# -*- rpm-spec -*-

# This spec file assumes you are building on a Fedora or RHEL version

# that's still supported by the vendor. It may work on other distros

# or versions, but no effort will be made to ensure that going forward.

%define min_rhel 8

%define min_fedora 33

%define arches_qemu_kvm         %{ix86} x86_64 %{power64} %{arm} aarch64 s390x

%if 0%{?rhel}

    %if 0%{?rhel} > 8

        %define arches_qemu_kvm     x86_64 aarch64 s390x

    %else

        %define arches_qemu_kvm     x86_64 %{power64} aarch64 s390x

    %endif

%endif

%define arches_64bit            x86_64 %{power64} aarch64 s390x riscv64

%define arches_x86              %{ix86} x86_64

%define arches_systemtap_64bit  %{arches_64bit}

%define arches_dmidecode        %{arches_x86}

%define arches_xen              %{arches_x86} aarch64

%if 0%{?fedora} >= 36

    %define arches_xen              x86_64 aarch64

%endif

%define arches_vbox             %{arches_x86}

%define arches_ceph             %{arches_64bit}

%define arches_zfs              %{arches_x86} %{power64} %{arm}

%define arches_numactl          %{arches_x86} %{power64} aarch64 s390x

%define arches_numad            %{arches_x86} %{power64} aarch64

# The hypervisor drivers that run in libvirtd

%define with_qemu          0%{!?_without_qemu:1}

%define with_lxc           0%{!?_without_lxc:1}

%define with_libxl         0%{!?_without_libxl:1}

%define with_vbox          0%{!?_without_vbox:1}

%ifarch %{arches_qemu_kvm}

    %define with_qemu_kvm      %{with_qemu}

%else

    %define with_qemu_kvm      0

%endif

%define with_qemu_tcg      %{with_qemu}

# RHEL disables TCG on all architectures

%if 0%{?rhel}

    %define with_qemu_tcg 0

%endif

%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}

    %define with_qemu 0

%endif

# Then the hypervisor drivers that run outside libvirtd, in libvirt.so

%define with_openvz        0%{!?_without_openvz:1}

%define with_vmware        0%{!?_without_vmware:1}

%define with_esx           0%{!?_without_esx:1}

%define with_hyperv        0%{!?_without_hyperv:1}

# Then the secondary host drivers, which run inside libvirtd

%define with_storage_rbd      0%{!?_without_storage_rbd:1}

%if 0%{?fedora}

    %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1}

%else

    %define with_storage_sheepdog 0

%endif

%define with_storage_gluster 0%{!?_without_storage_gluster:1}

%if 0%{?rhel}

    # Glusterfs has been dropped in RHEL-9, and before that

    # was only enabled on arches where KVM exists

    %if 0%{?rhel} > 8

        %define with_storage_gluster 0

    %else

        %ifnarch %{arches_qemu_kvm}

            %define with_storage_gluster 0

        %endif

    %endif

%endif

# Fedora has zfs-fuse

%if 0%{?fedora}

    %define with_storage_zfs      0%{!?_without_storage_zfs:1}

%else

    %define with_storage_zfs      0

%endif

%define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1}

# libiscsi has been dropped in RHEL-9

%if 0%{?rhel} > 8

    %define with_storage_iscsi_direct 0

%endif

# Other optional features

%define with_numactl          0%{!?_without_numactl:1}

# A few optional bits off by default, we enable later

%define with_fuse             0

%define with_sanlock          0

%define with_numad            0

%define with_firewalld_zone   0

%define with_netcf            0

%define with_libssh2          0

%define with_wireshark        0

%define with_libssh           0

%define with_dmidecode        0

# Finally set the OS / architecture specific special cases

# Architecture-dependent features

%ifnarch %{arches_xen}

    %define with_libxl 0

%endif

%ifnarch %{arches_vbox}

    %define with_vbox 0

%endif

%ifnarch %{arches_numactl}

    %define with_numactl 0

%endif

%ifnarch %{arches_zfs}

    %define with_storage_zfs 0

%endif

%ifnarch %{arches_ceph}

    %define with_storage_rbd 0

%endif

# RHEL doesn't ship many hypervisor drivers

%if 0%{?rhel}

    %define with_openvz 0

    %define with_vbox 0

    %define with_vmware 0

    %define with_libxl 0

    %define with_hyperv 0

    %define with_vz 0

    %define with_lxc 0

%endif

%define with_firewalld_zone 0%{!?_without_firewalld_zone:1}

%if (0%{?fedora} && 0%{?fedora} < 34) || (0%{?rhel} && 0%{?rhel} < 9)

    %define with_netcf 0%{!?_without_netcf:1}

%endif

# fuse is used to provide virtualized /proc for LXC

%if %{with_lxc}

    %define with_fuse      0%{!?_without_fuse:1}

%endif

# Enable sanlock library for lock management with QEMU

# Sanlock is available only on arches where kvm is available for RHEL

%if 0%{?fedora}

    %define with_sanlock 0%{!?_without_sanlock:1}

%endif

%if 0%{?rhel}

    %ifarch %{arches_qemu_kvm}

        %define with_sanlock 0%{!?_without_sanlock:1}

    %endif

%endif

# Enable libssh2 transport for new enough distros

%if 0%{?fedora}

    %define with_libssh2 0%{!?_without_libssh2:1}

%endif

# Enable wireshark plugins for all distros

%define with_wireshark 0%{!?_without_wireshark:1}

%define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan

# Enable libssh transport for all distros

%define with_libssh 0%{!?_without_libssh:1}

%if %{with_qemu} || %{with_lxc}

# numad is used to manage the CPU and memory placement dynamically,

# it's not available on many non-x86 architectures.

    %ifarch %{arches_numad}

        %define with_numad    0%{!?_without_numad:1}

    %endif

%endif

%ifarch %{arches_dmidecode}

    %define with_dmidecode 0%{!?_without_dmidecode:1}

%endif

%define with_modular_daemons 0

%if 0%{?fedora} >= 35 || 0%{?rhel} >= 9

    %define with_modular_daemons 1

%endif

# Force QEMU to run as non-root

%define qemu_user  qemu

%define qemu_group  qemu

# Locations for QEMU data

%define qemu_moddir %{_libdir}/qemu

%define qemu_datadir %{_datadir}/qemu

# RHEL releases provide stable tool chains and so it is safe to turn

# compiler warning into errors without being worried about frequent

# changes in reported warnings

%if 0%{?rhel}

    %define enable_werror -Dwerror=true

%else

    %define enable_werror -Dwerror=false -Dgit_werror=disabled

%endif

%define tls_priority "@LIBVIRT,SYSTEM"

# libvirt 8.1.0 stops distributing any sysconfig files.

# If the user has customized their sysconfig file,

# the RPM upgrade path will rename it to .rpmsave

# because the file is no longer managed by RPM.

# To prevent a regression we rename it back after the

# transaction to preserve the user's modifications

%define libvirt_sysconfig_pre() \

    for sc in %{?*} ; do \

        test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \

        mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}.rpmsave.old" ; \

    done \

    %{nil}

%define libvirt_sysconfig_posttrans() \

    for sc in %{?*} ; do \

        test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \

        mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}" ; \

    done \

    %{nil}

Summary: Library providing a simple virtualization API

Name: libvirt

Version: 8.5.0

Release: 1%{?dist}

License: LGPLv2+

URL: https://libvirt.org/

%if %(echo %{version} | grep -q "\.0$"; echo $?) == 1

    %define mainturl stable_updates/

%endif

Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-config-network = %{version}-%{release}

Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}

%if %{with_libxl}

Requires: libvirt-daemon-driver-libxl = %{version}-%{release}

%endif

%if %{with_lxc}

Requires: libvirt-daemon-driver-lxc = %{version}-%{release}

%endif

%if %{with_qemu}

Requires: libvirt-daemon-driver-qemu = %{version}-%{release}

%endif

# We had UML driver, but we've removed it.

Obsoletes: libvirt-daemon-driver-uml <= 5.0.0

Obsoletes: libvirt-daemon-uml <= 5.0.0

%if %{with_vbox}

Requires: libvirt-daemon-driver-vbox = %{version}-%{release}

%endif

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-client = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

# All build-time requirements. Run-time requirements are

# listed against each sub-RPM

BuildRequires: python3-docutils

BuildRequires: gcc

BuildRequires: meson >= 0.54.0

BuildRequires: ninja-build

BuildRequires: git

BuildRequires: perl-interpreter

BuildRequires: python3

%if %{with_libxl}

BuildRequires: xen-devel

%endif

BuildRequires: glib2-devel >= 2.56

BuildRequires: libxml2-devel

BuildRequires: libxslt

BuildRequires: readline-devel

BuildRequires: bash-completion >= 2.0

BuildRequires: gettext

BuildRequires: libtasn1-devel

BuildRequires: gnutls-devel

BuildRequires: libattr-devel

# For pool-build probing for existing pools

BuildRequires: libblkid-devel >= 2.17

# for augparse, optionally used in testing

BuildRequires: augeas

BuildRequires: systemd-devel >= 185

BuildRequires: libpciaccess-devel >= 0.10.9

BuildRequires: yajl-devel

%if %{with_sanlock}

BuildRequires: sanlock-devel >= 2.4

%endif

BuildRequires: libpcap-devel >= 1.5.0

BuildRequires: libnl3-devel

BuildRequires: libselinux-devel

BuildRequires: iptables

BuildRequires: ebtables

BuildRequires: module-init-tools

BuildRequires: cyrus-sasl-devel

BuildRequires: polkit >= 0.112

# For mount/umount in FS driver

BuildRequires: util-linux

%if %{with_qemu}

# For managing ACLs

BuildRequires: libacl-devel

# From QEMU RPMs

BuildRequires: /usr/bin/qemu-img

%endif

# For LVM drivers

BuildRequires: lvm2

# For pool type=iscsi

BuildRequires: iscsi-initiator-utils

%if %{with_storage_iscsi_direct}

# For pool type=iscsi-direct

BuildRequires: libiscsi-devel

%endif

# For disk driver

BuildRequires: parted-devel

# For Multipath support

BuildRequires: device-mapper-devel

%if %{with_storage_rbd}

BuildRequires: librados-devel

BuildRequires: librbd-devel

%endif

%if %{with_storage_gluster}

BuildRequires: glusterfs-api-devel >= 3.4.1

BuildRequires: glusterfs-devel >= 3.4.1

%endif

%if %{with_storage_sheepdog}

BuildRequires: sheepdog

%endif

%if %{with_numactl}

# For QEMU/LXC numa info

BuildRequires: numactl-devel

%endif

BuildRequires: libcap-ng-devel >= 0.5.0

%if %{with_fuse}

BuildRequires: fuse-devel >= 2.8.6

%endif

%if %{with_libssh2}

BuildRequires: libssh2-devel >= 1.3.0

%endif

%if %{with_netcf}

BuildRequires: netcf-devel >= 0.2.2

%endif

%if %{with_esx}

BuildRequires: libcurl-devel

%endif

%if %{with_hyperv}

BuildRequires: libwsman-devel >= 2.6.3

%endif

BuildRequires: audit-libs-devel

# we need /usr/sbin/dtrace

BuildRequires: systemtap-sdt-devel

# For mount/umount in FS driver

BuildRequires: util-linux

# For showmount in FS driver (netfs discovery)

BuildRequires: nfs-utils

# Fedora build root suckage

BuildRequires: gawk

# For storage wiping with different algorithms

BuildRequires: scrub

%if %{with_numad}

BuildRequires: numad

%endif

%if %{with_wireshark}

BuildRequires: wireshark-devel

%endif

%if %{with_libssh}

BuildRequires: libssh-devel >= 0.7.0

%endif

BuildRequires: rpcgen

BuildRequires: libtirpc-devel

# Needed for the firewalld_reload macro

%if %{with_firewalld_zone}

BuildRequires: firewalld-filesystem

%endif

%description

Libvirt is a C toolkit to interact with the virtualization capabilities

of recent versions of Linux (and other OSes). The main package includes

the libvirtd server exporting the virtualization support.

%package docs

Summary: API reference and website documentation

%description docs

Includes the API reference for the libvirt C library, and a complete

copy of the libvirt.org website documentation.

%package daemon

Summary: Server side daemon and supporting files for libvirt library

# All runtime requirements for the libvirt package (runtime requrements

# for subpackages are listed later in those subpackages)

# The client side, i.e. shared libs are in a subpackage

Requires: %{name}-libs = %{version}-%{release}

# netcat is needed on the server side so that clients that have

# libvirt < 6.9.0 can connect, but newer versions will prefer

# virt-ssh-helper. Making this a Recommends means that it gets

# installed by default, but can still be removed if compatibility

# with old clients is not required

Recommends: /usr/bin/nc

# for modprobe of pci devices

Requires: module-init-tools

# for /sbin/ip

Requires: iproute

# for /sbin/tc

Requires: iproute-tc

Requires: polkit >= 0.112

%if %{with_dmidecode}

# For virConnectGetSysinfo

Requires: dmidecode

%endif

# For service management

Requires(post): /usr/bin/systemctl

%if %{with_numad}

Requires: numad

%endif

# libvirtd depends on 'messagebus' service

Requires: dbus

# For uid creation during pre

Requires(pre): shadow-utils

# Needed by /usr/libexec/libvirt-guests.sh script.

Requires: gettext

# Ensure smooth upgrades

Obsoletes: libvirt-admin < 7.3.0

Provides: libvirt-admin = %{version}-%{release}

Obsoletes: libvirt-bash-completion < 7.3.0

%description daemon

Server side daemon required to manage the virtualization capabilities

of recent versions of Linux. Requires a hypervisor specific sub-RPM

for specific drivers.

%package daemon-config-network

Summary: Default configuration files for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

%description daemon-config-network

Default configuration files for setting up NAT based networking

%package daemon-config-nwfilter

Summary: Network filter configuration files for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

%description daemon-config-nwfilter

Network filter configuration files for cleaning guest traffic

%package daemon-driver-network

Summary: Network driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: dnsmasq >= 2.41

Requires: iptables

%description daemon-driver-network

The network driver plugin for the libvirtd daemon, providing

an implementation of the virtual network APIs using the Linux

bridge capabilities.

%package daemon-driver-nwfilter

Summary: Nwfilter driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: iptables

Requires: ebtables

%description daemon-driver-nwfilter

The nwfilter driver plugin for the libvirtd daemon, providing

an implementation of the firewall APIs using the ebtables,

iptables and ip6tables capabilities

%package daemon-driver-nodedev

Summary: Nodedev driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

# needed for device enumeration

Requires: systemd >= 185

# For managing persistent mediated devices

Requires: mdevctl

%description daemon-driver-nodedev

The nodedev driver plugin for the libvirtd daemon, providing

an implementation of the node device APIs using the udev

capabilities.

%package daemon-driver-interface

Summary: Interface driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

%if %{with_netcf}

Requires: netcf-libs >= 0.2.2

%endif

%description daemon-driver-interface

The interface driver plugin for the libvirtd daemon, providing

an implementation of the host network interface APIs.

%package daemon-driver-secret

Summary: Secret driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-secret

The secret driver plugin for the libvirtd daemon, providing

an implementation of the secret key APIs.

%package daemon-driver-storage-core

Summary: Storage driver plugin including base backends for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: nfs-utils

# For mkfs

Requires: util-linux

%if %{with_qemu}

# From QEMU RPMs

Requires: /usr/bin/qemu-img

%endif

%if !%{with_storage_rbd}

Obsoletes: libvirt-daemon-driver-storage-rbd < %{version}-%{release}

%endif

%description daemon-driver-storage-core

The storage driver plugin for the libvirtd daemon, providing

an implementation of the storage APIs using files, local disks, LVM, SCSI,

iSCSI, and multipath storage.

%package daemon-driver-storage-logical

Summary: Storage driver plugin for lvm volumes

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: lvm2

%description daemon-driver-storage-logical

The storage driver backend adding implementation of the storage APIs for block

volumes using lvm.

%package daemon-driver-storage-disk

Summary: Storage driver plugin for disk

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: parted

Requires: device-mapper

%description daemon-driver-storage-disk

The storage driver backend adding implementation of the storage APIs for block

volumes using the host disks.

%package daemon-driver-storage-scsi

Summary: Storage driver plugin for local scsi devices

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-storage-scsi

The storage driver backend adding implementation of the storage APIs for scsi

host devices.

%package daemon-driver-storage-iscsi

Summary: Storage driver plugin for iscsi

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: iscsi-initiator-utils

%description daemon-driver-storage-iscsi

The storage driver backend adding implementation of the storage APIs for iscsi

volumes using the host iscsi stack.

%if %{with_storage_iscsi_direct}

%package daemon-driver-storage-iscsi-direct

Summary: Storage driver plugin for iscsi-direct

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-storage-iscsi-direct

The storage driver backend adding implementation of the storage APIs for iscsi

volumes using libiscsi direct connection.

%endif

%package daemon-driver-storage-mpath

Summary: Storage driver plugin for multipath volumes

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: device-mapper

%description daemon-driver-storage-mpath

The storage driver backend adding implementation of the storage APIs for

multipath storage using device mapper.

%if %{with_storage_gluster}

%package daemon-driver-storage-gluster

Summary: Storage driver plugin for gluster

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

    %if 0%{?fedora}

Requires: glusterfs-client >= 2.0.1

    %endif

    %if (0%{?fedora} || 0%{?with_storage_gluster})

Requires: /usr/sbin/gluster

    %endif

%description daemon-driver-storage-gluster

The storage driver backend adding implementation of the storage APIs for gluster

volumes using libgfapi.

%endif

%if %{with_storage_rbd}

%package daemon-driver-storage-rbd

Summary: Storage driver plugin for rbd

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-storage-rbd

The storage driver backend adding implementation of the storage APIs for rbd

volumes using the ceph protocol.

%endif

%if %{with_storage_sheepdog}

%package daemon-driver-storage-sheepdog

Summary: Storage driver plugin for sheepdog

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: sheepdog

%description daemon-driver-storage-sheepdog

The storage driver backend adding implementation of the storage APIs for

sheepdog volumes using.

%endif

%if %{with_storage_zfs}

%package daemon-driver-storage-zfs

Summary: Storage driver plugin for ZFS

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

# Support any conforming implementation of zfs

Requires: /sbin/zfs

Requires: /sbin/zpool

%description daemon-driver-storage-zfs

The storage driver backend adding implementation of the storage APIs for

ZFS volumes.

%endif

%package daemon-driver-storage

Summary: Storage driver plugin including all backends for the libvirtd daemon

Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}

Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release}

Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release}

Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release}

Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release}

Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release}

%if %{with_storage_iscsi_direct}

Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release}

%endif

%if %{with_storage_gluster}

Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release}

%endif

%if %{with_storage_rbd}

Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release}

%endif

%if %{with_storage_sheepdog}

Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release}

%endif

%if %{with_storage_zfs}

Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release}

%endif

%description daemon-driver-storage

The storage driver plugin for the libvirtd daemon, providing

an implementation of the storage APIs using LVM, iSCSI,

parted and more.

%if %{with_qemu}

%package daemon-driver-qemu

Summary: QEMU driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Requires: /usr/bin/qemu-img

# For image compression

Requires: gzip

Requires: bzip2

Requires: lzop

Requires: xz

Requires: systemd-container

Requires: swtpm-tools

%description daemon-driver-qemu

The qemu driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

QEMU

%endif

%if %{with_lxc}

%package daemon-driver-lxc

Summary: LXC driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

# There really is a hard cross-driver dependency here

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: systemd-container

%description daemon-driver-lxc

The LXC driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

the Linux kernel

%endif

%if %{with_vbox}

%package daemon-driver-vbox

Summary: VirtualBox driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-vbox

The vbox driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

VirtualBox

%endif

%if %{with_libxl}

%package daemon-driver-libxl

Summary: Libxl driver plugin for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

Obsoletes: libvirt-daemon-driver-xen < 4.3.0

%description daemon-driver-libxl

The Libxl driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

Libxl

%endif

%if %{with_qemu_tcg}

%package daemon-qemu

Summary: Server side daemon & driver required to run QEMU guests

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-qemu = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: qemu

%description daemon-qemu

Server side daemon and driver required to manage the virtualization

capabilities of the QEMU TCG emulators

%endif

%if %{with_qemu_kvm}

%package daemon-kvm

Summary: Server side daemon & driver required to run KVM guests

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-qemu = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: qemu-kvm

%description daemon-kvm

Server side daemon and driver required to manage the virtualization

capabilities of the KVM hypervisor

%endif

%if %{with_lxc}

%package daemon-lxc

Summary: Server side daemon & driver required to run LXC guests

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-lxc = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

%description daemon-lxc

Server side daemon and driver required to manage the virtualization

capabilities of LXC

%endif

%if %{with_libxl}

%package daemon-xen

Summary: Server side daemon & driver required to run XEN guests

Requires: libvirt-daemon = %{version}-%{release}

    %if %{with_libxl}

Requires: libvirt-daemon-driver-libxl = %{version}-%{release}

    %endif

Requires: libvirt-daemon-driver-interface = %{version}-%{release}