diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..88c376b --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +SOURCES/mdadm-4.1.tar.xz diff --git a/.mdadm.metadata b/.mdadm.metadata new file mode 100644 index 0000000..b2205ce --- /dev/null +++ b/.mdadm.metadata @@ -0,0 +1 @@ +4bbbd02674ac67dc9773f41aace7677aa5374c1c SOURCES/mdadm-4.1.tar.xz diff --git a/SOURCES/0001-Assemble-keep-MD_DISK_FAILFAST-and-MD_DISK_WRITEMOST.patch b/SOURCES/0001-Assemble-keep-MD_DISK_FAILFAST-and-MD_DISK_WRITEMOST.patch new file mode 100644 index 0000000..4d58d1c --- /dev/null +++ b/SOURCES/0001-Assemble-keep-MD_DISK_FAILFAST-and-MD_DISK_WRITEMOST.patch @@ -0,0 +1,39 @@ +From 0833f9c3dbaaee202b92ea956f9e2decc7b9593a Mon Sep 17 00:00:00 2001 +From: Gioh Kim +Date: Tue, 6 Nov 2018 15:27:42 +0100 +Subject: [RHEL7.7 PATCH 01/21] Assemble: keep MD_DISK_FAILFAST and + MD_DISK_WRITEMOSTLY flag + +Before updating superblock of slave disks, desired_state value +is set for the target state of the slave disks. But it forgets +to check MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY flags. Then +start_arrays() calls ADD_NEW_DISK ioctl-call and pass the state +without MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY. + +Currenlty it does not generate any problem because kernel does not +care MD_DISK_FAILFAST or MD_DISK_WRITEMOSTLY flags. + +Reviewed-by: NeilBrown +Signed-off-by: Gioh Kim +Signed-off-by: Jes Sorensen +--- + Assemble.c | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/Assemble.c b/Assemble.c +index a79466c..f39c9e1 100644 +--- a/Assemble.c ++++ b/Assemble.c +@@ -1704,6 +1704,9 @@ try_again: + else + desired_state = (1< +Date: Fri, 9 Nov 2018 17:12:33 +1100 +Subject: [RHEL7.7 PATCH 02/21] Document PART-POLICY lines + +PART-POLICY has been accepted in mdadm.conf since the same +time that POLICY was accepted, but it was never documented. +So add the missing documentation. + +Also fix a bug which would have stopped it from working if +anyone had ever tried to use it. + +Signed-off-by: NeilBrown +Signed-off-by: Jes Sorensen +--- + mdadm.conf.5 | 24 +++++++++++++++++++++++- + policy.c | 2 +- + 2 files changed, 24 insertions(+), 2 deletions(-) + +diff --git a/mdadm.conf.5 b/mdadm.conf.5 +index 18512cb..47c962a 100644 +--- a/mdadm.conf.5 ++++ b/mdadm.conf.5 +@@ -501,7 +501,7 @@ To update hot plug configuration it is necessary to execute + .B mdadm \-\-udev\-rules + command after changing the config file + +-Key words used in the ++Keywords used in the + .I POLICY + line and supported values are: + +@@ -565,6 +565,28 @@ be automatically added to that array (or it's container) + as above and the disk will become a spare in remaining cases + .RE + ++.TP ++.B PART-POLICY ++This is similar to ++.B POLICY ++and accepts the same keyword assignments. It allows a consistent set ++of policies to applied to each of the partitions of a device. ++ ++A ++.B PART-POLICY ++line should set ++.I type=disk ++and identify the path to one or more disk devices. Each partition on ++these disks will be treated according to the ++.I action= ++setting from this line. If a ++.I domain ++is set in the line, then the domain associated with each patition will ++be based on the domain, but with ++.RB \(dq -part N\(dq ++appended, when N is the partition number for the partition that was ++found. ++ + .SH EXAMPLE + DEVICE /dev/sd[bcdjkl]1 + .br +diff --git a/policy.c b/policy.c +index c0d18a7..258f393 100644 +--- a/policy.c ++++ b/policy.c +@@ -300,7 +300,7 @@ static int path_has_part(char *path, char **part) + l--; + if (l < 5 || strncmp(path+l-5, "-part", 5) != 0) + return 0; +- *part = path+l-4; ++ *part = path+l-5; + return 1; + } + +-- +2.7.5 + diff --git a/SOURCES/0003-policy-support-devices-with-multiple-paths.patch b/SOURCES/0003-policy-support-devices-with-multiple-paths.patch new file mode 100644 index 0000000..2521d28 --- /dev/null +++ b/SOURCES/0003-policy-support-devices-with-multiple-paths.patch @@ -0,0 +1,334 @@ +From cd72f9d114da206baa01fd56ff2d8ffcc08f3239 Mon Sep 17 00:00:00 2001 +From: NeilBrown +Date: Fri, 9 Nov 2018 17:12:33 +1100 +Subject: [RHEL7.7 PATCH 03/21] policy: support devices with multiple paths. + +As new releases of Linux some time change the name of +a path, some distros keep "legacy" names as well. This +is useful, but confuses mdadm which assumes each device has +precisely one path. + +So change this assumption: allow a disk to have several +paths, and allow any to match when looking for a policy +which matches a disk. + +Reported-and-tested-by: Mariusz Tkaczyk +Signed-off-by: NeilBrown +Signed-off-by: Jes Sorensen +--- + Incremental.c | 5 +- + mdadm.h | 2 +- + policy.c | 163 ++++++++++++++++++++++++++++++++-------------------------- + 3 files changed, 95 insertions(+), 75 deletions(-) + +diff --git a/Incremental.c b/Incremental.c +index a4ff7d4..d4d3c35 100644 +--- a/Incremental.c ++++ b/Incremental.c +@@ -1080,6 +1080,7 @@ static int partition_try_spare(char *devname, int *dfdp, struct dev_policy *pol, + struct supertype *st2 = NULL; + char *devname = NULL; + unsigned long long devsectors; ++ char *pathlist[2]; + + if (de->d_ino == 0 || de->d_name[0] == '.' || + (de->d_type != DT_LNK && de->d_type != DT_UNKNOWN)) +@@ -1094,7 +1095,9 @@ static int partition_try_spare(char *devname, int *dfdp, struct dev_policy *pol, + /* This is a partition - skip it */ + goto next; + +- pol2 = path_policy(de->d_name, type_disk); ++ pathlist[0] = de->d_name; ++ pathlist[1] = NULL; ++ pol2 = path_policy(pathlist, type_disk); + + domain_merge(&domlist, pol2, st ? st->ss->name : NULL); + if (domain_test(domlist, pol, st ? st->ss->name : NULL) != 1) +diff --git a/mdadm.h b/mdadm.h +index 387e681..705bd9b 100644 +--- a/mdadm.h ++++ b/mdadm.h +@@ -1247,7 +1247,7 @@ extern void policyline(char *line, char *type); + extern void policy_add(char *type, ...); + extern void policy_free(void); + +-extern struct dev_policy *path_policy(char *path, char *type); ++extern struct dev_policy *path_policy(char **paths, char *type); + extern struct dev_policy *disk_policy(struct mdinfo *disk); + extern struct dev_policy *devid_policy(int devid); + extern void dev_policy_free(struct dev_policy *p); +diff --git a/policy.c b/policy.c +index 258f393..fa67d55 100644 +--- a/policy.c ++++ b/policy.c +@@ -189,15 +189,17 @@ struct dev_policy *pol_find(struct dev_policy *pol, char *name) + return pol; + } + +-static char *disk_path(struct mdinfo *disk) ++static char **disk_paths(struct mdinfo *disk) + { + struct stat stb; + int prefix_len; + DIR *by_path; + char symlink[PATH_MAX] = "/dev/disk/by-path/"; +- char nm[PATH_MAX]; ++ char **paths; ++ int cnt = 0; + struct dirent *ent; +- int rv; ++ ++ paths = xmalloc(sizeof(*paths) * (cnt+1)); + + by_path = opendir(symlink); + if (by_path) { +@@ -214,22 +216,13 @@ static char *disk_path(struct mdinfo *disk) + continue; + if (stb.st_rdev != makedev(disk->disk.major, disk->disk.minor)) + continue; +- closedir(by_path); +- return xstrdup(ent->d_name); ++ paths[cnt++] = xstrdup(ent->d_name); ++ paths = xrealloc(paths, sizeof(*paths) * (cnt+1)); + } + closedir(by_path); + } +- /* A NULL path isn't really acceptable - use the devname.. */ +- sprintf(symlink, "/sys/dev/block/%d:%d", disk->disk.major, disk->disk.minor); +- rv = readlink(symlink, nm, sizeof(nm)-1); +- if (rv > 0) { +- char *dname; +- nm[rv] = 0; +- dname = strrchr(nm, '/'); +- if (dname) +- return xstrdup(dname + 1); +- } +- return xstrdup("unknown"); ++ paths[cnt] = NULL; ++ return paths; + } + + char type_part[] = "part"; +@@ -246,18 +239,53 @@ static char *disk_type(struct mdinfo *disk) + return type_disk; + } + +-static int pol_match(struct rule *rule, char *path, char *type) ++static int path_has_part(char *path, char **part) ++{ ++ /* check if path ends with "-partNN" and ++ * if it does, place a pointer to "-pathNN" ++ * in 'part'. ++ */ ++ int l; ++ if (!path) ++ return 0; ++ l = strlen(path); ++ while (l > 1 && isdigit(path[l-1])) ++ l--; ++ if (l < 5 || strncmp(path+l-5, "-part", 5) != 0) ++ return 0; ++ *part = path+l-5; ++ return 1; ++} ++ ++static int pol_match(struct rule *rule, char **paths, char *type, char **part) + { +- /* check if this rule matches on path and type */ ++ /* Check if this rule matches on any path and type. ++ * If 'part' is not NULL, then 'path' must end in -partN, which ++ * we ignore for matching, and return in *part on success. ++ */ + int pathok = 0; /* 0 == no path, 1 == match, -1 == no match yet */ + int typeok = 0; + +- while (rule) { ++ for (; rule; rule = rule->next) { + if (rule->name == rule_path) { ++ char *p; ++ int i; + if (pathok == 0) + pathok = -1; +- if (path && fnmatch(rule->value, path, 0) == 0) +- pathok = 1; ++ if (!paths) ++ continue; ++ for (i = 0; paths[i]; i++) { ++ if (part) { ++ if (!path_has_part(paths[i], &p)) ++ continue; ++ *p = '\0'; ++ *part = p+1; ++ } ++ if (fnmatch(rule->value, paths[i], 0) == 0) ++ pathok = 1; ++ if (part) ++ *p = '-'; ++ } + } + if (rule->name == rule_type) { + if (typeok == 0) +@@ -265,7 +293,6 @@ static int pol_match(struct rule *rule, char *path, char *type) + if (type && strcmp(rule->value, type) == 0) + typeok = 1; + } +- rule = rule->next; + } + return pathok >= 0 && typeok >= 0; + } +@@ -286,24 +313,6 @@ static void pol_merge(struct dev_policy **pol, struct rule *rule) + pol_new(pol, r->name, r->value, metadata); + } + +-static int path_has_part(char *path, char **part) +-{ +- /* check if path ends with "-partNN" and +- * if it does, place a pointer to "-pathNN" +- * in 'part'. +- */ +- int l; +- if (!path) +- return 0; +- l = strlen(path); +- while (l > 1 && isdigit(path[l-1])) +- l--; +- if (l < 5 || strncmp(path+l-5, "-part", 5) != 0) +- return 0; +- *part = path+l-5; +- return 1; +-} +- + static void pol_merge_part(struct dev_policy **pol, struct rule *rule, char *part) + { + /* copy any name assignments from rule into pol, appending +@@ -352,7 +361,7 @@ static int config_rules_has_path = 0; + * path_policy() gathers policy information for the + * disk described in the given a 'path' and a 'type'. + */ +-struct dev_policy *path_policy(char *path, char *type) ++struct dev_policy *path_policy(char **paths, char *type) + { + struct pol_rule *rules; + struct dev_policy *pol = NULL; +@@ -361,27 +370,24 @@ struct dev_policy *path_policy(char *path, char *type) + rules = config_rules; + + while (rules) { +- char *part; ++ char *part = NULL; + if (rules->type == rule_policy) +- if (pol_match(rules->rule, path, type)) ++ if (pol_match(rules->rule, paths, type, NULL)) + pol_merge(&pol, rules->rule); + if (rules->type == rule_part && strcmp(type, type_part) == 0) +- if (path_has_part(path, &part)) { +- *part = 0; +- if (pol_match(rules->rule, path, type_disk)) +- pol_merge_part(&pol, rules->rule, part+1); +- *part = '-'; +- } ++ if (pol_match(rules->rule, paths, type_disk, &part)) ++ pol_merge_part(&pol, rules->rule, part); + rules = rules->next; + } + + /* Now add any metadata-specific internal knowledge + * about this path + */ +- for (i=0; path && superlist[i]; i++) ++ for (i=0; paths[0] && superlist[i]; i++) + if (superlist[i]->get_disk_controller_domain) { + const char *d = +- superlist[i]->get_disk_controller_domain(path); ++ superlist[i]->get_disk_controller_domain( ++ paths[0]); + if (d) + pol_new(&pol, pol_domain, d, superlist[i]->name); + } +@@ -400,22 +406,34 @@ void pol_add(struct dev_policy **pol, + pol_dedup(*pol); + } + ++static void free_paths(char **paths) ++{ ++ int i; ++ ++ if (!paths) ++ return; ++ ++ for (i = 0; paths[i]; i++) ++ free(paths[i]); ++ free(paths); ++} ++ + /* + * disk_policy() gathers policy information for the + * disk described in the given mdinfo (disk.{major,minor}). + */ + struct dev_policy *disk_policy(struct mdinfo *disk) + { +- char *path = NULL; ++ char **paths = NULL; + char *type = disk_type(disk); + struct dev_policy *pol = NULL; + + if (config_rules_has_path) +- path = disk_path(disk); ++ paths = disk_paths(disk); + +- pol = path_policy(path, type); ++ pol = path_policy(paths, type); + +- free(path); ++ free_paths(paths); + return pol; + } + +@@ -756,27 +774,26 @@ int policy_check_path(struct mdinfo *disk, struct map_ent *array) + { + char path[PATH_MAX]; + FILE *f = NULL; +- char *id_path = disk_path(disk); +- int rv; ++ char **id_paths = disk_paths(disk); ++ int i; ++ int rv = 0; + +- if (!id_path) +- return 0; ++ for (i = 0; id_paths[i]; i++) { ++ snprintf(path, PATH_MAX, FAILED_SLOTS_DIR "/%s", id_paths[i]); ++ f = fopen(path, "r"); ++ if (!f) ++ continue; + +- snprintf(path, PATH_MAX, FAILED_SLOTS_DIR "/%s", id_path); +- f = fopen(path, "r"); +- if (!f) { +- free(id_path); +- return 0; ++ rv = fscanf(f, " %s %x:%x:%x:%x\n", ++ array->metadata, ++ array->uuid, ++ array->uuid+1, ++ array->uuid+2, ++ array->uuid+3); ++ fclose(f); ++ break; + } +- +- rv = fscanf(f, " %s %x:%x:%x:%x\n", +- array->metadata, +- array->uuid, +- array->uuid+1, +- array->uuid+2, +- array->uuid+3); +- fclose(f); +- free(id_path); ++ free_paths(id_paths); + return rv == 5; + } + +-- +2.7.5 + diff --git a/SOURCES/0004-mdcheck-add-systemd-unit-files-to-run-mdcheck.patch b/SOURCES/0004-mdcheck-add-systemd-unit-files-to-run-mdcheck.patch new file mode 100644 index 0000000..c0c25c1 --- /dev/null +++ b/SOURCES/0004-mdcheck-add-systemd-unit-files-to-run-mdcheck.patch @@ -0,0 +1,137 @@ +From 4199d3c629c14866505923d19fa50017ee92d2e1 Mon Sep 17 00:00:00 2001 +From: NeilBrown +Date: Wed, 5 Dec 2018 16:35:00 +1100 +Subject: [RHEL7.7 PATCH 04/21] mdcheck: add systemd unit files to run mdcheck. + +Having the mdcheck script is not use if is never run. +This patch adds systemd unit files so that it can easily +be run on the first Sunday of each month for 6 hours, +then on every subsequent morning until the check is +finished. + +The units still need to be enabled with + systemctl enable mdcheck_start.timer + +The timer will only actually be started when an array +which might need it becomes active. + +Signed-off-by: NeilBrown +Signed-off-by: Jes Sorensen +--- + Makefile | 5 ++++- + systemd/mdcheck_continue.service | 18 ++++++++++++++++++ + systemd/mdcheck_continue.timer | 13 +++++++++++++ + systemd/mdcheck_start.service | 17 +++++++++++++++++ + systemd/mdcheck_start.timer | 15 +++++++++++++++ + 5 files changed, 67 insertions(+), 1 deletion(-) + create mode 100644 systemd/mdcheck_continue.service + create mode 100644 systemd/mdcheck_continue.timer + create mode 100644 systemd/mdcheck_start.service + create mode 100644 systemd/mdcheck_start.timer + +diff --git a/Makefile b/Makefile +index 2767ac6..afb62cc 100644 +--- a/Makefile ++++ b/Makefile +@@ -276,7 +276,10 @@ install-udev: udev-md-raid-arrays.rules udev-md-raid-assembly.rules udev-md-raid + + install-systemd: systemd/mdmon@.service + @for file in mdmon@.service mdmonitor.service mdadm-last-resort@.timer \ +- mdadm-last-resort@.service mdadm-grow-continue@.service; \ ++ mdadm-last-resort@.service mdadm-grow-continue@.service \ ++ mdcheck_start.timer mdcheck_start.service \ ++ mdcheck_continue.timer mdcheck_continue.service \ ++ ; \ + do sed -e 's,BINDIR,$(BINDIR),g' systemd/$$file > .install.tmp.2 && \ + $(ECHO) $(INSTALL) -D -m 644 systemd/$$file $(DESTDIR)$(SYSTEMD_DIR)/$$file ; \ + $(INSTALL) -D -m 644 .install.tmp.2 $(DESTDIR)$(SYSTEMD_DIR)/$$file ; \ +diff --git a/systemd/mdcheck_continue.service b/systemd/mdcheck_continue.service +new file mode 100644 +index 0000000..592c607 +--- /dev/null ++++ b/systemd/mdcheck_continue.service +@@ -0,0 +1,18 @@ ++# This file is part of mdadm. ++# ++# mdadm is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++ ++[Unit] ++Description=MD array scrubbing - continuation ++ConditionPathExistsGlob = /var/lib/mdcheck/MD_UUID_* ++ ++[Service] ++Type=oneshot ++Environment= MDADM_CHECK_DURATION='"6 hours"' ++EnvironmentFile=-/run/sysconfig/mdadm ++ExecStartPre=-/usr/lib/mdadm/mdadm_env.sh ++ExecStart=/usr/share/mdadm/mdcheck --continue --duration $MDADM_CHECK_DURATION ++ +diff --git a/systemd/mdcheck_continue.timer b/systemd/mdcheck_continue.timer +new file mode 100644 +index 0000000..3ccfd78 +--- /dev/null ++++ b/systemd/mdcheck_continue.timer +@@ -0,0 +1,13 @@ ++# This file is part of mdadm. ++# ++# mdadm is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++ ++[Unit] ++Description=MD array scrubbing - continuation ++ ++[Timer] ++OnCalendar= 1:05:00 ++ +diff --git a/systemd/mdcheck_start.service b/systemd/mdcheck_start.service +new file mode 100644 +index 0000000..812141b +--- /dev/null ++++ b/systemd/mdcheck_start.service +@@ -0,0 +1,17 @@ ++# This file is part of mdadm. ++# ++# mdadm is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++ ++[Unit] ++Description=MD array scrubbing ++Wants=mdcheck_continue.timer ++ ++[Service] ++Type=oneshot ++Environment= MDADM_CHECK_DURATION='"6 hours"' ++EnvironmentFile=-/run/sysconfig/mdadm ++ExecStartPre=-/usr/lib/mdadm/mdadm_env.sh ++ExecStart=/usr/share/mdadm/mdcheck --duration $MDADM_CHECK_DURATION +diff --git a/systemd/mdcheck_start.timer b/systemd/mdcheck_start.timer +new file mode 100644 +index 0000000..6480736 +--- /dev/null ++++ b/systemd/mdcheck_start.timer +@@ -0,0 +1,15 @@ ++# This file is part of mdadm. ++# ++# mdadm is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++ ++[Unit] ++Description=MD array scrubbing ++ ++[Timer] ++OnCalendar=Sun *-*-1..7 1:00:00 ++ ++[Install] ++WantedBy= mdmonitor.service +-- +2.7.5 + diff --git a/SOURCES/0005-Monitor-add-system-timer-to-run-oneshot-periodically.patch b/SOURCES/0005-Monitor-add-system-timer-to-run-oneshot-periodically.patch new file mode 100644 index 0000000..1c0f6d3 --- /dev/null +++ b/SOURCES/0005-Monitor-add-system-timer-to-run-oneshot-periodically.patch @@ -0,0 +1,83 @@ +From 7cd7e91ab3de5aa75dc963cb08b0618c1885cf0d Mon Sep 17 00:00:00 2001 +From: NeilBrown +Date: Wed, 5 Dec 2018 16:35:00 +1100 +Subject: [RHEL7.7 PATCH 05/21] Monitor: add system timer to run --oneshot + periodically + +"mdadm --monitor --oneshot" can be used to get a warning +if there are any degraded arrays. It can be helpful to get +this warning periodically while the condition persists. + +This patch add a systemd service and timer which can +be enabled with + systemctl enable mdmonitor-oneshot.service + +and will then provide daily warnings. + +Signed-off-by: NeilBrown +Signed-off-by: Jes Sorensen +--- + Makefile | 1 + + systemd/mdmonitor-oneshot.service | 15 +++++++++++++++ + systemd/mdmonitor-oneshot.timer | 15 +++++++++++++++ + 3 files changed, 31 insertions(+) + create mode 100644 systemd/mdmonitor-oneshot.service + create mode 100644 systemd/mdmonitor-oneshot.timer + +diff --git a/Makefile b/Makefile +index afb62cc..dfe00b0 100644 +--- a/Makefile ++++ b/Makefile +@@ -279,6 +279,7 @@ install-systemd: systemd/mdmon@.service + mdadm-last-resort@.service mdadm-grow-continue@.service \ + mdcheck_start.timer mdcheck_start.service \ + mdcheck_continue.timer mdcheck_continue.service \ ++ mdmonitor-oneshot.timer mdmonitor-oneshot.service \ + ; \ + do sed -e 's,BINDIR,$(BINDIR),g' systemd/$$file > .install.tmp.2 && \ + $(ECHO) $(INSTALL) -D -m 644 systemd/$$file $(DESTDIR)$(SYSTEMD_DIR)/$$file ; \ +diff --git a/systemd/mdmonitor-oneshot.service b/systemd/mdmonitor-oneshot.service +new file mode 100644 +index 0000000..fd469b1 +--- /dev/null ++++ b/systemd/mdmonitor-oneshot.service +@@ -0,0 +1,15 @@ ++# This file is part of mdadm. ++# ++# mdadm is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++ ++[Unit] ++Description=Reminder for degraded MD arrays ++ ++[Service] ++Environment= MDADM_MONITOR_ARGS=--scan ++EnvironmentFile=-/run/sysconfig/mdadm ++ExecStartPre=-/usr/lib/mdadm/mdadm_env.sh ++ExecStart=BINDIR/mdadm --monitor --oneshot $MDADM_MONITOR_ARGS +diff --git a/systemd/mdmonitor-oneshot.timer b/systemd/mdmonitor-oneshot.timer +new file mode 100644 +index 0000000..cb54bda +--- /dev/null ++++ b/systemd/mdmonitor-oneshot.timer +@@ -0,0 +1,15 @@ ++# This file is part of mdadm. ++# ++# mdadm is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++ ++[Unit] ++Description=Reminder for degraded MD arrays ++ ++[Timer] ++OnCalendar= 2:00:00 ++ ++[Install] ++WantedBy= mdmonitor.service +-- +2.7.5 + diff --git a/SOURCES/0006-imsm-update-metadata-correctly-while-raid10-double-d.patch b/SOURCES/0006-imsm-update-metadata-correctly-while-raid10-double-d.patch new file mode 100644 index 0000000..d4fd840 --- /dev/null +++ b/SOURCES/0006-imsm-update-metadata-correctly-while-raid10-double-d.patch @@ -0,0 +1,83 @@ +From d7a1fda2769ba272d89de6caeab35d52b73a9c3c Mon Sep 17 00:00:00 2001 +From: Mariusz Tkaczyk +Date: Wed, 17 Oct 2018 12:11:41 +0200 +Subject: [RHEL7.7 PATCH 06/21] imsm: update metadata correctly while raid10 + double degradation + +Mdmon calls end_migration() when map state changes from normal to +degraded. It is not valid because in raid 10 double degradation case +mdmon breaks checkpointing but array is still rebuilding. +In this case mdmon has to mark map as degraded and continues marking +recovery checkpoint in metadata. Migration can be finished only if newly +failed device is a rebuilding device. + +Add catching double degraded to degraded transition. Migration is +finished but map state doesn't change, array is still degraded. + +Update failed_disk_num correctly. If double degradation +happens rebuild will start on the lowest slot, but this variable points +to the first failed slot. If second fail happens while rebuild this +variable shouldn't be updated until rebuild is not finished. + +Signed-off-by: Mariusz Tkaczyk +Signed-off-by: Jes Sorensen +--- + super-intel.c | 25 +++++++++++++++++++------ + 1 file changed, 19 insertions(+), 6 deletions(-) + +diff --git a/super-intel.c b/super-intel.c +index 6438987..d2035cc 100644 +--- a/super-intel.c ++++ b/super-intel.c +@@ -8136,7 +8136,8 @@ static int mark_failure(struct intel_super *super, + set_imsm_ord_tbl_ent(map2, slot2, + idx | IMSM_ORD_REBUILD); + } +- if (map->failed_disk_num == 0xff) ++ if (map->failed_disk_num == 0xff || ++ (!is_rebuilding(dev) && map->failed_disk_num > slot)) + map->failed_disk_num = slot; + + clear_disk_badblocks(super->bbm_log, ord_to_idx(ord)); +@@ -8558,13 +8559,25 @@ static void imsm_set_disk(struct active_array *a, int n, int state) + break; + } + if (is_rebuilding(dev)) { +- dprintf_cont("while rebuilding."); ++ dprintf_cont("while rebuilding "); + if (map->map_state != map_state) { +- dprintf_cont(" Map state change"); +- end_migration(dev, super, map_state); ++ dprintf_cont("map state change "); ++ if (n == map->failed_disk_num) { ++ dprintf_cont("end migration"); ++ end_migration(dev, super, map_state); ++ } else { ++ dprintf_cont("raid10 double degradation, map state change"); ++ map->map_state = map_state; ++ } + super->updates_pending++; +- } else if (!rebuild_done) { ++ } else if (!rebuild_done) + break; ++ else if (n == map->failed_disk_num) { ++ /* r10 double degraded to degraded transition */ ++ dprintf_cont("raid10 double degradation end migration"); ++ end_migration(dev, super, map_state); ++ a->last_checkpoint = 0; ++ super->updates_pending++; + } + + /* check if recovery is really finished */ +@@ -8575,7 +8588,7 @@ static void imsm_set_disk(struct active_array *a, int n, int state) + } + if (recovery_not_finished) { + dprintf_cont("\n"); +- dprintf("Rebuild has not finished yet, state not changed"); ++ dprintf_cont("Rebuild has not finished yet, map state changes only if raid10 double degradation happens"); + if (a->last_checkpoint < mdi->recovery_start) { + a->last_checkpoint = + mdi->recovery_start; +-- +2.7.5 + diff --git a/SOURCES/0007-Assemble-mask-FAILFAST-and-WRITEMOSTLY-flags-when-fi.patch b/SOURCES/0007-Assemble-mask-FAILFAST-and-WRITEMOSTLY-flags-when-fi.patch new file mode 100644 index 0000000..151bf02 --- /dev/null +++ b/SOURCES/0007-Assemble-mask-FAILFAST-and-WRITEMOSTLY-flags-when-fi.patch @@ -0,0 +1,43 @@ +From 563ac108659980b3d1e226fe416254a86656235f Mon Sep 17 00:00:00 2001 +From: Gioh Kim +Date: Tue, 6 Nov 2018 16:20:17 +0100 +Subject: [RHEL7.7 PATCH 07/21] Assemble: mask FAILFAST and WRITEMOSTLY flags + when finding the most recent device + +If devices[].i.disk.state has MD_DISK_FAILFAST or MD_DISK_WRITEMOSTLY +flag, it cannot be the most recent device. Both flags should be masked +before checking the state. + +Reviewed-by: NeilBrown +Signed-off-by: Gioh Kim +Signed-off-by: Jes Sorensen +--- + Assemble.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +diff --git a/Assemble.c b/Assemble.c +index f39c9e1..9f75c68 100644 +--- a/Assemble.c ++++ b/Assemble.c +@@ -578,6 +578,7 @@ static int load_devices(struct devs *devices, char *devmap, + struct supertype *tst; + int i; + int dfd; ++ int disk_state; + + if (tmpdev->used != 1) + continue; +@@ -711,7 +712,9 @@ static int load_devices(struct devs *devices, char *devmap, + devices[devcnt].i.disk.major = major(stb.st_rdev); + devices[devcnt].i.disk.minor = minor(stb.st_rdev); + +- if (devices[devcnt].i.disk.state == 6) { ++ disk_state = devices[devcnt].i.disk.state & ~((1< devices[most_recent].i.events) { +-- +2.7.5 + diff --git a/SOURCES/0008-Grow-avoid-overflow-in-compute_backup_blocks.patch b/SOURCES/0008-Grow-avoid-overflow-in-compute_backup_blocks.patch new file mode 100644 index 0000000..21e9cb4 --- /dev/null +++ b/SOURCES/0008-Grow-avoid-overflow-in-compute_backup_blocks.patch @@ -0,0 +1,34 @@ +From 085df42259cba7863cd6ebe5cd0d8492ac5b869e Mon Sep 17 00:00:00 2001 +From: NeilBrown +Date: Thu, 6 Dec 2018 10:35:41 +1100 +Subject: [RHEL7.7 PATCH 08/21] Grow: avoid overflow in compute_backup_blocks() + +With a chunk size of 16Meg and data drive count of 8, +this calculate can easily overflow the 'int' type that +is used for the multiplications. +So force it to use "long" instead. + +Reported-and-tested-by: Ed Spiridonov +Signed-off-by: NeilBrown +Signed-off-by: Jes Sorensen +--- + Grow.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Grow.c b/Grow.c +index 4436a4d..76f82c0 100644 +--- a/Grow.c ++++ b/Grow.c +@@ -1196,7 +1196,8 @@ unsigned long compute_backup_blocks(int nchunk, int ochunk, + /* Find GCD */ + a = GCD(a, b); + /* LCM == product / GCD */ +- blocks = (ochunk/512) * (nchunk/512) * odata * ndata / a; ++ blocks = (unsigned long)(ochunk/512) * (unsigned long)(nchunk/512) * ++ odata * ndata / a; + + return blocks; + } +-- +2.7.5 + diff --git a/SOURCES/0009-Grow-report-correct-new-chunk-size.patch b/SOURCES/0009-Grow-report-correct-new-chunk-size.patch new file mode 100644 index 0000000..9d05ee7 --- /dev/null +++ b/SOURCES/0009-Grow-report-correct-new-chunk-size.patch @@ -0,0 +1,30 @@ +From 76d505dec6c9f92564553596fc8350324be82463 Mon Sep 17 00:00:00 2001 +From: NeilBrown +Date: Thu, 6 Dec 2018 10:36:28 +1100 +Subject: [RHEL7.7 PATCH 09/21] Grow: report correct new chunk size. + +When using "--grow --chunk=" to change chunk +size, the old chunksize is reported instead of the new. + +Signed-off-by: NeilBrown +Signed-off-by: Jes Sorensen +--- + Grow.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/Grow.c b/Grow.c +index 76f82c0..363b209 100644 +--- a/Grow.c ++++ b/Grow.c +@@ -3286,7 +3286,7 @@ static int reshape_array(char *container, int fd, char *devname, + goto release; + } else if (verbose >= 0) + printf("chunk size for %s set to %d\n", +- devname, array.chunk_size); ++ devname, info->new_chunk); + } + unfreeze(st); + return 0; +-- +2.7.5 + diff --git a/SOURCES/0010-policy.c-prevent-NULL-pointer-referencing.patch b/SOURCES/0010-policy.c-prevent-NULL-pointer-referencing.patch new file mode 100644 index 0000000..5e17bfd --- /dev/null +++ b/SOURCES/0010-policy.c-prevent-NULL-pointer-referencing.patch @@ -0,0 +1,31 @@ +From 467e6a1b4ece8e552ee638dab7f44a4d235ece1a Mon Sep 17 00:00:00 2001 +From: Gioh Kim +Date: Fri, 7 Dec 2018 12:04:44 +0100 +Subject: [RHEL7.7 PATCH 10/21] policy.c: prevent NULL pointer referencing + +paths could be NULL and paths[0] should be followed by NULL pointer +checking. + +Reviewed-by: NeilBrown +Signed-off-by: Gioh Kim +Signed-off-by: Jes Sorensen +--- + policy.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/policy.c b/policy.c +index fa67d55..e3a0671 100644 +--- a/policy.c ++++ b/policy.c +@@ -383,7 +383,7 @@ struct dev_policy *path_policy(char **paths, char *type) + /* Now add any metadata-specific internal knowledge + * about this path + */ +- for (i=0; paths[0] && superlist[i]; i++) ++ for (i=0; paths && paths[0] && superlist[i]; i++) + if (superlist[i]->get_disk_controller_domain) { + const char *d = + superlist[i]->get_disk_controller_domain( +-- +2.7.5 + diff --git a/SOURCES/0011-policy.c-Fix-for-compiler-error.patch b/SOURCES/0011-policy.c-Fix-for-compiler-error.patch new file mode 100644 index 0000000..377f4b2 --- /dev/null +++ b/SOURCES/0011-policy.c-Fix-for-compiler-error.patch @@ -0,0 +1,36 @@ +From 757e55435997e355ee9b03e5d913b5496a3c39a8 Mon Sep 17 00:00:00 2001 +From: Mariusz Tkaczyk +Date: Tue, 11 Dec 2018 15:04:07 +0100 +Subject: [RHEL7.7 PATCH 11/21] policy.c: Fix for compiler error +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +After cd72f9d(policy: support devices with multiple paths.) compilation +on old compilers fails because "ā€˜pā€™ may be used uninitialized +in this function". + +Initialize it with NULL to prevent this. + +Signed-off-by: Mariusz Tkaczyk +Signed-off-by: Jes Sorensen +--- + policy.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/policy.c b/policy.c +index e3a0671..3c53bd3 100644 +--- a/policy.c ++++ b/policy.c +@@ -268,7 +268,7 @@ static int pol_match(struct rule *rule, char **paths, char *type, char **part) + + for (; rule; rule = rule->next) { + if (rule->name == rule_path) { +- char *p; ++ char *p = NULL; + int i; + if (pathok == 0) + pathok = -1; +-- +2.7.5 + diff --git a/SOURCES/0012-imsm-finish-recovery-when-drive-with-rebuild-fails.patch b/SOURCES/0012-imsm-finish-recovery-when-drive-with-rebuild-fails.patch new file mode 100644 index 0000000..aa770fa --- /dev/null +++ b/SOURCES/0012-imsm-finish-recovery-when-drive-with-rebuild-fails.patch @@ -0,0 +1,95 @@ +From a4e96fd8f3f0b5416783237c1cb6ee87e7eff23d Mon Sep 17 00:00:00 2001 +From: Mariusz Tkaczyk +Date: Fri, 8 Feb 2019 11:07:10 +0100 +Subject: [RHEL7.7 PATCH 12/21] imsm: finish recovery when drive with rebuild + fails + +Commit d7a1fda2769b ("imsm: update metadata correctly while raid10 double +degradation") resolves main Imsm double degradation problems but it +omits one case. Now metadata hangs in the rebuilding state if the drive +under rebuild is removed during recovery from double degradation. + +The root cause of this problem is comparing new map_state with current +and if they both are degraded assuming that nothing new happens. + +Don't rely on map states, just check if device is failed. If the drive +under rebuild fails then finish migration, in other cases update map +state only (second fail means that destination map state can't be normal). + +To avoid problems with reassembling move end_migration (called after +double degradation successful recovery) after check if recovery really +finished, for details see (7ce057018 "imsm: fix: rebuild does not +continue after reboot"). +Remove redundant code responsible for finishing rebuild process. Function +end_migration do exactly the same. Set last_checkpoint to 0, to prepare +it for the next rebuild. + +Signed-off-by: Mariusz Tkaczyk +Signed-off-by: Jes Sorensen +--- + super-intel.c | 26 +++++++++++--------------- + 1 file changed, 11 insertions(+), 15 deletions(-) + +diff --git a/super-intel.c b/super-intel.c +index d2035cc..38a1b6c 100644 +--- a/super-intel.c ++++ b/super-intel.c +@@ -8560,26 +8560,22 @@ static void imsm_set_disk(struct active_array *a, int n, int state) + } + if (is_rebuilding(dev)) { + dprintf_cont("while rebuilding "); +- if (map->map_state != map_state) { +- dprintf_cont("map state change "); ++ if (state & DS_FAULTY) { ++ dprintf_cont("removing failed drive "); + if (n == map->failed_disk_num) { + dprintf_cont("end migration"); + end_migration(dev, super, map_state); ++ a->last_checkpoint = 0; + } else { +- dprintf_cont("raid10 double degradation, map state change"); ++ dprintf_cont("fail detected during rebuild, changing map state"); + map->map_state = map_state; + } + super->updates_pending++; +- } else if (!rebuild_done) +- break; +- else if (n == map->failed_disk_num) { +- /* r10 double degraded to degraded transition */ +- dprintf_cont("raid10 double degradation end migration"); +- end_migration(dev, super, map_state); +- a->last_checkpoint = 0; +- super->updates_pending++; + } + ++ if (!rebuild_done) ++ break; ++ + /* check if recovery is really finished */ + for (mdi = a->info.devs; mdi ; mdi = mdi->next) + if (mdi->recovery_start != MaxSector) { +@@ -8588,7 +8584,7 @@ static void imsm_set_disk(struct active_array *a, int n, int state) + } + if (recovery_not_finished) { + dprintf_cont("\n"); +- dprintf_cont("Rebuild has not finished yet, map state changes only if raid10 double degradation happens"); ++ dprintf_cont("Rebuild has not finished yet"); + if (a->last_checkpoint < mdi->recovery_start) { + a->last_checkpoint = + mdi->recovery_start; +@@ -8598,9 +8594,9 @@ static void imsm_set_disk(struct active_array *a, int n, int state) + } + + dprintf_cont(" Rebuild done, still degraded"); +- dev->vol.migr_state = 0; +- set_migr_type(dev, 0); +- dev->vol.curr_migr_unit = 0; ++ end_migration(dev, super, map_state); ++ a->last_checkpoint = 0; ++ super->updates_pending++; + + for (i = 0; i < map->num_members; i++) { + int idx = get_imsm_ord_tbl_ent(dev, i, MAP_0); +-- +2.7.5 + diff --git a/SOURCES/0013-imsm-fix-reshape-for-2TB-drives.patch b/SOURCES/0013-imsm-fix-reshape-for-2TB-drives.patch new file mode 100644 index 0000000..264ce72 --- /dev/null +++ b/SOURCES/0013-imsm-fix-reshape-for-2TB-drives.patch @@ -0,0 +1,322 @@ +From 9f4218274cd4a1e1f356a1617f9a1d09960cf255 Mon Sep 17 00:00:00 2001 +From: Pawel Baldysiak +Date: Mon, 28 Jan 2019 17:10:41 +0100 +Subject: [RHEL7.7 PATCH 13/21] imsm: fix reshape for >2TB drives + +If reshape is performed on drives larger then 2 TB, +migration checkpoint area that is calculated exeeds 32-bit value. +This checkpoint area is a reserved space threated as backup +during reshape - at the end of the drive, right before metadata. +As a result - wrong space is used and the data that may exists there +is overwritten. + +Adding additional field to migration record to track high order 32-bits +of pba of this area. Three other fields that may exceed 32-bit value +for large drives are added as well. + +Signed-off-by: Pawel Baldysiak +Signed-off-by: Jes Sorensen +--- + super-intel.c | 149 +++++++++++++++++++++++++++++++++++++++++----------------- + 1 file changed, 107 insertions(+), 42 deletions(-) + +diff --git a/super-intel.c b/super-intel.c +index 38a1b6c..1cc7d5f 100644 +--- a/super-intel.c ++++ b/super-intel.c +@@ -296,7 +296,7 @@ struct migr_record { + __u32 rec_status; /* Status used to determine how to restart + * migration in case it aborts + * in some fashion */ +- __u32 curr_migr_unit; /* 0..numMigrUnits-1 */ ++ __u32 curr_migr_unit_lo; /* 0..numMigrUnits-1 */ + __u32 family_num; /* Family number of MPB + * containing the RaidDev + * that is migrating */ +@@ -306,16 +306,23 @@ struct migr_record { + __u32 dest_depth_per_unit; /* Num member blocks each destMap + * member disk + * advances per unit-of-operation */ +- __u32 ckpt_area_pba; /* Pba of first block of ckpt copy area */ +- __u32 dest_1st_member_lba; /* First member lba on first +- * stripe of destination */ +- __u32 num_migr_units; /* Total num migration units-of-op */ ++ __u32 ckpt_area_pba_lo; /* Pba of first block of ckpt copy area */ ++ __u32 dest_1st_member_lba_lo; /* First member lba on first ++ * stripe of destination */ ++ __u32 num_migr_units_lo; /* Total num migration units-of-op */ + __u32 post_migr_vol_cap; /* Size of volume after + * migration completes */ + __u32 post_migr_vol_cap_hi; /* Expansion space for LBA64 */ + __u32 ckpt_read_disk_num; /* Which member disk in destSubMap[0] the + * migration ckpt record was read from + * (for recovered migrations) */ ++ __u32 curr_migr_unit_hi; /* 0..numMigrUnits-1 high order 32 bits */ ++ __u32 ckpt_area_pba_hi; /* Pba of first block of ckpt copy area ++ * high order 32 bits */ ++ __u32 dest_1st_member_lba_hi; /* First member lba on first stripe of ++ * destination - high order 32 bits */ ++ __u32 num_migr_units_hi; /* Total num migration units-of-op ++ * high order 32 bits */ + } __attribute__ ((__packed__)); + + struct md_list { +@@ -1208,6 +1215,38 @@ static unsigned long long imsm_dev_size(struct imsm_dev *dev) + return join_u32(dev->size_low, dev->size_high); + } + ++static unsigned long long migr_chkp_area_pba(struct migr_record *migr_rec) ++{ ++ if (migr_rec == NULL) ++ return 0; ++ return join_u32(migr_rec->ckpt_area_pba_lo, ++ migr_rec->ckpt_area_pba_hi); ++} ++ ++static unsigned long long current_migr_unit(struct migr_record *migr_rec) ++{ ++ if (migr_rec == NULL) ++ return 0; ++ return join_u32(migr_rec->curr_migr_unit_lo, ++ migr_rec->curr_migr_unit_hi); ++} ++ ++static unsigned long long migr_dest_1st_member_lba(struct migr_record *migr_rec) ++{ ++ if (migr_rec == NULL) ++ return 0; ++ return join_u32(migr_rec->dest_1st_member_lba_lo, ++ migr_rec->dest_1st_member_lba_hi); ++} ++ ++static unsigned long long get_num_migr_units(struct migr_record *migr_rec) ++{ ++ if (migr_rec == NULL) ++ return 0; ++ return join_u32(migr_rec->num_migr_units_lo, ++ migr_rec->num_migr_units_hi); ++} ++ + static void set_total_blocks(struct imsm_disk *disk, unsigned long long n) + { + split_ull(n, &disk->total_blocks_lo, &disk->total_blocks_hi); +@@ -1233,6 +1272,33 @@ static void set_imsm_dev_size(struct imsm_dev *dev, unsigned long long n) + split_ull(n, &dev->size_low, &dev->size_high); + } + ++static void set_migr_chkp_area_pba(struct migr_record *migr_rec, ++ unsigned long long n) ++{ ++ split_ull(n, &migr_rec->ckpt_area_pba_lo, &migr_rec->ckpt_area_pba_hi); ++} ++ ++static void set_current_migr_unit(struct migr_record *migr_rec, ++ unsigned long long n) ++{ ++ split_ull(n, &migr_rec->curr_migr_unit_lo, ++ &migr_rec->curr_migr_unit_hi); ++} ++ ++static void set_migr_dest_1st_member_lba(struct migr_record *migr_rec, ++ unsigned long long n) ++{ ++ split_ull(n, &migr_rec->dest_1st_member_lba_lo, ++ &migr_rec->dest_1st_member_lba_hi); ++} ++ ++static void set_num_migr_units(struct migr_record *migr_rec, ++ unsigned long long n) ++{ ++ split_ull(n, &migr_rec->num_migr_units_lo, ++ &migr_rec->num_migr_units_hi); ++} ++ + static unsigned long long per_dev_array_size(struct imsm_map *map) + { + unsigned long long array_size = 0; +@@ -1629,12 +1695,14 @@ void convert_to_4k_imsm_migr_rec(struct intel_super *super) + struct migr_record *migr_rec = super->migr_rec; + + migr_rec->blocks_per_unit /= IMSM_4K_DIV; +- migr_rec->ckpt_area_pba /= IMSM_4K_DIV; +- migr_rec->dest_1st_member_lba /= IMSM_4K_DIV; + migr_rec->dest_depth_per_unit /= IMSM_4K_DIV; + split_ull((join_u32(migr_rec->post_migr_vol_cap, + migr_rec->post_migr_vol_cap_hi) / IMSM_4K_DIV), + &migr_rec->post_migr_vol_cap, &migr_rec->post_migr_vol_cap_hi); ++ set_migr_chkp_area_pba(migr_rec, ++ migr_chkp_area_pba(migr_rec) / IMSM_4K_DIV); ++ set_migr_dest_1st_member_lba(migr_rec, ++ migr_dest_1st_member_lba(migr_rec) / IMSM_4K_DIV); + } + + void convert_to_4k_imsm_disk(struct imsm_disk *disk) +@@ -1727,8 +1795,8 @@ void examine_migr_rec_imsm(struct intel_super *super) + printf("Normal\n"); + else + printf("Contains Data\n"); +- printf(" Current Unit : %u\n", +- __le32_to_cpu(migr_rec->curr_migr_unit)); ++ printf(" Current Unit : %llu\n", ++ current_migr_unit(migr_rec)); + printf(" Family : %u\n", + __le32_to_cpu(migr_rec->family_num)); + printf(" Ascending : %u\n", +@@ -1737,16 +1805,15 @@ void examine_migr_rec_imsm(struct intel_super *super) + __le32_to_cpu(migr_rec->blocks_per_unit)); + printf(" Dest. Depth Per Unit : %u\n", + __le32_to_cpu(migr_rec->dest_depth_per_unit)); +- printf(" Checkpoint Area pba : %u\n", +- __le32_to_cpu(migr_rec->ckpt_area_pba)); +- printf(" First member lba : %u\n", +- __le32_to_cpu(migr_rec->dest_1st_member_lba)); +- printf(" Total Number of Units : %u\n", +- __le32_to_cpu(migr_rec->num_migr_units)); +- printf(" Size of volume : %u\n", +- __le32_to_cpu(migr_rec->post_migr_vol_cap)); +- printf(" Expansion space for LBA64 : %u\n", +- __le32_to_cpu(migr_rec->post_migr_vol_cap_hi)); ++ printf(" Checkpoint Area pba : %llu\n", ++ migr_chkp_area_pba(migr_rec)); ++ printf(" First member lba : %llu\n", ++ migr_dest_1st_member_lba(migr_rec)); ++ printf(" Total Number of Units : %llu\n", ++ get_num_migr_units(migr_rec)); ++ printf(" Size of volume : %llu\n", ++ join_u32(migr_rec->post_migr_vol_cap, ++ migr_rec->post_migr_vol_cap_hi)); + printf(" Record was read from : %u\n", + __le32_to_cpu(migr_rec->ckpt_read_disk_num)); + +@@ -1759,13 +1826,15 @@ void convert_from_4k_imsm_migr_rec(struct intel_super *super) + struct migr_record *migr_rec = super->migr_rec; + + migr_rec->blocks_per_unit *= IMSM_4K_DIV; +- migr_rec->ckpt_area_pba *= IMSM_4K_DIV; +- migr_rec->dest_1st_member_lba *= IMSM_4K_DIV; + migr_rec->dest_depth_per_unit *= IMSM_4K_DIV; + split_ull((join_u32(migr_rec->post_migr_vol_cap, + migr_rec->post_migr_vol_cap_hi) * IMSM_4K_DIV), + &migr_rec->post_migr_vol_cap, + &migr_rec->post_migr_vol_cap_hi); ++ set_migr_chkp_area_pba(migr_rec, ++ migr_chkp_area_pba(migr_rec) * IMSM_4K_DIV); ++ set_migr_dest_1st_member_lba(migr_rec, ++ migr_dest_1st_member_lba(migr_rec) * IMSM_4K_DIV); + } + + void convert_from_4k(struct intel_super *super) +@@ -3096,7 +3165,7 @@ static int imsm_create_metadata_checkpoint_update( + return 0; + } + (*u)->type = update_general_migration_checkpoint; +- (*u)->curr_migr_unit = __le32_to_cpu(super->migr_rec->curr_migr_unit); ++ (*u)->curr_migr_unit = current_migr_unit(super->migr_rec); + dprintf("prepared for %u\n", (*u)->curr_migr_unit); + + return update_memory_size; +@@ -3397,13 +3466,13 @@ static void getinfo_super_imsm_volume(struct supertype *st, struct mdinfo *info, + case MIGR_GEN_MIGR: { + __u64 blocks_per_unit = blocks_per_migr_unit(super, + dev); +- __u64 units = __le32_to_cpu(migr_rec->curr_migr_unit); ++ __u64 units = current_migr_unit(migr_rec); + unsigned long long array_blocks; + int used_disks; + + if (__le32_to_cpu(migr_rec->ascending_migr) && + (units < +- (__le32_to_cpu(migr_rec->num_migr_units)-1)) && ++ (get_num_migr_units(migr_rec)-1)) && + (super->migr_rec->rec_status == + __cpu_to_le32(UNIT_SRC_IN_CP_AREA))) + units++; +@@ -10697,7 +10766,7 @@ void init_migr_record_imsm(struct supertype *st, struct imsm_dev *dev, + + if (array_blocks % __le32_to_cpu(migr_rec->blocks_per_unit)) + num_migr_units++; +- migr_rec->num_migr_units = __cpu_to_le32(num_migr_units); ++ set_num_migr_units(migr_rec, num_migr_units); + + migr_rec->post_migr_vol_cap = dev->size_low; + migr_rec->post_migr_vol_cap_hi = dev->size_high; +@@ -10714,7 +10783,7 @@ void init_migr_record_imsm(struct supertype *st, struct imsm_dev *dev, + min_dev_sectors = dev_sectors; + close(fd); + } +- migr_rec->ckpt_area_pba = __cpu_to_le32(min_dev_sectors - ++ set_migr_chkp_area_pba(migr_rec, min_dev_sectors - + RAID_DISK_RESERVED_BLOCKS_IMSM_HI); + + write_imsm_migr_rec(st); +@@ -10765,8 +10834,7 @@ int save_backup_imsm(struct supertype *st, + + start = info->reshape_progress * 512; + for (i = 0; i < new_disks; i++) { +- target_offsets[i] = (unsigned long long) +- __le32_to_cpu(super->migr_rec->ckpt_area_pba) * 512; ++ target_offsets[i] = migr_chkp_area_pba(super->migr_rec) * 512; + /* move back copy area adderss, it will be moved forward + * in restore_stripes() using start input variable + */ +@@ -10845,12 +10913,11 @@ int save_checkpoint_imsm(struct supertype *st, struct mdinfo *info, int state) + if (info->reshape_progress % blocks_per_unit) + curr_migr_unit++; + +- super->migr_rec->curr_migr_unit = +- __cpu_to_le32(curr_migr_unit); ++ set_current_migr_unit(super->migr_rec, curr_migr_unit); + super->migr_rec->rec_status = __cpu_to_le32(state); +- super->migr_rec->dest_1st_member_lba = +- __cpu_to_le32(curr_migr_unit * +- __le32_to_cpu(super->migr_rec->dest_depth_per_unit)); ++ set_migr_dest_1st_member_lba(super->migr_rec, ++ super->migr_rec->dest_depth_per_unit * curr_migr_unit); ++ + if (write_imsm_migr_rec(st) < 0) { + dprintf("imsm: Cannot write migration record outside backup area\n"); + return 1; +@@ -10884,8 +10951,8 @@ int recover_backup_imsm(struct supertype *st, struct mdinfo *info) + char *buf = NULL; + int retval = 1; + unsigned int sector_size = super->sector_size; +- unsigned long curr_migr_unit = __le32_to_cpu(migr_rec->curr_migr_unit); +- unsigned long num_migr_units = __le32_to_cpu(migr_rec->num_migr_units); ++ unsigned long curr_migr_unit = current_migr_unit(migr_rec); ++ unsigned long num_migr_units = get_num_migr_units(migr_rec); + char buffer[20]; + int skipped_disks = 0; + +@@ -10912,11 +10979,9 @@ int recover_backup_imsm(struct supertype *st, struct mdinfo *info) + map_dest = get_imsm_map(id->dev, MAP_0); + new_disks = map_dest->num_members; + +- read_offset = (unsigned long long) +- __le32_to_cpu(migr_rec->ckpt_area_pba) * 512; ++ read_offset = migr_chkp_area_pba(migr_rec) * 512; + +- write_offset = ((unsigned long long) +- __le32_to_cpu(migr_rec->dest_1st_member_lba) + ++ write_offset = (migr_dest_1st_member_lba(migr_rec) + + pba_of_lba0(map_dest)) * 512; + + unit_len = __le32_to_cpu(migr_rec->dest_depth_per_unit) * 512; +@@ -12019,12 +12084,12 @@ static int imsm_manage_reshape( + max_position = sra->component_size * ndata; + source_layout = imsm_level_to_layout(map_src->raid_level); + +- while (__le32_to_cpu(migr_rec->curr_migr_unit) < +- __le32_to_cpu(migr_rec->num_migr_units)) { ++ while (current_migr_unit(migr_rec) < ++ get_num_migr_units(migr_rec)) { + /* current reshape position [blocks] */ + unsigned long long current_position = + __le32_to_cpu(migr_rec->blocks_per_unit) +- * __le32_to_cpu(migr_rec->curr_migr_unit); ++ * current_migr_unit(migr_rec); + unsigned long long border; + + /* Check that array hasn't become failed. +-- +2.7.5 + diff --git a/SOURCES/0014-Fix-spelling-typos.patch b/SOURCES/0014-Fix-spelling-typos.patch new file mode 100644 index 0000000..e9b8a17 --- /dev/null +++ b/SOURCES/0014-Fix-spelling-typos.patch @@ -0,0 +1,101 @@ +From ebf3be9931f31df54df52b1821479e6a80a4d9c6 Mon Sep 17 00:00:00 2001 +From: Dimitri John Ledkov +Date: Tue, 15 Jan 2019 19:08:37 +0000 +Subject: [RHEL7.7 PATCH 14/21] Fix spelling typos. + +Signed-off-by: Dimitri John Ledkov +Signed-off-by: Jes Sorensen +--- + Assemble.c | 2 +- + Create.c | 2 +- + Grow.c | 6 +++--- + super-ddf.c | 2 +- + super-intel.c | 2 +- + 5 files changed, 7 insertions(+), 7 deletions(-) + +diff --git a/Assemble.c b/Assemble.c +index 9f75c68..9f050c1 100644 +--- a/Assemble.c ++++ b/Assemble.c +@@ -879,7 +879,7 @@ static int force_array(struct mdinfo *content, + current_events = devices[chosen_drive].i.events; + add_another: + if (c->verbose >= 0) +- pr_err("forcing event count in %s(%d) from %d upto %d\n", ++ pr_err("forcing event count in %s(%d) from %d up to %d\n", + devices[chosen_drive].devname, + devices[chosen_drive].i.disk.raid_disk, + (int)(devices[chosen_drive].i.events), +diff --git a/Create.c b/Create.c +index 04b1dfc..6f1b228 100644 +--- a/Create.c ++++ b/Create.c +@@ -823,7 +823,7 @@ int Create(struct supertype *st, char *mddev, + } + bitmap_fd = open(s->bitmap_file, O_RDWR); + if (bitmap_fd < 0) { +- pr_err("weird: %s cannot be openned\n", ++ pr_err("weird: %s cannot be opened\n", + s->bitmap_file); + goto abort_locked; + } +diff --git a/Grow.c b/Grow.c +index 363b209..6d32661 100644 +--- a/Grow.c ++++ b/Grow.c +@@ -446,7 +446,7 @@ int Grow_addbitmap(char *devname, int fd, struct context *c, struct shape *s) + if (offset_setable) { + st->ss->getinfo_super(st, mdi, NULL); + if (sysfs_init(mdi, fd, NULL)) { +- pr_err("failed to intialize sysfs.\n"); ++ pr_err("failed to initialize sysfs.\n"); + free(mdi); + } + rv = sysfs_set_num_signed(mdi, NULL, "bitmap/location", +@@ -2178,7 +2178,7 @@ size_change_error: + memset(&info, 0, sizeof(info)); + info.array = array; + if (sysfs_init(&info, fd, NULL)) { +- pr_err("failed to intialize sysfs.\n"); ++ pr_err("failed to initialize sysfs.\n"); + rv = 1; + goto release; + } +@@ -2903,7 +2903,7 @@ static int impose_level(int fd, int level, char *devname, int verbose) + struct mdinfo info; + + if (sysfs_init(&info, fd, NULL)) { +- pr_err("failed to intialize sysfs.\n"); ++ pr_err("failed to initialize sysfs.\n"); + return 1; + } + +diff --git a/super-ddf.c b/super-ddf.c +index 618542c..c095e8a 100644 +--- a/super-ddf.c ++++ b/super-ddf.c +@@ -1900,7 +1900,7 @@ static struct vd_config *find_vdcr(struct ddf_super *ddf, unsigned int inst, + return conf; + } + bad: +- pr_err("Could't find disk %d in array %u\n", n, inst); ++ pr_err("Couldn't find disk %d in array %u\n", n, inst); + return NULL; + } + +diff --git a/super-intel.c b/super-intel.c +index 1cc7d5f..c399433 100644 +--- a/super-intel.c ++++ b/super-intel.c +@@ -10034,7 +10034,7 @@ static void imsm_process_update(struct supertype *st, + break; + } + default: +- pr_err("error: unsuported process update type:(type: %d)\n", type); ++ pr_err("error: unsupported process update type:(type: %d)\n", type); + } + } + +-- +2.7.5 + diff --git a/SOURCES/0015-Detail.c-do-not-skip-first-character-when-calling-xs.patch b/SOURCES/0015-Detail.c-do-not-skip-first-character-when-calling-xs.patch new file mode 100644 index 0000000..23b6e60 --- /dev/null +++ b/SOURCES/0015-Detail.c-do-not-skip-first-character-when-calling-xs.patch @@ -0,0 +1,46 @@ +From e3615ecb5b6ad8eb408296878aad5628e0e27166 Mon Sep 17 00:00:00 2001 +From: Coly Li +Date: Tue, 12 Feb 2019 12:53:18 +0800 +Subject: [RHEL7.7 PATCH 15/21] Detail.c: do not skip first character when + calling xstrdup in Detail() + +'Commit b9c9bd9bacaa ("Detail: ensure --export names are acceptable as +shell variables")' duplicates mdi->sys_name to sysdev string by, + char *sysdev = xstrdup(mdi->sys_name + 1); +which skips the first character of mdi->sys_name. Then when running +mdadm --detail --export, the output looks like, + MD_DEVICE_ev_sda2_ROLE=1 + MD_DEVICE_ev_sda2_DEV=/dev/sda2 +The first character of md device (between MD_DEVICE and _ROLE/_DEV) +is dropped. The expected output should be, + MD_DEVICE_dev_sda2_ROLE=1 + MD_DEVICE_dev_sda2_DEV=/dev/sda2 + +This patch removes the '+ 1' from calling xstrdup() in Detail(), which +gets the dropped first character back. + +Reported-by: Arvin Schnell +Fixes: b9c9bd9bacaa ("Detail: ensure --export names are acceptable as 4 shell variables") +Signed-off-by: Coly Li +Cc: NeilBrown +Signed-off-by: Jes Sorensen +--- + Detail.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/Detail.c b/Detail.c +index b3e857a..20ea03a 100644 +--- a/Detail.c ++++ b/Detail.c +@@ -284,7 +284,7 @@ int Detail(char *dev, struct context *c) + struct mdinfo *mdi; + for (mdi = sra->devs; mdi; mdi = mdi->next) { + char *path; +- char *sysdev = xstrdup(mdi->sys_name + 1); ++ char *sysdev = xstrdup(mdi->sys_name); + char *cp; + + path = map_dev(mdi->disk.major, +-- +2.7.5 + diff --git a/SOURCES/0016-Fix-reshape-for-decreasing-data-offset.patch b/SOURCES/0016-Fix-reshape-for-decreasing-data-offset.patch new file mode 100644 index 0000000..b6c064d --- /dev/null +++ b/SOURCES/0016-Fix-reshape-for-decreasing-data-offset.patch @@ -0,0 +1,70 @@ +From cab114c5ca870e5f1b57fb2602cd9a038271c2e0 Mon Sep 17 00:00:00 2001 +From: Corey Hickey +Date: Mon, 11 Feb 2019 17:18:38 -0800 +Subject: [RHEL7.7 PATCH 16/21] Fix reshape for decreasing data offset + +...when not changing the number of disks. + +This patch needs context to explain. These are the relevant parts of +the original code (condensed and annotated): + +if (dir > 0) { + /* Increase data offset (reshape backwards) */ + if (data_offset < sd->data_offset + min) { + pr_err("--data-offset too small on %s\n", + dn); + goto release; + } +} else { + /* Decrease data offset (reshape forwards) */ + if (data_offset < sd->data_offset - min) { + pr_err("--data-offset too small on %s\n", + dn); + goto release; + } +} + +When this code is reached, mdadm has already decided on a reshape +direction. When increasing the data offset, the reshape runs backwards +(dir==1); when decreasing the data offset, the reshape runs forwards +(dir==-1). + +The conditional within the backwards reshape is correct: the requested +offset must be larger than the old offset plus a minimum delta; thus the +reshape has room to work. + +For the forwards reshape, the requested offset needs to be smaller than +the old offset minus a minimum delta; to do this correctly, the +comparison must be reversed. + +Also update the error message. + +Note: I have tested this change on a RAID 5 on Linux 4.18.0 and verified +that there were no errors from the kernel and that the device data +remained intact. I do not know if there are considerations for different +RAID levels. + +Signed-off-by: Corey Hickey +Signed-off-by: Jes Sorensen +--- + Grow.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/Grow.c b/Grow.c +index 6d32661..764374f 100644 +--- a/Grow.c ++++ b/Grow.c +@@ -2613,8 +2613,8 @@ static int set_new_data_offset(struct mdinfo *sra, struct supertype *st, + goto release; + } + if (data_offset != INVALID_SECTORS && +- data_offset < sd->data_offset - min) { +- pr_err("--data-offset too small on %s\n", ++ data_offset > sd->data_offset - min) { ++ pr_err("--data-offset too large on %s\n", + dn); + goto release; + } +-- +2.7.5 + diff --git a/SOURCES/0017-mdadm-tests-add-one-test-case-for-failfast-of-raid1.patch b/SOURCES/0017-mdadm-tests-add-one-test-case-for-failfast-of-raid1.patch new file mode 100644 index 0000000..ffdc433 --- /dev/null +++ b/SOURCES/0017-mdadm-tests-add-one-test-case-for-failfast-of-raid1.patch @@ -0,0 +1,100 @@ +From 76b906d2406cdf136f64de77e881eb2d180108d9 Mon Sep 17 00:00:00 2001 +From: Gioh Kim +Date: Fri, 7 Dec 2018 14:30:09 +0100 +Subject: [RHEL7.7 PATCH 17/21] mdadm/tests: add one test case for failfast of + raid1 + +This creates raid1 device with the failfast option and check all +slaves have the failfast flag. And it does assembling and growing +the raid1 device and check the failfast works fine. + +Signed-off-by: Gioh Kim +Signed-off-by: Jes Sorensen +--- + tests/05r1-failfast | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 74 insertions(+) + create mode 100644 tests/05r1-failfast + +diff --git a/tests/05r1-failfast b/tests/05r1-failfast +new file mode 100644 +index 0000000..823dd6f +--- /dev/null ++++ b/tests/05r1-failfast +@@ -0,0 +1,74 @@ ++ ++# create a simple mirror and check failfast flag works ++mdadm -CR $md0 -e1.2 --level=raid1 --failfast -n2 $dev0 $dev1 ++check raid1 ++if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null ++then ++ die "failfast missing" ++fi ++ ++# Removing works with the failfast flag ++mdadm $md0 -f $dev0 ++mdadm $md0 -r $dev0 ++if grep -v failfast /sys/block/md0/md/rd1/state > /dev/null ++then ++ die "failfast missing" ++fi ++ ++# Adding works with the failfast flag ++mdadm $md0 -a --failfast $dev0 ++check wait ++if grep -v failfast /sys/block/md0/md/rd0/state > /dev/null ++then ++ die "failfast missing" ++fi ++ ++mdadm -S $md0 ++ ++# Assembling works with the failfast flag ++mdadm -A $md0 $dev0 $dev1 ++check raid1 ++if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null ++then ++ die "failfast missing" ++fi ++ ++# Adding works with the nofailfast flag ++mdadm $md0 -f $dev0 ++mdadm $md0 -r $dev0 ++mdadm $md0 -a --nofailfast $dev0 ++check wait ++if grep failfast /sys/block/md0/md/rd0/state > /dev/null ++then ++ die "failfast should be missing" ++fi ++ ++# Assembling with one faulty slave works with the failfast flag ++mdadm $md0 -f $dev0 ++mdadm $md0 -r $dev0 ++mdadm -S $md0 ++mdadm -A $md0 $dev0 $dev1 ++check raid1 ++mdadm -S $md0 ++ ++# Spare works with the failfast flag ++mdadm -CR $md0 -e1.2 --level=raid1 --failfast -n2 $dev0 $dev1 ++check raid1 ++mdadm $md0 -a --failfast $dev2 ++check wait ++check spares 1 ++if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null ++then ++ die "failfast missing" ++fi ++ ++# Grow works with the failfast flag ++mdadm -G $md0 --raid-devices=3 ++check wait ++if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null ++then ++ die "failfast missing" ++fi ++mdadm -S $md0 ++ ++exit 0 +-- +2.7.5 + diff --git a/SOURCES/0018-mdmon-don-t-attempt-to-manage-new-arrays-when-termin.patch b/SOURCES/0018-mdmon-don-t-attempt-to-manage-new-arrays-when-termin.patch new file mode 100644 index 0000000..f291302 --- /dev/null +++ b/SOURCES/0018-mdmon-don-t-attempt-to-manage-new-arrays-when-termin.patch @@ -0,0 +1,50 @@ +From 69d084784de196acec8ab703cd1b379af211d624 Mon Sep 17 00:00:00 2001 +From: Artur Paszkiewicz +Date: Fri, 22 Feb 2019 10:15:45 +0100 +Subject: [RHEL7.7 PATCH 18/21] mdmon: don't attempt to manage new arrays when + terminating + +When mdmon gets a SIGTERM, it stops managing arrays that are clean. If +there is more that one array in the container and one of them is dirty +and the clean one is still present in mdstat, mdmon will treat it as a +new array and start managing it again. This leads to a cycle of +remove_old() / manage_new() calls for the clean array, until the other +one also becomes clean. + +Prevent this by not calling manage_new() if sigterm is set. Also, remove +a check for sigterm in manage_new() because the condition will never be +true. + +Signed-off-by: Artur Paszkiewicz +Signed-off-by: Jes Sorensen +--- + managemon.c | 6 ++---- + 1 file changed, 2 insertions(+), 4 deletions(-) + +diff --git a/managemon.c b/managemon.c +index 101231c..29b91ba 100644 +--- a/managemon.c ++++ b/managemon.c +@@ -727,9 +727,7 @@ static void manage_new(struct mdstat_ent *mdstat, + dprintf("inst: %s action: %d state: %d\n", inst, + new->action_fd, new->info.state_fd); + +- if (sigterm) +- new->info.safe_mode_delay = 1; +- else if (mdi->safe_mode_delay >= 50) ++ if (mdi->safe_mode_delay >= 50) + /* Normal start, mdadm set this. */ + new->info.safe_mode_delay = mdi->safe_mode_delay; + else +@@ -803,7 +801,7 @@ void manage(struct mdstat_ent *mdstat, struct supertype *container) + break; + } + } +- if (a == NULL || !a->container) ++ if ((a == NULL || !a->container) && !sigterm) + manage_new(mdstat, container, a); + } + } +-- +2.7.5 + diff --git a/SOURCES/0019-mdmon-wait-for-previous-mdmon-to-exit-during-takeove.patch b/SOURCES/0019-mdmon-wait-for-previous-mdmon-to-exit-during-takeove.patch new file mode 100644 index 0000000..d494ad9 --- /dev/null +++ b/SOURCES/0019-mdmon-wait-for-previous-mdmon-to-exit-during-takeove.patch @@ -0,0 +1,58 @@ +From d2e11da4b7fd0453e942f43e4196dc63b3dbd708 Mon Sep 17 00:00:00 2001 +From: Pawel Baldysiak +Date: Fri, 22 Feb 2019 13:30:27 +0100 +Subject: [RHEL7.7 PATCH 19/21] mdmon: wait for previous mdmon to exit during + takeover + +Since the patch c76242c5("mdmon: get safe mode delay file descriptor +early"), safe_mode_dalay is set properly by initrd mdmon. But in some +cases with filesystem traffic since the very start of the system, it +might take a while to transit to clean state. Due to fact that new +mdmon does not wait for the old one to exit - it might happen that the +new one switches safe_mode_delay back to seconds, before old one exits. +As the result two mdmons are running concurrently on same array. + +Wait for the old mdmon to exit by pinging it with SIGUSR1 signal, just +in case it is sleeping. + +Signed-off-by: Pawel Baldysiak +Signed-off-by: Jes Sorensen +--- + mdmon.c | 14 +++++++++++--- + 1 file changed, 11 insertions(+), 3 deletions(-) + +diff --git a/mdmon.c b/mdmon.c +index 0955fcc..ff985d2 100644 +--- a/mdmon.c ++++ b/mdmon.c +@@ -171,6 +171,7 @@ static void try_kill_monitor(pid_t pid, char *devname, int sock) + int fd; + int n; + long fl; ++ int rv; + + /* first rule of survival... don't off yourself */ + if (pid == getpid()) +@@ -201,9 +202,16 @@ static void try_kill_monitor(pid_t pid, char *devname, int sock) + fl &= ~O_NONBLOCK; + fcntl(sock, F_SETFL, fl); + n = read(sock, buf, 100); +- /* Ignore result, it is just the wait that +- * matters +- */ ++ ++ /* If there is I/O going on it might took some time to get to ++ * clean state. Wait for monitor to exit fully to avoid races. ++ * Ping it with SIGUSR1 in case that it is sleeping */ ++ for (n = 0; n < 25; n++) { ++ rv = kill(pid, SIGUSR1); ++ if (rv < 0) ++ break; ++ usleep(200000); ++ } + } + + void remove_pidfile(char *devname) +-- +2.7.5 + diff --git a/SOURCES/0020-Assemble-Fix-starting-array-with-initial-reshape-che.patch b/SOURCES/0020-Assemble-Fix-starting-array-with-initial-reshape-che.patch new file mode 100644 index 0000000..9fb2899 --- /dev/null +++ b/SOURCES/0020-Assemble-Fix-starting-array-with-initial-reshape-che.patch @@ -0,0 +1,52 @@ +From 2b57e4fe041d52ae29866c93a878a11c07223cff Mon Sep 17 00:00:00 2001 +From: Pawel Baldysiak +Date: Fri, 22 Feb 2019 12:56:27 +0100 +Subject: [RHEL7.7 PATCH 20/21] Assemble: Fix starting array with initial + reshape checkpoint + +If array was stopped during reshape initialization, +there might be a "0" checkpoint recorded in metadata. +If array with such condition (reshape with position 0) +is passed to kernel - it will refuse to start such array. + +Treat such array as normal during assemble, Grow_continue() will +reinitialize and start the reshape. + +Signed-off-by: Pawel Baldysiak +Signed-off-by: Jes Sorensen +--- + Assemble.c | 18 ++++++++++++++++-- + 1 file changed, 16 insertions(+), 2 deletions(-) + +diff --git a/Assemble.c b/Assemble.c +index 9f050c1..420c7b3 100644 +--- a/Assemble.c ++++ b/Assemble.c +@@ -2061,8 +2061,22 @@ int assemble_container_content(struct supertype *st, int mdfd, + spare, &c->backup_file, c->verbose) == 1) + return 1; + +- err = sysfs_set_str(content, NULL, +- "array_state", "readonly"); ++ if (content->reshape_progress == 0) { ++ /* If reshape progress is 0 - we are assembling the ++ * array that was stopped, before reshape has started. ++ * Array needs to be started as active, Grow_continue() ++ * will start the reshape. ++ */ ++ sysfs_set_num(content, NULL, "reshape_position", ++ MaxSector); ++ err = sysfs_set_str(content, NULL, ++ "array_state", "active"); ++ sysfs_set_num(content, NULL, "reshape_position", 0); ++ } else { ++ err = sysfs_set_str(content, NULL, ++ "array_state", "readonly"); ++ } ++ + if (err) + return 1; + +-- +2.7.5 + diff --git a/SOURCES/0021-add-missing-units-to-examine.patch b/SOURCES/0021-add-missing-units-to-examine.patch new file mode 100644 index 0000000..31d34f5 --- /dev/null +++ b/SOURCES/0021-add-missing-units-to-examine.patch @@ -0,0 +1,59 @@ +From 227aeaa872d4898273cf87a4253898823d556c43 Mon Sep 17 00:00:00 2001 +From: Corey Hickey +Date: Mon, 11 Feb 2019 17:42:27 -0800 +Subject: [RHEL7.7 PATCH 21/21] add missing units to --examine + +Within the output of "mdadm --examine", there are three sizes reported +on adjacent lines. For example: + +$ sudo mdadm --examine /dev/md3 +[...] + Avail Dev Size : 17580545024 (8383.06 GiB 9001.24 GB) + Array Size : 17580417024 (16765.99 GiB 18002.35 GB) + Used Dev Size : 11720278016 (5588.66 GiB 6000.78 GB) +[...] + +This can be confusing, since the first and third line are in 512-byte +sectors, and the second is in KiB. + +Add units to avoid ambiguity. + +(I don't particularly like the "KiB" notation, but it is at least +unambiguous.) + +Signed-off-by: Corey Hickey +Signed-off-by: Jes Sorensen +--- + super1.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/super1.c b/super1.c +index 636a286..b85dc20 100644 +--- a/super1.c ++++ b/super1.c +@@ -360,7 +360,7 @@ static void examine_super1(struct supertype *st, char *homehost) + printf(" Raid Level : %s\n", c?c:"-unknown-"); + printf(" Raid Devices : %d\n", __le32_to_cpu(sb->raid_disks)); + printf("\n"); +- printf(" Avail Dev Size : %llu%s\n", ++ printf(" Avail Dev Size : %llu sectors%s\n", + (unsigned long long)__le64_to_cpu(sb->data_size), + human_size(__le64_to_cpu(sb->data_size)<<9)); + if (__le32_to_cpu(sb->level) > 0) { +@@ -378,11 +378,11 @@ static void examine_super1(struct supertype *st, char *homehost) + if (ddsks) { + long long asize = __le64_to_cpu(sb->size); + asize = (asize << 9) * ddsks / ddsks_denom; +- printf(" Array Size : %llu%s\n", ++ printf(" Array Size : %llu KiB%s\n", + asize >> 10, human_size(asize)); + } + if (sb->size != sb->data_size) +- printf(" Used Dev Size : %llu%s\n", ++ printf(" Used Dev Size : %llu sectors%s\n", + (unsigned long long)__le64_to_cpu(sb->size), + human_size(__le64_to_cpu(sb->size)<<9)); + } +-- +2.7.5 + diff --git a/SOURCES/mdadm-2.5.2-static.patch b/SOURCES/mdadm-2.5.2-static.patch new file mode 100644 index 0000000..1eb335a --- /dev/null +++ b/SOURCES/mdadm-2.5.2-static.patch @@ -0,0 +1,23 @@ +--- mdadm-3.2.1/Makefile.static 2011-03-27 22:31:20.000000000 -0400 ++++ mdadm-3.2.1/Makefile 2011-03-28 10:16:55.277900184 -0400 +@@ -238,16 +238,16 @@ install : mdadm mdmon install-man instal + $(INSTALL) -D $(STRIP) -m 755 mdmon $(DESTDIR)$(BINDIR)/mdmon + + install-static : mdadm.static install-man +- $(INSTALL) -D $(STRIP) -m 755 mdadm.static $(DESTDIR)$(BINDIR)/mdadm ++ $(INSTALL) -D $(STRIP) -m 755 mdadm.static $(DESTDIR)$(BINDIR)/mdadm.static + + install-tcc : mdadm.tcc install-man +- $(INSTALL) -D $(STRIP) -m 755 mdadm.tcc $(DESTDIR)$(BINDIR)/mdadm ++ $(INSTALL) -D $(STRIP) -m 755 mdadm.tcc $(DESTDIR)$(BINDIR)/mdadm.tcc + + install-uclibc : mdadm.uclibc install-man +- $(INSTALL) -D $(STRIP) -m 755 mdadm.uclibc $(DESTDIR)$(BINDIR)/mdadm ++ $(INSTALL) -D $(STRIP) -m 755 mdadm.uclibc $(DESTDIR)$(BINDIR)/mdadm.uclibc + + install-klibc : mdadm.klibc install-man +- $(INSTALL) -D $(STRIP) -m 755 mdadm.klibc $(DESTDIR)$(BINDIR)/mdadm ++ $(INSTALL) -D $(STRIP) -m 755 mdadm.klibc $(DESTDIR)$(BINDIR)/mdadm.klibc + + install-man: mdadm.8 md.4 mdadm.conf.5 mdmon.8 + $(INSTALL) -D -m 644 mdadm.8 $(DESTDIR)$(MAN8DIR)/mdadm.8 diff --git a/SOURCES/mdadm-3.3-udev.patch b/SOURCES/mdadm-3.3-udev.patch new file mode 100644 index 0000000..8483d5c --- /dev/null +++ b/SOURCES/mdadm-3.3-udev.patch @@ -0,0 +1,13 @@ +--- mdadm/udev-md-raid-assembly.rules~ 2017-09-19 11:22:49.912766829 +0800 ++++ mdadm/udev-md-raid-assembly.rules 2017-09-19 11:23:23.951809560 +0800 +@@ -5,6 +5,10 @@ + ENV{ANACONDA}=="?*", GOTO="md_inc_end" + # assemble md arrays + ++# In Fedora we handle the raid components in 65-md-incremental.rules so that ++# we can do things like honor anaconda command line options and such ++GOTO="md_inc_end" ++ + SUBSYSTEM!="block", GOTO="md_inc_end" + + # skip non-initialized devices diff --git a/SOURCES/mdadm-3.3.2-skip-rules.patch b/SOURCES/mdadm-3.3.2-skip-rules.patch new file mode 100644 index 0000000..01972fb --- /dev/null +++ b/SOURCES/mdadm-3.3.2-skip-rules.patch @@ -0,0 +1,11 @@ +--- mdadm-4.1_rc1/Makefile~ 2018-06-22 10:03:20.624635889 +0800 ++++ mdadm-4.1_rc1/Makefile 2018-06-22 10:03:40.949636477 +0800 +@@ -259,7 +259,7 @@ + + install-udev: udev-md-raid-arrays.rules udev-md-raid-assembly.rules udev-md-raid-creating.rules \ + udev-md-clustered-confirm-device.rules +- @for file in 01-md-raid-creating.rules 63-md-raid-arrays.rules 64-md-raid-assembly.rules \ ++ @for file in 01-md-raid-creating.rules 63-md-raid-arrays.rules \ + 69-md-clustered-confirm-device.rules ; \ + do sed -e 's,BINDIR,$(BINDIR),g' udev-$${file#??-} > .install.tmp.1 && \ + $(ECHO) $(INSTALL) -D -m 644 udev-$${file#??-} $(DESTDIR)$(UDEVDIR)/rules.d/$$file ; \ diff --git a/SOURCES/mdadm-3.4-udev-race.patch b/SOURCES/mdadm-3.4-udev-race.patch new file mode 100644 index 0000000..10475a2 --- /dev/null +++ b/SOURCES/mdadm-3.4-udev-race.patch @@ -0,0 +1,10 @@ +--- mdadm-3.4/udev-md-raid-arrays.rules-orig 2016-09-13 16:17:06.275757220 -0400 ++++ mdadm-3.4/udev-md-raid-arrays.rules 2016-09-14 16:30:33.597189689 -0400 +@@ -5,6 +5,7 @@ + # handle md arrays + ACTION!="add|change", GOTO="md_end" + KERNEL!="md*", GOTO="md_end" ++ATTR{md/metadata_version}!="external:[A-Za-z]*", ATTR{size}=="0", ENV{SYSTEMD_READY}="0", GOTO="md_end" + + # partitions have no md/{array_state,metadata_version}, but should not + # for that reason be ignored. diff --git a/SOURCES/mdadm-cron b/SOURCES/mdadm-cron new file mode 100644 index 0000000..4e05d68 --- /dev/null +++ b/SOURCES/mdadm-cron @@ -0,0 +1,3 @@ +# Run system wide raid-check once a week on Sunday at 1am by default +0 1 * * Sun root /usr/sbin/raid-check + diff --git a/SOURCES/mdadm-raid-check-sysconfig b/SOURCES/mdadm-raid-check-sysconfig new file mode 100644 index 0000000..8e82270 --- /dev/null +++ b/SOURCES/mdadm-raid-check-sysconfig @@ -0,0 +1,60 @@ +#!/bin/bash +# +# Configuration file for /etc/cron.weekly/raid-check +# +# options: +# ENABLED - must be yes in order for the raid check to proceed +# CHECK - can be either check or repair depending on the type of +# operation the user desires. A check operation will scan +# the drives looking for bad sectors and automatically +# repairing only bad sectors. If it finds good sectors that +# contain bad data (meaning that the data in a sector does +# not agree with what the data from another disk indicates +# the data should be, for example the parity block + the other +# data blocks would cause us to think that this data block +# is incorrect), then it does nothing but increments the +# counter in the file /sys/block/$dev/md/mismatch_count. +# This allows the sysadmin to inspect the data in the sector +# and the data that would be produced by rebuilding the +# sector from redundant information and pick the correct +# data to keep. The repair option does the same thing, but +# when it encounters a mismatch in the data, it automatically +# updates the data to be consistent. However, since we really +# don't know whether it's the parity or the data block that's +# correct (or which data block in the case of raid1), it's +# luck of the draw whether or not the user gets the right +# data instead of the bad data. This option is the default +# option for devices not listed in either CHECK_DEVS or +# REPAIR_DEVS. +# CHECK_DEVS - a space delimited list of devs that the user specifically +# wants to run a check operation on. +# REPAIR_DEVS - a space delimited list of devs that the user +# specifically wants to run a repair on. +# SKIP_DEVS - a space delimited list of devs that should be skipped +# NICE - Change the raid check CPU and IO priority in order to make +# the system more responsive during lengthy checks. Valid +# values are high, normal, low, idle. +# MAXCONCURENT - Limit the number of devices to be checked at a time. +# By default all devices will be checked at the same time. +# +# Note: the raid-check script intentionaly runs last in the cron.weekly +# sequence. This is so we can wait for all the resync operations to complete +# and then check the mismatch_count on each array without unduly delaying +# other weekly cron jobs. If any arrays have a non-0 mismatch_count after +# the check completes, we echo a warning to stdout which will then me emailed +# to the admin as long as mails from cron jobs have not been redirected to +# /dev/null. We do not wait for repair operations to complete as the +# md stack will correct any mismatch_cnts automatically. +# +# Note2: you can not use symbolic names for the raid devices, such as you +# /dev/md/root. The names used in this file must match the names seen in +# /proc/mdstat and in /sys/block. + +ENABLED=yes +CHECK=check +NICE=low +# To check devs /dev/md0 and /dev/md3, use "md0 md3" +CHECK_DEVS="" +REPAIR_DEVS="" +SKIP_DEVS="" +MAXCONCURRENT= diff --git a/SOURCES/mdadm.conf b/SOURCES/mdadm.conf new file mode 100644 index 0000000..6200117 --- /dev/null +++ b/SOURCES/mdadm.conf @@ -0,0 +1 @@ +d /var/run/mdadm 0710 root root - diff --git a/SOURCES/mdadm.rules b/SOURCES/mdadm.rules new file mode 100644 index 0000000..6031d05 --- /dev/null +++ b/SOURCES/mdadm.rules @@ -0,0 +1,60 @@ +# This file causes block devices with Linux RAID (mdadm) signatures to +# automatically cause mdadm to be run. +# See udev(8) for syntax + +# Don't process any events if anaconda is running as anaconda brings up +# raid devices manually +ENV{ANACONDA}=="?*", GOTO="md_end" + +# Also don't process disks that are slated to be a multipath device +ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="md_end" + +# We process add events on block devices (since they are ready as soon as +# they are added to the system), but we must process change events as well +# on any dm devices (like LUKS partitions or LVM logical volumes) and on +# md devices because both of these first get added, then get brought live +# and trigger a change event. The reason we don't process change events +# on bare hard disks is because if you stop all arrays on a disk, then +# run fdisk on the disk to change the partitions, when fdisk exits it +# triggers a change event, and we want to wait until all the fdisks on +# all member disks are done before we do anything. Unfortunately, we have +# no way of knowing that, so we just have to let those arrays be brought +# up manually after fdisk has been run on all of the disks. + +# First, process all add events (md and dm devices will not really do +# anything here, just regular disks, and this also won't get any imsm +# array members either) +SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="linux_raid_member", \ + IMPORT{program}="/sbin/mdadm -I $env{DEVNAME} --export $devnode --offroot ${DEVLINKS}" +SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="linux_raid_member", \ + ENV{MD_STARTED}=="*unsafe*", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer" + +# Next, check to make sure the BIOS raid stuff wasn't turned off via cmdline +IMPORT{cmdline}="noiswmd" +IMPORT{cmdline}="nodmraid" +ENV{noiswmd}=="?*", GOTO="md_imsm_inc_end" +ENV{nodmraid}=="?*", GOTO="md_imsm_inc_end" +SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="isw_raid_member", \ + RUN+="/sbin/mdadm -I $env{DEVNAME}" +LABEL="md_imsm_inc_end" + +SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}=="?*", \ + RUN+="/sbin/mdadm -If $name --path $env{ID_PATH}" +SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}!="?*", \ + RUN+="/sbin/mdadm -If $name" + +# Next make sure that this isn't a dm device we should skip for some reason +ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="dm_change_end" +ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_change_end" +ENV{DM_SUSPENDED}=="1", GOTO="dm_change_end" +KERNEL=="dm-*", SUBSYSTEM=="block", ENV{ID_FS_TYPE}=="linux_raid_member", \ + ACTION=="change", RUN+="/sbin/mdadm -I $env{DEVNAME}" +LABEL="dm_change_end" + +# Finally catch any nested md raid arrays. If we brought up an md raid +# array that's part of another md raid array, it won't be ready to be used +# until the change event that occurs when it becomes live +KERNEL=="md*", SUBSYSTEM=="block", ENV{ID_FS_TYPE}=="linux_raid_member", \ + ACTION=="change", RUN+="/sbin/mdadm -I $env{DEVNAME}" + +LABEL="md_end" diff --git a/SOURCES/mdadm_event.conf b/SOURCES/mdadm_event.conf new file mode 100644 index 0000000..1a6c479 --- /dev/null +++ b/SOURCES/mdadm_event.conf @@ -0,0 +1,5 @@ +# Save /proc/mdstat in case of crash in mdadm/mdmon + +EVENT=post-create component=mdadm + cat /proc/mdstat >> mdstat_data + echo "Saved output of /proc/mdstat" diff --git a/SOURCES/mdmonitor.init b/SOURCES/mdmonitor.init new file mode 100755 index 0000000..03f3e95 --- /dev/null +++ b/SOURCES/mdmonitor.init @@ -0,0 +1,118 @@ +#!/bin/bash +# +# mdmonitor This starts, stops, and reloads the mdadm-based +# software RAID monitoring and management facility +# +# chkconfig: 2345 15 85 +# description: software RAID monitoring and management +# config: /etc/mdadm.conf +# +# Copyright 2002 Red Hat, Inc. +# +### BEGIN INIT INFO +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Start and stop the MD software RAID monitor +# Description: The mdmonitor service checks the status of all software +# RAID arrays on the system. In the event that any of the arrays +# transition into a degraded state, it notifies the system +# administrator. Other options are available, see the mdadm.conf +# and mdadm man pages for possible ways to configure this service. +### END INIT INFO + +PIDPATH=/var/run/mdadm +PIDFILE=/var/run/mdadm/mdadm.pid +PATH=/sbin:/usr/sbin:$PATH +RETVAL=0 +OPTIONS="--monitor --scan -f --pid-file=$PIDFILE" + +prog=mdmonitor + +# Source function library. +. /etc/rc.d/init.d/functions + + +usage () +{ + echo "Usage: service $prog {start|stop|status|restart|try-restart|force-reload}" + RETVAL=1 +} + + +start () +{ +# (Re)start mdmon to take over monitoring of mdmon started from the initrd + for i in /dev/md/*.pid; do + if [ -r $i ]; then + origprog="$prog"; prog="mdmon" + action $"Starting $prog: " /sbin/mdmon --takeover --all + prog="$origprog" + break + fi + done +# Make sure configuration file exists and has information we can use +# MAILADDR or PROGRAM or both must be set in order to run mdadm --monitor + [ -f /etc/mdadm.conf ] || return 6 + grep '^\(MAILADDR\|PROGRAM\) .' /etc/mdadm.conf >/dev/null 2>&1 || return 6 + # Create our directory if it isn't there yet + if [ ! -d $PIDPATH ]; then + mkdir -m 0700 $PIDPATH >&/dev/null + RC=$? + [ -x /sbin/restorecon ] && /sbin/restorecon $PIDPATH + if [ $RC -ne 0 ]; then + echo -n "Failed to create /var/run/mdadm" + failure + echo + return 1 + fi + fi + if [ -f "$PIDFILE" ]; then + checkpid `cat $PIDFILE` && return 0 + fi + echo -n $"Starting $prog: " + cd / + daemon --user=root mdadm ${OPTIONS} + ret=$? + [ $ret -eq "0" ] && touch /var/lock/subsys/$prog + echo + return $ret +} + +stop () +{ + [ -f /var/lock/subsys/$prog ] || return 0 + echo -n "Killing $prog: " + killproc mdadm + echo + rm -f $PIDFILE + rm -f /var/lock/subsys/$prog +} + +restart () +{ + stop + start +} + +condrestart () +{ + [ -e /var/lock/subsys/$prog ] && restart || return 0 +} + + +case "$1" in + start|stop|restart|condrestart|try-restart|force-reload) + [ `id -u` != "0" ] && exit 4 ;; +esac + +case "$1" in + start) start; RETVAL=$? ;; + stop) stop; RETVAL=$? ;; + status) status -p $PIDFILE $prog ; RETVAL=$? ;; + restart) restart; RETVAL=$? ;; + reload) RETVAL=3 ;; + condrestart|try-restart|force-reload) condrestart; RETVAL=$? ;; + *) usage ; RETVAL=2 ;; +esac + +exit $RETVAL diff --git a/SOURCES/mdmonitor.service b/SOURCES/mdmonitor.service new file mode 100644 index 0000000..08cae12 --- /dev/null +++ b/SOURCES/mdmonitor.service @@ -0,0 +1,14 @@ +[Unit] +Description=Software RAID monitoring and management +After=syslog.target +ConditionPathExists=/etc/mdadm.conf + +[Service] +Type=forking +PIDFile=/var/run/mdadm/mdadm.pid +Environment= MDADM_MONITOR_ARGS=--scan +EnvironmentFile=-/etc/sysconfig/mdmonitor +ExecStart=/sbin/mdadm --monitor $MDADM_MONITOR_ARGS -f --pid-file=/var/run/mdadm/mdadm.pid + +[Install] +WantedBy=multi-user.target diff --git a/SOURCES/raid-check b/SOURCES/raid-check new file mode 100644 index 0000000..7b2fb59 --- /dev/null +++ b/SOURCES/raid-check @@ -0,0 +1,135 @@ +#!/bin/bash +# +# This script reads it's configuration from /etc/sysconfig/raid-check +# Please use that file to enable/disable this script or to set the +# type of check you wish performed. + +# We might be on a kernel with no raid support at all, exit if so +[ -f /proc/mdstat ] || exit 0 + +# and exit if we haven't been set up properly +[ -f /etc/sysconfig/raid-check ] || exit 0 +. /etc/sysconfig/raid-check + +# Wait until no more than arg1 arrays in arg2 list are busy +waitbusy() { + local threshold=$(($1 + 1)) + local dev_list="$2" + while true + do + local busy=0 + local dev="" + for dev in $dev_list; do + local sync_action=`cat /sys/block/$dev/md/sync_action` + if [ "$sync_action" != "idle" ]; then + let busy++ + fi + done + [ $busy -lt $threshold ] && break + sleep 60 + done +} + +[ "$ENABLED" != "yes" ] && exit 0 + +case "$CHECK" in + check) ;; + repair) ;; + *) exit 0;; +esac + +ionice="" +renice="" +case $NICE in + high) + renice="-n -5" + ;; + low) + renice="-n 5" + ionice="-c2 -n7" + ;; + idle) + renice="-n 15" + ionice="-c3" + ;; + *) + ;; +esac + +active_list=`grep "^md.*: active" /proc/mdstat | cut -f 1 -d ' '` +[ -z "$active_list" ] && exit 0 + +declare -A check +dev_list="" +check_list="" +for dev in $active_list; do + echo $SKIP_DEVS | grep -w $dev >&/dev/null && continue + if [ -f /sys/block/$dev/md/sync_action ]; then + # Only perform the checks on idle, healthy arrays, but delay + # actually writing the check field until the next loop so we + # don't switch currently idle arrays to active, which happens + # when two or more arrays are on the same physical disk + array_state=`cat /sys/block/$dev/md/array_state` + if [ "$array_state" != "clean" -a "$array_state" != "active" ]; then + continue + fi + sync_action=`cat /sys/block/$dev/md/sync_action` + if [ "$sync_action" != idle ]; then + continue + fi + ck="" + echo $REPAIR_DEVS | grep -w $dev >&/dev/null && ck="repair" + echo $CHECK_DEVS | grep -w $dev >&/dev/null && ck="check" + [ -z "$ck" ] && ck=$CHECK + dev_list="$dev_list $dev" + check[$dev]=$ck + [ "$ck" = "check" ] && check_list="$check_list $dev" + fi +done +[ -z "$dev_list" ] && exit 0 + +for dev in $dev_list; do + #Only run $MAXCONCURRENT checks at a time + if [ -n "$MAXCONCURRENT" ]; then + waitbusy $((MAXCONCURRENT - 1)) "$dev_list" + fi + echo "${check[$dev]}" > /sys/block/$dev/md/sync_action + + resync_pid="" + wait=10 + while [ $wait -gt 0 -a -z "$resync_pid" ]; do + sleep 6 + let wait-- + resync_pid=$(ps -ef | awk -v mddev=$dev 'BEGIN { pattern = "^\\[" mddev "_resync]$" } $8 ~ pattern { print $2 }') + done + [ -n "$resync_pid" -a -n "$renice" ] && + renice $renice -p $resync_pid >&/dev/null + [ -n "$resync_pid" -a -n "$ionice" ] && + ionice $ionice -p $resync_pid >&/dev/null +done +[ -z "$check_list" ] && exit 0 + +waitbusy 0 "$check_list" + +for dev in $check_list; do + mismatch_cnt=`cat /sys/block/$dev/md/mismatch_cnt` + # Due to the fact that raid1/10 writes in the kernel are unbuffered, + # a raid1 array can have non-0 mismatch counts even when the + # array is healthy. These non-0 counts will only exist in + # transient data areas where they don't pose a problem. However, + # since we can't tell the difference between a non-0 count that + # is just in transient data or a non-0 count that signifies a + # real problem, simply don't check the mismatch_cnt on raid1 + # devices as it's providing far too many false positives. But by + # leaving the raid1 device in the check list and performing the + # check, we still catch and correct any bad sectors there might + # be in the device. + raid_lvl=`cat /sys/block/$dev/md/level` + if [ "$raid_lvl" = "raid1" -o "$raid_lvl" = "raid10" ]; then + continue + fi + if [ "$mismatch_cnt" -ne 0 ]; then + echo "WARNING: mismatch_cnt is not 0 on /dev/$dev" + fi +done + diff --git a/SPECS/mdadm.spec b/SPECS/mdadm.spec new file mode 100644 index 0000000..d0bf245 --- /dev/null +++ b/SPECS/mdadm.spec @@ -0,0 +1,1171 @@ +Summary: The mdadm program controls Linux md devices (software RAID arrays) +Name: mdadm +Version: 4.1 +Release: 1%{?dist} +Source: http://www.kernel.org/pub/linux/utils/raid/mdadm/mdadm-%{version}.tar.xz +Source1: mdmonitor.init +Source2: raid-check +Source3: mdadm.rules +Source4: mdadm-raid-check-sysconfig +Source5: mdadm-cron +Source6: mdmonitor.service +Source7: mdadm.conf +Source8: mdadm_event.conf + +Patch1: 0001-Assemble-keep-MD_DISK_FAILFAST-and-MD_DISK_WRITEMOST.patch +Patch2: 0002-Document-PART-POLICY-lines.patch +Patch3: 0003-policy-support-devices-with-multiple-paths.patch +Patch4: 0004-mdcheck-add-systemd-unit-files-to-run-mdcheck.patch +Patch5: 0005-Monitor-add-system-timer-to-run-oneshot-periodically.patch +Patch6: 0006-imsm-update-metadata-correctly-while-raid10-double-d.patch +Patch7: 0007-Assemble-mask-FAILFAST-and-WRITEMOSTLY-flags-when-fi.patch +Patch8: 0008-Grow-avoid-overflow-in-compute_backup_blocks.patch +Patch9: 0009-Grow-report-correct-new-chunk-size.patch +Patch10: 0010-policy.c-prevent-NULL-pointer-referencing.patch +Patch11: 0011-policy.c-Fix-for-compiler-error.patch +Patch12: 0012-imsm-finish-recovery-when-drive-with-rebuild-fails.patch +Patch13: 0013-imsm-fix-reshape-for-2TB-drives.patch +Patch14: 0014-Fix-spelling-typos.patch +Patch15: 0015-Detail.c-do-not-skip-first-character-when-calling-xs.patch +Patch16: 0016-Fix-reshape-for-decreasing-data-offset.patch +Patch17: 0017-mdadm-tests-add-one-test-case-for-failfast-of-raid1.patch +Patch18: 0018-mdmon-don-t-attempt-to-manage-new-arrays-when-termin.patch +Patch19: 0019-mdmon-wait-for-previous-mdmon-to-exit-during-takeove.patch +Patch20: 0020-Assemble-Fix-starting-array-with-initial-reshape-che.patch +Patch21: 0021-add-missing-units-to-examine.patch + +# RHEL customization patches +Patch195: mdadm-3.4-udev-race.patch +Patch196: mdadm-3.3.2-skip-rules.patch +Patch197: mdadm-3.3-udev.patch +Patch198: mdadm-2.5.2-static.patch +URL: http://www.kernel.org/pub/linux/utils/raid/mdadm/ +License: GPLv2+ +Group: System Environment/Base +BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) +Obsoletes: mdctl,raidtools +Obsoletes: mdadm-sysvinit +Conflicts: dracut < 024-25 +Requires(post): systemd-units chkconfig coreutils +BuildRequires: systemd-units binutils-devel +Requires(preun): systemd-units +Requires(postun): systemd-units coreutils +Requires: libreport-filesystem + +%define _hardened_build 1 + +%description +The mdadm program is used to create, manage, and monitor Linux MD (software +RAID) devices. As such, it provides similar functionality to the raidtools +package. However, mdadm is a single program, and it can perform +almost all functions without a configuration file, though a configuration +file can be used to help with some common tasks. + +%prep +%setup -q + +%patch1 -p1 -b .0001 +%patch2 -p1 -b .0002 +%patch3 -p1 -b .0003 +%patch4 -p1 -b .0004 +%patch5 -p1 -b .0005 +%patch6 -p1 -b .0006 +%patch7 -p1 -b .0007 +%patch8 -p1 -b .0008 +%patch9 -p1 -b .0009 +%patch10 -p1 -b .0010 +%patch11 -p1 -b .0011 +%patch12 -p1 -b .0012 +%patch13 -p1 -b .0013 +%patch14 -p1 -b .0014 +%patch15 -p1 -b .0015 +%patch16 -p1 -b .0016 +%patch17 -p1 -b .0017 +%patch18 -p1 -b .0018 +%patch19 -p1 -b .0019 +%patch20 -p1 -b .0020 +%patch21 -p1 -b .0021 + +# RHEL customization patches +%patch195 -p1 -b .race +%patch196 -p1 -b .rules +%patch197 -p1 -b .udev +%patch198 -p1 -b .static + +%build +make %{?_smp_mflags} CXFLAGS="$RPM_OPT_FLAGS" LDFLAGS="$RPM_LD_FLAGS" SYSCONFDIR="%{_sysconfdir}" mdadm mdmon + +%install +rm -rf %{buildroot} +make DESTDIR=%{buildroot} MANDIR=%{_mandir} BINDIR=%{_sbindir} SYSTEMD_DIR=%{_unitdir} install install-systemd +install -Dp -m 755 %{SOURCE2} %{buildroot}%{_sbindir}/raid-check +install -Dp -m 644 %{SOURCE3} %{buildroot}%{_udevrulesdir}/65-md-incremental.rules +install -Dp -m 644 %{SOURCE4} %{buildroot}%{_sysconfdir}/sysconfig/raid-check +install -Dp -m 644 %{SOURCE5} %{buildroot}%{_sysconfdir}/cron.d/raid-check +mkdir -p -m 700 %{buildroot}/var/run/mdadm + +# systemd +mkdir -p %{buildroot}%{_unitdir} +install -m644 %{SOURCE6} %{buildroot}%{_unitdir} + +# tmpfile +mkdir -p %{buildroot}%{_tmpfilesdir} +install -m 0644 %{SOURCE7} %{buildroot}%{_tmpfilesdir}/%{name}.conf +mkdir -p %{buildroot}%{_localstatedir}/run/ +install -d -m 0710 %{buildroot}%{_localstatedir}/run/%{name}/ + +# abrt +mkdir -p %{buildroot}/etc/libreport/events.d +install -m644 %{SOURCE8} %{buildroot}/etc/libreport/events.d + +%clean +rm -rf %{buildroot} + +%post +%systemd_post mdmonitor.service +/usr/bin/systemctl disable mdmonitor-takeover.service >/dev/null 2>&1 || : + +%preun +%systemd_preun mdmonitor.service + +%postun +%systemd_postun_with_restart mdmonitor.service + +%triggerun -- %{name} < 3.2.2-3 +%{_bindir}/systemd-sysv-convert --save mdmonitor >/dev/null 2>&1 || : +/bin/systemctl --no-reload enable mdmonitor.service >/dev/null 2>&1 || : +/sbin/chkconfig --del mdmonitor >/dev/null 2>&1 || : +/bin/systemctl try-restart mdmonitor.service >/dev/null 2>&1 || : + +%files +%defattr(-,root,root,-) +%doc TODO ChangeLog mdadm.conf-example COPYING misc/* +%{_udevrulesdir}/* +%{_sbindir}/* +%{_unitdir}/* +%{_mandir}/man*/md* +/usr/lib/systemd/system-shutdown/* +%config(noreplace) %{_sysconfdir}/cron.d/* +%config(noreplace) %{_sysconfdir}/sysconfig/* +%dir %{_localstatedir}/run/%{name}/ +%config(noreplace) %{_tmpfilesdir}/%{name}.conf +/etc/libreport/events.d/* + +%changelog +* Mon Mar 11 2019 Xiao Ni - 4.1.1 +- Update to upstream 4.1 and backport 21 patches after 4.1 +- Resolves rhbz#1641473 + +* Thu Aug 02 2018 Xiao Ni - 4.1-rc1-2 +- Fix two IMSM bugs +- Resolves rhbz#1602362 and rhbz#1602358 + +* Fri Jun 22 2018 Xiao Ni - 4.1-rc1-1 +- Upgrade to upstream mdadm-4.1-rc1 +- Resolves rhbz#1494472 + +* Wed Feb 07 2018 Xiao Ni - 4.0-13 +- stop previous reshape process first +- Resolves rhbz#1507415 + +* Wed Jan 31 2018 Xiao Ni - 4.0-12 +- Don't take spare without defined domain by imsm +- Resolves rhbz#1535436 + +* Fri Jan 12 2018 Xiao Ni - 4.0-11 +- Fix some IMSM bugs +- Resolves rhbz#1507439 rhbz#1516800 rhbz#1528267 + +* Mon Dec 11 2017 Xiao Ni - 4.0-10 +- Disable raid5 journal function +- Resolves rhbz#1518477 + +* Fri Nov 03 2017 Xiao Ni - 4.0-9 +- Enable raid5 journal function +- Resolves rhbz1505611 + +* Fri Nov 03 2017 Xiao Ni - 4.0-8 +- Support for multiple-ppl in mdadm +- Resolves rhbz#1500638 + +* Fri Nov 03 2017 Xiao Ni - 4.0-7 +- Support adding flags for mdmonitor.service +- Resolves rhbz#1320018 + +* Mon Sep 18 2017 Xiao Ni - 4.0-6 +- Update to the latest upstream +- Resolves rhbz#1455936 + +* Mon Jun 12 2017 Nigel Croxon - 4.0-5 +- RAID array grow not blocked when PPL is enabled +- Resolves rhbz#1460141 + +* Wed May 31 2017 Xiao Ni - 4.0-4 +- Imsm should not allow combing 512 and 4096 sector size disks in + one volume and Wrong array size shown for array built on 4096 + sector size disks +- Resolves rhbz#1454390 and rhbz#1454379 + +* Wed May 17 2017 Xiao Ni - 4.0-3 +- Support for Partial Parity Log +- Resolves rhbz#1450057 + +* Thu Apr 13 2017 Nigel Croxon - 4.0-2 +- Rebuilt for submission +- Resolves rhbz#1385946 + +* Sun Feb 26 2017 Xiao Ni - 4.0-1 +- Update to upstream 4.0 +- Resolves rhbz#1380017 + +* Wed Nov 16 2016 Jes Sorensen - 3.4-15 +- Resolve case where a reshape could hang if started right after the + completion of a resync. +- Resolves rhbz#1386700 + +* Tue Sep 27 2016 Jes Sorensen - 3.4-14 +- The fix for 1331709 caused a problem with container arrays (IMSM) as + these can show up with a valid size of 0. Work around this to only + exit for non container arrays. +- Resolves rhbz#1379194 + +* Wed Sep 14 2016 Jes Sorensen - 3.4-13 +- Make udev-md-array-arrays.rules more resilient to races if arrays are + assembled and stopped and reassembled quick after each other. +- Resolves rhbz#1331709 + +* Thu Aug 25 2016 Jes Sorensen - 3.4-12 +- Apply additional required patch to fix buffer overrun using long device + names +- Resolves rhbz#1369891 + +* Wed Aug 24 2016 Jes Sorensen - 3.4-11 +- Fix problem when creating more than 127 md arrays leading to overruns +- Resolves rhbz#1369891 + +* Thu Aug 11 2016 Jes Sorensen - 3.4-10 +- Fix fix to enable security through obscurity +- Resolves rhbz#1225025 + +* Tue Aug 9 2016 Xiao Ni - 3.4-9 +- Fix problem about reshape stuck at beginning +- Resolves rhbz#1172937 + +* Fri Aug 5 2016 Jes Sorensen - 3.4-8 +- Disable support for creating and reshaping into arrays with journals. +- Resolves rhbz#1360464 + +* Mon Jun 20 2016 Jes Sorensen - 3.4-7 +- Fix problem with mdadm large device names overflowing an internal buffer +- Resolves rhbz#1347749 + +* Mon Jun 20 2016 Jes Sorensen - 3.4-6 +- Fix problem with reshaping IMSM arrays, where a new reshape could be + launched before the first reshape had fully completed, leading to + unpected results. +- Resolves rhbz#1347762 + +* Thu Jun 9 2016 Jes Sorensen - 3.4-5 +- Enable security through obscurity +- Resolves rhbz#1225025 + +* Thu Jun 9 2016 Jes Sorensen - 3.4-4 +- Fix problem with raid0 arrays not being detected by Anaconda due to it + setting MALLOC_PERTURB_ +- Resolves rhbz#1324637 + +* Thu Apr 28 2016 Xiao Ni - 3.4-3 +- Fix Degraded Raid1 array becomes inactive after rebooting +- Resolves rhbz#1290494 + +* Tue Mar 1 2016 Jes Sorensen - 3.4-2 +- Fix problem where it was not possible to stop an IMSM array during reshape +- Resolves rhbz#1312837 + +* Tue Feb 9 2016 Xiao Ni - 3.4-1 +- Update to mdadm-3.4 +- Resolves rhbz#1273351 + +* Thu Sep 17 2015 Xiao Ni - 3.3.2-6 +- Fix issue reshape is stuck +- Resolves rhbz#1246035 + +* Tue Aug 25 2015 Jes Sorensen - 3.3.2-5 +- Add support for IMSM over NVME storage +- Resolves rhbz#1173504 + +* Thu Jul 2 2015 Xiao Ni - 3.3.2-4 +- Fix issue mdadm --grow --size does not work for >2TB +- Resolves rhbz#1236538 + +* Tue Mar 24 2015 Jes Sorensen - 3.3.2-3 +- Fix issue where migration record was not always cleared after successful + reshape. +- Resolves rhbz#1183724 + +* Mon Jan 19 2015 Jes Sorensen - 3.3.2-2 +- Do not install 64-md-raid-assembly.rules +- Resolves rhbz#1181620 + +* Wed Aug 27 2014 Jes Sorensen - 3.3.2-1 +- Update to upstream mdadm-3.3.2 +- Resolves rhbz#1085533 + +* Fri Jul 25 2014 Jes Sorensen - 3.2.6-33 +- Fix problem with spare disk not being added correctly to IMSM array + because mdmon is unable to write metadata to it. +- Resolves bz1072979 + +* Thu Jul 24 2014 Jes Sorensen - 3.2.6-32 +- Fix issue with mdmon not being launched correctly after reboot + during container reshape second of a second RAID5 array, resulting in + it being read-only and cannot be mounted. +- Resolves bz1074970 + +* Mon Mar 10 2014 Jes Sorensen - 3.2.6-31 +- Fix problem of IMSM platform capabilities not being detected in UEFI + mode when only the second SATA controller is enabled. +- Resolves bz1074161 + +* Mon Mar 3 2014 Jes Sorensen - 3.2.6-30 +- Fix problem where Resync and recovery of RAID10 stopped at more than + 50% does not continue after reassemblation +- Resolves bz1068154 + +* Wed Jan 29 2014 Jes Sorensen - 3.2.6-29 +- Fix problem with mdadm crashing, if trying to create an IMSM array, with + missing devices. +- Resolves bz1056466 + +* Wed Jan 29 2014 Jes Sorensen - 3.2.6-28 +- Fix problem with policy with path=* not working if there is no + /dev/disk/by-path/ directory, as is the case with (S)ATA only systems +- Resovles bz1045510 + +* Wed Jan 29 2014 Jes Sorensen - 3.2.6-27 +- Fix problem with failed disk staying available in IMSM volume/container +- Resolves bz1052904 + +* Wed Jan 29 2014 Jes Sorensen - 3.2.6-26 +- Fix problem with reshape not proceeding after reboot on RAID 0 and RAID 5 +- Resolves bz1046064 + +* Fri Jan 24 2014 Daniel Mach - 3.2.6-25 +- Mass rebuild 2014-01-24 + +* Fri Dec 27 2013 Daniel Mach - 3.2.6-24 +- Mass rebuild 2013-12-27 + +* Thu Nov 21 2013 Jes Sorensen - 3.2.6-23 +- Fix problem with rebuild not restarting on stopped RAID1/10 IMSM arrays +- Resolves bz1032911 + +* Thu Oct 10 2013 Jes Sorensen - 3.2.6-22 +- Check for DM_UDEV_DISABLE_OTHER_RULES_FLAG instead of + DM_UDEV_DISABLE_DISK_RULES_FLAG in 65-md-incremental.rules +- Resolves bz1015515 + +* Thu Aug 29 2013 Jes Sorensen - 3.2.6-21 +- Fix pointless rpmbuild noise over mismatching date info +- Remove Fedora 17 support +- Fix problem where first stop command doesn't stop container during + IMSM volume's bz956059 + +* Wed Apr 24 2013 Jes Sorensen - 3.2.6-19 +- Fix problem where rebuild of IMSM RAID5 volume started in OROM, + does not proceed in OS +- Resolves bz956021 (f18), bz956026 (f17), bz956031 (f19) + +* Tue Apr 23 2013 Jes Sorensen - 3.2.6-18 +- Fix problem with IMSM metadata where resync progress would be lost + if an array was stopped during ongoing expansion of a RAID1/5 volume. +- Resolves bz948745 + +* Tue Apr 23 2013 Jes Sorensen - 3.2.6-17 +- Reorder patches to allow for udev query patch to be applied on + Fedora 17 as well. + +* Mon Apr 22 2013 Jes Sorensen - 3.2.6-16 +- Rely on rpm macros to place files in correct directories, and match /usr + move +- Resolves bz955248 + +* Thu Mar 7 2013 Jes Sorensen - 3.2.6-15 +- Cleanup .spec file handling of different Fedora versions +- Resolves bz914629 + +* Tue Feb 5 2013 Jes Sorensen - 3.2.6-14 +- Resync with final version of upstream patches for launching mdmon + via systemctl. Require dracut 024-025 or later to match. +- Resolves bz879327 + +* Fri Feb 1 2013 Jes Sorensen - 3.2.6-13 +- Update to upstream solution for launching mdmon via systemctl +- Resolves bz879327 + +* Mon Jan 21 2013 Jes Sorensen - 3.2.6-12 +- Launch mdmon via systemctl to avoid it ending up in the wrong cgroup + and getting killed in the boot process when switching from the + initrd to the real root. +- Resolves bz879327 + +* Tue Jan 8 2013 Jes Sorensen - 3.2.6-11 +- Move code to leave udev cgroup into mdmon and excute it after we + work, to make sure it actually does the right thing. + +* Mon Jan 7 2013 Jes Sorensen - 3.2.6-10 +- Fix mdmonitor-takeover.service dangling symlink problem for real + +* Mon Jan 7 2013 Jes Sorensen - 3.2.6-9 +- Reintroduce fix for removing dangling symlink of + mdmonitor-takeover.service which got lost in the fix introduced in + 3.2.6-8 + +* Fri Jan 4 2013 Jes Sorensen - 3.2.6-8 +- mdmonitor-takeover.service is obsolete with the --offroot support, + and it is harmful as of 3.2.6 +- Resolves bz834245 + +* Mon Dec 10 2012 Jes Sorensen - 3.2.6-7 +- Fix issue with udev scripts where if an raid volume with one of + the disks failing, the failed disk is still present in the volume + and container. The raid volume stays is in normal state (should be + degraded) and the rebuild cannot start. +- Resolves bz886123 + +* Mon Dec 10 2012 Jes Sorensen - 3.2.6-5 +- mdadm-sysvinit is obsolete given that we no longer support booting + using sysvinit scripts +- Resolves bz884993 + +* Mon Dec 10 2012 Jes Sorensen - 3.2.6-4 +- Fix typo in error message in fix for 880972. No functional changes + +* Fri Nov 30 2012 Jes Sorensen - 3.2.6-3 +- Disallow creating a second IMSM RAID array size 0 (bz880972) +- Disallow creating IMSM RAIDs that spans multiple controllers (bz880974) +- Resolves bz880972, bz880974 + +* Thu Nov 15 2012 Doug Ledford - 3.2.6-2 +- Modify mdadm to set the cgroup of mdmon to systemd if it's available +- Related bz873576 (and others) + +* Thu Oct 25 2012 Jes Sorensen - 3.2.6-1 +- Upgrade to mdadm-3.2.6 +- Resolves bz869930 + +* Fri Oct 19 2012 Jes Sorensen - 3.2.5-14 +- Dummy update to work around bodhi breakage. No actual code changes. + +* Fri Oct 19 2012 Jes Sorensen - 3.2.5-13 +- Relax installation requirements for abrt script to only depend on + libreport-filesystem rather than the full abrt package + +* Thu Oct 18 2012 Jes Sorensen - 3.2.5-12 +- Add abrt script to retrieve /proc/mdstat output in case of crash +- Resolves bz867842 + +* Wed Oct 17 2012 Jes Sorensen - 3.2.5-11 +- Remove package requirements for udev and initscripts for F18+ +- Resolves bz864562 + +* Wed Oct 3 2012 Jes Sorensen - 3.2.5-9 +- Resolve issue with ambiguous licenses +- Resolves bz862761 + +* Mon Sep 10 2012 Jes Sorensen - 3.2.5-8 +- Switch to using new systemd macros for F18+ +- Resolves bz850202 + +* Thu Aug 2 2012 Jes Sorensen - 3.2.5-7 +- Remove bogus rogue patch applied in 3.2.5-5 with justification and + without following the structure of the mdadm package. + +* Fri Jul 27 2012 Fedora Release Engineering - 3.2.5-6 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild + +* Wed Jul 18 2012 Karsten Hopp 3.2.5-5 +- include in some to avoid type clashes. + same problem as rhbz #840902 + +* Mon Jul 16 2012 Jes Sorensen - 3.2.5-4 +- Move /etc/tmpfiles.d/mdadm.conf to /lib/tmpfiles.d/ to comply with + Fedora tmpfile rules +- Resolves bz840187 + +* Mon Jun 25 2012 Jes Sorensen - 3.2.5-3 +- Fix problem where reshape of RAID volume is broken after trying to + stop all MD devices. +- Enhance raid-check to allow the adming to specify the max number of + concurrent arrays to be checked at any given time. +- Resolves bz830177, bz820124 + +* Wed Jun 13 2012 Jes Sorensen - 3.2.5-2 +- Fix uninstall script to remove dangling symlink to + mdmonitor-takeover.service, if the mdadm package is uninstalled from + the system. +- Resolves bz828354 + +* Mon May 21 2012 Jes Sorensen - 3.2.5-1 +- Upgrade to mdadm-3.2.5 +- Resolves bz822850 + +* Tue May 15 2012 Jes Sorensen - 3.2.4-3 +- Fix mdadm-3.2.4 introduced bug where --add fails in common cases +- Resolves bz821717 (f17) bz821718 (f16) bz821719 (f15) + +* Thu May 10 2012 Jes Sorensen - 3.2.4-2 +- Fix mdadm.conf to use 'd' for /var/run/mdadm creation, to avoid the + map file getting deleted during boot. + +* Thu May 10 2012 Jes Sorensen - 3.2.4-1 +- Upgrade to mdadm-3.2.4 +- Resolves bz820534 (rawhide) bz820527 (f17) bz820531 (f16) bz820532 (f15) + +* Mon Apr 30 2012 Jes Sorensen - 3.2.3-9 +- Fix Monitor mode sometimes crashes when a resync completes +- Fix missing symlink for mdadm container device when incremental creates + the array +- Make sure when creating a second array in a container that the second + array uses all available space since leaving space for a third array + is invalid +- Validate the number of imsm volumes per controller +- Fix issues with imsm arrays and disks larger than 2TB +- Add support for expanding imsm arrays/containers +- The support for expanding imsm arrays/containers was accepted upstream, + update to the official patches from there +- Fix for the issue of --add not being very smart +- Fix an issue causing rebuilds to fail to restart on reboot (data + corrupter level problem) +- Reset the bad flag on map file updates +- Correctly fix failure when trying to add internal bitmap to 1.0 arrays +- Resolves: bz817023 (f17) bz817024 (f17) bz817026 (f17) bz817028 (f17) +- Resolves: bz817029 (f17) bz817032 (f17) bz817038 (f17) bz808774 (f17) +- Resolves: bz817039 (f17) bz817042 (f17) + +* Mon Apr 30 2012 Jes Sorensen - 3.2.3-8 +- Fix bug where IMSM arrays stay inactive in case a reboot is +- performed during the reshape process. +- Resolves: bz817522 (f17) bz817535 (f16) bz817537 (f15) + +* Wed Mar 28 2012 Jes Sorensen - 3.2.3-7 +- Fix issue when re-adding drive to a raid1 array with bitmap +- Resolves: bz807743 (f17) bz769323 (f16) bz791159 (f15) + +* Thu Feb 23 2012 Jes Sorensen - 3.2.3-6 +- Fix double free on buggy old kernel sysfs read +- Fix segfault if trying to write superblock to non existing device +- Resolves: bz795707 (f17) bz795747 (f16) bz795748 (f15) +- Resolves: bz795461 (f17) bz795749 (f16) bz795750 (f15) + +* Thu Feb 16 2012 Jes Sorensen - 3.2.3-5 +- Fix issue with devices failing to be added to a raid using bitmaps, + due to trying to write the bitmap with mis-aligned buffers using + O_DIRECT +- Resolves: bz789898 (f16) bz791189 (f15) + +* Mon Jan 30 2012 Jes Sorensen - 3.2.3-4 +- Add support for --offroot to mdadm/mdmon +- Resolves: bz785739 (rawhide) bz785737 (f16) bz771405 (f15) + +* Thu Jan 12 2012 Jes Sorensen - 3.2.3-3 +- Fix case where we have to retry in case a remove fails due to an array + being busy +- Resolves: bz773337 (rawhide) bz773340 (f16) bz773341 (f15) + +* Thu Jan 5 2012 Jes Sorensen - 3.2.3-2 +- Workaround for gcc-4.7 strict aliasing breaking the build + +* Wed Jan 4 2012 Jes Sorensen - 3.2.3-1 +- Update to upstream 3.2.3 +- Resolves: bz770110 (rawhide) bz771413 (f16) bz759014 (rawhide) +- Resolves: bz759015 (f16) bz759035 (rawhide) bz759036 (f16) +- Resolves: bz771608 (f15) bz759016 (f15) bz759039 (f15) + +* Mon Nov 21 2011 Jes Sorensen - 3.2.2-15 +- Backport upstream fix for memory leak that can prevent migration to + RAID5 from completing. +- Backport upstream fix preventing mounting a device while it is in + process of reshaping +- Resolves: bz755005 bz755009 + +* Wed Nov 9 2011 Jes Sorensen - 3.2.2-14 +- Backport upstream fixes to prevent growing v0.90 metadata raid out + of supported size. +- Add missing 'disable' argument to systemctl in preun script +- Resolves: bz735306 (Fedora 15) bz748731 (Fedora 16) bz748732 (rawhide), + Resolves: bz751716 + +* Wed Oct 26 2011 Fedora Release Engineering - 3.2.2-13 +- Rebuilt for glibc bug#747377 + +* Sat Oct 22 2011 Jes Sorensen - 3.2.2-12 +- Backport upstream version of fix for IMSM RAID assembly problem, + which resolves issues when booting off sysvinit based system. +- Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16) + +* Wed Oct 19 2011 Jes Sorensen - 3.2.2-11 +- Fix systemd dependency problem +- Resolves: bz741115 (F16) bz744226 (rawhide) + +* Wed Oct 19 2011 Jes Sorensen - 3.2.2-10 +- Fix problem where a dirty IMSM RAID isn't assembled correctly during + boot, preventing booting from this RAID device. +- Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16) +- Fix race between udev and mdadm when assembling md device using + mdadm -I, where udev would spawn an additional mdadm command to + perform the assembly in parallel. + +* Wed Aug 31 2011 Doug Ledford - 3.2.2-9 +- Fix boot with older imsm arrays that have an unused attribute set +- Resolves: bz729205 + +* Thu Aug 25 2011 Doug Ledford - 3.2.2-8 +- Rework the 65-md-incremental.rules file to add the following support: + Nested md raid arrays should now work + MD on top of LUKS or other lvm based devices should now work + We should no longer grab multipath paths before multipath can + +* Wed Jul 27 2011 Doug Ledford - 3.2.2-7 +- Fix a bug with readding a device +- Fix a bug with writemostly flag handling + +* Mon Jul 18 2011 Doug Ledford - 3.2.2-6 +- Bump and rebuild again + +* Fri Jul 15 2011 Doug Ledford - 3.2.2-5 +- Bump and rebuild to keep version ahead of f15 version + +* Thu Jul 14 2011 Doug Ledford - 3.2.2-4 +- Fix minor issue in man page +- Resolves: bz717795 + +* Thu Jul 07 2011 Milan Broz - 3.2.2-3 +- Use unit files with systemd. (johannbg) +- Add sub-package sysvinit for SysV init script. +- Resolves: bz713573 + +* Wed Jul 06 2011 Milan Broz - 3.2.2-2 +- Fix build on PPC. +- Resolves: bz719380 + +* Tue Jun 28 2011 Milan Broz - 3.2.2-1 +- Update to latest upstream version +- Resolves: bz714083 + +* Tue Jun 14 2011 Doug Ledford - 3.2.1-5 +- Fix for bz710646 + +* Thu Mar 31 2011 Doug Ledford - 3.2.1-4 +- Somehow the 64-md-raid.rules file went missing. Put it back. +- Resolves: bz692248 + +* Thu Mar 31 2011 Doug Ledford - 3.2.1-3 +- Fix mdmonitor init script setup of SELinux on PIDPATH +- Resolves: bz692559 + +* Mon Mar 28 2011 Doug Ledford - 3.2.1-2 +- Restore build command to sane command instead of test command + +* Mon Mar 28 2011 Doug Ledford - 3.2.1-1 +- Update to latest upstream version +- Resolves: 691353 + +* Fri Mar 25 2011 Doug Ledford - 3.1.5-1 +- Update to latest upstream stable release +- Update mdadm.rules file to honor noiswmd and nodmraid command line options +- Ghost the directory in /var/run, create /var/run/mdadm in mdmonitor init + script +- Don't report mismatch counts on either raid1 or raid10 +- Check both active and idle arrays during raid check runs +- Move the raid-check script from cron.weekly to /usr/sbin, add a crontab + file to /etc/cron.d and mark it config(noreplace). This way users can + select their own raid-check frequency and have it honored through + upgrades. +- Allow the raid-check script to set the process and io priority of the + thread performing the check in order to preserve responsiveness of the + machine during the check. +- Resolves: 633229, 656620. 679843, 671076, 659933 + +* Tue Feb 08 2011 Fedora Release Engineering - 3.1.3-0.git20100804.2.1 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild + +* Wed Aug 04 2010 Doug Ledford - 3.1.3-0.git20100804.2 +- Add udev patch to not have incremental assembly in two rules files + +* Wed Aug 04 2010 Doug Ledford - 3.1.3-0.git20100804.1 +- Update to latest upstream release (resolves an issue with stale lock + files on the md device map file) + +* Thu Jul 22 2010 Doug Ledford - 3.1.3-0.git20100722.2 +- Remove the glibc-static buildreq and don't build the static mdadm since + we don't install it anyway +- Remove the udev file since adding it was supposed to be a rawhide only change + +* Thu Jul 22 2010 Doug Ledford - 3.1.3-0.git20100722.1 +- Change git date format to the correct format (YYYYMMDD) +- Update to latest upstream push (fixes bz604023) + +* Tue Jul 20 2010 Doug Ledford - 3.1.3-0.git07202010.2 +- Fix racy locking of mapfile (bz616596) + +* Tue Jul 20 2010 Doug Ledford - 3.1.3-0.git07202010.1 +- Update to latest git repo (3.1.2 plus pending changes, fixes bz602457) +- Add in 64-md-raid.rules to compensate for it no longer being in udev + (bz581905) +- Remove mdadm.static as its no longer used in initrd creation + +* Tue Apr 13 2010 Doug Ledford - 3.1.2-10 +- Minor update to mdadm.rules to make anaconda happy + +* Thu Apr 08 2010 Doug Ledford - 3.1.2-9 +- Slight fix on container patch + +* Thu Apr 08 2010 Doug Ledford - 3.1.2-8 +- Updated container patch that also enables mdadm -IRs for imsm devices + +* Tue Apr 06 2010 Doug Ledford - 3.1.2-7 +- Fix up directory in mdmonitor init script so that we restart mdmon like we + are supposed to +- Add a rule to run incremental assembly on containers in case there are + multiple volumes in a container and we only started some of them in the + initramfs +- Make -If work with imsm arrays. We had too restrictive of a test in + sysfs_unique_holder. +- Make incremental assembly of containers act like incremental assembly of + regular devices (aka, --run is needed to start a degraded array) + +* Tue Apr 06 2010 Doug Ledford - 3.1.2-6 +- Typo in new rules file + +* Tue Apr 06 2010 Doug Ledford - 3.1.2-5 +- Enable incremental support for imsm devices + +* Tue Apr 06 2010 Doug Ledford - 3.1.2-4 +- One line fix for ppc64 compiles + +* Tue Apr 06 2010 Doug Ledford - 3.1.2-3 +- Clean up directory mess once and for all +- Add incremental remove support + +* Wed Mar 17 2010 Doug Ledford - 3.1.2-2 +- Add a little more paranoia checking to the RebuildMap code to avoid ever + having the same infinite loop as in bz569019 again even if we change file + locations to somewhere where we can't create a mapfile + +* Tue Mar 16 2010 Doug Ledford - 3.1.2-1 +- Grab latest upstream release instead of git repo snapshot (bz552344, bz572561) +- The lack of /dev/md is causing problems, so add code to mapfile.c to cause + us to create /dev/md if it doesn't exist (bz569019) + +* Tue Feb 23 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.6 +- Newer version of imsm patch that leaves warning, but only when there + actually are too many devices on the command line (bz554974) + +* Sun Feb 21 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.5 +- The uuid patch cause a different problem during assembly, so use a gross + hack to work around the uuid issue that won't break assembly until fixed + properly upstream (bz567132) + +* Sun Feb 21 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.4 +- Fix problem with booting multiple imsm containers when they aren't listed + "just so" in the mdadm.conf file (bz554974) + +* Fri Feb 19 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.3 +- Don't run the raid-check script if the kernel doesn't support + md devices (bz557053) +- Don't report any mismatch_cnt issues on raid1 devices as there are + legitimate reasons why the count may not be 0 and we are getting enough + false positives that it renders the check useless (bz554217, bz547128) + +* Thu Feb 18 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.2 +- Fix s390/ppc64 UUID byte swap issue + +* Wed Feb 17 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.1 +- Update to head of upstream git repo, which contains a significant number + of bug fixes we need (bz543746) + +* Fri Jan 15 2010 Doug Ledford - 3.0.3-3 +- Fix crash when AUTO keyword is in mdadm.conf (bz552342) + +* Tue Dec 01 2009 Doug Ledford - 3.0.3-2 +- Minor tweak to init script for LSB compliance (bz527957) + +* Wed Nov 04 2009 Doug Ledford - 3.0.3-1 +- New upstream release 3.0.3 (bz523320, bz527281) +- Update a couple internal patches +- Drop a patch in that was in Neil's tree for 3.0.3 that we had pulled for + immediate use to resolve a bug +- Drop the endian patch because it no longer applied cleanly and all attempts + to reproduce the original problem as reported in bz510605 failed, even up + to and including downloading the specific package that was reported as + failing in that bug and trying to reproduce with it on both ppc and ppc64 + hardware and with both ppc and ppc64 versions on the 64bit hardware. + Without a reproducer, it is impossible to determine if a rehashed patch + to apply to this code would actually solve the problem, so remove the patch + entirely since the original problem, as reported, was an easy to detect DOA + issue where installing to a raid array was bound to fail on reboot and so + we should be able to quickly and definitively tell if the problem resurfaces. +- Update the mdmonitor init script for LSB compliance (bz527957) +- Link from mdadm.static man page to mdadm man page (bz529314) +- Fix a problem in the raid-check script (bz523000) +- Fix the intel superblock handler so we can test on non-scsi block devices + +* Fri Oct 2 2009 Hans de Goede - 3.0.2-1 +- New upstream release 3.0.2 +- Add a patch fixing mdadm --detail -export segfaults (bz526761, bz523862) +- Add a patch making mdmon store its state under /dev/.mdadm for initrd + mdmon, rootfs mdmon handover +- Restart mdmon from initscript (when running) for rootfs mdmon handover + +* Thu Sep 17 2009 Doug Ledford - 3.0-4 +- Stop some mdmon segfaults (bz523860) + +* Tue Sep 15 2009 Doug Ledford - 3.0-3 +- Update to current head of upstream git repo for various imsm related fixes + (fixes bz523262) +- Fix display of metadata version in output of Detail mode +- Add UUID output to --detail --export (bz523314) + +* Fri Jul 24 2009 Doug Ledford - 3.0-2 +- Improved raid-check script as well as the ability to configure what devices + get checked +- Endian patch for uuid generation + +* Mon Jun 29 2009 Doug Ledford - 3.0-1 +- Remove stale patches already accepted by upstream +- Fix the raid-check script to only try and check a device if it is + checkable +- Update to official mdadm-3.0 version +- Resolves: bz505587, bz505552 + +* Tue May 19 2009 Doug Ledford - 3.0-0.devel3.7 +- Move the mdadm.map file from /dev/md/ to /dev/ so the installer doesn't + need to precreate the /dev/md/ directory in order for incremental + assembly to work + +* Tue May 19 2009 Doug Ledford - 3.0-0.devel3.6 +- Only check raid devices automatically, do not attempt to repair them + during the weekly data scrubbing + +* Fri Mar 20 2009 Doug Ledford - 3.0-0.devel3.5 +- Fix a few issues with the new code to determine when a device gets to + keep its name and when it doesn't + +* Fri Mar 20 2009 Doug Ledford - 3.0-0.devel3.4 +- Change the perms on the udev rules file, it doesn't need to be +x + +* Fri Mar 20 2009 Doug Ledford - 3.0-0.devel3.3 +- Slightly tweak the udev rules to make sure we don't start arrays + while running in rc.sysinit...leave array starting to it instead +- Modify mdadm to put its mapfile in /dev/md instead of /var/run/mdadm + since at startup /var/run/mdadm is read-only by default and this + breaks incremental assembly +- Change how mdadm decides to assemble incremental devices using their + preferred name or a random name to avoid possible conflicts when plugging + a foreign array into a host + +* Wed Mar 18 2009 Doug Ledford - 3.0-0.devel3.2 +- Change around the mdadm udev rules we ship to avoid a udev file conflict + +* Tue Mar 17 2009 Doug Ledford - 3.0-0.devel3.1 +- Update to latest devel release +- Remove the no longer necessary udev patch +- Remove the no longer necessary warn patch +- Remove the no longer necessary alias patch +- Update the mdadm.rules file to only pay attention to device adds, not + changes and to enable incremental assembly +- Add a cron job to run a weekly repair of the array to correct bad sectors +- Resolves: bz474436, bz490972 + +* Wed Feb 25 2009 Fedora Release Engineering - 3.0-0.devel2.2.1 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild + +* Thu Feb 19 2009 Doug Ledford - 3.0-0.devel2.2 +- Readd our old mdadm rules file that does incremental assembly +- Remove the new mdadm rules file from upstream as we already have this in + our udev package (and the one in the udev package already has a bug fixed) + +* Thu Feb 12 2009 Doug Ledford - 3.0-0.devel2.1 +- Update to latest upstream devel release +- Use the udev rules file included with mdadm instead of our own +- Drop all the no longer relevant patches +- Fix a build error in mdopen.c +- Fix the udev rules path in Makefile +- Fix a compile issue with the __le32_to_cpu() macro usage (bad juju to + to operations on the target of the macro as it could get executed + multiple times, and gcc now throws an error on that) +- Add some casts to some print statements to keep gcc from complaining + +* Fri Oct 24 2008 Doug Ledford - 2.6.7.1-1 +- Updated to latest upstream stable release (#466803) +- Change udev rule to not assemble degraded arrays (#453314) +- Fix metadata matching in config file (#466078) +- Fix assembly of raid10 devices (#444237) +- Fix incremental assembly of partitioned raid devices (#447818) + +* Thu Jun 26 2008 Doug Ledford - 2.6.7-1 +- Update to latest upstream version (should resolve #444237) +- Drop incremental patch as it's now part of upstream +- Clean up all the open() calls in the code (#437145) +- Fix the build process to actually generate mdassemble (#446988) +- Update the udev rules to get additional info about arrays being assembled + from the /etc/mdadm.conf file (--scan option) (#447818) +- Update the udev rules to run degraded arrays (--run option) (#452459) + +* Thu Apr 17 2008 Bill Nottingham - 2.6.4-4 +- make /dev/md if necessary in incremental mode (#429604) +- open RAID devices with O_EXCL to avoid racing against other --incremental processes (#433932) + +* Fri Feb 1 2008 Bill Nottingham - 2.6.4-3 +- add a udev rules file for device assembly (#429604) + +* Fri Jan 18 2008 Doug Ledford - 2.6.4-2 +- Bump version and rebuild + +* Fri Oct 19 2007 Doug Ledford - 2.6.4-1 +- Update to latest upstream and remove patches upstream has taken + +* Tue Aug 28 2007 Fedora Release Engineering - 2.6.2-5 +- Rebuild for selinux ppc32 issue. + +* Mon Jul 09 2007 Doug Ledford - 2.6.2-4 +- Oops, if we call -C -e1, minor_version is no longer properly set, fix that + up +- Related: bz230207 + +* Fri Jul 06 2007 Doug Ledford - 2.6.2-3 +- Oops, had to update the file leak patch, missed one thing +- Minor tweak to return codes in init script and add LSB header +- Resolves: bz244582, bz246980 + +* Mon Jul 02 2007 Doug Ledford - 2.6.2-2 +- Fix a file leak issue when mdadm is in monitor mode +- Update mdadm init script so that status will always run and so + return codes are standards compliant +- Fix assembly of version 1 superblock devices +- Make the attempt to create an already running device have a clearer + error message +- Allow the creation of a degraded raid4 array like we allow for raid5 +- Make mdadm actually pay attention to raid4 devices when in monitor mode +- Make the mdmonitor script use daemon() correctly +- Fix a bug where manage mode would not add disks correctly under certain + conditions +- Resolves: bz244582, bz242688, bz230207, bz169516, bz171862, bz171938 +- Resolves: bz174642, bz224272, bz186524 + +* Mon Jul 02 2007 Doug Ledford - 2.6.2-1 +- Update to latest upstream +- Remove requirement for /usr/sbin/sendmail - it's optional and not on by + default, and sendmail isn't *required* for mdadm itself to work, and isn't + even required for the monitoring capability to work, just if you want to + have the monitoring capability do the automatic email thing instead of + run your own program (and if you use the program option of the monitor + capability, your program could email you in a different manner entirely) + +* Mon Apr 16 2007 Doug Ledford - 2.6.1-4 +- More cleanups for merge review process +- Related: bz226134 + +* Wed Apr 11 2007 Doug Ledford - 2.6.1-3 +- Various cleanups as part of merge review process +- Related: bz226134 + +* Sat Mar 31 2007 Doug Ledford - 2.6.1-2 +- Oops, missing a dependency in the Makefile + +* Sat Mar 31 2007 Doug Ledford - 2.6.1-1 +- Update to latest upstream version +- Resolves: bz233422 + +* Fri Jan 26 2007 Doug Ledford - 2.6-1 +- Update to latest upstream version +- Remove the mdmpd daemon entirely. Now that multipath tools from the lvm/dm + packages handles multipath devices well, this is no longer needed. +- Various cleanups in the spec file + +* Thu Nov 09 2006 Doug Ledford - 2.5.4-3 +- Add a fix for the broken printout of array GUID when using the -E --brief + flags + +* Fri Oct 13 2006 Doug Ledford - 2.5.4-2 +- tag present on another branch and can't be forcibly moved + required number bump + +* Fri Oct 13 2006 Doug Ledford - 2.5.4-1 +- Update to 2.5.4 (listed as a bugfix update by upstream) +- Remove previous bitmap patch that's now part of 2.5.4 + +* Sun Oct 8 2006 Doug Ledford - 2.5.3-2 +- Fix a big-endian machine error in the bitmap code (Paul Clements) + +* Mon Aug 7 2006 Doug Ledford - 2.5.3-1 +- Update to 2.5.3 which upstream calls a "bug fix" release + +* Wed Jul 12 2006 Jesse Keating - 2.5.2-1.1 +- rebuild + +* Fri Jul 7 2006 Doug Ledford - 2.5.2-1 +- Update to 2.5.2 +- Remove auto default patch as upstream now has a preferred default auto method + +* Wed Mar 8 2006 Peter Jones - 2.3.1-3 +- fix build on ppc64 + +* Wed Mar 8 2006 Jeremy Katz - 2.3.1-2 +- fix build on ppc + +* Wed Mar 8 2006 Jeremy Katz - 2.3.1-1 +- update to 2.3.1 to fix raid5 (#184284) + +* Fri Feb 10 2006 Jesse Keating - 2.2-1.fc5.2.1 +- bump again for double-long bug on ppc(64) + +* Tue Feb 07 2006 Jesse Keating - 2.2-1.fc5.2 +- rebuilt for new gcc4.1 snapshot and glibc changes + +* Fri Dec 09 2005 Jesse Keating +- rebuilt + +* Mon Dec 05 2005 Warren Togami 2.2-1 +- 2.2 upgrade (#167897) +- disable diet because we don't ship it anymore + and we don't actually use mdassemble now + +* Mon May 16 2005 Doug Ledford 1.11.0-4.fc4 +- Make the mdmonitor init script use the pid-file option, major cleanup + of the script now possible (#134459) + +* Mon May 16 2005 Doug Ledford 1.11.0-3.fc4 +- Put back the obsoletes: raidtools that was present in 1.11.0-1.fc4 + +* Mon May 16 2005 Doug Ledford 1.11.0-2.fc4 +- Change the default auto= mode so it need not be on the command line to + work with udev, however it is still supported on the command line (#132706) +- Add a man page (from Luca Berra) for mdassemble + +* Wed May 11 2005 Doug Ledford - 1.11.0-1.fc4 +- Upgrade to 1.11.0 + +* Wed Apr 27 2005 Jeremy Katz - 1.9.0-3.fc4 +- fix mdmonitor initscript (#144717) + +* Mon Mar 21 2005 Doug Ledford 1.9.0-2 +- Build mdadm.static and mdassemble (static as well) to be used in initrd + images + +* Wed Mar 09 2005 Doug Ledford 1.9.0-1 +- Initial upgrade to 1.9.0 and update of doc files +- Fix an s390 build error + +* Mon Oct 04 2004 Doug Ledford 1.6.0-2 +- Remove /etc/mdadm.conf from the file list. Anaconda will write one out + if it's needed. + +* Fri Oct 01 2004 Doug Ledford 1.6.0-1 +- Update to newer upstream version +- Make mdmpd work on kernels that don't have the event interface patch + +* Fri Jul 30 2004 Dan Walsh 1.5.0-11 +- Create a directory /var/run/mdadm to contain mdadm.pid +- This cleans up SELinux problem + +* Tue Jun 15 2004 Elliot Lee +- rebuilt + +* Sat May 22 2004 Doug Ledford - 1.5.0-9 +- Fix Makefile and build method to satisfy bz #123769 +- Add mdmpd man page, update mdmpd version to 0.3 - bz #117160 +- Make sure mdadm --monitor closes all md device files so that md devices + can be stopped while mdadm is still running - bz #119532 + +* Thu May 20 2004 Jeremy Katz - 1.5.0-8 +- remove unneeded patch, can use --run instead + +* Wed May 19 2004 Jeremy Katz - 1.5.0-7 +- add patch with reallyforce mode on creation to be used by anaconda + +* Wed May 12 2004 Doug Ledford 2.5.0-6 +- Fix a bug in the postun scriptlet related to downgrading to a version + of mdadm that doesn't include the mdmpd daemon. + +* Fri May 07 2004 Doug Ledford 1.5.0-5 +- Disable service mdmpd by default to avoid [Failed] messages on + current 2.6 kernels. Possibly re-enable it by default once the + 2.6 kernels have the md event interface. + +* Thu Apr 22 2004 Doug Ledford 1.5.0-4 +- Update mdmonitor script to start daemon more cleanly +- Repackage mdmpd tarball to include gcc-3.4 changes and to make + mdmpd properly daemonize at startup instead of forking and leaving + the child attached to the terminal. + +* Thu Mar 4 2004 Bill Nottingham 1.5.0-3 +- ship /var/run/mpmpd (#117497) + +* Thu Feb 26 2004 Doug Ledford 1.5.0-2 +- Add a default MAILADDR line to the mdadm.conf file installed by default + (Bugzilla #92447) +- Make it build with gcc-3.4 + +* Mon Feb 23 2004 Doug Ledford 1.5.0-1 +- Update to 1.5.0 (from Matthew J. Galgoci ) + +* Sun Nov 16 2003 Doug Ledford 1.4.0-1 +- fix problem with recovery thread sleeping in mdmpd + +* Fri Nov 14 2003 Doug Ledford +- sync upstream +- add mdmpd package into mdadm package + +* Wed Sep 10 2003 Michael K. Johnson 1.3.0-1 +- sync upstream + +* Tue Mar 11 2003 Michael K. Johnson 1.1.0-1 +- sync upstream + +* Tue Jan 28 2003 Michael K. Johnson 1.0.1-1 +- update for rebuild + +* Wed Dec 25 2002 Tim Powers 1.0.0-8 +- fix references to %%install in the changelog so that it will build + +* Fri Dec 13 2002 Elliot Lee 1.0.0-7 +- Rebuild + +* Fri Jul 12 2002 Michael K. Johnson +- Changed RPM Group to System Environment/Base + +* Wed May 15 2002 Michael K. Johnson +- minor cleanups to the text, conditionalize rm -rf +- added mdmonitor init script + +* Fri May 10 2002 +- update to 1.0.0 +- Set CXFLAGS instead of CFLAGS + +* Sat Apr 6 2002 +- change %%install to use "make install" + +* Fri Mar 15 2002 +- beautification +- made mdadm.conf non-replaceable config +- renamed Copyright to License in the header +- added missing license file +- used macros for file paths + +* Fri Mar 15 2002 Luca Berra +- Added Obsoletes: mdctl +- missingok for configfile + +* Tue Mar 12 2002 NeilBrown +- Add md.4 and mdadm.conf.5 man pages + +* Fri Mar 08 2002 Chris Siebenmann +- builds properly as non-root. + +* Fri Mar 08 2002 Derek Vadala +- updated for 0.7, fixed /usr/share/doc and added manpage + +* Tue Aug 07 2001 Danilo Godec +- initial RPM build