model" -a  -n "$cfg_model" ]; then

		[ "x$cpu_model" = "x$cfg_model" ] || {

			debug "Current CPU model '$cpu_model' doesn't" \

			      "match configuration CPU model '$cfg_model'," \

			      "skipping"

			return 2

		}

	fi

	# Check paths if model filter is enabled

	local cpu_mc_path

	local cfg_mc_present

	if [ 1 -eq "$match_model" -a  -n "$cfg_path" ]; then

		cpu_mc_path="$MC_CAVEATS_DATA_DIR/$cfg/$(get_mc_path \

			"$cpu_vendor" "${cpu_model#* }")"

		cfg_mc_present=0

		for p in $(printf "%s" "$cfg_path"); do

			/usr/bin/find "$MC_CAVEATS_DATA_DIR/$cfg" \

				-path "$MC_CAVEATS_DATA_DIR/$cfg/$p" -print0 \

			    | /bin/grep -zFxc "$cpu_mc_path" > /dev/null \

			    || continue

			cfg_mc_present=1

			break

		done

		[ 1 = "$cfg_mc_present" ] || {

			debug "No matching microcode files in '$cfg_path'" \

			      "for CPU model '$cpu_model', skipping"

			return 2

		}

	fi

	# Check vendor if model filter is enabled

	if [ 1 -eq "$match_model" -a  -n "$cfg_vendor" ]; then

		[ "x$cpu_vendor" = "x$cfg_vendor" ] || {

			debug "Current CPU vendor '$cpu_vendor' doesn't" \

			      "match configuration CPU vendor '$cfg_vendor'," \

			      "skipping"

			return 2

		}

	fi

	# Check configuration files

	[ 0 != "$check_only" ] || {

		ret_cfgs="$ret_cfgs $cfg"

		ret_paths="$ret_paths $cfg_path"

		skip_cfgs="${skip_cfgs% $cfg}"

	}

	[ 0 -eq "$force_cfg" ] || {

		debug "Checks for configuration \"$cfg\" are ignored due to" \

		      "presence of \"$override_file\"."

		[ 0 != "$check_only" ] || {

			ok_cfgs="$ok_cfgs $cfg"

			ok_paths="$ok_paths $cfg_path"

		}

		return 0

	}

	[ "x${cfg_disable%%* $stage *}" = "x$cfg_disable" ] || {

		debug "${cfg}: caveat is disabled in configuration"

		fail "$check_only"

		return 1

	}

	# Check late load kernel version

	if [ 1 -ne "$early_check" -a -n "$cfg_kvers" ]; then

		check_kver "$kver" $cfg_kvers || {

			debug "${cfg}: late load kernel version check for" \

			      " '$kver' against '$cfg_kvers' failed"

			fail "$check_only"

			return 1

		}

	fi

	# Check early load kernel version

	if [ 0 -ne "$early_check" -a -n "$cfg_kvers_early" ]; then

		check_kver "$kver" $cfg_kvers_early || {

			debug "${cfg}: early load kernel version check for" \

			      "'$kver' against '$cfg_kvers_early' failed"

			fail "$check_only"

			return 1

		}

	fi

	# Check current microcode version for the late update

	if [ -n "$cfg_mc_min_ver_late" -a 1 -ne "$early_check" -a \

	   "x$cpu_model" = "x$cfg_model" ]; then

		cpu_mc_ver="$(get_mc_ver)"