%global eppic_ver d84c3541035d95077aa8571f5d5c3e07c6ef510b

%global eppic_shortver %(c=%{eppic_ver}; echo ${c:0:7})

%global mkdf_ver 1.6.9

%global mkdf_shortver %(c=%{mkdf_ver}; echo ${c:0:7})

Name: kexec-tools

Version: 2.0.22

Release: 7%{?dist}

License: GPLv2

Summary: The kexec/kdump userspace component

Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.xz

Source1: kdumpctl

Source2: kdump.sysconfig

Source3: kdump.sysconfig.x86_64

Source4: kdump.sysconfig.i386

Source5: kdump.sysconfig.ppc64

Source7: mkdumprd

Source8: kdump.conf

Source9: https://github.com/makedumpfile/makedumpfile/archive/%{mkdf_ver}/makedumpfile-%{mkdf_shortver}.tar.gz

Source10: kexec-kdump-howto.txt

Source11: fadump-howto.txt

Source12: mkdumprd.8

Source13: 98-kexec.rules

Source14: 98-kexec.rules.ppc64

Source15: kdump.conf.5

Source16: kdump.service

Source18: kdump.sysconfig.s390x

Source19: https://github.com/lucchouina/eppic/archive/%{eppic_ver}/eppic-%{eppic_shortver}.tar.gz

Source20: kdump-lib.sh

Source21: kdump-in-cluster-environment.txt

Source22: kdump-dep-generator.sh

Source23: kdump-lib-initramfs.sh

Source24: kdump.sysconfig.ppc64le

Source25: kdumpctl.8

Source26: live-image-kdump-howto.txt

Source27: early-kdump-howto.txt

Source28: kdump-udev-throttler

Source29: kdump.sysconfig.aarch64

Source30: 60-kdump.install

Source31: kdump-logger.sh

#######################################

# These are sources for mkdumpramfs

# Which is currently in development

#######################################

Source100: dracut-kdump.sh

Source101: dracut-module-setup.sh

Source102: dracut-monitor_dd_progress

Source103: dracut-kdump-error-handler.sh

Source104: dracut-kdump-emergency.service

Source106: dracut-kdump-capture.service

Source107: dracut-kdump-emergency.target

Source108: dracut-early-kdump.sh

Source109: dracut-early-kdump-module-setup.sh

Requires(post): systemd-units

Requires(preun): systemd-units

Requires(postun): systemd-units

Requires(pre): coreutils sed zlib

Requires: dracut >= 050

Requires: dracut-network >= 050

Requires: dracut-squash >= 050

Requires: ethtool

BuildRequires: make

BuildRequires: zlib-devel elfutils-devel glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel

BuildRequires: pkgconfig intltool gettext

BuildRequires: systemd-units

BuildRequires: automake autoconf libtool

%ifarch %{ix86} x86_64 ppc64 ppc s390x ppc64le

Obsoletes: diskdumputils netdump kexec-tools-eppic

%endif

%ifnarch s390x

Requires:       systemd-udev%{?_isa}

%endif

#START INSERT

#

# Patches 0 through 100 are meant for x86 kexec-tools enablement

#

#

# Patches 101 through 200 are meant for x86_64 kexec-tools enablement

#

#

# Patches 301 through 400 are meant for ppc64 kexec-tools enablement

#

#

# Patches 401 through 500 are meant for s390 kexec-tools enablement

#

#

# Patches 501 through 600 are meant for ARM kexec-tools enablement

#

#

# Patches 601 onward are generic patches

#

Patch601: ./kexec-tools-2.0.20-eppic-Remove-duplicated-variable-declaration.patch

Patch602: ./kexec-tools-2.0.22-makedumpfile-Increase-SECTION_MAP_LAST_BIT-to-5.patch

Patch603: ./kexec-tools-2.0.22-makedumpfile-check-for-invalid-physical-address-proc-kcore-when-making-ELF-dumpfile.patch

%description

kexec-tools provides /sbin/kexec binary that facilitates a new

kernel to boot using the kernel's kexec feature either on a

normal or a panic reboot. This package contains the /sbin/kexec

binary and ancillary utilities that together form the userspace

component of the kernel's kexec feature.

%prep

%setup -q

mkdir -p -m755 kcp

tar -z -x -v -f %{SOURCE9}

tar -z -x -v -f %{SOURCE19}

%patch601 -p1

%patch602 -p1

%patch603 -p1

%ifarch ppc

%define archdef ARCH=ppc

%endif

%build

autoreconf

%configure \

%ifarch ppc64

    --host=powerpc64-redhat-linux-gnu \

    --build=powerpc64-redhat-linux-gnu \

%endif

%ifarch ppc64le

    --host=powerpc64le-redhat-linux-gnu \

    --build=powerpc64le-redhat-linux-gnu \

%endif

    --sbindir=/usr/sbin

rm -f kexec-tools.spec.in

# setup the docs

cp %{SOURCE10} .

cp %{SOURCE11} .

cp %{SOURCE21} .

cp %{SOURCE26} .

cp %{SOURCE27} .

make

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

make -C eppic-%{eppic_ver}/libeppic

make -C makedumpfile-%{mkdf_ver} LINKTYPE=dynamic USELZO=on USESNAPPY=on

make -C makedumpfile-%{mkdf_ver} LDFLAGS="$LDFLAGS -I../eppic-%{eppic_ver}/libeppic -L../eppic-%{eppic_ver}/libeppic" eppic_makedumpfile.so

%endif

%install

mkdir -p -m755 $RPM_BUILD_ROOT/usr/sbin

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/pre.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/post.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/

mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_udevrulesdir}

mkdir -p $RPM_BUILD_ROOT%{_unitdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sharedstatedir}/kdump

install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl

install -m 755 build/sbin/kexec $RPM_BUILD_ROOT/usr/sbin/kexec

install -m 755 build/sbin/vmcore-dmesg $RPM_BUILD_ROOT/usr/sbin/vmcore-dmesg

install -m 644 build/man/man8/kexec.8  $RPM_BUILD_ROOT%{_mandir}/man8/

install -m 644 build/man/man8/vmcore-dmesg.8  $RPM_BUILD_ROOT%{_mandir}/man8/

SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig

install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump

install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/usr/sbin/mkdumprd

install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf

install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8

install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8

install -m 644 %{SOURCE25} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8

install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh

install -m 755 %{SOURCE23} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh

install -m 755 %{SOURCE31} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-logger.sh

%ifnarch s390x

install -m 755 %{SOURCE28} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler

%endif

%ifnarch s390x ppc64 ppc64le

# For s390x the ELF header is created in the kdump kernel and therefore kexec

# udev rules are not required

install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

%endif

%ifarch ppc64 ppc64le

install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

%endif

install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5

install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service

install -m 755 -D %{SOURCE22} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

install -m 755 -D %{SOURCE30} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-kdump.install

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

install -m 755 makedumpfile-%{mkdf_ver}/makedumpfile $RPM_BUILD_ROOT/usr/sbin/makedumpfile

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample

install -m 755 makedumpfile-%{mkdf_ver}/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so

mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

install -m 644 makedumpfile-%{mkdf_ver}/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

%endif

%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')

%define remove_dracut_early_kdump_prefix() %(echo -n %1|sed 's/.*dracut-early-kdump-//g')

# deal with dracut modules

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase

cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}

cp %{SOURCE103} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE103}}

cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE104}}

cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}}

cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump

cp %{SOURCE108} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

cp %{SOURCE109} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

%define dracutlibdir %{_prefix}/lib/dracut

#and move the custom dracut modules to the dracut directory

mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

%post

# Initial installation

%systemd_post kdump.service

touch /etc/kdump.conf

# This portion of the script is temporary.  Its only here

# to fix up broken boxes that require special settings 

# in /etc/sysconfig/kdump.  It will be removed when 

# These systems are fixed.

if [ -d /proc/bus/mckinley ]

then

	# This is for HP zx1 machines

	# They require machvec=dig on the kernel command line

	sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

elif [ -d /proc/sgi_sn ]

then

	# This is for SGI SN boxes

	# They require the --noio option to kexec 

	# since they don't support legacy io

	sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

fi

%postun

%systemd_postun_with_restart kdump.service

%preun

# Package removal, not upgrade

%systemd_preun kdump.service

%triggerun -- kexec-tools < 2.0.2-3

# Save the current service runlevel info

# User must manually run systemd-sysv-convert --apply kdump

# to migrate them to systemd targets

/usr/bin/systemd-sysv-convert --save kdump >/dev/null 2>&1 ||:

# Run these because the SysV package being removed won't do them

/sbin/chkconfig --del kdump >/dev/null 2>&1 || :

/bin/systemctl try-restart kdump.service >/dev/null 2>&1 || :

%triggerin -- kernel-kdump

touch %{_sysconfdir}/kdump.conf

%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump

# List out the initrds here, strip out version nubmers

# and search for corresponding kernel installs, if a kernel

# is not found, remove the corresponding kdump initrd

IMGDIR=/boot

for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null`

do

	KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'`

	if [ ! -e $IMGDIR/vmlinuz-$KDVER ]

	then

		# We have found an initrd with no corresponding kernel

		# so we should be able to remove it

		rm -f $i

	fi

done

%files

/usr/sbin/kexec

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

/usr/sbin/makedumpfile

%endif

/usr/sbin/mkdumprd

/usr/sbin/vmcore-dmesg

%{_bindir}/*

%{_datadir}/kdump

%{_prefix}/lib/kdump

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_sysconfdir}/makedumpfile.conf.sample

%endif

%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump

%config(noreplace,missingok) %verify(not mtime) %{_sysconfdir}/kdump.conf

%ifnarch s390x

%config %{_udevrulesdir}

%{_udevrulesdir}/../kdump-udev-throttler

%endif

%{dracutlibdir}/modules.d/*

%dir %{_localstatedir}/crash

%dir %{_sysconfdir}/kdump

%dir %{_sysconfdir}/kdump/pre.d

%dir %{_sysconfdir}/kdump/post.d

%dir %{_sharedstatedir}/kdump

%{_mandir}/man8/kdumpctl.8.gz

%{_mandir}/man8/kexec.8.gz

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_mandir}/man8/makedumpfile.8.gz

%endif

%{_mandir}/man8/mkdumprd.8.gz

%{_mandir}/man8/vmcore-dmesg.8.gz

%{_mandir}/man5/*

%{_unitdir}/kdump.service

%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

%{_prefix}/lib/kernel/install.d/60-kdump.install

%doc News

%license COPYING

%doc TODO

%doc kexec-kdump-howto.txt

%doc early-kdump-howto.txt

%doc fadump-howto.txt

%doc kdump-in-cluster-environment.txt

%doc live-image-kdump-howto.txt

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_libdir}/eppic_makedumpfile.so

/usr/share/makedumpfile/

%endif

%changelog

* Wed Jun 23 2021 Tao Liu <ltao@redhat.com> - 2.0.22-7

- Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable

* Wed Jun 16 2021 Tao Liu <ltao@redhat.com> - 2.0.22-6

- Add gating.yaml to RHEL-9 kexec-tools

- Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet

* Mon Jun 7 2021 Tao Liu <ltao@redhat.com> - 2.0.22-5

- Use a customized emergency shell

- Remove the kdump error handler isolation wrapper

- Don's try to restart dracut-initqueue if it's already there

* Thu May 27 2021 Tao Liu <ltao@redhat.com> - 2.0.22-4

- kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()

* Mon May 24 2021 Tao Liu <ltao@redhat.com> - 2.0.22-3

- kdumpctl: Add kdumpctl estimate

- mkdumprd: make use of the new get_luks_crypt_dev helper

- kdump-lib.sh: introduce a helper to get all crypt dev used by kdump

- kdump-lib.sh: introduce a helper to get underlying crypt device

- Revert "Always set vm.zone_reclaim_mode = 3 in kdump kernel"

* Fri May 14 2021 Tao Liu <ltao@redhat.com> - 2.0.22-2

- Stop reloading kdump service on CPU hotplug event for FADump

- Make dracut-squash required for kexec-tools

- Fix incorrect file permissions of vmcore-dmesg-incomplete.txt

- Disable CMA in kdump 2nd kernel

- update makedumpfile to v1.6.9

- (upstream/c9s) Warn the user if network scripts are used

- Set up bond cmdline by "nmcli --get-values"

- Set up dns cmdline by parsing "nmcli --get-values"

- Set up s390 znet cmdline by "nmcli --get-values"

- Add helper to get nmcli connection show cmd by ifname

- Add helper to get nmcli connection apath by ifname

- Add helper to get value by field using "nmcli --get-values"

* Thu May 13 2021 Tao Liu <ltao@redhat.com> - 2.0.22-1

- Update to kexec-tools 2.0.22

- rd.route should use the name from kdump_setup_ifname

- get kdump ifname once in kdump_install_net

- Implement IP netmask calculation to replace "ipcalc -m"

- kdump-lib.sh: introduce functions to return recommened mem size

* Sun Apr 25 2021 Tao Liu <ltao@redhat.com> - 2.0.21-7

- Fix incorrect vmcore permissions when dumped through ssh

- Fix incorrect permissions on kdump dmesg file

* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 2.0.21-6

- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937

* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.21-5

- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild

* Fri Jan 22 2021 Kairui Song <kasong@redhat.com> - 2.0.21-4

- dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode

- kdump.conf: add ipv6 example for nfs and ssh dump

- fix kdump failure of saving vmcore with the scp + ipv6 method

* Wed Jan 20 2021 Kairui Song <kasong@redhat.com> - 2.0.21-3

- module-setup.sh: don't polute the namespace unnecessarily

- module-setup.sh: don't source $dracutfunctions

- logger: source the logger file individually

- Fix dump_fs mount point detection and fallback mount

- Revert "Don's try to restart dracut-initqueue if it's already failed"

- Revert "Append both nofail and x-systemd.before to kdump mount target"

- Doc: Improve the kdump sysconfig document

- kdump.conf: Update doc about core_collector for ssh target

- Merge #4 `Make dracut-squash a weak dep`

- Fix a date error in the change log

* Fri Jan 08 2021 Kairui Song <kasong@redhat.com> - 2.0.21-2

- makedumpfile: make use of 'uts_namespace.name' offset in VMCOREINFO

- kdumpctl: fix a variable expansion in check_fence_kdump_config()

- Add BuildRequires: make

- Save the final failure information to log file if saving vmcore failed

* Wed Dec 23 2020 Kairui Song <kasong@redhat.com> - 2.0.21-1

- makedumpfile: printk: use committed/finalized state values

- makedumpfile: printk: add support for lockless ringbuffer

- dracut-module-setup.sh: Use systemctl call to replace ln_r

- Doc: improve mkdumprd man page

- Don's try to restart dracut-initqueue if it's already failed

- dracut-module-setup.sh: use auto6 for ipv6

* Mon Nov 30 2020 Kairui Song <kasong@redhat.com> - 2.0.20-21

- Rebase makedumpfile to 1.6.8

- fadump-howto: update about 'nocma' and 'off' options for 'fadump=' parameter

- module-setup.sh: enable vlan on team interface

- kdump-lib: Fix get_bind_mount_source to support btrfs and fstab

- Make get_mount_info work with bind mount

- Set watchdog's pretimeout to zero in kdump kernel

- kdump-lib.sh: Use a more generic helper to detect omitted dracut module

- Fix the watchdog drivers detection code

- Add a helper for detecting watchdog drivers

- Remove a redundant nfs check

- kdumpctl: split the driver detection from fs dection function

* Thu Nov 19 2020 Kairui Song <kasong@redhat.com> - 2.0.20-20

- selftest: Fix several test issue with Fedora 33

- selftest: add more detailed log and fix a test failure issue

- selftest: Update test base image to Fedora 33

- selftest: Fix qcow2 image format detect

- selftest: Always use the get_image_fmt helper

- Doc: improve the usage documentation of the logger

- Update the kdump sysconfig

- Capitalize the configuration name of log level

- Add the rd.kdumploglvl option to control log level in the second kernel

- Appropriately converts logger numeric level to syslog log level

- Remove unused log levels for kdump logger

- Add sanity checks for the log levels

- Move watchdog detect and install code to module-setup.sh

- Add a helper to omit non-mandatory dracut module

- Move some dracut module dependencies checks to module-setup.sh

- Add code comments to help better understanding

* Thu Nov 05 2020 Kairui Song <kasong@redhat.com> - 2.0.20-19

- Fix comment about ssh dump target

- mkdumprd: Ensure kdumpbase is added

- kdump.service: use ConditionKernelCommandLine=crashkernel

- Revert "Revert "s390x: enable the kexec file load by def

- increase makdumpfile default message level to 7

- Fix error when using raw target with opalcore

- module-setup.sh: Instead of drop journalctl log, just don't read kmsg

- Doc: add a documentation for the usage of logger

- Improve debugging in the kdump kernel

- kdumpctl: add the '-d' option to enable the kexec loading debugging messages

- kdump.sysconfig: add the kdump logger configurations

- enable the logger for kdump

- introduce the kdump logger from the dracut

- Rework check_config and warn on any duplicated option

- (watchdog) kdump-lib.sh: detect secure boot on s390

- Don't drop journalctl content if failure action is "shell"

- dracut-module-install: Move systemd conf install code to a function

- selftest: Show the path of dumped vmcore on test end

- selftest: Add document for selftests

- selftest: Add basic test framework

- selftest: Add basic infrastructure to build test image

* Thu Aug 27 2020 Kairui Song <kasong@redhat.com> - 2.0.20-18

- mkdumprd: Improve the warning message when using encrypted target

- kdump-lib.sh: Remove is_atomic

- Refactor kernel image and initrd detection code

- early-kdump: Use consistent symbol link for kernel and initramfs

- Add a kernel install hook to clean up kdump initramfs

* Tue Aug 04 2020 Kairui Song <kasong@redhat.com> - 2.0.20-17

- Drop static lib dependencies

- Revert "x86_64: enable the kexec file load by default"

- Revert "s390x: enable the kexec file load by default"

- kdumpctl: exit if either pre.d or post.d is missing

- kdump_pre: make notes more precise

- dracut-kdump.sh: exit shell when machine reboot

- kdumpctl: detect modification of scripts by its directory's timestamp

- module-setup.sh: suppress false alarm

- kexec-tools.spec: make the existence of pre.d and post.d mandatory

- ppc64/kdump: use kexec_file_load when secureboot is enabled

* Sat Aug 01 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.20-16

- Second attempt - Rebuilt for

  https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild

* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.20-15

- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild

* Wed Jul 1 2020 Kairui Song <kasong@redhat.com> - 2.0.20-14

- s390x: enable the kexec file load by default

- x86_64: enable the kexec file load by default

- Revert "s390x: add kdump sysconfig option to use the kexec_file_load() syscall"

- Revert "kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default"

- kdump.conf: fix a grammar issue

- man: improve description about /etc/kdump/{pre.d,post.d}interface

- mkdumprd: Improve the error message for umounted dump target

- mkdumprd: Fix nfs detection in to_mount

- Always wrap up call to dracut get_persistent_dev function

- s390x: add kdump sysconfig option to use the kexec_file_load() syscall

- mkdumprd: Fix dracut error on multiple extra_modules

- Fix kdump failure when mount target specified by dracut_args

- kdump.conf: Specify /etc/kdump/{pre.d,post.d}interface

- dracut-kdump.sh: Execute the binary and script filesin /etc/kdump/{pre.d,post.d}

- kdumpctl: Check the update of the binary and script files in /etc/kdump/{pre.d,post.d}

- dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs

- Drop switch root capability for non fadump initramfs

- fadump: update fadump-howto.txt with some more troubleshooting help

- fadump-howto.txt: source it in spec file

- Don't inherit swiotlb parameter form 1st kernel by default

- module-setup.sh: Add "rd.neednet" parameter if network is needed

- Revert "Add a hook to wait for kdump target in initqueue"

- kdump.sysconfig: Remove the option 'log_buf_len' from kdump command line

* Fri May 22 2020 Kairui Song <kasong@redhat.com> - 2.0.20-13

- Update docs for the new noauto dump target support

- kexec-kdump-howto.txt: Add some format to the document

- mkdumprd: generate usable kdump initramfs even target is not mounted

- User get_mount_info to replace findmnt calls

- kdump-lib.sh: add fstab failback helper for getting mount info

- Allow calling mkdumprd from kdumpctl even if targat not mounted

- Add a is_mounted helper

- Introduce get_kdump_mntpoint_from_target and fix duplicated /

- Append both nofail and x-systemd.before to kdump mount target

- Fix the problem that kdump prints redundant /

- Partially Revert "Don't mount the dump target unless needed"

- fadump: update fadump-howto.txt with some troubleshooting help

- Add a new option 'rd.znet_ifname' in order to use it in udev rules

- Don't unmount the dump target just after saving vmcore

- dracut-module-setup.sh: fix breakage in get_pcs_fence_kdump_nodes()

- dracut-module-setup.sh: ensure cluster info is ready before query

* Thu Apr 2 2020 Kairui Song <kasong@redhat.com> - 2.0.20-12

- Remove adjust_bind_mount_path call

- No longer treat atomic/silverblue specially

- mkdumprd: Simplify handling of user specified target

- mkdumprd: Use get_save_path instead of parsing config

- Remove is_dump_target_configured

- dracut-module-setup.sh: improve get_alias()

* Tue Mar 24 2020 Kairui Song <kasong@redhat.com> - 2.0.20-11

- Fix a potential syntax error

- Use read_strip_comments to filter the installed kdump.conf

- kdumpctl: fix driver change detection on latest Fedora

- kdumpctl: check hostonly-kernel-modules.txt for kernel module

- dracut-module-setup.sh: Ensure initrd.target.wants dir exists

- mkdumprd: Use DUMP_TARGET which printing error message during ssh

- kdump-lib.sh: Fix is_user_configured_dump_target()

- mkdumprd: Use makedumpfile --check-params option

- makedumpfile: Introduce --check-params option

- Improves the early-kdump-howto.txt document in several points:

* Thu Feb 13 2020 Kairui Song <kasong@redhat.com> - 2.0.20-10

- Add --force option to step 2 in early-kdump-howto.txt

- Fix typo in early-kdump-howto.txt

- kexec-tools/module-setup: Ensure eth devices get IP address for VLAN

- powerpc: enable the scripts to capture dump on POWERNV platform

- kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default

* Wed Jan 29 2020 Kairui Song <kasong@redhat.com> - 2.0.20-9

- Fix building failure

* Wed Jan 29 2020 Kairui Song <kasong@redhat.com> - 2.0.20-8

- Update makedumpfile to 1.6.7

- Add a hook to wait for kdump target in initqueue

- Always install sed and awk

- Fix potential ssh/nfs kdump failure of missing "ip" command

- kdump-lib.sh: Fix is_nfs_dump_target

- Always use get_save_path to get the 'path' option

- kdump-lib: Don't abuse echo, and clean up

* Sun Dec 29 2019 Kairui Song <kasong@redhat.com> - 2.0.20-7

- Fix building failure due to makedumpfile's compile flag

- mkdumprd: Fix dracut args parsing

* Thu Nov 28 2019 Kairui Song <kasong@redhat.com> - 2.0.20-6

- kdump-error-handler.service: Remove ExecStopPost

- mkdumprd: simplify dracut args parsing

- Always set vm.zone_reclaim_mode = 3 in kdump kernel

- kdumpctl: make reload fail proof

- spec: move binaries from /sbin to /usr/sbin

- Don't execute final_action if failure_action terminates the system

- module-setup.sh: Simplify the network setup code

- mkdumprd: ensure ssh path exists before check size

- module-setup: re-fix 99kdumpbase network dependency

- kdumpctl: bail out immediately if host key verification failed

* Tue Oct 15 2019 Kairui Song <kasong@redhat.com> - 2.0.20-5

- Don't mount the dump target unless needed

- kdump-lib: strip grub device from kdump_bootdir

- Add systemd-udev require.

* Tue Sep 24 2019 Kairui Song <kasong@redhat.com> - 2.0.20-4

- kdumpctl: echo msg when waiting for connection

- makedumpfile: Fix inconsistent return value from find_vmemmap()

- makedumpfile: Fix exclusion range in find_vmemmap_pages()

- makedumpfile: x86_64: Fix incorrect exclusion by -e option with KASLR

- kdumpctl: distinguish the failed reason of ssh

- kexec-kdump-howto.txt: Add notes about device dump

- Disable device dump by default

- dracut-module-setup: fix bond ifcfg processing

- dracut-module-setup: filter out localhost for generic_fence_kdump

- dracut-module-setup: get localhost alias by manual

* Mon Aug 12 2019 Kairui Song <kasong@redhat.com> - 2.0.20-3

- kdumpctl: wait a while for network ready if dump target is ssh

- makedumpfile: Increase SECTION_MAP_LAST_BIT to 4

- makedumpfile: Do not proceed when get_num_dumpable_cyclic() fails

- Don't forward and drop journalctl logs for fadump

* Fri Aug 02 2019 Kairui Song <kasong@redhat.com> - 2.0.20-2

- x86: Fix broken multiboot2 buliding for i386

- dracut-module-setup.sh: skip alias of localhost in get_pcs_fence_kdump_nodes()

* Wed Jul 31 2019 Kairui Song <kasong@redhat.com> - 2.0.20-1

- Update makedumpfile to 1.6.6

- dracut-module-setup.sh: Don't use squash module for fadump

- Forward logs in kdump kernel to console directly

- kdump.sysconfig/x86_64: Disable HEST by default

- dracut-kdump-capture.service: Use OnFailureJobMode instead of deprecated OnFailureIsolate

- makedumpfile: x86_64: Add support for AMD Secure Memory Encryption

- aarch64/kdump.sysconfig: Make config options similar to x86_64

- Add aarch64 specific kdump.sysconfig and use 'nr_cpus' instead of 'maxcpus'

- kdumpctl: check for ssh path availability when rebuild

- kdumpctl: Check kdump.conf for error when rebuild is called

* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.19-3

- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild

* Mon May 20 2019 Kairui Song <kasong@redhat.com> - 2.0.19-2

- kdumpctl: don't always rebuild when extra_modules is set

- kdumpctl: follow symlink when checking for modified files

- Get rid of duplicated strip_comments when reading config

- earlykdump: provide a prompt message after the rebuilding of kdump initramfs.

- kexec-kdump-howto.txt: Add document about encrypted targets

- kexec-kdump-howto.txt: Add document about initramfs rebiuld

- kdumpctl: Detect block device driver change for initramfs rebuild

- Revert "kdumpctl: Rebuild initramfs if loaded kernel modules changed"

- kexec.rules: create dedicated udev rules for ppc64

- kexec-kdump-howto: Add note on setting correct value of kptr_restrict

- Update man page for new kdumpctl command: reload / rebuild

- kdumpctl: add rebuild support

- mkdumprd: Improve the config reading logic

* Fri Mar 22 2019 Kairui Song <kasong@redhat.com> - 2.0.19-1

- Update eppic to latest snapshot

- fadump: leverage kernel support to re-regisgter FADump

- fadump: use the original initrd to rebuild fadump initrdfrom

* Fri Feb 22 2019 Kairui Song <kasong@redhat.com> - 2.0.18-5

- Update eppic to latest upstream snapshot

- Enable building with hardening flags

- Remove unused patches

- Remove obsolete Group tag

- mkdumprd: refine regex on dropping mount options

* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.18-4

- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild

* Tue Jan 22 2019 Kairui Song <kasong@redhat.com> - 2.0.18-3

- earlykdump: Add a note of final_action option to avoid crash loop

- Add final_action option to kdump.conf

- Add failure_action as alias of default and make default obsolete

- mkdumprd: force drop earlykdump module

- earlykdump: warn when installed kernel version differs from dracut target

- earlykdump: add more sanity check when generating initramfs

- earlykdump: generate symlink with stable name to kernel image and iniramfs

- earlykdump: fix kexec fails to load the early kdump kernel

- mkdumprd: allow spaces after 'path' config phrase with network dump setting

- dracut-module-setup: Don't build squashed image if required modules are missing

- kdump-lib-initramfs.sh: using -force option when poweroff

* Fri Dec 7 2018 Kairui Song <kasong@redhat.com> - 2.0.18-2

- Update makedumpfile 1.6.5

- Make udev reload rules quiet during bootup

- dracut-module-setup: Fix routing failure on multipath route

- mkdumprd: drop some nfs mount options when reading from kernel

- doc/kdump.conf: Local dump path should be <mnt>/<path>/%HOST_IP-%DATE

- As /etc/kdump.conf timestamp is updated do not compare it when doing rpm --verify

- Add missing usage info

* Mon Nov 5 2018 Kairui Song <kasong@redhat.com> - 2.0.18-1

- Update to kexec-tools 2.0.18

* Thu Nov 1 2018 Kairui Song <kasong@redhat.com> - 2.0.17-12

- Throttle kdump reload request triggered by udev event

- Rewrite kdump's udev rules

- kdumpctl: Add reload support

* Mon Oct 15 2018 Kairui Song <kasong@redhat.com> - 2.0.17-11

- Enable dracut squash module

- kdumpctl: Print warning in case the raw device is formatted and contains filesystem

- kdump-lib-initramfs.sh: Add check to remount to rw mode only if dump target is ro

* Wed Aug 22 2018 Kairui Song <kasong@redhat.com> - 2.0.17-10

- kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

- kdumpctl: Error out if path is set more than once

- Always drop nofail or nobootwait options

* Tue Aug 07 2018 Kairui Song <kasong@redhat.com> - 2.0.17-9

- Remove redundant kdump-anaconda-addon source codes

- dracut-module-setup: Fix DRM module inclusion test for hyper-v

- Remove kdump-anaconda subpackage

* Thu Jul 26 2018 Dave Young <dyoung@redhat.com> - 2.0.17-8

- Fix armv7hl build failure

* Thu Jul 26 2018 Dave Young <dyoung@redhat.com> - 2.0.17-7

- Remove koji build workaround patch

- kexec-tools.spec: Drop kexec-tools-2.0.3-disable-kexec-test.patch

- Remove obsolete kdump tool

- dracut-module-setup.sh: don't include multipath-hostonly

- kdumpctl: Rebuild initramfs if loaded kernel modules changed

* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.17-6

- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild

* Mon Jul 9 2018 Dave Young <dyoung@redhat.com> - 2.0.17-5

- Update makedumpfile 1.6.4

- dracut-module-setup.sh: pass ip=either6 param for ipv6

- dracut-module-setup.sh: install /etc/hosts when using fence_kdump

* Wed Jun 27 2018 Dave Young <dyoung@redhat.com> - 2.0.17-4

- kdump anaconda addon fix for rhbz1594827

* Wed May 30 2018 Dave Young <dyoung@redhat.com> - 2.0.17-3

- Add early kdump support in initramfs.

- move some common functions from kdumpctl to kdump-lib.sh

- Fix kdumpctl showmem

- kdumpctl: Remove 'netroot' and 'iscsi initiator' entries from kdump

- kdumpctl: add showmem cmd

- Revert "dracut-module-setup.sh: pass correct ip= param for ipv6"

* Sat Apr 28 2018 Dave Young <dyoung@redhat.com> - 2.0.17-2

- pull in makedumpfile 1.6.3 

* Sat Apr 28 2018 Dave Young <dyoung@redhat.com> - 2.0.17-1

- pull in 2.0.17

* Sun Apr 08 2018 Dave Young <dyoung@redhat.com> - 2.0.16-6

- kdump.sysconfig.ppc64(le): remove "root=" param from ppc64(le) 2nd kernel

- kdumpctl: Check the modification time of core_collector

- dracut-module-setup.sh: pass correct ip= param for ipv6

* Fri Feb 09 2018 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 2.0.16-5

- Escape macros in %%changelog

* Wed Feb 7 2018 Dave Young <dyoung@redhat.com> - 2.0.16-4

- update anaconda addon migrate with Anaconda changes.

* Fri Dec 8 2017 Dave Young <dyoung@redhat.com> - 2.0.16-3

- workaround koji build failure (rhbz1520805)

* Mon Dec 4 2017 Dave Young <dyoung@redhat.com> - 2.0.16-2

- dracut-module-setup.sh: check whether to include multipath-hostonly or not

- Revert "kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors"

- kdumpctl: skip selinux-relabel for dracut_args --mount dump target

* Tue Nov 21 2017 Dave Young <dyoung@redhat.com> - 2.0.16-1

- update to kexec-tools 2.0.16

* Thu Nov 9 2017 Dave Young <dyoung@redhat.com> - 2.0.15-15

- Use absolute path /usr/bin/dracut in mkdumprd

* Wed Oct 11 2017 Dave Young <dyoung@redhat.com> - 2.0.15-14

- kdumpctl: Error out in case there are white spaces before an option name

* Wed Sep 6 2017 Dave Young <dyoung@redhat.com> - 2.0.15-13

- dracut-module-setup.sh: eliminate redundant kdump_get_mac_addr call

- mkdumprd: use --quiet dracut argument to speedup initramfs build

- mkdumprd: fix patterns to modify mount options

- fadump: rebuild default initrd with dump capture capability

- module-setup: remove software iscsi cmdline generated by dracut

- kdumpctl: remove some cmdline inheritage from 1st kernel

- mkdumprd: apply dracut "--hostonly-cmdline" and "--no-hostonly-default-device"

- Change dump_to_rootfs to use "--mount" instead of "root=X"

- kdumpctl: move is_fadump_capable() to kdump-lib.sh

- Revert "kdumpctl: use generated rd.lvm.lv=X"

- Revert "mkdumprd: omit crypt when there is no crypt kdump target"

- Revert "mkdumprd: omit dracut modules in case of no dm target"

- Revert "mkdumprd: omit dracut modules in case of network dumping"

- update bogus date in rpm spec

* Thu Aug 17 2017 Dave Young <dyoung@redhat.com> - 2.0.15-12

- makedumpfile: fix 4.13 kernel larget vmcore bug

- Revert "Improve 'cpu add' udev rules"

* Tue Aug 15 2017 Dave Young <dyoung@redhat.com> - 2.0.15-11

- Own the /usr/share/makedumpfile dir

- Mark COPYING as %%license

* Tue Aug 8 2017 Dave Young <dyoung@redhat.com> - 2.0.15-10

- Improve 'cpu add' udev rules

- module-setup: suppress the early iscsi error messages

- mkdumprd: use 300s as the default systemd unit timeout for kdump mount 

* Mon Aug 7 2017 Dave Young <dyoung@redhat.com> - 2.0.15-9

- fix makedumpfile bug 1474706 

* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.15-8

- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild

* Sun Jul 30 2017 Florian Weimer <fweimer@redhat.com> - 2.0.15-7

- Rebuild with binutils fix for ppc64le (#1475636)

* Fri Jul 28 2017 Dave Young <dyoung@redhat.com> - 2.0.15-6

- update upstream makedumpfile 1.6.2

* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.15-5

- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild

* Wed Jul 19 2017 Dave Young <dyoung@redhat.com> - 2.0.15-4

- mkdumprd: remove useless "x-initrd.mount"

- kdumpctl: use "apicid" other than "initial apicid"

* Fri Jul 14 2017 Dave Young <dyoung@redhat.com> - 2.0.15-3

- module-setup: fix 99kdumpbase network dependency

- mkdumprd: omit dracut modules in case of network dumping

- mkdumprd: omit dracut modules in case of no dm target

- mkdumprd: omit crypt when there is no crypt kdump target

- kdumpctl: use generated rd.lvm.lv=X

- mkdumprd: change for_each_block_target() to use get_kdump_targets()

- kdump-lib.sh: introduce get_kdump_targets()

- kdump-lib.sh: fix improper get_block_dump_target()

- kdumpctl: fix infinite loop caused by running under bash

* Wed Jun 28 2017 Dave Young <dyoung@redhat.com> - 2.0.15-2

- enable makedumpfile for arm64

* Fri Jun 23 2017 Dave Young <dyoung@redhat.com> - 2.0.15-1