From 44699dc49520467676955da04443a1a6637f0029 Mon Sep 17 00:00:00 2001 From: Daniel P. Berrange Date: Apr 04 2012 10:41:26 +0000 Subject: Split config files & daemon off from main daemon RPM --- diff --git a/libvirt.spec b/libvirt.spec index 9b444f9..aa364d5 100644 --- a/libvirt.spec +++ b/libvirt.spec @@ -268,109 +268,21 @@ Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root URL: http://libvirt.org/ -# All runtime requirements for the libvirt package (runtime requrements -# for subpackages are listed later in those subpackages) - -# The client side, i.e. shared libs and virsh are in a subpackage -Requires: %{name}-client = %{version}-%{release} - -# Used by many of the drivers, so turn it on whenever the -# daemon is present %if %{with_libvirtd} -# for modprobe of pci devices -Requires: module-init-tools -# for /sbin/ip & /sbin/tc -Requires: iproute -%if %{with_avahi} -Requires: avahi-libs -%endif -%endif +Requires: libvirt-daemon = %{version}-%{release} %if %{with_network} -Requires: dnsmasq >= 2.41 -Requires: radvd -%endif -%if %{with_network} || %{with_nwfilter} -Requires: iptables -Requires: iptables-ipv6 +Requires: libvirt-daemon-config-network = %{version}-%{release} %endif %if %{with_nwfilter} -Requires: ebtables -%endif -# needed for device enumeration -%if %{with_hal} -Requires: hal -%endif -%if %{with_udev} -Requires: udev >= 145 -%endif -%if %{with_polkit} -%if 0%{?fedora} >= 12 || 0%{?rhel} >=6 -Requires: polkit >= 0.93 -%else -Requires: PolicyKit >= 0.6 -%endif -%endif -%if %{with_storage_fs} -Requires: nfs-utils -# For mkfs -Requires: util-linux-ng -# For pool-build probing for existing pools -BuildRequires: libblkid-devel >= 2.17 -# For glusterfs -%if 0%{?fedora} >= 11 -Requires: glusterfs-client >= 2.0.1 -%endif -%endif -%if %{with_qemu} -# From QEMU RPMs -Requires: /usr/bin/qemu-img -# For image compression -Requires: gzip -Requires: bzip2 -Requires: lzop -Requires: xz -%else -%if %{with_xen} -# From Xen RPMs -Requires: /usr/sbin/qcow-create -%endif -%endif -%if %{with_storage_lvm} -# For LVM drivers -Requires: lvm2 -%endif -%if %{with_storage_iscsi} -# For ISCSI driver -Requires: iscsi-initiator-utils -%endif -%if %{with_storage_disk} -# For disk driver -Requires: parted -Requires: device-mapper -%endif -%if %{with_storage_mpath} -# For multipath support -Requires: device-mapper -%endif -%if %{with_cgconfig} -Requires: libcgroup -%endif -%ifarch %{ix86} x86_64 ia64 -# For virConnectGetSysinfo -Requires: dmidecode +Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %endif -# For service management -%if %{with_systemd} -Requires(post): systemd-units -Requires(post): systemd-sysv -Requires(preun): systemd-units -Requires(postun): systemd-units -%endif -%if %{with_numad} -Requires: numad +# XXX when we turn on driver modules, we need to add +# deps on each driver (Requires: libvirt-daemon-drv-qemu) %endif +Requires: libvirt-client = %{version}-%{release} -# All build-time requirements +# All build-time requirements. Run-time requirements are +# listed against each sub-RPM %if 0%{?enable_autotools} BuildRequires: autoconf BuildRequires: automake @@ -545,6 +457,137 @@ Group: Development/Libraries Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. +%if %{with_libvirtd} +%package daemon +Summary: Server side daemon and supporting files for libvirt library +Group: Development/Libraries + +# All runtime requirements for the libvirt package (runtime requrements +# for subpackages are listed later in those subpackages) + +# The client side, i.e. shared libs and virsh are in a subpackage +Requires: %{name}-client = %{version}-%{release} + +# for modprobe of pci devices +Requires: module-init-tools +# for /sbin/ip & /sbin/tc +Requires: iproute +%if %{with_avahi} +Requires: avahi-libs +%endif +%if %{with_network} +Requires: dnsmasq >= 2.41 +Requires: radvd +%endif +%if %{with_network} || %{with_nwfilter} +Requires: iptables +Requires: iptables-ipv6 +%endif +%if %{with_nwfilter} +Requires: ebtables +%endif +# needed for device enumeration +%if %{with_hal} +Requires: hal +%endif +%if %{with_udev} +Requires: udev >= 145 +%endif +%if %{with_polkit} +%if 0%{?fedora} >= 12 || 0%{?rhel} >=6 +Requires: polkit >= 0.93 +%else +Requires: PolicyKit >= 0.6 +%endif +%endif +%if %{with_storage_fs} +Requires: nfs-utils +# For mkfs +Requires: util-linux-ng +# For pool-build probing for existing pools +BuildRequires: libblkid-devel >= 2.17 +# For glusterfs +%if 0%{?fedora} >= 11 +Requires: glusterfs-client >= 2.0.1 +%endif +%endif +%if %{with_qemu} +# From QEMU RPMs +Requires: /usr/bin/qemu-img +# For image compression +Requires: gzip +Requires: bzip2 +Requires: lzop +Requires: xz +%else +%if %{with_xen} +# From Xen RPMs +Requires: /usr/sbin/qcow-create +%endif +%endif +%if %{with_storage_lvm} +# For LVM drivers +Requires: lvm2 +%endif +%if %{with_storage_iscsi} +# For ISCSI driver +Requires: iscsi-initiator-utils +%endif +%if %{with_storage_disk} +# For disk driver +Requires: parted +Requires: device-mapper +%endif +%if %{with_storage_mpath} +# For multipath support +Requires: device-mapper +%endif +%if %{with_cgconfig} +Requires: libcgroup +%endif +%ifarch %{ix86} x86_64 ia64 +# For virConnectGetSysinfo +Requires: dmidecode +%endif +# For service management +%if %{with_systemd} +Requires(post): systemd-units +Requires(post): systemd-sysv +Requires(preun): systemd-units +Requires(postun): systemd-units +%endif +%if %{with_numad} +Requires: numad +%endif + +%description daemon +Server side daemon required to manage the virtualization capabilities +of recent versions of Linux. Requires a hypervisor specific sub-RPM +for specific drivers. + +%if %{with_network} +%package daemon-config-network +Summary: Default configuration files for the libvirtd daemon +Group: Development/Libraries + +Requires: libvirt-daemon = %{version}-%{release} + +%description daemon-config-network +Default configuration files for setting up NAT based networking +%endif + +%if %{with_nwfilter} +%package daemon-config-nwfilter +Summary: Network filter configuration files for the libvirtd daemon +Group: Development/Libraries + +Requires: libvirt-daemon = %{version}-%{release} + +%description daemon-config-nwfilter +Network filter configuration files for cleaning guest traffic +%endif +%endif + %package client Summary: Client side library and utilities of the libvirt library Group: Development/Libraries @@ -899,7 +942,8 @@ do done make check -%pre +%if %{with_libvirtd} +%pre daemon %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6 # Normally 'setup' adds this in /etc/passwd, but this is # here for case of upgrades from earlier Fedora/RHEL. This @@ -911,22 +955,9 @@ getent passwd qemu >/dev/null || \ -c "qemu user" qemu %endif -%post +%post daemon -%if %{with_libvirtd} %if %{with_network} -# We want to install the default network for initial RPM installs -# or on the first upgrade from a non-network aware libvirt only. -# We check this by looking to see if the daemon is already installed -if ! /sbin/chkconfig libvirtd && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml -then - UUID=`/usr/bin/uuidgen` - sed -e "s,,\n $UUID," \ - < %{_datadir}/libvirt/networks/default.xml \ - > %{_sysconfdir}/libvirt/qemu/networks/default.xml - ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml -fi - # All newly defined networks will have a mac address for the bridge # auto-generated, but networks already existing at the time of upgrade # will not. We need to go through all the network configs, look for @@ -990,10 +1021,8 @@ if [ "$1" -ge "1" ]; then /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif -%endif -%preun -%if %{with_libvirtd} +%preun daemon %if %{with_systemd} if [ $1 -eq 0 ] ; then # Package removal, not upgrade @@ -1006,10 +1035,8 @@ if [ $1 = 0 ]; then /sbin/chkconfig --del libvirtd fi %endif -%endif -%postun -%if %{with_libvirtd} +%postun daemon %if %{with_systemd} /bin/systemctl daemon-reload >/dev/null 2>&1 || : if [ $1 -ge 1 ] ; then @@ -1017,6 +1044,17 @@ if [ $1 -ge 1 ] ; then /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : fi %endif + +%if %{with_network} +%post daemon-config-network +if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then + UUID=`/usr/bin/uuidgen` + sed -e "s,,\n $UUID," \ + < %{_datadir}/libvirt/networks/default.xml \ + > %{_sysconfdir}/libvirt/qemu/networks/default.xml + ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml +fi +%endif %endif %if %{with_libvirtd} @@ -1065,10 +1103,27 @@ fi /bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || : %endif -%if %{with_libvirtd} %files %defattr(-, root, root) +%files docs +%defattr(-, root, root) +# Website +%dir %{_datadir}/doc/libvirt-docs-%{version} +%dir %{_datadir}/doc/libvirt-docs-%{version}/html +%{_datadir}/doc/libvirt-docs-%{version}/html/* + +# API docs +%dir %{_datadir}/gtk-doc/html/libvirt/ +%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp +%doc %{_datadir}/gtk-doc/html/libvirt/*.html +%doc %{_datadir}/gtk-doc/html/libvirt/*.png +%doc %{_datadir}/gtk-doc/html/libvirt/*.css + +%if %{with_libvirtd} +%files daemon +%defattr(-, root, root) + %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ @@ -1079,7 +1134,6 @@ fi %endif %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ -%{_sysconfdir}/libvirt/nwfilter/*.xml %{_sysconfdir}/rc.d/init.d/libvirtd %if %{with_systemd} @@ -1185,21 +1239,18 @@ rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd %attr(0755, root, root) %{_sbindir}/libvirtd %{_mandir}/man8/libvirtd.8* -%endif -%files docs +%if %{with_network} +%files daemon-config-network %defattr(-, root, root) -# Website -%dir %{_datadir}/doc/libvirt-docs-%{version} -%dir %{_datadir}/doc/libvirt-docs-%{version}/html -%{_datadir}/doc/libvirt-docs-%{version}/html/* +%endif -# API docs -%dir %{_datadir}/gtk-doc/html/libvirt/ -%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp -%doc %{_datadir}/gtk-doc/html/libvirt/*.html -%doc %{_datadir}/gtk-doc/html/libvirt/*.png -%doc %{_datadir}/gtk-doc/html/libvirt/*.css +%if %{with_nwfilter} +%files daemon-config-nwfilter +%defattr(-, root, root) +%{_sysconfdir}/libvirt/nwfilter/*.xml +%endif +%endif %if %{with_sanlock} %files lock-sanlock