%global eppic_ver e8844d3793471163ae4a56d8f95897be9e5bd554

%global eppic_shortver %(c=%{eppic_ver}; echo ${c:0:7})

%global mkdf_ver 1.7.1

%global mkdf_shortver %(c=%{mkdf_ver}; echo ${c:0:7})

Name: kexec-tools

Version: 2.0.24

Release: 3%{?dist}

License: GPLv2

Summary: The kexec/kdump userspace component

Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.xz

Source1: kdumpctl

Source2: kdump.sysconfig

Source3: kdump.sysconfig.x86_64

Source4: kdump.sysconfig.i386

Source5: kdump.sysconfig.ppc64

Source7: mkdumprd

Source8: kdump.conf

Source9: https://github.com/makedumpfile/makedumpfile/archive/%{mkdf_ver}/makedumpfile-%{mkdf_shortver}.tar.gz

Source10: kexec-kdump-howto.txt

Source11: fadump-howto.txt

Source12: mkdumprd.8

Source13: 98-kexec.rules

Source14: 98-kexec.rules.ppc64

Source15: kdump.conf.5

Source16: kdump.service

Source18: kdump.sysconfig.s390x

Source19: https://github.com/lucchouina/eppic/archive/%{eppic_ver}/eppic-%{eppic_shortver}.tar.gz

Source20: kdump-lib.sh

Source21: kdump-in-cluster-environment.txt

Source22: kdump-dep-generator.sh

Source23: kdump-lib-initramfs.sh

Source24: kdump.sysconfig.ppc64le

Source25: kdumpctl.8

Source26: live-image-kdump-howto.txt

Source27: early-kdump-howto.txt

Source28: kdump-udev-throttler

Source29: kdump.sysconfig.aarch64

Source30: 60-kdump.install

Source31: kdump-logger.sh

Source32: mkfadumprd

Source33: 92-crashkernel.install

Source34: crashkernel-howto.txt

Source35: kdump-migrate-action.sh

Source36: kdump-restart.sh

Source37: supported-kdump-targets.txt

#######################################

# These are sources for mkdumpramfs

# Which is currently in development

#######################################

Source100: dracut-kdump.sh

Source101: dracut-module-setup.sh

Source102: dracut-monitor_dd_progress

Source104: dracut-kdump-emergency.service

Source106: dracut-kdump-capture.service

Source107: dracut-kdump-emergency.target

Source108: dracut-early-kdump.sh

Source109: dracut-early-kdump-module-setup.sh

Source200: dracut-fadump-init-fadump.sh

Source201: dracut-fadump-module-setup.sh

%ifarch ppc64 ppc64le

Requires(post): servicelog

Recommends: keyutils

%endif

Requires(pre): coreutils sed zlib

Requires: dracut >= 050

Requires: dracut-network >= 050

Requires: dracut-squash >= 050

Requires: ethtool

Recommends: zstd

Recommends: grubby

Recommends: hostname

BuildRequires: make

BuildRequires: zlib-devel elfutils-devel glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel libzstd-devel

BuildRequires: pkgconfig intltool gettext

BuildRequires: systemd-rpm-macros

BuildRequires: automake autoconf libtool

%ifarch %{ix86} x86_64 ppc64 ppc s390x ppc64le

Obsoletes: diskdumputils netdump kexec-tools-eppic

%endif

%ifnarch s390x

Requires:       systemd-udev%{?_isa}

%endif

#START INSERT

#

# Patches 0 through 100 are meant for x86 kexec-tools enablement

#

#

# Patches 101 through 200 are meant for x86_64 kexec-tools enablement

#

#

# Patches 301 through 400 are meant for ppc64 kexec-tools enablement

#

#

# Patches 401 through 500 are meant for s390 kexec-tools enablement

#

#

# Patches 501 through 600 are meant for ARM kexec-tools enablement

#

#

# Patches 601 onward are generic patches

#

Patch601: ./kexec-tools-2.0.23-makedumpfile-Avoid_false_positive_mem_section_validation_with_vmlinux.patch

%description

kexec-tools provides /sbin/kexec binary that facilitates a new

kernel to boot using the kernel's kexec feature either on a

normal or a panic reboot. This package contains the /sbin/kexec

binary and ancillary utilities that together form the userspace

component of the kernel's kexec feature.

%prep

%setup -q

mkdir -p -m755 kcp

tar -z -x -v -f %{SOURCE9}

tar -z -x -v -f %{SOURCE19}

%patch601 -p1

%ifarch ppc

%define archdef ARCH=ppc

%endif

%build

autoreconf

%configure \

%ifarch ppc64

    --host=powerpc64-redhat-linux-gnu \

    --build=powerpc64-redhat-linux-gnu \

%endif

%ifarch ppc64le

    --host=powerpc64le-redhat-linux-gnu \

    --build=powerpc64le-redhat-linux-gnu \

%endif

    --sbindir=/usr/sbin

rm -f kexec-tools.spec.in

# setup the docs

cp %{SOURCE10} .

cp %{SOURCE11} .

cp %{SOURCE21} .

cp %{SOURCE26} .

cp %{SOURCE27} .

cp %{SOURCE34} .

cp %{SOURCE37} .

make

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

make -C eppic-%{eppic_ver}/libeppic

make -C makedumpfile-%{mkdf_ver} LINKTYPE=dynamic USELZO=on USESNAPPY=on USEZSTD=on

make -C makedumpfile-%{mkdf_ver} LDFLAGS="$LDFLAGS -I../eppic-%{eppic_ver}/libeppic -L../eppic-%{eppic_ver}/libeppic" eppic_makedumpfile.so

%endif

%install

mkdir -p -m755 $RPM_BUILD_ROOT/usr/sbin

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/pre.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/kdump/post.d

mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/

mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/

mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_udevrulesdir}

mkdir -p $RPM_BUILD_ROOT%{_unitdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}

mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump

mkdir -p -m755 $RPM_BUILD_ROOT%{_sharedstatedir}/kdump

install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl

install -m 755 build/sbin/kexec $RPM_BUILD_ROOT/usr/sbin/kexec

install -m 755 build/sbin/vmcore-dmesg $RPM_BUILD_ROOT/usr/sbin/vmcore-dmesg

install -m 644 build/man/man8/kexec.8  $RPM_BUILD_ROOT%{_mandir}/man8/

install -m 644 build/man/man8/vmcore-dmesg.8  $RPM_BUILD_ROOT%{_mandir}/man8/

SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}

[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig

install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump

install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/usr/sbin/mkdumprd

install -m 755 %{SOURCE32} $RPM_BUILD_ROOT/usr/sbin/mkfadumprd

install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf

install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8

install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8

install -m 644 %{SOURCE25} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8

install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh

install -m 755 %{SOURCE23} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh

install -m 755 %{SOURCE31} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-logger.sh

%ifarch ppc64 ppc64le

install -m 755 %{SOURCE35} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-migrate-action.sh

install -m 755 %{SOURCE36} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-restart.sh

%endif

%ifnarch s390x

install -m 755 %{SOURCE28} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler

%endif

%ifnarch s390x ppc64 ppc64le

# For s390x the ELF header is created in the kdump kernel and therefore kexec

# udev rules are not required

install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

%endif

%ifarch ppc64 ppc64le

install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules

%endif

install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5

install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service

install -m 755 -D %{SOURCE22} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

install -m 755 -D %{SOURCE30} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-kdump.install

install -m 755 -D %{SOURCE33} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/92-crashkernel.install

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

install -m 755 makedumpfile-%{mkdf_ver}/makedumpfile $RPM_BUILD_ROOT/usr/sbin/makedumpfile

gzip -c makedumpfile-%{mkdf_ver}/makedumpfile.8 > makedumpfile-%{mkdf_ver}/makedumpfile.8.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz

gzip -c makedumpfile-%{mkdf_ver}/makedumpfile.conf.5 > makedumpfile-%{mkdf_ver}/makedumpfile.conf.5.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz

install -m 644 makedumpfile-%{mkdf_ver}/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample

install -m 755 makedumpfile-%{mkdf_ver}/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so

mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

install -m 644 makedumpfile-%{mkdf_ver}/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/

%endif

%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')

%define remove_dracut_early_kdump_prefix() %(echo -n %1|sed 's/.*dracut-early-kdump-//g')

%define remove_dracut_fadump_prefix() %(echo -n %1|sed 's/.*dracut-fadump-//g')

# deal with dracut modules

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase

cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}

cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE104}}

cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}}

cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump

cp %{SOURCE108} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

cp %{SOURCE109} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}

%ifarch ppc64 ppc64le

mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit

cp %{SOURCE200} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}}

cp %{SOURCE201} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}}

chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}}

%endif

%define dracutlibdir %{_prefix}/lib/dracut

#and move the custom dracut modules to the dracut directory

mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/

%pre

# save the old default crashkernel values to /tmp/ when upgrading the package

if ! grep -qs "ostree" /proc/cmdline && [ $1 == 2 ] && grep -q get-default-crashkernel /usr/bin/kdumpctl; then

  kdumpctl get-default-crashkernel kdump > /tmp/old_default_crashkernel 2>/dev/null

%ifarch ppc64 ppc64le

  kdumpctl get-default-crashkernel fadump > /tmp/old_default_crashkernel_fadump 2>/dev/null

%endif

fi

%post

# Initial installation

%systemd_post kdump.service

touch /etc/kdump.conf

%ifarch ppc64 ppc64le

servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh 2>/dev/null

servicelog_notify --add --command=/usr/lib/kdump/kdump-migrate-action.sh --match='refcode="#MIGRATE" and serviceable=0' --type=EVENT --method=pairs_stdin

%endif

# This portion of the script is temporary.  Its only here

# to fix up broken boxes that require special settings 

# in /etc/sysconfig/kdump.  It will be removed when 

# These systems are fixed.

if [ -d /proc/bus/mckinley ]

then

	# This is for HP zx1 machines

	# They require machvec=dig on the kernel command line

	sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

elif [ -d /proc/sgi_sn ]

then

	# This is for SGI SN boxes

	# They require the --noio option to kexec 

	# since they don't support legacy io

	sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \

	/etc/sysconfig/kdump > /etc/sysconfig/kdump.new

	mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump

fi

%postun

%systemd_postun_with_restart kdump.service

%preun

%ifarch ppc64 ppc64le

servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh

%endif

%systemd_preun kdump.service

%triggerin -- kernel-kdump

touch %{_sysconfdir}/kdump.conf

%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump

# List out the initrds here, strip out version nubmers

# and search for corresponding kernel installs, if a kernel

# is not found, remove the corresponding kdump initrd

IMGDIR=/boot

for i in `ls $IMGDIR/initramfs*kdump.img 2>/dev/null`

do

	KDVER=`echo $i | sed -e's/^.*initramfs-//' -e's/kdump.*$//'`

	if [ ! -e $IMGDIR/vmlinuz-$KDVER ]

	then

		# We have found an initrd with no corresponding kernel

		# so we should be able to remove it

		rm -f $i

	fi

done

%posttrans

# try to reset kernel crashkernel value to new default value when upgrading

# the package

if ! grep -qs "ostree" /proc/cmdline && [ $1 == 1 ]; then

  kdumpctl reset-crashkernel-after-update

  rm /tmp/old_default_crashkernel 2>/dev/null

%ifarch ppc64 ppc64le

  rm /tmp/old_default_crashkernel_fadump 2>/dev/null

%endif

  # dnf would complain about the exit code not being 0. To keep it happy,

  # always return 0

  :

fi

%files

/usr/sbin/kexec

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

/usr/sbin/makedumpfile

%endif

/usr/sbin/mkdumprd

/usr/sbin/mkfadumprd

/usr/sbin/vmcore-dmesg

%{_bindir}/*

%{_datadir}/kdump

%{_prefix}/lib/kdump

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_sysconfdir}/makedumpfile.conf.sample

%endif

%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump

%config(noreplace,missingok) %verify(not mtime) %{_sysconfdir}/kdump.conf

%ifnarch s390x

%config %{_udevrulesdir}

%{_udevrulesdir}/../kdump-udev-throttler

%endif

%{dracutlibdir}/modules.d/*

%dir %{_localstatedir}/crash

%dir %{_sysconfdir}/kdump

%dir %{_sysconfdir}/kdump/pre.d

%dir %{_sysconfdir}/kdump/post.d

%dir %{_sharedstatedir}/kdump

%{_mandir}/man8/kdumpctl.8.gz

%{_mandir}/man8/kexec.8.gz

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_mandir}/man8/makedumpfile.8.gz

%endif

%{_mandir}/man8/mkdumprd.8.gz

%{_mandir}/man8/vmcore-dmesg.8.gz

%{_mandir}/man5/*

%{_unitdir}/kdump.service

%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh

%{_prefix}/lib/kernel/install.d/60-kdump.install

%{_prefix}/lib/kernel/install.d/92-crashkernel.install

%doc News

%license COPYING

%doc TODO

%doc kexec-kdump-howto.txt

%doc early-kdump-howto.txt

%doc fadump-howto.txt

%doc kdump-in-cluster-environment.txt

%doc live-image-kdump-howto.txt

%doc crashkernel-howto.txt

%doc supported-kdump-targets.txt

%ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64

%{_libdir}/eppic_makedumpfile.so

/usr/share/makedumpfile/

%endif

%changelog

* Tue Jun 7 2022 Tao Liu <ltao@redhat.com> - 2.0.24-3

- kdump.sysconfig*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE

* Thu May 23 2022 Tao Liu <ltao@redhat.com> - 2.0.24-2

- remove the upper bound of default crashkernel value example

- update fadump-howto

- update kexec-kdump-howto

- update crashkernel-howto

- add man documentation for kdumpctl get-default-crashkernel

- improve get_recommend_size

- fix a calculation error in get_system_size

* Thu May 5 2022 Tao Liu <ltao@redhat.com> - 2.0.24-1

- Rebase kexec-tools to v2.0.24

- Rebase makedumpfile to 1.7.1

- Avoid false-positive mem_section validation with vmlinux

* Fri Apr 8 2022 Tao Liu <ltao@redhat.com> - 2.0.23-10

- try to update the crashkernel in GRUB_ETC_DEFAULT after kexec-tools updates the default crashkernel value

- address the case where there are multiple values for the same kernel arg

- s390: add support for --reuse-cmdline

- use slurp_proc_file() in get_command_line()

- add slurp_proc_file()

- s390: use KEXEC_ALL_OPTIONS

- s390: add variable command line size

- util_lib/elf_info: harden parsing of printk buffer

- print error when reading with unsupported compression

- use cycle detection when parsing the prink log_buf

- use pointer arithmetics for dump_dmesg

- add generic cycle detection

* Fri Feb 25 2022 Tao Liu <ltao@redhat.com> - 2.0.23-9

- makedumpfile: sadump, kaslr: fix failure of calculating kaslr_offset

* Mon Feb 21 2022 Tao Liu <ltao@redhat.com> - 2.0.23-8

- update kernel crashkernel in posttrans RPM scriptlet when updating kexec-tools

* Mon Feb 14 2022 Tao Liu <ltao@redhat.com> - 2.0.23-7

- fix incorrect usage of _get_all_kernels_from_grubby

- fix the mistake of swapping function parameters of read_proc_environ_var

* Wed Jan 26 2022 Tao Liu <ltao@redhat.com> - 2.0.23-6

- Revert "Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel"

- fix broken kdump_get_arch_recommend_size

- remove the upper bound of 102400T for the range in default crashkernel

- fix the error of parsing the container environ variable for osbuild

- mkdumprd (RHEL-only): add nvme module by force

- Remove dropped patches

- s390: handle R_390_PLT32DBL reloc entries in machine_apply_elf_rel()

- spec: add hostname.rpm into Recommends list

- move variable FENCE_KDUMP_SEND from kdump-lib.sh to kdump-lib-initramfs.sh

* Tue Jan 11 2022 Tao Liu <ltao@redhat.com> - 2.0.23-5

- Set zstd as recommented for kexec-tools

- fix "kdump: Invalid kdump config option auto_reset_crashkernel" error

- use grep -s to suppress error messages about nonexistent or unreadable files

* Thu Jan 6 2022 Tao Liu <ltao@redhat.com> - 2.0.23-4

- Set zstd as the default compression method for kdump initrd

- kdump-lib.sh: Escape '|' for 'failure_action|default' in is_dump_to_rootfs

- dracut-early-kdump-module-setup.sh: install xargs and kdump-lib-initramfs.sh

- update crashkernel-howto

- set up kernel crashkernel for osbuild in kernel hook

- reset kernel crashkernel for the special case where the kernel is updated right after kexec-tools

- try to reset kernel crashkernel when kexec-tools updates the default crashkernel value

- introduce the auto_reset_crashkernel option to kdump.conf

- rewrite reset_crashkernel to support fadump and to used by RPM scriptlet

- fix incorrect usage of rpm-ostree to update kernel command line parameters

- add helper functions to get kernel path by kernel release and the path of current running kernel

- add helper functions to get dump mode

- add a helper function to read kernel cmdline parameter from grubby --info

- provide kdumpctl get-default-crashkernel for kdump_anaconda_addon and RPM scriptlet

- factor out kdump_get_arch_recommend_crashkernel

- update default crashkernel value

- ppc64/ppc64le: drop cpu online rule in 40-redhat.rules in kdump initramfs

* Wed Dec 8 2021 Tao Liu <ltao@redhat.com> - 2.0.23-3

- Update eppic to latest upstream snapshot

- Update crashkernel-howto.txt

- Remove references to systemd-sysv-convert

- kdump/ppc64: suppress the error message "Could not find a registered notification tool" from servicelog_notify

- fadump: improve fadump-howto.txt about remote dump target setup

- Don't exit 1 from 92-crashkernel.install if zipl is absent (#1993505)

- Document/kexec-kdump-howto.txt: improve notes for kdump_pre and kdump_post scripts

* Fri Dec 3 2021 Tao Liu <ltao@redhat.com> - 2.0.23-2

- kdump/ppc64: migration action registration clean up

- kdump/ppc64: rebuild initramfs image after migration

- Update supported-kdump-targets.txt

- add keyutils as a weak dependency for POWER

- kdumpctl: enable secure boot on ppc64le LPARs

- kdump.sysconfig: make kexec_file_load as default option on arm64

- kdump.sysconfig: make kexec_file_load as default option on ppc64le

* Thu Nov 11 2021 Tao Liu <ltao@redhat.com> - 2.0.23-1

- Enable zstd compression for makedumpfile in kexec-tools.spec

- Update makedumpfile to 1.7.0

* Wed Nov 10 2021 Tao Liu <ltao@redhat.com> - 2.0.22-16

- fix broken extra_bins when installing multiple binaries

- mkdumprd: drop mountaddr/mountproto nfs mount options

- 92-crashkernel.install: fix exit code

- dracut-early-kdump.sh: make it POSIX compatible

- Add header comment for POSIX compliant scripts

- mkdumprd: allow using dash

- kdump-logger.sh: make it POSIX compatible

- kdump-lib.sh: reformat with shfmt

- kdump-lib.sh: declare and assign separately

- kdump-lib.sh: fix variable quoting issue

- Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel

- kdump-lib.sh: fix a few ambiguous or redundant code

- kdump-lib.sh: fix arithmetic operation syntax

- kdump-lib.sh: remove useless echo and cat

- kdump-lib.sh: rework nmcli related functions

- kdump-lib.sh: replace '[ ]' with '[[ ]]' and get rid of legacy ``

- kdump-lib-initramfs.sh: make it POSIX compatible

- dracut-kdump.sh: reformat with shfmt

- dracut-kdump.sh: make it POSIX compatible

- dracut-kdump.sh: POSIX doesn't support pipefail

- dracut-kdump.sh: Use stat instead of ls to get vmcore size

- dracut-kdump.sh: simplify dump_ssh

- dracut-kdump.sh: remove add_dump_code

- dracut-kdump.sh: don't put KDUMP_SCRIPT_DIR in PATH

- kdump-lib-initramfs.sh: move dump related functions to kdump.sh

- Merge kdump-error-handler.sh into kdump.sh

- kdump-lib-initramfs.sh: prepare to be a POSIX compatible lib

- bash scripts: reformat with shfmt

- bash scripts: declare and assign separately

- bash scripts: fix redundant exit code check

- bash scripts: fix variable quoting issue

- Don't use die in dracut-module-setup.sh

- bash scripts: replace '[ ]' with '[[ ]]' for bash scripts

- mkdumprd: display the absolute path of dump location in the check_user_configured_target()

- Don't iterate the whole /sys/devices just to find drm device

- mkdumprd: prompt the user to install nfs-utils when mounting NFS fs failed

- bash scripts: use $(...) notation instead of legacy `...`

- bash scripts: always use "read -r"

- bash scripts: get rid of unnecessary sed calls

- bash scripts: get rid of expr and let

- bash scripts: remove useless cat

- dracut-module-setup.sh: remove surrounding $() for subshell

- dracut-module-setup.sh: make iscsi check fail early if cd failed

- dracut-module-setup.sh: fix a loop over ls issue

- dracut-module-setup.sh: fix a ambiguous variable reference

- dracut-module-setup.sh: use "*" to expend array as string

- dracut-module-setup.sh: fix _bondoptions wrong references

- dracut-module-setup.sh: remove an unused variable

- dracut-module-setup.sh: rework kdump_get_ip_route_field

- mkfadumprd: make _dracut_isolate_args an array

- mkdumprd: use array to store ssh arguments in mkdir_save_path_ssh

- mkdumprd: remove an awk call in get_fs_size

- mkdumprd: fix multiple issues with get_ssh_size

- mkdumprd: remove some redundant echo

- mkdumprd: make dracut_args an array again

- mkdumprd: use kdump_get_conf_val to read config values

- kdumpctl: refine grep usage

- kdumpctl: fix fragile loops over find output

- kdumpctl: use kdump_get_conf_val to read config values

- kdump-lib.sh: use kdump_get_conf_val to read config values

- kdump-lib.sh: add a config value retrive helper

- kdump-lib.sh: add a config format and read helper

- Add a .editorconfig file

- Remove hard requirement on grubby

* Wed Sep 8 2021 Tao Liu <ltao@redhat.com> - 2.0.22-15

- Add file supported-kdump-targets.txt to kexec-tools

* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 2.0.22-14

- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags

  Related: rhbz#1991688

* Mon Aug 9 2021 Tao Liu <ltao@redhat.com> - 2.0.22-13

- Clear old crashkernl=auto in comment and doc

* Mon Aug 2 2021 Tao Liu <ltao@redhat.com> - 2.0.22-12

- kdumpctl: fix a typo

- kdump_get_arch_recommend_size uses crashkernel.default

* Mon Jul 26 2021 Tao Liu <ltao@redhat.com> - 2.0.22-11

- Make `dump_to_rootfs` wait for 90s for real

- Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand

- kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline

* Tue Jul 20 2021 Tao Liu <ltao@redhat.com> - 2.0.22-10

- fadump-init: clean up mount points properly

- fadump: kdumpctl should check the modules used by the fadump initramfs

- fadump: isolate fadump initramfs image within the default one

- Cleanup dead systemd services before start sysroot.mount

- Revert "Revert "x86_64: enable the kexec file load by default""

* Tue Jun 29 2021 Tao Liu <ltao@redhat.com> - 2.0.22-9

- Add a crashkernel-howto.txt doc

- Add a new hook: 92-crashkernel.install

- kdumpctl: Add kdumpctl reset-crashkernel

- Revert "kdump-lib.sh: Remove is_atomic"

- fix format issue in find_online_znet_device

- check the existence of /sys/bus/ccwgroup/devices before trying to find online network device

* Tue Jun 29 2021 Tao Liu <ltao@redhat.com> - 2.0.22-8

- check for invalid physical address of /proc/kcore when making ELF dumpfile

- Increase SECTION_MAP_LAST_BIT to 5

- kdumpctl: fix check_config error when kdump.conf is empty

- kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()

* Wed Jun 23 2021 Tao Liu <ltao@redhat.com> - 2.0.22-7

- Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable

* Wed Jun 16 2021 Tao Liu <ltao@redhat.com> - 2.0.22-6

- Add gating.yaml to RHEL-9 kexec-tools

- Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet

* Mon Jun 7 2021 Tao Liu <ltao@redhat.com> - 2.0.22-5

- Use a customized emergency shell

- Remove the kdump error handler isolation wrapper

- Don's try to restart dracut-initqueue if it's already there

* Thu May 27 2021 Tao Liu <ltao@redhat.com> - 2.0.22-4

- kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()

* Mon May 24 2021 Tao Liu <ltao@redhat.com> - 2.0.22-3

- kdumpctl: Add kdumpctl estimate

- mkdumprd: make use of the new get_luks_crypt_dev helper

- kdump-lib.sh: introduce a helper to get all crypt dev used by kdump

- kdump-lib.sh: introduce a helper to get underlying crypt device

- Revert "Always set vm.zone_reclaim_mode = 3 in kdump kernel"

* Fri May 14 2021 Tao Liu <ltao@redhat.com> - 2.0.22-2

- Stop reloading kdump service on CPU hotplug event for FADump

- Make dracut-squash required for kexec-tools

- Fix incorrect file permissions of vmcore-dmesg-incomplete.txt

- Disable CMA in kdump 2nd kernel

- update makedumpfile to v1.6.9

- (upstream/c9s) Warn the user if network scripts are used

- Set up bond cmdline by "nmcli --get-values"

- Set up dns cmdline by parsing "nmcli --get-values"

- Set up s390 znet cmdline by "nmcli --get-values"

- Add helper to get nmcli connection show cmd by ifname

- Add helper to get nmcli connection apath by ifname

- Add helper to get value by field using "nmcli --get-values"

* Thu May 13 2021 Tao Liu <ltao@redhat.com> - 2.0.22-1

- Update to kexec-tools 2.0.22

- rd.route should use the name from kdump_setup_ifname

- get kdump ifname once in kdump_install_net

- Implement IP netmask calculation to replace "ipcalc -m"

- kdump-lib.sh: introduce functions to return recommened mem size

* Sun Apr 25 2021 Tao Liu <ltao@redhat.com> - 2.0.21-7

- Fix incorrect vmcore permissions when dumped through ssh

- Fix incorrect permissions on kdump dmesg file

* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 2.0.21-6

- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937

* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.21-5

- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild

* Fri Jan 22 2021 Kairui Song <kasong@redhat.com> - 2.0.21-4

- dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode

- kdump.conf: add ipv6 example for nfs and ssh dump

- fix kdump failure of saving vmcore with the scp + ipv6 method

* Wed Jan 20 2021 Kairui Song <kasong@redhat.com> - 2.0.21-3

- module-setup.sh: don't polute the namespace unnecessarily

- module-setup.sh: don't source $dracutfunctions

- logger: source the logger file individually

- Fix dump_fs mount point detection and fallback mount

- Revert "Don's try to restart dracut-initqueue if it's already failed"

- Revert "Append both nofail and x-systemd.before to kdump mount target"

- Doc: Improve the kdump sysconfig document

- kdump.conf: Update doc about core_collector for ssh target

- Merge #4 `Make dracut-squash a weak dep`

- Fix a date error in the change log

* Fri Jan 08 2021 Kairui Song <kasong@redhat.com> - 2.0.21-2

- makedumpfile: make use of 'uts_namespace.name' offset in VMCOREINFO

- kdumpctl: fix a variable expansion in check_fence_kdump_config()

- Add BuildRequires: make

- Save the final failure information to log file if saving vmcore failed

* Wed Dec 23 2020 Kairui Song <kasong@redhat.com> - 2.0.21-1

- makedumpfile: printk: use committed/finalized state values

- makedumpfile: printk: add support for lockless ringbuffer

- dracut-module-setup.sh: Use systemctl call to replace ln_r

- Doc: improve mkdumprd man page

- Don's try to restart dracut-initqueue if it's already failed

- dracut-module-setup.sh: use auto6 for ipv6

* Mon Nov 30 2020 Kairui Song <kasong@redhat.com> - 2.0.20-21

- Rebase makedumpfile to 1.6.8

- fadump-howto: update about 'nocma' and 'off' options for 'fadump=' parameter

- module-setup.sh: enable vlan on team interface

- kdump-lib: Fix get_bind_mount_source to support btrfs and fstab

- Make get_mount_info work with bind mount

- Set watchdog's pretimeout to zero in kdump kernel

- kdump-lib.sh: Use a more generic helper to detect omitted dracut module

- Fix the watchdog drivers detection code

- Add a helper for detecting watchdog drivers

- Remove a redundant nfs check

- kdumpctl: split the driver detection from fs dection function

* Thu Nov 19 2020 Kairui Song <kasong@redhat.com> - 2.0.20-20

- selftest: Fix several test issue with Fedora 33

- selftest: add more detailed log and fix a test failure issue

- selftest: Update test base image to Fedora 33

- selftest: Fix qcow2 image format detect

- selftest: Always use the get_image_fmt helper

- Doc: improve the usage documentation of the logger

- Update the kdump sysconfig

- Capitalize the configuration name of log level

- Add the rd.kdumploglvl option to control log level in the second kernel

- Appropriately converts logger numeric level to syslog log level

- Remove unused log levels for kdump logger

- Add sanity checks for the log levels

- Move watchdog detect and install code to module-setup.sh

- Add a helper to omit non-mandatory dracut module

- Move some dracut module dependencies checks to module-setup.sh

- Add code comments to help better understanding

* Thu Nov 05 2020 Kairui Song <kasong@redhat.com> - 2.0.20-19

- Fix comment about ssh dump target

- mkdumprd: Ensure kdumpbase is added

- kdump.service: use ConditionKernelCommandLine=crashkernel

- Revert "Revert "s390x: enable the kexec file load by def

- increase makdumpfile default message level to 7

- Fix error when using raw target with opalcore

- module-setup.sh: Instead of drop journalctl log, just don't read kmsg

- Doc: add a documentation for the usage of logger

- Improve debugging in the kdump kernel

- kdumpctl: add the '-d' option to enable the kexec loading debugging messages

- kdump.sysconfig: add the kdump logger configurations

- enable the logger for kdump

- introduce the kdump logger from the dracut

- Rework check_config and warn on any duplicated option

- (watchdog) kdump-lib.sh: detect secure boot on s390

- Don't drop journalctl content if failure action is "shell"

- dracut-module-install: Move systemd conf install code to a function

- selftest: Show the path of dumped vmcore on test end

- selftest: Add document for selftests

- selftest: Add basic test framework

- selftest: Add basic infrastructure to build test image

* Thu Aug 27 2020 Kairui Song <kasong@redhat.com> - 2.0.20-18

- mkdumprd: Improve the warning message when using encrypted target

- kdump-lib.sh: Remove is_atomic

- Refactor kernel image and initrd detection code

- early-kdump: Use consistent symbol link for kernel and initramfs

- Add a kernel install hook to clean up kdump initramfs

* Tue Aug 04 2020 Kairui Song <kasong@redhat.com> - 2.0.20-17

- Drop static lib dependencies

- Revert "x86_64: enable the kexec file load by default"

- Revert "s390x: enable the kexec file load by default"

- kdumpctl: exit if either pre.d or post.d is missing

- kdump_pre: make notes more precise

- dracut-kdump.sh: exit shell when machine reboot

- kdumpctl: detect modification of scripts by its directory's timestamp

- module-setup.sh: suppress false alarm

- kexec-tools.spec: make the existence of pre.d and post.d mandatory

- ppc64/kdump: use kexec_file_load when secureboot is enabled

* Sat Aug 01 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.20-16

- Second attempt - Rebuilt for

  https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild

* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.20-15

- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild

* Wed Jul 1 2020 Kairui Song <kasong@redhat.com> - 2.0.20-14

- s390x: enable the kexec file load by default

- x86_64: enable the kexec file load by default

- Revert "s390x: add kdump sysconfig option to use the kexec_file_load() syscall"

- Revert "kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default"

- kdump.conf: fix a grammar issue

- man: improve description about /etc/kdump/{pre.d,post.d}interface

- mkdumprd: Improve the error message for umounted dump target

- mkdumprd: Fix nfs detection in to_mount

- Always wrap up call to dracut get_persistent_dev function

- s390x: add kdump sysconfig option to use the kexec_file_load() syscall

- mkdumprd: Fix dracut error on multiple extra_modules

- Fix kdump failure when mount target specified by dracut_args

- kdump.conf: Specify /etc/kdump/{pre.d,post.d}interface

- dracut-kdump.sh: Execute the binary and script filesin /etc/kdump/{pre.d,post.d}

- kdumpctl: Check the update of the binary and script files in /etc/kdump/{pre.d,post.d}

- dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs

- Drop switch root capability for non fadump initramfs

- fadump: update fadump-howto.txt with some more troubleshooting help

- fadump-howto.txt: source it in spec file

- Don't inherit swiotlb parameter form 1st kernel by default

- module-setup.sh: Add "rd.neednet" parameter if network is needed

- Revert "Add a hook to wait for kdump target in initqueue"

- kdump.sysconfig: Remove the option 'log_buf_len' from kdump command line

* Fri May 22 2020 Kairui Song <kasong@redhat.com> - 2.0.20-13

- Update docs for the new noauto dump target support

- kexec-kdump-howto.txt: Add some format to the document

- mkdumprd: generate usable kdump initramfs even target is not mounted

- User get_mount_info to replace findmnt calls

- kdump-lib.sh: add fstab failback helper for getting mount info

- Allow calling mkdumprd from kdumpctl even if targat not mounted

- Add a is_mounted helper

- Introduce get_kdump_mntpoint_from_target and fix duplicated /

- Append both nofail and x-systemd.before to kdump mount target

- Fix the problem that kdump prints redundant /