# -*- rpm-spec -*-

# This spec file assumes you are building on a Fedora or RHEL version

# that's still supported by the vendor: that means Fedora 23 or newer,

# or RHEL 6 or newer. It may need some tweaks for other distros.

# If neither fedora nor rhel was defined, try to guess them from dist

%if (0%{?fedora} && 0%{?fedora} >= 23) || (0%{?rhel} && 0%{?rhel} >= 6)

    %define supported_platform 1

%else

    %define supported_platform 0

%endif

# Default to skipping autoreconf.  Distros can change just this one line

# (or provide a command-line override) if they backport any patches that

# touch configure.ac or Makefile.am.

%{!?enable_autotools:%global enable_autotools 0}

# The hypervisor drivers that run in libvirtd

%define with_xen           0%{!?_without_xen:1}

%define with_qemu          0%{!?_without_qemu:1}

%define with_lxc           0%{!?_without_lxc:1}

%define with_uml           0%{!?_without_uml:1}

%define with_libxl         0%{!?_without_libxl:1}

%define with_vbox          0%{!?_without_vbox:1}

%define with_qemu_tcg      %{with_qemu}

%define qemu_kvm_arches %{ix86} x86_64

%if 0%{?fedora}

    %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64

%endif

%if 0%{?rhel}

    %define with_qemu_tcg 0

    %define qemu_kvm_arches x86_64

    %if 0%{?rhel} >= 7

        %define qemu_kvm_arches x86_64 %{power64}

    %endif

%endif

%ifarch %{qemu_kvm_arches}

    %define with_qemu_kvm      %{with_qemu}

%else

    %define with_qemu_kvm      0

%endif

%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}

    %define with_qemu 0

%endif

# Then the hypervisor drivers that run outside libvirtd, in libvirt.so

%define with_openvz        0%{!?_without_openvz:1}

%define with_vmware        0%{!?_without_vmware:1}

%define with_phyp          0%{!?_without_phyp:1}

%define with_esx           0%{!?_without_esx:1}

%define with_hyperv        0%{!?_without_hyperv:1}

# Then the secondary host drivers, which run inside libvirtd

%if 0%{?fedora} || 0%{?rhel} >= 7

    %define with_storage_rbd      0%{!?_without_storage_rbd:1}

%else

    %define with_storage_rbd      0

%endif

%if 0%{?fedora}

    %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1}

%else

    %define with_storage_sheepdog 0

%endif

%define with_storage_gluster 0%{!?_without_storage_gluster:1}

%define with_numactl          0%{!?_without_numactl:1}

# A few optional bits off by default, we enable later

%define with_fuse          0%{!?_without_fuse:0}

%define with_cgconfig      0%{!?_without_cgconfig:0}

%define with_sanlock       0%{!?_without_sanlock:0}

%define with_systemd       0%{!?_without_systemd:0}

%define with_numad         0%{!?_without_numad:0}

%define with_firewalld     0%{!?_without_firewalld:0}

%define with_libssh2       0%{!?_without_libssh2:0}

%define with_wireshark     0%{!?_without_wireshark:0}

%define with_libssh        0%{!?_without_libssh:0}

%define with_pm_utils      1

# Finally set the OS / architecture specific special cases

# Xen is available only on i386 x86_64 ia64

%ifnarch %{ix86} x86_64 ia64

    %define with_xen 0

    %define with_libxl 0

%endif

# vbox is available only on i386 x86_64

%ifnarch %{ix86} x86_64

    %define with_vbox 0

%endif

# Numactl is not available on s390[x] and ARM

%ifarch s390 s390x %{arm}

    %define with_numactl 0

%endif

# libgfapi is built only on x86_64 on rhel

%ifnarch x86_64

    %if 0%{?rhel}

        %define with_storage_gluster 0

    %endif

%endif

# librados and librbd are built only on x86_64 on rhel

%ifnarch x86_64

    %if 0%{?rhel} >= 7

        %define with_storage_rbd 0

    %endif

%endif

# RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,

# VMware, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),

# or HyperV.

%if 0%{?rhel}

    %define with_openvz 0

    %define with_vbox 0

    %define with_uml 0

    %define with_phyp 0

    %define with_vmware 0

    %define with_xenapi 0

    %define with_libxl 0

    %define with_hyperv 0

    %define with_vz 0

%endif

# Fedora 17 / RHEL-7 are first where we use systemd. Although earlier

# Fedora has systemd, libvirt still used sysvinit there.

%if 0%{?fedora} || 0%{?rhel} >= 7

    %define with_systemd 1

    %define with_pm_utils 0

%endif

# Fedora 18 / RHEL-7 are first where firewalld support is enabled

%if 0%{?fedora} || 0%{?rhel} >= 7

    %define with_firewalld 1

%endif

# RHEL-6 stopped including Xen on all archs.

%if 0%{?rhel}

    %define with_xen 0

%endif

# fuse is used to provide virtualized /proc for LXC

%if 0%{?fedora} || 0%{?rhel} >= 7

    %define with_fuse      0%{!?_without_fuse:1}

%endif

# Enable sanlock library for lock management with QEMU

# Sanlock is available only on arches where kvm is available for RHEL

%if 0%{?fedora}

    %define with_sanlock 0%{!?_without_sanlock:1}

%endif

%if 0%{?rhel}

    %ifarch %{qemu_kvm_arches}

        %define with_sanlock 0%{!?_without_sanlock:1}

    %endif

%endif

# Enable libssh2 transport for new enough distros

%if 0%{?fedora}

    %define with_libssh2 0%{!?_without_libssh2:1}

%endif

# Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer

%if 0%{?fedora}

    %define with_wireshark 0%{!?_without_wireshark:1}

%endif

# Enable libssh transport for new enough distros

%if 0%{?fedora}

    %define with_libssh 0%{!?_without_libssh:1}

%endif

%if %{with_qemu} || %{with_lxc} || %{with_uml}

# numad is used to manage the CPU and memory placement dynamically,

# it's not available on s390[x] and ARM.

    %ifnarch s390 s390x %{arm}

        %define with_numad    0%{!?_without_numad:1}

    %endif

%endif

# Pull in cgroups config system

%if %{with_qemu} || %{with_lxc}

    %define with_cgconfig 0%{!?_without_cgconfig:1}

%endif

# Force QEMU to run as non-root

%define qemu_user  qemu

%define qemu_group  qemu

%if 0%{?fedora} || 0%{?rhel} >= 7

    %define with_systemd_macros 1

%else

    %define with_systemd_macros 0

%endif

# RHEL releases provide stable tool chains and so it is safe to turn

# compiler warning into errors without being worried about frequent

# changes in reported warnings

%if 0%{?rhel}

    %define enable_werror --enable-werror

%else

    %define enable_werror --disable-werror

%endif

%if 0%{?fedora} >= 25

    %define tls_priority "@LIBVIRT,SYSTEM"

%else

    %if 0%{?fedora}

        %define tls_priority "@SYSTEM"

    %else

        %define tls_priority "NORMAL"

    %endif

%endif

Summary: Library providing a simple virtualization API

Name: libvirt

Version: 3.0.0

Release: 1%{?dist}%{?extra_release}

License: LGPLv2+

Group: Development/Libraries

BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root

URL: http://libvirt.org/

%if %(echo %{version} | grep -o \\. | wc -l) == 3

    %define mainturl stable_updates/

%endif

Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz

# Temporarily disable namespaces due to various regressions

# they cause

Patch1: 0001-Disable-use-of-namespaces-by-default.patch

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-config-network = %{version}-%{release}

Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}

%if %{with_libxl}

Requires: libvirt-daemon-driver-libxl = %{version}-%{release}

%endif

%if %{with_lxc}

Requires: libvirt-daemon-driver-lxc = %{version}-%{release}

%endif

%if %{with_qemu}

Requires: libvirt-daemon-driver-qemu = %{version}-%{release}

%endif

%if %{with_uml}

Requires: libvirt-daemon-driver-uml = %{version}-%{release}

%endif

%if %{with_xen}

Requires: libvirt-daemon-driver-xen = %{version}-%{release}

%endif

%if %{with_vbox}

Requires: libvirt-daemon-driver-vbox = %{version}-%{release}

%endif

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-client = %{version}-%{release}

Requires: libvirt-libs = %{version}-%{release}

# All build-time requirements. Run-time requirements are

# listed against each sub-RPM

%if 0%{?enable_autotools}

BuildRequires: autoconf

BuildRequires: automake

BuildRequires: gettext-devel

BuildRequires: libtool

BuildRequires: /usr/bin/pod2man

%endif

BuildRequires: git

BuildRequires: perl

BuildRequires: python

%if %{with_systemd}

BuildRequires: systemd-units

%endif

%if %{with_xen} || %{with_libxl}

BuildRequires: xen-devel

%endif

BuildRequires: libxml2-devel

BuildRequires: xhtml1-dtds

BuildRequires: libxslt

BuildRequires: readline-devel

BuildRequires: ncurses-devel

BuildRequires: gettext

BuildRequires: libtasn1-devel

%if (0%{?rhel} && 0%{?rhel} < 7)

BuildRequires: libgcrypt-devel

%endif

BuildRequires: gnutls-devel

BuildRequires: libattr-devel

# For pool-build probing for existing pools

BuildRequires: libblkid-devel >= 2.17

# for augparse, optionally used in testing

BuildRequires: augeas

%if 0%{?fedora} || 0%{?rhel} >= 7

BuildRequires: systemd-devel >= 185

%else

BuildRequires: libudev-devel >= 145

%endif

BuildRequires: libpciaccess-devel >= 0.10.9

BuildRequires: yajl-devel

%if %{with_sanlock}

BuildRequires: sanlock-devel >= 2.4

%endif

BuildRequires: libpcap-devel

%if 0%{?rhel} && 0%{?rhel} < 7

BuildRequires: libnl-devel

%else

BuildRequires: libnl3-devel

%endif

BuildRequires: avahi-devel

BuildRequires: libselinux-devel

BuildRequires: dnsmasq >= 2.41

BuildRequires: iptables

%if 0%{?rhel} && 0%{?rhel} < 7

BuildRequires: iptables-ipv6

%endif

BuildRequires: radvd

BuildRequires: ebtables

BuildRequires: module-init-tools

BuildRequires: cyrus-sasl-devel

%if 0%{?fedora} || 0%{?rhel} >= 7

# F22 polkit-devel doesn't pull in polkit anymore, which we need for pkcheck

BuildRequires: polkit >= 0.112

BuildRequires: polkit-devel >= 0.112

%else

BuildRequires: polkit-devel >= 0.93

%endif

# For mount/umount in FS driver

BuildRequires: util-linux

%if %{with_qemu}

# From QEMU RPMs

BuildRequires: /usr/bin/qemu-img

%else

    %if %{with_xen}

# From Xen RPMs

BuildRequires: /usr/sbin/qcow-create

    %endif

%endif

# For LVM drivers

BuildRequires: lvm2

# For ISCSI driver

BuildRequires: iscsi-initiator-utils

# For disk driver

BuildRequires: parted-devel

# For Multipath support

BuildRequires: device-mapper-devel

%if %{with_storage_rbd}

    %if 0%{?rhel} >= 7

BuildRequires: librados2-devel

BuildRequires: librbd1-devel

    %else

BuildRequires: ceph-devel

    %endif

%endif

%if %{with_storage_gluster}

BuildRequires: glusterfs-api-devel >= 3.4.1

BuildRequires: glusterfs-devel >= 3.4.1

%endif

%if %{with_storage_sheepdog}

BuildRequires: sheepdog

%endif

%if %{with_numactl}

# For QEMU/LXC numa info

BuildRequires: numactl-devel

%endif

BuildRequires: libcap-ng-devel >= 0.5.0

%if %{with_fuse}

BuildRequires: fuse-devel >= 2.8.6

%endif

%if %{with_phyp} || %{with_libssh2}

BuildRequires: libssh2-devel >= 1.3.0

%endif

%if 0%{?fedora} || 0%{?rhel} >= 7

BuildRequires: netcf-devel >= 0.2.2

%else

BuildRequires: netcf-devel >= 0.1.8

%endif

%if %{with_esx}

BuildRequires: libcurl-devel

%endif

%if %{with_hyperv}

BuildRequires: libwsman-devel >= 2.2.3

%endif

BuildRequires: audit-libs-devel

# we need /usr/sbin/dtrace

BuildRequires: systemtap-sdt-devel

# For mount/umount in FS driver

BuildRequires: util-linux

# For showmount in FS driver (netfs discovery)

BuildRequires: nfs-utils

# Communication with the firewall and polkit daemons use DBus

BuildRequires: dbus-devel

# Fedora build root suckage

BuildRequires: gawk

# For storage wiping with different algorithms

BuildRequires: scrub

%if %{with_numad}

BuildRequires: numad

%endif

%if %{with_wireshark}

    %if 0%{fedora} >= 24

BuildRequires: wireshark-devel >= 2.1.0

# Temp hack for F25/rawhide due to broken wireshark-devel deps

# https://bugzilla.redhat.com/show_bug.cgi?id=1401463

BuildRequires: qt-devel glib2-devel

    %else

BuildRequires: wireshark-devel >= 1.12.1

    %endif

%endif

%if %{with_libssh}

BuildRequires: libssh-devel >= 0.7.0

%endif

Provides: bundled(gnulib)

%description

Libvirt is a C toolkit to interact with the virtualization capabilities

of recent versions of Linux (and other OSes). The main package includes

the libvirtd server exporting the virtualization support.

%package docs

Summary: API reference and website documentation

Group: Development/Libraries

%description docs

Includes the API reference for the libvirt C library, and a complete

copy of the libvirt.org website documentation.

%package daemon

Summary: Server side daemon and supporting files for libvirt library

Group: Development/Libraries

# All runtime requirements for the libvirt package (runtime requrements

# for subpackages are listed later in those subpackages)

# The client side, i.e. shared libs are in a subpackage

Requires: %{name}-libs = %{version}-%{release}

# for modprobe of pci devices

Requires: module-init-tools

# for /sbin/ip & /sbin/tc

Requires: iproute

Requires: avahi-libs

%if 0%{?fedora} || 0%{?rhel} >= 7

Requires: polkit >= 0.112

%else

Requires: polkit >= 0.93

%endif

%if %{with_cgconfig}

Requires: libcgroup

%endif

%ifarch %{ix86} x86_64 ia64

# For virConnectGetSysinfo

Requires: dmidecode

%endif

# For service management

%if %{with_systemd}

Requires(post): systemd-units

Requires(post): systemd-sysv

Requires(preun): systemd-units

Requires(postun): systemd-units

%endif

%if %{with_numad}

Requires: numad

%endif

# libvirtd depends on 'messagebus' service

Requires: dbus

# For uid creation during pre

Requires(pre): shadow-utils

%description daemon

Server side daemon required to manage the virtualization capabilities

of recent versions of Linux. Requires a hypervisor specific sub-RPM

for specific drivers.

%package daemon-config-network

Summary: Default configuration files for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

%description daemon-config-network

Default configuration files for setting up NAT based networking

%package daemon-config-nwfilter

Summary: Network filter configuration files for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

%description daemon-config-nwfilter

Network filter configuration files for cleaning guest traffic

%package daemon-driver-network

Summary: Network driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: dnsmasq >= 2.41

Requires: radvd

Requires: iptables

%if 0%{?rhel} && 0%{?rhel} < 7

Requires: iptables-ipv6

%endif

%description daemon-driver-network

The network driver plugin for the libvirtd daemon, providing

an implementation of the virtual network APIs using the Linux

bridge capabilities.

%package daemon-driver-nwfilter

Summary: Nwfilter driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: iptables

%if 0%{?rhel} && 0%{?rhel} < 7

Requires: iptables-ipv6

%endif

Requires: ebtables

%description daemon-driver-nwfilter

The nwfilter driver plugin for the libvirtd daemon, providing

an implementation of the firewall APIs using the ebtables,

iptables and ip6tables capabilities

%package daemon-driver-nodedev

Summary: Nodedev driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

# needed for device enumeration

%if 0%{?fedora} || 0%{?rhel} >= 7

Requires: systemd >= 185

%else

Requires: udev >= 145

%endif

%description daemon-driver-nodedev

The nodedev driver plugin for the libvirtd daemon, providing

an implementation of the node device APIs using the udev

capabilities.

%package daemon-driver-interface

Summary: Interface driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%if (0%{?fedora} || 0%{?rhel} >= 7)

Requires: netcf-libs >= 0.2.2

%endif

%description daemon-driver-interface

The interface driver plugin for the libvirtd daemon, providing

an implementation of the network interface APIs using the

netcf library

%package daemon-driver-secret

Summary: Secret driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-secret

The secret driver plugin for the libvirtd daemon, providing

an implementation of the secret key APIs.

%package daemon-driver-storage

Summary: Storage driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: nfs-utils

# For mkfs

Requires: util-linux

# For glusterfs

%if 0%{?fedora}

Requires: glusterfs-client >= 2.0.1

%endif

# For LVM drivers

Requires: lvm2

# For ISCSI driver

Requires: iscsi-initiator-utils

# For disk driver

Requires: parted

Requires: device-mapper

# For multipath support

Requires: device-mapper

%if %{with_storage_sheepdog}

# For Sheepdog support

Requires: sheepdog

%endif

%if %{with_qemu}

# From QEMU RPMs

Requires: /usr/bin/qemu-img

%else

    %if %{with_xen}

# From Xen RPMs

Requires: /usr/sbin/qcow-create

    %endif

%endif

%description daemon-driver-storage

The storage driver plugin for the libvirtd daemon, providing

an implementation of the storage APIs using LVM, iSCSI,

parted and more.

%if %{with_qemu}

%package daemon-driver-qemu

Summary: Qemu driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

# There really is a hard cross-driver dependency here

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: /usr/bin/qemu-img

# For image compression

Requires: gzip

Requires: bzip2

Requires: lzop

Requires: xz

    %if 0%{?fedora} >= 24

Requires: systemd-container

    %endif

%description daemon-driver-qemu

The qemu driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

QEMU

%endif

%if %{with_lxc}

%package daemon-driver-lxc

Summary: LXC driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

# There really is a hard cross-driver dependency here

Requires: libvirt-daemon-driver-network = %{version}-%{release}

    %if 0%{?fedora} >= 24

Requires: systemd-container

    %endif

%description daemon-driver-lxc

The LXC driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

the Linux kernel

%endif

%if %{with_uml}

%package daemon-driver-uml

Summary: Uml driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-uml

The UML driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

User Mode Linux

%endif

%if %{with_xen}

%package daemon-driver-xen

Summary: Xen driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-xen

The Xen driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

Xen

%endif

%if %{with_vbox}

%package daemon-driver-vbox

Summary: VirtualBox driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-vbox

The vbox driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

VirtualBox

%endif

%if %{with_libxl}

%package daemon-driver-libxl

Summary: Libxl driver plugin for the libvirtd daemon

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

%description daemon-driver-libxl

The Libxl driver plugin for the libvirtd daemon, providing

an implementation of the hypervisor driver APIs using

Libxl

%endif

%if %{with_qemu_tcg}

%package daemon-qemu

Summary: Server side daemon & driver required to run QEMU guests

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-qemu = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: qemu

%description daemon-qemu

Server side daemon and driver required to manage the virtualization

capabilities of the QEMU TCG emulators

%endif

%if %{with_qemu_kvm}

%package daemon-kvm

Summary: Server side daemon & driver required to run KVM guests

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-qemu = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: qemu-kvm

%description daemon-kvm

Server side daemon and driver required to manage the virtualization

capabilities of the KVM hypervisor

%endif

%if %{with_lxc}

%package daemon-lxc

Summary: Server side daemon & driver required to run LXC guests

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-lxc = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

%description daemon-lxc

Server side daemon and driver required to manage the virtualization

capabilities of LXC

%endif

%if %{with_uml}

%package daemon-uml

Summary: Server side daemon & driver required to run UML guests

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-uml = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

# There are no UML kernel RPMs in Fedora/RHEL to depend on.

%description daemon-uml

Server side daemon and driver required to manage the virtualization

capabilities of UML

%endif

%if %{with_xen} || %{with_libxl}

%package daemon-xen

Summary: Server side daemon & driver required to run XEN guests

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

    %if %{with_xen}

Requires: libvirt-daemon-driver-xen = %{version}-%{release}

    %endif

    %if %{with_libxl}

Requires: libvirt-daemon-driver-libxl = %{version}-%{release}

    %endif

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

Requires: xen

%description daemon-xen

Server side daemon and driver required to manage the virtualization

capabilities of XEN

%endif

%if %{with_vbox}

%package daemon-vbox

Summary: Server side daemon & driver required to run VirtualBox guests

Group: Development/Libraries

Requires: libvirt-daemon = %{version}-%{release}

Requires: libvirt-daemon-driver-vbox = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}

Requires: libvirt-daemon-driver-network = %{version}-%{release}

Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}

Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-secret = %{version}-%{release}

Requires: libvirt-daemon-driver-storage = %{version}-%{release}

%description daemon-vbox

Server side daemon and driver required to manage the virtualization

capabilities of VirtualBox

%endif

%package client

Summary: Client side utilities of the libvirt library

Group: Development/Libraries

Requires: %{name}-libs = %{version}-%{release}

Requires: readline

Requires: ncurses

# Needed by /usr/libexec/libvirt-guests.sh script.

Requires: gettext

# Needed by virt-pki-validate script.

Requires: gnutls-utils

%if %{with_pm_utils}

# Needed for probing the power management features of the host.

Requires: pm-utils

%endif