#!/bin/bash

kdump_module_init() {

    if ! [[ -d "${initdir}/tmp" ]]; then

        mkdir -p "${initdir}/tmp"

    fi

    . /lib/kdump/kdump-lib.sh

}

check() {

    [[ $debug ]] && set -x

    #kdumpctl sets this explicitly

    if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]

    then

        return 1

    fi

    return 0

}

depends() {

    local _dep="base shutdown"

    kdump_module_init

    add_opt_module() {

        [[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1"

    }

    is_squash_available() {

        for kmodule in squashfs overlay loop; do

            if [ -z "$KDUMP_KERNELVER" ]; then

                modprobe --dry-run $kmodule &>/dev/null || return 1

            else

                modprobe -S $KDUMP_KERNELVER --dry-run $kmodule &>/dev/null || return 1

            fi

        done

    }

    if is_squash_available && ! is_fadump_capable; then

        add_opt_module squash

    else

        dwarning "Required modules to build a squashed kdump image is missing!"

    fi

    if is_wdt_active; then

        add_opt_module watchdog

    fi

    if is_ssh_dump_target; then

        _dep="$_dep ssh-client"

    fi

    if [ "$(uname -m)" = "s390x" ]; then

        _dep="$_dep znet"

    fi

    if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then

        add_opt_module drm

    fi

    if is_generic_fence_kdump || is_pcs_fence_kdump; then

        _dep="$_dep network"

    fi

    echo $_dep

}

kdump_is_bridge() {

     [ -d /sys/class/net/"$1"/bridge ]

}

kdump_is_bond() {

     [ -d /sys/class/net/"$1"/bonding ]

}

kdump_is_team() {

     [ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null

}

kdump_is_vlan() {

     [ -f /proc/net/vlan/"$1" ]

}

# $1: netdev name

source_ifcfg_file() {

    local ifcfg_file

    dwarning "Network Scripts are deprecated. You are encouraged to set up network by NetworkManager."

    ifcfg_file=$(get_ifcfg_filename $1)

    if [ -f "${ifcfg_file}" ]; then

        . ${ifcfg_file}

    else

        dwarning "The ifcfg file of $1 is not found!"

    fi

}

# $1: nmcli connection show output

kdump_setup_dns() {

    local _netdev="$1"

    local _nm_show_cmd="$2"

    local _nameserver _dns _tmp array

    local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf

    _tmp=$(get_nmcli_value_by_field "$_nm_show_cmd" "IP4.DNS")

    array=(${_tmp//|/ })

    if [[ ${array[@]} ]]; then

        for _dns in "${array[@]}"

        do

            echo "nameserver=$_dns" >> "$_dnsfile"

        done

    else

        dwarning "Failed to get DNS info via nmcli output. Now try sourcing ifcfg script"

        source_ifcfg_file "$_netdev"

        [ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile"

        [ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile"

    fi

    while read content;

    do

        _nameserver=$(echo $content | grep ^nameserver)

        [ -z "$_nameserver" ] && continue

        _dns=$(echo $_nameserver | cut -d' ' -f2)

        [ -z "$_dns" ] && continue

        if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then

            echo "nameserver=$_dns" >> "$_dnsfile"

        fi

    done < "/etc/resolv.conf"

}

# $1: repeat times

# $2: string to be repeated

# $3: separator

repeatedly_join_str() {

    local _count="$1"

    local _str="$2"

    local _separator="$3"

    local i _res

    if [[ "$_count" -le 0 ]]; then

        echo -n ""

        return

    fi

    i=0

    _res="$_str"

    ((_count--))

    while [[ "$i" -lt "$_count" ]]; do

        ((i++))

        _res="${_res}${_separator}${_str}"

    done

    echo -n "$_res"

}

# $1: prefix

# $2: ipv6_flag="-6" indicates it's IPv6

# Given a prefix, calculate the netmask (equivalent of "ipcalc -m")

# by concatenating three parts,

#  1) the groups with all bits set 1

#  2) a group with partial bits set to 0

#  3) the groups with all bits set to 0

cal_netmask_by_prefix() {

    local _prefix="$1"

    local _ipv6_flag="$2" _ipv6

    local _bits_per_octet=8

    local _count _res _octets_per_group _octets_total _seperator _total_groups

    local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits

    if [[ "$_ipv6_flag" == "-6" ]]; then

        _ipv6=1

    else

        _ipv6=0

    fi

    if [[ "$_prefix" -lt 0  ||  "$_prefix" -gt 128 ]] || \

        ( ((!_ipv6)) && [[ "$_prefix" -gt 32 ]] ); then

        derror "Bad prefix:$_prefix for calculating netmask"

        exit 1

    fi

    if ((_ipv6)); then

        _octets_per_group=2

        _octets_total=16

        _seperator=":"

    else

        _octets_per_group=1

        _octets_total=4

        _seperator="."

    fi

    _total_groups=$((_octets_total/_octets_per_group))

    _bits_per_group=$((_octets_per_group * _bits_per_octet))

    _max_group_value=$(((1 << _bits_per_group) - 1))

    if ((_ipv6)); then

        _max_group_value_repr=$(printf "%x" $_max_group_value)

    else

        _max_group_value_repr="$_max_group_value"

    fi

    _count=$((_prefix/_octets_per_group/_bits_per_octet))

    _first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator")

    _res="$_first_part"

    _tmp=$((_octets_total*_bits_per_octet-_prefix))

    _zero_bits=$(expr $_tmp % $_bits_per_group)

    if [[ "$_zero_bits" -ne 0 ]]; then

        _second_part=$((_max_group_value >> _zero_bits << _zero_bits))

        if ((_ipv6)); then

            _second_part=$(printf "%x" $_second_part)

        fi

        ((_count++))

        if [[ -z "$_first_part" ]]; then

            _res="$_second_part"

        else

            _res="${_first_part}${_seperator}${_second_part}"

        fi

    fi

    _count=$((_total_groups-_count))

    if [[ "$_count" -eq 0 ]]; then

        echo -n "$_res"

        return

    fi

    if ((_ipv6)) && [[ "$_count" -gt 1 ]] ; then

        # use condensed notion for IPv6

        _third_part=":"

    else

        _third_part=$(repeatedly_join_str "$_count" "0" "$_seperator")

    fi

    if [[ -z "$_res" ]] && ((!_ipv6)) ; then

        echo -n "${_third_part}"

    else

        echo -n "${_res}${_seperator}${_third_part}"

    fi

}

#$1: netdev name

#$2: srcaddr

#if it use static ip echo it, or echo null

kdump_static_ip() {

    local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag

    local _netmask _gateway _ipaddr _target _nexthop _prefix

    _ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}")

    if is_ipv6_address $_srcaddr; then

        _ipv6_flag="-6"

    fi

    if [ -n "$_ipaddr" ]; then

        _gateway=$(ip $_ipv6_flag route list dev $_netdev | \

                awk '/^default /{print $3}' | head -n 1)

        if [ "x" !=  "x"$_ipv6_flag ]; then

            # _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/"

            _netmask=${_ipaddr#*\/}

            _srcaddr="[$_srcaddr]"

            _gateway="[$_gateway]"

        else

            _prefix=$(cut -d'/' -f2 <<< "$_ipaddr")

            _netmask=$(cal_netmask_by_prefix "$_prefix" "$_ipv6_flag")

            if [[ "$?" -ne 0 ]]; then

                derror "Failed to calculate netmask for $_ipaddr"

                exit 1

            fi

        fi

        echo -n "${_srcaddr}::${_gateway}:${_netmask}::"

    fi

    /sbin/ip $_ipv6_flag route show | grep -v default |\

    grep ".*via.* $_netdev " | grep -v "^[[:space:]]*nexthop" |\

    while read _route; do

        _target=`echo $_route | cut -d ' ' -f1`

        _nexthop=`echo $_route | cut -d ' ' -f3`

        if [ "x" !=  "x"$_ipv6_flag ]; then

            _target="[$_target]"

            _nexthop="[$_nexthop]"

        fi

        echo "rd.route=$_target:$_nexthop:$kdumpnic"

    done >> ${initdir}/etc/cmdline.d/45route-static.conf

    kdump_handle_mulitpath_route $_netdev $_srcaddr $kdumpnic

}

kdump_handle_mulitpath_route() {

    local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag

    local _target _nexthop _route _weight _max_weight _rule

    if is_ipv6_address $_srcaddr; then

        _ipv6_flag="-6"

    fi

    while IFS="" read _route; do

        if [[ "$_route" =~ [[:space:]]+nexthop ]]; then

            _route=$(echo "$_route" | sed -e 's/^[[:space:]]*//')

            # Parse multipath route, using previous _target

            [[ "$_target" == 'default' ]] && continue

            [[ "$_route" =~ .*via.*\ $_netdev ]] || continue

            _weight=`echo "$_route" | cut -d ' ' -f7`

            if [[ "$_weight" -gt "$_max_weight" ]]; then

                _nexthop=`echo "$_route" | cut -d ' ' -f3`

                _max_weight=$_weight

                if [ "x" !=  "x"$_ipv6_flag ]; then

                    _rule="rd.route=[$_target]:[$_nexthop]:$kdumpnic"

                else

                    _rule="rd.route=$_target:$_nexthop:$kdumpnic"

                fi

            fi

        else

            [[ -n "$_rule" ]] && echo "$_rule"

            _target=`echo "$_route" | cut -d ' ' -f1`

            _rule="" _max_weight=0 _weight=0

        fi

    done >> ${initdir}/etc/cmdline.d/45route-static.conf\

        <<< "$(/sbin/ip $_ipv6_flag route show)"

    [[ -n $_rule ]] && echo $_rule >> ${initdir}/etc/cmdline.d/45route-static.conf

}

kdump_get_mac_addr() {

    cat /sys/class/net/$1/address

}

#Bonding or team master modifies the mac address

#of its slaves, we should use perm address

kdump_get_perm_addr() {

    local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')

    if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]

    then

        derror "Can't get the permanent address of $1"

    else

        echo "$addr"

    fi

}

# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0

# Because kernel assigned names are not persistent between 1st and 2nd

# kernel. We could probably end up with eth0 being eth1, eth0 being

# eth1, and naming conflict happens.

kdump_setup_ifname() {

    local _ifname

    # If ifname already has 'kdump-' prefix, we must be switching from

    # fadump to kdump. Skip prefixing 'kdump-' in this case as adding

    # another prefix may truncate the ifname. Since an ifname with

    # 'kdump-' is already persistent, this should be fine.

    if [[ $1 =~ eth* ]] && [[ ! $1 =~ ^kdump-* ]]; then

        _ifname="kdump-$1"

    else

        _ifname="$1"

    fi

    echo "$_ifname"

}

kdump_setup_bridge() {

    local _netdev=$1

    local _brif _dev _mac _kdumpdev

    for _dev in `ls /sys/class/net/$_netdev/brif/`; do

        _kdumpdev=$_dev

        if kdump_is_bond "$_dev"; then

            $(kdump_setup_bond "$_dev" "$(get_nmcli_connection_show_cmd_by_ifname "$_dev")")

            if [[ $? != 0 ]]; then

                exit 1

            fi

        elif kdump_is_team "$_dev"; then

            kdump_setup_team "$_dev"

        elif kdump_is_vlan "$_dev"; then

            kdump_setup_vlan "$_dev"

        else

            _mac=$(kdump_get_mac_addr $_dev)

            _kdumpdev=$(kdump_setup_ifname $_dev)

            echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf

        fi

        _brif+="$_kdumpdev,"

    done

    echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf

}

# drauct takes bond=<bondname>[:<bondslaves>:[:<options>]] syntax to parse

#    bond. For example:

#     bond=bond0:eth0,eth1:mode=balance-rr

kdump_setup_bond() {

    local _netdev="$1"

    local _nm_show_cmd="$2"

    local _dev _mac _slaves _kdumpdev _bondoptions

    for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do

        _mac=$(kdump_get_perm_addr $_dev)

        _kdumpdev=$(kdump_setup_ifname $_dev)

        echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf

        _slaves+="$_kdumpdev,"

    done

    echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf

    _bondoptions=$(get_nmcli_value_by_field "$_nm_show_cmd" "bond.options")

    if [[ -z "_bondoptions" ]]; then

        dwarning "Failed to get bond configuration via nmlci output. Now try sourcing ifcfg script."

        source_ifcfg_file $_netdev

        _bondoptions="$(echo $BONDING_OPTS | xargs echo | tr " " ",")"

    fi

    if [[ -z "_bondoptions" ]]; then

        derror "Get empty bond options"

        exit 1

    fi

    echo ":$_bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf

}

kdump_setup_team() {

    local _netdev=$1

    local _dev _mac _slaves _kdumpdev

    for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do

        _mac=$(kdump_get_perm_addr $_dev)

        _kdumpdev=$(kdump_setup_ifname $_dev)

        echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf

        _slaves+="$_kdumpdev,"

    done

    echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf

    #Buggy version teamdctl outputs to stderr!

    #Try to use the latest version of teamd.

    teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf

    if [ $? -ne 0 ]

    then

        derror "teamdctl failed."

        exit 1

    fi

    inst_dir /etc/teamd

    inst_simple ${initdir}/tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf"

    rm -f ${initdir}/tmp/$$-$_netdev.conf

}

kdump_setup_vlan() {

    local _netdev=$1

    local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"

    local _netmac="$(kdump_get_mac_addr $_phydev)"

    local _kdumpdev

    #Just support vlan over bond and team

    if kdump_is_bridge "$_phydev"; then

        derror "Vlan over bridge is not supported!"

        exit 1

    elif kdump_is_bond "$_phydev"; then

        $(kdump_setup_bond "$_phydev" "$(get_nmcli_connection_show_cmd_by_ifname "$_phydev")")

        if [[ $? != 0 ]]; then

            exit 1

        fi

        echo " vlan=$(kdump_setup_ifname $_netdev):$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf

    else

        _kdumpdev="$(kdump_setup_ifname $_phydev)"

        echo " vlan=$(kdump_setup_ifname $_netdev):$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf

    fi

}

# setup s390 znet cmdline

# $1: netdev (ifname)

# $2: nmcli connection show output

kdump_setup_znet() {

    local _netdev="$1"

    local _nmcli_cmd="$2"

    local s390_prefix="802-3-ethernet.s390-"

    local _options=""

    local NETTYPE

    local SUBCHANNELS

    NETTYPE=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}nettype")

    SUBCHANNELS=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}subchannels")

    _options=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}options")

    if [[ -z "$NETTYPE" || -z "$SUBCHANNELS" || -z "$_options" ]]; then

        dwarning "Failed to get znet configuration via nmlci output. Now try sourcing ifcfg script."

        source_ifcfg_file $_netdev

        for i in $OPTIONS; do

            _options=${_options},$i

        done

    fi

    if [[ -z "$NETTYPE" || -z "$SUBCHANNELS" || -z "$_options" ]]; then

        exit 1

    fi

    echo rd.znet=${NETTYPE},${SUBCHANNELS},${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf

}

kdump_get_ip_route()

{

    local _route=$(/sbin/ip -o route get to $1 2>&1)

    [ $? != 0 ] && die "Bad kdump network destination: $1"

    echo $_route

}

kdump_get_ip_route_field()

{

    if `echo $1 | grep -q $2`; then

        echo ${1##*$2} | cut -d ' ' -f1

    fi

}

kdump_get_remote_ip()

{

    local _remote=$(get_remote_host $1) _remote_temp

    if is_hostname $_remote; then

        _remote_temp=`getent ahosts $_remote | grep -v : | head -n 1`

        if [ -z "$_remote_temp" ]; then

            _remote_temp=`getent ahosts $_remote | head -n 1`

        fi

        _remote=`echo $_remote_temp | cut -d' ' -f1`

    fi

    echo $_remote

}

# Setup dracut to bring up network interface that enable

# initramfs accessing giving destination

# $1: destination host

kdump_install_net() {

    local _destaddr _srcaddr _route _netdev _nm_show_cmd kdumpnic

    local _static _proto _ip_conf _ip_opts _ifname_opts

    _destaddr=$(kdump_get_remote_ip $1)

    _route=$(kdump_get_ip_route $_destaddr)

    _srcaddr=$(kdump_get_ip_route_field "$_route" "src")

    _netdev=$(kdump_get_ip_route_field "$_route" "dev")

    _nm_show_cmd=$(get_nmcli_connection_show_cmd_by_ifname "$_netdev")

    _netmac=$(kdump_get_mac_addr $_netdev)

    kdumpnic=$(kdump_setup_ifname $_netdev)

    if [ "$(uname -m)" = "s390x" ]; then

        $(kdump_setup_znet "$_netdev" "$_nm_show_cmd")

        if [[ $? != 0 ]]; then

            derror "Failed to set up znet"

            exit 1

        fi

    fi

    _static=$(kdump_static_ip $_netdev $_srcaddr $kdumpnic)

    if [ -n "$_static" ]; then

        _proto=none

    elif is_ipv6_address $_srcaddr; then

        _proto=auto6

    else

        _proto=dhcp

    fi

    _ip_conf="${initdir}/etc/cmdline.d/40ip.conf"

    _ip_opts=" ip=${_static}$kdumpnic:${_proto}"

    # dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.

    # so we have to avoid adding duplicates

    # We should also check /proc/cmdline for existing ip=xx arg.

    # For example, iscsi boot will specify ip=xxx arg in cmdline.

    if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\

        ! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then

        echo "$_ip_opts" >> $_ip_conf

    fi

    if kdump_is_bridge "$_netdev"; then

        kdump_setup_bridge "$_netdev"

    elif kdump_is_bond "$_netdev"; then

        $(kdump_setup_bond "$_netdev" "$_nm_show_cmd")

        if [[ $? != 0 ]]; then

            exit 1

        fi

    elif kdump_is_team "$_netdev"; then

        kdump_setup_team "$_netdev"

    elif kdump_is_vlan "$_netdev"; then

        kdump_setup_vlan "$_netdev"

    else

        _ifname_opts=" ifname=$kdumpnic:$_netmac"

        echo "$_ifname_opts" >> $_ip_conf

    fi

    kdump_setup_dns "$_netdev" "$_nm_show_cmd"

    if [ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]; then

        # network-manager module needs this parameter

        echo "rd.neednet" >> ${initdir}/etc/cmdline.d/50neednet.conf

    fi

    # Save netdev used for kdump as cmdline

    # Whoever calling kdump_install_net() is setting up the default gateway,

    # ie. bootdev/kdumpnic. So don't override the setting if calling

    # kdump_install_net() for another time. For example, after setting eth0 as

    # the default gate way for network dump, eth1 in the fence kdump path will

    # call kdump_install_net again and we don't want eth1 to be the default

    # gateway.

    if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] &&

       [ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then

        echo "kdumpnic=$kdumpnic" > ${initdir}/etc/cmdline.d/60kdumpnic.conf

        echo "bootdev=$kdumpnic" > ${initdir}/etc/cmdline.d/70bootdev.conf

    fi

}

# install etc/kdump/pre.d and /etc/kdump/post.d

kdump_install_pre_post_conf() {

    if [ -d /etc/kdump/pre.d ]; then

        for file in /etc/kdump/pre.d/*; do

            if [ -x "$file" ]; then

                dracut_install $file

            elif [ $file != "/etc/kdump/pre.d/*" ]; then

               echo "$file is not executable"

            fi

        done

    fi

    if [ -d /etc/kdump/post.d ]; then

        for file in /etc/kdump/post.d/*; do

            if [ -x "$file" ]; then

                dracut_install $file

            elif [ $file != "/etc/kdump/post.d/*" ]; then

                echo "$file is not executable"

            fi

        done

    fi

}

default_dump_target_install_conf()

{

    local _target _fstype

    local _mntpoint _save_path

    is_user_configured_dump_target && return

    _save_path=$(get_bind_mount_source $(get_save_path))

    _target=$(get_target_from_path $_save_path)

    _mntpoint=$(get_mntpoint_from_target $_target)

    _fstype=$(get_fs_type_from_target $_target)

    if is_fs_type_nfs $_fstype; then

        kdump_install_net "$_target"

        _fstype="nfs"

    else

        _target=$(kdump_get_persistent_dev $_target)

    fi

    echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf

    # don't touch the path under root mount

    if [ "$_mntpoint" != "/" ]; then

        _save_path=${_save_path##"$_mntpoint"}

    fi

    #erase the old path line, then insert the parsed path

    sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf

    echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf

}

#install kdump.conf and what user specifies in kdump.conf

kdump_install_conf() {

    local _opt _val _pdev

    (read_strip_comments /etc/kdump.conf) > ${initdir}/tmp/$$-kdump.conf

    while read _opt _val;

    do

        # remove inline comments after the end of a directive.

        case "$_opt" in

        raw)

            _pdev=$(persistent_policy="by-id" kdump_get_persistent_dev $_val)

            sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf

            ;;

        ext[234]|xfs|btrfs|minix)

            _pdev=$(kdump_get_persistent_dev $_val)

            sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf

            ;;

        ssh|nfs)

            kdump_install_net "$_val"

            ;;

        dracut_args)

            if [[ $(get_dracut_args_fstype "$_val") = nfs* ]] ; then

                kdump_install_net "$(get_dracut_args_target "$_val")"

            fi

            ;;

        kdump_pre|kdump_post|extra_bins)

            dracut_install $_val

            ;;

        core_collector)

            dracut_install "${_val%%[[:blank:]]*}"

            ;;

        esac

    done <<< "$(read_strip_comments /etc/kdump.conf)"

    kdump_install_pre_post_conf

    default_dump_target_install_conf

    kdump_configure_fence_kdump  "${initdir}/tmp/$$-kdump.conf"

    inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"

    rm -f ${initdir}/tmp/$$-kdump.conf

}

# Default sysctl parameters should suffice for kdump kernel.

# Remove custom configurations sysctl.conf & sysctl.d/*

remove_sysctl_conf() {

    # As custom configurations like vm.min_free_kbytes can lead

    # to OOM issues in kdump kernel, avoid them

    rm -f "${initdir}/etc/sysctl.conf"

    rm -rf "${initdir}/etc/sysctl.d"

    rm -rf "${initdir}/run/sysctl.d"

    rm -rf "${initdir}/usr/lib/sysctl.d"

}

kdump_iscsi_get_rec_val() {

    local result

    # The open-iscsi 742 release changed to using flat files in

    # /var/lib/iscsi.

    result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ")

    result=${result##* = }

    echo $result

}

kdump_get_iscsi_initiator() {

    local _initiator

    local initiator_conf="/etc/iscsi/initiatorname.iscsi"

    [ -f "$initiator_conf" ] || return 1

    while read _initiator; do

        [ -z "${_initiator%%#*}" ] && continue # Skip comment lines

        case $_initiator in

            InitiatorName=*)

                initiator=${_initiator#InitiatorName=}

                echo "rd.iscsi.initiator=${initiator}"

                return 0;;

            *) ;;

        esac

    done < ${initiator_conf}

    return 1

}

# Figure out iBFT session according to session type

is_ibft() {

    [ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ]

}

kdump_setup_iscsi_device() {

    local path=$1

    local tgt_name; local tgt_ipaddr;

    local username; local password; local userpwd_str;

    local username_in; local password_in; local userpwd_in_str;

    local netroot_str ; local initiator_str;

    local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"

    local initiator_conf="/etc/iscsi/initiatorname.iscsi"

    dinfo "Found iscsi component $1"

    # Check once before getting explicit values, so we can bail out early,

    # e.g. in case of pure-hardware(all-offload) iscsi.

    if ! /sbin/iscsiadm -m session -r ${path} &>/dev/null ; then

        return 1

    fi

    if is_ibft ${path}; then

        return

    fi

    # Remove software iscsi cmdline generated by 95iscsi,

    # and let kdump regenerate here.

    rm -f ${initdir}/etc/cmdline.d/95iscsi.conf

    tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name")

    tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address")

    # get and set username and password details

    username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")

    [ "$username" == "<empty>" ] && username=""

    password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")

    [ "$password" == "<empty>" ] && password=""

    username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in")

    [ -n "$username" ] && userpwd_str="$username:$password"

    # get and set incoming username and password details

    [ "$username_in" == "<empty>" ] && username_in=""

    password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in")

    [ "$password_in" == "<empty>" ] && password_in=""

    [ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in"

    kdump_install_net "$tgt_ipaddr"

    # prepare netroot= command line

    # FIXME: Do we need to parse and set other parameters like protocol, port

    #        iscsi_iface_name, netdev_name, LUN etc.

    if is_ipv6_address $tgt_ipaddr; then

        tgt_ipaddr="[$tgt_ipaddr]"

    fi

    netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"

    [[ -f $netroot_conf ]] || touch $netroot_conf

    # If netroot target does not exist already, append.

    if ! grep -q $netroot_str $netroot_conf; then

         echo $netroot_str >> $netroot_conf

         dinfo "Appended $netroot_str to $netroot_conf"

    fi

    # Setup initator

    initiator_str=$(kdump_get_iscsi_initiator)

    [ $? -ne "0" ] && derror "Failed to get initiator name" && return 1

    # If initiator details do not exist already, append.

    if ! grep -q "$initiator_str" $netroot_conf; then

         echo "$initiator_str" >> $netroot_conf

         dinfo "Appended "$initiator_str" to $netroot_conf"

    fi

}

kdump_check_iscsi_targets () {

    # If our prerequisites are not met, fail anyways.

    type -P iscsistart >/dev/null || return 1

    kdump_check_setup_iscsi() (

        local _dev

        _dev=$1

        [[ -L /sys/dev/block/$_dev ]] || return

        cd "$(readlink -f /sys/dev/block/$_dev)"

        until [[ -d sys || -d iscsi_session ]]; do

            cd ..

        done

        [[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"

    )

    [[ $hostonly ]] || [[ $mount_needs ]] && {

        for_each_host_dev_and_slaves_all kdump_check_setup_iscsi

    }

}

# hostname -a is deprecated, do it by ourself

get_alias() {

    local ips

    local entries

    local alias_set

    ips=$(hostname -I)

    for ip in $ips

    do

            # in /etc/hosts, alias can come at the 2nd column

            entries=$(grep $ip /etc/hosts | awk '{ $1=""; print $0 }')

            if [ $? -eq 0 ]; then

                    alias_set="$alias_set $entries"

            fi

    done

    echo $alias_set

}

is_localhost() {

    local hostnames=$(hostname -A)

    local shortnames=$(hostname -A -s)

    local aliasname=$(get_alias)

    local nodename=$1

    hostnames="$hostnames $shortnames $aliasname"

    for name in ${hostnames}; do

        if [ "$name" == "$nodename" ]; then

            return 0

        fi

    done

    return 1

}

# retrieves fence_kdump nodes from Pacemaker cluster configuration

get_pcs_fence_kdump_nodes() {

    local nodes